Simple change to avoid calling the old typechecker in noder.Addr(). This
fixes cases where generic code calls a pointer method with a non-pointer
receiver.
Added test typeparam/lockable.go that now works with this change.
For lockable.go to work, also fix incorrect check to decide whether to
translate an OXDOT now or later. We should delay translating an OXDOT
until instantiation (because we don't know how embedding, etc. will
work) if the receiver has any typeparam, not just if the receiver type
is a simple typeparam. We also have to handle OXDOT for now in
IsAddressable(), until we can remove calls to the old typechecker in
(*irgen).funcBody().
Change-Id: I77ee5efcef9a8f6c7133564106a32437e36ba4bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/300990
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Change-Id: I25a6424bce9d372fa46e8bdd856095845d3397bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/300889
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Refer to ARM reference manual, like add(extended register) instructions,
the extension is encoded in the "option" field. If "Rd" or "Rn" is
RSP and "option" is "010" then LSL is preferred. Therefore, the instrution
"add Rm<<imm, RSP, RSP" or "add Rm<<imm RSP" is valid and can be encoded
as add(extended register) instruction.
But the current assembler can not handle like "op R1<<1, RSP, RSP"
instructions, this patch adds the support.
Because MVN(extended register) does not exist, remove it.
Add test cases.
Change-Id: I968749d75c6b93a4f297b39c73cc292e6b1035ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/284900
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Restore code to call types.CheckSize() in g.typ(). There are certain
cases (involving maps) where we need to do CheckSize here. In general,
the old typechecker calls CheckSize() a lot, and we want to eliminate
calling it eventually, so should get do types.CheckSize() when we create
a new concrete type.
However, the test typeparams/cons.go does not work with just calling
types.CheckSize() in g.typ() (which is why I disabled the calls
originally). The reason is that g.typ() is called recursively within
types.go, so it can be called on a partially-created recursive type,
which leads to an error in CheckSize(). So, we need to call CheckSize()
only on fully-created top-level types. So, I divided typ() into typ()
and typ1(), where typ() is now the external entry point, and typ1() is
called within types.go. Now, typ() can call CheckSize() safely.
I also added in an extra condition - we do not currently need to call
CheckSize() on non-fully-instantiated types, since they will not make it
to the backend. That could change a bit with dictionaries.
Fixes#44895
Change-Id: I783aa7d2999dd882ddbd99a7c19a6ff6ee420102
Reviewed-on: https://go-review.googlesource.com/c/go/+/300989
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This CL changes GOEXPERIMENT to act like other GO[CONFIG] environment
variables. Namely, that it can be set at make.bash time to provide a
default value used by the toolchain, but then can be manually set when
running either cmd/go or the individual tools (compiler, assembler,
linker).
For example, it's now possible to test rsc.io/tmp/fieldtrack by simply
running:
GOEXPERIMENT=fieldtrack go test -gcflags=-l rsc.io/tmp/fieldtrack \
-ldflags=-k=rsc.io/tmp/fieldtrack.tracked
without needing to re-run make.bash. (-gcflags=-l is needed because
the compiler's inlining abilities have improved, so calling a function
with a for loop is no longer sufficient to suppress inlining.)
Fixes#42681.
Change-Id: I2cf8995d5d0d05f6785a2ee1d3b54b2cfb3331ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/300991
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This file is generated, so the fix needs to happen upstream.
The file can then be regenerated using 'go generate net/http'.
Updates #44143
Change-Id: I13a1e7677470ba84a06976e5bbe24f4ce1e7cfb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/301069
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
cache.Trim, dowloadZip, rewriteVersionList, writeDiskCache all use
renameio.WriteFile to write their respective files to disk. For the
uses in cache.Trim and downloadZip, instead do of renameio.WriteFile,
do a truncate to the length of the file, then write the relevant bytes
so that a corrupt file (which would contain null bytes because of
the truncate) could be detected. For rewriteVersionList, use
lockedfile.Transform to do the write (which does a truncate as part of
the write too. writeDiskCache stays the same in this CL.
Also desete renameio methods that aren't used and remove the
renameio.WriteFile wrapper and just use renameio.WriteToFile which it
wraps.
