Features:
More robust: silently ignore type errors in modes that don't need
SSA form: describe, referrers, implements, freevars, description.
This makes the tool much more robust for everyday queries.
Less configuration: don't require a scope argument for all queries.
Only queries that do pointer analysis need it.
For the rest, the initial position is enough for
importQueryPackage to deduce the scope.
It now works for queries in GoFiles, TestGoFiles, or XTestGoFiles.
(It no longer works for ad-hoc main packages like
$GOROOT/src/net/http/triv.go)
More complete: "referrers" computes the scope automatically by
scanning the import graph of the entire workspace, using gorename's
refactor/importgraph package. This requires two passes at loading.
Faster: simplified start-up logic avoids unnecessary package loading
and SSA construction (a consequence of bad abstraction) in many
cases.
"callgraph": remove it. Unlike all the other commands it isn't
related to the current selection, and we have
golang.org/x/tools/cmdcallgraph now.
Internals:
Drop support for long-running clients (i.e., Pythia), since
godoc -analysis supports all the same features except "pointsto",
and precomputes all the results so latency is much lower.
Get rid of various unhelpful abstractions introduced to support
long-running clients. Expand out the set-up logic for each
subcommand. This is simpler, easier to read, and gives us more
control, at a small cost in duplication---the familiar story of
abstractions.
Discard PTA warnings. We weren't showing them (nor should we).
Split tests into separate directories (so that importgraph works).
Change-Id: I55d46b3ab33cdf7ac22436fcc2148fe04c901237
Reviewed-on: https://go-review.googlesource.com/8243
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Emacs integration:
- eliminate oracle minor mode
- in go-mode, bind F5, F6 to "describe", "referrers".
This reverts a previous policy decision but convenience matters too.
- don't insist on an analysis scope for modes that don't do PTA.
- don't hide the filename as "▶"; show the last 20 chars.
(Especially useful for "referrers" mode.)
- output postprocessing: don't get stuck in a loop if the output
is not as expected (e.g. when it includes a panic log).
referrers:
- show the matching lines (like grep does).
We do the I/O in parallel.
Change-Id: I86b18c1d3a4d9fa4242984cba62b314796669d8e
Reviewed-on: https://go-review.googlesource.com/8120
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Cover deleted all comments because they can break the simple way that
counters are injected into the rewritten source. But //go: comments have
semantic value, and for instance go test -cover runtime fails during
compilation because of their absence from the annotated source.
We can keep the //go: comments because they are at the beginning of
the line and are not affected by our counter injection.
Fixes#10270.
After this CL, go test -cover runtime works.
A testing strategy that does not involve a golden file would be welcome
but I can't think of one.
Change-Id: I73f7b7a36383a8efed8e33fa2414cd0eac7d015a
Reviewed-on: https://go-review.googlesource.com/8173
Reviewed-by: Robert Griesemer <gri@golang.org>
Given
x()
panic(1)
y()
the y should not show as covered.
Fixes#10185
Change-Id: Iec61f1b096a888e6727be5f4526508654f5d3c91
Reviewed-on: https://go-review.googlesource.com/8140
Reviewed-by: Robert Griesemer <gri@golang.org>
Silly test added yesterday requires that some code in a goroutine executes.
Make sure it does.
Change-Id: I7e852454736e300151473986cc437a70b41dc9b7
Reviewed-on: https://go-review.googlesource.com/7691
Reviewed-by: Russ Cox <rsc@golang.org>
eg with no arguments prints its usage, including a hand-written flag summary.
eg -help shows the detailed help message.
Change-Id: I615d8de3985ced1e86e9d7cafa9ef679079b249c
Reviewed-on: https://go-review.googlesource.com/6951
Reviewed-by: Robert Griesemer <gri@golang.org>
It used to do packages only when run by the go tool, but it was
fixed a while back to handle packages properly when doing a
directory walk. Remove the incorrect information from the
documentation.
Change-Id: I961340bb84e48474c94ee03bf88f9136492c0226
Reviewed-on: https://go-review.googlesource.com/7642
Reviewed-by: Andrew Gerrand <adg@golang.org>
Just missed a case (ha!) in the tree walk. Dup the code for an empty switch, add test.
Fixes#10163.
Change-Id: I3d50ab6cb450ca21e87213291eaab8cbe924fac5
Reviewed-on: https://go-review.googlesource.com/7641
Reviewed-by: Andrew Gerrand <adg@golang.org>
Skip tests on arm platforms.
