Open-coded defer slots are assigned indices upfront, so they're
logically like elements in an array. Without reassigning the indices,
we need to keep all of the elements alive so their relative offsets
are correct.
Fixes#61895.
Change-Id: Ie0191fdb33276f4e8ed0becb69086524fff022b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/517856
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 497276 added optimization for len(string([]byte)) by avoiding call to
slicebytetostring. However, the bytes to string expression may contain
init nodes, which need to be preserved. Otherwise, it would make the
liveness analysis confusing about the lifetime of temporary variables
created by init nodes.
Fixes#61778
Change-Id: I6d1280a7d61bcc75f11132af41bda086f084ab54
Reviewed-on: https://go-review.googlesource.com/c/go/+/516375
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Stop using BTSconst and friends when ORLconst can be used instead.
OR can be issued by more function units than BTS can, so it could
lead to better IPC. OR might take a few more bytes to encode, but
not a lot more.
Still use BTSconst for cases where the constant otherwise wouldn't
fit and would require a separate movabs instruction to materialize
the constant. This happens when setting bits 31-63 of 64-bit targets.
Add BTS-to-memory operations so we don't need to load/bts/store.
Fixes#61694
Change-Id: I00379608df8fb0167cb01466e97d11dec7c1596c
Reviewed-on: https://go-review.googlesource.com/c/go/+/515755
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Fixes#61629
This reduce the pressure on regalloc because then the loop only keep alive
one value (the iterator) instead of the iterator and the upper bound since
the comparison now acts against an immediate, often zero which can be skipped.
This optimize things like:
for i := 0; i < n; i++ {
Or a range over a slice where the index is not used:
for _, v := range someSlice {
Or the new range over int from #61405:
for range n {
It is hit in 975 unique places while doing ./make.bash.
Change-Id: I5facff8b267a0b60ea3c1b9a58c4d74cdb38f03f
Reviewed-on: https://go-review.googlesource.com/c/go/+/512935
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Jorropo <jorropo.pgm@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
s==s is always true for strings. This comes up in NaN testing in
generic code, where we want x==x to compile completely away except for
float types.
Fixes#60777
Change-Id: I3ce054b5121354de2f9751b010fb409f148cb637
Reviewed-on: https://go-review.googlesource.com/c/go/+/503795
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
If we load 2 values and then store those 2 loaded values, we can likely
perform that operation with a single wider load and store.
Fixes#60709
Change-Id: Ifc5f92c2f1b174c6ed82a69070f16cec6853c770
Reviewed-on: https://go-review.googlesource.com/c/go/+/502295
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
The compiler/assembler's -S output prints relocation type
numerically, which is hard to understand. Every time I need to
count the relocation type constants to figure out which relocation
it actually is. Print the symbolic name instead.
Change-Id: I4866873bbae8b3dc0ee212609cb00280f9164243
Reviewed-on: https://go-review.googlesource.com/c/go/+/501856
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
(ANDCCconst [y] (MOV.*reg x)) should only be merged when zero
extending. Otherwise, sign bits are lost on negative values.
(ANDCCconst [0xFF] (MOVBreg x)) should be simplified to a zero
extension of x. Likewise for the MOVHreg variant.
Fixes#61297
Change-Id: I04e4fd7dc6a826e870681f37506620d48393698b
Reviewed-on: https://go-review.googlesource.com/c/go/+/508775
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
User code is unlikely to be correct, but don't crash the compiler
when the offset of a pointer in an object is not a multiple of the
pointer size.
Fixes#61187
Change-Id: Ie56bfcb38556c5dd6f702ae4ec1d4534c6acd420
Reviewed-on: https://go-review.googlesource.com/c/go/+/508555
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
According to RISCV manual 11.6:
FMADD x,y,z computes x*y+z and
FNMADD x,y,z => -x*y-z
FMSUB x,y,z => x*y-z
FNMSUB x,y,z => -x*y+z respectively
However our implement of SSA convert FMADD -x,y,z to FNMADD x,y,z which
is wrong and should be convert to FNMSUB according to manual.
Change-Id: Ib297bc83824e121fd7dda171ed56ea9694a4e575
Reviewed-on: https://go-review.googlesource.com/c/go/+/506575
Run-TryBot: M Zhuo <mzh@golangcn.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The large-function phi placement algorithm evidently doesn't like the
same pseudo-variable being used to represent expressions of varying
types.
Instead, use the same tactic as used for "valVar" (ssa.go:6585--6587),
which is to just generate a fresh marker node each time.
Maybe we could just use the OMIN/OMAX nodes themselves as the key
(like we do for OANDAND/OOROR), but that just seems needlessly risky
for negligible memory savings. Using fresh marker values each time
seems obviously safe by comparison.
Fixes#61041.
Change-Id: Ie2600c9c37b599c2e26ae01f5f8a433025d7fd08
Reviewed-on: https://go-review.googlesource.com/c/go/+/506679
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For float or string, min/max builtin performs a runtime call, so we need
to save its result to temporary variable. Otherwise, the runtime call
will clobber closure's arguments currently on the stack when passing
min/max as argument to closures.
Fixes#60990
Change-Id: I1397800f815ec7853182868678d0f760b22afff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/506115
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Our large-function phi placement algorithm is incompatible with phi
opcodes already existing in the SSA representation. Instead, use simple
variable assignments and have the phi placement algorithm place the phis
we need for min/max.
Turns out the small-function phi placement algorithm doesn't have this
sensitivity, so this bug only occurs in large functions (>500 basic blocks).
Maybe we should document/check that no phis are present when we start
phi placement (regardless of size). Leaving for a potential separate CL.
We should probably also fix the placement algorithm to handle existing
phis correctly. But this CL is probably a lot smaller/safer than
messing with phi placement.
Fixes#60982
Change-Id: I59ba7f506c72b22bc1485099a335d96315ebef67
Reviewed-on: https://go-review.googlesource.com/c/go/+/505756
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 410344 fixed missing method value wrapper, by visiting body of
wrapper function after applying inlining pass.
CL 492017 allow more inlining of functions that construct closures,
which ends up making the wrapper function now inlineable, but can
contain closure nodes that couldn't be inlined. These closures body may
contain OMETHVALUE nodes that we never seen, thus we need to scan
closures body for finding them.
Fixes#60945
Change-Id: Ia1e31420bb172ff87d7321d2da2989ef23e6ebb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/505255
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Change-Id: Idd872c5b90dbca564ed8a37bb3683e642142ae63
Reviewed-on: https://go-review.googlesource.com/c/go/+/505015
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Currently ArenaNew expects the type passed in to be a *T and it returns
a *T. This does not match the function's documentation.
Since this is an experiment, change ArenaNew to match the documentation.
This more closely aligns ArenaNew with arena.New. (Takes a type T,
returns a *T value.)
Note that this is a breaking change. However, as far as pkg.go.dev can
tell, there's exactly one package using it in the open source world.
Also, add smoke test for the exported API, which is just a wrapper
around the internal API. Clearly there's enough room for error here that
it should be tested, but we don't need thorough tests at this layer
because that already exists in the runtime. We just need to make sure it
basically works.
Fixes#60528.
Change-Id: I673cc4609378380ef80648b0c2eb2928e73f49c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/501860
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
types2 have already errored about any spec-required overflows, and
division by zero. CL 469595 unintentionally fixed typecheck not to error
about overflows, but zero division is still be checked during tcArith.
This causes unsafe operations with variable size failed to compile,
instead of raising runtime error.
Fixes#60601
Change-Id: I7bea2821099556835c920713397f7c5d8a4025ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/501735
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Don't use the line number of the argument itself, as that may be from
arbitrarily earlier in the function.
Fixes#60673
Change-Id: Ifc0a2aaae221a256be3a4b0b2e04849bae4b79d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/502656
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
CL 496257 adds min/max builtins, which may appear as argument to a
function call, so it will be tested by mayCall. But those ops are not
handled by mayCall, causes the compiler crashes.
Fixes#60582
Change-Id: I729f10bf62b4aad39ffcb1433f576e74d09fdd9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/500575
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
HAUTO should be handled the same way as other stack offsets for
adding to constant pool. Add the missing cases.
Fixes#57955.
Change-Id: If7fc82cafb2bbf0a6121e73e353b8825cb36b5bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/463138
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Some testdir tests fail if GOEXPERIMENT=cgocheck2 is set. Fix this by
skipping these tests.
Change-Id: I58d4ef0cceb86bcf93220b4a44de9b9dc4879b16
Reviewed-on: https://go-review.googlesource.com/c/go/+/499675
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Two interface types that are assignable don't have to be identical;
specifically, if they are defined types, they can be different
defined types. If those defined types specify type parameters which
are never used, do not infer a type argument based on the instantiation
of a matching defined type.
Adjusted three existing tests where we inferred type arguments incorrectly.
Fixes#60377.
Change-Id: I91fb207235424b3cbc42b5fd93eee619e7541cb7
Reviewed-on: https://go-review.googlesource.com/c/go/+/498315
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
sparse conditional constant propagation can discover optimization opportunities that cannot be found by just combining constant folding and constant propagation and dead code elimination separately.
Updates #59399
Change-Id: Ia954e906480654a6f0cc065d75b5912f96f36b2e
GitHub-Last-Rev: 90fc02db99
GitHub-Pull-Request: golang/go#59575
Reviewed-on: https://go-review.googlesource.com/c/go/+/483875
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
CL 415241 and CL 411935 break tests into unified/nounified variants, for
compatibility with old frontend while developing unified IR. Now the old
frontend was gone, so moving those tests back to the original files.
Change-Id: Iecdcd4e6ee33c723f6ac02189b0be26248e15f0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/497275
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In Go 1.17, cmd/compile gained the ability to inline calls to
functions that contain function literals (aka "closures"). This was
implemented by duplicating the function literal body and emitting a
second LSym, because in general it might be optimized better than the
original function literal.
However, the second LSym was named simply as any other function
literal appearing literally in the enclosing function would be named.
E.g., if f has a closure "f.funcX", and f is inlined into g, we would
create "g.funcY" (N.B., X and Y need not be the same.). Users then
have no idea this function originally came from f.
With this CL, the inlined call stack is incorporated into the clone
LSym's name: instead of "g.funcY", it's named "g.f.funcY".
In the future, it seems desirable to arrange for the clone's name to
appear exactly as the original name, so stack traces remain the same
as when -l or -d=inlfuncswithclosures are used. But it's unclear
whether the linker supports that today, or whether any downstream
tooling would be confused by this.
Updates #60324.
Change-Id: Ifad0ccef7e959e72005beeecdfffd872f63982f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/497137
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Retrying the original CL with a small modification. The original CL
did not handle the case of reading an itab out of a dictionary
correctly. When we read an itab out of a dictionary, we must treat
the type inside that itab as maybe being put in an interface.
Original CL: 486895
Revert CL: 490156
Change-Id: Id2dc1699d184cd8c63dac83986a70b60b4e6cbd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/491495
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This enables the implementation for proposal #58671, which is
a likely accept. By enabling it early we get a bit extra soak
time for this feature. The change can be reverted trivially, if
need be.
For #58671.
Change-Id: Id6c27515e45ff79f4f1d2fc1706f3f672ccdd1ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/495955
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the types1 universe, we only need to represent value types. For
interfaces, this means we only need to worry about pure interfaces. A
pure interface can embed a union type, but the overall union must be
equivalent to "any".
In go.dev/cl/458619, we changed the types1 reader to return "any", but
to incorporate a consistency check to make sure this is valid.
Unfortunately, a pure interface can actually still reference impure
interfaces, and in general this is hard to check precisely without
reimplementing a lot of types2 data structures and logic into types1.
We haven't had any other reports of this check failing since 1.20, so
it seems simplest to just suppress for now.
Fixes#60117.
Change-Id: I5053faafe2d1068c6d438b2193347546bf5330cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/495455
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Be more liberal about expanding the OR tree. Handle any tree shape
instead of a fully left or right associative tree.
Also remove tail feature, it isn't ever needed.
Change-Id: If16bebef94b952a604d6069e9be3d9129994cb6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/494056
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ryan Berger <ryanbberger@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
[This is a roll-forward of CL 458755, which was reverted due to make.bash
being broken on GOAMD64=v3. But it turned out that the problem was caused
by wrong bswap/load rewrite rules, and it was fixed in CL 492616.]
This CL enhances the tighten pass. Previously if a value has memory arg,
then the tighten pass won't move it, actually if the memory state is
consistent among definition and use block, we can move the value. This
CL optimizes this case. This is useful for the following situation:
b1:
x = load(...mem)
if(...) goto b2 else b3
b2:
use(x)
b3:
some_op_not_use_x
For the micro-benchmark mentioned in #56620, the performance improvement
is about 15%.
