We want to issue loads as soon as possible, especially when they
are going to miss in the cache. Using a conditional move (CMOV) here:
i := ...
if cond {
i++
}
... = a[i]
means that we have to wait for cond to be computed before the load
is issued. Without a CMOV, if the branch is predicted correctly the
load can be issued in parallel with computing cond.
Even if the branch is predicted incorrectly, maybe the speculative
load is close to the real load, and we get a prefetch for free.
In the worst case, when the prediction is wrong and the address is
way off, we only lose by the time difference between the CMOV
latency (~2 cycles) and the mispredict restart latency (~15 cycles).
We only squash CMOVs that affect load addresses. Results of CMOVs
that are used for other things (store addresses, store values) we
use as before.
Fixes#26306
Change-Id: I82ca14b664bf05e1d45e58de8c4d9c775a127ca1
Reviewed-on: https://go-review.googlesource.com/c/145717
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This commit fixes a mistake made in CL 144538.
This nilcheck can be removed because OpPPC64LoweredMove will fault if
arg0 is nil, as it's used to store. Further information can be found in
cmd/compile/internal/ssa/nilcheck.go.
Change-Id: Ifec0080c00eb1f94a8c02f8bf60b93308e71b119
Reviewed-on: https://go-review.googlesource.com/c/151298
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Note that the intrinsic implementation panics separately for overflow and
divide by zero, which matches the behavior of the pure go implementation.
There is a modest performance improvement after intrinsic implementation.
name old time/op new time/op delta
Div-4 53.0ns ± 1% 47.0ns ± 0% -11.28% (p=0.008 n=5+5)
Div32-4 18.4ns ± 0% 18.5ns ± 1% ~ (p=0.444 n=5+5)
Div64-4 53.3ns ± 0% 47.5ns ± 4% -10.77% (p=0.008 n=5+5)
Updates #28273
Change-Id: Ic1688ecc0964acace2e91bf44ef16f5fb6b6bc82
Reviewed-on: https://go-review.googlesource.com/c/144378
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Don't convert values that aren't Go constants, like
uintptr(unsafe.Pointer(nil)), to a literal constant. This avoids
assuming they are constants for things like indexing, array sizes,
case duplication, etc.
Also, nil is an allowed duplicate in switches. CTNILs aren't Go constants.
Fixes#28078Fixes#28079
Change-Id: I9ab8af47098651ea09ef10481787eae2ae2fb445
Reviewed-on: https://go-review.googlesource.com/c/151320
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When a slice composite literal is sparse, initialize it dynamically
instead of statically.
s := []int{5:5, 20:20}
To initialize the backing store for s, use 2 constant writes instead
of copying from a static array with 21 entries.
This CL also fixes pathologies in the compiler when the slice is
*very* sparse.
Fixes#23780
Change-Id: Iae95c6e6f6a0e2994675cbc750d7a4dd6436b13b
Reviewed-on: https://go-review.googlesource.com/c/151319
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Abort evconst if its argument isn't a Go constant. The SSA backend
will do the optimizations in question later. They tend to be weird
cases, like uintptr(unsafe.Pointer(uintptr(1))).
Fix OADDSTR and OCOMPLEX cases in isGoConst.
OADDSTR has its arguments in n.List, not n.Left and n.Right.
OCOMPLEX might have a 2-result function as its arg in List[0]
(in which case it isn't a Go constant).
Fixes#24760
Change-Id: Iab312d994240d99b3f69bfb33a443607e872b01d
Reviewed-on: https://go-review.googlesource.com/c/151338
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In assembly free packages (aka "complete" or "pure go"), allow
bodyless functions if they are linkname'd to something else.
Presumably the thing the function is linkname'd to has a definition.
If not, the linker will complain. And linkname is unsafe, so we expect
users to know what they are doing.
Note this handles only one direction, where the linkname directive
is in the local package. If the linkname directive is in the remote
package, this CL won't help. (See os/signal/sig.s for an example.)
Fixes#23311
Change-Id: I824361b4b582ee05976d94812e5b0e8b0f7a18a6
Reviewed-on: https://go-review.googlesource.com/c/151318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This commit adapts compile tool to create correct nilchecks for AIX.
AIX allows to load a nil pointer. Therefore, the default nilcheck
which issues a load must be replaced by a CMP instruction followed by a
store at 0x0 if the value is nil. The store will trigger a SIGSEGV as on
others OS.
The nilcheck algorithm must be adapted to do not remove nilcheck if it's
only a read. Stores are detected with v.Type.IsMemory().
Tests related to nilptr must be adapted to the previous changements.
nilptr.go cannot be used as it's because the AIX address space starts at
1<<32.
Change-Id: I9f5aaf0b7e185d736a9b119c0ed2fe4e5bd1e7af
Reviewed-on: https://go-review.googlesource.com/c/144538
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This commit allows the runtime to handle 64bits addresses returned by
mmap syscall on AIX.
Mmap syscall returns addresses on 59bits on AIX. But the Arena
implementation only allows addresses with less than 48 bits.
This commit increases the arena size up to 1<<60 for aix/ppc64.