The godoc tests require large amounts of memory, in excess of 700mb in -index mode which none of the arm builders have spare.
Because of their requirements the tests can be killed by the test runner leaving stray godoc processes spinning in swap trying to -index.
Change-Id: I1544d56e9d9aabbbaac21adeebfb9e2690bd2da5
Reviewed-on: https://go-review.googlesource.com/7540
Reviewed-by: Andrew Gerrand <adg@golang.org>
On tip, search included redundant source results from /pkg/bootstrap
(with broken links as godoc doesn't support source files under /pkg).
This change excludes all directories under /pkg from indexing.
Fixesgolang/go#10024.
Change-Id: I0c69d22ff08d131f9c37c91a7711db6a4ec53fd4
Reviewed-on: https://go-review.googlesource.com/7267
Reviewed-by: Andrew Gerrand <adg@golang.org>
Also use a more reliable implementation.
Change-Id: I9e6858c7e9bdb60f1fb4e060e6d4d1b3762b83bc
Reviewed-on: https://go-review.googlesource.com/7260
Reviewed-by: Minux Ma <minux@golang.org>
Run godoc indexing just once on startup. Wait for indexing to complete
before switching to new side. Increase startup timeout to accommodate for
indexing.
Updates golang/go#9996.
Change-Id: I1e746a68b7d787e6d7f180c2617ea75f0d3291f8
Reviewed-on: https://go-review.googlesource.com/7120
Reviewed-by: Andrew Gerrand <adg@golang.org>
The caller of Usage should call os.Exit -- Usage shouldn't call it.
Change-Id: I3decf662883fb2a6b19b7035138ee8a06a02de08
Reviewed-on: https://go-review.googlesource.com/7110
Reviewed-by: Andrew Gerrand <adg@golang.org>
...since the zero value is more useful by far.
This is a breaking API change, obviously. (One or two tests in this
CL have intentional been left using the zero value, i.e., they now
load source.)
Change-Id: I42287bfcdb1afef8ee84e5eac12534dd0a1fd5d2
Reviewed-on: https://go-review.googlesource.com/5653
Reviewed-by: Robert Griesemer <gri@golang.org>
Due to copy/paste from Google-internal branch.
I can't explain why I didn't test this; sorry.
Change-Id: I7b5f083a124c7cfb0fa6cb0506465a36bd79e983
Reviewed-on: https://go-review.googlesource.com/5654
Reviewed-by: Alan Donovan <adonovan@google.com>
While we're here, silence a print about failure to import fmt.
When it prints, it looks like a problem, and in fact the result
is never used in vet.
Change-Id: I76121b335026a2b09637608b997517be94fd167c
Reviewed-on: https://go-review.googlesource.com/5573
Reviewed-by: Rob Pike <r@golang.org>
I moved print.css into styles.css - to make it obvious that it needs to be
considered when modifying the styles.css. I use @media screen for all the
framwork related css, this means the @media print doesn't have to start
overriding each property - also there's less chance of a problem when
something isn't overridden.
Change-Id: Ic58e8c80df3339b55f67140a47866a232e0d30a3
Reviewed-on: https://go-review.googlesource.com/5526
Reviewed-by: Andrew Gerrand <adg@golang.org>
ssadump's -build=G option is now spelled -import; it was never related to ssa.
Change-Id: Ic21cd8b6990c0ffd25651c17a842a63bfa5019cf
Reviewed-on: https://go-review.googlesource.com/5172
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Argument indexes in a format string are one-based, however vet would not
warn when using a zero-index unless the type of the argument referenced
was not a string. That warning was misleading as it would say the type
was not a string. Vet will now print a correct warning when using a zero
index.
Included are tests for both cases.
Fixes#9752
Change-Id: I285e99990a86a653b4668b0c279d5f5f1c34f7aa
Reviewed-on: https://go-review.googlesource.com/3692
Reviewed-by: Rob Pike <r@golang.org>
Before this change, many kinds of error would cause the loader to stop.
making it brittle when analyzing large codebases, as in "godoc -analysis".
This change moves operations that used to occur during
configuration---(*build.Context).Import, loading, and parsing of
initial packages---into the Load call, and ensures that all failures
during Loading are reported at the end so that the maximum amount of
progress is made.
Also: redesign the tests and add many new cases.