There is a possibility of corrupt files in the cache (which was true
even before this CL) so later CLs will add facilities to clear corrupt
files in the cache.
Change-Id: I0d0bda40095e4cb898314315bf313e71650d8d25
Reviewed-on: https://go-review.googlesource.com/c/go/+/277412
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The existing code makes copies of every byte it hashes.
When passed a large chunk of memory, Write and WriteString
can skip the copying and initSeed for most of it.
To ensure that Write, WriteByte, and WriteString continue to
generate output that depends only on the sequence of bytes,
expand the grouping test to include WriteString and interleaved calls.
Also, make the test process a lot more data, to ensure that
Write* handled full buffers correctly.
name old time/op new time/op delta
Hash8Bytes-8 17.1ns ± 3% 16.5ns ± 2% -3.26% (p=0.000 n=29+27)
Hash320Bytes-8 74.9ns ± 2% 58.5ns ± 2% -21.86% (p=0.000 n=30+29)
Hash1K-8 246ns ± 3% 195ns ± 1% -20.82% (p=0.000 n=29+30)
Hash8K-8 1.87µs ± 2% 1.59µs ± 2% -15.04% (p=0.000 n=26+30)
name old speed new speed delta
Hash8Bytes-8 468MB/s ± 3% 484MB/s ± 2% +3.36% (p=0.000 n=29+27)
Hash320Bytes-8 4.28GB/s ± 2% 5.47GB/s ± 2% +27.97% (p=0.000 n=30+29)
Hash1K-8 4.17GB/s ± 3% 5.26GB/s ± 1% +26.28% (p=0.000 n=29+30)
Hash8K-8 4.38GB/s ± 2% 5.16GB/s ± 2% +17.70% (p=0.000 n=26+30)
Updates #42710
Change-Id: If3cdec1580ffb3e36fab9865e5a9d089c0a34bec
Reviewed-on: https://go-review.googlesource.com/c/go/+/278758
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The sentence starts "fsys must only contain",
which leads the reader to believe that fsys must not contain others.
The rapid reversal leads to confusion.
I had to read it several times to be sure I'd parsed it correctly.
Remove "only"; rely on the rest of the sentence to clarify.
Change-Id: I9fb7935aed4f9839344d3a00b761d20981fba864
Reviewed-on: https://go-review.googlesource.com/c/go/+/296529
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Emphasize ReadDirFile. It isn't really optional,
and all filesystems have at least one directory (".").
The remaining two additional interfaces are optimizations.
Call them that.
Fully qualify package package io identifiers.
Change-Id: Ibc425a5dfd27e08c2c10c353f780e4a6304cfd87
Reviewed-on: https://go-review.googlesource.com/c/go/+/296390
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
AddSymRef grows the section to fit the relocation. This was not
being accounted for. Instead, add a relocation and explicitly
populate it so we patch the desired instructions.
Change-Id: I583147e2545aea34c854f9d35ca920c57be60b90
Reviewed-on: https://go-review.googlesource.com/c/go/+/300949
Run-TryBot: Paul Murphy <murp@ibm.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
This change modifies runfinq to properly pass arguments to finalizers in
registers via reflectcall.
For #40724.
Change-Id: I414c0eff466ef315a0eb10507994e598dd29ccb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/300112
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For #44383
Change-Id: I3610105dad3574e210e226d3ba80a4ba5a7eeaa6
Reviewed-on: https://go-review.googlesource.com/c/go/+/300789
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The Go standard library retrofitted context support onto existing APIs
using context.Background and later offered variants that directly
supported user-defined context value specification. This commit makes
that behavior clear in documentation and suggests context-aware
alternatives if the user is looking for one.
An example motivation is supporting code for use in systems that expect
APIs to be cancelable for lifecycle correctness or load
shedding/management reasons, as alluded to in
https://blog.golang.org/context-and-structs.
Updates #44143
Change-Id: I2d7f954ddf9b48264d5ebc8d0007058ff9bddf14
Reviewed-on: https://go-review.googlesource.com/c/go/+/296152
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Jean de Klerk <deklerk@google.com>
Trust: Jean de Klerk <deklerk@google.com>
Run-TryBot: Jean de Klerk <deklerk@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
It turns out that if you write Go pointers to Go memory, the Go compiler
must be involved so that it generates various calls to the GC in the
process. Letting Windows write Go pointers to Go memory violated this.