Update: #25893
Change-Id: Iea72e8a944d10d4f00be915785e33ae82dd6329e
Reviewed-on: https://go-review.googlesource.com/c/138736
Reviewed-by: Austin Clements <austin@google.com>
Currently, both asm and compile have a -symabis flag, but in asm it's
a boolean flag that means to generate a symbol ABIs file and in the
compiler its a string flag giving the path of the symbol ABIs file to
consume. I'm worried about this false symmetry biting us in the
future, so rename asm's flag to -gensymabis.
Updates #27539.
Change-Id: I8b9c18a852d2838099718f8989813f19d82e7434
Reviewed-on: https://go-review.googlesource.com/c/149818
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The current support_XXX variables are specific for the
amd64 and 386 platforms.
Prefix processor capability variables by architecture to have a
consistent naming scheme and avoid reuse of the existing
variables for new platforms.
This also aligns naming of runtime variables closer with internal/cpu
processor capability variable names.
Change-Id: I3eabb29a03874678851376185d3a62e73c1aff1d
Reviewed-on: https://go-review.googlesource.com/c/91435
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When using soft-float, OMUL might be rewritten to function call
so we should ensure it was evaluated first.
Fixes#28688
Change-Id: I30b87501782fff62d35151f394a1c22b0d490c6c
Reviewed-on: https://go-review.googlesource.com/c/148837
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Move the empty header file created by "builddir", "buildrundir"
directives to t.tempDir. The file was accidentally placed in the
same directory as the source code and this was a vestige of CL 146999.
Fixes#28781
Change-Id: I3d2ada5f9e8bf4ce4f015b9bd379b311592fe3ce
Reviewed-on: https://go-review.googlesource.com/c/149458
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Because run.go doesn't pass the package being compiled to the compiler
via the -p flag, it can't match up the main·f symbol from the
assembler with the "func f" stub in Go, so it doesn't produce the
correct assembly stub.
Fix this by removing the package prefix from the assembly definition.
Alternatively, we could make run.go pass -p to the compiler, but it's
nicer to remove these package prefixes anyway.
Should fix the linux-arm builder, which was broken by the introduction
of function ABIs in CL 147160.
Updates #27539.
Change-Id: Id62b7701e1108a21a5ad48ffdb5dad4356c273a6
Reviewed-on: https://go-review.googlesource.com/c/149483
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
When we set an explicit argmap, we may want only a prefix of that
argmap. Argmap is set when the function is reflect.makeFuncStub or
reflect.methodValueCall. In this case, arglen specifies how much of
the args section is actually live. (It could be either all the args +
results, or just the args.)
Fixes#28750
Change-Id: Idf060607f15a298ac591016994e58e22f7f92d83
Reviewed-on: https://go-review.googlesource.com/c/149217
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This is a little clearer, and we're about to need the .s file list in
one more place, so this will cut down on duplication.
Change-Id: I4da8bf03a0469fb97565b0841c40d505657b574e
Reviewed-on: https://go-review.googlesource.com/c/146998
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We have an existing optimization that recognizes
memory moves of the form A -> B -> C and converts
them into A -> C, in the hopes that the store to
B will be end up being dead and thus eliminated.
However, when A, B, and C are large types,
the front end sometimes emits VarDef ops for the moves.
This change adds an optimization to match that pattern.
This required changing an old compiler test.
The test assumed that a temporary was required
to deal with a large return value.
With this optimization in place, that temporary
ended up being eliminated.
Triggers 649 times during 'go build -a std cmd'.
Cuts 16k off cmd/go.
name old object-bytes new object-bytes delta
Template 507kB ± 0% 507kB ± 0% -0.15% (p=0.008 n=5+5)
Unicode 225kB ± 0% 225kB ± 0% ~ (all equal)
GoTypes 1.85MB ± 0% 1.85MB ± 0% ~ (all equal)
Flate 328kB ± 0% 328kB ± 0% ~ (all equal)
GoParser 402kB ± 0% 402kB ± 0% -0.00% (p=0.008 n=5+5)
Reflect 1.41MB ± 0% 1.41MB ± 0% -0.20% (p=0.008 n=5+5)
Tar 458kB ± 0% 458kB ± 0% ~ (all equal)
XML 601kB ± 0% 599kB ± 0% -0.21% (p=0.008 n=5+5)
Change-Id: I9b5f25c8663a0b772ad1ee51fa61f74b74d26dd3
Reviewed-on: https://go-review.googlesource.com/c/143479
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
This change makes use of the cc versions of the AND, OR, XOR
instructions, omitting the need for a CMP instruction.
In many test programs and in the go binary, this reduces the
size of 20-30 functions by at least 1 instruction, many in
runtime.
Testcase added to test/codegen/comparisons.go
Change-Id: I6cc1ca8b80b065d7390749c625bc9784b0039adb
Reviewed-on: https://go-review.googlesource.com/c/143059
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a simple tweak to allow a bit more mid-stack inlining.
In cases like this:
func f() {
g()
}
We'd really like to inline f into its callers. It can't hurt.
We implement this optimization by making calls a bit cheaper, enough
to afford a single call in the function body, but not 2.
