We currently rewrite
(TESTQ (MOVQconst [c] x)) into (TESTQconst [c] x)
and (TESTQconst [-1] x) into (TESTQ x x)
if x is a (MOVQconst [-1]) we will be stuck in the endless rewrite loop.
Don't perform the rewrite in such cases.
Fixes#25006
Change-Id: I77f561ba2605fc104f1e5d5c57f32e9d67a2c000
Reviewed-on: https://go-review.googlesource.com/108879
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Rewrite x<<1+c into x+x+c, which can be expressed as a single LEAQ/LEAL.
Bit of a special case, but the single-instruction
LEA is both shorter and faster than SHL then ADD.
Triggers 293 times during make.bash.
Change-Id: I3f09c8e9a8f3859d1eeed336f095fc3ada79c2c1
Reviewed-on: https://go-review.googlesource.com/108938
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This triggers three times while building std,
once in image/png and twice in go/internal/gccgoimporter.
There are no instances in std in which a more aggressive
optimization would have triggered.
This doesn't necessarily avoid an allocation,
because escape analysis is already able in many cases
to use a temporary backing for the string,
but it does at a minimum avoid the runtime call and copy.
Fixes#24937
Change-Id: I7019e85638ba8cd7e2f03890e672558b858579bc
Reviewed-on: https://go-review.googlesource.com/108035
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Due to some recent optimizations related to the compare
instruction, DS-form load instructions started to be used
to load 8-byte go.strings. This can cause link time errors
if the go.string is not aligned to 4 bytes.
For DS-form instructions, the value in the offset field must
be a multiple of 4. If the offset is known at the time the
rules are processed, a DS-form load will not be chosen. But for
go.strings, the offset is not known at that time, but a
relocation is generated indicating that the linker should fill
in the DS relocation. When the linker tries to fill in the
relocation, if the offset is not aligned properly, a link error
will occur.
To fix this, when loading a go.string using MOVDload, the full
address of the go.string is generated and loaded into the base
register. Then the go.string is loaded with a 0 offset field.
Added a testcase that reproduces this problem.
Fixes#24799
Change-Id: I6a154e8e1cba64eae290be0fbcb608b75884ecdd
Reviewed-on: https://go-review.googlesource.com/107855
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The escape analysis models the flow of "content" of X with a
level of "indirection" (OIND node) of X. This content can be
pointer dereference, or slice/string element. For the latter
case, the type of the OIND node should be the element type of
the slice/string. This CL fixes this. In particular, this
matters when the element type is pointerless, where the data
flow should not cause any escape.
Fixes#15730.
Change-Id: Iba9f92898681625e7e3ddef76ae65d7cd61c41e0
Reviewed-on: https://go-review.googlesource.com/107597
Reviewed-by: David Chase <drchase@google.com>
If both inputs are constant offsets from the same pointer then we
can evaluate NeqPtr and EqPtr at compile time. Triggers a few times
during all.bash. Removes a conditional branch in the following
code:
copy(x[1:], x[:])
This branch was recently added as an optimization in CL 94596. We
now skip the memmove if the pointers are equal. However, in the
above code we know at compile time that they are never equal.
Also, when the offset is variable, check if the offset is zero
rather than if the pointers are equal. For example:
copy(x[a:], x[:])
This would now skip the copy if a == 0, rather than if x + a == x.
Finally I've also added a rule to make IsNonNil true for pointers
to values on the stack. The nil check elimination pass will catch
these anyway, but eliminating them here might eliminate branches
earlier.
Change-Id: If72f436fef0a96ad0f4e296d3a1f8b6c3e712085
Reviewed-on: https://go-review.googlesource.com/106635
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
While writing CL 107315, I went back and forth for the syntax used for
constraints of build environments in which the architecture did not
support varitants ("plan9/amd64" vs "plan9/amd64/"). I eventually
settled for the latter because the code required less heuristics
(think parsing "plan9/386" vs "386/sse2") but there were a few
leftovers in code and comments.
Change-Id: I9d9a008f3814f9a1642609650eb571e7f1a675cf
Reviewed-on: https://go-review.googlesource.com/107338
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes the codegen testsuite automatically test all
architecture variants for architecture specified in tests. For
instance, if a test file specifies a "arm" test, it will be
automatically run on all GOARM variants (5,6,7), to increase
the coverage.
