After CL 211357 (commit 499dc1c),
hasTests and numDecl were not updated properly for function
declarations with parameters, which affected the whole file
example detection logic. This caused examples like
package foo_test
func Foo(x int) {
}
func Example() {
fmt.Println("Hello, world!")
// Output: Hello, world!
}
to not be detected as whole file ones.
Change-Id: I9ebd47e52d7ee9d91eb6f8e0257511de69b2a402
GitHub-Last-Rev: cc71c31124
GitHub-Pull-Request: golang/go#37730
Reviewed-on: https://go-review.googlesource.com/c/go/+/222477
Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is an attempt to distinguish between a dropped signal and
general builder slowness.
The previous attempt (increasing the settle time to 250ms) still
resulted in a timeout:
https://build.golang.org/log/dd62939f6d3b512fe3e6147074a9c6db1144113f
For #33174
Change-Id: I79027e91ba651f9f889985975f38c7b01d82f634
Reviewed-on: https://go-review.googlesource.com/c/go/+/228266
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This saves 166 KiB for a tls.Dial hello world program (5382441 to
5212356 to bytes), by permitting the linker to remove TLS server code.
Change-Id: I16610b836bb0802b7d84995ff881d79ec03b6a84
Reviewed-on: https://go-review.googlesource.com/c/go/+/228111
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Benchmarking suggests that the combo instruction is notably slower,
at least in the places where we measure.
Updates #37955
Change-Id: I829f1975dd6edf38163128ba51d84604055512f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/228157
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
The types funcAllocInfo and funcInfoSym are no longer referenced.
Fixes#38456.
Change-Id: Icd32445f6027429f4a2781554d2086790ebe5daf
Reviewed-on: https://go-review.googlesource.com/c/go/+/228318
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Float.Sqrt method switches (for performance reasons) between
direct (uses Quo) and inverse (doesn't) computation, depending on the
precision, with threshold 128.
Unfortunately the implementation of recursive division in CL 172018
made Quo slightly slower exactly in the range around and below the
threshold Sqrt is using, so this strategy is no longer profitable.
The new division algorithm allocates more, and this has increased the
amount of allocations performed by Sqrt when using the direct method;
on low precisions the computation is fast, so additional allocations
have an negative impact on performance.
Interestingly, only using the inverse method doesn't just reverse the
effects of the Quo algorithm change, but it seems to make performances
better overall for small precisions:
name old time/op new time/op delta
FloatSqrt/64-4 643ns ± 1% 635ns ± 1% -1.24% (p=0.000 n=10+10)
FloatSqrt/128-4 1.44µs ± 1% 1.02µs ± 1% -29.25% (p=0.000 n=10+10)
FloatSqrt/256-4 1.49µs ± 1% 1.49µs ± 1% ~ (p=0.752 n=10+10)
FloatSqrt/1000-4 3.71µs ± 1% 3.74µs ± 1% +0.87% (p=0.001 n=10+10)
FloatSqrt/10000-4 35.3µs ± 1% 35.6µs ± 1% +0.82% (p=0.002 n=10+9)
FloatSqrt/100000-4 844µs ± 1% 844µs ± 0% ~ (p=0.549 n=10+9)
FloatSqrt/1000000-4 69.5ms ± 0% 69.6ms ± 0% ~ (p=0.222 n=9+9)
name old alloc/op new alloc/op delta
FloatSqrt/64-4 280B ± 0% 200B ± 0% -28.57% (p=0.000 n=10+10)
FloatSqrt/128-4 504B ± 0% 248B ± 0% -50.79% (p=0.000 n=10+10)
FloatSqrt/256-4 344B ± 0% 344B ± 0% ~ (all equal)
FloatSqrt/1000-4 1.30kB ± 0% 1.30kB ± 0% ~ (all equal)
FloatSqrt/10000-4 13.5kB ± 0% 13.5kB ± 0% ~ (p=0.237 n=10+10)
FloatSqrt/100000-4 123kB ± 0% 123kB ± 0% ~ (p=0.247 n=10+10)
FloatSqrt/1000000-4 1.83MB ± 1% 1.83MB ± 3% ~ (p=0.779 n=8+10)
name old allocs/op new allocs/op delta
FloatSqrt/64-4 8.00 ± 0% 5.00 ± 0% -37.50% (p=0.000 n=10+10)
FloatSqrt/128-4 11.0 ± 0% 5.0 ± 0% -54.55% (p=0.000 n=10+10)
FloatSqrt/256-4 5.00 ± 0% 5.00 ± 0% ~ (all equal)
FloatSqrt/1000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/10000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/100000-4 6.00 ± 0% 6.00 ± 0% ~ (all equal)
FloatSqrt/1000000-4 10.3 ±13% 10.3 ±13% ~ (p=1.000 n=10+10)
For example, 1.02µs for FloatSqrt/128 is actually better than what I
was getting on the same machine before the Quo changes.