The remaining budget allows for some argument modification, or perhaps
a wrapping conditional:
func f(x int) {
g(x, 0)
}
func f(x int) {
if x > 0 {
g()
}
}
Update #19348
Change-Id: Ifb1ea0dd1db216c3fd5c453c31c3355561fe406f
Reviewed-on: https://go-review.googlesource.com/c/147361
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Dead-code eliminating labels is tricky because there might
be gotos that can still reach them.
Bug probably introduced with CL 91056
Fixes#28616
Change-Id: I6680465134e3486dcb658896f5172606cc51b104
Reviewed-on: https://go-review.googlesource.com/c/147817
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Iskander Sharipov <iskander.sharipov@intel.com>
This change re-introduces (temporarily) a work-around for recursive
alias type declarations, originally in https://golang.org/cl/35831/
(intended as fix for #18640). The work-around was removed later
for a more comprehensive cycle detection check. That check
contained a subtle error which made the code appear to work,
while in fact creating incorrect types internally. See #25838
for details.
By re-introducing the original work-around, we eliminate problems
with many simple recursive type declarations involving aliases;
specifically cases such as #27232 and #27267. However, the more
general problem remains.
This CL also fixes the subtle error (incorrect variable use when
analyzing a type cycle) mentioned above and now issues a fatal
error with a reference to the relevant issue (rather than crashing
later during the compilation). While not great, this is better
than the current status. The long-term solution will need to
address these cycles (see #25838).
As a consequence, several old test cases are not accepted anymore
by the compiler since they happened to work accidentally only.
This CL disables parts or all code of those test cases. The issues
are: #18640, #23823, and #24939.
One of the new test cases (fixedbugs/issue27232.go) exposed a
go/types issue. The test case is excluded from the go/types test
suite and an issue was filed (#28576).
Updates #18640.
Updates #23823.
Updates #24939.
Updates #25838.
Updates #28576.
Fixes#27232.
Fixes#27267.
Change-Id: I6c2d10da98bfc6f4f445c755fcaab17fc7b214c5
Reviewed-on: https://go-review.googlesource.com/c/147286
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Unlikely to happen in practice, but easy enough to prevent and might
as well do so for completeness.
Fixes#28243.
Change-Id: I848c3af49cb923f088e9490c6a79373e182fad08
Reviewed-on: https://go-review.googlesource.com/c/142719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Austin Clements <austin@google.com>
This commit skips tests which aren't yet supported on AIX.
nosplit.go is disabled because stackGuardMultiplier is increased for
syscalls.
Change-Id: Ib5ff9a4539c7646bcb6caee159f105ff8a160ad7
Reviewed-on: https://go-review.googlesource.com/c/146939
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
For moves >8,<16 bytes, do a move using non-overlapping loads/stores
if it would require no more instructions.
This helps a bit with the case when the move is from a static
constant, because then the code to materialize the value being moved
is smaller.
Change-Id: Ie47a5a7c654afeb4973142b0a9922faea13c9b54
Reviewed-on: https://go-review.googlesource.com/c/146019
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL fixes several typos and adds two more cases
to arithmetic test.
Change-Id: I086560162ea351e2166866e444e2317da36c1729
Reviewed-on: https://go-review.googlesource.com/c/145210
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts commit 9ce87a63b9.
The fix addresses the specific test case, but not the general
problem.
Updates #24755.
Change-Id: I0ba8463b41b099b1ebf49759f88a423b40f70d58
Reviewed-on: https://go-review.googlesource.com/c/145617
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This way, once the constant declarations are typechecked, all named
types are fully typechecked and have all of their methods added.
Usually this isn't important, as methods and interfaces cannot be used
in constant declarations. However, it can lead to confusing and
incorrect errors, such as:
$ cat f.go
package p
type I interface{ F() }
type T struct{}
const _ = I(T{})
func (T) F() {}
$ go build f.go
./f.go:6:12: cannot convert T literal (type T) to type I:
T does not implement I (missing F method)
The error is clearly wrong, as T does have an F method. If we ensure
that all funcs are typechecked before all constant declarations, we get
the correct error:
$ go build f2.go
# command-line-arguments
./f.go:6:7: const initializer I(T literal) is not a constant
Fixes#24755.
Change-Id: I182b60397b9cac521d9a9ffadb11b42fd42e42fe
Reviewed-on: https://go-review.googlesource.com/c/115096
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 114797 reworked how arguments get written to the stack.
Some type conversions got lost in the process. Restore them.
Fixes#28390
Updates #28430
Change-Id: Ia0d37428d7d615c865500bbd1a7a4167554ee34f
Reviewed-on: https://go-review.googlesource.com/c/144598
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unlike normal load+op opcodes, the load+compare opcode does
not clobber its non-load argument. Allow the load+compare merge
to happen even if the non-load argument is used elsewhere.
Noticed when investigating issue #28417.
