go/doc/go_spec.txt

The Go Programming Language Specification (DRAFT)
----

Robert Griesemer, Rob Pike, Ken Thompson

(February 11, 2009)

----

This document is a semi-formal specification of the Go systems
programming language.

<font color=red>
This document is not ready for external review, it is under active development.
Any part may change substantially as design progresses.
</font>

----

<!--
Biggest open issues:
[ ] Conversions:
	- current situation is messy
	- 2 (3?) different notations for the same thing
	- unclear when a type guard is needed
	- unclear where conversions can be applied
	- for type T int; can we say T(3.0) ?
	- do we need channel conversion (channel direction)
[ ] Semantics of type declaration:
	- creating a new type (status quo), or only a new type name?
	- also: declaration type T S; strips methods of S. why/why not?


Decisions in need of integration into the doc:
[ ] pair assignment is required to get map, and receive ok.
[ ] len() returns an int, new(array_type, n) n must be an int


Todo's:
[ ] there is some funny-ness regarding ';' and empty statements and label decls
[ ] document illegality of package-external tuple assignments to structs
	w/ private fields: P.T{1, 2} illegal since same as P.T{a: 1, b: 2} for
	a T struct { a b int }.
[ ] clarification on interface types, rules
[ ] clarify tuples
[ ] need to talk about precise int/floats clearly
[ ] iant suggests to use abstract/precise int for len(), cap() - good idea
    (issue: what happens in len() + const - what is the type?)
[ ] cleanup convert() vs T() vs x.(T) - convert() should go away?
[ ] fix "else" part of if statement
[ ] cleanup: 6g allows: interface { f F } where F is a function type.
	fine, but then we should also allow: func f F {}, where F is a function type.


Wish list:
[ ] enum facility (enum symbols that are not mixable with ints) or some other
	mechanism to obtain type-safety which we don't have with int-only tags
[ ] Gri: built-in assert() - alternatively: allow entire expressions
	as statements so we can write: some_condition || panic(); (along these lines)
[ ] Helper syntax for composite types: allow names/keys/indices for
	structs/maps/arrays, remove need for type in elements of composites


Smaller issues:
[ ] need for type switch? (or use type guard with ok in tuple assignment?)
[ ] Is . import implemented / do we still need it?
[ ] Do we allow empty statements? If so, do we allow empty statements after a label?
    and if so, does a label followed by an empty statement (a semicolon) still denote
	a for loop that is following, and can break L be used inside it?
[ ] Russ: If we use x.(T) for all conversions, we could use T() for "construction"
    and type literals - would resolve the parsing ambiguity of T{} in if's
	


Closed:
[x] Russ: consider re-introducing "func" for function type. Make function literals
	behave like slices, etc. Require no &'s to get a function value (solves issue
	of func{} vs &func{} vs &func_name).
[x] onreturn/undo statement - now: defer statement
[x] comparison of non-basic types: what do we allow? what do we allow in interfaces
	what about maps (require ==, copy and hash)
	maybe: no maps with non-basic type keys, and no interface comparison unless
	with nil[x]
[x] clarify slice rules
[x] what are the permissible ranges for the indices in slices? The spec
	doesn't correspond to the implementation. The spec is wrong when it
	comes to the first index i: it should allow (at least) the range 0 <= i <= len(a).
	also: document different semantics for strings and arrays (strings cannot be grown).
[x] reopening & and func issue: Seems inconsistent as both &func(){} and func(){} are
    permitted. Suggestion: func literals are pointers. We need to use & for all other
	functions. This would be in consistency with the declaration of function pointer
	variables and the use of '&' to convert methods into function pointers.
	- covered by other entry
[x] composite types should uniformly create an instance instead of a pointer - fixed
[x] like to have assert() in the language, w/ option to disable code gen for it
	- added to wish list
[x] convert should not be used for composite literals anymore,
	in fact, convert() should go away - made a todo
[x] type switch or some form of type test needed - duplicate entry
[x] provide composite literal notation to address array indices: []int{ 0: x1, 1: x2, ... }
    and struct field names (both seem easy to do). - under "Missing" list
[x] passing a "..." arg to another "..." parameter doesn't wrap the argument again
	(so "..." args can be passed down easily) - this is documented
[x] consider syntactic notation for composite literals to make them parseable w/o type information
	(require ()'s in control clauses) - use heuristics for now
[x] do we need anything on package vs file names? - current package scheme workable for now
[x] what is the meaning of typeof() - we don't have it
[x] old-style export decls (still needed, but ideally should go away)
[x] packages of multiple files - we have a working approach
[x] partial export of structs, methods
[x] new as it is now is weird - need to go back to previous semantics and introduce
    literals for slices, maps, channels - done
[x] determine if really necessary to disallow array assignment - allow array assignment
[x] semantics of statements - we just need to fill in the language, the semantics is mostly clear
[x] range statement: to be defined more reasonably
[x] need to be specific on (unsigned) integer operations: one must be able
	to rely on wrap-around on overflow
[x] global var decls: "var a, b, c int = 0, 0, 0" is ok, but "var a, b, c = 0, 0, 0" is not
	(seems inconsistent with "var a = 0", and ":=" notation)
[x] const decls: "const a, b = 1, 2" is not allowed - why not? Should be symmetric to vars.
[x] new(arraytype, n1, n2): spec only talks about length, not capacity
    (should only use new(arraytype, n) - this will allow later
	 extension to multi-dim arrays w/o breaking the language) - documented
[x] should we have a shorter list of alias types? (byte, int, uint, float) - done
[x] reflection support
[x] syntax for var args
[x] Do composite literals create a new literal each time (gri thinks yes) (Russ is putting in a change
    to this effect, essentially)
[x] comparison operators: can we compare interfaces?
[x] can we add methods to types defined in another package? (probably not)
[x] optional semicolons: too complicated and unclear
[x] anonymous types are written using a type name, which can be a qualified identifier.
    this might be a problem when referring to such a field using the type name.
[x] nil and interfaces - can we test for nil, what does it mean, etc.
[x] talk about underflow/overflow of 2's complement numbers (defined vs not defined).
[x] change wording on array composite literals: the types are always fixed arrays
    for array composites
[x] meaning of nil
[x] remove "any"
[x] methods for all types
[x] should binary <- be at lowest precedence level? when is a send/receive non-blocking? (NO - 9/19/08)
[x] func literal like a composite type - should probably require the '&' to get address (NO)
[x] & needed to get a function pointer from a function? (NO - there is the "func" keyword - 9/19/08)

Timeline (9/5/08):
- threads: 1 month
- reflection code: 2 months
- proto buf support: 3 months
- GC: 6 months
- debugger
- Jan 1, 2009: enough support to write interesting programs
-->


Contents
----

	Introduction
		Guiding principles
		Program structure
		Modularity, identifiers and scopes
		Typing, polymorphism, and object-orientation
		Pointers and garbage collection
		Values and references
		Multithreading and channels

	Notation

	Source code representation
		Characters
		Letters and digits

	Vocabulary
		Identifiers
		Numeric literals
		Character and string literals
		Operators and delimitors
		Reserved words

	Declarations and scope rules
		Predeclared identifiers
		Exported identifiers
		Const declarations
			Iota
		Type declarations
		Variable declarations

	Types
		Basic types
			Arithmetic types
			Booleans
			Strings
		Array types
		Struct types
		Pointer types
		Function types
		Interface types
		Slice types
		Map types
		Channel types
		Type equality

	Expressions
		Operands
			Constants
			Qualified identifiers
			Composite literals
			Function literals

		Primary expressions
			Selectors
			Indexes
			Slices
			Type guards
			Calls
				Parameter passing

		Operators
			Arithmetic operators
				Integer overflow
			Comparison operators
			Logical operators
			Address operators
			Communication operators

		Constant expressions

	Statements
		Label declarations
		Expression statements
		IncDec statements
		Assignments
		If statements
		Switch statements
		For statements
		Go statements
		Select statements
		Return statements
		Break statements
		Continue statements
		Label declaration
		Goto statements
		Defer statements

	Function declarations
		Method declarations
		Predeclared functions
			Length and capacity
			Conversions
			Allocation
			Making slices, maps, and channels

	Packages

	Program initialization and execution

	Systems considerations
		Package unsafe
		Size and alignment guarantees


----

Introduction
----

Go is a new systems programming language intended as an alternative to C++ at
Google. Its main purpose is to provide a productive and efficient programming
environment for compiled programs such as servers and distributed systems.


Guiding principles
----

The design of Go is motivated by the following goals (in no particular order):

- very fast compilation, instantaneous incremental compilation
- strongly typed
- procedural
- concise syntax avoiding repetition
- few, orthogonal, and general concepts
- support for threading and interprocess communication
- garbage collection
- container library written in Go
- efficient code, comparable to other compiled languages


Program structure
----

A Go program consists of a number of ``packages''.

A package is built from one or more source files, each of which consists
of a package specifier followed by declarations. There are no statements at
the top level of a file.

By convention, the package called "main" is the starting point for execution.
It contains a function, also called "main", that is the first function invoked
by the run time system after initialization (if a source file within the program
contains a function "init()", that function will be executed before "main.main()"
is called).

Source files can be compiled separately (without the source code of packages
they depend on), but not independently (the compiler does check dependencies
by consulting the symbol information in compiled packages).


Modularity, identifiers and scopes
----

A package is a collection of import, constant, type, variable, and function
declarations. Each declaration binds an ``identifier'' with a program entity
(such as a variable).

In particular, all identifiers occurring in a package are either declared
explicitly within the package, arise from an import declaration, or belong
to a small set of predeclared identifiers (such as "string").

Scoping follows the usual rules: The scope of an identifier declared within
a ``block'' generally extends from the declaration of the identifier to the
end of the block. An identifier shadows identifiers with the same name declared
in outer scopes. Within a scope, an identifier can be declared at most once.

Identifiers may be ``internal'' or ``exported''. Internal identifiers are only
accessible to files belonging to the package in which they are declared.
External identifiers are accessible to other packages.


Typing, polymorphism, and object-orientation
----

Go programs are strongly typed. Certain variables may be polymorphic.
The language provides mechanisms to make use of such polymorphic variables
type-safe.

Object-oriented programming is supported by interface types.
Different interface types are independent of each
other and no explicit hierarchy is required (such as single or
multiple inheritance explicitly specified through respective type
declarations).  Interface types only define a set of methods that a
corresponding implementation must provide.  Thus interface and
implementation are strictly separated.

An interface is implemented by associating methods with types. If a type
defines all methods of an interface, it implements that interface and thus
can be used where that interface is required. Unless used through a variable
of interface type, methods can always be statically bound (they are not
``virtual''), and invoking them incurs no extra run-time overhead compared
to ordinary functions.

Go has no explicit notion of classes, sub-classes, or inheritance.
These concepts are trivially modeled in Go through the use of
functions, structures, embedding of types, associated methods, and interfaces.

Go has no explicit notion of type parameters or templates.  Instead,
containers (such as stacks, lists, etc.) are implemented through the
use of abstract operations on interface types.


Pointers and garbage collection
----

Variables may be allocated automatically (when entering the scope of
the variable) or explicitly on the heap.  Pointers are used to refer
to heap-allocated variables.  Pointers may also be used to point to
any other variable; such a pointer is obtained by "taking the
address" of that variable.  Variables are automatically reclaimed when
they are no longer accessible.  There is no pointer arithmetic in Go.


Values and references
----

Most data types have value semantics, but their contents may be accessed
through different pointers referring to the same object. However, some
data types have reference semantics to facilitate common usage patterns
and implementation.

For example, when calling a function with a struct, the struct is passed
by value, possibly by making a copy. To pass a reference, one must explicitly
pass a pointer to the struct. On the other hand, when calling a function with
a map, a reference to the map is passed implicitly without the need to pass a
pointer to the map; thus the map contents are not copied when a map is assigned
to a variable.


Multithreading and channels
----

Go supports multithreaded programming directly. A function may
be invoked as a parallel thread of execution.  Communication and
synchronization are provided through channels and their associated
language support.


----

Notation
----

The syntax is specified using Extended Backus-Naur Form (EBNF):

	Production = production_name "=" Expression .
	Expression = Alternative { "|" Alternative } .
	Alternative = Term { Term } .
	Term = production_name | token [ "..." token ] | Group | Option | Repetition .
	Group = "(" Expression ")" .
	Option = "[" Expression ")" .
	Repetition = "{" Expression "}" .

Productions are expressions constructed from terms and the following operators:

	|   separates alternatives (least binding strength)
	()  groups
	[]  specifies an option (0 or 1 times)
	{}  specifies repetition (0 to n times)

Lower-case production names are used to identify productions that cannot
be broken by white space or comments; they are tokens. Other production
names are in CamelCase.