The .8% slowdown on /1000 and /10000 appears to be real and it is
quite baffling (that codepath was not touched at all); it may be
caused by code alignment changes.
Change-Id: Ib03761cdc1055674bc7526d4f3a23d7a25094029
Reviewed-on: https://go-review.googlesource.com/c/go/+/228062
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This adds support support for the PCALIGN value 32. When this
directive occurs code will be aligned to 32 bytes unless
too many NOPs are needed, and then will fall back to 16
byte alignment.
On Linux the function's alignment is promoted from 16 to 32
in functions where PCALIGN 32 appears. On AIX the function's
alignment is left at 16 due to complexity with modifying its
alignment, which means code will be aligned to at least 16,
possibly 32 at times, which is still good.
Test was updated to accept new value.
Change-Id: I28e72d5f30ca472ed9ba736ddeabfea192d11797
Reviewed-on: https://go-review.googlesource.com/c/go/+/228258
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Begin refactoring dodata to try to convert it from a single giant blob
to something more hierarchical, with descriptive function names for
sub-parts.
Add a state object to hold things like "data" and "dataMaxAlign"
arrays that are used throughout dodata. Extract out the code that
allocates data symbols to sections into a separate method (this
method is still too big, probably needs to be refactored again).
No change in functionality.
Change-Id: I7b52dc2aff0356e7d4b5d6f629d907fd37d3082c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228259
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Fixes#38304
Also change `If m > 0, y < 0, ...` to `If m != 0, y < 0, ...` since `Exp` will return `nil`
whatever `m`'s sign is.
Change-Id: I17d7337ccd1404318cea5d42a8de904ad185fd00
GitHub-Last-Rev: 2399510300
GitHub-Pull-Request: golang/go#38390
Reviewed-on: https://go-review.googlesource.com/c/go/+/228000
Reviewed-by: Robert Griesemer <gri@golang.org>
TestExtraFiles seems to be flaky on GNU/Linux systems when using cgo
because creating a new thread will call malloc which can create a new
arena which can open a file to see how many processors there are.
Try to avoid the flake by creating several new threads at process
startup time.
For #25628
Change-Id: Ie781acdbba475d993c39782fe172cf7f29a05b24
Reviewed-on: https://go-review.googlesource.com/c/go/+/228099
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Hoist dwarfGenerateDebugSyms call up out of dodata to before
loadlibfull. This required a couple of small tweaks to the
loader and to loadlibfull.
Change-Id: I48ffb450d2e48b9e55775b73a6debcd27dbb7b9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228221
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
This is a roll forward of CL 224588 which was rolled back due to
test failures. In this version, the test is in the time package,
not the time/tzdata package. That lets us compare the zip file
to the time/tzdata package, ensuring that we are looking at similar
versions of tzdata information.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: I916d9d8473abe201b897cdc2bbd9168df4ad671c
Reviewed-on: https://go-review.googlesource.com/c/go/+/228101
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
When setting the edge state in register allocation we should only
be setting each register once. It is not possible for a register
to hold multiple values at once.