So, we replace that with just a boring call to runtime.KeepAlive. That's
not a great API, but this is all internal code anyway. We fix it up
more elegantly for external consumption in x/sys/windows with CL 300369.
Fixes#44900.
Change-Id: Id6599a793af9c4815f6c9387b00796923f32cb97
Reviewed-on: https://go-review.googlesource.com/c/go/+/300349
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The implementation of GetRandom for Linux, FreeBSD and DragonflyBSD can
be shared.
Also remove GRND_INSECURE on DragonflyBSD as pointed out by Ian in the
review of CL 269999.
Change-Id: I5bf4c1bd51ddb2ad600652a57e0bc1bafa1cf40d
Reviewed-on: https://go-review.googlesource.com/c/go/+/299133
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, the cmd/dist runs test cases in misc/cgo/testsantizers only
when memeory sanitizer is supported, but the tsan tests in
misc/cgo/testsanitizers do not require support for -msan option, which
makes tsan tests can not be run on some unsupported -msan option platforms.
Therefore, this patch moves the test constraints from cmd/dist to
msan_test.go, so that the tsan tests in misc/cgo/testsanitizers
can be run on any system where the C compiler supports -fsanitize=thread
option.
Change-Id: I779c92eedd0270050f1a0b1a69ecce50c3712bc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/297774
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the case of partially inferred type arguments, we need to use the
IndexExpr as the key in g.info.Inferred[] rather than the CallExpr.
Added an extra fromStrings1 call in the settable.go test that tests
partially inferred type arguments. This new call uses a new concrete
type SettableString as well.
I also added another implementation fromStrings3 (derived from a go2go
tests) that typechecks but intentionally causes a panic.
Change-Id: I74d35c5a741f72f37160a96fbec939451157f392
Reviewed-on: https://go-review.googlesource.com/c/go/+/300309
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This is rarely used, and is implied based on the
memory type of the operand. This is a step towards
simplifying the MOV* pseudo opcodes on ppc64.
Similarly, remove the bogus param value from AVMULESB.
Change-Id: Ibad4d045ec6d8c5163a468b2db1dfb762ef674ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/300177
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Trust: Ian Lance Taylor <iant@golang.org>
The timerpMask optimization updates a mask of Ps (potentially)
containing timers in pidleget / pidleput. For correctness, it depends on
the assumption that new timers can only be added to a P's own heap.
addtimer violates this assumption if it is preempted after computing pp.
That G may then run on a different P, but adding a timer to the original
P's heap.
Avoid this by disabling preemption while pp is in use.
Other uses of doaddtimer should be OK:
* moveTimers: always moves to the current P's heap
* modtimer, cleantimers, addAdjustedTimers, runtimer: does not add net
new timers to the heap while locked
Fixes#44868
Change-Id: I4a5d080865e854931d0a3a09a51ca36879101d72
Reviewed-on: https://go-review.googlesource.com/c/go/+/300610
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
The new Graph type implements an incremental version of the MVS
algorithm, with requirements pushed in by the caller instead of pulled
by an internal MVS traversal.
To avoid redundancy going forward (and to ensure adequate test
coverage of the incremental implementation), the existing buildList
function is reimplemented in terms of Graph.
For #36460
Change-Id: Idd0b6ab8f17cc41d83a2a4c25a95f82e9ce1eab0
Reviewed-on: https://go-review.googlesource.com/c/go/+/244760
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
For #36460
Change-Id: I8dd6e6f998a217a4287212815ce61209df6f007f
Reviewed-on: https://go-review.googlesource.com/c/go/+/296609
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Previosly, EditBuildList performed an mvs.Upgrade followed by an
mvs.Downgrade, with the Downgrade building on the result of the
Upgrade. Unfortunately, that approach potentially folds in irrelevant
dependencies from the first Upgrade, which are then preserved
unnecessarily by the Downgrade (see mod_get_downup_artifact.txt).
Now, we use the initial Upgrade only to compute the maximum allowed
versions of transitive dependencies, and apply the module upgrades and
downgrades together in a single operation.