There's no noticeable performance change in the go1 benchmark.
Fixes#56620
Change-Id: I36ea68bed384986cd3ae81cb9e6efe84bb213adc
Reviewed-on: https://go-review.googlesource.com/c/go/+/492895
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
This modifies some existing rules to allow more prefixed instructions
to be generated when using GOPPC64=power10. Some rules also check
if PCRel is available, which is currently supported for linux/ppc64le
and linux/ppc64 (internal linking only).
Prior to p10, DS-offset loads and stores had a 16 bit size limit for
the offset field. If the offset of the data for load or store was
beyond this range then an indexed load or store would be selected by
the rules.
In p10 the assembler can generate prefixed instructions in this case,
but does not if an indexed instruction was selected during the lowering
pass.
This allows many more cases to use prefixed loads or stores, reducing
function sizes and improving performance in some cases where the code
change happens in key loops.
For example in strconv BenchmarkAppendQuoteRune before:
12c5e4: 15 00 10 06 pla r10,1425660
12c5e8: fc c0 40 39
12c5ec: 00 00 6a e8 ld r3,0(r10)
12c5f0: 10 00 aa e8 ld r5,16(r10)
After this change:
12a828: 15 00 10 04 pld r3,1433272
12a82c: b8 de 60 e4
12a830: 15 00 10 04 pld r5,1433280
12a834: c0 de a0 e4
Performs better in the second case.
A testcase was added to verify that the rules correctly select a load or
store based on the offset and whether power10 or earlier.
Change-Id: I4335fed0bd9b8aba8a4f84d69b89f819cc464846
Reviewed-on: https://go-review.googlesource.com/c/go/+/477398
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
With CL 408826 reflect.Value does not always escape. We need to
make sure Value operations does (or does not) escape the Value
correctly. This CL adds a test.
There are still a few unfortunate cases, where some Value
operations escape more than necessary (comparing to a non-reflect
version of the code), but hard to fix. These are mostly that a
Value would escape conditionally (mostly on the type of the Value),
but currently we don't have a good way to express that.
Change-Id: I9fdfc7584670aa09c5a01f6b2803f2043aaddb65
Reviewed-on: https://go-review.googlesource.com/c/go/+/441938
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Types are either static (for compiler-created types) or heap
allocated and always reachable (for reflection-created types, held
in the central map). So there is no need to escape types.
With CL 408826 reflect.Value does not always escape. Some functions
that escapes Value.typ would make the Value escape without this CL.
Had to add a special case for the inliner to keep (*Value).Type
still inlineable.
Change-Id: I7c14d35fd26328347b509a06eb5bd1534d40775f
Reviewed-on: https://go-review.googlesource.com/c/go/+/413474
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The effect and motivation is for the test to be selected when doing
'go test cmd' and not when doing 'go test std' since it's primarily
about testing the Go compiler and linker. Other than that, it's run
by all.bash and 'go test std cmd' as before.
For #56844.
Fixes#60059.
Change-Id: I2d499af013f9d9b8761fdf4573f8d27d80c1fccf
Reviewed-on: https://go-review.googlesource.com/c/go/+/493876
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Russ added test/bench/go1 in CL 5484071 to have a stable suite of
programs to use as benchmarks. For the compiler and runtime we had
back then, those were reasonable benchmarks, but the compiler and
runtime are now far more sophisticated and these benchmarks no longer
have good coverage. We also now have better benchmark suites
maintained outside the repo (e.g., golang.org/x/benchmarks). Keeping
test/bench/go1 at this point is actively misleading.
Indirectly related to #37486, as this also removes the last package
dist test runs outside of src/.
Change-Id: I2867ef303fe48a02acce58ace4ee682add8acdbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/494193
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The test directory driver currently sets the GOOS/GOARCH environment
variables if they aren't set. This appears to be in service of a
single test, test/env.go, which was introduced in September 2008 along
with os.Getenv. It's not entirely clear what that test is even trying
to check, since runtime.GOOS isn't necessarily the same as $GOOS. We
keep the test around because golang.org/x/tools/go/ssa/interp uses it
as a test case, but we simplify the test and eliminate the need for
the driver to set GOOS/GOARCH.
Change-Id: I5acc0093b557c95d1f0a526d031210256a68222d
Reviewed-on: https://go-review.googlesource.com/c/go/+/493601
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Adds rules that rewrites statements such as ~P&~Q as ~(P|Q) and ~P|~Q as ~(P&Q), removing an extraneous instruction.
Change-Id: Icedb97df741680ddf9799df79df78657173aa500
GitHub-Last-Rev: f22e2350c9
GitHub-Pull-Request: golang/go#60018
Reviewed-on: https://go-review.googlesource.com/c/go/+/493175
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Stefan M <st3f4nm4d4@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Thanks to the recent addition of the memcombine pass, the
ppc64 ports now have the memcombine optimizations. Previously
in PPC64.rules, the memcombine rules were only added for
ppc64le targets due to the significant increase in size of
the rewritePPC64.go file when those rules were added. The
ppc64 and ppc64le rules had to be different because of the
byte order due to endianness differences.
This enables the memcombine tests to be run on ppc64 as well
as ppc64le.
Change-Id: I4081e2d94617a1b66541d536c0c2662e266c9c1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/492615
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Lynn Boger <laboger@linux.vnet.ibm.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis, then later fixed
first with an attempt in CL 482355, then again in CL 484859, and then
one more time with CL 492135.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Change-Id: I5f75fcceb177f05853996b75184a486528eafe96
Reviewed-on: https://go-review.googlesource.com/c/go/+/492017
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
If the function referenced by a closure expression is incorporated
into a static init, be sure to mark it as non-hidden, since otherwise
it will be live but no longer reachable from the init func, hence it
will be skipped during escape analysis, which can lead to
miscompilations.
Fixes#59680.
Change-Id: Ib858aee296efcc0b7655d25c23ab8a6a8dbdc5f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/492135
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
[This is a roll-forward of CL 484859, this time including a fix for
issue #59709. The call to do dead function marking was taking place in
the wrong spot, causing it to run more than once if generics were
instantiated.]
This patch generalizes the code in the inliner that marks unreferenced
hidden closure functions as dead. Rather than doing the marking on the
fly (previous approach), this new approach does a single pass at the
end of inlining, which catches more dead functions.
Change-Id: I0e079ad755c21295477201acbd7e1a732a98fffd
Reviewed-on: https://go-review.googlesource.com/c/go/+/492016
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Previously, type arguments could only be inferred for generic
functions in call expressions, whereas with the reverse type inference
proposal they can now be inferred in assignment contexts too. As a
consequence, we now need to check Info.Instances to find the inferred
type for more cases now.
Updates #59338.
Fixes#59955.
Change-Id: I9b6465395869459c2387d0424febe7337b28b90e
Reviewed-on: https://go-review.googlesource.com/c/go/+/492455
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This CL enhances the tighten pass. Previously if a value has memory arg,
then the tighten pass won't move it, actually if the memory state is
consistent among definition and use block, we can move the value. This
CL optimizes this case. This is useful for the following situation:
b1:
x = load(...mem)
if(...) goto b2 else b3
b2:
use(x)
b3:
some_op_not_use_x
For the micro-benchmark mentioned in #56620, the performance improvement
is about 15%.
There's no noticeable performance change in the go1 benchmark.
Fixes#56620
Change-Id: I9b152754f27231f583a6995fc7cd8472aa7d390c
Reviewed-on: https://go-review.googlesource.com/c/go/+/458755
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Put zero-sized data symbols at same address as runtime.zerobase,
so zero-sized global variables have the same address as zero-sized
allocations.
Change-Id: Ib3145dc1b663a9794dfabc0e6abd2384960f2c49
Reviewed-on: https://go-review.googlesource.com/c/go/+/490435
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.
Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.
This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.
before after
stackNosplit 800 800
_StackGuard 928 928
stackNosplit -race 1728 1600
_StackGuard -race 1856 1728
For #59670.
Change-Id: Ia94094c5e47897e7c088d24b4a5e33f5c2768db5
Reviewed-on: https://go-review.googlesource.com/c/go/+/486976
Auto-Submit: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit CL 486380.
Submitted out of order and breaks bootstrap.
Change-Id: I67bd225094b5c9713b97f70feba04d2c99b7da76
Reviewed-on: https://go-review.googlesource.com/c/go/+/486916
Reviewed-by: David Chase <drchase@google.com>
TryBot-Bypass: Austin Clements <austin@google.com>
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.
Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.
This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.
before after
stackNosplit 800 800
_StackGuard 928 928
stackNosplit -race 1728 1600
_StackGuard -race 1856 1728
For #59670.
Change-Id: Ibe20825ebe0076bbd7b0b7501177b16c9dbcb79e
Reviewed-on: https://go-review.googlesource.com/c/go/+/486380
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Marking variables in erroneous variable declarations as used is
convenient for tests but doesn't necessarily hide follow-on errors
in real code: either the variable is not supposed to be declared in
the first place and then we should get an error if it is not used,
or it is there because it is intended to be used, and the we expect
an error it if is not used.
This brings types2 closer to go/types.
Change-Id: If7ee1298fc770f7ad0cefe7e968533fd50ec2343
Reviewed-on: https://go-review.googlesource.com/c/go/+/486175
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add more rules to ensure that order doesn't matter.
Add memequal 0 rule.
Try to use a constant argument to memequal when one is available.
Fixes#59684
Change-Id: I36e85ffbd949396ed700ed6e8ec2bc3ae013f5d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/485535
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit http://go.dev/cl//484859
Reason for revert: causes linker errors in a number of google-internal tests.
Change-Id: I322252f784a46d2b1d447ebcdca86ce14bc0cc91
Reviewed-on: https://go-review.googlesource.com/c/go/+/485755
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis, then later fixed
fist with an attempt in CL 482355, then again in 484859 .]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Updates #56102.
Change-Id: I6e938d596992ffb473cf51e7e598f372ce08deb0
Reviewed-on: https://go-review.googlesource.com/c/go/+/484860
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This patch generalizes the code in the inliner that marks unreferenced
hidden closure functions as dead. Rather than doing the marking on the
fly (previous approach), this new approach does a single pass at the
end of inlining, which catches more dead functions.
Fixes#59638.
Updates #59404.
Updates #59547.
Change-Id: I54fd63e9e37c9123b08a3e7def7d1989919bba91
Reviewed-on: https://go-review.googlesource.com/c/go/+/484859
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 399694 added constant-fold switch early in compilation. So function:
func f() string {
switch intSize {
case 32:
return "32"
case 64:
return "64"
default:
panic("unreachable")
}
}
will be constant-fold to:
func f() string {
switch intSize {
case 64:
return "64"
}
}
When this function get inlined, there is a check whether we can delay
declaring the result parameter until the "return" statement. For the
original function, we can't delay the result, because there's more than
one return statement. However, the constant-fold one can, because
there's on one return statement in the body now. The result parameter
~R0 ends up declaring inside the switch statement scope.
Now, when walking the switch statement, it's re-written into if-else
statement. Without typecheck.EvalConst, the if condition "if 64 == 64"
is passed as-is to the ssa generation pass. Because "64 == 64" is not a
constant, the ssagen creates normal blocks for branching the results.
This confuses the liveness analysis, because ~R0 is only live inside the
if block. With typecheck.EvalConst, "64 == 64" is evaluated to "true",
so ssagen can branch the result without emitting conditional blocks.
Instead, the constant-fold can be re-written as:
switch {
case true:
// Body
}
So it does not depend on the delay results check during inlining. Adding
a test, which will fail when typecheck.EvalConst is removed, so we can
do the cleanup without breaking things.
Change-Id: I638730bb147140de84260653741431b807ff2f15
Reviewed-on: https://go-review.googlesource.com/c/go/+/484316
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Static init inliner is using typecheck.EvalConst to handle string
concatenation expressions. But static init inliner may reveal constant
expressions after substitution, and the compiler needs to evaluate those
expressions in non-constant semantic. Using typecheck.EvalConst, which
always evaluates expressions in constant semantic, is not the right
choice.
For safety, this CL fold the logic to handle string concatenation to
static init inliner, so there won't be regression in handling constant
expressions in non-constant semantic. And also, future CL can simplify
typecheck.EvalConst logic.
Updates #58293
Updates #58339Fixes#58439
Change-Id: I74068d99c245938e576afe9460cbd2b39677bbff
Reviewed-on: https://go-review.googlesource.com/c/go/+/466277
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
(This is a retry of CL 462035 which was reverted at 474976.