This CL converts the runtime error seen in #38195 into an internal
compiler error (ICE). It is better for the compiler to fail than
generate an incorrect program.
The bug reported in #38195 is now exposed as:
./parserc.go:459:11: internal compiler error: 'yaml_parser_parse_node': R5 is already set (v1074/v1241)
[stack trace]
Updates #38195.
Change-Id: Id95842fd850b95494cbd472b6fd5a55513ecacec
Reviewed-on: https://go-review.googlesource.com/c/go/+/228060
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When deallocating the input register to a phi so that the phi
itself could be allocated to that register the code was also
deallocating all copies of that phi input value. Those copies
of the value could still be live and if they were the register
allocator could reuse them incorrectly to hold speculative
copies of other phi inputs. This causes strange bugs.
No test because this is a very obscure scenario that is hard
to replicate but CL 228060 adds an assertion to the compiler
that does trigger when running the std tests on linux/s390x
without this CL applied. Hopefully that assertion will prevent
future regressions.
Fixes#38195.
Change-Id: Id975dadedd731c7bb21933b9ea6b17daaa5c9e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/228061
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When inserting Select0 and Select1 ops we need to ensure that they
live in the same block as their argument. This is because they need
to be scheduled immediately after their argument for register and
flag allocation to work correctly.
Fixes#38356.
Change-Id: Iba384dbe87010f1c7c4ce909f08011e5f1de7fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227879
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 228106 moved the position at which we
checked whether a type switch variable had a particular type
from the type switch to the case statement, but only for
single, concrete types. This is a better position,
so this change changes the rest.
Change-Id: I601d4a5c4a0d9400e7804b9f1e729af948349a8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228220
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This lets us provide a better position in its use in swt.go.
Change-Id: I7c0da6bd0adea81acfc9a591e6a01b241a5e0942
Reviewed-on: https://go-review.googlesource.com/c/go/+/228219
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Consider
switch x:= x.(type) {
case int:
// int stmts
case error:
// error stmts
}
Prior to this change, we lowered this roughly as:
if x, ok := x.(int); ok {
// int stmts
} else if x, ok := x.(error); ok {
// error stmts
}
x, ok := x.(error) is implemented with a call to runtime.assertE2I2 or runtime.assertI2I2.
x, ok := x.(int) generates inline code that checks whether x has type int,
and populates x and ok as appropriate. We then immediately branch again on ok.
The shortcircuit pass in the SSA backend is designed to recognize situations
like this, in which we are immediately branching on a bool value
that we just calculated with a branch.
However, the shortcircuit pass has limitations when the intermediate state has phis.
In this case, the phi value is x (the int).
CL 222923 improved the situation, but many cases are still unhandled.
I have further improvements in progress, which is how I found this particular problem,
but they are expensive, and may or may not see the light of day.
In the common case of a lone concrete type in a type switch case,
it is easier and cheaper to simply lower a different way, roughly:
if _, ok := x.(int); ok {
x := x.(int)
// int stmts
}
Instead of using a type assertion, though, we extract the value of x
from the interface directly.
This removes the need to track x (the int) across the branch on ok,
which removes the phi, which lets the shortcircuit pass do its job.