Tokens (lexical symbols) are enclosed in double quotes '''' (the
double quote symbol is written as ''"'').

The form "a ... b" represents the set of characters from "a" through "b" as
alternatives.

Where possible, recursive productions are used to express evaluation order
and operator precedence syntactically (for instance for expressions).

A production may be referenced from various places in this document
but is usually defined close to its first use.  Productions and code
examples are indented.

----

Source code representation
----

Source code is Unicode text encoded in UTF-8.

Tokenization follows the usual rules.  Source text is case-sensitive.

White space is blanks, newlines, carriage returns, or tabs.

Comments are // to end of line or /* */ without nesting and are treated as white space.

Some Unicode characters (e.g., the character U+00E4) may be representable in
two forms, as a single code point or as two code points.  For simplicity of
implementation, Go treats these as distinct characters: each Unicode code
point is a single character in Go.


Characters
----

The following terms are used to denote specific Unicode character classes:

	unicode_char      an arbitrary Unicode code point
	unicode_letter    a Unicode code point classified as "Letter"
	capital_letter    a Unicode code point classified as "Letter, uppercase"

(The Unicode Standard, Section 4.5 General Category - Normative.)


Letters and digits
----

	letter        = unicode_letter | "_" .
	decimal_digit = "0" ... "9" .
	octal_digit   = "0" ... "7" .
	hex_digit     = "0" ... "9" | "A" ... "F" | "a" ... "f" .


----

Vocabulary
----

Tokens make up the vocabulary of the Go language. They consist of
identifiers, numbers, strings, operators, and delimitors.


Identifiers
----

An identifier is a name for a program entity such as a variable, a
type, a function, etc.

	identifier = letter { letter | decimal_digit } .

Exported identifiers (§Exported identifiers) start with a capital_letter.

	a
	_x9
	ThisVariableIsExported
	αβ

Some identifiers are predeclared (§Predeclared identifiers).


Numeric literals
----

An integer literal represents a mathematically ideal integer constant
of arbitrary precision, or 'ideal int'.

	int_lit     = decimal_int | octal_int | hex_int .
	decimal_int = ( "1" ... "9" ) { decimal_digit } .
	octal_int   = "0" { octal_digit } .
	hex_int     = "0" ( "x" | "X" ) hex_digit { hex_digit } .

	42
	0600
	0xBadFace
	170141183460469231731687303715884105727

A floating point literal represents a mathematically ideal floating point
constant of arbitrary precision, or 'ideal float'.

	float_lit =
		decimals "." [ decimals ] [ exponent ] |
		decimals exponent |
		"." decimals [ exponent ] .
	decimals = decimal_digit { decimal_digit } .
	exponent = ( "e" | "E" ) [ "+" | "-" ] decimals .

	0.
	2.71828
	1.e+0
	6.67428e-11
	1E6
	.25
	.12345E+5

Numeric literals are unsigned. A negative constant is formed by
applying the unary prefix operator "-" (§Arithmetic operators).

An 'ideal number' is either an 'ideal int' or an 'ideal float'.

Only when an ideal number (or an arithmetic expression formed
solely from ideal numbers) is bound to a variable or used in an expression
or constant of fixed-size integers or floats it is required to fit
a particular size.  In other words, ideal numbers and arithmetic
upon them are not subject to overflow; only use of them in assignments
or expressions involving fixed-size numbers may cause overflow, and thus
an error (§Expressions).

Implementation restriction: A compiler may implement ideal numbers
by choosing a "sufficiently large" internal representation of such
numbers.


Character and string literals
----

Character and string literals are almost the same as in C, with the
following differences:

	- The encoding is UTF-8
	- `` strings exist; they do not interpret backslashes
	- Octal character escapes are always 3 digits ("\077" not "\77")
	- Hexadecimal character escapes are always 2 digits ("\x07" not "\x7")

The rules are:

	char_lit = "'" ( unicode_value | byte_value ) "'" .
	unicode_value = unicode_char | little_u_value | big_u_value | escaped_char .
	byte_value = octal_byte_value | hex_byte_value .
	octal_byte_value = "\" octal_digit octal_digit octal_digit .
	hex_byte_value = "\" "x" hex_digit hex_digit .
	little_u_value = "\" "u" hex_digit hex_digit hex_digit hex_digit .
	big_u_value =
		"\" "U" hex_digit hex_digit hex_digit hex_digit
		hex_digit hex_digit hex_digit hex_digit .
	escaped_char = "\" ( "a" | "b" | "f" | "n" | "r" | "t" | "v" | "\" | "'" | """ ) .

A unicode_value takes one of four forms:

* The UTF-8 encoding of a Unicode code point.  Since Go source
text is in UTF-8, this is the obvious translation from input
text into Unicode characters.
* The usual list of C backslash escapes: "\n", "\t", etc.
Within a character or string literal, only the corresponding quote character
is a legal escape (this is not explicitly reflected in the above syntax).
* A `little u' value, such as "\u12AB".  This represents the Unicode
code point with the corresponding hexadecimal value.  It always
has exactly 4 hexadecimal digits.
* A `big U' value, such as "\U00101234".  This represents the
Unicode code point with the corresponding hexadecimal value.
It always has exactly 8 hexadecimal digits.

Some values that can be represented this way are illegal because they
are not valid Unicode code points.  These include values above
0x10FFFF and surrogate halves.

An octal_byte_value contains three octal digits.  A hex_byte_value
contains two hexadecimal digits.  (Note: This differs from C but is
simpler.)

It is erroneous for an octal_byte_value to represent a value larger than 255. 
(By construction, a hex_byte_value cannot.)

A character literal is a form of unsigned integer constant.  Its value
is that of the Unicode code point represented by the text between the
quotes.

	'a'
	'ä'
	'本'
	'\t'
	'\000'
	'\007'
	'\377'
	'\x07'
	'\xff'
	'\u12e4'
	'\U00101234'

String literals come in two forms: double-quoted and back-quoted.
Double-quoted strings have the usual properties; back-quoted strings
do not interpret backslashes at all.

	string_lit = raw_string_lit | interpreted_string_lit .
	raw_string_lit = "`" { unicode_char } "`" .
	interpreted_string_lit = """ { unicode_value | byte_value } """ .

A string literal has type "string" (§Strings).  Its value is constructed
by taking the byte values formed by the successive elements of the
literal.  For byte_values, these are the literal bytes; for
unicode_values, these are the bytes of the UTF-8 encoding of the
corresponding Unicode code points.  Note that
	"\u00FF"
and
	"\xFF"
are
different strings: the first contains the two-byte UTF-8 expansion of
the value 255, while the second contains a single byte of value 255.
The same rules apply to raw string literals, except the contents are
uninterpreted UTF-8.

	`abc`
	`\n`
	"hello, world\n"
	"\n"
	""
	"Hello, world!\n"
	"日本語"
	"\u65e5本\U00008a9e"
	"\xff\u00FF"

These examples all represent the same string:

	"日本語"  // UTF-8 input text
	`日本語`  // UTF-8 input text as a raw literal
	"\u65e5\u672c\u8a9e"  // The explicit Unicode code points
	"\U000065e5\U0000672c\U00008a9e"  // The explicit Unicode code points
	"\xe6\x97\xa5\xe6\x9c\xac\xe8\xaa\x9e"  // The explicit UTF-8 bytes

Adjacent strings separated only by whitespace (including comments)
are concatenated into a single string. The following two lines
represent the same string:

	"Alea iacta est."
	"Alea " /* The die */ `iacta est` /* is cast */ "."

The language does not canonicalize Unicode text or evaluate combining
forms.  The text of source code is passed uninterpreted.

If the source code represents a character as two code points, such as
a combining form involving an accent and a letter, the result will be
an error if placed in a character literal (it is not a single code
point), and will appear as two code points if placed in a string
literal.


Operators and delimitors
----

The following special character sequences serve as operators or delimitors:

	+    &     +=    &=     &&    ==    !=    (    )
	-    |     -=    |=     ||    <     <=    [    ]
	*    ^     *=    ^=     <-    >     >=    {    }
	/    <<    /=    <<=    ++    =     :=    ,    ;
	%    >>    %=    >>=    --    !     ...   .    :


Reserved words
----

The following words are reserved and must not be used as identifiers:

	break        default      func         interface    select
	case         defer        go           map          struct
	chan         else         goto         package      switch
	const        fallthrough  if           range        type
	continue     for          import       return       var


----

Declarations and scope rules
----

A declaration ``binds'' an identifier to a language entity (such as
a package, constant, type, struct field, variable, parameter, result,
function, method) and specifies properties of that entity such as its type.

	Declaration = ConstDecl | TypeDecl | VarDecl | FunctionDecl | MethodDecl .
		
Every identifier in a program must be declared; some identifiers, such as "int"
and "true", are predeclared (§Predeclared identifiers).

The ``scope'' of an identifier is the extent of source text within which the
identifier denotes the bound entity. No identifier may be declared twice in a
single scope. Go is lexically scoped: An identifier denotes the entity it is
bound to only within the scope of the identifier.

For instance, for a variable named "x", the scope of identifier "x" is the
extent of source text within which "x" denotes that particular variable.
It is illegal to declare another identifier "x" within the same scope.

The scope of an identifier depends on the entity declared. The scope for
an identifier always excludes scopes redeclaring the identifier in nested
blocks. An identifier declared in a nested block is said to ``shadow'' the
same identifier declared in an outer block.

	1. The scope of predeclared identifiers is the entire source file.

	2. The scope of an identifier denoting a type, function or package
	   extends textually from the point of the identifier in the declaration
	   to the end of the innermost surrounding block.

	3. The scope of a constant or variable extends textually from
	   after the declaration to the end of the innermost surrounding
	   block. If the variable is declared in the init statement of an
	   if, for, or switch statement, the innermost surrounding block
	   is the block associated with the respective statement.

	4. The scope of a parameter or result identifier is the body of the
	   corresponding function.

	5. The scope of a field or method identifier is selectors for the
	   corresponding type containing the field or method (§Selectors).
	   
	6. The scope of a label is the body of the innermost surrounding
	   function and does not intersect with any non-label scope. Thus,
	   each function has its own private label scope.


Predeclared identifiers
----

The following identifiers are predeclared:

All basic types:

	bool, byte, uint8, uint16, uint32, uint64, int8, int16, int32, int64,
	float32, float64, string
	
A set of platform-specific convenience types:

	uint, int, float, uintptr
	
The predeclared constants:

	true, false, iota, nil
	
The predeclared functions (note: this list is likely to change):

	cap(), convert(), len(), make(), new(), panic(), panicln(), print(), println(), typeof(), ...


Exported identifiers
----

Identifiers that start with a capital_letter (§Identifiers) are ``exported'',
thus making the identifiers accessible outside the current package. A file
belonging to another package may then import the package (§Packages) and access
exported identifiers via qualified identifiers (§Qualified identifiers).

All other identifiers are ``internal''; they are only visible in files
belonging to the same package which declares them.

TODO: This should be made clearer. For instance, function-local identifiers
are never exported, but non-global fields/methods may be exported.


Const declarations
----

A constant declaration binds an identifier to the value of a constant
expression (§Constant expressions).

	ConstDecl = "const" ( ConstSpec | "(" [ ConstSpecList ] ")" ) .
	ConstSpecList = ConstSpec { ";" ConstSpec } [ ";" ] .
	ConstSpec = IdentifierList [ CompleteType ] [ "=" ExpressionList ] .

	IdentifierList = identifier { "," identifier } .
	ExpressionList = Expression { "," Expression } .

A constant declaration binds a list of identifiers (the names of the constants)
to the values of a list of constant expressions. The number of identifiers must 
be equal to the number of expressions, with the i'th identifier on the left
corresponding to the i'th expression on the right. If CompleteType is omitted,
the types of the constants are the types of the corresponding expressions;
different expressions may have different types. If CompleteType is present,
the type of all constants is the type specified, and the types of all
expressions in ExpressionList must be assignment-compatible with the
constant type.

	const Pi float64 = 3.14159265358979323846
	const E = 2.718281828
	const (
		size int64 = 1024;
		eof = -1;
	)
	const a, b, c = 3, 4, "foo"  // a = 3, b = 4, c = "foo"
	const u, v float = 0, 3      // u = 0.0, v = 3.0

As a special case, within a parenthesized "const" declaration list the
ExpressionList may be omitted from any but the first declaration. Such an empty
ExpressionList is equivalent to the textual substitution of the first preceding
non-empty ExpressionList in the same "const" declaration list.
That is, omitting the list of expressions is equivalent to repeating the
previous list. The number of identifiers must be equal to the number of
expressions in the previous list.