The only change from that CL is the aix fix SRODATA->SNOPTRDATA
at inittask.go:141)
As described here:
https://github.com/golang/go/issues/31636#issuecomment-493271830
"Find the lexically earliest package that is not initialized yet,
but has had all its dependencies initialized, initialize that package,
and repeat."
Simplify the runtime a bit, by just computing the ordering required
in the linker and giving a list to the runtime.
Update #31636Fixes#57411
RELNOTE=yes
Change-Id: I28c09451d6aa677d7394c179d23c2c02c503fc56
Reviewed-on: https://go-review.googlesource.com/c/go/+/478916
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit http://go.dev/cl/c/482356.
Reason for revert: Reverting this change again, since it is causing additional failures in google-internal testing.
Change-Id: I9234946f62e5bb18c2f873a65e8b298d04af0809
Reviewed-on: https://go-review.googlesource.com/c/go/+/484735
Reviewed-by: Florian Zenker <floriank@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Auto-Submit: Than McIntosh <thanm@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Range statement will mutate the key and value, so we should treat them as reassigned.
Fixes#59572
Change-Id: I9c6b67d938760a0c6a1d9739f2737c67af4a3a10
Reviewed-on: https://go-review.googlesource.com/c/go/+/483855
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#58141
Co-authored-by: Richard Musiol <neelance@gmail.com>
Co-authored-by: Achille Roussel <achille.roussel@gmail.com>
Co-authored-by: Julien Fabre <ju.pryz@gmail.com>
Co-authored-by: Evan Phoenix <evan@phx.io>
Change-Id: I49b66946acc90fdf09ed9223096bfec9a1e5b923
Reviewed-on: https://go-review.googlesource.com/c/go/+/479627
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Bypass: Ian Lance Taylor <iant@golang.org>
For now, only apply the rule if either of arguments are constants. That
would catch a lot of real user code, without slowing down the compiler
with code generated for string comparison (experience in CL 410336).
Updates #57959Fixes#45928
Change-Id: Ie2e830d6d0d71cda3947818b22c2775bd94f7971
Reviewed-on: https://go-review.googlesource.com/c/go/+/483359
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
So iterators that are in progress can know entries have been deleted and
terminate the iterator properly.
Update #55002
Update #56351Fixes#59411
Change-Id: I924f16a00fe4ed6564f730a677348a6011d3fb67
Reviewed-on: https://go-review.googlesource.com/c/go/+/481935
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Use the type of the store for the byteswap, not the type of the
store's value argument.
Normally when we're storing a 16-bit value, the value being stored is
also typed as 16 bits. But sometimes it is typed as something smaller,
usually because it is the result of an upcast from a smaller value,
and that upcast needs no instructions.
If the type of the store's arg is thinner than the type being stored,
and the byteswap'd value uses that thinner type, and the byteswap'd
value needs to be spilled & restored, that spill/restore happens using
the thinner type, which causes us to lose some of the top bits of the
value.
Fixes#59367
Change-Id: If6ce1e8a76f18bf8e9d79871b6caa438bc3cce4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/481395
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis since fixed in CL 482355.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Updates #56102.
Change-Id: I1f4fc96c71609c8feb59fecdb92b69ba7e3b5b41
Reviewed-on: https://go-review.googlesource.com/c/go/+/482356
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When a closure is inlined, it may contain other hidden closures, which
the inliner will duplicate, rendering the original nested closures as
unreachable. Because they are unreachable, they don't get processed in
escape analysis, meaning that go/defer statements don't get rewritten,
which can then in turn trigger errors in walk. This patch looks for
nested hidden closures and marks them as dead, so that they can be
skipped later on in the compilation flow. NB: if during escape
analysis we rediscover a hidden closure (due to an explicit reference)
that was previously marked dead, revive it at that point.
Fixes#59404.
Change-Id: I76db1e9cf1ee38bd1147aeae823f916dbbbf081b
Reviewed-on: https://go-review.googlesource.com/c/go/+/482355
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Currently, the prove pass can get knowledge from some specific logic
operators only before the CFG is explored, which means that the bounds
information of the branch will be ignored.
This CL updates the facts table by the logic operators in every
branch. Combined with the branch information, this will be helpful for
BCE in some circumstances.
Fixes#57243
Change-Id: I0bd164f1b47804ccfc37879abe9788740b016fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/419555
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Unified IR already records the correct type for them.
Fixes#59378
Change-Id: I275c45b48f67bde55c8e2079d60b5868d0acde7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/481555
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Casting to a *uintptr is not ok if there isn't at least 8 bytes of
data backing that pointer (on 64-bit archs).
So although we end up making a slice of 0 length with that pointer,
the cast itself doesn't know that.
Instead, bail early if the result is going to be 0 length.
Fixes#59334
Change-Id: Id3c0e09d341d838835c0382cccfb0f71dc3dc7e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/480575
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Change-Id: Ie9e38104fed5689a94c368288653fd7cb4b7a35e
Reviewed-on: https://go-review.googlesource.com/c/go/+/479095
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
The cast is proceeded by a bounds check. If the bounds check passes
then we know the pointer in the slice is non-nil.
... except casts to pointers of 0-sized arrays. They are strange, as
the bounds check can pass for a nil input.
Change-Id: Ic01cf4a82d59fbe3071d4b271c94efca9cafaec1
Reviewed-on: https://go-review.googlesource.com/c/go/+/479335
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Change the Checker.use/useLHS functions to report if all "used"
expressions evaluated without error. Use that information to
control whether to report an assignment mismatch error or not.
This will reduce the number of errors reported per assignment,
where the assignment mismatch is only one of the errors.
Change-Id: Ia0fc3203253b002e4e1d5759d8d5644999af6884
Reviewed-on: https://go-review.googlesource.com/c/go/+/478756
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
For #55242
Change-Id: I092b1881623ea997b178d038c0afd10cd5bca937
Reviewed-on: https://go-review.googlesource.com/c/go/+/479898
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
unsafe.SliceData can return pointers which are nil. That function gets
lowered to the SSA OpSlicePtr, which the compiler assumes is non-nil.
This used to be the case as OpSlicePtr was only used in situations
where the bounds check already passed. But with unsafe.SliceData that
is no longer the case.
There are situations where we know it is nil. Use Bounded() to
indicate that.
I looked through all the uses of OSPTR and added SetBounded where it
made sense. Most OSPTR results are passed directly to runtime calls
(e.g. memmove), so even if we know they are non-nil that info isn't
helpful.
Fixes#59293
Change-Id: I437a15330db48e0082acfb1f89caf8c56723fc51
Reviewed-on: https://go-review.googlesource.com/c/go/+/479896
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
As with changes in prior CLs, we don't suppress legitimate
"declared but not used" errors anymore simply because the
respective variables are used in incorrect assignments,
unrelated to the variables in question.
Adjust several (ancient) tests accordingly.
Change-Id: I5826393264d9d8085c64777a330d4efeb735dd2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/478716
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
This CL re-introduces useLHS because we don't want to suppress
correct "declared but not used" errors for variables that only
appear on the LHS of an assignment (using Checker.use would mark
them as used).
This CL also adjusts a couple of places where types2 differed
from go/types (and suppressed valid "declared and not used"
errors). Now those errors are surfaced. Adjusted a handful of
tests accordingly.
Change-Id: Ia555139a05049887aeeec9e5221b1f41432c1a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/478635
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Don't say "array length must be integer" if it is in fact an integer.
Fixes#59209
Change-Id: If60b93a0418f5837ac334412d3838eec25eeb855
Reviewed-on: https://go-review.googlesource.com/c/go/+/479115
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the Sizes API, recognize an overflow (to a negative value) as a
consequence of an oversize value, and specify as such in the API.
Adjust the various size computations to take overflow into account.
Recognize a negative size or offset as an error and report it rather
than panicking.
Use the same protocol for results provided by the default (StdSizes)
and external Sizes implementations.
Add a new error code TypeTooLarge for the new errors.
Fixes#59190.
Fixes#59207.
Change-Id: I8c33a9e69932760275100112dde627289ac7695b
Reviewed-on: https://go-review.googlesource.com/c/go/+/478919
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Under the right conditions we can optimize cmp comparisons to cmn
comparisons, such as:
func foo(a, b int) int {
var c int
if a + b < 0 {
c = 1
}
return c
}
Previously it's compiled as:
ADD R1, R0, R1
CMP $0, R1
CSET LT, R0
With this CL it's compiled as:
CMN R1, R0
CSET MI, R0
Here we need to pay attention to the overflow situation of a+b, the MI
flag means N==1, which doesn't honor the overflow flag V, its value
depends only on the sign of the result. So it has the same semantic of
the Go code, so it's correct.
Similarly, this CL also optimizes the case of >= comparison
using the PL conditional flag.
Change-Id: I47179faba5b30cca84ea69bafa2ad5241bf6dfba
Reviewed-on: https://go-review.googlesource.com/c/go/+/476116
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #59169
Change-Id: Id72ad9fe8b6e1d7cf64f972520ae8858f70c025a
Reviewed-on: https://go-review.googlesource.com/c/go/+/478217
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Add the following common local transformations
(t + x) - (t + y) == x - y
(t + x) - (y + t) == x - y
(x + t) - (y + t) == x - y
(x + t) - (t + y) == x - y
(x - t) + (t + y) == x + y
(x - t) + (y + t) == x + y
The compiler itself matches such patterns many times. This also aligns with other popular compilers.
Fixes#59111
Change-Id: Ibdfdb414782f8fcaa20b84ac5d43d0d9ae2c7b60
GitHub-Last-Rev: 1aad82e62e
GitHub-Pull-Request: golang/go#59119
Reviewed-on: https://go-review.googlesource.com/c/go/+/477555
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
This CL add support for instrinsifying the TrialingZeros{8,32,64}
functions for 386 architecture. We need handle the case when the input
is 0, which could lead to undefined output from the BSFL instruction.
Next CL will remove the assembly code in runtime/internal/sys package.
Change-Id: Ic168edf68e81bf69a536102100fdd3f56f0f4a1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/475735
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This patch changes the relative order of "CanInline" and "InlineCalls"
operations within the inliner for clumps of functions corresponding to
strongly connected components in the call graph. This helps increase
the amount of inlining within SCCs, particularly in Go's runtime
package, which has a couple of very large SCCs.
For a given SCC of the form { fn1, fn2, ... fnk }, the inliner would
(prior to this point) walk through the list of functions and for each
function first compute inlinability ("CanInline") and then perform
inlining ("InlineCalls"). This meant that if there was an inlinable
call from fn3 to fn4 (for example), this call would never be inlined,
since at the point fn3 was visited, we would not have computed
inlinability for fn4.
We now do inlinability analysis for all functions in an SCC first,
then do actual inlining for everything. This results in 47 additional
inlines in the Go runtime package (a fairly modest increase
percentage-wise of 0.6%).
Updates #58905.
Change-Id: I48dbb1ca16f0b12f256d9eeba8cf7f3e6dd853cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/474955
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This reverts commit ce2a609909.
aka CL 462035
Reason for revert: this CL is causing some problems in some internal Google programs.
Change-Id: I4476b8d8d2c3d7b5703d1d85c93baebb4b4e5d26
Reviewed-on: https://go-review.googlesource.com/c/go/+/474976
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This issue has been fixed with unified IR, so just add a test.
Update #53087
Change-Id: I965d9f27529fa6b7c89e2921c65e5a100daeb9fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/410197
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Auto-Submit: Keith Randall <khr@google.com>
On ARM64, in -dynlink mode (building a shared library or a plugin),
accessing global variable is made using the GOT. Currently, the
GOT accessing instruction sequence our assembler generates doesn't
handle large offset well, so we don't fold the offset into loads
and stores in the compiler. Currently, the rewrite rules are
guarded with the -shared flag. However, the GOT access
instructions are only generated in the -dynlink mode (which
implies -shared, but not the other direction).
CL 445535 attempted to remove the guard althgether. But that
causes build failure for -dynlink mode for the reason above. This
CL changes it to guard specifically on -dynlink mode, allowing
the optimization in more cases (-shared but not -dynlink build
modes).
Updates #58826.
Change-Id: I1391db6a33e8d0455a304e7cae7fcfdeb49bfdab
Reviewed-on: https://go-review.googlesource.com/c/go/+/473999
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Adds:
GOEXPERIMENT=loopvar (expected way of invoking)
-d=loopvar={-1,0,1,2,11,12} (for per-package control and/or logging)
-d=loopvarhash=... (for hash debugging)
loopvar=11,12 are for testing, benchmarking, and debugging.