Change-Id: Ibc48d1f2e06ae76034c59f453815d263e8ec7288
Reviewed-on: https://go-review.googlesource.com/c/145097
Reviewed-by: Ainar Garipov <gugl.zadolbal@gmail.com>
Reviewed-by: Ben Shi <powerman1st@163.com>
If a field and method have the same name, mark the respective struct field
so that we don't report follow-on errors when the field/method is accessed.
Per suggestion of @mdempsky.
Fixes#28268.
Change-Id: Ia1ca4cdfe9bacd3739d1fd7ca5e014ca094245ee
Reviewed-on: https://go-review.googlesource.com/c/144259
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
prove is able to find 94 occurrences in std cmd where a divisor
can't have the value -1. The change removes
the extraneous fix-up code for these cases.
Fixes#25239
Change-Id: Ic184de971f47cc57c702eb72805b8e291c14035d
Reviewed-on: https://go-review.googlesource.com/c/130215
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The second and subsequent return values from f() need to be
converted to the element type of the first return value from f()
(which must be a slice).
Fixes#22327
Change-Id: I5c0a424812c82c1b95b6d124c5626cfc4408bdb6
Reviewed-on: https://go-review.googlesource.com/c/142718
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL add 3 rules to combine byte-store to word-store on386 and
amd64.
Change-Id: Iffd9cda42f1961680c81def4edc773ad58f211b3
Reviewed-on: https://go-review.googlesource.com/c/143057
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
As of https://golang.org/cl/43456 gccgo now gives a better error
message for this test.
Before:
fixedbugs/issue5089.go:13:1: error: redefinition of ‘bufio.Buffered’: receiver name changed
func (b *bufio.Reader) Buffered() int { // ERROR "non-local|redefinition"
^
fixedbugs/issue5089.go:11:13: note: previous definition of ‘bufio.Buffered’ was here
import "bufio" // GCCGO_ERROR "previous"
^
Now:
fixedbugs/issue5089.go:13:7: error: may not define methods on non-local type
func (b *bufio.Reader) Buffered() int { // ERROR "non-local|redefinition"
^
Change-Id: I4112ca8d91336f6369f780c1d45b8915b5e8e235
Reviewed-on: https://go-review.googlesource.com/c/130955
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Building with gccgo failed with an undefined symbol error from an
unnecessary hash function.
Updates #19773
Change-Id: Ic78bf1b086ff5ee26d464089c0e14987d3fe8b02
Reviewed-on: https://go-review.googlesource.com/c/130956
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL adds more combined load/store test cases for 386/amd64.
Change-Id: I0a483a6ed0212b65c5e84d67ed8c9f50c389ce2d
Reviewed-on: https://go-review.googlesource.com/c/142878
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Nowadays there are better ways to safely run untrusted Go programs, like
NaCl and gVisor.
Change-Id: I20c45f13a50dbcf35c343438b720eb93e7b4e13a
Reviewed-on: https://go-review.googlesource.com/c/142717
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This appears to have simply been an oversight.
Change-Id: Ia5d1309b3ebc99c9abbf0282397693272d8178aa
Reviewed-on: https://go-review.googlesource.com/c/142885
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ensure that label redefinition error column numbers
print the actual start of the label instead of the
position of the label's delimiting token ":".
For example, given this program:
package main
func main() {
foo:
foo:
foo:
foo :
}
* Before:
main.go:5:13: label foo defined and not used
main.go:6:7: label foo already defined at main.go:5:13
main.go:7:4: label foo already defined at main.go:5:13
main.go:8:16: label foo already defined at main.go:5:13
* After:
main.go:5:13: label foo defined and not used
main.go:6:4: label foo already defined at main.go:5:13
main.go:7:1: label foo already defined at main.go:5:13
main.go:8:1: label foo already defined at main.go:5:13
Fixes#26411
Change-Id: I8eb874b97fdc8862547176d57ac2fa0f075f2367
Reviewed-on: https://go-review.googlesource.com/c/124595
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Numbers without decimals are valid Go representations of whole-number
floats. That is, "var x float64 = 5" is valid Go. Avoid breakage in
tests that expect a certain output from %#v by reverting to it.
To guarantee the right type is generated by a print use %T(%#v) instead.
Added a test to lock in this behavior.
This reverts commit 7c7cecc184.
Fixes#27634
Updates #26363
Change-Id: I544c400a0903777dd216452a7e86dfe60b0b0283
Reviewed-on: https://go-review.googlesource.com/c/142597
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
ARMv7's MULAF/MULSF/MULAD/MULSD are not fused,
this CL fixes the confusing test cases.
Change-Id: I35022e207e2f0d24a23a7f6f188e41ba8eee9886
Reviewed-on: https://go-review.googlesource.com/c/142439
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Akhil Indurti <aindurti@gmail.com>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
In golang.org/cl/75310, the compiler's typechecker was changed so that
map key types were validated at a later stage, to make sure that all the
necessary type information was present.
This still worked for map type declarations, but caused a regression for
top-level map variable declarations. These now caused a fatal panic
instead of a typechecking error.
The cause was that checkMapKeys was run too early, before all
typechecking was done. In particular, top-level map variable
declarations are typechecked as external declarations, much later than
where checkMapKeys was run.
