This work queue is no longer used (there are many reads of
work.partial, but the only write is in putpartial, which is never
called).
Fixes#11922.
Change-Id: I08b76c0c02a0867a9cdcb94783e1f7629d44249a
Reviewed-on: https://go-review.googlesource.com/15892
Reviewed-by: Rick Hudson <rlh@golang.org>
fmt docs say:
If the operand is a reflect.Value, the concrete value it
holds is printed as if it was the operand.
It implies recursive application of this rule, which is not the case.
Clarify the docs.
Change-Id: I019277c7c6439095bab83e5536aa06403638aa51
Reviewed-on: https://go-review.googlesource.com/15952
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also make PIE executables the default build mode, as PIE executables
are required as of Android L.
For #10807
Change-Id: I86b7556b9792105cd2531df1b8f3c8f7a8c5d25c
Reviewed-on: https://go-review.googlesource.com/16055
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
For #10807
Change-Id: Ied826d06cb622edf6413b6f2cdcc46987ab0b05a
Reviewed-on: https://go-review.googlesource.com/16054
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was generating the wrong error message, always defaulting to "500
Internal Server Error", since the err variable used was always nil.
Fixes#12991
Change-Id: I94b0e516409c131ff3b878bcb91e65f0259ff077
Reviewed-on: https://go-review.googlesource.com/16060
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It appears this was made possible by commit 89f185f; before that, g was
not dereferenced above.
Change-Id: I70bc571d924b36351392fd4c13d681e938cfb573
Reviewed-on: https://go-review.googlesource.com/16033
Reviewed-by: Andrew Gerrand <adg@golang.org>
The flate library guarantees that the Reader will never read more
bytes than is necessary. This way, the underlying io.Reader will
be left exactly after the last byte of the DEFLATE stream.
Formats like gzip depend on this behavior being true.
As such, inflate conservatively reads the minimum symbol length in
huffSym leading to many individual calls to moreBits. However, if we
take advantage of the fact that every block *must* end with the EOB
symbol, we can choose to read the length of the EOB symbol.
Since the EOB symbol is also the most rare symbol (occuring exactly
once) in a block, we can hypothesize that it is almost as long as
the max symbol length, allowing huffSym to ask for more bits at the
start of every loop. This increases the probabilty that the Huffman
code is decoded on the first iteration of the outer for-loop.
benchmark old MB/s new MB/s speedup
BenchmarkDecodeDigitsSpeed1e4-4 51.05 54.31 1.06x
BenchmarkDecodeDigitsSpeed1e5-4 58.86 62.24 1.06x
BenchmarkDecodeDigitsSpeed1e6-4 59.63 63.13 1.06x
BenchmarkDecodeDigitsDefault1e4-4 51.94 54.61 1.05x
BenchmarkDecodeDigitsDefault1e5-4 63.70 69.13 1.09x
BenchmarkDecodeDigitsDefault1e6-4 66.08 71.43 1.08x
BenchmarkDecodeDigitsCompress1e4-4 52.25 54.56 1.04x
BenchmarkDecodeDigitsCompress1e5-4 63.34 68.30 1.08x
BenchmarkDecodeDigitsCompress1e6-4 66.84 70.64 1.06x
BenchmarkDecodeTwainSpeed1e4-4 50.74 53.40 1.05x
BenchmarkDecodeTwainSpeed1e5-4 60.77 67.03 1.10x
BenchmarkDecodeTwainSpeed1e6-4 62.08 69.78 1.12x
BenchmarkDecodeTwainDefault1e4-4 53.45 56.40 1.06x
BenchmarkDecodeTwainDefault1e5-4 73.54 79.05 1.07x
BenchmarkDecodeTwainDefault1e6-4 77.68 83.65 1.08x
BenchmarkDecodeTwainCompress1e4-4 53.21 56.15 1.06x
BenchmarkDecodeTwainCompress1e5-4 73.82 77.76 1.05x
BenchmarkDecodeTwainCompress1e6-4 79.23 83.30 1.05x
Change-Id: Ie194925c827988a380b8c2fdd13b13c4faa5d397
Reviewed-on: https://go-review.googlesource.com/15651
Reviewed-by: Nigel Tao <nigeltao@golang.org>
PIC code on ppc64le uses R2 as a TOC pointer and when calling a function
through a function pointer must ensure the function pointer is in R12. These
rules are easy enough to follow unconditionally in our assembly, so do that.
