There is a hierarchy of location defined by loop depth:
-1 = the heap
0 = function results
1 = local variables (and parameters)
2 = local variable declared inside a loop
3 = local variable declared inside a loop inside a loop
etc
In general if an address from loopdepth n is assigned to
something in loop depth m < n, that indicates an extended
lifetime of some form that requires a heap allocation.
Function results can be local variables too, though, and so
they don't actually fit into the hierarchy very well.
Treat the address of a function result as level 1 so that
if it is written back into a result, the address is treated
as escaping.
Fixes#8185.
LGTM=iant
R=iant
CC=golang-codereviews
https://golang.org/cl/108870044
Provide Nextafter64 as alias to Nextafter.
For submission after the 1.3 release.
Fixes#8117.
LGTM=adonovan
R=adonovan
CC=golang-codereviews
https://golang.org/cl/101750048
The analysis for &x was using the loop depth on x set
during x's declaration. A type switch creates a list of
implicit declarations that were not getting initialized
with loop depths.
Fixes#8176.
LGTM=iant
R=iant
CC=golang-codereviews
https://golang.org/cl/108860043
The putpclcdelta function set the DWARF line number PC to
s->value + pcline->pc, which is correct, but the code then set
the local variable pc to epc, which can be a different value.
This caused the next delta in the DWARF table to be wrong.
Fixes#8098.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/104950045
A runtime.Goexit during a panic-invoked deferred call
left the panic stack intact even though all the stack frames
are gone when the goroutine is torn down.
The next goroutine to reuse that struct will have a
bogus panic stack and can cause the traceback routines
to walk into garbage.
Most likely to happen during tests, because t.Fatal might
be called during a deferred func and uses runtime.Goexit.
This "not enough cleared in Goexit" failure mode has
happened to us multiple times now. Clear all the pointers
that don't make sense to keep, not just gp->panic.
Fixes#8158.
LGTM=iant, dvyukov
R=iant, dvyukov
CC=golang-codereviews
https://golang.org/cl/102220043
I am not sure what the rounding here was
trying to do, but it was skipping the first
pointer on native client.
The code above the rounding already checks
that xoffset is widthptr-aligned, so the rnd
was a no-op everywhere but on Native Client.
And on Native Client it was wrong.
Perhaps it was supposed to be rounding down,
not up, but zerorange handles the extra 32 bits
correctly, so the rnd does not seem to be necessary
at all.
This wouldn't be worth doing for Go 1.3 except
that it can affect code on the playground.
Fixes#8155.
LGTM=r, iant
R=golang-codereviews, r, iant
CC=dvyukov, golang-codereviews, khr
https://golang.org/cl/108740047
The current wording is reversed in 2 places.
Not sure how it got 4 LGTMs (mine was there as well).
Update #6242.
LGTM=dan.kortschak, r, rsc
R=golang-codereviews, 0xjnml, dan.kortschak, r, rsc
CC=golang-codereviews
https://golang.org/cl/101980047
It's not clear how widespread this issue is, but we do have a
test case generated by a development version of clang.
I don't know whether this should go into 1.3 or not; happy to
hear arguments either way.
LGTM=rsc
R=golang-codereviews, bradfitz, rsc
CC=golang-codereviews
https://golang.org/cl/96680045
I introduced this bug when I changed the escape
analysis to run in phases based on call graph
dependency order, in order to be more precise about
inputs escaping back to outputs (functions returning
their arguments).
Given
func f(z **int) *int { return *z }
we were tagging the function as 'z does not escape
and is not returned', which is all true, but not
enough information.
If used as:
var x int
p := &x
q := &p
leak(f(q))
then the compiler might try to keep x, p, and q all
on the stack, since (according to the recorded
information) nothing interesting ends up being
passed to leak.
In fact since f returns *q = p, &x is passed to leak
and x needs to be heap allocated.
To trigger the bug, you need a chain that the
compiler wants to keep on the stack (like x, p, q
above), and you need a function that returns an
indirect of its argument, and you need to pass the
head of the chain to that function. This doesn't
come up very often: this bug has been present since
June 2012 (between Go 1 and Go 1.1) and we haven't
seen it until now. It helps that most functions that
return indirects are getters that are simple enough
to be inlined, avoiding the bug.
Earlier versions of Go also had the benefit that if
&x really wasn't used beyond x's lifetime, nothing
broke if you put &x in a heap-allocated structure
accidentally. With the new stack copying, though,
heap-allocated structures containing &x are not
updated when the stack is copied and x moves,
leading to crashes in Go 1.3 that were not crashes
in Go 1.2 or Go 1.1.
