Replaces legacy Go syntax for pointer struct member access
with more modern auto-deref alternative.
Found using https://go-critic.github.io/overview#underef-ref
Change-Id: I71a3c424126c4ff5d89f9e4bacb6cc01c6fa2ddf
Reviewed-on: https://go-review.googlesource.com/122895
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Replace `x[:]` where x is a slice with just `x`.
Found using https://go-critic.github.io/overview.html#unslice-ref
Change-Id: Ib0ee16e1d49b2a875b6b92a770049acc33208362
Reviewed-on: https://go-review.googlesource.com/123375
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The workthegc function was being inlined, and the slice did not
escape, so there was no memory allocation. Use a sink variable to
force memory allocation, at least for now.
Fixes#23343
Change-Id: I02f4618e343c8b6cb552cb4e9f272e112785f7cf
Reviewed-on: https://go-review.googlesource.com/122576
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The implementation of cputicks has been wrong for ppc64x. The
previous code sequence is for 32 bit, not 64 bit.
Change-Id: I308ae6cf9131f53a0100cd3f8ae4e16601f2d553
Reviewed-on: https://go-review.googlesource.com/129595
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The hasprefix function is redundant and can be removed since it has
the same implementation as hasPrefix modulo variable names.
Fixes#25688
Change-Id: I499cc24a2b5c38d1301718a4e66f555fd138386f
Reviewed-on: https://go-review.googlesource.com/115835
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
First, use a dummy slice access on decode64 and decode32 to ensure that
there is a single bounds check for src.
Second, move the PutUint64/PutUint32 calls out of these functions,
meaning that they are simpler and smaller. This may also open the door
to inlineability in the future, but for now, they both go past the
budget.
While at it, get rid of the ilen and olen variables, which have no
impact whatsoever on performance. At least, not measurable by any of the
benchmarks.
name old time/op new time/op delta
DecodeString/2-4 54.3ns ± 1% 55.2ns ± 2% +1.60% (p=0.017 n=5+6)
DecodeString/4-4 66.6ns ± 1% 66.8ns ± 2% ~ (p=0.903 n=6+6)
DecodeString/8-4 79.3ns ± 2% 79.6ns ± 1% ~ (p=0.448 n=6+6)
DecodeString/64-4 300ns ± 1% 281ns ± 3% -6.54% (p=0.002 n=6+6)
DecodeString/8192-4 27.4µs ± 1% 23.7µs ± 2% -13.47% (p=0.002 n=6+6)
name old speed new speed delta
DecodeString/2-4 73.7MB/s ± 1% 72.5MB/s ± 2% -1.55% (p=0.026 n=5+6)
DecodeString/4-4 120MB/s ± 1% 120MB/s ± 2% ~ (p=0.851 n=6+6)
DecodeString/8-4 151MB/s ± 2% 151MB/s ± 1% ~ (p=0.485 n=6+6)
DecodeString/64-4 292MB/s ± 1% 313MB/s ± 3% +7.03% (p=0.002 n=6+6)
DecodeString/8192-4 399MB/s ± 1% 461MB/s ± 2% +15.58% (p=0.002 n=6+6)
For #19636.
Change-Id: I0dfbdafa2a41dc4c582f63aef94b90b8e473731c
Reviewed-on: https://go-review.googlesource.com/113776
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Tests in test/safe were neglected after moving to the run.go
framework. This change restores them.
These tests are skipped for go/types via -+ option.
Fixes#25668
Change-Id: I8fe26574a76fa7afa8664c467d7c2e6334f1bba9
Reviewed-on: https://go-review.googlesource.com/124660
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When existing data in buffer does not have delimiter,
and new data is added with b.fill(), continue search from
previous point instead of starting from beginning.
Change-Id: Id78332afe2b0281b4a3c86bd1ffe9449cfea7848
GitHub-Last-Rev: 08e7d2f501
GitHub-Pull-Request: golang/go#25441
Reviewed-on: https://go-review.googlesource.com/113535
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also adjust some comments to where they belong.
Change-Id: Ifbb38052401b0d33d7bb9800f56a20ce8f39c25f
Reviewed-on: https://go-review.googlesource.com/127761
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
As per commit aa0ae75, handling of io.ErrShortWrite is done in
*File.Write() itself.
Change-Id: I92924b51e8df2ae88e6e50318348f44973addba8
Reviewed-on: https://go-review.googlesource.com/113696
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These are artifacts originating from C->Go translation.
Change-Id: Ib5cdcaf42f43f3968482892fb4945e19ef38bd6d
Reviewed-on: https://go-review.googlesource.com/121795
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Some WriteByte('\\') calls can be deduplicated.
fillField is used in two occasions, but it is unnecessary when adding
fields to the "next" stack, as those aren't used for the final encoding.
Inline the func with its only remaining call.
Finally, unindent a default-if block.