Benchmarks for encoding/binary show improvements, as well as some
wild swings on the super fast benchmarks (alignment effects?):
name old time/op new time/op delta
ReadSlice1000Int32s-8 5.25µs ± 2% 4.87µs ± 3% -7.11% (p=0.000 n=44+49)
ReadStruct-8 451ns ± 2% 417ns ± 2% -7.39% (p=0.000 n=45+46)
WriteStruct-8 412ns ± 2% 405ns ± 3% -1.58% (p=0.000 n=46+48)
ReadInts-8 296ns ± 8% 275ns ± 3% -7.23% (p=0.000 n=48+50)
WriteInts-8 324ns ± 1% 318ns ± 2% -1.67% (p=0.000 n=44+49)
WriteSlice1000Int32s-8 5.21µs ± 2% 4.92µs ± 1% -5.67% (p=0.000 n=46+44)
PutUint16-8 0.58ns ± 2% 0.59ns ± 2% +0.63% (p=0.000 n=49+49)
PutUint32-8 0.87ns ± 1% 0.58ns ± 1% -33.10% (p=0.000 n=46+44)
PutUint64-8 0.66ns ± 2% 0.87ns ± 2% +33.07% (p=0.000 n=47+48)
LittleEndianPutUint16-8 0.86ns ± 2% 0.87ns ± 2% +0.55% (p=0.003 n=47+50)
LittleEndianPutUint32-8 0.87ns ± 1% 0.87ns ± 1% ~ (p=0.547 n=45+47)
LittleEndianPutUint64-8 0.87ns ± 2% 0.87ns ± 1% ~ (p=0.451 n=46+47)
ReadFloats-8 79.8ns ± 5% 75.9ns ± 2% -4.83% (p=0.000 n=50+47)
WriteFloats-8 89.3ns ± 1% 88.9ns ± 1% -0.48% (p=0.000 n=46+44)
ReadSlice1000Float32s-8 5.51µs ± 1% 4.87µs ± 2% -11.74% (p=0.000 n=47+46)
WriteSlice1000Float32s-8 5.51µs ± 1% 4.93µs ± 1% -10.60% (p=0.000 n=48+47)
PutUvarint32-8 25.9ns ± 2% 24.0ns ± 2% -7.02% (p=0.000 n=48+50)
PutUvarint64-8 75.1ns ± 1% 61.5ns ± 2% -18.12% (p=0.000 n=45+47)
[Geo mean] 57.3ns 54.3ns -5.33%
Despite the rarity of type switches, this generates noticeably smaller binaries.
file before after Δ %
addr2line 4413296 4409200 -4096 -0.093%
api 5982648 5962168 -20480 -0.342%
cgo 4854168 4833688 -20480 -0.422%
compile 19694784 19682560 -12224 -0.062%
cover 5278008 5265720 -12288 -0.233%
doc 4694824 4682536 -12288 -0.262%
fix 3411336 3394952 -16384 -0.480%
link 6721496 6717400 -4096 -0.061%
nm 4371152 4358864 -12288 -0.281%
objdump 4760960 4752768 -8192 -0.172%
pprof 14810820 14790340 -20480 -0.138%
trace 11681076 11668788 -12288 -0.105%
vet 8285464 8244504 -40960 -0.494%
total 115824120 115627576 -196544 -0.170%
Compiler performance is marginally improved (note that go/types has many type switches):
name old alloc/op new alloc/op delta
Template 35.0MB ± 0% 35.0MB ± 0% +0.09% (p=0.008 n=5+5)
Unicode 28.5MB ± 0% 28.5MB ± 0% ~ (p=0.548 n=5+5)
GoTypes 114MB ± 0% 114MB ± 0% -0.76% (p=0.008 n=5+5)
Compiler 541MB ± 0% 541MB ± 0% -0.03% (p=0.008 n=5+5)
SSA 1.17GB ± 0% 1.17GB ± 0% ~ (p=0.841 n=5+5)
Flate 21.9MB ± 0% 21.9MB ± 0% ~ (p=0.421 n=5+5)
GoParser 26.9MB ± 0% 26.9MB ± 0% ~ (p=0.222 n=5+5)
Reflect 74.6MB ± 0% 74.6MB ± 0% ~ (p=1.000 n=5+5)
Tar 32.9MB ± 0% 32.8MB ± 0% ~ (p=0.056 n=5+5)
XML 42.4MB ± 0% 42.1MB ± 0% -0.77% (p=0.008 n=5+5)
[Geo mean] 73.2MB 73.1MB -0.15%
name old allocs/op new allocs/op delta
Template 377k ± 0% 377k ± 0% +0.06% (p=0.008 n=5+5)
Unicode 354k ± 0% 354k ± 0% ~ (p=0.095 n=5+5)
GoTypes 1.31M ± 0% 1.30M ± 0% -0.73% (p=0.008 n=5+5)
Compiler 5.44M ± 0% 5.44M ± 0% -0.04% (p=0.008 n=5+5)
SSA 11.7M ± 0% 11.7M ± 0% ~ (p=1.000 n=5+5)
Flate 239k ± 0% 239k ± 0% ~ (p=1.000 n=5+5)
GoParser 302k ± 0% 302k ± 0% -0.04% (p=0.008 n=5+5)
Reflect 977k ± 0% 977k ± 0% ~ (p=0.690 n=5+5)
Tar 346k ± 0% 346k ± 0% ~ (p=0.889 n=5+5)
XML 431k ± 0% 430k ± 0% -0.25% (p=0.008 n=5+5)
[Geo mean] 806k 806k -0.10%
For packages with many type switches, this considerably shrinks function text size.
