In f the extra & 63 is redundant because SHRQ already
looks at the bottom 6 bits only. This is a trick on AMD64
to get rid of CMPQ/SBBQ/ANDQ if one knows that the shift
counter is small.
func f(x uint64, s uint) uint64 {
return x >> (s & 63)
}
Change-Id: I4861c902168dabec9a6a14a85750246dde94fc08
Reviewed-on: https://go-review.googlesource.com/21073
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
g used to produce CMPQ/SBBQ/ANDQ, but f didn't even though
s&15 is at most s&63.
func f(x uint64, s uint) uint64 {
return x >> (s & 63)
}
func g(x uint64, s uint) uint64 {
return x >> (s & 15)
}
Change-Id: Iab4a1a6e10b471dead9f1203e9d894677cf07bb2
Reviewed-on: https://go-review.googlesource.com/21048
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The current runtime attempts to forward signals generated by non-Go
code to the original signal handler. If it can't call the original
handler directly, it currently attempts to re-raise the signal after
resetting the handler. In this case, the original context is lost.
This fix prevents that problem by simply returning from the go signal
handler after resetting the original handler. It only does this when
the original handler is the system default handler, which in all cases
is known to not recover. The signal is not reset, so it is retriggered
and the original handler takes over with the proper context.
Fixes#14899
Change-Id: Ib1c19dfa4b50d9732d7a453de3784c8141e1cbb3
Reviewed-on: https://go-review.googlesource.com/21006
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Android doesn't (generally) have /bin/sh.
Change-Id: I343817c342e3473d09c85155761682b5ddb043e4
Reviewed-on: https://go-review.googlesource.com/21075
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#14938.
Additionally some simplifications along the way.
Change-Id: I2c5fb7e32dcc6fab68fff36a49cb72e715756abe
Reviewed-on: https://go-review.googlesource.com/21046
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
The iOS exec wrapper use complicated machinery to run a iOS binary
on a device.
Running several binaries concurrently doesn't work (reliably), which
can break tests running concurrently. For my setup, the
runtime:cpu124 and sync_cpu tests can't run reliably without one of them
crashing.
Add a file lock to the exec wrapper to serialize execution.
Fixes#14318 (for me)
Change-Id: I023610e014b327f8d66f1d2fd2e54dd0e56f2be0
Reviewed-on: https://go-review.googlesource.com/21074
Reviewed-by: David Crawshaw <crawshaw@golang.org>
CL 20892 converted the misc/cgo/testcarchive test to Go.
Unfortunately, dist does not (yet) support tests running off the host
so the testcarchive is disabled for now.
For #14318
Change-Id: Iab3d0a7b5309187a603b48f22a7fa736f089f89d
Reviewed-on: https://go-review.googlesource.com/21070
Reviewed-by: David Crawshaw <crawshaw@golang.org>
A retry mechanism is in place to combat the inherent flakiness of
launching iOS test binaries. Before it covered just the starting of
lldb; expand it to cover the setup steps as well. Note that the
running of the binary itself is (still) not retried, to avoid
covering over genuine bugs.
On my test device (iPhone 5S, iOS 9.3) starting lldb can take longer
than 10 seconds, so increase the timeout for that.
Furthermore, some basic steps such as setting breakpoints in lldb
can take longer than the 1 second timeout. Increase that timeout
as well, to 2 seconds.
Finally, improve the error message for when ios-deploy is not
installed.
For #14318
Change-Id: Iba41d1bd9d023575b9454cb577b08f8cae081c2a
Reviewed-on: https://go-review.googlesource.com/21072
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Instruct lldb to pass through SIGCONT unhindered when running iOS
tests. Fixes the TestSIGCONT test in os/signal.
For #14318
Change-Id: I669264208cc3d6ecae9fbc8790e0b753a93a5e04
Reviewed-on: https://go-review.googlesource.com/21071
Reviewed-by: David Crawshaw <crawshaw@golang.org>
For darwin/arm{,64} a non-Go thread is created to convert
EXC_BAD_ACCESS to panics. However, the Go signal handler refuse to
handle signals that would otherwise be ignored if they arrive at
non-Go threads.