The fix is in two parts.
First, in the analysis of a function, recognize when
a value obtained via indirect of a parameter ends up
being returned. Mark those parameters as having
content escape back to the return results (but we
don't bother to write down which result).
Second, when using the analysis to analyze, say,
f(q), mark parameters with content escaping as
having any indirections escape to the heap. (We
don't bother trying to match the content to the
return value.)
The fix could be less precise (simpler).
In the first part we might mark all content-escaping
parameters as plain escaping, and then the second
part could be dropped. Or we might assume that when
calling f(q) all the things pointed at by q escape
always (for any f and q).
The fix could also be more precise (more complex).
We might record the specific mapping from parameter
to result along with the number of indirects from the
parameter to the thing being returned as the result,
and then at the call sites we could set up exactly the
right graph for the called function. That would make
notleaks(f(q)) be able to keep x on the stack, because
the reuslt of f(q) isn't passed to anything that leaks it.
The less precise the fix, the more stack allocations
become heap allocations.
This fix is exactly as precise as it needs to be so that
none of the current stack allocations in the standard
library turn into heap allocations.
Fixes#8120.
LGTM=iant
R=golang-codereviews, iant
CC=golang-codereviews, khr, r
https://golang.org/cl/102040046
The 'address taken' bit in a function variable was not
propagating into the inlined copies, causing incorrect
liveness information.
LGTM=dsymonds, bradfitz
R=golang-codereviews, bradfitz
CC=dsymonds, golang-codereviews, iant, khr, r
https://golang.org/cl/96670046
The 1-byte write was silently clearing a byte on the stack.
If there was another function call with more arguments
in the same stack frame, no harm done.
Otherwise, if the variable at that location was already zero,
no harm done.
Otherwise, problems.
Fixes#8139.
LGTM=dsymonds
R=golang-codereviews, dsymonds
CC=golang-codereviews, iant, r
https://golang.org/cl/100940043
This is a workaround - the code should be better than this - but the
fix avoids generating large numbers of linehist entries for the wrapper
functions that enable interface conversions. There can be many of
them, they all happen at the end of compilation, and they can all
share a linehist entry.
Avoids bad n^2 behavior in liblink.
Test case in issue 8135 goes from 64 seconds to 2.5 seconds (still bad
but not intolerable).
Fixes#8135.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/104840043
If we see a typedef to an anonymous struct more than once,
presumably in two different Go files that import "C", use the
same Go type name.
Fixes#8133.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/102080043
Right now, any revision on the default branch after go1.3beta2 is
described by "go verson" as go1.3beta2 plus some revision.
That's OK for now, but once go1.3 is released, that will seem wrong.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/98650046
This program has barely been touched since it was first committed,
and in its current state it opens a code execution vector similar
to the one that was recently fixed in go.tools/playground/socket.
Rather than try to make it secure, remove it.
LGTM=minux, rsc
R=rsc, minux
CC=golang-codereviews
https://golang.org/cl/102030047
We were requiring that the defer stack and the panic stack
be completely processed, thinking that if any were left over
the stack scan and the defer stack/panic stack must be out
of sync. It turns out that the panic stack may well have
leftover entries in some situations, and that's okay.
Fixes#8132.
LGTM=minux, r
R=golang-codereviews, minux, r
CC=golang-codereviews, iant, khr
https://golang.org/cl/100900044
C globals are conservatively scanned. This helps
avoid false retention, especially for 32 bit.
LGTM=rsc
R=golang-codereviews, khr, rsc
CC=golang-codereviews
https://golang.org/cl/102040043
The 'continuation pc' is where the frame will continue
execution, if anywhere. For a frame that stopped execution
due to a CALL instruction, the continuation pc is immediately
after the CALL. But for a frame that stopped execution due to
a fault, the continuation pc is the pc after the most recent CALL
to deferproc in that frame, or else 0. That is where execution
will continue, if anywhere.
The liveness information is only recorded for CALL instructions.
This change makes sure that we never look for liveness information
except for CALL instructions.
Using a valid PC fixes crashes when a garbage collection or
stack copying tries to process a stack frame that has faulted.
Record continuation pc in heapdump (format change).
Fixes#8048.
LGTM=iant, khr
R=khr, iant, dvyukov
CC=golang-codereviews, r
https://golang.org/cl/100870044
Update #2675
The code here was using the error check for Linux/386,
not the one for FreeBSD/386. Most of the time it worked.