The performance of the encoder is unaffected:
name old time/op new time/op delta
CodeEncoder-4 6.65ms ± 1% 6.65ms ± 0% ~ (p=0.662 n=6+5)
Change-Id: Ie55baeab89abad9b9f13e9f6ca886a670c30dba9
Reviewed-on: https://go-review.googlesource.com/122461
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A number of explicit function literals found through the
unlambda linter are removed.
Fixes#26802
Change-Id: I0b122bdd95e9cb804c77efe20483fdf681c8154e
Reviewed-on: https://go-review.googlesource.com/127756
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
This function was only used in a single place - in the field encoding
loop within the struct encoder.
Inlining the function call manually lets us get rid of the call
overhead. But most importantly, it lets us simplify the logic afterward.
We no longer need to use reflect.Value{} and !fv.IsValid(), as we can
skip the field immediately.
The two factors combined (mostly just the latter) give a moderate speed
improvement to this hot loop.
name old time/op new time/op delta
CodeEncoder-4 6.01ms ± 1% 5.91ms ± 1% -1.66% (p=0.002 n=6+6)
name old speed new speed delta
CodeEncoder-4 323MB/s ± 1% 328MB/s ± 1% +1.69% (p=0.002 n=6+6)
Updates #5683.
Change-Id: I12757c325a68abb2856026cf719c122612a1f38e
Reviewed-on: https://go-review.googlesource.com/125417
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
structEncoder had two slices - the list of fields, and a list containing
the encoder for each field. structEncoder.encode then looped over the
fields, and indexed into the second slice to grab the field encoder.
However, this makes it very hard for the compiler to be able to prove
that the two slices always have the same length, and that the index
expression doesn't need a bounds check.
Merge the two slices into one to completely remove the need for bounds
checks in the hot loop.
While at it, don't copy the field elements when ranging, which greatly
speeds up the hot loop in structEncoder.
name old time/op new time/op delta
CodeEncoder-4 6.18ms ± 0% 5.56ms ± 0% -10.08% (p=0.002 n=6+6)
name old speed new speed delta
CodeEncoder-4 314MB/s ± 0% 349MB/s ± 0% +11.21% (p=0.002 n=6+6)
name old alloc/op new alloc/op delta
CodeEncoder-4 93.2kB ± 0% 62.1kB ± 0% -33.33% (p=0.002 n=6+6)
Updates #5683.
Change-Id: I0dd47783530f439b125e084aede09dda172eb1e8
Reviewed-on: https://go-review.googlesource.com/125416
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The unexported field is hidden from reflect based marshalers, which
would break otherwise. Also, make it return an error, as there are
multiple reasons it might fail.
Fixes#27125
Change-Id: I92adade2fe456103d2d5c0315629ca0256953764
Reviewed-on: https://go-review.googlesource.com/130535
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since the 12.x branch, the getrandom syscall had been introduced
with similar interface as Linux's and consistent syscall id
across architectures.
Change-Id: I63d6b45dbe9e29f07f1b5b6c2ec8be4fa624b9ee
GitHub-Last-Rev: 6fb76e6522
GitHub-Pull-Request: golang/go#25976
Reviewed-on: https://go-review.googlesource.com/120055
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
_GoStringLen performs an implicit conversion from intgo to size_t.
Explicitly cast to size_t.
This change avoids warnings when using cgo with CFLAGS:
-Wconversion.
Change-Id: I58f75a35e17f669a67f9805061c041b03eddbb5c
GitHub-Last-Rev: b5df1ac0c3
GitHub-Pull-Request: golang/go#27092
Reviewed-on: https://go-review.googlesource.com/129820
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
time.Parse currently rejects numeric timezones names with UTC offsets
bigger than +12, but this is incorrect: there's a +13 timezone and a
+14 timezone:
$ zdump Pacific/Kiritimati
Pacific/Kiritimati Mon Jun 25 02:15:03 2018 +14
For convenience, this cl changes the ranges of accepted offsets from
-14..+12 to -23..+23 (zero still excluded), i.e. every possible offset
that makes sense. We don't validate three-letter abbreviations for the
timezones names, so there's no need to be too strict on numeric names.
This change also fixes a bug in the parseTimeZone, that is currently
unconditionally returning true (i.e. valid timezone), without checking
the value returned by parseSignedOffset.
This fixes 5 of 17 time.Parse() failures listed in Issue #26032.
Updates #26032
Change-Id: I2f08ca9aa41ea4c6149ed35ed2dd8f23eeb42bff
Reviewed-on: https://go-review.googlesource.com/120558
Reviewed-by: Rob Pike <r@golang.org>
Ceil and Trunc of -0.2 return -0, not +0, but we didn't test that.
Updates #23647
Change-Id: Idbd4699376abfb4ca93f16c73c114d610d86a9f2
Reviewed-on: https://go-review.googlesource.com/91335
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Enable the Go linker to generate executables for windows/arm.
Generates PE relocation tables, which are used by Windows to
dynamically relocate the Go binary in memory. Windows on ARM
requires all modules to be relocatable, unlike x86/amd64 which are
permitted to have fixed base addresses.