Together with the "iota" constant generator implicit repetition of
ExpressionLists permit light-weight declaration of enumerated values (§Iota):

	const (
		Sunday = iota;
		Monday;
		Tuesday;
		Wednesday;
		Thursday;
		Friday;
		Partyday;
		numberOfDays;  // this constant in not exported
	)

The initializing expression for a numeric constant is evaluated
using the principles described in the section on numeric literals:
constants are mathematical values given a size only upon assignment
to a variable.  Intermediate values, and the constants themselves,
may require precision significantly larger than any concrete type
in the language.  Thus the following is legal:

	const Huge = 1 << 100;
	const Four int8 = Huge >> 98;

A given numeric constant expression is, however, defined to be
either an integer or a floating point value, depending on the syntax
of the literals it comprises (123 vs. 1.0e4).  This is because the
nature of the arithmetic operations depends on the type of the
values; for example, 3/2 is an integer division yielding 1, while
3./2. is a floating point division yielding 1.5.  Thus

	const x = 3./2. + 3/2;

yields a floating point constant of value 2.5 (1.5 + 1); its
constituent expressions are evaluated using different rules for
division.

If the type is missing from a numeric constant declaration, the constant
represents a value of abitrary precision, either integer or floating
point, determined by the type of the initializing expression. Such
a constant may be assigned to any variable that can represent its
value accurately, regardless of type.  For instance, 3 can be
assigned to any integer variable but also to any floating point variable,
while 1e12 can be assigned to a "float32", "float64", or even "int64".
It is erroneous to assign a value with a non-zero fractional part
to an integer, or if the assignment would overflow or underflow.


Iota
----

Within a constant declaration, the predeclared operand "iota" represents
successive elements of an integer sequence. It is reset to 0 whenever the
reserved word "const" appears in the source and increments with each
semicolon. For instance, "iota" can be used to construct a set of related
constants:

	const (            // iota is set to 0
		enum0 = iota;  // sets enum0 to 0, etc.
		enum1 = iota;
		enum2 = iota
	)

	const (
		a = 1 << iota;  // a == 1 (iota has been reset)
		b = 1 << iota;  // b == 2
		c = 1 << iota;  // c == 4
	)

	const (
		u       = iota * 42;  // u == 0     (ideal integer)
		v float = iota * 42;  // v == 42.0  (float)
		w       = iota * 42;  // w == 84    (ideal integer)
	)

	const x = iota;  // x == 0 (iota has been reset)
	const y = iota;  // y == 0 (iota has been reset)

Within an ExpressionList, the value of all "iota"'s is the same because "iota"
is only incremented at each semicolon:

	const (
		base0, mask0 int64 = 1 << iota, i << iota - 1;  // base0 == 1, mask0 = 0
		base1, mask1 int64 = 1 << iota, i << iota - 1;  // base1 == 2, mask1 = 1
		base2, mask2 int64 = 1 << iota, i << iota - 1;  // base2 == 4, mask2 = 3
	)

Since the ExpressionList in constant declarations repeats implicitly
if omitted, some of the examples above can be abbreviated:

	const (
		enum0 = iota;
		enum1;
		enum2
	)

	const (
		a = 1 << iota;
		b;
		c;
	)

	const (
		u = iota * 42;
		v float;
		w;
	)

	const (
		base0, mask0 int64 = 1 << iota, i << iota - 1;
		base1, mask1 int64;
		base2, mask2 int64;
	)


Type declarations
----

A type declaration specifies a new type and binds an identifier to it.
The identifier is called the ``type name''; it denotes the type.

	TypeDecl = "type" ( TypeSpec | "(" [ TypeSpecList ] ")" ) .
	TypeSpecList = TypeSpec { ";" TypeSpec } [ ";" ] .
	TypeSpec = identifier Type .

A struct or interface type may be forward-declared (§Struct types,
§Interface types). A forward-declared type is incomplete (§Types)
until it is fully declared. The full declaration must must follow
within the same block containing the forward declaration.

	type IntArray [16] int

	type (
		Point struct { x, y float };
		Polar Point
	)

	type TreeNode struct {
		left, right *TreeNode;
		value Point;
	}
	
	type Comparable interface {
		cmp(Comparable) int
	}


Variable declarations
----

A variable declaration creates a variable, binds an identifier to it and
gives it a type. It may optionally give the variable an initial value.
The variable type must be a complete type (§Types).
In some forms of declaration the type of the initial value defines the type
of the variable.

	VarDecl = "var" ( VarSpec | "(" [ VarSpecList ] ")" ) .
	VarSpecList = VarSpec { ";" VarSpec } [ ";" ] .
	VarSpec = IdentifierList ( CompleteType [ "=" ExpressionList ] | "=" ExpressionList ) .

	var i int
	var U, V, W float
	var k = 0
	var x, y float = -1.0, -2.0
	var (
		i int;
		u, v, s = 2.0, 3.0, "bar"
	)

If the expression list is present, it must have the same number of elements
as there are variables in the variable specification.

If the variable type is omitted, an initialization expression (or expression
list) must be present, and the variable type is the type of the expression
value (in case of a list of variables, the variables assume the types of the
corresponding expression values).

If the variable type is omitted, and the corresponding initialization expression
is a constant expression of abstract int or floating point type, the type
of the variable is "int" or "float" respectively:

	var i = 0       // i has int type
	var f = 3.1415  // f has float type

The syntax

	SimpleVarDecl = IdentifierList ":=" ExpressionList .

is shorthand for

	"var" IdentifierList = ExpressionList .

	i, j := 0, 10;
	f := func() int { return 7; }
	ch := new(chan int);
	
Also, in some contexts such as "if", "for", or "switch" statements,
this construct can be used to declare local temporary variables.


----

Types
----

A type specifies the set of values that variables of that type may assume
and the operators that are applicable.

A type may be specified by a type name (§Type declarations) or a type literal.
A type literal is a syntactic construct that explicitly specifies the
composition of a new type in terms of other (already declared) types.

	Type = TypeName | TypeLit .
	TypeName = QualifiedIdent.
	TypeLit =
		ArrayType | StructType | PointerType | FunctionType | InterfaceType |
		SliceType | MapType | ChannelType .

Some types are predeclared and denoted by their type names; these are called
``basic types''. Generally (except for strings) they are not composed of more
elementary types; instead they model elementary machine data types.

All other types are called ``composite types'; they are composed from other
(basic or composite) types and denoted by their type names or by type literals.
There are arrays, structs, pointers, functions, interfaces, slices, maps, and
channels.

At a given point in the source code, a type may be ``complete'' or
''incomplete''. Array and struct types are complete when they are fully declared.
All other types are always complete (although their components, such as the base
type of a pointer type, may be incomplete). Incomplete types are subject to usage
restrictions; for instance the type of a variable must be complete where the
variable is declared.

	CompleteType = Type .

The ``interface'' of a type is the set of methods bound to it
(§Method declarations). The interface of a pointer type is the interface
of the pointer base type (§Pointer types). All types have an interface;
if they have no methods associated with them, their interface is
called the ``empty'' interface.

The ``static type'' (or simply ``type'') of a variable is the type defined by
the variable's declaration. The ``dynamic type'' of a variable is the actual
type of the value stored in a variable at run-time. Except for variables of
interface type, the dynamic type of a variable is always its static type.

Variables of interface type may hold values with different dynamic types
during execution. However, its dynamic type is always compatible with
the static type of the interface variable (§Interface types).
	

Basic types
----

Go defines a number of basic types, referred to by their predeclared
type names.  These include traditional arithmetic types, booleans,
and strings.


Arithmetic types
----

The following list enumerates all platform-independent numeric types:

	byte     same as uint8 (for convenience)

	uint8    the set of all unsigned  8-bit integers (0 to 255)
	uint16   the set of all unsigned 16-bit integers (0 to 65535)
	uint32   the set of all unsigned 32-bit integers (0 to 4294967295)
	uint64   the set of all unsigned 64-bit integers (0 to 18446744073709551615)

	int8     the set of all signed  8-bit integers (-128 to 127)
	int16    the set of all signed 16-bit integers (-32768 to 32767)
	int32    the set of all signed 32-bit integers (-2147483648 to 2147483647)
	int64    the set of all signed 64-bit integers (-9223372036854775808 to 9223372036854775807)

	float32  the set of all valid IEEE-754 32-bit floating point numbers
	float64  the set of all valid IEEE-754 64-bit floating point numbers

Integer types are represented in the usual binary format; the value of
an n-bit integer is n bits wide. A negative signed integer is represented
as the two's complement of its absolute value.

<!--
The representation of signed integers and their exact range is
implementation-specific, but the set of all positive values (including zero)
of a signed integer type is always a subset of the corresponding unsigned
integer type (thus, a positive signed integer can always be converted into
its corresponding unsigned type without loss).
-->

Additionally, Go declares a set of platform-specific numeric types for
convenience:

	uint     at least 32 bits, at most the size of the largest uint type
	int      at least 32 bits, at most the size of the largest int type
	float    at least 32 bits, at most the size of the largest float type
	uintptr  smallest uint type large enough to store the uninterpreted
	         bits of a pointer value

For instance, int might have the same size as int32 on a 32-bit
architecture, or int64 on a 64-bit architecture.

Except for "byte", which is an alias for "uint8", all numeric types
are different from each other to avoid portability issues. Conversions
are required when different numeric types are mixed in an expression or assignment.
For instance, "int32" and "int" are not the same type even though they may have
the same size on a particular platform.


Booleans
----

The type "bool" comprises the truth values true and false, which are
available through the two predeclared constants, "true" and "false".


Strings
----

The "string" type represents the set of string values (strings).
Strings behave like arrays of bytes, with the following properties:

- They are immutable: after creation, it is not possible to change the
contents of a string.
- No internal pointers: it is illegal to create a pointer to an inner
element of a string.
- They can be indexed: given string "s1", "s1[i]" is a byte value.
- They can be concatenated: given strings "s1" and "s2", "s1 + s2" is a value
combining the elements of "s1" and "s2" in sequence.
- Known length: the length of a string "s1" can be obtained by calling
"len(s1)".  The length of a string is the number
of bytes within. Unlike in C, there is no terminal NUL byte.
- Creation 1: a string can be created from an integer value by a conversion;
the result is a string containing the UTF-8 encoding of that code point
(§Conversions).
"string('x')" yields "x"; "string(0x1234)" yields the equivalent of "\u1234"

- Creation 2: a string can by created from an array of integer values (maybe
just array of bytes) by a conversion (§Conversions):

	a [3]byte; a[0] = 'a'; a[1] = 'b'; a[2] = 'c';  string(a) == "abc";


Array types
----

An array is a composite type consisting of a number of elements all of the
same type, called the element type. The element type must be a complete type
(§Types). The number of elements of an array is called its length; it is never
negative. The elements of an array are designated by indices
which are integers from 0 through the length - 1.

	ArrayType = "[" ArrayLength "]" ElementType .
	ArrayLength = Expression .
	ElementType = CompleteType .

The array length and its value are part of the array type. The array length
must be a constant expression (§Constant expressions) that evaluates to an
integer value >= 0.

The number of elements of an array "a" can be discovered using the built-in
function

	len(a)

The length of arrays is known at compile-time, and the result of a call to
"len(a)" is a compile-time constant.

	[32]byte
	[2*N] struct { x, y int32 }
	[1000]*float64

Assignment compatibility: Arrays can be assigned to variables of equal type
and to slice variables with equal element type. When assigning to a slice
variable, the array is not copied but a slice comprising the entire array
is created.


Struct types
----

A struct is a composite type consisting of a fixed number of elements,
called fields, with possibly different types. A struct type declares
an identifier and type for each field. Within a struct type no field
identifier may be declared twice and all field types must be complete
types (§Types).

	StructType = "struct" [ "{" [ FieldDeclList ] "}" ] .
	FieldDeclList = FieldDecl { ";" FieldDecl } [ ";" ] .
	FieldDecl = (IdentifierList CompleteType | [ "*" ] TypeName) [ Tag ] .
	Tag = StringLit .

	// An empty struct.
	struct {}

	// A struct with 5 fields.
	struct {
		x, y int;
		u float;
		A *[]int;
		F func();
	}

A struct may contain ``anonymous fields'', which are declared with a type
but no explicit field identifier. An anonymous field type must be specified as
a type name "T", or as a pointer to a type name ``*T'', and T itself may not be
a pointer or interface type. The unqualified type name acts as the field identifier.