Change-Id: Icfc4e47ae5dfbe15f581cbdd785cdeed6e40bc32
Reviewed-on: https://go-review.googlesource.com/15526
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Shared libraries on ppc64le will require a larger minimum stack frame (because
the ABI mandates that the TOC pointer is available at 24(R1)). Part 3 of that
is using a #define in the ppc64 assembly to refer to the size of the fixed
part of the stack (finding all these took me about a week!).
Change-Id: I50f22fe1c47af1ec59da1bd7ea8f84a4750df9b7
Reviewed-on: https://go-review.googlesource.com/15525
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Shared libraries on ppc64le will require a larger minimum stack frame (because
the ABI mandates that the TOC pointer is available at 24(R1)). Part 2a of
preparing for that is to have all bits of arch-independent and ppc64-specific
codegen that need to know call a function to find out.
Change-Id: I55899f73037e92227813c491049a3bd6f30bd41f
Reviewed-on: https://go-review.googlesource.com/15524
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Shared libraries on ppc64le will require a larger minimum stack frame (because
the ABI mandates that the TOC pointer is available at 24(R1)). So to prepare
for this, make a constant for the fixed part of a stack and use that where
necessary.
Change-Id: I447949f4d725003bb82e7d2cf7991c1bca5aa887
Reviewed-on: https://go-review.googlesource.com/15523
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replace the confusing game where a frame size of $-8 would suppress the
implicit setting up of a stack frame with a nice explicit flag.
The code to set up the function prologue is still a little confusing but better
than it was.
Change-Id: I1d49278ff42c6bc734ebfb079998b32bc53f8d9a
Reviewed-on: https://go-review.googlesource.com/15670
Reviewed-by: Minux Ma <minux@golang.org>
Go cannot allow lazy PLT resolution when calling between Go functions because
the lazy resolution can use more stack than is available. Lazy resolution is
disabled by passing -z now to the system linker, but unfortunately was only
passed when linking to a Go shared library. That sounds fine, but the shared
library containing the runtime is not linked to any other Go shared library but
calls main.init and main.main via a PLT, and before this fix this did use lazy
resolution. (For some reason this never caused a problem on intel, but it
breaks on ppc64le). Fortunately the fix is very simple: always pass -z now to
the system linker when dynamically linking Go.
Change-Id: I7806d40aac80dcd1e56b95864d1cfeb1c42614e2
Reviewed-on: https://go-review.googlesource.com/15870
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current http client doesn't support Expect: 100-continue request
header(RFC2616-8/RFC7231-5.1.1). So even if the client have the header,
the head of the request body is consumed prematurely.
Those are my intentions to avoid premature consuming body in this change.
- If http.Request header contains body and Expect: 100-continue
header, it blocks sending body until it gets the first response.
- If the first status code to the request were 100, the request
starts sending body. Otherwise, sending body will be cancelled.
- Tranport.ExpectContinueTimeout specifies the amount of the time to
wait for the first response.
Fixes#3665
Change-Id: I4c04f7d88573b08cabd146c4e822061764a7cd1f
Reviewed-on: https://go-review.googlesource.com/10091
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#7782Fixes#9554
Updates #7237 (original metabug, before we switched to specific bugs)
Updates #11932 (plan9 still doesn't have net I/O deadline support)
Change-Id: I96f311b88b1501d884ebc008fd31ad2cf1e16d75
Reviewed-on: https://go-review.googlesource.com/15941
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In net/parse.go we reimplement bytes.IndexByte and strings.IndexByte,
However those are implemented in runtime/$GOARCH_asm.s.