Thanks to Neel Natu (FreeBSD developer) for finding this.
The s/JCC/JAE/ a few lines later is a no-op but makes the
test match the rest of the file. Why we write JAE instead of JCC
I don't know, but the two are equivalent and the file might
as well be consistent.
LGTM=bradfitz, minux
R=golang-codereviews, bradfitz, minux
CC=golang-codereviews
https://golang.org/cl/99680044
This CL forces the optimizer to preserve some memory stores
that would be redundant except that a stack scan due to garbage
collection or stack copying might look at them during a function call.
As such, it forces additional memory writes and therefore slows
down the execution of some programs, especially garbage-heavy
programs that are already limited by memory bandwidth.
The slowdown can be as much as 7% for end-to-end benchmarks.
These numbers are from running go1.test -test.benchtime=5s three times,
taking the best (lowest) ns/op for each benchmark. I am excluding
benchmarks with time/op < 10us to focus on macro effects.
All benchmarks are on amd64.
Comparing tip (a27f34c771cb) against this CL on an Intel Core i5 MacBook Pro:
benchmark old ns/op new ns/op delta
BenchmarkBinaryTree17 3876500413 3856337341 -0.52%
BenchmarkFannkuch11 2965104777 2991182127 +0.88%
BenchmarkGobDecode 8563026 8788340 +2.63%
BenchmarkGobEncode 5050608 5267394 +4.29%
BenchmarkGzip 431191816 434168065 +0.69%
BenchmarkGunzip 107873523 110563792 +2.49%
BenchmarkHTTPClientServer 85036 86131 +1.29%
BenchmarkJSONEncode 22143764 22501647 +1.62%
BenchmarkJSONDecode 79646916 85658808 +7.55%
BenchmarkMandelbrot200 4720421 4700108 -0.43%
BenchmarkGoParse 4651575 4712247 +1.30%
BenchmarkRegexpMatchMedium_1K 71986 73490 +2.09%
BenchmarkRegexpMatchHard_1K 111018 117495 +5.83%
BenchmarkRevcomp 648798723 659352759 +1.63%
BenchmarkTemplate 112673009 112819078 +0.13%
Comparing tip (a27f34c771cb) against this CL on an Intel Xeon E5520:
BenchmarkBinaryTree17 5461110720 5393104469 -1.25%
BenchmarkFannkuch11 4314677151 4327177615 +0.29%
BenchmarkGobDecode 11065853 11235272 +1.53%
BenchmarkGobEncode 6500065 6959837 +7.07%
BenchmarkGzip 647478596 671769097 +3.75%
BenchmarkGunzip 139348579 141096376 +1.25%
BenchmarkHTTPClientServer 69376 73610 +6.10%
BenchmarkJSONEncode 30172320 31796106 +5.38%
BenchmarkJSONDecode 113704905 114239137 +0.47%
BenchmarkMandelbrot200 6032730 6003077 -0.49%
BenchmarkGoParse 6775251 6405995 -5.45%
BenchmarkRegexpMatchMedium_1K 111832 113895 +1.84%
BenchmarkRegexpMatchHard_1K 161112 168420 +4.54%
BenchmarkRevcomp 876363406 892319935 +1.82%
BenchmarkTemplate 146273096 148998339 +1.86%
Just to get a sense of where we are compared to the previous release,
here are the same benchmarks comparing Go 1.2 to this CL.