The CL also introduces a syntax to specify only a specific
variant (eg: "arm/7") in case the test makes sense only there.
The same syntax also allows to specify the operating system
in case it matters (eg: "plan9/386/sse2").
Fixes#24658
Change-Id: I2eba8b918f51bb6a77a8431a309f8b71af07ea22
Reviewed-on: https://go-review.googlesource.com/107315
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And remove it from asmtest. Next CL will remove the whole
asmtest infrastructure.
Change-Id: I5851bf7c617456d62a3c6cffacf70252df7b056b
Reviewed-on: https://go-review.googlesource.com/107335
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The escape analysis models "loop depth". If the address of an
expression is assigned to something defined at a lower (outer)
loop depth, the escape analysis decides it escapes. However, it
uses the loop depth of the address operator instead of where
the RHS is defined. This causes an unnecessary escape if there is
an assignment inside a loop but the RHS is defined outside the
loop. This CL propagates the loop depth.
Fixes#24730.
Change-Id: I5ff1530688bdfd90561a7b39c8be9bfc009a9dae
Reviewed-on: https://go-review.googlesource.com/105257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
I was wrong. There was a need to loop here.
Fixes#24761
Change-Id: If13b3ab72febde930bdaebdddd1c05e0d0446020
Reviewed-on: https://go-review.googlesource.com/105615
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
And delete them from asm_test.
Also delete an arm64 cmov test has been already ported to the new test
harness.
Change-Id: I4458721e1f512bc9ecbbe1c22a2c9c7109ad68fe
Reviewed-on: https://go-review.googlesource.com/106335
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The check was previously disallowing package main from even importing
a non-function symbol named "main".
Fixes#24801.
Change-Id: I849b9713890429f0a16860ef16b5dc7e970d04a4
Reviewed-on: https://go-review.googlesource.com/106120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I24f421b87e8cb4770c887a6dfd58eacd0088947d
Reviewed-on: https://go-review.googlesource.com/106056
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I9a75efe9858ef9d7ac86065f860c2ae3f25b0941
Reviewed-on: https://go-review.googlesource.com/105597
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also, when statically building itabs, compare *types.Sym instead of
name alone so that method sets with duplicate non-exported methods are
handled correctly.
Fixes#24693.
Change-Id: I2db8a3d6e80991a71fef5586a15134b6de116269
Reviewed-on: https://go-review.googlesource.com/105039
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, constant pointer-typed expressions could use either Mpint
or NilVal as their Val depending on their construction, but const.go
expects each type to have a single corresponding Val kind.
This CL changes pointer-typed expressions to exclusively use Mpint.
Fixes#21221.
Change-Id: I6ba36c9b11eb19a68306f0b296acb11a8c254c41
Reviewed-on: https://go-review.googlesource.com/105315
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Multi-byte comparison operations were used on amd64, arm64, i386
and s390x for comparisons with constant arrays, but only amd64 and
i386 for comparisons with string constants. This CL combines the
check for platform capability, since they have the same requirements,
and also enables both on ppc64le which also supports load merging.
Note that these optimizations currently use little endian byte order
which results in byte reversal instructions on s390x. This should
be fixed at some point.
Change-Id: Ie612d13359b50c77f4d7c6e73fea4a59fa11f322
Reviewed-on: https://go-review.googlesource.com/102558
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I0e33d58274951ab5acb67b0117b60ef617ea887a
Reviewed-on: https://go-review.googlesource.com/105735
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Method expressions with anonymous receiver types like "struct { T }.m"
require wrapper functions, which we weren't always creating. This in
turn resulted in linker errors.
This CL ensures that we generate wrapper functions for any anonymous
receiver types used in a method expression.
Fixes#22444.
Change-Id: Ia8ac27f238c2898965e57b82a91d959792d2ddd4
Reviewed-on: https://go-review.googlesource.com/105044
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There were multiple ad hoc ways to create method symbols, with subtle
and confusing differences between them. This CL unifies them into a
single well-documented encoding and implementation.
This introduces some inconsequential changes to symbol format for the
sake of simplicity and consistency. Two notable changes:
1) Symbol construction is now insensitive to the package currently
being compiled. Previously, non-exported methods on anonymous types
received different method symbols depending on whether the method was
local or imported.