Some examples:
file before after Δ %
encoding/binary.s 30726 29504 -1222 -3.977%
go/printer.s 77597 76005 -1592 -2.052%
cmd/vendor/golang.org/x/tools/go/ast/astutil.s 65704 63318 -2386 -3.631%
cmd/vendor/golang.org/x/tools/go/analysis/passes/unreachable.s 8047 7714 -333 -4.138%
Text size regressions are rare.
Change-Id: Ic10982bbb04876250eaa5bfee97990141ae5fc28
Reviewed-on: https://go-review.googlesource.com/c/go/+/228106
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
In the dev.link branch we continued developing the new object
file format support and the linker improvements described in
https://golang.org/s/better-linker . Since the last merge, more
progress has been made to improve the new linker.
This is a clean merge, as we already merged master branch to
dev.link first.
Change-Id: I1fef2b1d94bd2410001142da8991544da5ee896d
ascompatee does not generate 'x = x' during return, so we don't have to
check for samelist and disguising special return anymore.
While at it, also remove samelist, as this is the only place it's used.
Passes toolstash-check.
Change-Id: I41c7b077d562aadb5916a61e2ab6229bae3cdef4
Reviewed-on: https://go-review.googlesource.com/c/go/+/227807
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Currently this CL has no effect because V == x.typ in the affected
code. But if we should ever manipulate V (e.g., to support some form
of lazy evaluation of the type), not using V consistently would
lead to a subtle bug.
Change-Id: I465e72d18bbd2b6cd8fcbd746e0d28d14f758c03
Reviewed-on: https://go-review.googlesource.com/c/go/+/228105
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Quote original values passed as substring of ParseError.Message.
Improves the user experience of ParseDuration by making it
quote its original argument, for example:
_, err := time.ParseDuration("for breakfast")
will now produce an error, which when printed out is:
time: invalid duration "for breakfast"
instead of:
time: invalid duration for breakfast
Adapt test cases for format.Parse and format.ParseDuration.
Fixes#38295
Change-Id: Ife322c8f3c859e1e4e8dd546d4cf0d519b4bfa81
Reviewed-on: https://go-review.googlesource.com/c/go/+/227878
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 224588.
Reason for revert: Test failing on secondary platforms.
Change-Id: Ic15fdc73a0d2b860e776733abb82c58809e13160
Reviewed-on: https://go-review.googlesource.com/c/go/+/228200
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- CopyN: 5 creates ambiguity with respect to whitespace and upperbound
- TeeReader less boilerplate and displays a common usage of it
- SectionReader_* all sections unified to 5:17 for clarity
- SectionReader_Seek uses io.Copy to stdout like other examples
- Seeker_Seek remove useless prints
- Pipe print reader like other examples
Updates #36417
Change-Id: Ibd01761d5a5786cdb1ea934f7a98f8302430c8a5
GitHub-Last-Rev: 4c17f9a8e3
GitHub-Pull-Request: golang/go#38379
Reviewed-on: https://go-review.googlesource.com/c/go/+/227868
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We split the output into blocks and write them in parallel. The
block boundary is placed at symbol boundary. In the case of outer
symbols and sub symbols, currently we may split an outer symbol
into two blocks. This will be bad, as the two blocks will have
overlapping address range, since outer symbol and its sub symbols
occupies the same address range.