Add a test case for both exported and unexported top-level map
declarations, and add a second call to checkMapKeys at the actual end of
typechecking. Simply moving the one call isn't a good solution either;
the comments expand on that.
Fixes#28058.
Change-Id: Ia5febb01a1d877447cf66ba44fb49a7e0f4f18a5
Reviewed-on: https://go-review.googlesource.com/c/140417
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
x = map[string(byteslice)] is already optimized by the compiler to avoid a
string allocation. This CL generalizes this optimization to:
x = map[T1{ ... Tn{..., string(byteslice), ...} ... }]
where T1 to Tn is a nesting of struct and array literals.
Found in a hot code path that used a struct of strings made from []byte
slices to make a map lookup.
There are no uses of the more generalized optimization in the standard library.
Passes toolstash -cmp.
MapStringConversion/32/simple 21.9ns ± 2% 21.9ns ± 3% ~ (p=0.995 n=17+20)
MapStringConversion/32/struct 28.8ns ± 3% 22.0ns ± 2% -23.80% (p=0.000 n=20+20)
MapStringConversion/32/array 28.5ns ± 2% 21.9ns ± 2% -23.14% (p=0.000 n=19+16)
MapStringConversion/64/simple 21.0ns ± 2% 21.1ns ± 3% ~ (p=0.072 n=19+18)
MapStringConversion/64/struct 72.4ns ± 3% 21.3ns ± 2% -70.53% (p=0.000 n=20+20)
MapStringConversion/64/array 72.8ns ± 1% 21.0ns ± 2% -71.13% (p=0.000 n=17+19)
name old allocs/op new allocs/op delta
MapStringConversion/32/simple 0.00 0.00 ~ (all equal)
MapStringConversion/32/struct 0.00 0.00 ~ (all equal)
MapStringConversion/32/array 0.00 0.00 ~ (all equal)
MapStringConversion/64/simple 0.00 0.00 ~ (all equal)
MapStringConversion/64/struct 1.00 ± 0% 0.00 -100.00% (p=0.000 n=20+20)
MapStringConversion/64/array 1.00 ± 0% 0.00 -100.00% (p=0.000 n=20+20)
Change-Id: I483b4d84d8d74b1025b62c954da9a365e79b7a3a
Reviewed-on: https://go-review.googlesource.com/c/116275
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds codegen tests for the intrinsification on ppc64 of
the OnesCount{64,32,16,8}, and TrailingZeros{64,32,16,8} math/bits
functions.
Change-Id: Id3364921fbd18316850e15c8c71330c906187fdb
Reviewed-on: https://go-review.googlesource.com/c/141897
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Ensure that we correctly type the stack temps for regular closures,
method function closures, and slice literals.
Then we don't need to override the dummy types later.
Furthermore, this allows order to reuse temporaries of these types.
OARRAYLIT doesn't need a temporary as far as I can tell, so I
removed that case from order.
Change-Id: Ic58520fa50c90639393ff78f33d3c831d5c4acb9
Reviewed-on: https://go-review.googlesource.com/c/140306
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL adds tests of fused multiplication-accumulation
on arm/arm64.
Change-Id: Ic85d5277c0d6acb7e1e723653372dfaf96824a39
Reviewed-on: https://go-review.googlesource.com/c/141652
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of allocating a new temporary each time one
is needed, keep a list of temporaries which are free
(have already been VARKILLed on every path) and use
one of them.
Should save a lot of stack space. In a function like this:
func main() {
fmt.Printf("%d %d\n", 2, 3)
fmt.Printf("%d %d\n", 4, 5)
fmt.Printf("%d %d\n", 6, 7)
}
The three [2]interface{} arrays used to hold the ... args
all use the same autotmp, instead of 3 different autotmps
as happened previous to this CL.
Change-Id: I2d728e226f81e05ae68ca8247af62014a1b032d3
Reviewed-on: https://go-review.googlesource.com/c/140301
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When we pass these types by reference, we usually have to allocate
temporaries on the stack, initialize them, then pass their address
to the conversion functions. It's simpler to pass these types
directly by value.
This particularly applies to conversions needed for fmt.Printf
(to interface{} for constructing a [...]interface{}).
func f(a, b, c string) {
fmt.Printf("%s %s\n", a, b)
fmt.Printf("%s %s\n", b, c)
}
This function's stack frame shrinks from 200 to 136 bytes, and
its code shrinks from 535 to 453 bytes.
The go binary shrinks 0.3%.
Update #24286
Aside: for this function f, we don't really need to allocate
temporaries for the convT2E function. We could use the address
of a, b, and c directly. That might get similar (or maybe better?)
improvements. I investigated a bit, but it seemed complicated
to do it safely. This change was much easier.
Change-Id: I78cbe51b501fb41e1e324ce4203f0de56a1db82d
Reviewed-on: https://go-review.googlesource.com/c/135377
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Instead of
MOVB go.string."foo"(SB), AX
do
MOVB $102, AX
When we know the global we're loading from is readonly, we can
do that read at compile time.
I've made this arch-dependent mostly because the cases where this
happens often are memory->memory moves, and those don't get
decomposed until lowering.