For #36460
Change-Id: I7590c137111fed4a3b06531c88d90efd49e6943a
Reviewed-on: https://go-review.googlesource.com/c/go/+/290770
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Follow-up to CL 297530.
For #43985
For #34992
Change-Id: I2cfa6c41c013e627c3464c383ca42f5c9ebe521a
Reviewed-on: https://go-review.googlesource.com/c/go/+/297634
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
In the ppc64 ISA DS form loads and stores are restricted to offset
fields that are a multiple of 4. This is currently handled with checks
in the rules that generate MOVDload, MOVWload, MOVDstore and
MOVDstorezero to prevent invalid instructions from getting to the
assembler.
An unhandled case was discovered which led to the search for a better
solution to this problem. Now, instead of checking the offset in the
rules, this will be detected when processing these Ops in
ssaGenValues in ppc64/ssa.go. If the offset is not valid, the address
of the symbol to be loaded or stored will be computed using the base
register + offset, and that value used in the new base register.
With the full address in the base register, the offset field can be
zero in the instruction.
Updates #44739
Change-Id: I4f3c0c469ae70a63e3add295c9b55ea0e30ef9b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/299789
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
To ease readability we typically keep the partial order lists sorted by
rank. This isn't required for correctness, it just makes it (slightly)
easier to read the lists.
Currently we must notice out-of-order entries during code review, which
is an error-prone process.
Add a test to enforce ordering, and fix the errors that have crept in.
Most of the existing errors were misordered lockRankHchan or
lockRankPollDesc.
While we're here, I've moved the correctness check that the partial
ordering satisfies the total ordering from init to a test case. This
will allow us to catch these errors without even running
staticlockranking.
Change-Id: I9c11abe49ea26c556439822bb6a3183129600c3b
Reviewed-on: https://go-review.googlesource.com/c/go/+/300171
Trust: Michael Pratt <mpratt@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This change properly handles a TokenReader which
returns an EOF in the middle of an open XML
element.
Thanks to Sam Whited for reporting this.
Fixes CVE-2021-27918
Fixes#44913
Change-Id: Id02a3f3def4a1b415fa2d9a8e3b373eb6cb0f433
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/1004594
Reviewed-by: Russ Cox <rsc@google.com>
Reviewed-by: Roland Shoemaker <bracewell@google.com>
Reviewed-by: Filippo Valsorda <valsorda@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/300391
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
When operating on a Zip file that contains a file prefixed with "../",
Open(...) would cause a panic in toValidName when attempting to strip
the prefixed path components.
Fixes CVE-2021-27919
Fixes#44916
Change-Id: Ic755d8126cb0897e2cbbdacf572439c38dde7b35
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/1004761
Reviewed-by: Filippo Valsorda <valsorda@google.com>
Reviewed-by: Russ Cox <rsc@google.com>
Reviewed-by: Katie Hockman <katiehockman@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/300489
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Deal with cases like: 'type P[T any] T' (used to add methods to an
arbitrary type T), In this case, P[T] has kind types.TTYPEPARAM (as does
T itself), but requires more code to substitute than a simple TTYPEPARAM
T. See the comment near the beginning of subster.typ() in stencil.go.
Add new test absdiff.go. This test has a case for complex types (which
I've commented out) that will only work when we deal better with Go
builtins in generic functions (like real and imag).
Remove change in fmt.go for TTYPEPARAMS that is no longer needed (since
all TTYPEPARAMS have a sym) and was sometimes causing an extra prefix
when formatting method names.
Separate out the setting of a TTYPEPARAM bound, since it can reference
the TTYPEPARAM being defined, so must be done separately. Also, we don't
currently (and may not ever) need bounds after types2 typechecking.
Change-Id: Id173057e0c4563b309b95e665e9c1151ead4ba77
Reviewed-on: https://go-review.googlesource.com/c/go/+/300049
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The const parseTypeParams was grouped with printer-related consts in
gofmt.go, implicitly suggesting that it must be kept in sync with
go/format/format.go.
Change-Id: Ia65dc15c27fef2c389f963071252adee32ec6bd6
Reviewed-on: https://go-review.googlesource.com/c/go/+/300451
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This file has a go:build comment without a corresponding +build comment.