	// A struct with four anonymous fields of type T1, *T2, P.T3 and *P.T4
	struct {
		T1;        // the field name is T1
		*T2;       // the field name is T2
		P.T3;      // the field name is the unqualified type name T3
		*P.T4;     // the field name is the unqualified type name T4
		x, y int;  
	}

The unqualified type name of an anonymous field must not conflict with the
field identifier (or unqualified type name for an anonymous field) of any
other field within the struct. The following declaration is illegal:

	struct {
		T;         // conflicts with anonymous field *T and *P.T
		*T;        // conflicts with anonymous field T and *P.T
		*P.T;      // conflicts with anonymous field T and *T
	}

Fields and methods (§Method declarations) of an anonymous field become directly
accessible as fields and methods of the struct without the need to provide the
type name of the respective anonymous field (§Selectors).

A field declaration may be followed by an optional string literal tag which
becomes an ``attribute'' for all the identifiers in the corresponding
field declaration. The tags are available via the reflection library but
are ignored otherwise. A tag may contain arbitrary application-specific
information.

	// A struct corresponding to the EventIdMessage protocol buffer.
	// The tag strings contain the protocol buffer field tags.
	struct {
		time_usec uint64 "1";
		server_ip uint32 "2";
		process_id uint32 "3";
	}

Forward declaration:
A struct type consisting of only the reserved word "struct" may be used in
a type declaration; it declares an incomplete struct type (§Type declarations).
This allows the construction of mutually recursive types such as:

	type S2 struct // forward declaration of S2
	type S1 struct { s2 *S2 }
	type S2 struct { s1 *S1 }

Assignment compatibility: Structs are assignment compatible to variables of
equal type only.


Pointer types
----

A pointer type denotes the set of all pointers to variables of a given
type, called the ``base type'' of the pointer, and the value "nil".

	PointerType = "*" BaseType .
	BaseType = Type .

	*int
	map[string] chan

The pointer base type may be denoted by an identifier referring to an
incomplete type (§Types), possibly declared via a forward declaration.
This allows the construction of recursive and mutually recursive types
such as:

	type S struct { s *S }

	type S2 struct // forward declaration of S2
	type S1 struct { s2 *S2 }
	type S2 struct { s1 *S1 }

Assignment compatibility: A pointer is assignment compatible to a variable
of pointer type, only if both types are equal.

Comparisons: A variable of pointer type can be compared against "nil" with the
operators "==" and "!=" (§Comparison operators). The variable is
"nil" only if "nil" is assigned explicitly to the variable (§Assignments), or
if the variable has not been modified since creation (§Program initialization
and execution).

Two variables of equal pointer type can be tested for equality with the
operators "==" and "!=" (§Comparison operators). The pointers are equal
if they point to the same location.

Pointer arithmetic of any kind is not permitted.


Function types
----

A function type denotes the set of all functions with the same parameter
and result types, and the value "nil".

	FunctionType = "func" Signature .
	Signature = "(" [ ParameterList ] ")" [ Result ] .
	ParameterList = ParameterDecl { "," ParameterDecl } .
	ParameterDecl = [ IdentifierList ] ( Type | "..." ) .
	Result = Type | "(" ParameterList ")" .

In ParameterList, the parameter names (IdentifierList) either must all be
present, or all be absent. If the parameters are named, each name stands
for one parameter of the specified type. If the parameters are unnamed, each
type stands for one parameter of that type.

For the last incoming parameter only, instead of a parameter type one
may write "...". The ellipsis indicates that the last parameter stands
for an arbitrary number of additional arguments of any type (including
no additional arguments). If the parameters are named, the identifier
list immediately preceding "..." must contain only one identifier (the
name of the last parameter).

	func ()
	func (x int)
	func () int
	func (string, float, ...)
	func (a, b int, z float) bool
	func (a, b int, z float) (bool)
	func (a, b int, z float, opt ...) (success bool)
	func (int, int, float) (float, *[]int)

If the result type of a function is itself a function type, the result type
must be parenthesized to resolve a parsing ambiguity:

	func (n int) (func (p* T))

Assignment compatibility: A function can be assigned to a function
variable only if both function types are equal.

Comparisons: A variable of function type can be compared against "nil" with the
operators "==" and "!=" (§Comparison operators). The variable is
"nil" only if "nil" is assigned explicitly to the variable (§Assignments), or
if the variable has not been modified since creation (§Program initialization
and execution).

Two variables of equal function type can be tested for equality with the
operators "==" and "!=" (§Comparison operators). The variables are equal
if they refer to the same function.


Interface types
----

Type interfaces may be specified explicitly by interface types.
An interface type denotes the set of all types that implement at least
the set of methods specified by the interface type, and the value "nil".

	InterfaceType = "interface" [ "{" [ MethodSpecList ] "}" ] .
	MethodSpecList = MethodSpec { ";" MethodSpec } [ ";" ] .
	MethodSpec = IdentifierList Signature | TypeName .

	// An interface specifying a basic File type.
	interface {
		Read, Write	(b Buffer) bool;
		Close		();
	}

Any type (including interface types) whose interface has, possibly as a
subset, the complete set of methods of an interface I is said to implement
interface I. For instance, if two types S1 and S2 have the methods

	func (p T) Read(b Buffer) bool { return ... }
	func (p T) Write(b Buffer) bool { return ... }
	func (p T) Close() { ... }

(where T stands for either S1 or S2) then the File interface is
implemented by both S1 and S2, regardless of what other methods
S1 and S2 may have or share.

All types implement the empty interface:

	interface {}

In general, a type implements an arbitrary number of interfaces.
For instance, consider the interface

	type Lock interface {
		Lock, Unlock	();
	}

If S1 and S2 also implement

	func (p T) Lock() { ... }
	func (p T) Unlock() { ... }

they implement the Lock interface as well as the File interface.

An interface may contain a type name T in place of a method specification.
T must denote another, complete (and not forward-declared) interface type.
Using this notation is equivalent to enumerating the methods of T explicitly
in the interface containing T.

	type ReadWrite interface {
		Read, Write	(b Buffer) bool;
	}

	type File interface {
		ReadWrite;  // same as enumerating the methods in ReadWrite
		Lock;       // same as enumerating the methods in Lock
		Close();
	}

Forward declaration:
A interface type consisting of only the reserved word "interface" may be used in
a type declaration; it declares an incomplete interface type (§Type declarations).
This allows the construction of mutually recursive types such as:

	type T2 interface
	type T1 interface {
		foo(T2) int;
	}
	type T2 interface {
		bar(T1) int;
	}

Assignment compatibility: A value can be assigned to an interface variable
if the static type of the value implements the interface or if the value is "nil".

Comparisons: A variable of interface type can be compared against "nil" with the
operators "==" and "!=" (§Comparison operators). The variable is
"nil" only if "nil" is assigned explicitly to the variable (§Assignments), or
if the variable has not been modified since creation (§Program initialization
and execution).

Two variables of interface type can be tested for equality with the
operators "==" and "!=" (§Comparison operators) if both variables have the
same static type. They are equal if both their dynamic types and values are
equal. If the dynamic types are equal but the values do not support comparison,
a run-time error occurs.


Slice types
----

A slice type denotes the set of all slices (segments) of arrays
(§Array types) of a given element type, and the value "nil".
The number of elements of a slice is called its length; it is never negative.
The elements of a slice are designated by indices which are
integers from 0 through the length - 1.

	SliceType = "[" "]" ElementType .

Syntactically and semantically, arrays and slices look and behave very
similarly, but with one important difference: A slice is a descriptor
of an array segment; in particular, different variables of a slice type may
refer to different (and possibly overlapping) segments of the same underlying
array. Thus, with respect to the underlying array, slices behave like
references. In contrast, two different variables of array type always
denote two different arrays.

For slices, the actual array underlying the slice may extend past the current
slice length; the maximum length a slice may assume is called its capacity.
The capacity of any slice "a" can be discovered using the built-in function

	cap(a)

and the following relationship between "len()" and "cap()" holds:

	0 <= len(a) <= cap(a)

The value of an uninitialized slice is "nil", and its length and capacity
are 0. A new, initialized slice value for a given element type T is
made using the built-in function "make", which takes a slice type
and parameters specifying the length and optionally the capacity:

	make([]T, length)
	make([]T, length, capacity)
	
The "make()" call allocates a new underlying array to which the returned
slice value refers. More precisely, calling "make"

	make([]T, length, capacity)

is effectively the same as allocating an array and slicing it

	new([capacity]T)[0 : length]

Assignment compatibility: Slices are assignment compatible to variables
of the same type.

Indexing: Given a (pointer to) a slice variable "a", a slice element is
specified with an index operation:

	a[i]

This denotes the slice element at index "i". "i" must be within bounds,
that is "0 <= i < len(a)".

Slicing: Given a a slice variable "a", a sub-slice is created with a slice
operation:

	a[i : j]

This creates the sub-slice consisting of the elements "a[i]" through "a[j - 1]"
(that is, excluding "a[j]"). The values "i" and "j" must satisfy the condition
"0 <= i <= j <= cap(a)". The length of the new slice is "j - i". The capacity of
the slice is "cap(a) - i"; thus if "i" is 0, the slice capacity does not change
as a result of a slice operation. The type of a sub-slice is the same as the
type of the slice. Unlike the capacity, the length of a sub-slice may be larger
than the length of the original slice.

Comparisons: A variable of slice type can be compared against "nil" with the
operators "==" and "!=" (§Comparison operators). The variable is
"nil" only if "nil" is assigned explicitly to the variable (§Assignments), or
if the variable has not been modified since creation (§Program initialization
and execution).


Map types
----

A map is a composite type consisting of a variable number of entries
called (key, value) pairs. For a given map, the keys and values must
each be of a specific complete type (§Types) called the key and value type,
respectively. The number of entries in a map is called its length; it is never
negative.

	MapType = "map" "[" KeyType "]" ValueType .
	KeyType = CompleteType .
	ValueType = CompleteType .

The comparison operators "==" and "!=" (§Comparison operators) must be defined
for operands of the key type; thus the key type must be a basic, pointer,
interface, or channel type. If the key type is an interface type,
the dynamic key types must support these comparison operators. In this case,
inserting a map value with a key that does not support testing for equality
is a run-time error.

Upon creation, a map is empty and values may be added and removed
during execution.

	map [string] int
	map [*T] struct { x, y float }
	map [string] interface {}

The length of a map "m" can be discovered using the built-in function

	len(m)

The value of an uninitialized map is "nil". A new, empty map value for given
map type M is made using the built-in function "make" which takes the map type
and an optional capacity as arguments:

	my_map := make(M, 100);

The map capacity is an allocation hint for more efficient incremental growth
of the map.

Assignment compatibility: A map type is assignment compatible to a variable of
map type only if both types are equal.

Comparisons: A variable of map type can be compared against "nil" with the
operators "==" and "!=" (§Comparison operators). The variable is
"nil" only if "nil" is assigned explicitly to the variable (§Assignments), or
if the variable has not been modified since creation (§Program initialization
and execution).


Channel types
----

A channel provides a mechanism for two concurrently executing functions
to synchronize execution and exchange values of a specified type. This
type must be a complete type (§Types). (TODO could it be incomplete?)

	ChannelType = Channel | SendChannel | RecvChannel .
	Channel = "chan" ValueType .
	SendChannel = "chan" "<-" ValueType .
	RecvChannel = "<-" "chan" ValueType .

Upon creation, a channel can be used both to send and to receive.
By conversion or assignment, a channel may be constrained only to send or
to receive. This constraint is called a channel's ``direction''; either
bi-directional (unconstrained), send, or receive.

	chan T         // can send and receive values of type T
	chan <- float  // can only be used to send floats
	<-chan int     // can only receive ints

The value of an uninitialized channel is "nil". A new, initialized channel
value for a given element type T is made using the built-in function "make",
which takes the channel type and an optional capacity as arguments:

	my_chan = make(chan int, 100);

The capacity sets the size of the buffer in the communication channel. If the
capacity is greater than zero, the channel is asynchronous and, provided the
buffer is not full, sends can succeed without blocking. If the capacity is zero,
the communication succeeds only when both a sender and receiver are ready.

Assignment compatibility: A value of type channel can be assigned to a variable
of type channel only if a) both types are equal (§Type equality), or b) both
have equal channel value types and the value is a bidirectional channel.

Comparisons: A variable of channel type can be compared against "nil" with the
operators "==" and "!=" (§Comparison operators). The variable is
"nil" only if "nil" is assigned explicitly to the variable (§Assignments), or
if the variable has not been modified since creation (§Program initialization
and execution).

Two variables of channel type can be tested for equality with the
operators "==" and "!=" (§Comparison operators) if both variables have
the same ValueType. They are equal if both values were created by the same
"make" call (§Making slices, maps, and channels).


Type equality
----

Types may be ``different'', ``structurally equal'', or ``identical''.
Go is a type-safe language; generally different types cannot be mixed
in binary operations, and values cannot be assigned to variables of different
types. However, values may be assigned to variables of structually
equal types. Finally, type guards succeed only if the dynamic type
is identical to or implements the type tested against (§Type guards).