Change-Id: Ia8cd99416af7c5d4a5fe133908adfa83676d401f
Reviewed-on: https://go-review.googlesource.com/3626
Reviewed-by: Robert Griesemer <gri@golang.org>
...to avoid namespace conflicts.
Also make its name "main", since it defines func main().
And fix 2 typos.
Change-Id: I7cf7894d6bed134907b3d2742255e5a82426071b
Reviewed-on: https://go-review.googlesource.com/3150
Reviewed-by: Robert Griesemer <gri@golang.org>
Most of the names have been brought in line with the names used in
testing/BenchmarkResult. For example, NsOp becomes NsPerOp.
Additionally, "Bench" becomes "Benchmark" and "BenchSet" becomes "Set".
Change-Id: I7dfca68a804e285a87ab9692b5bb99ccb676da7f
Reviewed-on: https://go-review.googlesource.com/2610
Reviewed-by: Rob Pike <r@golang.org>
This change adds a command mvpkg that will move a given package and
update all its imports. It uses similar logic to gorename to update
the imports.
Change-Id: Iebbd0b4c93c2302b0a71c3b99c68f6778106012a
Reviewed-on: https://go-review.googlesource.com/1973
Reviewed-by: Alan Donovan <adonovan@google.com>
This allows godoc.org to link to the source code. I chose to link to
github.com instead of googlesource.com because their file browser is
better.
Details here:
864b1c0aba
Change-Id: I962b3fadc822e753245f52240937be5c7e158dc7
Reviewed-on: https://go-review.googlesource.com/2719
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This lets go vet produce useful results for syscall on darwin/amd64,
otherwise it gets caught on asm.s.
Change-Id: I3daa49cf61eeada52eb9d4e94e40c4d21d1d5b2d
Reviewed-on: https://go-review.googlesource.com/2741
Reviewed-by: Rob Pike <r@golang.org>
Actually parse the strings to check them more accurately.
The particular problem it missed was that it didn't check
for control characters in the key. The only valid separator
is a space.
More tests.
Fixes#9500
Change-Id: Ib547e11c7e8d47d81eb8b1e8f1ab9c26174933df
Reviewed-on: https://go-review.googlesource.com/2685
Reviewed-by: Russ Cox <rsc@golang.org>
Godoc documentation did not mention the feature for showing example code
runnable by the testing package. Add a link to the testing package.
Update golang/go#9471
Change-Id: Ic15794c59732e9b0b42c5b16c60be0a47c41afa5
Reviewed-on: https://go-review.googlesource.com/2490
Reviewed-by: Andrew Gerrand <adg@golang.org>
Move the parser for benchmark output from cmd/benchcmp into its own
package, benchmark/parse.
The majority of the change is just moving code around. Instead of
implementing the '-best' flag in ParseBenchSet, it is now implemented in
its own function 'selectBest' in cmd/benchcmp.
Bench.Ord (the ordinal position of a Bench within a BenchSet) has been
exported.
Change-Id: Id27032a220f9ff2596117b58b86243998695a804
Reviewed-on: https://go-review.googlesource.com/2102
Reviewed-by: Rob Pike <r@golang.org>
Fixes various problems reported by go vet.
Change-Id: I12a6fdba8f911b21805d8e42903f8f6a5033790a
Reviewed-on: https://go-review.googlesource.com/2163
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This will match the default behavior when running locally.
In fact, our http://blog.golang.org/godoc-documenting-go-code explicitly
documents this feature (see also golang.org/cl/1953).
Change-Id: I581b17b60229ce70900cb51d548d1e2a34df41ba
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/2116
Reviewed-by: Andrew Gerrand <adg@golang.org>
Close the `<h3>` header tag with a closing `</h3>` tag to fix the HTML
syntax.
Change-Id: Ic86c5f31ec5550d6875aa085eed8da6a75881405
Reviewed-on: https://go-review.googlesource.com/2104
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Suggestion by dsymonds: Save code not data.
Add an extra element to the index array and an if can be eliminated.