2) Symbols for method values parenthesized non-pointer receiver types
and non-exported method names, and also always package-qualified
non-exported method names. Now they use the same rules as normal
method symbols.
The methodSym function is also now stricter about rejecting
non-sensical method/receiver combinations. Notably, this means that
typecheckfunc needs to call addmethod to validate the method before
calling declare, which also means we no longer emit errors about
redeclaring bogus methods.
Change-Id: I9501c7a53dd70ef60e5c74603974e5ecc06e2003
Reviewed-on: https://go-review.googlesource.com/104876
Reviewed-by: Robert Griesemer <gri@golang.org>
Since it's been reliably failing on one of the linux-arm builders
(arm5spacemonkey) for a long time.
Updates #24221.
Change-Id: I8fccc7e16631de497ccc2c285e510a110a93ad95
Reviewed-on: https://go-review.googlesource.com/104535
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: Id533130470da9176a401cb94972f626f43a62148
Reviewed-on: https://go-review.googlesource.com/103656
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The logic in addBranchRestrictions didn't allow to correctly
model OpIs(Slice)Bound for signed domain, and it was also partly
implemented within addRestrictions.
Thanks to the previous changes, it is now possible to handle
the negative conditions correctly, so that we can learn
both signed/LT + unsigned/LT on the positive side, and
signed/GE + unsigned/GE on the negative side (but only if
the index can be proved to be non-negative).
This is able to prove ~50 more slice accesses in std+cmd.
Change-Id: I9858080dc03b16f85993a55983dbc4b00f8491b0
Reviewed-on: https://go-review.googlesource.com/104037
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Don't report errors if we don't have a correct type switch
guard; instead ignore it and leave it to the type-checker
to report the error. This leads to better error messages
concentrating on the type switch guard rather than errors
around (confusing) syntactic details.
Also clean up some code setting up AssertExpr (they never
have a nil Type field) and remove some incorrect TODOs.
Fixes#24470.
Change-Id: I69512f36e0417e3b5ea9c8856768e04b19d654a8
Reviewed-on: https://go-review.googlesource.com/103615
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When test/run script was removed, these two tests
were changed to be executed by test/run.go.
Because errchk does not exit with non-zero status on
errors, they were silently failing for a while.
This change makes 2 things:
1. Compile tested packages in GOROOT/test to match older runner script
behavior (strictly required only in bug345, optional in bug248)
2. Check command output with "(?m)^BUG" regexp.
It approximates older `grep -q '^BUG' that was used before.
See referenced issue for detailed explanation.
Fixes#24629
Change-Id: Ie888dcdb4e25cdbb19d434bbc5cb03eb633e9ee8
Reviewed-on: https://go-review.googlesource.com/104095
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 38338 introduced SSA rules to optimize two types of pointer equality
tests: a pointer compared with itself, and comparison of addresses taken
of two symbols which may have the same base. This patch adds rules to
apply the same optimization to pointer inequality tests, which also ensures
that two pointers to zero-width types cannot be both equal and unequal
at the same time.
Fixes#24503.
Change-Id: Ic828aeb86ae2e680caf66c35f4c247674768a9ba
Reviewed-on: https://go-review.googlesource.com/102275
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
And delete them from asm_test.
Change-Id: Idfe1249052d82d15b9c30b292c78656a0bf7b48d
Reviewed-on: https://go-review.googlesource.com/103315
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change modifies the codegen test harness driver so that it no
longer modifies the environment GOOS/GOARCH, since that seems to cause
flakiness in other concurrently-running tests.
The change also enables the codegen tests in run.go.
Fixes#24538
Change-Id: I997ac1eb38eb92054efff67fe5c4d3cccc86412b
Reviewed-on: https://go-review.googlesource.com/103455
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The escape_because.go test file (which tests the "because" escape
explainations printed by `-m -m`) cointains a machine-generated list
of all the escape reasons seen in the escape tests.
The list appears to be outdated; moreove a new escape reason was added
in CL 102895. This change re-generates the list.
Change-Id: Idc721c6bbfe9516895b5cf1e6d09b77deda5a3dd
Reviewed-on: https://go-review.googlesource.com/103375
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes `-m -m` print a better explanation for the case
where a slice is marked as escaping and heap-allocated because it
has a non-constant len/cap.