Block all (posix) signals to that thread, making sure that
no unexpected signals arrive to it. At least one test, TestStop in
os/signal, depends on signals not arriving on any non-Go threads.
For #14318
Change-Id: I901467fb53bdadb0d03b0f1a537116c7f4754423
Reviewed-on: https://go-review.googlesource.com/21047
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Some minor scoping cleanups found by a very old version of grind.
Change-Id: I1d373817586445fc87e38305929097b652696fdd
Reviewed-on: https://go-review.googlesource.com/21064
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ignore superfluous trailing IDAT chunks which were not consumed when decoding
the image. This change fixes decoding of valid images in which a zero-length
IDAT chunk appears after the actual image data. It also prevents decoding of
trailing garbage IDAT chunks or maliciously embedded additional images.
Fixes#14936
Change-Id: I8c76cfa9a03496d9576f72bed2db109271f97c5e
Reviewed-on: https://go-review.googlesource.com/21045
Reviewed-by: Nigel Tao <nigeltao@golang.org>
If name is /dev/{stdin,stdout,stderr}, return fileInfo.
Fixes#14853.
Change-Id: Ibf7d1ae7b9f3dc43f6ed7c905ea2c5102e1971cc
Reviewed-on: https://go-review.googlesource.com/20845
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
This commit replaces some of
for i := len(x) - 1; i >= 0; i-- {...}
style loops, which do not rely on reverse iteration order.
Change-Id: I5542834286562da058200c06e7a173b13760e54d
Reviewed-on: https://go-review.googlesource.com/21044
Reviewed-by: Keith Randall <khr@golang.org>
Get rid of (*Mpint).Add's "quiet" parameter: it's always set to 0.
Inline (*Mpint).shift into (*Mpint).Lsh and (*Mpint).Rsh. There's no
need for a common shift method that can handle both left or right
shifts based on sign when the higher level abstractions only ever do
one or the other.
Change-Id: Icd3b082413f9193961b6835279e0bd4b6a6a6621
Reviewed-on: https://go-review.googlesource.com/21050
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Start working on arm port. Gets close to correct
code for fibonacci:
func fib(n int) int {
if n < 2 {
return n
}
return fib(n-1) + fib(n-2)
}
Still a lot to do, but this is a good starting point.
Cleaned up some arch-specific dependencies in regalloc.
Change-Id: I4301c6c31a8402168e50dcfee8bcf7aee73ea9d5
Reviewed-on: https://go-review.googlesource.com/21000
Reviewed-by: David Chase <drchase@google.com>
Remove reflect type information for unexported methods that do not
satisfy any interface in the program.
Ideally the unexported method would not appear in the method list at
all, but that is tricky because the slice is built by the compiler.
Reduces binary size:
cmd/go: 81KB (0.8%)
jujud: 258KB (0.4%)
For #6853.
Change-Id: I25ef8df6907e9ac03b18689d584ea46e7d773043
Reviewed-on: https://go-review.googlesource.com/21033
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
khr: Lifting the nil check out of the loop altogether is an admirable
goal, and this rewrite is one step on the way. But without lifting it
out of the loop, the rewrite is just hurting us.
Fixes#14917
Change-Id: Idb917f37d89f50f8e046d5ebd7c092b1e0eb0633
Reviewed-on: https://go-review.googlesource.com/21040
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation for Equal and similar
functions in the bytes package operate on one byte at
at time. This performs poorly on ppc64/ppc64le especially
when the byte buffers are large. This change improves
those functions by loading and comparing double words where
possible. The common code has been moved to a function
that can be shared by the other functions in this
file which perform the same type of comparison.
Further optimizations are done for the case where
>= 32 bytes are being compared. The new function
memeqbody is used by memeq_varlen, Equal, and eqstring.