Old generated code:
const _Day_name = "MondayTuesdayWednesdayThursdayFridaySaturdaySunday"
var _Day_index = [...]uint8{6, 13, 22, 30, 36, 44, 50}
func (i Day) String() string {
if i < 0 || i >= Day(len(_Day_index)) {
return fmt.Sprintf("Day(%d)", i)
}
hi := _Day_index[i]
lo := uint8(0)
if i > 0 {
lo = _Day_index[i-1]
}
return _Day_name[lo:hi]
}
New generated code:
const _Day_name = "MondayTuesdayWednesdayThursdayFridaySaturdaySunday"
var _Day_index = [...]uint8{0, 6, 13, 22, 30, 36, 44, 50}
func (i Day) String() string {
if i < 0 || i+1 >= Day(len(_Day_index)) {
return fmt.Sprintf("Day(%d)", i)
}
return _Day_name[_Day_index[i]:_Day_index[i+1]]
}
Change-Id: I6f46a4892d5813a12ec1ad01738c6a21c7e45172
Reviewed-on: https://go-review.googlesource.com/1990
Reviewed-by: David Symonds <dsymonds@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
At least in theory. We don't totally have it working yet. It does
run locally in the dev environment, though, which should be the same
as production, since it builds the Docker container locally.
But we're getting problems when pushing it to production.
Also some minor tweaks to the code with Andrew.
Change-Id: Id192669dbc8d3f86d9c8dad79764abd66e983895
Reviewed-on: https://go-review.googlesource.com/1761
Reviewed-by: Andrew Gerrand <adg@golang.org>
Rough work in progress. Don't hate.
Change-Id: I9d8247005724a21bdb5d4760cc6135bceb49f2d4
Reviewed-on: https://go-review.googlesource.com/1704
Reviewed-by: Andrew Gerrand <adg@golang.org>
The whicherrs query mode takes the position of an error and returns the set of constants, globals and types visible from within the scope of the error being queried.
It is meant to be used as a shortcut to find out which errors should be handled for a given functions call.
LGTM=adonovan
R=golang-codereviews, dominik.honnef, adonovan
CC=golang-codereviews
https://golang.org/cl/167420043
Previously, gorename rejected all method renamings if it would
change the assignability relation.
Now, so long as the renaming was initiated at an abstract
method, the renaming proceeds, changing concrete methods (and
possibly other abstract methods) as needed. The user
intention is clear.
The intention of a renaming initiated at a concrete method is
less clear, so we still reject it if it would change the
assignability relation. The diagnostic advises the user to
rename the abstract method if that was the intention.
Additional safety checks are required: for each
satisfy.Constraint that couples a concrete type C and an
interface type I, we must treat it just like a set of implicit
selections C.f, one per abstract method f of I, and ensure the
selections' meanings are unchanged.
The satisfy package no longer canonicalizes types, since this
substitutes one interface for another (equivalent) one, which
is sound, but makes the type names random and the error
messages confusing.
Also, fixed a bug in 'satisfy' relating to map keys.
+ Lots more tests.
LGTM=sameer
R=sameer
CC=golang-codereviews
https://golang.org/cl/173430043
Avoid error "could not import C (can't find import: C)"
Fixesgolang/go#9169.
LGTM=adonovan, r
R=golang-codereviews, adonovan, r
CC=golang-codereviews
https://golang.org/cl/184730043
"static" ignores dynamic calls altogether.
"cha" uses Class Hierarchy Analysis, which assumes that a
dynamic call may dispatch to any func or method that satisfies
the type.
Both these algorithms can work on partial programs,
e.g. libraries without a main function or tests.
(This feature was requested after my talk last night.)
+ Tests.
LGTM=sameer
R=sameer, minux
CC=golang-codereviews, gri
https://golang.org/cl/176780043
- print "oracle:" not "Error:" in error messages; remove period.
- allocate token.FileSet correctly.
- remove stale TODO (multiple test packages)
- fix typo and omission ('what') in usage message.
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/178860043
Such messages are more informative when the error occurs deep within a script.
Also: add tool name to digraph's usage messages.
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/173380043
(This functionality is provided by the oracle, but its output
format is inflexible, and the functionality is better suited
to a shell utility. I may remove the oracle 'callgraph' feature.)
See Usage for details.
+ Test.
LGTM=sameer
R=sameer
CC=golang-codereviews, gri
https://golang.org/cl/164460044
Rewrite performed with this command:
sed -i '' 's_code.google.com/p/go\._golang.org/x/_g' \
$(grep -lr 'code.google.com/p/go.' *)
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/170920043
Add tests for recently introduced asm error checks in vet.
This adds tests for the new warnings about functions that
don't store to their return slot before returning or that
store to SP-relative addresses in or beyond the argument
frame. It also adds a test for leaf function handling on arm,
where the link register is not implicitly saved.