Comparing Go 1.2 against this CL on an Intel Core i5 MacBook Pro:
BenchmarkBinaryTree17 4370077662 3856337341 -11.76%
BenchmarkFannkuch11 3347052657 2991182127 -10.63%
BenchmarkGobDecode 8791384 8788340 -0.03%
BenchmarkGobEncode 4968759 5267394 +6.01%
BenchmarkGzip 437815669 434168065 -0.83%
BenchmarkGunzip 94604099 110563792 +16.87%
BenchmarkHTTPClientServer 87798 86131 -1.90%
BenchmarkJSONEncode 22818243 22501647 -1.39%
BenchmarkJSONDecode 97182444 85658808 -11.86%
BenchmarkMandelbrot200 4733516 4700108 -0.71%
BenchmarkGoParse 5054384 4712247 -6.77%
BenchmarkRegexpMatchMedium_1K 67612 73490 +8.69%
BenchmarkRegexpMatchHard_1K 107321 117495 +9.48%
BenchmarkRevcomp 733270055 659352759 -10.08%
BenchmarkTemplate 109304977 112819078 +3.21%
Comparing Go 1.2 against this CL on an Intel Xeon E5520:
BenchmarkBinaryTree17 5986953594 5393104469 -9.92%
BenchmarkFannkuch11 4861139174 4327177615 -10.98%
BenchmarkGobDecode 11830997 11235272 -5.04%
BenchmarkGobEncode 6608722 6959837 +5.31%
BenchmarkGzip 661875826 671769097 +1.49%
BenchmarkGunzip 138630019 141096376 +1.78%
BenchmarkHTTPClientServer 71534 73610 +2.90%
BenchmarkJSONEncode 30393609 31796106 +4.61%
BenchmarkJSONDecode 139645860 114239137 -18.19%
BenchmarkMandelbrot200 5988660 6003077 +0.24%
BenchmarkGoParse 6974092 6405995 -8.15%
BenchmarkRegexpMatchMedium_1K 111331 113895 +2.30%
BenchmarkRegexpMatchHard_1K 165961 168420 +1.48%
BenchmarkRevcomp 995049292 892319935 -10.32%
BenchmarkTemplate 145623363 148998339 +2.32%
Fixes#8036.
LGTM=khr
R=golang-codereviews, josharian, khr
CC=golang-codereviews, iant, r
https://golang.org/cl/99660044
The rtype struct is meant to be a copy of reflect.rtype. The
zero field was added to reflect.rtype in 18495:6e50725ac753.
LGTM=rsc
R=khr, rsc
CC=golang-codereviews
https://golang.org/cl/93660045
[Same as CL 102820043 except applied changes to 6g/gsubr.c
also to 5g/gsubr.c and 8g/gsubr.c. The problem I had last night
trying to do that was that 8g's copy of nodarg has different
(but equivalent) control flow and I was pasting the new code
into the wrong place.]
Description from CL 102820043:
The 'nodarg' function is used to obtain a Node*
representing a function argument or result.
It returned a brand new Node*, but that violates
the guarantee in most places in the compiler that
two Node*s refer to the same variable if and only if
they are the same Node* pointer. Reestablish that
invariant by making nodarg return a preexisting
named variable if present.
Having fixed that, avoid any copy during x=x in
componentgen, because the VARDEF we emit
before the copy marks the lhs x as dead incorrectly.
The change in walk.c avoids modifying the result
of nodarg. This was the only place in the compiler
that did so.
Fixes#8097.
LGTM=khr
R=golang-codereviews, khr
CC=golang-codereviews, iant, khr, r
https://golang.org/cl/103750043
Breaks 386 and arm builds.
The obvious reason is that this CL only edited 6g/gsubr.c
and failed to edit 5g/gsubr.c and 8g/gsubr.c.
However, the obvious CL applying the same edit to those
files (CL 101900043) causes mysterious build failures
in various of the standard package tests, usually involving
reflect. Something deep and subtle is broken but only on
the 32-bit systems.
Undo this CL for now.
««« original CL description
cmd/gc: fix x=x crash
The 'nodarg' function is used to obtain a Node*
representing a function argument or result.
It returned a brand new Node*, but that violates
the guarantee in most places in the compiler that
two Node*s refer to the same variable if and only if
they are the same Node* pointer. Reestablish that
invariant by making nodarg return a preexisting
named variable if present.
Having fixed that, avoid any copy during x=x in
componentgen, because the VARDEF we emit
before the copy marks the lhs x as dead incorrectly.
The change in walk.c avoids modifying the result
of nodarg. This was the only place in the compiler
that did so.
Fixes#8097.
LGTM=r, khr
R=golang-codereviews, r, khr
CC=golang-codereviews, iant
https://golang.org/cl/102820043
»»»
TBR=r
CC=golang-codereviews, khr
https://golang.org/cl/95660043
The 'nodarg' function is used to obtain a Node*
representing a function argument or result.
It returned a brand new Node*, but that violates
the guarantee in most places in the compiler that
two Node*s refer to the same variable if and only if
they are the same Node* pointer. Reestablish that
invariant by making nodarg return a preexisting
named variable if present.
Having fixed that, avoid any copy during x=x in
componentgen, because the VARDEF we emit
before the copy marks the lhs x as dead incorrectly.
The change in walk.c avoids modifying the result
of nodarg. This was the only place in the compiler
that did so.
Fixes#8097.
LGTM=r, khr
R=golang-codereviews, r, khr
CC=golang-codereviews, iant
https://golang.org/cl/102820043