Change-Id: Id01604242a14d8ead16ffb9aa1b45eef7706956a
Reviewed-on: https://go-review.googlesource.com/c/go/+/300450
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
LLVM changed their main branch name, so this link didn't work anymore.
Change-Id: I4c3a67b26e2bda012071281e29ea3c932c185130
Reviewed-on: https://go-review.googlesource.com/c/go/+/300469
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
reflectcall tail calls runtime.call{16,32,...} functions, so they
have the same signature as reflectcall. It is important for them
to have the correct arg map, because those functions, as well as
the function being reflectcall'd, could move the stack. When that
happens, its pointer arguments, in particular regArgs, need to be
adjusted. Otherwise it will still point to the old stack, causing
memory corruption.
This only caused failures on the regabi builder because it is the
only place where internal/abi.RegArgs is not a zero-sized type.
May fix#44821.
Change-Id: Iab400ea6b60c52360d0b43a793f6bfe50ca9989b
Reviewed-on: https://go-review.googlesource.com/c/go/+/300154
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
In some cases, this test would prompt for interactive SSH passwords in
order to authenticate to github.com over SSH. Setting GIT_SSH_COMMAND
to /bin/false prevents that, while still provoking the desired Git
failure mode.
Updates #44904.
Change-Id: Idc9fe9f47d2ccb6c8a4ea988b73d9c8c774e4079
Reviewed-on: https://go-review.googlesource.com/c/go/+/300156
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Kevin Burke <kev@inburke.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Kevin Burke <kev@inburke.com>
Since the 5.7 release, DragonFlyBSD supports as well
the getrandom function, the actual stable is 5.8.
Change-Id: I2b8fc468771b10ac12b38ea7e8e5314342de6375
GitHub-Last-Rev: c5c496f418
GitHub-Pull-Request: golang/go#42617
Reviewed-on: https://go-review.googlesource.com/c/go/+/269999
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
In scenarios where splice() is called, splice() is usually called not just once, but many times,
which means that a lot of pipes will be created and destroyed frequently, costing an amount of system resources
and slowing down performance, thus I suggest that we add a pipe pool for reusing pipes.
Benchmark tests:
goos: linux
goarch: amd64
pkg: internal/poll
cpu: AMD EPYC 7K62 48-Core Processor
name old time/op new time/op delta
SplicePipe-8 1.36µs ± 1% 0.02µs ± 0% -98.57% (p=0.001 n=7+7)
SplicePipeParallel-8 747ns ± 4% 4ns ± 0% -99.41% (p=0.001 n=7+7)
name old alloc/op new alloc/op delta
SplicePipe-8 24.0B ± 0% 0.0B -100.00% (p=0.001 n=7+7)
SplicePipeParallel-8 24.0B ± 0% 0.0B -100.00% (p=0.001 n=7+7)
name old allocs/op new allocs/op delta
SplicePipe-8 1.00 ± 0% 0.00 -100.00% (p=0.001 n=7+7)
SplicePipeParallel-8 1.00 ± 0% 0.00 -100.00% (p=0.001 n=7+7)
Fixes#42740
Change-Id: Idff654b7264342084e089b5ba796c87c380c471b
Reviewed-on: https://go-review.googlesource.com/c/go/+/271537
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Brad Fitzpatrick <bradfitz@golang.org>
This change upgrades x/mod to pull in the fix from CL 300149.
Fixes#44776.
Change-Id: I273f41df2abfff76d91315b7f19fce851c8770d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/300176
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This is a 1:1 port of the respective change in go/types
in https://golang.org/cl/299590.
Change-Id: I65ad723f2e21e3d95fc0b94665e0121e31871a48
Reviewed-on: https://go-review.googlesource.com/c/go/+/300250
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Until now, errors which came with additional details (e.g., a declaration
cycle error followed by the list of objects involved in the cycle, one per
line) were reported as an ordinary error followed by "secondary" errors,
with the secondary errors marked as such by having a tab-indented error
message.
This approach often required clients to filter these secondary errors
(as they are not new errors, they are just clarifying a previously
reported error).
This CL introduces a new internal error_ type which permits accumulating
various error information that may then be reported as a single error.
Change-Id: I25b2f094facd37e12737e517f7ef8853d465ff77
Reviewed-on: https://go-review.googlesource.com/c/go/+/296689
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