LGTM=rsc
R=rsc
CC=adg, golang-codereviews, r
https://golang.org/cl/166040044
vet now includes function names in its error messages about
assembly code. Update the error test patterns to account for
this and expand some patterns to check that go vet discovers
the function name correctly.
Fixesgolang/go#9041
LGTM=r
R=adg, r, rsc
CC=golang-codereviews
https://golang.org/cl/170940044
(They may contain any character, after all.)
Also, allow but don't require parens and stars.
e.g. (*"encoding/json".Decoder).Decode or "encoding/json".Decoder.Decode
but not encoding/json.Decoder.Decode.
Since -from queries are now Go expressions, we use the Go parser.
(Thanks to Rog Peppe for the suggestion.)
LGTM=sameer
R=sameer
CC=golang-codereviews, gri, rogpeppe
https://golang.org/cl/154610043
This adds support for checking moves to the return value stack
slot (from rsc), adds support for checking power64x assembly,
fixes argument offset checking and leaf function support on
platforms with a link register (arm and power64).
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/166920043
Example: show the transitive closure of imports of the digraph tool itself:
% go list -f '{{.ImportPath}}{{.Imports}}' ... | tr '[]' ' ' |
digraph forward code.google.com/p/go.tools/cmd/digraph
+ basic test.
LGTM=gri
R=gri, sameer
CC=golang-codereviews
https://golang.org/cl/161760043
Initializing the unused variable formatterType (it will be used soon) was
panicking if the import couldn't be done, but vet shouldn't be so fragile.
LGTM=gri
R=gri
CC=dsymonds, golang-codereviews
https://golang.org/cl/153480044
Fixesgolang/go#8792.
This is a simple change that fixes the issue. It may be desireable
to opt for a larger code change that makes this problem less likely
to be inadvertedly reintroduced in the future. For instance, a vetMain()
func can be used similar to gofmtMain(), or the os.Exit call can be
deferred.
LGTM=r
R=golang-codereviews, r
CC=golang-codereviews
https://golang.org/cl/150850043
See the usage message in main.go for orientation.
To the best of my knowledge, the tool implements all required
soundness checks, except:
- the dynamic behaviour of reflection is obviously undecidable.
- it rejects method renamings that change the "implements" relation.
It should probably be more aggressive.
- actually it only checks the part of the "implements" relation
needed for compilation. Understanding the dynamic behaviour
of interfaces is obviously undecidable.
- a couple of minor gaps are indicated by TODO comments.
Also:
- Emacs integration.
- tests of all safety checks and (some) successful rewrites.
LGTM=dominik.honnef, sameer
R=gri, sameer, dominik.honnef
CC=golang-codereviews
https://golang.org/cl/139150044
To avoid breaking URLs, we redirect /src/pkg/* to /src/*.
The URL /pkg is now the "directory" /src, which triggers the
"Packages" index.
All other references to "src/pkg" are now gone,
except a number in the namespace documentation which are
probably still illustrative.
Tested: go test cmd/godoc godoc
Manual inspection of src and src/pkg pages.
with GOROOT and GOPATH packages
-analysis
/AUTHORS file URL still works
LGTM=bradfitz, adg
R=bradfitz, adg
CC=golang-codereviews
https://golang.org/cl/141770044
Documentation change only. The binary will not be installed
using the "go tool" mechanism.
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/133710046
(godoc is excluded from this CL since it will continue to use
/src/pkg in its URL namespace, making the necessary cleanup
more subtle.)
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/141770043
Missed comment from previous code review.
Next up: execution tests so this won't happen again
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/134480043
Improve the generated code by using a const instead of a var for the names string.
This requires some refactoring to get neat const() and var() blocks.
Also change the generate map code go use a single sliced string, to reduce the
size of the compiled representation (only one string value).
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/135450044
Refactor a little to make testing easier.
Add golden tests and a check fo splitIntoRuns, which is the subtlest piece.
Still to come: execution tests.
Also fix a few issues in the generated code.
LGTM=gri
R=gri
CC=golang-codereviews, josharian
https://golang.org/cl/134450044
This tool creates String methods from constant definitions.
It's a time-saver designed to be used from go generate.
The methods generated are efficient, more so than one
is likely to create by hand.