Structural type equality (equality for short) is defined by these rules:

Two type names denote equal types if the types in the corresponding declarations
are equal. Two type literals specify equal types if they have the same
literal structure and corresponding components have equal types. Loosely
speaking, two types are equal if their values have the same layout in memory.
More precisely:

	- Two array types are equal if they have equal element types and if they
	  have the same array length.

	- Two struct types are equal if they have the same number of fields in the
	  same order, corresponding fields either have both the same name or
	  are both anonymous, and corresponding field types are identical.

	- Two pointer types are equal if they have equal base types.

	- Two function types are equal if they have the same number of parameters
	  and result values and if corresponding parameter and result types are
	  equal (a "..." parameter is equal to another "..." parameter).
	  Note that parameter and result names do not have to match.

	- Two slice types are equal if they have equal element types.

	- Two channel types are equal if they have equal value types and
	  the same direction.

	- Two map types are equal if they have equal key and value types.

	- Two interface types are equal if they have the same set of methods
	  with the same names and equal function types. Note that the order
	  of the methods in the respective type declarations is irrelevant.


Type identity is defined by these rules:

Two type names denote identical types if they originate in the same
type declaration. Two type literals specify identical types if they have the
same literal structure and corresponding components have identical types.
More precisely:

	- Two array types are identical if they have identical element types and if
	  they have the same array length.

	- Two struct types are identical if they have the same number of fields in
	  the same order, corresponding fields either have both the same name or
	  are both anonymous, and corresponding field types are identical.

	- Two pointer types are identical if they have identical base types.

	- Two function types are identical if they have the same number of
	  parameters and result values both with the same (or absent) names, and
	  if corresponding parameter and result types are identical (a "..."
	  parameter is identical to another "..." parameter with the same name).

	- Two slice types are identical if they have identical element types.

	- Two channel types are identical if they have identical value types and
	  the same direction.

	- Two map types are identical if they have identical key and value types.

	- Two interface types are identical if they have the same set of methods
	  with the same names and identical function types. Note that the order
	  of the methods in the respective type declarations is irrelevant.

Note that the type denoted by a type name is identical only to the type literal
in the type name's declaration.

Finally, two types are different if they are not structurally equal.
(By definition, they cannot be identical, either).

For instance, given the declarations

	type (
		T0 []string;
		T1 []string
		T2 struct { a, b int };
		T3 struct { a, c int };
		T4 func (int, float) *T0
		T5 func (x int, y float) *[]string
	)

these are some types that are equal

	T0 and T0
	T0 and []string
	T2 and T3
	T4 and T5
	T3 and struct { a int; int }

and these are some types that are identical

	T0 and T0
	[]int and []int
	struct { a, b *T5 } and struct { a, b *T5 }

As an example, "T0" and "T1" are equal but not identical because they have
different declarations.


----

Expressions
----

An expression specifies the computation of a value via the application of
operators and function invocations on operands. An expression has a value and
a type.

The type of a constant expression may be an ideal number. The type of such expressions
is implicitly converted into the 'expected numeric type' required for the expression.
The conversion is legal if the (ideal) expression value is a member of the
set represented by the expected numeric type. In all other cases, and specifically
if the expected type is not a numeric type, the expression is erroneous.

For instance, if the expected numeric type is a uint32, any ideal number
which fits into a uint32 without loss of precision can be legally converted.
Thus, the values 991, 42.0, and 1e9 are ok, but -1, 3.14, or 1e100 are not.

<!--
TODO(gri) This may be overly constraining. What about "len(a) + c" where
c is an ideal number? Is len(a) of type int, or of an ideal number? Probably
should be ideal number, because for arrays, it is a constant.
-->


Operands
----

Operands denote the elementary values in an expression.

	Operand  = Literal | QualifiedIdent | "(" Expression ")" .
	Literal  = BasicLit | CompositeLit | FunctionLit .
	BasicLit = int_lit | float_lit | char_lit | StringLit .
	StringLit = string_lit { string_lit } .


Constants
----

An operand is called ``constant'' if it is a literal of a basic type
(including the predeclared constants "true" and "false", and the values
denoted by "iota"), the predeclared constant "nil", or a parenthesized
constant expression (§Constant expressions). Constants have values that
are known at compile-time.


Qualified identifiers
----

A qualified identifier is an identifier qualified by a package name.

TODO(gri) expand this section.

	QualifiedIdent = { PackageName "." } identifier .
	PackageName = identifier .


Composite literals
----

Literals for composite data structures consist of the type of the value
followed by a braced expression list for array, slice, and structure literals,
or a list of expression pairs for map literals.

	CompositeLit = LiteralType "{" [ ( ExpressionList | ExprPairList ) [ "," ] ] "}" .
	LiteralType = Type | "[" "..." "]" ElementType .
	ExprPairList = ExprPair { "," ExprPair } .
	ExprPair = Expression ":" Expression .

The LiteralType must be an struct, array, slice, or map type.
The types of the expressions must match the respective field, element, and
key types of the LiteralType; there is no automatic type conversion.
Composite literals are values of the type specified by LiteralType; that is
a new value is created every time the literal is evaluated. To get
a pointer to the literal, the address operator "&" must be used.

Given

	type Rat struct { num, den int }
	type Num struct { r Rat; f float; s string }

one can write

	pi := Num{Rat{22, 7}, 3.14159, "pi"};

The length of an array literal is the length specified in the LiteralType.
If fewer elements than the length are provided in the literal, the missing
elements are set to the appropriate zero value for the array element type.
It is an error to provide more elements than specified in LiteralType. The
notation "..." may be used in place of the length expression to denote a
length equal to the number of elements in the literal.

	buffer := [10]string{};               // len(buffer) == 10
	primes := [6]int{2, 3, 5, 7, 9, 11};  // len(primes) == 6
	days := [...]string{"sat", "sun"};    // len(days) == 2

A slice literal is a slice describing the entire underlying array literal.
Thus, the length and capacity of a slice literal is the number of elements
provided in the literal. A slice literal of the form

	[]T{x1, x2, ... xn}

is essentially a shortcut for a slice operation applied to an array literal:

	[n]T{x1, x2, ... xn}[0 : n]

Map literals are similar except the elements of the expression list are
key-value pairs separated by a colon:

	m := map[string]int{"good": 0, "bad": 1, "indifferent": 7};

TODO: Consider adding helper syntax for nested composites
(avoids repeating types but complicates the spec needlessly.)


Function literals
----

A function literal represents an anonymous function. It consists of a
specification of the function type and the function body. The parameter
and result types of the function type must all be complete types (§Types).

	FunctionLit = "func" Signature Block .
	Block = "{" [ StatementList ] "}" .

The type of a function literal is the function type specified.

	func (a, b int, z float) bool { return a*b < int(z); }

A function literal can be assigned to a variable of the
corresponding function type, or invoked directly.

	f := func(x, y int) int { return x + y; }
	func(ch chan int) { ch <- ACK; } (reply_chan)

Function literals are "closures": they may refer to variables
defined in a surrounding function. Those variables are then shared between
the surrounding function and the function literal, and they survive as long
as they are accessible in any way.


Primary expressions
----
	
	PrimaryExpr =
		Operand |
		PrimaryExpr Selector |
		PrimaryExpr Index |
		PrimaryExpr Slice |
		PrimaryExpr TypeGuard |
		PrimaryExpr Call .

	Selector = "." identifier .
	Index = "[" Expression "]" .
	Slice = "[" Expression ":" Expression "]" .
	TypeGuard = "." "(" Type ")" .
	Call = "(" [ ExpressionList ] ")" .


	x
	2
	(s + ".txt")
	f(3.1415, true)
	Point(1, 2)
	m["foo"]
	s[i : j + 1]
	obj.color
	Math.sin
	f.p[i].x()


Selectors
----

A primary expression of the form

	x.f

denotes the field or method f of the value denoted by x (or of *x if
x is of pointer type). The identifier f is called the (field or method)
``selector''.

A selector f may denote a field f declared in a type T, or it may refer
to a field f declared in a nested anonymous field of T. Analogously,
f may denote a method f of T, or it may refer to a method f of the type
of a nested anonymous field of T. The number of anonymous fields traversed
to get to the field or method is called its ``depth'' in T.

More precisely, the depth of a field or method f declared in T is zero.
The depth of a field or method f declared anywhere inside
an anonymous field A declared in T is the depth of f in A plus one.

The following rules apply to selectors:

1) For a value x of type T or *T where T is not an interface type,
x.f denotes the field or method at the shallowest depth in T where there
is such an f. The type of x.f is the type of the field or method f.
If there is not exactly one f with shallowest depth, the selector
expression is illegal.

2) For a variable x of type I or *I where I is an interface type,
x.f denotes the actual method with name f of the value assigned
to x if there is such a method. The type of x.f is the type
of the method f. If no value or nil was assigned to x, x.f is illegal.

3) In all other cases, x.f is illegal.

Thus, selectors automatically dereference pointers as necessary. For instance,
for an x of type *T where T declares an f, x.f is a shortcut for (*x).f.
Furthermore, for an x of type T containing an anonymous field A declared as *A
inside T, and where A contains a field f, x.f is a shortcut for (*x.A).f
(assuming that the selector is legal in the first place).

The following examples illustrate selector use in more detail. Given the
declarations:

	type T0 struct {
		x int;
	}

	func (recv *T0) M0()

	type T1 struct {
		y int;
	}

	func (recv T1) M1()

	type T2 struct {
		z int;
		T1;
		*T0;
	}

	func (recv *T2) M2()

	var p *T2;  // with p != nil and p.T1 != nil

one can write:

	p.z         // (*p).z
	p.y         // ((*p).T1).y
	p.x         // (*(*p).T0).x

	p.M2        // (*p).M2
	p.M1        // ((*p).T1).M1
	p.M0        // ((*p).T0).M0


TODO: Specify what happens to receivers.


Indexes
----

A primary expression of the form

	a[x]

denotes the array or map element x. The value x is called the
``array index'' or ``map key'', respectively. The following
rules apply:

For a of type A or *A where A is an array type (§Array types):

	- x must be an integer value and 0 <= x < len(a)
	- a[x] is the array element at index x and the type of a[x]
	  is the element type of A

For a of type *M, where M is a map type (§Map types):

	- x must be of the same type as the key type of M
	  and the map must contain an entry with key x
	- a[x] is the map value with key x and the type of a[x]
	  is the value type of M

Otherwise a[x] is illegal.

TODO: Need to expand map rules for assignments of the form v, ok = m[k].


Slices
----

Strings, arrays, and slices can be ``sliced'' to construct substrings or descriptors
of subarrays. The index expressions in the slice select which elements appear
in the result.  The result has indexes starting at 0 and length equal to the
difference in the index values in the slice.  After slicing the array "a"

	a := [4]int{1, 2, 3, 4};
	s := a[1:3];

the slice "s" has type "[]int", length 2, and elements

	s[0] == 2
	s[1] == 3

The index values in the slice must be in bounds for the original
array (or string) and the slice length must be non-negative.

If the sliced operand is a string, the result of the slice operation is another
string (§String types). If the sliced operand is an array or slice, the result
of the slice operation is a slice (§Slice types).


Type guards
----

For an expression "x" and a type "T", the primary expression

	x.(T)

asserts that the value stored in "x" is an element of type "T" (§Types).
The notation ".(T)" is called a ``type guard'', and "x.(T)" is called
a ``guarded expression''. The type of "x" must be an interface type.

More precisely, if "T" is not an interface type, the expression asserts
that the dynamic type of "x" is identical to the type "T" (§Types).
If "T" is an interface type, the expression asserts that the dynamic type
of T implements the interface "T" (§Interface types). Because it can be
verified statically, a type guard in which the static type of "x" implements
the interface "T" is illegal. The type guard is said to succeed if the
assertion holds.

If the type guard succeeds, the value of the guarded expression is the value
stored in "x" and its type is "T". If the type guard fails, a run-time
exception occurs. In other words, even though the dynamic type of "x"
is only known at run-time, the type of the guarded expression "x.(T)" is
known to be "T" in a correct program.

As a special form, if a guarded expression is used in an assignment

	v, ok = x.(T)
	v, ok := x.(T)

the result of the guarded expression is a pair of values with types "(T, bool)".
If the type guard succeeds, the expression returns the pair "(x.(T), true)";
that is, the value stored in "x" (of type "T") is assigned to "v", and "ok"
is set to true. If the type guard fails, the value in "v" is set to the initial
value for the type of "v" (§Program initialization and execution), and "ok" is
set to false. No run-time exception occurs in this case.

TODO add examples


Calls
----

TODO: This needs to be expanded and cleaned up.

Given a function or a function variable p, one writes

	p()

to call the function.