Updates #26148
Change-Id: Ie63964ff52c2377e121b2885e9d05ec3ed8dc1cd
Reviewed-on: https://go-review.googlesource.com/125648
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We are currently using go:linkname for some algorithms from
strings/bytes packages, to avoid importing strings/bytes.
But strings/bytes are just wrappers around internal/bytealg, so
we should use internal/bytealg directly.
Change-Id: I2836f779b88bf8876d5fa725043a6042bdda0390
Reviewed-on: https://go-review.googlesource.com/130515
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use the same load order in big4 as in encoding/binary.BigEndian.
This order is recognized by the compiler and converted into single load.
This isn't in the hot path, but doesn't hurt readability, so lets do this.
Change-Id: Ib1240d0b278e9d667ad419fe91fa52b23d28cfc0
Reviewed-on: https://go-review.googlesource.com/130478
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reuse v.Type() and cachedTypeFields(t) when decoding maps and structs.
Always use the same data slices when in hot loops, to ensure that the
compiler generates good code. "for i < len(data) { use(d.data[i]) }"
makes it harder for the compiler.
Finally, do other minor clean-ups, such as deduplicating switch cases,
and using a switch instead of three chained ifs.
The decoder sees a noticeable speed-up, in particular when decoding
structs.
name old time/op new time/op delta
CodeDecoder-4 29.8ms ± 1% 27.5ms ± 0% -7.83% (p=0.002 n=6+6)
name old speed new speed delta
CodeDecoder-4 65.0MB/s ± 1% 70.6MB/s ± 0% +8.49% (p=0.002 n=6+6)
Updates #5683.
Change-Id: I9d751e22502221962da696e48996ffdeb777277d
Reviewed-on: https://go-review.googlesource.com/122468
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Calling Name on a reflect.Type is somewhat expensive, as it involves a
number of nested calls and string handling.
This cost was showing up when decoding structs, as we were calling it to
set up an error context.
We can avoid the extra work unless we do encounter an error, which makes
decoding via struct types faster.
name old time/op new time/op delta
CodeDecoder-4 31.0ms ± 1% 29.9ms ± 1% -3.69% (p=0.002 n=6+6)
name old speed new speed delta
CodeDecoder-4 62.6MB/s ± 1% 65.0MB/s ± 1% +3.83% (p=0.002 n=6+6)
Updates #5683.
Change-Id: I48a3a85ef0ba96f524b7c3e9096cb2c4589e077a
Reviewed-on: https://go-review.googlesource.com/122467
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use the binary.{Big,Little}Endian integer encoding methods rather
than unsafe or local implementations. These methods are tested to
ensure they inline correctly and don't add unnecessary bounds checks,
so it seems better to use them wherever possible.
This introduces a dependency on encoding/binary to crypto/cipher. I
think this is OK because other "L3" packages already import
encoding/binary.
Change-Id: I5cf01800d08554ca364e46cfc1d9445cf3c711a0
Reviewed-on: https://go-review.googlesource.com/115555
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
gofmt's TestAll runs gofmt on all the go files in the tree and checks,
among other things, that gofmt is idempotent (i.e. that a second
invocation does not change the input again).
There's a known bug of gofmt not being idempotent (Issue #24472), and
unfortunately the fixedbugs/issue22662.go file triggers it. We can't
just gofmt the file, because it tests the effect of various line
directives inside weirdly-placed comments, and gofmt moves those
comments, making the test useless.
Instead, just skip the idempotency check when gofmt-ing the
problematic file.
This fixes go test on the cmd/gofmt package, and a failure seen on the
longtest builder.
Updates #24472
Change-Id: Ib06300977cd8fce6c609e688b222e9b2186f5aa7
Reviewed-on: https://go-review.googlesource.com/130377
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The runtime package already imports the internal/cpu package, so there
is no reason for it to use go:linkname comments to refer to
internal/cpu functions and variables. Since internal/cpu is internal,
we can just export those names. Removing the obscurity of go:linkname
outweighs the minor additional complexity added to the internal/cpu API.
Change-Id: Id89951b7f3fc67cd9bce67ac6d01d44a647a10ad
Reviewed-on: https://go-review.googlesource.com/128755
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
As discussed in CL 126621, these constants are already defined on Linux,
Darwin, FreeBSD and NetBSD. In order to ensure portability of existing
code using the syscall package, provide them for Solaris as well.
Change-Id: Id49f6991f36775b152b9c47b9923cd0a08053bcb
Reviewed-on: https://go-review.googlesource.com/130356
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As discussed in CL 126621, these constants are already defined on Linux,
Darwin, FreeBSD and NetBSD. In order to ensure portability of existing
code using the syscall package, provide them for OpenBSD (and
DragonflyBSD, in a separate CL) as well.
Change-Id: Ia9e07cb01f989d144a620d268daa8ec946788861
Reviewed-on: https://go-review.googlesource.com/130336
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