Given
package date
type Day int
const (
Monday Day = iota
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
)
the command
stringer -type Day
will create the file day_string.go containing
package date
import "fmt"
var (
_Day_indexes = []uint8{6, 13, 22, 30, 36, 44, 50}
_Day_names = "MondayTuesdayWednesdayThursdayFridaySaturdaySunday"
)
func (i Day) String() string {
if i < 0 || i >= Day(len(_Day_indexes)) {
return fmt.Sprintf("Day(%d)", i)
}
hi := _Day_indexes[i]
lo := uint8(0)
if i > 0 {
lo = _Day_indexes[i-1]
}
return _Day_names[lo:hi]
}
There are several strategies for the created method chosen according to
the structure of the sequence of constants.
Handles integer types only, both signed and unsigned. That's probably
all that is needed.
Tests to follow, but the test structure will be large so sending this out
separately. The code has been heavily hand-tested but there are
some bugs. Don't depend on this until the tests are installed.
LGTM=gri
R=gri, josharian
CC=golang-codereviews
https://golang.org/cl/136180043
LookupFieldOrMethod now also decides whether a found
method is actually in the method set. Simplifies call
sites. Added corresponding API tests.
TODO (separate CL): Decide what the correct value for
the indirect result should be (as required for code
generation). For now, the result value for indirect
is unchanged from before if a field/method is found.
Fixesgolang/go#8584.
LGTM=adonovan
R=adonovan
CC=golang-codereviews
https://golang.org/cl/132260043
e.g. chmod +w, checkout.
Also: add a TIPS section to the documentation.
LGTM=crawshaw
R=crawshaw, gri
CC=golang-codereviews
https://golang.org/cl/136780044
Be careful not to complain about math.Log and cmplx.Log.
Seems worthwhile since t.Log and t.Logf are often written but
rarely executed.
Nothing new turned up in the standard library.
Fixesgolang/go#8504.
LGTM=josharian, dsymonds
R=golang-codereviews, josharian, dsymonds
CC=golang-codereviews
https://golang.org/cl/130490043
s/enclosed by function/captured by func literal/
Users complained. They often do.
LGTM=josharian, adg
R=golang-codereviews, josharian, nightlyone, minux, adg
CC=golang-codereviews
https://golang.org/cl/132080043
This CL aims to fix the problem described here:
https://groups.google.com/forum/#!topic/golang-nuts/R6ms1n9KjiY
This makes it easier to parse via external tools such as editors. Editors can
show each function in a list and jump directly to each function with this
additional information. This pattern can be seen in other Go tools such as "go
test" in the form of:
--- FAIL: TestCover (0.52 seconds)
cover_test.go:43: example error
LGTM=adg
R=r, adg, josharian, dave
CC=golang-codereviews
https://golang.org/cl/131820043
We want to make an if look like two blocks and have the coverage
report for the else block decorate the "else" keyword with the right
color. To do this, we adjust the apparent starting point of the else
block to include the "else".
The previous code assumed the way to do this was to move the
width of "else " backwards from the else block's opening brace, but
that assumes there is a space there. Instead, we now just start the
else block exactly at the end of the if block. Simpler, cleaner, and
fixes a bug.
Fixesgolang/go#8557.
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/127620043
As requested on Stack Overflow: http://goo.gl/ams9fY
(Kudos to sberry for his JavaScript solution, provided there.
This change does the same thing on the server side.)
LGTM=r
R=r
CC=golang-codereviews
https://golang.org/cl/127030043
And serialize the printing of each item with a mutex.
It is the formatted output of this tool, after all.
Also: minor doc tweaks.
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/114620044
`go test` takes -run and -bench; the -test.run and -test.bench flags
are only for the test binary itself.
LGTM=adg
R=adg
CC=golang-codereviews
https://golang.org/cl/113390043
This change allows the directory front page to be more easily configurable.
Templates are now read only at start-up and stored in a map rather than re-parsed for each page rendering.
LGTM=adg
R=adg
CC=golang-codereviews
https://golang.org/cl/109080044
text/tabwriter cells are tab-terminated, not tab-separated. This creates trailing whitespace. However, with left-aligned columns, it is ok not to treat the final element as a cell. Demo: http://play.golang.org/p/m_ajG8SSZe
LGTM=gri
R=golang-codereviews, gobot, gri
CC=golang-codereviews, r
https://golang.org/cl/103650043
This CL introduces two vet checks. Statistics and code below are from a recent 50mb corpus of public code.