Using versions from runtime should provide performance advantage,
and keep the same code together.
Change-Id: I6212184bdf6aa1f2c03ce26d4b63f5b379d8ed0c
Reviewed-on: https://go-review.googlesource.com/15953
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A TODO to merge is removed from panic1.go.
The rest is appended to panic.go
Updates #12952
Change-Id: Ied4382a455abc20bc2938e34d031802e6b4baf8b
Reviewed-on: https://go-review.googlesource.com/15905
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Previously with db.maxOpen > 0, db.maxOpen+n failed connection attempts
started concurrently could result in a deadlock. DB.conn and
DB.openNewConnection did not trigger the DB.connectionOpener go routine
after a failed connection attempt. This omission could leave go routines
waiting for DB.connectionOpener forever.
In addition the logic to track the state of the pool was inconsistent.
db.numOpen was sometimes incremented optimistically and sometimes not.
This change harmonizes the logic and eliminates the db.pendingOpens
variable, making the logic easier to understand and maintain.
Fixes#10886
Change-Id: I983c4921a3dacfbd531c3d7f8d2da8a592e9922a
Reviewed-on: https://go-review.googlesource.com/14547
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
os/signal depends on a few unexported runtime functions. This removes the
assembly stubs it used to get access to these in favour of using
//go:linkname in runtime to make the functions accessible to os/signal.
This is motivated by ppc64le shared libraries, where you cannot BR to a symbol
defined in a shared library (only BL), but it seems like an improvment anyway.
Change-Id: I09361203ce38070bd3f132f6dc5ac212f2dc6f58
Reviewed-on: https://go-review.googlesource.com/15871
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
This isn't C anymore. No binary change to pkg/linux_amd64/runtime.a.
Change-Id: I24d66b0f5ac888f432b874aac684b1395e7c8345
Reviewed-on: https://go-review.googlesource.com/15903
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Apply static bounds checking logic during type checking even to
zero-element arrays, but skip synthesized OINDEX nodes that the
compiler has asserted are within bounds (such as the ones generated
while desugaring ORANGE nodes). This matches the logic in walkexpr
that also skips static bounds checking when Bounded is true.
Passes toolstash/buildall.
Fixes#12944.
Change-Id: I14ba03d71c002bf969d69783bec8d1a8e10e7d75
Reviewed-on: https://go-review.googlesource.com/15902
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No functional change and passes toolstash/buildall, but eliminates a
13-deep nesting of if statements.
Change-Id: I32e63dcf358c6eb521935f4ee07fbe749278e5ef
Reviewed-on: https://go-review.googlesource.com/15901
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Read what a non-empty interface points to.
The deleted lines were added in https://codereview.appspot.com/4810060/,
which attempted to break an infinite loop. That was a long time ago.
If I just delete these lines with current codebase, the test "bug1"
(added in that CL) does not fail.
All new tests fail without this fix.
Fixes#12924
Change-Id: I9370ca44facd6af3019850aa065b936e5a482d37
Reviewed-on: https://go-review.googlesource.com/15809
Reviewed-by: Andrew Gerrand <adg@golang.org>
As specified by RFC 2047 section 2, encoded-words may not be more than
75 characters long.
We only enforce this rule when the charset is UTF-8, since multi-bytes
characters must not be split accross encoded-words (see section 5.3).
Fixes#12300
Change-Id: I72a43fc3fe6ddeb3dab54dcdce0837d7ebf658f0
Reviewed-on: https://go-review.googlesource.com/14957
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The clues to this were already there, but as a user I was still unsure.
Make this more explicit.
Change-Id: I68564f3498dcd4897772a303588f03a6b65f111d
Reviewed-on: https://go-review.googlesource.com/15172
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As correctly mentioned in #11883, encodeState.string and
encodeState.stringBytes never return an error.
