Buildmode c-archive now supports position independent code for
darwin/arm (in addition to darwin/arm64). Make PIC (-shared) the
default for both platforms in the default buildmode.
Without this change, gomobile will go install the standard library
into its separate package directory without PIC support.
Also add -shared to darwin/arm64 in buildmode c-archive, for
symmetry (darwin/arm64 always generates position independent code).
Fixes#15519
Change-Id: If27d2cbea8f40982e14df25da2703cbba572b5c6
Reviewed-on: https://go-review.googlesource.com/22920
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The boolean destination in an OAS2DOTTYPE expression craps out during
compilation when trying to assign to a map entry because, unlike slice entries,
map entries are not directly addressable in memory. The solution is to
properly order the boolean destination node so that map entries are set
via autotmp variables.
Fixes#14678
Change-Id: If344e8f232b5bdac1b53c0f0d21eeb43ab17d3de
Reviewed-on: https://go-review.googlesource.com/22833
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In issue #13992, Russ mentioned that the heap bitmap footprint was
halved but that the bitmap size calculation hadn't been updated. This
presents the opportunity to either halve the bitmap size or double
the addressable virtual space. This CL doubles the addressable virtual
space. On 32 bit this can be tweaked further to allow the bitmap to
cover the entire 4GB virtual address space, removing a failure mode
if the kernel hands out memory with a too low address.
First, fix the calculation and double _MaxArena32 to cover 4GB virtual
memory space with the same bitmap size (256 MB).
Then, allow the fallback mode for the initial memory reservation
on 32 bit (or 64 bit with too little available virtual memory) to not
include space for the arena. mheap.sysAlloc will automatically reserve
additional space when the existing arena is full.
Finally, set arena_start to 0 in 32 bit mode, so that any address is
acceptable for subsequent (additional) reservations.
Before, the bitmap was always located just before arena_start, so
fix the two places relying on that assumption: Point the otherwise unused
mheap.bitmap to one byte after the end of the bitmap, and use it for
bitmap addressing instead of arena_start.
With arena_start set to 0 on 32 bit, the cgoInRange check is no longer a
sufficient check for Go pointers. Introduce and call inHeapOrStack to
check whether a pointer is to the Go heap or stack.
While we're here, remove sysReserveHigh which seems to be unused.
Fixes#13992
Change-Id: I592b513148a50b9d3967b5c5d94b86b3ec39acc2
Reviewed-on: https://go-review.googlesource.com/20471
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The old code assumed that the thread ID set by pthread_create would be
available in the newly created thread. While that is clearly true
eventually, it is not necessarily true immediately. Rather than try to
pass down the thread ID, just call pthread_self in the created thread.
Fixes#15576 (I hope).
Change-Id: Ic07086b00e4fd5676c04719a299c583320da64a1
Reviewed-on: https://go-review.googlesource.com/22880
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Might deflake the occasional linux-amd64-race failures.
Change-Id: I273b0e32bb92236168eb99887b166e079799c1f1
Reviewed-on: https://go-review.googlesource.com/22858
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Ice9c234960adc7857c8370b777a0b18e29d59281
Reviewed-on: https://go-review.googlesource.com/22853
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We run the external network tests on builders, but some of our
builders have less-than-ideal DNS connectivity. This change continues
to run the tests on all builders, but marks certain builders as flaky
(network-wise), and only validates their DNS results if they got DNS
results.
Change-Id: I826dc2a6f6da55add89ae9c6db892b3b2f7b526b
Reviewed-on: https://go-review.googlesource.com/22852
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I meant to delete these in CL 22850, actually.
Change-Id: I0c286efd2b9f1caf0221aa88e3bcc03649c89517
Reviewed-on: https://go-review.googlesource.com/22851
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is the follow-on to CL 22610: now that it's the child instead of
the parent which lists unwanted fds to close in syscall.StartProcess,
plan9 no longer needs the ForkLock to protect the list from changing.
The readdupdevice function is also now unused and can be removed.
Change-Id: I904c8bbf5dbaa7022b0f1a1de0862cd3064ca8c7
Reviewed-on: https://go-review.googlesource.com/22842
Reviewed-by: David du Colombier <0intro@gmail.com>
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that darwin/arm supports position independent code, allow the
binaries generated by the c-archive tests be position independent
(PIE) as well.