A method is called using the notation

	receiver.method()

where receiver is a value of the receiver type of the method.

For instance, given a *Point variable pt, one may call

	pt.Scale(3.5)

The type of a method is the type of a function with the receiver as first
argument.  For instance, the method "Scale" has type

	(p *Point, factor float)

However, a function declared this way is not a method.

There is no distinct method type and there are no method literals.


Parameter passing
----

TODO expand this section (right now only "..." parameters are covered).

Inside a function, the type of the "..." parameter is the empty interface
"interface {}". The dynamic type of the parameter - that is, the type of
the value stored in the parameter - is of the form (in pseudo-
notation)

	*struct {
		arg(0) typeof(arg(0));
		arg(1) typeof(arg(1));
		arg(2) typeof(arg(2));
		...
		arg(n-1) typeof(arg(n-1));
	}

where the "arg(i)"'s correspond to the actual arguments passed in place
of the "..." parameter (the parameter and type names are for illustration
only). Reflection code may be used to access the struct value and its fields.
Thus, arguments provided in place of a "..." parameter are wrapped into
a corresponding struct, and a pointer to the struct is passed to the
function instead of the actual arguments.

For instance, consider the function

	func f(x int, s string, f_extra ...)

and the call

	f(42, "foo", 3.14, true, &[]int{1, 2, 3})

Upon invocation, the parameters "3.14", "true", and "*[3]int{1, 2, 3}"
are wrapped into a struct and the pointer to the struct is passed to f.
In f the type of parameter "f_extra" is "interface{}".
The dynamic type of "f_extra" is the type of the value assigned
to it upon invocation (the field names "arg0", "arg1", "arg2" are made
up for illustration only, they are not accessible via reflection):

	*struct {
		arg0 float;
		arg1 bool;
		arg2 *[3]int;
	}

The values of the fields "arg0", "arg1", and "arg2" are "3.14", "true",
and "*[3]int{1, 2, 3}".

As a special case, if a function passes a "..." parameter as the argument
for a "..." parameter of a function, the parameter is not wrapped again into
a struct. Instead it is passed along unchanged. For instance, the function
f may call a function g with declaration

	func g(x int, g_extra ...)

as

	g(x, f_extra);

Inside g, the value stored in g_extra is the same as the value stored
in f_extra.


Operators
----

Operators combine operands into expressions.

	Expression = UnaryExpr | Expression binaryOp UnaryExpr .
	UnaryExpr = PrimaryExpr | unary_op UnaryExpr .

	binary_op = log_op | com_op | rel_op | add_op | mul_op .
	log_op = "||" | "&&" .
	com_op = "<-" .
	rel_op = "==" | "!=" | "<" | "<=" | ">" | ">=" .
	add_op = "+" | "-" | "|" | "^" .
	mul_op = "*" | "/" | "%" | "<<" | ">>" | "&" .

	unary_op = "+" | "-" | "!" | "^" | "*" | "&" | "<-" .

The operand types in binary operations must be equal, with the following exceptions:

	- If one operand has numeric type and the other operand is
	  an ideal number, the ideal number is converted to match the type of
	  the other operand (§Expression).

	- If both operands are ideal numbers, the conversion is to ideal floats
	  if one of the operands is an ideal float (relevant for "/" and "%").

	- The right operand in a shift operation must be always be an unsigned int
	  (or an ideal number that can be safely converted into an unsigned int)
	  (§Arithmetic operators).

	- When comparing two operands of channel type, the channel value types
	  must be equal but the channel direction is ignored.

Unary operators have the highest precedence. They are evaluated from
right to left. Note that "++" and "--" are outside the unary operator
hierachy (they are statements) and they apply to the operand on the left.
Specifically, "*p++" means "(*p)++" in Go (as opposed to "*(p++)" in C).

There are six precedence levels for binary operators:
multiplication operators bind strongest, followed by addition
operators, comparison operators, communication operators,
"&&" (logical and), and finally "||" (logical or) with the
lowest precedence:

	Precedence    Operator
		6             *  /  %  <<  >>  &
		5             +  -  |  ^
		4             ==  !=  <  <=  >  >=
		3             <-
		2             &&
		1             ||

Binary operators of the same precedence associate from left to right.
For instance, "x / y / z" stands for "(x / y) / z".

Examples

	+x
	23 + 3*x[i]
	x <= f()
	^a >> b
	f() || g()
	x == y + 1 && <-chan_ptr > 0


Arithmetic operators
----

Arithmetic operators apply to numeric types and yield a result of the same
type as the first operand. The four standard arithmetic operators ("+", "-",
"*", "/") apply to both integer and floating point types, while "+" also applies
to strings and arrays; all other arithmetic operators apply to integer types only.

	+    sum             integers, floats, strings, arrays
	-    difference      integers, floats
	*    product         integers, floats
	/    quotient        integers, floats
	%    remainder       integers
	
	&    bitwise and     integers
	|    bitwise or      integers
	^    bitwise xor     integers
	
	<<   left shift      integer << unsigned integer
	>>   right shift     integer >> unsigned integer

Strings and arrays can be concatenated using the "+" operator
(or via the "+=" assignment):

	s := "hi" + string(c)
	a += []int{5, 6, 7}

String and array addition creates a new array or string by copying the
elements.

For integer values, "/" and "%" satisfy the following relationship:

	(a / b) * b + a % b == a

and

	(a / b) is "truncated towards zero".

Examples:

	 x     y     x / y     x % y
	 5     3       1         2
	-5     3      -1        -2
	 5    -3      -1         2
	-5    -3       1        -2

Note that if the dividend is positive and the divisor is a constant power of 2,
the division may be replaced by a left shift, and computing the remainder may
be replaced by a bitwise "and" operation:

	 x     x / 4     x % 4     x >> 2     x & 3
	 11      2         3         2          3
	-11     -2        -3        -3          1

The shift operators shift the left operand by the shift count specified by the
right operand. They implement arithmetic shifts if the left operand is a signed
integer, and logical shifts if it is an unsigned integer. The shift count must
be an unsigned integer. There is no upper limit on the shift count. It is
as if the left operand is shifted "n" times by 1 for a shift count of "n".
Specifically, "x << 1" is the same as "x*2"; and "x >> 1" is the same as
"x/2 truncated towards negative infinity".

For integer operands, the unary operators "+", "-", and "^" are defined as
follows:

	+x                          is 0 + x
	-x    negation              is 0 - x
	^x    bitwise complement    is m ^ x  with m = "all bits set to 1"


Integer overflow
----

For unsigned integer values, the operations "+", "-", "*", and "<<" are
computed modulo 2^n, where n is the bit width of the unsigned integer type
(§Arithmetic types). Loosely speaking, these unsigned integer operations
discard high bits upon overflow, and programs may rely on ``wrap around''.

For signed integers, the operations "+", "-", "*", and "<<" may legally
overflow and the resulting value exists and is deterministically defined
by the signed integer representation, the operation, and its operands.
No exception is raised as a result of overflow. As a consequence, a
compiler may not optimize code under the assumption that overflow does
not occur. For instance, it may not assume that "x < x + 1" is always true.


Comparison operators
----

Comparison operators yield a boolean result. All comparison operators apply
to strings and numeric types. The operators "==" and "!=" also apply to
boolean values, pointer, interface, and channel types. Slice and
map types only support testing for equality against the predeclared value
"nil".

	==    equal
	!=    not equal
	<     less
	<=    less or equal
	>     greater
	>=    greater or equal

Strings are compared byte-wise (lexically).

Booleans are equal if they are either both "true" or both "false".

Pointers are equal if they point to the same value.

Interface, slice, map, and channel types can be compared for equality according
to the rules specified in the section on §Interface types, §Slice types, §Map types,
and §Channel types, respectively.


Logical operators
----

Logical operators apply to boolean operands and yield a boolean result.
The right operand is evaluated conditionally.

	&&    conditional and    p && q  is  "if p then q else false"
	||    conditional or     p || q  is  "if p then true else q"
	!     not                !p      is  "not p"


Address operators
----

TODO: Need to talk about unary "*", clean up section below.

TODO: This text needs to be cleaned up and go elsewhere, there are no address
operators involved.

Methods are a form of function, and a method ``value'' has a function type.
Consider the type T with method M:

	type T struct {
		a int;
	}
	func (tp *T) M(a int) int;
	var t *T;

To construct the value of method M, one writes

	t.M

using the variable t (not the type T).
TODO: It makes perfect sense to be able to say T.M (in fact, it makes more
sense then t.M, since only the type T is needed to find the method M, i.e.,
its address). TBD.

The expression t.M is a function value with type

	func (t *T, a int) int

and may be invoked only as a function, not as a method:

	var f func (t *T, a int) int;
	f = t.M;
	x := f(t, 7);

Note that one does not write t.f(7); taking the value of a method demotes
it to a function.

In general, given type T with method M and variable t of type T,
the method invocation

	t.M(args)

is equivalent to the function call

	(t.M)(t, args)

TODO: should probably describe the effect of (t.m) under §Expressions if t.m
denotes a method: Effect is as described above, converts into function.

If T is an interface type, the expression t.M does not determine which
underlying type's M is called until the point of the call itself. Thus given
T1 and T2, both implementing interface I with method M, the sequence

	var t1 *T1;
	var t2 *T2;
	var i I = t1;
	m := i.M;
	m(t2, 7);

will invoke t2.M() even though m was constructed with an expression involving
t1. Effectively, the value of m is a function literal

	func (recv I, a int) {
		recv.M(a);
	}

that is automatically created.

TODO: Document implementation restriction: It is illegal to take the address
of a result parameter (e.g.: func f() (x int, p *int) { return 2, &x }).
(TBD: is it an implementation restriction or fact?)


Communication operators
----

The syntax presented above covers communication operations.  This
section describes their form and function.

Here the term "channel" means "variable of type chan".

The built-in function "make" makes a new channel value:

	ch := make(chan int)

An optional argument to "make()" specifies a buffer size for an
asynchronous channel; if absent or zero, the channel is synchronous:

	sync_chan := make(chan int)
	buffered_chan := make(chan int, 10)

The send operation uses the binary operator "<-", which operates on
a channel and a value (expression):

	ch <- 3

In this form, the send operation is an (expression) statement that
sends the value on the channel. Both the channel and the expression
are evaluated before communication begins.  Communication blocks
until the send can proceed, at which point the value is transmitted
on the channel.

If the send operation appears in an expression context, the value
of the expression is a boolean and the operation is non-blocking.
The value of the boolean reports true if the communication succeeded,
false if it did not.  These two examples are equivalent:

	ok := ch <- 3;
	if ok { print("sent") } else { print("not sent") }

	if ch <- 3 { print("sent") } else { print("not sent") }

In other words, if the program tests the value of a send operation,
the send is non-blocking and the value of the expression is the
success of the operation.  If the program does not test the value,
the operation blocks until it succeeds.

TODO: Adjust the above depending on how we rule on the ok semantics.
For instance, does the sent expression get evaluated if ok is false?

The receive operation uses the prefix unary operator "<-".
The value of the expression is the value received:

	<-ch

The expression blocks until a value is available, which then can
be assigned to a variable or used like any other expression:

	v1 := <-ch
	v2 = <-ch
	f(<-ch)

If the receive expression does not save the value, the value is
discarded:

	<-strobe  // wait until clock pulse

If a receive expression is used in a tuple assignment of the form

	x, ok = <-ch;  // or: x, ok := <-ch

the receive operation becomes non-blocking, and the boolean variable
"ok" will be set to "true" if the receive operation succeeded, and set
to "false" otherwise.


Constant expressions
----

A constant expression is an expression whose operands are all constants
(§Constants). Additionally, the result of the predeclared functions
below (with appropriate arguments) is also constant:

	len(a)		if a is an array (as opposed to an array slice)

TODO: Complete this list as needed.

Constant expressions can be evaluated at compile time.


----

Statements
----

Statements control execution.

	Statement =
		Declaration | LabelDecl | EmptyStat |
		SimpleStat | GoStat | ReturnStat | BreakStat | ContinueStat | GotoStat |
		FallthroughStat | Block | IfStat | SwitchStat | SelectStat | ForStat |
		DeferStat .

	SimpleStat =
		ExpressionStat | IncDecStat | Assignment | SimpleVarDecl .


Statements in a statement list are separated by semicolons, which can be
omitted in some cases as expressed by the OptSemicolon production.

	StatementList = Statement { OptSemicolon Statement } .

A semicolon may be omitted immediately following:

	- a closing parenthesis ")" ending a list of declarations (§Declarations and scope rules)
	- a closing brace "}" ending a type declaration (§Type declarations)
	- a closing brace "}" ending a block (including switch and select statements)
	- a label declaration (§Label declarations)

In all other cases a semicolon is required to separate two statements. Since there
is an empty statement, a statement list can always be ``terminated'' with a semicolon.