Did amd64/386/arm/arm64. Other architectures could follow.
Update #26498
Change-Id: I41b1dc831b2cd0a52dac9b97f4f4457888a46389
Reviewed-on: https://go-review.googlesource.com/c/141118
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Do []byte(string) conversions more efficiently when the string
is a constant. Instead of calling stringtobyteslice, allocate
just the space we need and encode the initialization directly.
[]byte("foo") rewrites to the following pseudocode:
var s [3]byte // on heap or stack, depending on whether b escapes
s = *(*[3]byte)(&"foo"[0]) // initialize s from the string
b = s[:]
which generates this assembly:
0x001d 00029 (tmp1.go:9) LEAQ type.[3]uint8(SB), AX
0x0024 00036 (tmp1.go:9) MOVQ AX, (SP)
0x0028 00040 (tmp1.go:9) CALL runtime.newobject(SB)
0x002d 00045 (tmp1.go:9) MOVQ 8(SP), AX
0x0032 00050 (tmp1.go:9) MOVBLZX go.string."foo"+2(SB), CX
0x0039 00057 (tmp1.go:9) MOVWLZX go.string."foo"(SB), DX
0x0040 00064 (tmp1.go:9) MOVW DX, (AX)
0x0043 00067 (tmp1.go:9) MOVB CL, 2(AX)
// Then the slice is b = {AX, 3, 3}
The generated code is still not optimal, as it still does load/store
from read-only memory instead of constant stores. Next CL...
Update #26498Fixes#10170
Change-Id: I4b990b19f9a308f60c8f4f148934acffefe0a5bd
Reviewed-on: https://go-review.googlesource.com/c/140698
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This was missed as part of adding a top-level VARDEF
for stack tracing (CL 134156).
Fixes#28055
Change-Id: Id14748dfccb119197d788867d2ec6a3b3c9835cf
Reviewed-on: https://go-review.googlesource.com/c/140304
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Allocate a long linked list on the stack. This tests both
lots of live stack objects, and lots of intra-stack pointers
to those objects.
Change-Id: I169e067416455737774851633b1e5367e10e1cf2
Reviewed-on: https://go-review.googlesource.com/c/135296
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When a function triggers a signal (like a segfault which translates to
a nil pointer exception) during execution, a sigpanic handler is just
below it on the stack. The function itself did not stop at a
safepoint, so we have to figure out what safepoint we should use to
scan its stack frame.
Previously we used the site of the most recent defer to get the live
variables at the signal site. That answer is not quite correct, as
explained in #27518. Instead, use the site of a deferreturn call.
It has all the right variables marked as live (no args, all the return
values, except those that escape to the heap, in which case the
corresponding PAUTOHEAP variables will be live instead).
This CL requires stack objects, so that all the local variables
and args referenced by the deferred closures keep the right variables alive.
Fixes#27518
Change-Id: Id45d8a8666759986c203181090b962e2981e48ca
Reviewed-on: https://go-review.googlesource.com/c/134637
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The previous CL introduced stack objects. This CL removes the old
ambiguously live liveness analysis. After this CL we're relying
on stack objects exclusively.
Update a bunch of liveness tests to reflect the new world.
Fixes#22350
Change-Id: I739b26e015882231011ce6bc1a7f426049e59f31
Reviewed-on: https://go-review.googlesource.com/c/134156
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In some optimization rules the type of generated OffPtr was
incorrectly set to the type of the pointee, instead of the
pointer. When the OffPtr value is spilled, this may generate
a spill of the wrong type, e.g. a floating point spill of an
integer (pointer) value. On Wasm, this leads to invalid
bytecode.
Fixes#27961.
Change-Id: I5d464847eb900ed90794105c0013a1a7330756cc
Reviewed-on: https://go-review.googlesource.com/c/139257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
During a call to a reflect-generated function or method (via
makeFuncStub or methodValueCall), when should we scan the return
values?
When we're starting a reflect call, the space on the stack for the
return values is not initialized yet, as it contains whatever junk was
on the stack of the caller at the time. The return space must not be
scanned during a GC.
When we're finishing a reflect call, the return values are
initialized, and must be scanned during a GC to make sure that any
pointers in the return values are found and their referents retained.
When the GC stack walk comes across a reflect call in progress on the
stack, it needs to know whether to scan the results or not. It doesn't
know the progress of the reflect call, so it can't decide by
itself. The reflect package needs to tell it.
This CL adds another slot in the frame of makeFuncStub and
methodValueCall so we can put a boolean in there which tells the
runtime whether to scan the results or not.
This CL also adds the args length to reflectMethodValue so the
runtime can restrict its scanning to only the args section (not the
results) if the reflect package says the results aren't ready yet.
Do a delicate dance in the reflect package to set the "results are
valid" bit. We need to make sure we set the bit only after we've
copied the results back to the stack. But we must set the bit before
we drop reflect's copy of the results. Otherwise, we might have a
state where (temporarily) no one has a live copy of the results.
That's the state we were observing in issue #27695 before this CL.
The bitmap used by the runtime currently contains only the args.