Fixes#24578
Change-Id: I0ebafb77c758a99857d72b365817bdba7b446cc0
Reviewed-on: https://go-review.googlesource.com/102895
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
In expandmeth, we call expand1/expand0 to build a list of all
candidate methods to promote, and then we use dotpath to prune down
which names actually resolve to a promoted method and how.
However, previously we still computed "followsptr" based on the
expand1/expand0 traversal (which is depth-first), rather than
dotpath (which is breadth-first). The result is that we could
sometimes end up miscomputing whether a particular promoted method
involves a pointer traversal, which could result in bad code
generation for method trampolines.
Fixes#24547.
Change-Id: I57dc014466d81c165b05d78b98610dc3765b7a90
Reviewed-on: https://go-review.googlesource.com/102618
Reviewed-by: Robert Griesemer <gri@golang.org>
And delete them from asm_test.
Change-Id: I34fcf85ae8ce09cd146fe4ce6a0ae7616bd97e2d
Reviewed-on: https://go-review.googlesource.com/102296
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And remove them from asm_test.
Change-Id: I1ca29b40546d6de06f20bfd550ed8ff87f495454
Reviewed-on: https://go-review.googlesource.com/102115
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I64c512bfef3b3da6db5c5d29277675dade28b8ab
Reviewed-on: https://go-review.googlesource.com/101595
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
The atomic add instructions modify the condition code and so need to
be marked as clobbering flags.
Fixes#24449.
Change-Id: Ic69c8d775fbdbfb2a56c5e0cfca7a49c0d7f6897
Reviewed-on: https://go-review.googlesource.com/101455
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
And delete them from asm_test.
Change-Id: I3cf0934706a640136cb0f646509174f8c1bf3363
Reviewed-on: https://go-review.googlesource.com/101395
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
And delete them from asm_test.
Change-Id: Ibdaca3496eefc73c731b511ddb9636a1f3dff68c
Reviewed-on: https://go-review.googlesource.com/100915
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_test.
Change-Id: I29c8d098a8893e6b669b6272a2f508985ac9d618
Reviewed-on: https://go-review.googlesource.com/100876
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts commit 080187f4f7.
It broke build of golang.org/x/exp/shiny/iconvg
See issue 24395 for details
Change-Id: Ifd6134f6214e6cee40bd3c63c32941d5fc96ae8b
Reviewed-on: https://go-review.googlesource.com/100755
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This change ports all the remaining tests checking that small memmoves
are replaced with MOVs to the new codegen test harness, and deletes
them from the asm_test file.
Change-Id: I01c94b441e27a5d61518035af62d62779dafeb56
Reviewed-on: https://go-review.googlesource.com/100476
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add tests for the "negative size argument in make.*" and "size argument
too large in make.*" error messages to appear at call sites in case the
size is a const defined on another line.
As suggested by Matthew in a comment on CL 69910.
Change-Id: I5c33d4bec4e3d20bb21fe8019df27999997ddff3
Reviewed-on: https://go-review.googlesource.com/100395
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
As a side effect of working on mid-stack inlining, we've fixed support
for inlining variadic functions. Might as well enable it.
Change-Id: I7f555f8b941969791db7eb598c0b49f6dc0820aa
Reviewed-on: https://go-review.googlesource.com/100456
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, order desugars map assignment operations like
m[k] op= r
into
m[k] = m[k] op r
which in turn is transformed during walk into:
tmp := *mapaccess(m, k)
tmp = tmp op r
*mapassign(m, k) = tmp
However, this is suboptimal, as we could instead produce just:
*mapassign(m, k) op= r
One complication though is if "r == 0", then "m[k] /= r" and "m[k] %=
r" will panic, and they need to do so *before* calling mapassign,
otherwise we may insert a new zero-value element into the map.
It would be spec compliant to just emit the "r != 0" check before
calling mapassign (see #23735), but currently these checks aren't
generated until SSA construction. For now, it's simpler to continue
desugaring /= and %= into two map indexing operations.
Fixes#23661.
Change-Id: I46e3739d9adef10e92b46fdd78b88d5aabe68952
Reviewed-on: https://go-review.googlesource.com/91557
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
cmd/asm now supports three-operand form of IMUL,
so instead of using IMUL with resultInArg0, emit IMUL3 instruction.