Empty statements
----

The empty statement does nothing.

	EmptyStat = .


Expression statements
----

	ExpressionStat = Expression .

	f(x+y)

TODO: specify restrictions. 6g only appears to allow calls here.


IncDec statements
----

The "++" and "--" statements increment or decrement their operands
by the (ideal) constant value 1.

	IncDecStat = Expression ( "++" | "--" ) .
	
The following assignment statements (§Assignments) are semantically
equivalent:

	IncDec statement    Assignment
	x++                 x += 1
	x--                 x -= 1

Both operators apply to integer and floating point types only.

Note that increment and decrement are statements, not expressions.
For instance, "x++" cannot be used as an operand in an expression.


Assignments
----

	Assignment = ExpressionList assign_op ExpressionList .
	
	assign_op = [ add_op | mul_op ] "=" .

The left-hand side must be an l-value such as a variable, pointer indirection,
or an array index.

	x = 1
	*p = f()
	a[i] = 23
	k = <-ch
	
As in C, arithmetic binary operators can be combined with assignments:

	j <<= 2

A tuple assignment assigns the individual elements of a multi-valued operation,
such as function evaluation or some channel and map operations, into individual
variables. For instance, a tuple assignment such as

	v1, v2, v3 = e1, e2, e3
	
assigns the expressions e1, e2, e3 to temporaries and then assigns the temporaries
to the variables v1, v2, v3. Thus

	a, b = b, a

exchanges the values of a and b. The tuple assignment

	x, y = f()

calls the function f, which must return two values, and assigns them to x and y.
As a special case, retrieving a value from a map, when written as a two-element
tuple assignment, assign a value and a boolean. If the value is present in the map,
the value is assigned and the second, boolean variable is set to true. Otherwise,
the variable is unchanged, and the boolean value is set to false.
	
	value, present = map_var[key]

To delete a value from a map, use a tuple assignment with the map on the left
and a false boolean expression as the second expression on the right, such
as:

	map_var[key] = value, false
		
In assignments, the type of the expression must match the type of the left-hand side.


If statements
----

If statements specify the conditional execution of two branches; the "if"
and the "else" branch. If Expression evaluates to true,
the "if" branch is executed. Otherwise the "else" branch is executed if present.
If Condition is omitted, it is equivalent to true.

	IfStat = "if" [ [ SimpleStat ] ";" ] [ Expression ] Block [ "else" Statement ] .

	if x > 0 {
		return true;
	}

An "if" statement may include the declaration of a single temporary variable.
The scope of the declared variable extends to the end of the if statement, and
the variable is initialized once before the statement is entered.

	if x := f(); x < y {
		return x;
	} else if x > z {
		return z;
	} else {
		return y;
	}


<!--
TODO: gri thinks that Statement needs to be changed as follows:

	IfStat =
	       "if" [ [ SimpleStat ] ";" ] [ Expression ] Block
	       [ "else" ( IfStat | Block ) ] .

To facilitate the "if else if" code pattern, if the "else" branch is
simply another "if" statement, that "if" statement may be written
without the surrounding Block:

	if x > 0 {
		return 0;
	} else if x > 10 {
		return 1;
	} else {
		return 2;
	}

-->

Switch statements
----

Switches provide multi-way execution.

	SwitchStat = "switch" [ [ SimpleStat ] ";" ] [ Expression ] "{" { CaseClause } "}" .
	CaseClause = SwitchCase ":" [ StatementList ] .
	SwitchCase = "case" ExpressionList | "default" .

There can be at most one default case in a switch statement. In a case clause,
the last statement only may be a fallthrough statement ($Fallthrough statement).
It indicates that the control should flow from the end of this case clause to
the first statement of the next clause.

Each case clause effectively acts as a block for scoping purposes
($Declarations and scope rules).

The expressions do not need to be constants. They will
be evaluated top to bottom until the first successful non-default case is reached.
If none matches and there is a default case, the statements of the default
case are executed.

	switch tag {
	default: s3()
	case 0, 1: s1()
	case 2: s2()
	}

A switch statement may include the declaration of a single temporary variable.
The scope of the declared variable extends to the end of the switch statement, and
the variable is initialized once before the switch is entered. 

	switch x := f(); true {
	case x < 0: return -x
	default: return x
	}
	
Cases do not fall through unless explicitly marked with a "fallthrough" statement.

	switch a {
	case 1:
		b();
		fallthrough
	case 2:
		c();
	}

If the expression is omitted, it is equivalent to "true".

	switch {
	case x < y: f1();
	case x < z: f2();
	case x == 4: f3();
	}


For statements
----

A for statement specifies repeated execution of a block. The iteration is
controlled by a condition, a for clause, or a range clause.

	ForStat = "for" [ Condition | ForClause | RangeClause ] Block .
	Condition = Expression .

In its simplest form, a for statement specifies the repeated execution of
a block as long as a condition evaluates to true. The condition is evaluated
before each iteration. The type of the condition expression must be boolean.
If the condition is absent, it is equivalent to "true".

	for a < b {
		a *= 2
	}

A for statement with a for clause is also controlled by its condition, but
additionally it may specify an init and post statement, such as an assignment,
an increment or decrement statement. The init statement may also be a (simple)
variable declaration; no variables can be declared in the post statement.

	ForClause = [ InitStat ] ";" [ Condition ] ";" [ PostStat ] .
	InitStat = SimpleStat .
	PostStat = SimpleStat .

For instance, one may declare an iteration variable in the init statement:

	for i := 0; i < 10; i++ {
		f(i)
	}
	
If present, the init statement is executed once before commencing the iteration;
the post statement is executed after each execution of the statement block (and
only if the block was executed). The scope of any variable declared in the init
statement ends with the end of the for statement block ($Declarations and scope
rules, Rule 3).

The init and post statement as well as the condition may be omitted; however
if either the init or post statement are present, the separating semicolons
must be present. If the condition is absent, it is equivalent to "true".
The following statements are equivalent:

	for ; cond ; { S() }    is the same as    for cond { S() }
	for true { S() }        is the same as    for      { S() }

Alternatively, a for statement may be controlled by a range clause. A
range clause specifies iteration through all entries of an array or map.
For each entry it first assigns the current index or key to an iteration
variable - or the current (index, element) or (key, value) pair to a pair
of iteration variables - and then executes the block. Iteration terminates
when all entries have been processed, or if the for statement is terminated
early, for instance by a break or return statement.

	RangeClause = IdentifierList ( "=" | ":=" ) "range" Expression .

The type of the right-hand expression in the range clause must be an array or
map, or a pointer to an array or map. If it is a pointer, it must not be nil.
The left-hand identifier list must contain one or two identifiers denoting the
iteration variables. The first variable is set to the current array index or
map key, and the second variable, if present, is set to the corresponding
array element or map value. The types of the array index (int) and element,
or of the map key and value respectively, must be assignment-compatible to
the iteration variables.

The iteration variables may be declared by the range clause (":="), in which
case their scope ends at the end of the for statement block ($Declarations and
scope rules, Rule 3). In this case their types are the array index and element,
or the map key and value types, respectively.

	var a [10]string;
	m := map[string]int{"mon":0, "tue":1, "wed":2, "thu":3, "fri":4, "sat":5, "sun":6};
	
	for i, s := range a {
		// type of i is int
		// type of s is string
		// s == a[i]
		g(i, s)
	}

	var key string;
	var val interface {};  // value type of m is assignment-compatible to val
	for key, value = range m {
		h(key, value)
	}
	// key == last map key encountered in iteration
	// val == map[key]

If map entries that have not yet been processed are deleted during iteration,
they will not be processed. If map entries are inserted during iteration, the
behavior is implementation-dependent. Likewise, if the range expression is a
pointer variable, the behavior of assigning to that variable is implementation-
dependent. Assigning to the iteration variables during iteration simply changes
the values of those variables for the current iteration; it does not affect any
subsequent iterations.


Go statements
----

A go statement starts the execution of a function as an independent
concurrent thread of control within the same address space. The expression
must be a function or method call.

	GoStat = "go" Expression .

Unlike with a regular function call, program execution does not wait
for the invoked function to complete.

	go Server()
	go func(ch chan <- bool) { for { sleep(10); ch <- true; }} (c)


Select statements
----

A select statement chooses which of a set of possible communications
will proceed.  It looks similar to a switch statement but with the
cases all referring to communication operations.

	SelectStat = "select" "{" { CommClause } "}" .
	CommClause = CommCase ":" [ StatementList ] .
	CommCase = "case" ( SendExpr | RecvExpr) | "default" .
	SendExpr =  Expression "<-" Expression .
	RecvExpr =  [ Expression ( "=" | ":=" ) ] "<-" Expression .

Each communication clause acts as a block for the purpose of scoping
(§Declarations and scope rules).

For all the send and receive expressions in the select
statement, the channel expression is evaluated.  Any values
that appear on the right hand side of send expressions are also
evaluated. If any of the resulting channels can proceed, one is
chosen and the corresponding communication and statements are
evaluated.  Otherwise, if there is a default case, that executes;
if not, the statement blocks until one of the communications can
complete.  The channels and send expressions are not re-evaluated.
A channel pointer may be nil, which is equivalent to that case not
being present in the select statement.

Since all the channels and send expressions are evaluated, any side
effects in that evaluation will occur for all the communications
in the select.

If the channel sends or receives an interface type, its
communication can proceed only if the type of the communication
clause matches that of the dynamic value to be exchanged.

If multiple cases can proceed, a uniform fair choice is made regarding
which single communication will execute.

The receive case may declare a new variable (via a ":=" assignment). The
scope of such variables begins immediately after the variable identifier
and ends at the end of the respective "select" case (that is, before the
next "case", "default", or closing brace).

	var c, c1, c2 chan int;
	var i1, i2 int;
	select {
	case i1 = <-c1:
		print("received ", i1, " from c1\n");
	case c2 <- i2:
		print("sent ", i2, " to c2\n");
	default:
		print("no communication\n");
	}

	for {  // send random sequence of bits to c
		select {
		case c <- 0:  // note: no statement, no fallthrough, no folding of cases
		case c <- 1:
		}
	}

	var ca chan interface {};
	var i int;
	var f float;
	select {
	case i = <-ca:
		print("received int ", i, " from ca\n");
	case f = <-ca:
		print("received float ", f, " from ca\n");
	}

TODO: Make semantics more precise.


Return statements
----

A return statement terminates execution of the containing function
and optionally provides a result value or values to the caller.

	ReturnStat = "return" [ ExpressionList ] .


There are two ways to return values from a function.  The first is to
explicitly list the return value or values in the return statement:

	func simple_f() int {
		return 2;
	}

A function may return multiple values.
The syntax of the return clause in that case is the same as
that of a parameter list; in particular, names must be provided for
the elements of the return value.

	func complex_f1() (re float, im float) {
		return -7.0, -4.0;
	}

A second method to return values
is to use those names within the function as variables
to be assigned explicitly; the return statement will then provide no
values:

	func complex_f2() (re float, im float) {
		re = 7.0;
		im = 4.0;
		return;
	}


Break statements
----

Within a for, switch, or select statement, a break statement terminates
execution of the innermost such statement.

	BreakStat = "break" [ identifier ].

If there is an identifier, it must be a label marking an enclosing
for, switch, or select statement, and that is the one whose execution
terminates.

	L: for i < n {
		switch i {
		case 5: break L
		}
	}


Continue statements
----

Within a for loop a continue statement begins the next iteration of the
loop at the post statement.

	ContinueStat = "continue" [ identifier ].

The optional identifier is analogous to that of a break statement.


Label declarations
----

A label declaration serves as the target of a goto, break or continue statement.

	LabelDecl = identifier ":" .

Example:

	Error:


Goto statements
----

A goto statement transfers control to the corresponding label statement.

	GotoStat = "goto" identifier .

	goto Error

Executing the goto statement must not cause any variables to come into
scope that were not already in scope at the point of the goto.  For
instance, this example:

	goto L;  // BAD
	v := 3;
	L:

is erroneous because the jump to label L skips the creation of v.


Fallthrough statements
----

A fallthrough statement transfers control to the first statement of the
next case clause in a switch statement (§Switch statements). It may only
be used in a switch statement, and only as the last statement in a case
clause of the switch statement.

	FallthroughStat = "fallthrough" .


Defer statements
----

A defer statement invokes a function whose execution is deferred to the moment
when the surrounding function returns.

	DeferStat = "defer" Expression .