(Actually, it contains all the bits, but the size is set so we use
only the args portion.) This is safe for early in a reflect call, but
unsafe late in a reflect call. The test issue27695.go demonstrates
this unsafety. We change the bitmap to always include both args
and results, and decide at runtime which portion to use.
issue27695.go only has a test for method calls. Function calls were ok
because there wasn't a safepoint between when reflect dropped its copy
of the return values and when the caller is resumed. This may change
when we introduce safepoints everywhere.
This truncate-to-only-the-args was part of CL 9888 (in 2015). That
part of the CL fixed the problem demonstrated in issue27695b.go but
introduced the problem demonstrated in issue27695.go.
TODO, in another CL: simplify FuncLayout and its test. stack return
value is now identical to frametype.ptrdata + frametype.gcdata.
Fixes#27695
Change-Id: I2d49b34e34a82c6328b34f02610587a291b25c5f
Reviewed-on: https://go-review.googlesource.com/137440
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Also includes a small tweak to test/run.go to allow package names
with Unicode letters (as opposed to just ASCII chars).
Updates #27836
Change-Id: Idbf0bdea24174808cddcb69974dab820eb13e521
Reviewed-on: https://go-review.googlesource.com/138075
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Show a more specifc error message in the form of "%d variables but %v
returns %d values" if an assignment mismatch occurs with a function
or method call on the right.
Fixes#27595
Change-Id: Ibc97d070662b08f150ac22d686059cf224e012ab
Reviewed-on: https://go-review.googlesource.com/135575
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 136855 removed the encoding/binary dependency from the checkbce.go
test by defining a local Uint64 to fix the noopt builder; then a more
general mechanism to skip tests on the noopt builder was introduced in
CL 136898, so we can now restore the binary.Uint64 calls in testbce.
Change-Id: I3efbb41be0bfc446a7e638ce6a593371ead2684f
Reviewed-on: https://go-review.googlesource.com/137056
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds a new build tag "gcflags_noopt" that can be used in test/*.go
tests.
Fixes#27833
Change-Id: I4ea0ccd9e9e58c4639de18645fec81eb24a3a929
Reviewed-on: https://go-review.googlesource.com/136898
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
&^ and << have equal precedence. Add some parentheses to make sure
we shift before we andnot.
Fixes#27829
Change-Id: Iba8576201f0f7c52bf9795aaa75d15d8f9a76811
Reviewed-on: https://go-review.googlesource.com/136899
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing URL in comment points to an Alioth page which was
deprecated (and not working), so use the new Benchmarks Game URL.
Change-Id: Ifd694382a44a24c44acbed3fe1b17bca6dab998f
Reviewed-on: https://go-review.googlesource.com/136835
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The noopt builder is configured by setting GO_GCFLAGS=-N -l, but the
test/run.go test harness doesn't look at GO_GCFLAGS when processing
"errorcheck" files, it just calls compile:
cmdline := []string{goTool(), "tool", "compile", /* etc */}
This is working as intended, since it makes the tests more robust and
independent from the environment; errorcheck files are supposed to set
additional building flags, when needed, like in:
// errorcheck -0 -N -l
The test/bcecheck.go test used to work on the noopt builder (even if
bce is not active on -N -l) because the test was auto-contained and
the file always compiled with optimizations enabled.
In CL 107355, a new bce test dependent on an external package
(encoding.binary) was added. On the noopt builder the external package
is built using -N -l, and this causes a test failure that broke the
noopt builder:
https://build.golang.org/log/b2be319536285e5807ee9d66d6d0ec4d57433768
To reproduce the failure, one can do:
$ go install -a -gcflags="-N -l" std
$ go run run.go -- checkbce.go
This change fixes the noopt builder breakage by removing the bce test
dependency on encoding/binary by defining a local Uint64() function to
be used in the test.
Change-Id: Ife71aab662001442e715c32a0b7d758349a63ff1
Reviewed-on: https://go-review.googlesource.com/136855
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
See the change and comment in typecheck.go for a detailed explanation.
Fixes#26855.
Change-Id: I7867f948490fc0873b1bd849048cda6acbc36e76
Reviewed-on: https://go-review.googlesource.com/136395
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Teach samesafeexpr to handle arithmetic unary and binary ops.
It makes map lookup optimization possible in
m[k+1] = append(m[k+1], ...)
m[-k] = append(m[-k], ...)
... etc
Does not cover "+" for strings (concatenation).
Change-Id: Ibbb16ac3faf176958da344be1471b06d7cf33a6c
Reviewed-on: https://go-review.googlesource.com/135795
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
That optimization is not valid if x == -0.
The test is a bit tricky because 0 == -0. We distinguish
0 from -0 with 1/0 == inf, 1/-0 == -inf.
This has been a bug since CL 24790 in Go 1.8. Probably doesn't
warrant a backport.
Fixes#27718
Note: the optimization x-0 -> x is actually valid.
But it's probably best to take it out, so as to not confuse readers.
Change-Id: I99f16a93b45f7406ec8053c2dc759a13eba035fa
Reviewed-on: https://go-review.googlesource.com/135701
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of skipping all OSLICEARR, skip only ones with non-pointer
array type. For pointers to arrays, it's safe to apply the
self-assignment slicing optimizations.