This results in less redundant MOVs where SSA assigns
different registers to input[0] and dst arguments.
Note: these have exactly the same encoding when reg0=reg1:
IMUL3x $const, reg0, reg1
IMULx $const, reg
Two-operand IMULx is like a crippled IMUL3x, with dst fixed to input[0].
This is why we don't bother to generate IMULx for the case where
dst is the same as input[0].
Change-Id: I4becda475b3dffdd07b6fdf1c75bacc82af654e4
Reviewed-on: https://go-review.googlesource.com/99656
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Remove old tests from asm_test.
Change-Id: Ib408ec7faa60068bddecf709b93ce308e0ef665a
Reviewed-on: https://go-review.googlesource.com/100075
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
This change adds a README file inside the test/codegen directory,
explaining how to run the codegen tests and the syntax of the regexps
comments used to match assembly instructions.
Change-Id: Ica4eb3ffa9c6975371538cc8ae0ac3c1a3a03baf
Reviewed-on: https://go-review.googlesource.com/99156
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from asm_go.
Change-Id: I0057cbd90ca55fa51c596e32406e190f3866f93e
Reviewed-on: https://go-review.googlesource.com/99815
Reviewed-by: Keith Randall <khr@golang.org>
Only RotateLeft{64,32} were tested, and just for ppc64. This CL adds
tests for RotateLeft{64,32,16,8} on arm64 and amd64/386, for the cases
where the calls are actually instrinsified.
RotateLeft tests (the last ones for math/bits functions) are deleted
from asm_test.
This CL also adds a space between the "//" and the arch name in the
comments, to uniform this file to the style used in all the other
files.
Change-Id: Ifc2a27261d70bcc294b4ec64490d8367f62d2b89
Reviewed-on: https://go-review.googlesource.com/99596
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This adds four new deductions to the prove pass, all related to adding
or subtracting one from a value. This is the first hint of actual
arithmetic relations in the prove pass.
The most effective of these is
x-1 >= w && x > min ⇒ x > w
This helps eliminate bounds checks in code like
if x > 0 {
// do something with s[x-1]
}
Altogether, these deductions prove an additional 260 branches in std
and cmd. Furthermore, they will let us eliminate some tricky
compiler-inserted panics in the runtime that are interfering with
static analysis.
Fixes#23354.
Change-Id: I7088223e0e0cd6ff062a75c127eb4bb60e6dce02
Reviewed-on: https://go-review.googlesource.com/87480
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
This adds a few simple deductions to the prove pass' fact table to
derive unsigned concrete limits from signed concrete limits where
possible.
This tweak lets the pass prove 70 additional branch conditions in std
and cmd.
This is based on a comment from the recently-deleted factsTable.get:
"// TODO: also use signed data if lim.min >= 0".
Change-Id: Ib4340249e7733070f004a0aa31254adf5df8a392
Reviewed-on: https://go-review.googlesource.com/87479
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Keith Randall <khr@golang.org>
Currently the prove pass uses implication queries. For each block, it
collects the set of branch conditions leading to that block, and
queries this fact table for whether any of these facts imply the
block's own branch condition (or its inverse). This works remarkably
well considering it doesn't do any deduction on these facts, but it
has various downsides:
1. It requires an implementation both of adding facts to the table and
determining implications. These are very nearly duals of each
other, but require separate implementations. Likewise, the process
of asserting facts of dominating branch conditions is very nearly
the dual of the process of querying implied branch conditions.
2. It leads to less effective use of derived facts. For example, the
prove pass currently derives facts about the relations between len
and cap, but can't make use of these unless a branch condition is
in the exact form of a derived fact. If one of these derived facts
contradicts another fact, it won't notice or make use of this.
This CL changes the approach of the prove pass to instead use
*contradiction* instead of implication. Rather than ever querying a
branch condition, it simply adds branch conditions to the fact table.
If this leads to a contradiction (specifically, it makes the fact set
unsatisfiable), that branch is impossible and can be cut. As a result,
1. We can eliminate the code for determining implications
(factsTable.get disappears entirely). Also, there is now a single
implementation of visiting and asserting branch conditions, since
we don't have to flip them around to treat them as facts in one
place and queries in another.
2. Derived facts can be used effectively. It doesn't matter *why* the
fact table is unsatisfiable; a contradiction in any of the facts is
enough.