Change-Id: If0517f06e92349ada29a4e3e0a951f08b0fcc710
Reviewed-on: https://go-review.googlesource.com/22841
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Accidentally checked in the version of file c.go that doesn't
exhibit the bug - hence the test was not testing the bug fix.
Double-checked that this version exposes the bug w/o the fix.
Change-Id: Ie4dc455229d1ac802a80164b5d549c2ad4d971f5
Reviewed-on: https://go-review.googlesource.com/22837
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Fixes#12272
Change-Id: I2115ec62ed4061084c482eb385a583a1c1909888
Reviewed-on: https://go-review.googlesource.com/22838
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
The Reader and Writer have hard-coded constants regarding the
offsets and lengths of certain fields in the tar format sprinkled
all over. This makes it harder to verify that the offsets are
correct since a reviewer would need to search for them throughout
the code. Instead, all information about the layout of header
fields should be centralized in one single file. This has the
advantage of being both centralized, and also acting as a form
of documentation about the header struct format.
This method was chosen over using "encoding/binary" since that
method would cause an allocation of a header struct every time
binary.Read was called. This method causes zero allocations and
its logic is no longer than if structs were declared.
Updates #12594
Change-Id: Ic7a0565d2a2cd95d955547ace3b6dea2b57fab34
Reviewed-on: https://go-review.googlesource.com/14669
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This can only happen when profiling and there is foreign code
at the top of the g0 stack but we're not in cgo.
That in turn only happens with the race detector.
Fixes#13568.
Change-Id: I23775132c9c1a3a3aaae191b318539f368adf25e
Reviewed-on: https://go-review.googlesource.com/18322
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL/19862 (f79b50b8d5) recently introduced the constants
SeekStart, SeekCurrent, and SeekEnd to the io package. We should use these constants
consistently throughout the code base.
Updates #15269
Change-Id: If7fcaca7676e4a51f588528f5ced28220d9639a2
Reviewed-on: https://go-review.googlesource.com/22097
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Negative-case conversion code was wrong for minimum int32,
used negate-then-widen instead of widen-then-negate.
Test already exists; this fixes the failure.
Fixes#15563.
Change-Id: I4b0b3ae8f2c9714bdcc405d4d0b1502ccfba2b40
Reviewed-on: https://go-review.googlesource.com/22830
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This test should now succeed after CL 22610 which fixes issue #7118
Change-Id: Ie785a84d77b27c832a1ddd81699bf25dab24b97d
Reviewed-on: https://go-review.googlesource.com/22640
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviving earlier work by @ality in https://golang.org/cl/57890043
to make the closing of extra file descriptors in syscall.StartProcess
less race-prone. Instead of making a list of open fds in the parent
before forking, the child can read through the list of open fds and
close the ones not explicitly requested. Also eliminate the
complication of keeping open any extra fds which were inherited by
the parent when it started.
This CL will be followed by one to eliminate the ForkLock in plan9,
which is now redundant.
Fixes#5605
Change-Id: I6b4b942001baa54248b656c52dced3b62021c486
Reviewed-on: https://go-review.googlesource.com/22610
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: David du Colombier <0intro@gmail.com>
Adds a small function signame that infers a signal name
from the signal table, otherwise will fallback to using
hex(sig) as previously. No signal table is present for
Windows hence it will always print the hex value.
Sample code and new result:
```go
package main
import (
"fmt"
"time"
)
func main() {
defer func() {
if err := recover(); err != nil {
fmt.Printf("err=%v\n", err)
}
}()
ticker := time.Tick(1e9)
for {
<-ticker
}
}
```
```shell
$ go run main.go &
$ kill -11 <pid>
fatal error: unexpected signal during runtime execution
[signal SIGSEGV: segmentation violation code=0x1 addr=0xb01dfacedebac1e
pc=0xc71db]
...
```
Fixes#13969
Change-Id: Ie6be312eb766661f1cea9afec352b73270f27f9d
Reviewed-on: https://go-review.googlesource.com/22753
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The following performance improvements have been made to the
low-level atomic functions for ppc64le & ppc64:
- For those cases containing a lwarx and stwcx (or other sizes):
sync, lwarx, maybe something, stwcx, loop to sync, sync, isync
The sync is moved before (outside) the lwarx/stwcx loop, and the
sync after is removed, so it becomes:
sync, lwarx, maybe something, stwcx, loop to lwarx, isync
- For the Or8 and And8, the shifting and manipulation of the
address to the word aligned version were removed and the
instructions were changed to use lbarx, stbcx instead of
register shifting, xor, then lwarx, stwcx.