Refactored the matching code into separate function for readability.
This is an extension to already existing optimization.
On its own, it does not improve any code under std, but
it opens some new optimization opportunities. One
of them is described in the referenced issue.
Updates #7921
Change-Id: I08ac660d3ef80eb15fd7933fb73cf53ded9333ad
Reviewed-on: https://go-review.googlesource.com/133375
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Makes go binary smaller by 0.2%.
I noticed this in autogenerated equal methods, and there are
probably a lot of those.
Change-Id: I4e04eb3653fbceb9dd6a4eee97ceab1fa4d10b72
Reviewed-on: https://go-review.googlesource.com/135379
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
This adds some improvements to the rules for PPC64 to eliminate
unnecessary zero or sign extends, and fix some rule for truncates
which were not always using the correct sign instruction.
This reduces of size of many functions by 1 or 2 instructions and
can improve performance in cases where the execution time depends
on small loops where at least 1 instruction was removed and where that
loop contributes a significant amount of the total execution time.
Included is a testcase for codegen to verify the sign/zero extend
instructions are omitted.
An example of the improvement (strings):
IndexAnyASCII/256:1-16 392ns ± 0% 369ns ± 0% -5.79% (p=0.000 n=1+10)
IndexAnyASCII/256:2-16 397ns ± 0% 376ns ± 0% -5.23% (p=0.000 n=1+9)
IndexAnyASCII/256:4-16 405ns ± 0% 384ns ± 0% -5.19% (p=1.714 n=1+6)
IndexAnyASCII/256:8-16 427ns ± 0% 403ns ± 0% -5.57% (p=0.000 n=1+10)
IndexAnyASCII/256:16-16 441ns ± 0% 418ns ± 1% -5.33% (p=0.000 n=1+10)
IndexAnyASCII/4096:1-16 5.62µs ± 0% 5.27µs ± 1% -6.31% (p=0.000 n=1+10)
IndexAnyASCII/4096:2-16 5.67µs ± 0% 5.29µs ± 0% -6.67% (p=0.222 n=1+8)
IndexAnyASCII/4096:4-16 5.66µs ± 0% 5.28µs ± 1% -6.66% (p=0.000 n=1+10)
IndexAnyASCII/4096:8-16 5.66µs ± 0% 5.31µs ± 1% -6.10% (p=0.000 n=1+10)
IndexAnyASCII/4096:16-16 5.70µs ± 0% 5.33µs ± 1% -6.43% (p=0.182 n=1+10)
Change-Id: I739a6132b505936d39001aada5a978ff2a5f0500
Reviewed-on: https://go-review.googlesource.com/129875
Reviewed-by: David Chase <drchase@google.com>
math.RoundToEven can be done by one arm64 instruction FRINTND, intrinsify it to improve performance.
The current pure Go implementation of the function Abs is translated into five instructions on arm64:
str, ldr, and, str, ldr. The intrinsic implementation requires only one instruction, so in terms of
performance, intrinsify it is worthwhile.
Benchmarks:
name old time/op new time/op delta
Abs-8 3.50ns ± 0% 1.50ns ± 0% -57.14% (p=0.000 n=10+10)
RoundToEven-8 9.26ns ± 0% 1.50ns ± 0% -83.80% (p=0.000 n=10+10)
Change-Id: I9456b26ab282b544dfac0154fc86f17aed96ac3d
Reviewed-on: https://go-review.googlesource.com/116535
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The CL 132915 added the wrong codegen test for math.Copysign(c, -1),
it should test that AND is not emitted. This CL fixes this error.
Change-Id: Ida1d3d54ebfc7f238abccbc1f70f914e1b5bfd91
Reviewed-on: https://go-review.googlesource.com/134815
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Added some more cases that should be guarded against regression.
Change-Id: I9f1dda2fd0be9b6e167ef1cc018fc8cce55c066c
Reviewed-on: https://go-review.googlesource.com/134017
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add some rules to match the Go code like:
y &= 63
x << y | x >> (64-y)
or
y &= 63
x >> y | x << (64-y)
as a ROR instruction. Make math/bits.RotateLeft faster on arm64.
Extends CL 132435 to arm64.
Benchmarks of math/bits.RotateLeftxxN:
name old time/op new time/op delta
RotateLeft-8 3.548750ns +- 1% 2.003750ns +- 0% -43.54% (p=0.000 n=8+8)
RotateLeft8-8 3.925000ns +- 0% 3.925000ns +- 0% ~ (p=1.000 n=8+8)
RotateLeft16-8 3.925000ns +- 0% 3.927500ns +- 0% ~ (p=0.608 n=8+8)
RotateLeft32-8 3.925000ns +- 0% 2.002500ns +- 0% -48.98% (p=0.000 n=8+8)
RotateLeft64-8 3.536250ns +- 0% 2.003750ns +- 0% -43.34% (p=0.000 n=8+8)
Change-Id: I77622cd7f39b917427e060647321f5513973232c
Reviewed-on: https://go-review.googlesource.com/122542
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