3. As an added benefit, it's now quite easy to avoid traversing beyond
provably-unreachable blocks. In contrast, the current
implementation always visits all blocks.
The prove pass already has nearly all of the mechanism necessary to
compute unsatisfiability, which means this both simplifies the code
and makes it more powerful.
The only complication is that the current implication procedure has a
hack for dealing with the 0 <= Args[0] condition of OpIsInBounds and
OpIsSliceInBounds. We replace this with asserting the appropriate fact
when we process one of these conditions. This seems much cleaner
anyway, and works because we can now take advantage of derived facts.
This has no measurable effect on compiler performance.
Effectiveness:
There is exactly one condition in all of std and cmd that this fails
to prove that the old implementation could: (int64(^uint(0)>>1) < x)
in encoding/gob. This can never be true because x is an int, and it's
basically coincidence that the old code gets this. (For example, it
fails to prove the similar (x < ^int64(^uint(0)>>1)) condition that
immediately precedes it, and even though the conditions are logically
unrelated, it wouldn't get the second one if it hadn't first processed
the first!)
It does, however, prove a few dozen additional branches. These come
from facts that are added to the fact table about the relations
between len and cap. These were almost never queried directly before,
but could lead to contradictions, which the unsat-based approach is
able to use.
There are exactly two branches in std and cmd that this implementation
proves in the *other* direction. This sounds scary, but is okay
because both occur in already-unreachable blocks, so it doesn't matter
what we chose. Because the fact table logic is sound but incomplete,
it fails to prove that the block isn't reachable, even though it is
able to prove that both outgoing branches are impossible. We could
turn these blocks into BlockExit blocks, but it doesn't seem worth the
trouble of the extra proof effort for something that happens twice in
all of std and cmd.
Tests:
This CL updates test/prove.go to change the expected messages because
it can no longer give a "reason" why it proved or disproved a
condition. It also adds a new test of a branch it couldn't prove
before.
It mostly guts test/sliceopt.go, removing everything related to slice
bounds optimizations and moving a few relevant tests to test/prove.go.
Much of this test is actually unreachable. The new prove pass figures
this out and doesn't try to prove anything about the unreachable
parts. The output on the unreachable parts is already suspect because
anything can be proved at that point, so it's really just a regression
test for an algorithm the compiler no longer uses.
This is a step toward fixing #23354. That issue is quite easy to fix
once we can use derived facts effectively.
Change-Id: Ia48a1b9ee081310579fe474e4a61857424ff8ce8
Reviewed-on: https://go-review.googlesource.com/87478
Reviewed-by: Keith Randall <khr@golang.org>
And delete them from the asm_test.go file.
Change-Id: I124c8c352299646ec7db0968cdb0fe59a3b5d83d
Reviewed-on: https://go-review.googlesource.com/99475
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This was already done for normal parameters, and the same logic
applies for receiver parameters too.
Updates #24305.
Change-Id: Ia2a46f68d14e8fb62004ff0da1db0f065a95a1b7
Reviewed-on: https://go-review.googlesource.com/99335
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This recently added arm64 memmove codegen check:
func movesmall() {
// arm64:-"memmove"
x := [...]byte{1, 2, 3, 4, 5, 6, 7}
copy(x[1:], x[:])
}
is not correct, for two reasons:
1. regexps are matched from the start of the disasm line (excluding
line information). This mean that a negative -"memmove" check will
pass against a 'CALL runtime.memmove' line because the line does
not start with 'memmove' (its starts with CALL...).
The way to specify no 'memmove' match whatsoever on the line is
-".*memmove"
2. AFAIK comments on their own line are matched against the first
subsequent non-comment line. So the code above only verifies that
the x := ... line does not generate a memmove. The comment should
be moved near the copy() line, if it's that one we want to not
generate a memmove call.
The fact that the test above is not effective can be checked by
running `go run run.go -v codegen` in the toplevel test directory with
a go1.10 toolchain (that does not have the memmove-elision
optimization). The test will still pass (it shouldn't).
This change changes the regexp to -".*memmove" and moves it near the
line it needs to (not)match.
Change-Id: Ie01ef4d775e77d92dc8d8b7856b89b200f5e5ef2
Reviewed-on: https://go-review.googlesource.com/98977
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
And remove them from ssa_test.