If enabled,for loops of the form `for x,y := range thing`, if x and/or
y are addressed or captured by a closure, are transformed by renaming
x/y to a temporary and prepending an assignment to the body of the
loop x := tmp_x. This changes the loop semantics by making each
iteration's instance of x be distinct from the others (currently they
are all aliased, and when this matters, it is almost always a bug).
3-range with captured iteration variables are also transformed,
though it is a more complex transformation.
"Optimized" to do a simpler transformation for
3-clause for where the increment is empty.
(Prior optimization of address-taking under Return disabled, because
it was incorrect; returns can have loops for children. Restored in
a later CL.)
Includes support for -d=loopvarhash=<binary string> intended for use
with hash search and GOCOMPILEDEBUG=loopvarhash=<binary string>
(use `gossahash -e loopvarhash command-that-fails`).
Minor feature upgrades to hash-triggered features; clients can specify
that file-position hashes use only the most-inline position, and/or that
they use only the basenames of source files (not the full directory path).
Most-inlined is the right choice for debugging loop-iteration change
once the semantics are linked to the package across inlining; basename-only
makes it tractable to write tests (which, otherwise, depend on the full
pathname of the source file and thus vary).
Updates #57969.
Change-Id: I180a51a3f8d4173f6210c861f10de23de8a1b1db
Reviewed-on: https://go-review.googlesource.com/c/go/+/411904
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
As described here:
https://github.com/golang/go/issues/31636#issuecomment-493271830
"Find the lexically earliest package that is not initialized yet,
but has had all its dependencies initialized, initialize that package,
and repeat."
Simplify the runtime a bit, by just computing the ordering required
in the linker and giving a list to the runtime.
Update #31636Fixes#57411
RELNOTE=yes
Change-Id: I1e4d3878ebe6e8953527aedb730824971d722cac
Reviewed-on: https://go-review.googlesource.com/c/go/+/462035
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
A 0-sized no-op shouldn't prevent us from detecting that the first
instruction is from an inlined callee.
Update #58300
Change-Id: Ic5f6ed108c54a32c05e9b2264b516f2cc17e4619
Reviewed-on: https://go-review.googlesource.com/c/go/+/467977
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The assertion here was to make sure the newly constructed and
typechecked expression selected the same receiver-qualified method,
but in the case of anonymous receiver types we can actually end up
with separate types.Field instances corresponding to each types.Type
instance. In that case, the assertion spuriously failed.
The fix here is to relax and assertion and just compare the method's
name and type (including receiver type).
Fixes#58563.
Change-Id: I67d51ddb020e6ed52671473c93fc08f283a40886
Reviewed-on: https://go-review.googlesource.com/c/go/+/471676
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
On Arm64, all 32-bit instructions will ignore the upper 32 bits and
clear them to zero for the result. No need to do an unsign extend before
a 32 bit op.
This CL removes the redundant unsign extension only for the existing
32-bit opcodes, and also omits the sign extension when the upper bit of
the result can be predicted.
Fixes#42162
Change-Id: I61e6670bfb8982572430e67a4fa61134a3ea240a
CustomizedGitHooks: yes
Reviewed-on: https://go-review.googlesource.com/c/go/+/427454
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Eric Fang <eric.fang@arm.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
As motivated on the issue, we want to move the functionality of the
run.go program to happen via a normal go test. Each .go test case in
the GOROOT/test directory gets a subtest, and cmd/go's support for
parallel test execution replaces run.go's own implementation thereof.
The goal of this change is to have fairly minimal and readable diff
while making an atomic changeover. The working directory is modified
during the test execution to be GOROOT/test as it was with run.go,
and most of the test struct and its run method are kept unchanged.
The next CL in the stack applies further simplifications and cleanups
that become viable.
There's no noticeable difference in test execution time: it takes around
60-80 seconds both before and after on my machine. Test caching, which
the previous runner lacked, can shorten the time significantly.
For #37486.
Fixes#56844.
Change-Id: I209619dc9d90e7529624e49c01efeadfbeb5c9ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/463276
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When inlining functions that contain function literals, we need to be
careful about position information. The OCLOSURE node should use the
inline-adjusted position, but the ODCLFUNC and its body should use the
original positions.
However, the same problem can arise with certain generic constructs,
which require the compiler to synthesize function literals to insert
dictionary arguments.
go.dev/cl/425395 fixed the issue with user-written function literals
in a somewhat kludgy way; this CL extends the same solution to
synthetic function literals.
This is all quite subtle and the solutions aren't terribly robust, so
longer term it's probably desirable to revisit how we track inlining
context for positions. But for now, this seems to be the least bad
solution, esp. for backporting to 1.20.
Updates #54625.
Fixes#58513.
Change-Id: Icc43a70dbb11a0e665cbc9e6a64ef274ad8253d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/468415
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Some integer comparisons with 1 and -1 can be rewritten as comparisons
with 0. For example, x < 1 is equivalent to x <= 0. This is an
advantageous transformation on riscv64 because comparisons with zero
do not require a constant to be loaded into a register. Other
architectures will likely benefit too and the transformation is
relatively benign on architectures that do not benefit.
Change-Id: I2ce9821dd7605a660eb71d76e83a61f9bae1bf25
Reviewed-on: https://go-review.googlesource.com/c/go/+/350831
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For go/defer calls like "defer f(x, y)", the compiler rewrites it to:
x1, y1 := x, y
defer func() { f(x1, y1) }()
However, if "f" needs runtime type information, the "RType" field will
refer to the outer ".dict" param, causing wrong liveness analysis.
To fix this, if "f" refers to outer ".dict", the dict param will be
copied to an autotmp, and "f" will refer to this autotmp instead.
Fixes#58341
Change-Id: I238b6e75441442b5540d39bc818205398e80c94d
Reviewed-on: https://go-review.googlesource.com/c/go/+/466035
Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
There are a plenty of regression in 1.20 with this optimization. This CL
disable inline static init, so it's safer to backport to 1.20 branch.
The optimization will be enabled again during 1.21 cycle.
Updates #58293
Updates #58339
For #58293
Change-Id: If5916008597b46146b4dc7108c6b389d53f35e95
Reviewed-on: https://go-review.googlesource.com/c/go/+/467015
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This patch fixes a panic from incorrect interface conversion from
*ir.BasicLit to *ir.ConstExpr. This only occurs when nounified
GOEXPERIMENT is set, so ideally it should be backported to Go
1.20 and removed from master.
Fixes#58339
Change-Id: I357069d7ee1707d5cc6811bd2fbdd7b0456323ae
GitHub-Last-Rev: 641dedb5f9
GitHub-Pull-Request: golang/go#58389
Reviewed-on: https://go-review.googlesource.com/c/go/+/466175
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Since go1.19, these errors are already reported by types2 for any user's
Go code. Compiler generated code, which looks like constant expression
should be evaluated as non-constant semantic, which allows overflows.
Fixes#58293
Change-Id: I6f0049a69bdb0a8d0d7a0db49c7badaa92598ea2
Reviewed-on: https://go-review.googlesource.com/c/go/+/465096
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
This gets eliminated by thoses rules above:
// for rewriting results of some late-expanded rewrites (below)
(SelectN [0] (MakeResult x ___)) => x
(SelectN [1] (MakeResult x y ___)) => y
(SelectN [2] (MakeResult x y z ___)) => z
Fixes#58161
Change-Id: I4fbfd52c72c06b6b3db906bd9910b6dbb7fe8975
Reviewed-on: https://go-review.googlesource.com/c/go/+/463846
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
The BSWAPL instruction is supported in i486 and newer.
https://github.com/golang/go/wiki/MinimumRequirements#386 says we
support "All Pentium MMX or later". The Pentium is also referred to as
i586, so that we are safe with these instructions.
Change-Id: I6dea1f9d864a45bb07c8f8f35a81cfe16cca216c
Reviewed-on: https://go-review.googlesource.com/c/go/+/465515
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Blank node must be ignored when building arguments substitued tree.
Otherwise, it could be used to replace other blank node in left hand
side of an assignment, causing an invalid IR node.
Consider the following code:
type S1 struct {
s2 S2
}
type S2 struct{}
func (S2) Make() S2 {
return S2{}
}
func (S1) Make() S1 {
return S1{s2: S2{}.Make()}
}
var _ = S1{}.Make()
After staticAssignInlinedCall, the assignment becomes:
var _ = S1{s2: S2{}.Make()}
and the arg substitued tree is "map[*ir.Name]ir.Node{_: S1{}}". Now,
when doing static assignment, if there is any assignment to blank node,
for example:
_ := S2{}
That blank node will be replaced with "S1{}":
S1{} := S2{}
So constructing an invalid IR which causes the ICE.
Fixes#58325
Change-Id: I21b48357f669a7e02a7eb4325246aadc31f78fb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/465098
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
CL 458619 fixed the problem un-intentionally, so adding test to prevent
regression happening.
Updates #58345
Change-Id: I80cf60716ef85e142d769e8621fce19c826be03d
Reviewed-on: https://go-review.googlesource.com/c/go/+/465455
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
People are using this to get the name of the function from a function type:
runtime.FuncForPC(reflect.ValueOf(fn).Pointer()).Name()
Unfortunately, this technique falls down when the first instruction
of the function is from an inlined callee. Then the expression above
gets you the name of the inlined function instead of the function itself.
To fix this, ensure that the first instruction is never from an inlinee.
Normally functions have prologs so those are already fine. In just the
cases where a function is a leaf with no local variables, and an instruction
from an inlinee appears first in the prog list, add a nop at the start
of the function to hold a non-inlined position.
Consider the nop a "mini-prolog" for leaf functions.
Fixes#58300
Change-Id: Ie37092f4ac3167fe8e5ef4a2207b14abc1786897
Reviewed-on: https://go-review.googlesource.com/c/go/+/465076
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
This CL adds rules that replaces instances of ISEL that produce
a boolean result based on a condition register by SETBC/SETBCR
operations. On Power10 these are convereted to SETBC/SETBCR
instructions that use one register instead of 3 registers
conventionally used by ISEL and hence reduces register pressure.
On loops written specifically to exercise such instances of ISEL
extensively, a performance improvement of 2.5% is seen on Power10.
Also added verification tests to verify correct generation of
SETBC/SETBCR instructions on Power10.
Change-Id: Ib719897f09d893de40324440a43052dca026e8fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/449795
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change intrinsifies ReverseBytes{16|32|64} by generating the
corresponding new instructions in Power10: brh, brd and brw and
adds a verification test for the same.
On Power 9 and 8, the .go code performs optimally as it is.
Performance improvement seen on Power10:
ReverseBytes32 1.38ns ± 0% 1.18ns ± 0% -14.2
ReverseBytes64 1.52ns ± 0% 1.11ns ± 0% -26.87
ReverseBytes16 1.41ns ± 1% 1.18ns ± 0% -16.47
Change-Id: I88f127f3ab9ba24a772becc21ad90acfba324b37
Reviewed-on: https://go-review.googlesource.com/c/go/+/446675
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
When scheduling a block, deprioritize values whose results aren't used
until subsequent blocks.
For #58166, this has the effect of pushing the induction variable increment
to the end of the block, past all the other uses of the pre-incremented value.
Do this only with optimizations on. Debuggers have a preference for values
in source code order, which this CL can degrade.
Fixes#58166Fixes#57976
Change-Id: I40d5885c661b142443c6d4702294c8abe8026c4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/463751
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
To clear map, and zero content of slice.
Updates #56351
Change-Id: I5f81dfbc465500f5acadaf2c6beb9b5f0d2c4045
Reviewed-on: https://go-review.googlesource.com/c/go/+/453395
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
ir.VisitFuncsBottomUp returns recursive==true for functions which
call themselves. It also returns any closures inside that function.
We don't want to report the closures as recursive, as they really
aren't. Only the containing function is recursive.
Fixes#54159
Change-Id: I3b4d6710a389ec1d6b250ba8a7065f2e985bdbe1
Reviewed-on: https://go-review.googlesource.com/c/go/+/463233
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Manually consolidate the remaining ppc64/ppc64le test which
are not so trivial to automatically merge.
The remaining ppc64le tests are limited to cases where load/stores are
merged (this only happens on ppc64le) and the race detector (only
supported on ppc64le).
Change-Id: I1f9c0f3d3ddbb7fbbd8c81fbbd6537394fba63ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/463217
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Use a small python script to consolidate duplicate
ppc64/ppc64le tests into a single ppc64x codegen test.
This makes small assumption that anytime two tests with
for different arch/variant combos exists, those tests
can be combined into a single ppc64x test.