When running the bytes test with -test.bench=Equal
benchmark old MB/s new MB/s speedup
BenchmarkEqual1 164.83 129.49 0.79x
BenchmarkEqual6 563.51 445.47 0.79x
BenchmarkEqual9 656.15 1099.00 1.67x
BenchmarkEqual15 591.93 1024.30 1.73x
BenchmarkEqual16 613.25 1914.12 3.12x
BenchmarkEqual20 682.37 1687.04 2.47x
BenchmarkEqual32 807.96 3843.29 4.76x
BenchmarkEqual4K 1076.25 23280.51 21.63x
BenchmarkEqual4M 1079.30 13120.14 12.16x
BenchmarkEqual64M 1073.28 10876.92 10.13x
It was determined that the degradation in the smaller byte tests
were due to unfavorable code alignment of the single byte loop.
Fixes#14368
Change-Id: I0dd87382c28887c70f4fbe80877a8ba03c31d7cd
Reviewed-on: https://go-review.googlesource.com/20249
Reviewed-by: Minux Ma <minux@golang.org>
This changes how matching is done in deflate algorithm.
The major change is that we do not look for matches that are only
3 bytes in length, matches must be 4 bytes at least.
Contrary to what you would expect this actually improves the
compresion ratio, since 3 literal bytes will often be shorter
than a match after huffman encoding.
This varies a bit by source, but is most often the case when the
source is "easy" to compress.
Second of all, a "stronger" hash is used. The hash is similar to
the hashing function used by Snappy.
Overall, the speed impact is biggest on higher compression levels.
I intend to replace the "speed" compression level, which can be
seen in CL 21021.
The built-in benchmark using "digits" is slower at level 1.
I see this as an exception, since "digits" is a special type
of data, where you have low entropy (numbers 0->9), but no
significant matches. Again, CL 20021 fixes that case.
NewWriterDict is also made considerably faster, by not running data
through the entire encoder. This is not reflected by the benchmark.
Overall, the speed impact is biggest on higher compression levels.
I intend to replace the "speed" compression level.
COMPARED to tip/master:
name old time/op new time/op delta
EncodeDigitsSpeed1e4-4 401µs ± 1% 345µs ± 2% -13.95%
EncodeDigitsSpeed1e5-4 3.19ms ± 1% 4.27ms ± 3% +33.96%
EncodeDigitsSpeed1e6-4 27.7ms ± 4% 43.8ms ± 3% +58.00%
EncodeDigitsDefault1e4-4 641µs ± 0% 403µs ± 1% -37.15%
EncodeDigitsDefault1e5-4 13.8ms ± 1% 6.4ms ± 3% -53.73%
EncodeDigitsDefault1e6-4 162ms ± 1% 64ms ± 2% -60.51%
EncodeDigitsCompress1e4-4 627µs ± 1% 405µs ± 2% -35.45%
EncodeDigitsCompress1e5-4 13.9ms ± 0% 6.3ms ± 2% -54.46%
EncodeDigitsCompress1e6-4 159ms ± 1% 64ms ± 0% -59.91%
EncodeTwainSpeed1e4-4 433µs ± 4% 331µs ± 1% -23.53%
EncodeTwainSpeed1e5-4 2.82ms ± 1% 3.08ms ± 0% +9.10%
EncodeTwainSpeed1e6-4 28.1ms ± 2% 28.8ms ± 0% +2.82%
EncodeTwainDefault1e4-4 695µs ± 4% 474µs ± 1% -31.78%
EncodeTwainDefault1e5-4 11.8ms ± 0% 7.4ms ± 0% -37.31%
EncodeTwainDefault1e6-4 128ms ± 0% 75ms ± 0% -40.93%
EncodeTwainCompress1e4-4 719µs ± 3% 480µs ± 0% -33.27%
EncodeTwainCompress1e5-4 15.0ms ± 3% 8.2ms ± 2% -45.55%
EncodeTwainCompress1e6-4 170ms ± 0% 85ms ± 1% -49.99%
name old speed new speed delta
EncodeDigitsSpeed1e4-4 25.0MB/s ± 1% 29.0MB/s ± 2% +16.24%
EncodeDigitsSpeed1e5-4 31.4MB/s ± 1% 23.4MB/s ± 3% -25.34%