Change-Id: If767af662801219774d1bdb787c77edfa6067770
Reviewed-on: https://go-review.googlesource.com/98976
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Current implementation doesn't consider MOVDreg type operand and fail to combine
it into larger store. This patch fixes the issue.
Fixes#24242
Change-Id: I7d68697f80e76f48c3528ece01a602bf513248ec
Reviewed-on: https://go-review.googlesource.com/98397
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
And remove them from ssa_test.
Change-Id: I3efac5fea529bb0efa2dae32124530482ba5058e
Reviewed-on: https://go-review.googlesource.com/98815
Reviewed-by: Keith Randall <khr@golang.org>
And remove them from ssa_test.
Change-Id: Ib5de5c0d908f23915e0847eca338cacf2fa5325b
Reviewed-on: https://go-review.googlesource.com/98795
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This change move bits.Len* intrinsification tests to the new codegen
test harness, removing them from the old ssa_test file. Five different
test functions (one for each bit.Len function tested) was used, to
avoid possible unwanted interactions between multiple calls inside one
function.
Change-Id: Iffd5be55b58e88597fa30a562a28dacb01236d8b
Reviewed-on: https://go-review.googlesource.com/98156
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
This CL moves the load/store combining tests into asmcheck.
In addition at being more compact, it's also now easier to
spot what it is missing in each architecture.
While doing so, I think I uncovered a bug in ppc64le and arm64
rules, because they fail to load/store combine in non-trivial
functions. Not sure why, I'll open an issue.
Change-Id: Ia1572d53c0553d9104f3e52b95e4d1768a8440a3
Reviewed-on: https://go-review.googlesource.com/98441
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Before this change, in case of any failure, asmcheck was
dumping to stderr the whole output of compile -S, which
can be very long if it contains multiple functions.
Make it so it filters the output to only display the
assembly output of functions for which at least one opcode
check failed. This greatly simplifies debugging.
Change-Id: I1bbf54473b8252a3384e2c1dade82d926afc119d
Reviewed-on: https://go-review.googlesource.com/98444
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, the top-level testsuite always uses whatever version
of Go is found in the PATH to execute all the tests. This
forces the developers to tweak the PATH to run the testsuite.
Change it to use the same version of Go used to run run.go.
This allows developers to run the testsuite using the tip
compiler by simply saying "../bin/go run run.go".
I think this is a better solution compared to always forcing
"../bin/go", because it allows developers to run the testsuite
using different Go versions, for instance to check if a new
test is fixed in tip compared to the installed compiler.
Fixes#24217
Change-Id: I41b299c753b6e77c41e28be9091b2b630efea9d2
Reviewed-on: https://go-review.googlesource.com/98439
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In RET instruction, the operand is the return jump's target,
which should be put in Prog.To.
Add an action "buildrundir" to the test driver, which builds
(compile+assemble+link) the code in a directory and runs the
resulting binary.
Fixes#23838.
Change-Id: I7ebe7eda49024b40a69a24857322c5ca9c67babb
Reviewed-on: https://go-review.googlesource.com/94175
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This avoid simple bugs like "ADD" matching "FADD". Obviously
"ADD" will still match "ADDQ" so some care is still required
in this regard, but at least a first class of possible errors
is taken care of.
Change-Id: I7deb04c31de30bedac9c026d9889ace4a1d2adcb
Reviewed-on: https://go-review.googlesource.com/97817
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
asmcheck comments now support a compact form of specifying
multiple checks for each platform, using the following syntax:
amd64:"SHL\t[$]4","SHR\t[$]4"
Negative checks are also parsed using the following syntax:
amd64:-"ROR"
though they are still not working.
Moreover, out-of-line comments have been implemented. This
allows to specify asmchecks on comment-only lines, that will
be matched on the first subsequent non-comment non-empty line.
// amd64:"XOR"
// arm:"EOR"
x ^= 1
Change-Id: I110c7462fc6a5c70fd4af0d42f516016ae7f2760
Reviewed-on: https://go-review.googlesource.com/97816
Reviewed-by: Keith Randall <khr@golang.org>
When the slice/string length is very large,
probably artifically large as in CL 97523,
adding BX (length) to R11 (pointer) overflows.
As a result, checking DI < R11 yields the wrong result.