This CL removes the error from the function signatures and somewhat
simplifies call sites.
Fixes#11883
Change-Id: I1d1853d09631c545b68b5eea86ff7daa2e0ca10b
Reviewed-on: https://go-review.googlesource.com/15836
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This enables HTTP/2 by default (for https only) if the user didn't
configure anything in their NPN/ALPN map. If they're using SPDY or an
alternate http2 or a newer http2 from x/net/http2, we do nothing
and don't use the standard library's vendored copy of x/net/http2.
Upstream remains golang.org/x/net/http2.
Update #6891
Change-Id: I69a8957a021a00ac353f9d7fdb9a40a5b69f2199
Reviewed-on: https://go-review.googlesource.com/15828
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The PROXY protocol is supported by several proxy servers such as haproxy
and Amazon ELB. This protocol allows services running behind a proxy to
learn the remote address of the actual client connecting to the proxy,
by including a single textual line at the beginning of the TCP
connection.
http://www.haproxy.org/download/1.5/doc/proxy-protocol.txt
There are several Go libraries for this protocol (such as
https://github.com/armon/go-proxyproto), which operate by wrapping a
net.Conn with an implementation whose RemoteAddr method reads the
protocol line before returning. This means that RemoteAddr is a blocking
call.
Before this change, http.Serve called RemoteAddr from the main Accepting
goroutine, not from the per-connection goroutine. This meant that it
would not Accept another connection until RemoteAddr returned, which is
not appropriate if RemoteAddr needs to do a blocking read from the
socket first.
Fixes#12943.
Change-Id: I1a242169e6e4aafd118b794e7c8ac45d0d573421
Reviewed-on: https://go-review.googlesource.com/15835
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allow all CGI environment settings from the inherited set and default
inherited set to be overridden including PATH by Env.
Change-Id: Ief8d33247b879fa87a8bfd6416d4813116db98de
Reviewed-on: https://go-review.googlesource.com/14959
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The current fastlog2 testing checks all 64M values in the domain of
interest, which is too much for platforms with no native floating point.
Reduce testing under testing.Short() to speed up builds for those platforms.
Related to #12620
Change-Id: Ie5dcd408724ba91c3b3fcf9ba0dddedb34706cd1
Reviewed-on: https://go-review.googlesource.com/15830
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Joel Sing <jsing@google.com>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The documentation listing err == EOF can be confusing to newcomers
to the language who are looking for the relevant documentation for
that error.
Change-Id: I301885950d0e1d0fbdf3a1892fca86eac7a0c616
Reviewed-on: https://go-review.googlesource.com/15806
Reviewed-by: Andrew Gerrand <adg@golang.org>
Due to #9401, trailing empty fields will occupy at least 1 byte
of space.
Fixes#12884.
Change-Id: I838d3f1a73637e526f5a6dbc348981227d5bb2fd
Reviewed-on: https://go-review.googlesource.com/15660
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also, handle the case where 'read' returns EINVAL instead of EBADF
when the descriptor is not ready. (android 4.4.4/cyanogenmod, nexus7)
Change-Id: I56c5949d27303d44a4fd0de38951b85e20cef167
Reviewed-on: https://go-review.googlesource.com/15810
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes these warnings from go vet:
buildid_linux.go:25: no formatting directive in Fatalf call
callback.go:180: arg pc[i] for printf verb %p of wrong type: uintptr
env.go:34: possible misuse of unsafe.Pointer
issue7665.go:22: possible misuse of unsafe.Pointer
Change-Id: I83811b9c10c617139713a626b4a34ab05564d4fe
Reviewed-on: https://go-review.googlesource.com/15802
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The duplication of _Kind and kind constants is a legacy of the
conversion from C.
Change-Id: I368b35a41f215cf91ac4b09dac59699edb414a0e
Reviewed-on: https://go-review.googlesource.com/15800
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