EncodeDigitsSpeed1e6-4 36.1MB/s ± 4% 22.8MB/s ± 3% -36.74%
EncodeDigitsDefault1e4-4 15.6MB/s ± 0% 24.8MB/s ± 1% +59.11%
EncodeDigitsDefault1e5-4 7.27MB/s ± 1% 15.72MB/s ± 3% +116.23%
EncodeDigitsDefault1e6-4 6.16MB/s ± 0% 15.60MB/s ± 2% +153.25%
EncodeDigitsCompress1e4-4 15.9MB/s ± 1% 24.7MB/s ± 2% +54.97%
EncodeDigitsCompress1e5-4 7.19MB/s ± 0% 15.78MB/s ± 2% +119.62%
EncodeDigitsCompress1e6-4 6.27MB/s ± 1% 15.65MB/s ± 0% +149.52%
EncodeTwainSpeed1e4-4 23.1MB/s ± 4% 30.2MB/s ± 1% +30.68%
EncodeTwainSpeed1e5-4 35.4MB/s ± 1% 32.5MB/s ± 0% -8.34%
EncodeTwainSpeed1e6-4 35.6MB/s ± 2% 34.7MB/s ± 0% -2.77%
EncodeTwainDefault1e4-4 14.4MB/s ± 4% 21.1MB/s ± 1% +46.48%
EncodeTwainDefault1e5-4 8.49MB/s ± 0% 13.55MB/s ± 0% +59.50%
EncodeTwainDefault1e6-4 7.83MB/s ± 0% 13.25MB/s ± 0% +69.19%
EncodeTwainCompress1e4-4 13.9MB/s ± 3% 20.8MB/s ± 0% +49.83%
EncodeTwainCompress1e5-4 6.65MB/s ± 3% 12.20MB/s ± 2% +83.51%
EncodeTwainCompress1e6-4 5.88MB/s ± 0% 11.76MB/s ± 1% +100.06%
Change-Id: I724e33c1dd3e3a6a1b0a68e094baa959352baf32
Reviewed-on: https://go-review.googlesource.com/20929
Run-TryBot: Nigel Tao <nigeltao@golang.org>
Reviewed-by: Nigel Tao <nigeltao@golang.org>
The exclusion of string from IsScanValue prevents driver authors from
writing their drivers in such a way that would allow users to
distinguish between strings and byte arrays returned from a database.
Such drivers are possible today, but require their authors to deviate
from the guidance provided by the standard library.
This exclusion has been in place since the birth of this package in
https://github.com/golang/go/commit/357f2cb1a385f4d1418e48856f9abe0cce,
but the fakedb implementation shipped in the same commit violates the
exclusion!
Strictly speaking this is a breaking change, but it increases the set
of permissible Scan types, and should not cause breakage in practice.
No test changes are necessary because fakedb already exercises this.
Fixes#6497.
Change-Id: I69dbd3a59d90464bcae8c852d7ec6c97bfd120f8
Reviewed-on: https://go-review.googlesource.com/19439
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is to support https://golang.org/cl/18057, which is going to add
Windows support to this directory. Better to write the test in Go then
to have both test.bash and test.bat.
Update #13494.
Change-Id: I4af7004416309e885049ee60b9470926282f210d
Reviewed-on: https://go-review.googlesource.com/20892
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No need to have both ops when they do the same thing.
Just declare MOVBload to zero extend and we can get rid
of MOVBQZXload. Same for W and L.
Kind of a followon cleanup for https://go-review.googlesource.com/c/19506/
Should enable an easier fix for #14920
Change-Id: I7cfac909a8ba387f433a6ae75c050740ebb34d42
Reviewed-on: https://go-review.googlesource.com/21004
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes the rounding bug fix in math/big for issue 14651 available
to the compiler.
- changes to cmd/compile/internal/big fully automatic via script
- added test case for issue
- updated old test case with correct test data
Fixes#14651.