E.x:
// ppc64le: foo
// ppc64le/power9: foo
into
// ppc64x: foo
or
// ppc64: foo
// ppc64le: foo
into
// ppc64x: foo
import glob
import re
files = glob.glob("codegen/*.go")
for file in files:
with open(file) as f:
text = [l for l in f]
i = 0
while i < len(text):
first = re.match("\s*// ?ppc64(le)?(/power[89])?:(.*)", text[i])
if first:
j = i+1
while j < len(text):
second = re.match("\s*// ?ppc64(le)?(/power[89])?:(.*)", text[j])
if not second:
break
if (not first.group(2) or first.group(2) == second.group(2)) and first.group(3) == second.group(3):
text[i] = re.sub(" ?ppc64(le|x)?"," ppc64x",text[i])
text=text[:j] + (text[j+1:])
else:
j += 1
i+=1
with open(file, 'w') as f:
f.write("".join(text))
Change-Id: Ic6b009b54eacaadc5a23db9c5a3bf7331b595821
Reviewed-on: https://go-review.googlesource.com/c/go/+/463220
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the types1 universe under the unified frontend, we never need to
worry about type parameter constraints, so we only see pure
interfaces. However, we might still see interfaces that contain union
types, because of interfaces like "interface{ any | int }" (equivalent
to just "any").
We can handle these without needing to actually represent type unions
within types1 by simply mapping any union to "any".
Updates #57410.
Change-Id: I5e4efcf0339edbb01f4035c54fb6fb1f9ddc0c65
Reviewed-on: https://go-review.googlesource.com/c/go/+/458619
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL removes the GOEXPERIMENT=nounified knob, and any conditional
statements that depend on that knob. Further CLs to remove unreachable
code follow this one.
Updates #57410.
Change-Id: I39c147e1a83601c73f8316a001705778fee64a91
Reviewed-on: https://go-review.googlesource.com/c/go/+/458615
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
This helps simplify the noise when adding ppc codegen tests. ppc64x
is used in other places to indicate something which runs on either
endian.
This helps cleanup existing codegen tests which are mostly
identical between endian variants.
condmove tests are converted as an example.
Change-Id: I2b2d98a9a1859015f62db38d62d9d5d7593435b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/462895
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Paul Murphy <murp@ibm.com>
This has been investigated and explained on the issue tracker.
Fixes#54402.
Change-Id: I4d8b971faa810591983ad028b7db16411f3b3b4a
Reviewed-on: https://go-review.googlesource.com/c/go/+/461456
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
This reverts commit 3680b5e9c4.
Reason for revert: causes long compile times on certain functions. See issue #57959
Change-Id: Ie9e881ca8abbc79a46de2bfeaed0b9d6c416ed42
Reviewed-on: https://go-review.googlesource.com/c/go/+/463295
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
When -m=N (where N > 1) is in effect, include a note in the trace
output if a given function is considered "big" during inlining
analysis, since this causes the inliner to be less aggressive. If a
small change to a large function happens to nudge it over the large
function threshold, it can be confusing for developers, thus it's
probably worth including this info in the remark output.
Change-Id: Id31a1b76371ab1ef9265ba28a377f97b0247d0a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/460317
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Previously TryBot-tested with bucket bits = 4.
Also tested locally with bucket bits = 5.
This makes it much easier to change the size of map
buckets, and hopefully provides pointers to all the
code that in some way depends on details of map layout.
Change-Id: I9f6669d1eadd02f182d0bc3f959dc5f385fa1683
Reviewed-on: https://go-review.googlesource.com/c/go/+/462115
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Austin Clements <austin@google.com>
If OpArgIntReg is incorrectly scheduled, that causes it to be spilled
incorrectly, which causes the argument to not be considered live
at the start of the function.
This is the test for CL 462858
Add a brief mention of why CL 462858 is needed in the scheduling code.
Change-Id: Id199456f88d9ee5ca46d7b0353a3c2049709880e
Reviewed-on: https://go-review.googlesource.com/c/go/+/462899
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Sort variables before display so that when there are multiple variables
to report, they are in a consistent order.
Otherwise they are ordered in the order they appear in the fn.Dcl list,
which can vary. Particularly, they vary depending on regabi.
Change-Id: I0db380f7cbe6911e87177503a4c3b39851ff1b5a
Reviewed-on: https://go-review.googlesource.com/c/go/+/462898
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
With GOAMD64=V3 the canonical isPowerOfTwo function:
func isPowerOfTwo(x uintptr) bool {
return x&(x-1) == 0
}
Used to compile to:
temp := BLSR(x) // x&(x-1)
flags = TEST(temp, temp)
return flags.zf
However the blsr instruction already set ZF according to the result.
So we can remove the TEST instruction if we are just checking ZF.
Such as in multiple pieces of code around memory allocations.
This make the code smaller and faster.
Change-Id: Ia12d5a73aa3cb49188c0b647b1eff7b56c5a7b58
Reviewed-on: https://go-review.googlesource.com/c/go/+/448255
Run-TryBot: Jakub Ciolek <jakub@ciolek.dev>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
make\(\[\][a-zA-Z0-9]+, 0\) is seen 52 times in the go source.
And at least 391 times on internet:
https://grep.app/search?q=make%5C%28%5C%5B%5C%5D%5Ba-zA-Z0-9%5D%2B%2C%200%5C%29®exp=true
This used to compile to calling runtime.makeslice.
However we can copy what we do for []T{}, just use a zerobase pointer.
On my machine this is 10x faster (from 3ns to 0.3ns).
Note that an empty loop also runs in 0.3ns,
so this really is free when you count superscallar execution.
Change-Id: I1cfe7e69f5a7a4dabbc71912ce6a4f8a2d4a7f3c
Reviewed-on: https://go-review.googlesource.com/c/go/+/454036
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Jakub Ciolek <jakub@ciolek.dev>
Convert the scheduling pass from scheduling backwards to scheduling forwards.
Forward scheduling makes it easier to prioritize scheduling values as
soon as they are ready, which is important for things like nil checks,
select ops, etc.
Forward scheduling is also quite a bit clearer. It was originally
backwards because computing uses is tricky, but I found a way to do it
simply and with n lg n complexity. The new scheme also makes it easy
to add new scheduling edges if needed.
Fixes#42673
Update #56568
Change-Id: Ibbb38c52d191f50ce7a94f8c1cbd3cd9b614ea8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/270940
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The SPanchored opcode is identical to SP, except that it takes a memory
argument so that it (and more importantly, anything that uses it)
must be scheduled at or after that memory argument.
This opcode ensures that a LEAQ of a variable gets scheduled after the
corresponding VARDEF for that variable.
This may lead to less CSE of LEAQ operations. The effect is very small.
The go binary is only 80 bytes bigger after this CL. Usually LEAQs get
folded into load/store operations, so the effect is only for pointerful
types, large enough to need a duffzero, and have their address passed
somewhere. Even then, usually the CSEd LEAQs will be un-CSEd because
the two uses are on different sides of a function call and the LEAQ
ends up being rematerialized at the second use anyway.
Change-Id: Ib893562cd05369b91dd563b48fb83f5250950293
Reviewed-on: https://go-review.googlesource.com/c/go/+/452916
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Martin Möhrmann <martin@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Long ago we decided that panic(nil) was too unlikely to bother
making a special case for purposes of recover. Unfortunately,
it has turned out not to be a special case. There are many examples
of code in the Go ecosystem where an author has written panic(nil)
because they want to panic and don't care about the panic value.
Using panic(nil) in this case has the unfortunate behavior of
making recover behave as though the goroutine isn't panicking.
As a result, code like:
func f() {
defer func() {
if err := recover(); err != nil {
log.Fatalf("panicked! %v", err)
}
}()
call1()
call2()
}
looks like it guarantees that call2 has been run any time f returns,
but that turns out not to be strictly true. If call1 does panic(nil),
then f returns "successfully", having recovered the panic, but
without calling call2.
Instead you have to write something like:
func f() {
done := false
defer func() {
if err := recover(); !done {
log.Fatalf("panicked! %v", err)
}
}()
call1()
call2()
done = true
}
which defeats nearly the whole point of recover. No one does this,
with the result that almost all uses of recover are subtly broken.
One specific broken use along these lines is in net/http, which
recovers from panics in handlers and sends back an HTTP error.
Users discovered in the early days of Go that panic(nil) was a
convenient way to jump out of a handler up to the serving loop
without sending back an HTTP error. This was a bug, not a feature.
Go 1.8 added panic(http.ErrAbortHandler) as a better way to access the feature.
Any lingering code that uses panic(nil) to abort an HTTP handler
without a failure message should be changed to use http.ErrAbortHandler.
Programs that need the old, unintended behavior from net/http
or other packages can set GODEBUG=panicnil=1 to stop the run-time error.
Uses of recover that want to detect panic(nil) in new programs
can check for recover returning a value of type *runtime.PanicNilError.
Because the new GODEBUG is used inside the runtime, we can't
import internal/godebug, so there is some new machinery to
cross-connect those in this CL, to allow a mutable GODEBUG setting.
That won't be necessary if we add any other mutable GODEBUG settings
in the future. The CL also corrects the handling of defaulted GODEBUG
values in the runtime, for #56986.
Fixes#25448.
Change-Id: I2b39c7e83e4f7aa308777dabf2edae54773e03f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/461956
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Russ Cox <rsc@golang.org>
Unified IR added several new IR fields for holding *runtime._type
expressions. To avoid throwing off any frontend semantics
(particularly inlining cost heuristics), they were marked as
`mknode:"-"` so that code wouldn't visit them.
Unfortunately, this has a bad interaction with the static init
inlining optimization, because the latter relies on ir.EditChildren to
substitute all parameters. This potentially includes dictionary
parameters, which can appear within the new RType fields.
This CL adds a new ir.EditChildrenWithHidden function that also edits
these fields, and switches staticinit to use it. Longer term, we
should unhide the RType fields so that ir.EditChildren visits them
normally, but that's scarier so late in the release cycle.
Fixes#57778.
Change-Id: I98c1e8cf366156dc0c81a0cb79029cc5e59c476f
Reviewed-on: https://go-review.googlesource.com/c/go/+/461686
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
We need to avoid nospill registers at this point in regalloc.
Make sure that we don't restrict our register set to avoid registers
desired by other instructions, if the resulting set includes only
nospill registers.
Fixes#57846
Change-Id: I05478e4513c484755dc2e8621d73dac868e45a27
Reviewed-on: https://go-review.googlesource.com/c/go/+/461685
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
As we have seen many times, the type checker must be careful to avoid
accessing named type information before the type is fully set up. We
need a more systematic solution to this problem, but for now avoid one
case that causes a crash: checking a selector expression on an
incomplete type when a type expression is expected.
For golang/go#57522
Change-Id: I7ed31b859cca263276e3a0647d1f1b49670023a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/461577
Run-TryBot: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
These typos were found by executing grep, aspell, sort, and uniq in
a pipe and searching the resulting list manually for possible typos.
grep -r --include '*.go' -E '^// .*$' . | aspell list | sort | uniq
Change-Id: I56281eda3b178968fbf104de1f71316c1feac64f
GitHub-Last-Rev: e91c7cee34
GitHub-Pull-Request: golang/go#57669
Reviewed-on: https://go-review.googlesource.com/c/go/+/460767
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Per the latest spec, we distinguish between interface implementation
and constraint satisfaction. Use the verb "satisfy" when reporting
an error about failing constraint satisfaction.
This CL only changes error messages. It has no impact on correct code.
Fixes#57564.
Change-Id: I6dfb3b2093c2e04fe5566628315fb5f6bd709f17
Reviewed-on: https://go-review.googlesource.com/c/go/+/460396
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Devirtualization can turn OCALLINTER into OCALLMETH, but then we want
to actually desugar into OCALLFUNC instead for later phases. Just
needs a missing call to typecheck.FixMethodCall.
Fixes#57309.
Change-Id: I331fbd40804e1a370134ef17fa6dd501c0920ed3
Reviewed-on: https://go-review.googlesource.com/c/go/+/457715
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
ARM64 maintains booleans in the low byte of registers. Upper parts
of that register are junk.
This rule is using all 32 bits of a boolean-containing register, which
is wrong. Change the rule to only look at the low bit.
Fixes#57184
Change-Id: Ibbef86b2be859df3d06d993db00e1231c481c428
Reviewed-on: https://go-review.googlesource.com/c/go/+/456556
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Change-Id: I4cff6b2a1fed6acdf754539c3c53a61eaa3b3f84
Reviewed-on: https://go-review.googlesource.com/c/go/+/450176
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 450136 added handling for simple calls in staticinit. If there's any
derived types conversion in the body of generic function called, that
conversion will require runtime dictionary, thus the optimization could
not happen.