- New instructions LWSYNC, LBAR, STBCC were tested and added.
runtime/atomic_ppc64x.s was changed to use the LWSYNC opcode
instead of the WORD encoding.
Fixes#15469
Ran some of the benchmarks in the runtime and sync directories.
Some results varied from run to run but the trend was improvement
based on best times for base and new:
runtime.test:
BenchmarkChanNonblocking-128 0.88 0.89 +1.14%
BenchmarkChanUncontended-128 569 511 -10.19%
BenchmarkChanContended-128 63110 53231 -15.65%
BenchmarkChanSync-128 691 598 -13.46%
BenchmarkChanSyncWork-128 11355 11649 +2.59%
BenchmarkChanProdCons0-128 2402 2090 -12.99%
BenchmarkChanProdCons10-128 1348 1363 +1.11%
BenchmarkChanProdCons100-128 1002 746 -25.55%
BenchmarkChanProdConsWork0-128 2554 2720 +6.50%
BenchmarkChanProdConsWork10-128 1909 1804 -5.50%
BenchmarkChanProdConsWork100-128 1624 1580 -2.71%
BenchmarkChanCreation-128 237 212 -10.55%
BenchmarkChanSem-128 705 667 -5.39%
BenchmarkChanPopular-128 5081190 4497566 -11.49%
BenchmarkCreateGoroutines-128 532 473 -11.09%
BenchmarkCreateGoroutinesParallel-128 35.0 34.7 -0.86%
BenchmarkCreateGoroutinesCapture-128 4923 4200 -14.69%
sync.test:
BenchmarkUncontendedSemaphore-128 112 94.2 -15.89%
BenchmarkContendedSemaphore-128 133 128 -3.76%
BenchmarkMutexUncontended-128 1.90 1.67 -12.11%
BenchmarkMutex-128 353 310 -12.18%
BenchmarkMutexSlack-128 304 283 -6.91%
BenchmarkMutexWork-128 554 541 -2.35%
BenchmarkMutexWorkSlack-128 567 556 -1.94%
BenchmarkMutexNoSpin-128 275 242 -12.00%
BenchmarkMutexSpin-128 1129 1030 -8.77%
BenchmarkOnce-128 1.08 0.96 -11.11%
BenchmarkPool-128 29.8 27.4 -8.05%
BenchmarkPoolOverflow-128 40564 36583 -9.81%
BenchmarkSemaUncontended-128 3.14 2.63 -16.24%
BenchmarkSemaSyntNonblock-128 1087 1069 -1.66%
BenchmarkSemaSyntBlock-128 897 893 -0.45%
BenchmarkSemaWorkNonblock-128 1034 1028 -0.58%
BenchmarkSemaWorkBlock-128 949 886 -6.64%
Change-Id: I4403fb29d3cd5254b7b1ce87a216bd11b391079e
Reviewed-on: https://go-review.googlesource.com/22549
Reviewed-by: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Minux Ma <minux@golang.org>
If b has exactly one predecessor, as happens
frequently with static calls, we can make
lookupVarOutgoing generate less garbage.
Instead of generating a value that is just
going to be an OpCopy and then get eliminated,
loop. This can lead to lots of looping.
However, this loop is way cheaper than generating
lots of ssa.Values and then eliminating them.
For a subset of the code in #15537:
Before:
28.31 real 36.17 user 1.68 sys
2282450944 maximum resident set size
After:
9.63 real 11.66 user 0.51 sys
638144512 maximum resident set size
Updates #15537.