The expression must be a function or method call. Each time the defer statement
executes, the parameters to the function call are evaluated and saved anew but the
function is not invoked. Immediately before the innermost function surrounding
the defer statement returns, but after its return value (if any) is evaluated,
each deferred function is executed with its saved parameters. Deferred functions
are executed in LIFO order.

	lock(l);
	defer unlock(l);  // unlocking happens before surrounding function returns

	// prints 3 2 1 0 before surrounding function returns
	for i := 0; i <= 3; i++ {
		defer fmt.Print(i);
	}


----

Function declarations
----

A function declaration binds an identifier to a function.
Functions contain declarations and statements.  They may be
recursive. Except for forward declarations (see below), the parameter
and result types of the signature must all be complete types (§Type declarations).

	FunctionDecl = "func" identifier Signature [ Block ] .
	
	func min(x int, y int) int {
		if x < y {
			return x;
		}
		return y;
	}

A function declaration without a block serves as a forward declaration:

	func MakeNode(left, right *Node) *Node


Implementation restrictions: Functions can only be declared at the global level.
A function must be declared or forward-declared before it can be invoked.


Method declarations
----

A method declaration is a function declaration with a receiver. The receiver
is the first parameter of the method, and the receiver type must be specified
as a type name, or as a pointer to a type name. The type specified by the
type name is called ``receiver base type''. The receiver base type must be a
type declared in the current file, and it must not be a pointer type.
The method is said to be ``bound'' to the receiver base type; specifically
it is declared within the scope of that type (§Type declarations). If the
receiver value is not needed inside the method, its identifier may be omitted
in the declaration.

	MethodDecl = "func" Receiver identifier Signature [ Block ] .
	Receiver = "(" [ identifier ] [ "*" ] TypeName ")" .

All methods bound to a receiver base type must have the same receiver type:
Either all receiver types are pointers to the base type or they are the base
type. (TODO: This restriction can be relaxed at the cost of more complicated
assignment rules to interface types).

For instance, given type Point, the declarations

	func (p *Point) Length() float {
		return Math.sqrt(p.x * p.x + p.y * p.y);
	}

	func (p *Point) Scale(factor float) {
		p.x = p.x * factor;
		p.y = p.y * factor;
	}

bind the methods "Length" and "Scale" to the receiver base type "Point".

Method declarations may appear anywhere after the declaration of the receiver
base type and may be forward-declared.


Predeclared functions
----

	cap
	convert
	len
	make
	new
	panic
	panicln
	print
	println
	typeof


TODO: (gri) suggests that we should consider assert() as a built-in function.
It is like panic, but takes a boolean guard as first argument. (rsc also thinks
this is a good idea).


Length and capacity
----

	Call      Argument type        Result

	len(s)    string, *string      string length (in bytes)
	          [n]T, *[n]T          array length (== n)
	          []T, *[]T            slice length
	          map[K]T, *map[K]T    map length
			  chan T               number of elements in channel buffer

	cap(s)    []T, *[]T            capacity of s
	          map[K]T, *map[K]T    capacity of s
			  chan T               channel buffer capacity

TODO: confirm len() and cap() for channels

The type of the result is always "int" and the implementation guarantees that
the result always fits into an "int".

The capacity of a slice or map is the number of elements for which there is
space allocated in the underlying array (for a slice) or map. For a slice "s",
at any time the following relationship holds:

	0 <= len(s) <= cap(s)


Conversions
----

Conversions syntactically look like function calls of the form

	T(value)

where "T" is the type name of an arithmetic type or string (§Basic types),
and "value" is the value of an expression which can be converted to a value
of result type "T".

The following conversion rules apply:

1) Between integer types.  If the value is a signed quantity, it is
sign extended to implicit infinite precision; otherwise it is zero
extended.  It is then truncated to fit in the result type size.
For example, uint32(int8(0xFF)) is 0xFFFFFFFF.  The conversion always
yields a valid value; there is no signal for overflow.

2) Between integer and floating point types, or between floating point
types.  To avoid overdefining the properties of the conversion, for
now it is defined as a ``best effort'' conversion.  The conversion
always succeeds but the value may be a NaN or other problematic
result.  TODO: clarify?

3) Strings permit two special conversions.

3a) Converting an integer value yields a string containing the UTF-8
representation of the integer.

	string(0x65e5)  // "\u65e5"

3b) Converting an array of uint8s yields a string whose successive
bytes are those of the array.  (Recall byte is a synonym for uint8.)

	string([]byte{'h', 'e', 'l', 'l', 'o'}) // "hello"

There is no linguistic mechanism to convert between pointers
and integers. A library may be provided under restricted circumstances
to acccess this conversion in low-level code.

TODO: Do we allow interface/ptr conversions in this form or do they
have to be written as type guards? (§Type guards)


Allocation
----

The built-in function "new" takes a type "T" and returns a value of type "*T".
The memory is initialized as described in the section on initial values
(§Program initialization and execution).

	new(T)

For instance

	type S struct { a int; b float }
	new(S)

dynamically allocates memory for a variable of type S, initializes it
(a=0, b=0.0), and returns a value of type *S pointing to that variable.


TODO Once this has become clearer, connect new() and make() (new() may be
explained by make() and vice versa).


Making slices, maps, and channels
----

The built-in function "make" takes a type "T", optionally followed by a
type-specific list of expressions. It returns a value of type "T". "T"
must be a slice, map, or channel type.
The memory is initialized as described in the section on initial values
(§Program initialization and execution).

	make(T [, optional list of expressions])

For instance

	make(map[string] int)

creates a new map value and initializes it to an empty map.

The only defined parameters affect sizes for allocating slices, maps, and
buffered channels:

	s := make([]int, 10, 100);        # slice with len(s) == 10, cap(s) == 100
	c := make(chan int, 10);          # channel with a buffer size of 10
	m := make(map[string] int, 100);  # map with initial space for 100 elements

TODO Once this has become clearer, connect new() and make() (new() may be
explained by make() and vice versa).


----

Packages
----

A package is a package clause, optionally followed by import declarations,
followed by a series of declarations.

	Package = PackageClause { ImportDecl [ ";" ] } { Declaration [ ";" ] } .

The source text following the package clause acts like a block for scoping
purposes ($Declarations and scope rules).

Every source file identifies the package to which it belongs.
The file must begin with a package clause.

	PackageClause = "package" PackageName .

	package Math


A package can gain access to exported identifiers from another package
through an import declaration:

	ImportDecl = "import" ( ImportSpec | "(" [ ImportSpecList ] ")" ) .
	ImportSpecList = ImportSpec { ";" ImportSpec } [ ";" ] .
	ImportSpec = [ "." | PackageName ] PackageFileName .
	PackageFileName = StringLit .

An import statement makes the exported top-level identifiers of the named
package file accessible to this package.

In the following discussion, assume we have a package in the
file "/lib/math", called package "math", which exports the identifiers
"Sin" and "Cos" denoting the respective trigonometric functions.

In the general form, with an explicit package name, the import
statement declares that package name as an identifier whose
contents are the exported elements of the imported package.
For instance, after

	import M "/lib/math"

the contents of the package /lib/math can be accessed by
"M.Sin", "M.Cos", etc.

In its simplest form, with no package name, the import statement
implicitly uses the imported package name itself as the local
package name.  After

	import "/lib/math"

the contents are accessible by "math.Sin", "math.Cos".

Finally, if instead of a package name the import statement uses
an explicit period, the contents of the imported package are added
to the current package. After

	import . "/lib/math"

the contents are accessible by "Sin" and "Cos".  In this instance, it is
an error if the import introduces name conflicts.

Here is a complete example Go package that implements a concurrent prime sieve:

	package main
	
	// Send the sequence 2, 3, 4, ... to channel 'ch'.
	func generate(ch chan <- int) {
		for i := 2; ; i++ {
			ch <- i  // Send 'i' to channel 'ch'.
		}
	}
	
	// Copy the values from channel 'in' to channel 'out',
	// removing those divisible by 'prime'.
	func filter(in chan <- int, out *<-chan int, prime int) {
		for {
			i := <-in;  // Receive value of new variable 'i' from 'in'.
			if i % prime != 0 {
				out <- i  // Send 'i' to channel 'out'.
			}
		}
	}
	
	// The prime sieve: Daisy-chain filter processes together.
	func sieve() {
		ch := make(chan int);  // Create a new channel.
		go generate(ch);  // Start generate() as a subprocess.
		for {
			prime := <-ch;
			print(prime, "\n");
			ch1 := make(chan int);
			go filter(ch, ch1, prime);
			ch = ch1
		}
	}
	
	func main() {
		sieve()
	}


----

Program initialization and execution
----

When memory is allocated to store a value, either through a declaration
or "new()", and no explicit initialization is provided, the memory is
given a default initialization.  Each element of such a value is
set to the ``zero'' for that type: "false" for booleans, "0" for integers,
"0.0" for floats, '''' for strings, and "nil" for pointers and interfaces.
This intialization is done recursively, so for instance each element of an
array of integers will be set to 0 if no other value is specified.

These two simple declarations are equivalent:

	var i int;
	var i int = 0;

After

	type T struct { i int; f float; next *T };
	t := new(T);

the following holds:

	t.i == 0
	t.f == 0.0
	t.next == nil


A package with no imports is initialized by assigning initial values to
all its global variables in declaration order and then calling any init()
functions defined in its source. Since a package may contain more
than one source file, there may be more than one init() function, but
only one per source file.

Initialization code may contain "go" statements, but the functions
they invoke do not begin execution until initialization of the entire
program is complete. Therefore, all initialization code is run in a single
thread of execution.

Furthermore, an "init()" function cannot be referred to from anywhere
in a program. In particular, "init()" cannot be called explicitly, nor
can a pointer to "init" be assigned to a function variable).

If a package has imports, the imported packages are initialized
before initializing the package itself. If multiple packages import
a package P, P will be initialized only once.

The importing of packages, by construction, guarantees that there can
be no cyclic dependencies in initialization.

A complete program, possibly created by linking multiple packages,
must have one package called main, with a function

	func main() { ...  }

defined.  The function main.main() takes no arguments and returns no
value.

Program execution begins by initializing the main package and then
invoking main.main().

When main.main() returns, the program exits.


----

Systems considerations
----

Package unsafe
----

The special package "unsafe", known to the compiler, provides facilities
for low-level programming including operations that violate the Go type
system. A package using "unsafe" must be vetted manually for type safety.

The package "unsafe" provides (at least) the following package interface:

	package unsafe

	const Maxalign

	type Pointer *any

	func Alignof(variable any) int
	func Offsetof(selector any) int
	func Sizeof(variable any) int

The pseudo type "any" stands for any Go type; "any" is not a type generally
available in Go programs.

Any pointer type as well as values of type "uintptr" can be converted into
an "unsafe.Pointer" and vice versa.

The function "Sizeof" takes an expression denoting a variable of any type
and returns the size of the variable in bytes.

The function "Offsetof" takes a selector (§Selectors) denoting a struct
field of any type and returns the field offset in bytes relative to the
struct address. Specifically, the following condition is satisfied for
a struct "s" with field "f":

	uintptr(unsafe.Pointer(&s)) + uintptr(unsafe.Offsetof(s.f)) ==
	uintptr(unsafe.Pointer(&s.f))

Computer architectures may impose restrictions on the memory addresses accessed
directly by machine instructions. A common such restriction is the requirement
for such addresses to be ``aligned''; that is, addresses must be a multiple
of a factor, the ``alignment''. The alignment depends on the type of datum
accessed.

The function "Alignof" takes an expression denoting a variable of any type
and returns the alignment of the variable in bytes. The following alignment
condition is satisfied for a variable "x":

	uintptr(unsafe.Pointer(&x)) % uintptr(unsafe.Alignof(x)) == 0

The maximum alignment is given by the constant "unsafe.Maxalign".
It usually corresponds to the value of "unsafe.Sizeof(x)" for
a variable "x" of the largest arithmetic type (8 for a float64), but may
be smaller on systems that have less stringent alignment restrictions
or are space constrained.


Size and alignment guarantees
----

For the arithmetic types (§Arithmetic types), a Go compiler guarantees the
following sizes:

	type                      size in bytes

	byte, uint8, int8         1
	uint16, int16             2
	uint32, int32, float32    4
	uint64, int64, float64    8

A Go compiler guarantees the following minimal alignment properties:

1) For a variable "x" of any type: "1 <= unsafe.Alignof(x) <= unsafe.Maxalign".

2) For a variable "x" of arithmetic type: "unsafe.Alignof(x)" is the smaller
   of "unsafe.Sizeof(x)" and "unsafe.Maxalign", but at least 1.

3) For a variable "x" of struct type: "unsafe.Alignof(x)" is the largest of
   all the values "unsafe.Alignof(x.f)" for each field "f" of x, but at least 1.

4) For a variable "x" of array type: "unsafe.Alignof(x)" is the same as
   unsafe.Alignof(x[0]), but at least 1.