Change-Id: Iea37a2cd8d3a75f8c96193748b66156a987bbe40
Reviewed-on: https://go-review.googlesource.com/20818
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Shows up occassionally, especially after p = p[:8:len(p)]
Updates #14905
Change-Id: Iab35ef2eac57817e6a10c6aaeeb84709e8021641
Reviewed-on: https://go-review.googlesource.com/21025
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The matcher is responsible for sanitizing and uniquing the
test and benchmark names and thus needs to be included before the
API can be exposed.
Matching currently uses the regexp to only match the top-level
tests/benchmarks.
Support for subtest matching is for another CL.
Change-Id: I7c8464068faef7ebc179b03a7fe3d01122cc4f0b
Reviewed-on: https://go-review.googlesource.com/18897
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Escape analysis has a hard time with tree-like
structures (see #13493 and #14858).
This is unlikely to change.
As a result, when invoking a function that accepts
a **Node parameter, we usually allocate a *Node
on the heap. This happens a whole lot.
This CL changes functions from taking a **Node
to acting more like append: It both modifies
the input and returns a replacement for it.
Because of the cascading nature of escape analysis,
in order to get the benefits, I had to modify
almost all such functions. The remaining functions
are in racewalk and the backend. I would be happy
to update them as well in a separate CL.
This CL was created by manually updating the
function signatures and the directly impacted
bits of code. The callsites were then automatically
updated using a bespoke script:
https://gist.github.com/josharian/046b1be7aceae244de39
For ease of reviewing and future understanding,
this CL is also broken down into four CLs,
mailed separately, which show the manual
and the automated changes separately.
They are CLs 20990, 20991, 20992, and 20993.
Passes toolstash -cmp.
name old time/op new time/op delta
Template 335ms ± 5% 324ms ± 5% -3.35% (p=0.000 n=23+24)
Unicode 176ms ± 9% 165ms ± 6% -6.12% (p=0.000 n=23+24)
GoTypes 1.10s ± 4% 1.07s ± 2% -2.77% (p=0.000 n=24+24)
Compiler 5.31s ± 3% 5.15s ± 3% -2.95% (p=0.000 n=24+24)
MakeBash 41.6s ± 1% 41.7s ± 2% ~ (p=0.586 n=23+23)
name old alloc/op new alloc/op delta
Template 63.3MB ± 0% 62.4MB ± 0% -1.36% (p=0.000 n=25+23)
Unicode 42.4MB ± 0% 41.6MB ± 0% -1.99% (p=0.000 n=24+25)
GoTypes 220MB ± 0% 217MB ± 0% -1.11% (p=0.000 n=25+25)
Compiler 994MB ± 0% 973MB ± 0% -2.08% (p=0.000 n=24+25)
name old allocs/op new allocs/op delta
Template 681k ± 0% 574k ± 0% -15.71% (p=0.000 n=24+25)
Unicode 518k ± 0% 413k ± 0% -20.34% (p=0.000 n=25+24)
GoTypes 2.08M ± 0% 1.78M ± 0% -14.62% (p=0.000 n=25+25)
Compiler 9.26M ± 0% 7.64M ± 0% -17.48% (p=0.000 n=25+25)
name old text-bytes new text-bytes delta
HelloSize 578k ± 0% 578k ± 0% ~ (all samples are equal)
CmdGoSize 6.46M ± 0% 6.46M ± 0% ~ (all samples are equal)
name old data-bytes new data-bytes delta
HelloSize 128k ± 0% 128k ± 0% ~ (all samples are equal)
CmdGoSize 281k ± 0% 281k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 921k ± 0% 921k ± 0% ~ (all samples are equal)
CmdGoSize 9.86M ± 0% 9.86M ± 0% ~ (all samples are equal)
Change-Id: I277d95bd56d51c166ef7f560647aeaa092f3f475
Reviewed-on: https://go-review.googlesource.com/20959
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These new methods help find the compilation unit to pass to the
LineReader method in order to find the line information for a PC.
The Ranges method also helps identify the specific function for a PC,
needed to determine the function name.
This uses the .debug.ranges section if necessary, and changes the object
file format packages to pass in the section contents if available.
Change-Id: I5ebc3d27faaf1a126ffb17a1e6027efdf64af836
Reviewed-on: https://go-review.googlesource.com/20769
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