Fixes#56923
Change-Id: I498cee9f8ab4397812ef79a6c2ab6c55e0ee4aef
Reviewed-on: https://go-review.googlesource.com/c/go/+/453315
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Gabriel Morency (Amgc63spaming) <morencyvincent8@gmail.com>
if q != nil {
p = &q.f
}
Which gets rewritten to a conditional move:
tmp := &q.f
p = Select q!=nil, tmp, p
Unfortunately, we can't compute &q.f before we've checked if q is nil,
because if it is nil, &q.f is an invalid pointer (if f's offset is
nonzero but small).
Normally this is not a problem because the tmp variable above
immediately dies, and is thus not live across any safepoint. However,
if later there is another &q.f computation, those two computations are
CSEd, causing tmp to be used at both use points. That will extend
tmp's lifetime, possibly across a call.
Fixes#56990
Change-Id: I3ea31be93feae04fbe3304cb11323194c5df3879
Reviewed-on: https://go-review.googlesource.com/c/go/+/454155
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
This was disabled in CL 452676 out of an abundance of caution,
but further analysis has shown that the failures were not being
caused by this optimization. Instead the sequence of commits was:
CL 450136 cmd/compile: handle simple inlined calls in staticinit
...
CL 449937 archive/tar, archive/zip: return ErrInsecurePath for unsafe paths
...
CL 451555 cmd/compile: fix static init for inlined calls
The failures in question became compile failures in the first CL
and started building again after the last CL.
But in the interim the code had been broken by the middle CL.
CL 451555 was just the first time that the tests could run and fail.
For #30820.
Change-Id: I65064032355b56fdb43d9731be2f9f32ef6ee600
Reviewed-on: https://go-review.googlesource.com/c/go/+/452817
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL adds -d=inlstaticinit to control whether static initialization
of inlined function calls (added in CL 450136) is allowed.
We've needed to fix it once already (CL 451555) and Google-internal
testing is hitting additional failure cases, so putting this
optimization behind a feature flag seems appropriate regardless.
Also, while we diagnose and fix the remaining cases, this CL also
disables the optimization to avoid miscompilations.
Updates #56894.
Change-Id: If52a358ad1e9d6aad1c74fac5a81ff9cfa5a3793
Reviewed-on: https://go-review.googlesource.com/c/go/+/452676
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This CL changes cmd/compile to reject anonymous interface cycles like:
type I interface { m() interface { I } }
We don't anticipate any users to be affected by this change in
practice. Nonetheless, this CL also adds a `-d=interfacecycles`
compiler flag to suppress the error. And assuming no issue reports
from users, we'll move the check into go/types and types2 instead.
Updates #56103.
Change-Id: I1f1dce2d7aa19fb388312cc020e99cc354afddcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/445598
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
The previous rule may move the phi value into a wrong block.
This CL make it only rewrite the phi value not the If block,
so that the phi value will stay in old block.
Fixes#56777
Change-Id: I9479a5c7f28529786968413d35b82a16181bb1f1
Reviewed-on: https://go-review.googlesource.com/c/go/+/451496
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
For implementing interface to empty interface conversion, the compiler
generate code like:
var res *uint8
res = itab
if res != nil {
res = res.type
}
However, itab has type *uintptr, so the assignment is broken. The
problem is not shown up, until CL 450215, which call typecheck on this
broken assignment.
To fix this, just cast itab to *uint8 when doing the conversion.
Fixes#56768
Change-Id: Id42792d18e7f382578b40854d46eecd49673792c
Reviewed-on: https://go-review.googlesource.com/c/go/+/451256
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
CL 450136 made the compiler to be able to handle simple inlined calls in
staticinit. However, it's missed a condition when checking substituting
arg for param. If there's any non-trivial closures, it has captured one
of the param, so the substitution could not happen.
Fixes#56778
Change-Id: I427c9134e333e2f9af136c1a124da4d37d326f10
Reviewed-on: https://go-review.googlesource.com/c/go/+/451555
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
Cl 426334 removed its only usage, and now we have gcflags_noopt.
Change-Id: I3b33a8c868669deea00bf6dfcf8d81981504e293
Reviewed-on: https://go-review.googlesource.com/c/go/+/451255
Reviewed-by: Joedian Reid <joedian@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Given code like
func itou(i int) uint { return uint(i) }
var x = itou(-1)
the static inliner from CL 450136 was rewriting the code to
var x = uint(-1)
which is not valid Go code. Fix this by converting the
constants appropriately during inlining.
Fixes golang.org/x/image/vector test.
Change-Id: I13448df8504c6a70525b1cdc36e2c947e22cdd33
Reviewed-on: https://go-review.googlesource.com/c/go/+/451376
Auto-Submit: Russ Cox <rsc@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Fix noopt build break from CL 450136 by not running test.
I can't reproduce the failure locally, but it's entirely reasonable
for this test to fail when optimizations are disabled, so just don't
run it when optimizations are disabled.
Change-Id: I882760fc7373ba0449379f81d295312a6be49be1
Reviewed-on: https://go-review.googlesource.com/c/go/+/450740
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Michael Stapelberg <stapelberg@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Global variable initializers like
var myErr error = &myError{"msg"}
have been converted to statically initialized data
from the earliest days of Go: there is no init-time
execution or allocation for that line of code.
But if the expression is moved into an inlinable function,
the static initialization no longer happens.
That is, this code has always executed and allocated
at init time, even after we added inlining to the compiler,
which should in theory make this code equivalent to
the original:
func NewError(s string) error { return &myError{s} }
var myErr2 = NewError("msg")
This CL makes the static initialization rewriter understand
inlined functions consisting of a single return statement,
like in this example, so that myErr2 can be implemented as
statically initialized data too, just like myErr, with no init-time
execution or allocation.
A real example of code that benefits from this rewrite is
all globally declared errors created with errors.New, like
package io
var EOF = errors.New("EOF")
Package io no longer has to allocate and initialize EOF each
time a program starts.
Another example of code that benefits is any globally declared
godebug setting (using the API from CL 449504), like
package http
var http2server = godebug.New("http2server")
These are no longer allocated and initialized at program startup either.
The list of functions that are inlined into static initializers when
compiling std and cmd (along with how many times each occurs) is:
cmd/compile/internal/ssa.StringToAux (3)
cmd/compile/internal/walk.mkmapnames (4)
errors.New (360)
go/ast.NewIdent (1)
go/constant.MakeBool (4)
go/constant.MakeInt64 (3)
image.NewUniform (4)
image/color.ModelFunc (11)
internal/godebug.New (12)
vendor/golang.org/x/text/unicode/bidi.newBidiTrie (1)
vendor/golang.org/x/text/unicode/norm.newNfcTrie (1)
vendor/golang.org/x/text/unicode/norm.newNfkcTrie (1)
For the cmd/go binary, this CL cuts the number of init-time
allocations from about 1920 to about 1620 (a 15% reduction).
The total executable code footprint of init functions is reduced
by 24kB, from 137kB to 113kB (an 18% reduction).
The overall binary size is reduced by 45kB,
from 15.335MB to 15.290MB (a 0.3% reduction).
(The binary size savings is larger than the executable code savings
because every byte of executable code also requires corresponding
runtime tables for unwinding, source-line mapping, and so on.)
Also merge test/sinit_run.go, which had stopped testing anything
at all as of CL 161337 (Feb 2019) and initempty.go into a new test
noinit.go.
Fixes#30820.
Change-Id: I52f7275b1ac2a0a32e22c29f9095071c7b1fac20
Reviewed-on: https://go-review.googlesource.com/c/go/+/450136
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
CL 440455 fixed missing walk pass for static initialization slice.
However, slicelit may produce un-typechecked node, thus we need to do
typecheck for sinit before calling walkStmtList.
Fixes#56727
Change-Id: I40730cebcd09f2be4389d71c5a90eb9a060e4ab7
Reviewed-on: https://go-review.googlesource.com/c/go/+/450215
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Add a new SSA opcode ISELZ, similar to ISELB to represent a select
of value or 0. Then, merge candidate ISEL opcodes inside the late
lower pass.
This avoids complicating rules within the the lower pass.
Change-Id: I3b14c94b763863aadc834b0e910a85870c131313
Reviewed-on: https://go-review.googlesource.com/c/go/+/442596
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
If an imported, non-generic function F transitively calls a generic
function G[T], we may need to call CanInline on G[T].
While here, we can also take advantage of the fact that we know G[T]
was already seen and compiled in an imported package, so we don't need
to call InlineCalls or add it to typecheck.Target.Decls. This saves us
from wasting compile time re-creating DUPOK symbols that we know
already exist in the imported package's link objects.
Fixes#56280.
Change-Id: I3336786bee01616ee9f2b18908738e4ca41c8102
Reviewed-on: https://go-review.googlesource.com/c/go/+/443535
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
ISEL is roughly equivalent to CMOV on PPC64. Verify ISEL generation
in all reasonable cases.
Note "ISEL test x y z" is the same as "ISEL !test y x z". test is
always one of LT (0), GT (1), EQ (2), SO (3). Sometimes x and y are
swapped if GE/LE/NE is desired.
Change-Id: Ie1bf029224064e004d855099731fe5e8d05aa990
Reviewed-on: https://go-review.googlesource.com/c/go/+/445215
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Paul Murphy <murp@ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Prior to Go 1.18, ineffectual //go:linkname directives (i.e.,
directives referring to an undeclared name, or to a declared type or
constant) were treated as noops. In Go 1.18, we changed this into a
compiler error to mitigate accidental misuse.
However, the x/sys repo contained ineffectual //go:linkname directives
up until go.dev/cl/274573, which has caused a lot of user confusion.
It seems a bit late to worry about now, but to at least prevent
further user pain, this CL changes the error message to only apply to
modules using "go 1.18" or newer. (The x/sys repo declared "go 1.12"
at the time go.dev/cl/274573 was submitted.)
Fixes#55889.
Change-Id: Id762fff96fd13ba0f1e696929a9e276dfcba2620
Reviewed-on: https://go-review.googlesource.com/c/go/+/447755
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
This needs to be as low as possible while not breaking priority
assumptions of other scores to correctly schedule carry chains.
Prior to the arm64 changes, it was set below ReadTuple. At the time,
this prevented the MulHiLo implementation on PPC64 from occluding
the scheduling of a full carry chain.
Memory scores can also prevent better scheduling, as can be observed
with crypto/internal/edwards25519/field.feMulGeneric.
Fixes#56497
Change-Id: Ia4b54e6dffcce584faf46b1b8d7cea18a3913887
Reviewed-on: https://go-review.googlesource.com/c/go/+/447435
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The go1 benchmark suite does a lot of work at package init time, which
makes it take quite a while to run even if you're not running any of
the benchmarks, or if you're only running a subset of them. This leads
to an awkward workaround in dist test to compile but not run the
package, unlike roughly all other packages. It also reduces isolation
between benchmarks by affecting the starting heap size of all
benchmarks.
Fix this by initializing all data required by a benchmark when that
benchmark runs, and keeping it local so it gets freed by the GC and
doesn't leak between benchmarks. Now, none of the benchmarks depend on
global state.
Re-initializing the data on each benchmark run does add overhead to an
actual benchmark run, as each benchmark function is called several
times with different values of b.N. A full run of all benchmarks at
the default -benchtime=1s now takes ~10% longer; higher -benchtimes
would be less. It would be quite difficult to cache this data between
invocations of the same benchmark function without leaking between
different benchmarks and affecting GC overheads, as the testing
package doesn't provide any mechanism for this.
This reduces the time to run the binary with no benchmarks from 1.5
seconds to 10 ms, and also reduces the memory required to do this from
342 MiB to 17 MiB.
To make sure data was not leaking between different benchmarks, I ran
the benchmarks with -shuffle=on. The variance remained low: mostly
under 3%. A few benchmarks had higher variance, but in all cases it
was similar to the variance between this change.
This CL naturally changes the measured performance of several of the
benchmarks because it dramatically changes the heap size and hence GC
overheads. However, going forward the benchmarks should be much better
isolated.
For #37486.
Change-Id: I252ebea703a9560706cc1990dc5ad22d1927c7a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/443336
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Austin Clements <austin@google.com>
The recently added rule only works before decomposing slices.
Add a rule that works after decomposing slices.
The reason we need the latter is because although the length may
be a constant, it can be hidden inside a slice that is not constant
(its pointer or capacity might be changing). By applying this
optimization after decomposing slices, we can find more cases
where it applies.
Fixes#56440
Change-Id: I0094e59eee3065ab4d210defdda8227a6e897420
Reviewed-on: https://go-review.googlesource.com/c/go/+/446277
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Fixes a performance regression due to CL 418554.