Excitingly, it appears that this also helps
regular code:
name old time/op new time/op delta
Template 288ms ± 6% 276ms ± 7% -4.13% (p=0.000 n=21+24)
Unicode 143ms ± 8% 141ms ±10% ~ (p=0.287 n=24+25)
GoTypes 932ms ± 4% 874ms ± 4% -6.20% (p=0.000 n=23+22)
Compiler 4.89s ± 4% 4.58s ± 4% -6.46% (p=0.000 n=22+23)
MakeBash 40.2s ±13% 39.8s ± 9% ~ (p=0.648 n=23+23)
name old user-ns/op new user-ns/op delta
Template 388user-ms ±10% 373user-ms ± 5% -3.80% (p=0.000 n=24+25)
Unicode 203user-ms ± 6% 202user-ms ± 7% ~ (p=0.492 n=22+24)
GoTypes 1.29user-s ± 4% 1.17user-s ± 4% -9.67% (p=0.000 n=25+23)
Compiler 6.86user-s ± 5% 6.28user-s ± 4% -8.49% (p=0.000 n=25+25)
name old alloc/op new alloc/op delta
Template 51.5MB ± 0% 47.6MB ± 0% -7.47% (p=0.000 n=22+25)
Unicode 37.2MB ± 0% 37.1MB ± 0% -0.21% (p=0.000 n=25+25)
GoTypes 166MB ± 0% 138MB ± 0% -16.83% (p=0.000 n=25+25)
Compiler 756MB ± 0% 628MB ± 0% -16.96% (p=0.000 n=25+23)
name old allocs/op new allocs/op delta
Template 450k ± 0% 445k ± 0% -1.02% (p=0.000 n=25+25)
Unicode 356k ± 0% 356k ± 0% ~ (p=0.374 n=24+25)
GoTypes 1.31M ± 0% 1.25M ± 0% -4.18% (p=0.000 n=25+25)
Compiler 5.29M ± 0% 5.02M ± 0% -5.15% (p=0.000 n=25+23)
It also seems to help in other cases in which
phi insertion is a pain point (#14774, #14934).
Change-Id: Ibd05ed7b99d262117ece7bb250dfa8c3d1cc5dd2
Reviewed-on: https://go-review.googlesource.com/22790
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
The legacy mips64 backend doesn't handle large uint->float conversion
correctly. See #15552.
Change-Id: I84ceeaa95cc4e85f09cc46dfb30ab5d151f6b205
Reviewed-on: https://go-review.googlesource.com/22800
Reviewed-by: Minux Ma <minux@golang.org>
Builder is too slow. This test passed on builder machines but took
15+ min.
Change-Id: Ief9d67ea47671a57e954e402751043bc1ce09451
Reviewed-on: https://go-review.googlesource.com/22798
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I overlooked it when rebasing CL 19803.
Change-Id: Ife9d6bcc6a772715d137af903c64bafac0cdb216
Reviewed-on: https://go-review.googlesource.com/22797
Reviewed-by: Minux Ma <minux@golang.org>
Since tracebackctxt.go uses //export functions, the C functions can't be
externally visible in the C comment. The code was using attributes to
work around that, but that failed on Windows.
Change-Id: If4449fd8209a8998b4f6855ea89e5db1471b2981
Reviewed-on: https://go-review.googlesource.com/22786
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CLs 22181, 22332 and 22336 intorduced new functionality to be used
in cmd/link (see issue #15345 for details). But we didn't have chance
to use new functionality yet. Unexport newly introduced identifiers,
so we don't have to commit to the API until we actually tried it.
Rename File.COFFSymbols into File._COFFSymbols,
COFFSymbol.FullName into COFFSymbol._FullName,
Section.Relocs into Section._Relocs,
Reloc into _Relocs,
File.StringTable into File._StringTable and
StringTable into _StringTable.
Updates #15345
Change-Id: I770eeb61f855de85e0c175225d5d1c006869b9ec
Reviewed-on: https://go-review.googlesource.com/22720
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adds the FCFIDU instruction and uses it instead of the FCFID
instruction for unsigned integer to float casts. This change means
that unsigned integers do not have to be cast to signed integers
before being cast to a floating point value. Therefore it is no
longer necessary to insert instructions to detect and fix
values that overflow int64.
The previous code generating the uint64 to int64 cast handled
overflow by truncating the uint64 value. This truncation can
change the result of the rounding performed by the integer to
float cast.
The FCFIDU instruction was added in Power ISA 2.06B.
Fixes#15539.
Change-Id: Ia37a9631293eff91032d4cd9a9bec759d2142437
Reviewed-on: https://go-review.googlesource.com/22772
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