Since they will be equal when the loop is done,
just check DI != R11 instead.
Yes, the pointer itself could overflow, but if that happens,
something else has gone pretty wrong; not our concern here.
Fixes#24187
Change-Id: I2f60fc6ccae739345d01bc80528560726ad4f8c6
Reviewed-on: https://go-review.googlesource.com/97802
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The top-level test harness is modified to support a new kind
of test: "asmcheck". This is meant to replace asm_test.go
as an easier and more readable way to test code generation.
I've added a couple of codegen tests to get initial feedback
on the syntax. I've created them under a common "codegen"
subdirectory, so that it's easier to run them all with
"go run run.go -v codegen".
The asmcheck syntax allows to insert line comments that
can specify a regular expression to match in the assembly code,
for multiple architectures (the testsuite will automatically
build each testfile multiple times, one per mentioned architecture).
Negative matches are unsupported for now, so this cannot fully
replace asm_test yet.
Change-Id: Ifdbba389f01d55e63e73c99e5f5449e642101d55
Reviewed-on: https://go-review.googlesource.com/97355
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
OCOMPLIT stores the pre-typechecked type in n.Right, and then moves it
to n.Type. However, it wasn't clearing n.Right, so n.Right continued
to point to the OTYPE node. (Exception: slice literals reused n.Right
to store the array length.)
When exporting inline function bodies, we don't expect to need to save
any type aliases. Doing so wouldn't be wrong per se, but it's
completely unnecessary and would just bloat the export data.
However, reexportdep (whose role is to identify types needed by inline
function bodies) uses a generic tree traversal mechanism, which visits
n.Right even for O{ARRAY,MAP,STRUCT}LIT nodes. This means it finds the
OTYPE node, and mistakenly interpreted that the type alias needs to be
exported.
The straight forward fix is to just clear n.Right when typechecking
composite literals.
Fixes#24173.
Change-Id: Ia2d556bfdd806c83695b08e18b6cd71eff0772fc
Reviewed-on: https://go-review.googlesource.com/97719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Otherwise, the error can be confusing if one forgets or doesn't know
that the builtin is being shadowed, which is not common practice.
Fixes#22822.
Change-Id: I735393b5ce28cb83815a1c3f7cd2e7bb5080a32d
Reviewed-on: https://go-review.googlesource.com/97455
Reviewed-by: Robert Griesemer <gri@golang.org>
This change enables printing of relative column information if a
prior line directive specified a valid column. If there was no
line directive, or the line directive didn't specify a column
(or the -C flag is specified), no column information is shown in
file positions.
Implementation: Column values (and line values, for that matter)
that are zero are interpreted as "unknown". A line directive that
doesn't specify a column records that as a zero column in the
respective PosBase data structure. When computing relative columns,
a relative value is zero of the base's column value is zero.
When formatting a position, a zero column value is not printed.
To make this work without special cases, the PosBase for a file
is given a concrete (non-0:0) position 1:1 with the PosBase's
line and column also being 1:1. In other words, at the position
1:1 of a file, it's relative positions are starting with 1:1 as
one would expect.
In the package syntax, this requires self-recursive PosBases for
file bases, matching what cmd/internal/src.PosBase was already
doing. In src.PosBase, file and inlining bases also need to be
based at 1:1 to indicate "known" positions.
This change completes the cmd/compiler part of the issue below.
Fixes#22662.
Change-Id: I6c3d2dee26709581fba0d0261b1d12e93f1cba1a
Reviewed-on: https://go-review.googlesource.com/97375
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The first word of an interface is a pointer, but for the purposes
of GC we don't need to treat it as such.
1. If it is a non-empty interface, the pointer points to an itab
which is always in persistentalloc space.
2. If it is an empty interface, the pointer points to a _type.
a. If it is a compile-time-allocated type, it points into
the read-only data section.
b. If it is a reflect-allocated type, it points into the Go heap.
Reflect is responsible for keeping a reference to
the underlying type so it won't be GCd.
If we ever have a moving GC, we need to change this for 2b (as
well as scan itabs to update their itab._type fields).
Write barriers on the first word of interfaces have already been removed.
Change-Id: I643e91d7ac4de980ac2717436eff94097c65d959
Reviewed-on: https://go-review.googlesource.com/97518
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