Fixes#56440
Change-Id: I6ff152e9b83084756363f49ee6b0844a7a284880
Reviewed-on: https://go-review.googlesource.com/c/go/+/445875
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Error messages currently print floats with %.6g, which means that if
you tried to convert something close to, but not quite, an integer, to
an integer, the error you get looks like "cannot convert 1 to type
int", when really you want "cannot convert 0.9999999 to type int".
Add more digits to floats when printing them, to make it clear that they
aren't quite integers. This helps for errors which are the result of not
being an integer. For other errors, it won't hurt much.
Fixes#56220
Change-Id: I7f5873af5993114a61460ef399d15316925a15a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/442935
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Replace all uses of Ctz64/32/8 with TrailingZeros64/32/8, because they
are the same and maybe duplicated. Also renamed CtzXX functions in 386
assembly code.
Change-Id: I19290204858083750f4be589bb0923393950ae6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/438935
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Using importcfg instead of depending on the existence of .a files for
standard library packages will enable us to remove the .a files in a
future cl.
Change-Id: I6108384224508bc37d82fd990fc4a8649222502c
Reviewed-on: https://go-review.googlesource.com/c/go/+/440222
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
fakePC uses hash.Sum32, which returns an uint32. However, libfuzzer
trace/hook functions declare fakePC argument as int, causing overflow on
386 archs.
Fixing this by changing fakePC argument to uint to prevent the overflow.
Fixes#56141
Change-Id: I3994c461319983ab70065f90bf61539a363e0a2a
Reviewed-on: https://go-review.googlesource.com/c/go/+/441996
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #56109
Change-Id: I999763e463fac57732a92f5e396f8fa8c35bd2e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/440297
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
CL 403995 fixed static init of literal contains dynamic exprs, by
ensuring their init are ordered properly. However, we still need to walk
the generated init codes before appending to parent init. Otherwise,
codes that requires desugaring will be unhandled, causing the compiler
backend crashing.
Fixes#56105
Change-Id: Ic25fd4017473f5412c8e960a91467797a234edfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/440455
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
For example:
movb a0, a0
srai $1, a0, a0
the assembler will expand to:
slli $56, a0, a0
srai $56, a0, a0
srai $1, a0, a0
this CL optimize to:
slli $56, a0, a0
srai $57, a0, a0
Remove 270+ instructions from Go binary on linux/riscv64.
Change-Id: I375e19f9d3bd54f2781791d8cbe5970191297dc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/428496
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is the last failed test in Unified IR, since it can inline f5 and
f6 but the old frontend can not. So marking them as //go:noinline, with
a TODO for re-enable once GOEXPERIMENT=nounified is gone.
Fixes#53058
Change-Id: Ifbbc49c87997a53e1b323048f0067f0257655fad
Reviewed-on: https://go-review.googlesource.com/c/go/+/437217
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The mismatch between Unified IR and the old frontend is not about how
they number the closures, but how they name them. For nested closure,
the old frontend use the immediate function which contains the closure
as the outer function, while Unified IR uses the outer most function as
the outer for all closures.
That said, what important is matching the number of closures, not their
name prefix. So this CL relax the test to match both "main.func1.func2"
and "main.func1.2" to satisfy both Unified IR and the old frontend.
Updates #53058
Change-Id: I66ed816d1968aa68dd3089a4ea5850ba30afd75b
Reviewed-on: https://go-review.googlesource.com/c/go/+/437216
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The linker needs FuncInfo metadata for all inlined functions. This is
typically handled by gc.enqueueFunc calling ir.InitLSym for all function
declarations in typecheck.Target.Decls (ir.UseClosure adds all closures
to Decls).
However, non-trivial closures in Decls are ignored, and are insteaded
enqueued when walk of the calling function discovers them.
This presents a problem for direct calls to closures. Inlining will
replace the entire closure definition with its body, which hides the
closure from walk and thus suppresses symbol creation.
Explicitly create a symbol early in this edge case to ensure we keep
this metadata.
InitLSym needs to move out of ssagen to avoid a circular dependency (it
doesn't have anything to do with ssa anyway). There isn't a great place
for it, so I placed it in ir, which seemed least objectionable.
The added test triggers one of these inlined direct non-trivial closure
calls, though the test needs CL 429637 to fail, which adds a FuncInfo
assertion to the linker. Note that the test must use "run" instead of
"compile" since the assertion is in the linker, and "compiler" doesn't
run the linker.
Fixes#54959.
Change-Id: I0bd1db4f3539a78da260934cd968372b7aa92546
Reviewed-on: https://go-review.googlesource.com/c/go/+/436240
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
If a cycle has length 1, don't enumerate the single cycle entry;
instead just mention "refers to itself". For instance, for an
invalid recursive type T we now report:
invalid recursive type: T refers to itself
instead of:
invalid recursive type T
T refers to
T
Adjust tests to check for the different error messages.
Change-Id: I5bd46f62fac0cf167f0d0c9a55f952981d294ff4
Reviewed-on: https://go-review.googlesource.com/c/go/+/436295
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
This matches what go/types and types2 report and it also matches
the compiler errors reported for some related shift problems.
For #55326.
Change-Id: Iee40e8d988d5a7f9ff2c49f019884d02485c9fdf
Reviewed-on: https://go-review.googlesource.com/c/go/+/436177
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is close to what the compiler used to say, except now we say
"as T value" rather than "as type T" which is closer to the truth
(we cannot use a value as a type, after all). Also, place the primary
error and the explanation (cause) on a single line.
Make respective (single line) adjustment to the matching "cannot
convert" error.
Adjust various tests.
For #55326.
Change-Id: Ib646cf906b11f4129b7ed0c38cf16471f9266b88
Reviewed-on: https://go-review.googlesource.com/c/go/+/436176
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Compromise between old compiler error "T.m redeclared in this block"
(where the "in this block" is not particularly helpful) and the old
type-checker error "method m already declared for type T ...".
In the case where we have position information for the original
declaration, the error message is "method T.m already declared at
<position>". The new message is both shorter and more precise.
For #55326.
Change-Id: Id4a7f326fe631b11db9e8030eccb417c72d6c7db
Reviewed-on: https://go-review.googlesource.com/c/go/+/435016
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
This is a compromise of the error reported by the compiler (quotes
around field name removed) and the error reported by the type checkers
(added mention of struct type).
For #55326.
Change-Id: Iac4fb5c717f17c6713e90d327d39e68d3be40074
Reviewed-on: https://go-review.googlesource.com/c/go/+/434815
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
This matches longstanding compiler behavior.
Also, for unused packages, report:
`"pkg" imported and not used`
`"pkg" imported as X and not used`
This matches the other `X declared and not used` errors.
For #55326.
Change-Id: Ie71cf662fb5f4648449c64fc51bede298a1bdcbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/432557
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Partial overlaps can only happen for strict sub-pieces of larger arrays.
That's a much stronger condition than the current optimization rules.
Update #54467
Change-Id: I11e539b71099e50175f37ee78fddf69283f83ee5
Reviewed-on: https://go-review.googlesource.com/c/go/+/433056
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
1. replace [0-9] with \d in regexps
2. replace [a-zA-Z0-9_] with \w in regexps
Change-Id: I9e260538252a0c1071e76aeb1c5f885c6843a431
GitHub-Last-Rev: 286e1a4619
GitHub-Pull-Request: golang/go#54874
Reviewed-on: https://go-review.googlesource.com/c/go/+/428435
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
For #55326
Change-Id: I3d0ff7f820f7b2009d1b226abf701b2337fe8cbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/432635
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: xie cui <523516579@qq.com>
Reviewed-by: Robert Griesemer <gri@google.com>
This CL adds some optimizaion rules:
1, Converts CMP to CMN, or vice versa, when comparing with a negative
number.
2, For equal and not equal comparisons, CMP can be converted to CMN in
some cases. In theory we could do the same optimization for LT, LE, GT
and GE, but need to account for overflow, this CL doesn't handle them.
There are no noticeable performance changes.
Change-Id: Ia49266c019ab7908ebc9510c2f02e121b1607869
Reviewed-on: https://go-review.googlesource.com/c/go/+/429795
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
The nounified frontend currently tries to construct dictionaries that
correspond to invalid instantiations (i.e., instantiations T[X] where
X does not satisfy the constraints specified on T's type parameter).
As a consequence, we may fail to find method expressions needed by the
dictionary.
The real fix for this is to avoid creating those dictionaries in the
first place, because they should never actually be needed at runtime.
But that seems scary for a backport: we've repeatedly attempted to
backport generics fixes, which have fixed one issue but introduced
another.
This CL is a minimally invasive solution to #54225, which avoids the
ICE by instead skipping emitting the invalid dictionary. If the
dictionary ends up not being needed (which I believe will always be
the case), then the linker's reachability analysis will simply ignore
its absence.
Or worst case, if the dictionary *is* reachable somehow, we've simply
turned an ICE into a link-time missing symbol failure. That's not
great for user experience, but it seems like a small trade off to
avoid risking breaking any other currently working code.
Updates #54225.
Change-Id: Ic379696079f4729b1dd6a66994a58cca50281a84
Reviewed-on: https://go-review.googlesource.com/c/go/+/429655
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The conversion T(x) is implemented as *(*T)(x). Accordingly, runtime
panic messages for (*T)(x) are made more general.
Fixes#46505.
Change-Id: I76317c0878b6a5908299506d392eed50d7ef6523
Reviewed-on: https://go-review.googlesource.com/c/go/+/430415
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Jenny Rakoczy <jenny@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
This test case already works with GOEXPERIMENT=unified, and it never
worked with Go 1.18 or Go 1.19. So this CL simply adds a regress test
to make sure it continues working.
Fixes#55101.
Change-Id: I7e06bfdc136ce124f65cdcf02d20a1050b841d42
Reviewed-on: https://go-review.googlesource.com/c/go/+/431455
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The type of the source and destination of a memmove call isn't
always accurate. It will always be a pointer (or an unsafe.Pointer), but
the base type might not be accurate. This comes about because multiple
copies of a pointer with different base types are coalesced into a single value.
In the failing example, the IData selector of the input argument is a
*[32]byte in one branch of the type switch, and a *[]byte in the other branch.
During the expand_calls pass both IDatas become just copies of the input
register. Those copies are deduped and an arbitrary one wins (in this case,
*[]byte is the unfortunate winner).
Generally an op v can rely on v.Type during rewrite rules. But relying
on v.Args[i].Type is discouraged.
Fixes#55122
Change-Id: I348fd9accf2058a87cd191eec01d39cda612f120
Reviewed-on: https://go-review.googlesource.com/c/go/+/431496
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Now we have 8-byte alignment types on 32-bit system, so in some rare
case, e.g, generated wrapper for embedded interface, the function
argument may need more than 4 byte alignment. We could pad somehow, but
this is a rare case which makes it hard to ensure that we've got it right.
So relaxing the check for argument and return value region of the stack.
Fixes#54991
Change-Id: I34986e17a920254392a39439ad3dcb323da2ea8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/431098
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
When SLTI/SLTIU is used with ANDI/ORI, it may be possible to determine the
outcome based on the values of the immediates. Resolve these cases.
Improves code generation for various shift operations.
While here, sort tests by architecture to improve readability and ease
future maintenance.
Change-Id: I87e71e016a0e396a928e7d6389a2df61583dfd8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/428217
Reviewed-by: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Jenny Rakoczy <jenny@golang.org>
Reviewed-by: Jenny Rakoczy <jenny@golang.org>
Run-TryBot: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Jenny Rakoczy <jenny@golang.org>
Go 1.19 introduce new append-like APIs in package encoding/binary, this
change teaches the inliner to treat calls to these methods as cheap, so
that code using them will be more inlineable.
Updates #42958
Change-Id: Ie3dd4906e285430f435bdedbf8a11fdffce9302d
Reviewed-on: https://go-review.googlesource.com/c/go/+/431015
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Jenny Rakoczy <jenny@golang.org>
Reviewed-by: Jenny Rakoczy <jenny@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Jenny Rakoczy <jenny@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@google.com>
This CL adds shiftIsBounded checks for the Lsh* and Rsh* rules in arm64.
There is no need to check the shift value again with CMP + CSEL when the
shift value is valid.
Change-Id: I54620de64f02a1b5a11089add237248ae2de01b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/417714
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
When naming case variables, the unified frontend was using
typecheck.Lookup, which uses the current package, rather than
localIdent, which uses the package the variable was originally
declared in. When inlining across package boundaries, this could cause
the case variables to be associated with the wrong package.
In practice, I don't believe this has any negative consequences, but
it's inconsistent and triggered an ICE in typecheck.ClosureType, which
expected all captured variables to be declared in the same package.