Make sure we place block boundary only at top-level symbol
boundaries.
Fix boringcrypto build.
Change-Id: I56811d3969c65c6be97672d8e1f1ea36b2447465
Reviewed-on: https://go-review.googlesource.com/c/go/+/227957
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
(cherry picked from commit 636fa3148f)
Reviewed-on: https://go-review.googlesource.com/c/go/+/228138
If -d=ssa/PASS/debug=N is specified (N >= 2) for a rewrite pass
(e.g. lower), when a Value (or Block) is rewritten, print the
Value (or Block) before and after.
For #31915.
Updates #19013.
Change-Id: I80eadd44302ae736bc7daed0ef68529ab7a16776
Reviewed-on: https://go-review.googlesource.com/c/go/+/176718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Importing the time/tzdata package will embed a copy of the IANA
timezone database into the program. This will let the program work
correctly when the timezone database is not available on the system.
It will increase the size of the binary by about 800K.
You can also build a program with -tags timetzdata to embed the
timezone database in the program being built.
Fixes#21881Fixes#38013Fixes#38017
Change-Id: Iffddee72a8f46c95fee3bcde43c142d6899d9246
Reviewed-on: https://go-review.googlesource.com/c/go/+/224588
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Following CL 226818, the compiler will allow inlining a single cycle in
an inline chain. Immediately-recursive functions are still disallowed,
which is what this heuristic refers to.
Add a regression test for this case.
Note that in addition to this check, if the compiler were to inline
multiple cycles via a loop (i.e., rather than appending duplicate code),
much more work would be required here to handle a single address
appearing in multiple different inline frames.
Updates #29737
Change-Id: I88de15cfbeabb9c04381e1c12cc36778623132a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/227346
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
TestTryAdd is particularly brittle because it tests some real cases by
constructing fake sample stack frames. If those frames don't correctly
represent what the runtime would generate then they may fail to catch
regressions.
Instead, call runtime.Callers at the bottom of real function calls to
generate real frames as a base for truncation, etc in tests. Several of
these tests still have to fake parts of the frames to test the right
thing, but this is a bit less fragile.
This change is equivalent to the original
0dfb0513ec (golang.org/cl/227484), except
that the test skips if the test functions aren't inline (e.g., noopt
builders).
Change-Id: Ie9e32b5660cfe28a924f9cfcddcd887ea2effd66
Reviewed-on: https://go-review.googlesource.com/c/go/+/227922
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The parameter name is dt, not t. Also, line-wrap the godoc comment.
Change-Id: Ie012d2a5680525b88e244a3380d72bc4f61da8e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/228058
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matt Layher <mdlayher@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is no longer used. The only remaining use is in generating
Plan 9 debug info, which is already not supported.
Change-Id: Ia023d6f2fa7d57b97ba861ce464e2eec8ac2d1f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/228142
Reviewed-by: Than McIntosh <thanm@google.com>
lib.Textp was used for text address assignment and trampoline
insertion. Now that it has been converted to using the loader,
no need to populate lib.Textp.
Port the logic of canonicalizing dupok symbol's package to the
loader.
unit.Textp was used for DWARF generation, which has also been
converted to using the loader.
Change-Id: I22d4dd30a52a29dd5b1b7b795d43a19f6215e4ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/228140
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Mark nextFreeFast as not inline, as it is too expensive to inline on riscv64.
Also remove riscv64 from non-atomic inline architectures, as we now have
atomic intrisics.
Updates #22239
Change-Id: I6e0e72c1192070e39f065bee486f48df4cc74b35
Reviewed-on: https://go-review.googlesource.com/c/go/+/227808
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