Easy fix is to ensure case variables are declared in the correct
package by using localIdent.
Fixes#54912.
Change-Id: I7a429c708ad95723f46a67872cb0cf0c53a6a0d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/428918
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
The unified frontend ICEs when inlining a function that contains a
function literal, which captures both a type switch case variable and
another variable.
Updates #54912.
Change-Id: I0e16d371ed5df48a70823beb0bf12110a5a17266
Reviewed-on: https://go-review.googlesource.com/c/go/+/428917
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The toStringData test was meant to test reflect.StringHeader, not
reflect.SliceHeader. It's not supported to convert *string to
*reflect.SliceHeader anyway.
Change-Id: Iaa4912eafd241886c6337bd7607cdf2412a15ead
Reviewed-on: https://go-review.googlesource.com/c/go/+/428995
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
It was fixed by CL 422196, and have been already worked in unified IR.
Fixes#54911
Change-Id: Ie69044a64b296f6961e667e7661d8c4d1a24d84e
Reviewed-on: https://go-review.googlesource.com/c/go/+/428758
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit CL 427140.
Reason for revert: Comments say that done should be the first field.
Change-Id: Id131da064146b44e1182289546aeb877867e63cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/428638
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For defer/go calls, the function/method value are evaluated immediately.
So after devirtualizing, it may trigger a panic when implicitly deref
a nil pointer receiver, causing the program behaves unexpectedly.
It's safer to not devirtualizing defer/go calls at all.
Fixes#52072
Change-Id: I562c2860e3e577b36387dc0a12ae5077bc0766bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/428495
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Change-Id: I49f8c764d49cabaad4d6859c219ba7220a389c1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/427140
Run-TryBot: xie cui <523516579@qq.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Currently, gentraceback tracks the closure context of the outermost
frame. This used to be important for "unstarted" calls to reflect
function stubs, where "unstarted" calls are either deferred functions
or the entry-point of a goroutine that hasn't run. Because reflect
function stubs have a dynamic argument map, we have to reach into
their closure context to fetch to map, and how to do this differs
depending on whether the function has started. This was discovered in
issue #25897.
However, as part of the register ABI, "go" and "defer" were made much
simpler, and any "go" or "defer" of a function that takes arguments or
returns results gets wrapped in a closure that provides those
arguments (and/or discards the results). Hence, we'll see that closure
instead of a direct call to a reflect stub, and can get its static
argument map without any trouble.
The one case where we may still see an unstarted reflect stub is if
the function takes no arguments and has no results, in which case the
compiler can optimize away the wrapper closure. But in this case we
know the argument map is empty: the compiler can apply this
optimization precisely because the target function has no argument
frame.
As a result, we no longer need to track the closure context during
traceback, so this CL drops all of that mechanism.
We still have to be careful about the unstarted case because we can't
reach into the function's locals frame to pull out its context
(because it has no locals frame). We double-check that in this case
we're at the function entry.
I would prefer to do this with some in-code PCDATA annotations of
where to find the dynamic argument map, but that's a lot of mechanism
to introduce for just this. It might make sense to consider this along
with #53609.
Finally, we beef up the test for this so it more reliably forces the
runtime down this path. It's fundamentally probabilistic, but this
tweak makes it better. Scheduler testing hooks (#54475) would make it
possible to write a reliable test for this.
For #54466, but it's a nice clean-up all on its own.
Change-Id: I16e4f2364ba2ea4b1fec1e27f971b06756e7b09f
Reviewed-on: https://go-review.googlesource.com/c/go/+/424254
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
In go.dev/cl/421821, I included a hack to force OCONVNOP back to
OCONVIFACE for conversions involving shape types and non-empty
interfaces. The comment correctly noted that this was only needed for
conversions between non-identical types, but the code was conservative
and applied to even conversions between identical types.
This CL adds an extra bool to record whether the conversion is between
identical types, so we can keep OCONVNOP instead of forcing back to
OCONVIFACE. This has a small improvement to generated code, because we
no longer need a convI2I call (as demonstrated by codegen/ifaces.go).
But more usefully, this is relevant to pruning unnecessary itab slots
in runtime dictionaries (next CL).
Change-Id: I94f89e961cd26629b925037fea58d283140766ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/427678
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This CL changes the heuristic used to determine whether we can inline a
struct equality check or if we must generate a function and call that
function for equality.
The old method was to count struct fields, but this can lead to poor
in lining decisions. We should really be determining the cost of the
equality check and use that to determine if we should inline or generate
a function.
The new benchmark provided in this CL returns the following when compared
against tip:
```
name old time/op new time/op delta
EqStruct-32 2.46ns ± 4% 0.25ns ±10% -89.72% (p=0.000 n=39+39)
```
Fixes#38494
Change-Id: Ie06b80a2b2a03a3fd0978bcaf7715f9afb66e0ab
GitHub-Last-Rev: e9a18d9389
GitHub-Pull-Request: golang/go#53326
Reviewed-on: https://go-review.googlesource.com/c/go/+/411674
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This CL optimizes RotateLeft8/16 on arm64.
For 16 bits, we form a 32 bits register by duplicating two 16 bits
registers, then use RORW instruction to do the rotate shift.
For 8 bits, we just use LSR and LSL instead of RORW because the code is
simpler.
Benchmark Old ThisCL delta
RotateLeft8-46 2.16 ns/op 1.73 ns/op -19.70%
RotateLeft16-46 2.16 ns/op 1.54 ns/op -28.53%
Change-Id: I09cde4383d12e31876a57f8cdfd3bb4f324fadb0
Reviewed-on: https://go-review.googlesource.com/c/go/+/420976
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
So they can be added to ignored list, since the tests now require
cgo.Incomplete, which is not recognized by go/types and types2.
Updates #46731
Change-Id: I9f24e3c8605424d1f5f42ae4409437198f4c1326
Reviewed-on: https://go-review.googlesource.com/c/go/+/427142
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
For the following code case:
var x uint64
x >> (shift & 63)
We can directly genereta `x >> shift` on arm64, since the hardware will
only use the bottom 6 bits of the shift amount.
Benchmark old time/op new time/op delta
ShiftArithmeticRight-8 0.40ns 0.31ns -21.7%
Change-Id: Id58c8a5b2f6dd5c30c3876f4a36e11b4d81e2dc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/425294
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
On AIX when external linking, for some symbols we need to add
dummy references to prevent the external linker from discarding
them. Currently we add the reference unconditionally. But if the
symbol doesn't exist, the linking fails in a later stage for
generating external relocation of a nonexistent symbol. The
symbols are special symbols that almost always exist, except that
go:buildid may not exist if the linker is invoked without the
-buildid flag. The go command invokes the linker with the flag, so
this can only happen with manual linker invocation. Specifically,
test/run.go does this in some cases.
Fix this by checking the symbol existence before adding the
reference. Re-enable tests on AIX.
Perhaps the linker should always emit a dummy buildid even if the
flag is not set...
Fixes#54814.
Change-Id: I43d81587151595309e189e38960cbda9a1c5ca32
Reviewed-on: https://go-review.googlesource.com/c/go/+/427620
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
So it won't be visible outside of runtime package. There are changes to
make tests happy:
- For test/directive*.go files, using "go:noinline" for testing misplaced
directives instead.
- Restrict test/fixedbugs/bug515.go for gccgo only.
- For test/notinheap{2,3}.go, using runtime/cgo.Incomplete for marking
the type as not-in-heap. Though it's somewhat clumsy, it's the easiest
way to keep the test errors for not-in-heap types until we can cleanup
further.
- test/typeparam/mdempsky/11.go is about defined type in user code marked
as go:notinheap, which can't happen after this CL, though.
Fixes#46731
Change-Id: I869f5b2230c8a2a363feeec042e7723bbc416e8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/421882
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Joedian Reid <joedian@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The syntax for go and defer specifies an arbitrary expression, not
a call; the call requirement is spelled out in prose. Don't to the
call check in the parser; instead move it to the type checker. This
is simpler and also allows the type checker to check expressions that
are not calls, and avoid "not used" errors due to such expressions.
We would like to make the same change in go/parser and go/types
but the change requires Go/DeferStmt nodes to hold an ast.Expr
rather than an *ast.CallExpr. We cannot change that for backward-
compatibility reasons. Since we don't test this behavior for the
type checkers alone (only for the compiler), we get away with it
for now.
Follow-up on CL 425675 which introduced the extra errors in the
first place.
Change-Id: I90890b3079d249bdeeb76d5673246ba44bec1a7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/425794
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
- Use "expected X" rather then "expecting X".
- Report a better error when a type argument list is expected.
- Adjust various tests.
For #54511.
Change-Id: I0c5ca66ecbbdcae1a8f67377682aae6b0b6ab89a
Reviewed-on: https://go-review.googlesource.com/c/go/+/425734
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
If the go/defer syntax is bad, using a fake CallExpr may produce
a follow-on error in the type checker. Instead store a BadExpr
in the syntax tree (since an error has already been reported).
Adjust various tests.
For #54511.
Change-Id: Ib2d25f8eab7d5745275188d83d11620cad6ef47c
Reviewed-on: https://go-review.googlesource.com/c/go/+/425675
Reviewed-by: Alan Donovan <adonovan@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Since when go/types,types2 do not know about build constraints, and
runtime/cgo.Incomplete is only available on platforms that support cgo.
These tests are also failing on aix with failure from linker, so disable
them on aix to make builder green. The fix for aix is tracked in #54814
Updates #46731
Updates #54814
Change-Id: I5d6f6e29a8196efc6c457ea64525350fc6b20309
Reviewed-on: https://go-review.googlesource.com/c/go/+/427394
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Same as CL 421880, but for test directory.
Updates #46731
Change-Id: If8d18df013a6833adcbd40acc1a721bbc23ca6b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/421881
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
After running the types2 type checker, walk info.Instances to reject
any not-in-heap type arguments. This is feasible to check using the
types2 API now, thanks to #46731.
Fixes#54765.
Change-Id: Idd2acc124d102d5a76f128f13c21a6e593b6790b
Reviewed-on: https://go-review.googlesource.com/c/go/+/427235
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Rotating by c, then by d, is the same as rotating by c+d.
Change-Id: I36df82261460ff80f7c6d39bcdf0e840cef1c91a
Reviewed-on: https://go-review.googlesource.com/c/go/+/424894
Reviewed-by: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Ruinan Sun <Ruinan.Sun@arm.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Currently we use a full cmpstring to do the comparison for each
split in the binary search for a string switch.
Instead, split by comparing a single byte of the input string with a
constant. That will give us a much faster split (although it might be
not quite as good a split).
Fixes#53333
R=go1.20
Change-Id: I28c7209342314f367071e4aa1f2beb6ec9ff7123
Reviewed-on: https://go-review.googlesource.com/c/go/+/414894
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
for i := 0; i < 9; i += 3
Currently we compute bounds of [0,8]. Really we know that it is [0,6].
CL 415874 computed the better bound as part of overflow detection.
This CL just incorporates that better info to the prove pass.
R=go1.20
Change-Id: Ife82cc415321f6652c2b5d132a40ec23e3385766
Reviewed-on: https://go-review.googlesource.com/c/go/+/415937
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
The prove pass will mark some shifts bounded, and then we can use that
information to generate better code on riscv64.
Change-Id: Ia22f43d0598453c9417adac7017db28d7240948b
Reviewed-on: https://go-review.googlesource.com/c/go/+/422616
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Joel Sing <joel@sing.id.au>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
If x+delta cannot overflow/underflow, we can derive:
x+delta < x if delta<0 (this CL included)
x+delta > x if delta>0 (this CL not included due to
a recursive stack overflow)
Remove 95 bounds checks during ./make.bat
Fixes#51622
Change-Id: I60d9bd84c5d7e81bbf808508afd09be596644f09
Reviewed-on: https://go-review.googlesource.com/c/go/+/406175
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
CL 327871 changes methodWrapper to always perform inlining after global
escape analysis. However, inlining the method may reveal closures, which
require walking all function bodies to decide whether to capture free
variables by value or by ref.
To fix it, just not doing inline if the method contains any closures.
Fixes#53702
Change-Id: I4b0255b86257cc6fe7e5fafbc545cc5cff9113e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/426334
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Shape-based stenciling in unified IR is done by converting type argument
to its underlying type. So it agressively check that type argument is
not a TFORW. However, for recursive instantiated type argument, it may
still be a TFORW when shapifying happens. Thus the assertion failed,
causing the compiler crashing.
To fix it, just allow fully instantiated type when shapifying.
Fixes#54512Fixes#54722
Change-Id: I527e3fd696388c8a37454e738f0324f0c2ec16cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/426335
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