1. Check for redundant conjunctions and disjunctions. This check caught 26 instances, of which 20 were clearly copy/paste bugs and 6 appeared to be mere duplication. A typical example:
if xResolution < 0 || xResolution < 0 {
panic("SetSize(): width < 0 || height < 0")
}
2. Check for expressions of the form 'x != c1 || x != c2' or 'x == c1 && x == c2', with c1 and c2 constant expressions. This check caught 16 instances, of which all were bugs. A typical example:
if rf.uri.Scheme != "http" || rf.uri.Scheme != "ftp" {
rf.uri.Scheme = "file"
}
Fixesgolang/go#7622.
LGTM=rsc, r
R=golang-codereviews, jscrockett01, r, gri, rsc
CC=golang-codereviews
https://golang.org/cl/98120043
Really two fixes: Don't panic on bad instructions and don't complain about commented out instructions.
LGTM=r
R=r
CC=golang-codereviews
https://golang.org/cl/110070044
Clients such as compilers need this information in order
to correctly link against imported packages.
This also adds support for the condensed import data format
where the priority information is stored as a suffix of the
condensed import data, as well as support for archive files.
LGTM=gri
R=gri
CC=golang-codereviews, iant
https://golang.org/cl/78740043
Bare init functions omit calls to dependent init functions and the
use of an init guard. They are useful in cases where the client uses
a different calling convention for init functions, or cases where
it is easier for a client to analyze bare init functions.
LGTM=adonovan
R=adonovan
CC=golang-codereviews, iant
https://golang.org/cl/78780043
This is a common source of bugs, particularly for those new to Go. Running this on a corpus of public code flagged 114 instances.
This check may need to be updated once issue 7363 is resolved.
LGTM=r
R=golang-codereviews, r
CC=bradfitz, golang-codereviews
https://golang.org/cl/91010047
In command godoc, set IndexEnabled when the -write_index flag is set.
Previously you would need to (unintuitively) set the -http flag to
achieve this.
In package godoc, set up the FS tree before loading the index, and
then return before starting the index refresh loop. Previously the
index would be loaded and then immediately refreshed, negating the
benefits of the on-disk index.
TBR=bradfitz
R=golang-codereviews
CC=golang-codereviews
https://golang.org/cl/103370046
This removes much of the AST logic out of main.go,
and makes it easier to build custom vet binaries
The trade-off in this change is for flexibility.
There's very little change in the per-check files,
a lot less code in main.go (specifically the AST walking
logic has shrunk), and it makes it much easier to build
custom vet binaries simply by dropping new source files
in the directory.
LGTM=josharian, r
R=r, josharian, kamil.kisiel
CC=golang-codereviews
https://golang.org/cl/83400043
This will fix the images in Brad's GoCon presentation.
LGTM=bradfitz
R=golang-codereviews, bradfitz
CC=golang-codereviews
https://golang.org/cl/100950043
Also fixes the following nits;
- literal IPv6 address handling
- URL host component handling in the case of a wildcard listen
- URL port component handling in the case of no port component in origin
Fixesgolang/go#8096.
LGTM=dan.kortschak, adg
R=adg, golang-codereviews, dan.kortschak
CC=golang-codereviews
https://golang.org/cl/102770046
If you have multiple runs in old.txt and new.txt
the default behavior is to match them up pairwise
and compare successive pairs (and if you have a
different number of runs in each file, benchcmp
refuses to do anything).
The new -best flag changes the behavior to instead
compare the fastest run of each benchmark from
the two files. This makes sense if you believe that
the fastest speed is the 'actual' speed and the slower
results are due to the computer spending time doing
non-benchmark work while the benchmark was
running.
LGTM=josharian
R=golang-codereviews, josharian
CC=golang-codereviews
https://golang.org/cl/102890047
They were disabled by mistake during the move to go.tools.
LGTM=dan.kortschak
R=golang-codereviews, dan.kortschak
CC=golang-codereviews
https://golang.org/cl/98440048
It was very ugly; a little tweaking helps godoc parse it better.
Also make unsafeptr.go not own the package doc (add a blank line)
and put one more sentence about that check into doc.go.
Fixesgolang/go#7925.
LGTM=bradfitz
R=golang-codereviews, bradfitz
CC=golang-codereviews
https://golang.org/cl/98370044
Ignore calls to various flavours of atomic.AddInt with a wrong
number of arguments.
LGTM=r
R=golang-codereviews, r
CC=golang-codereviews
https://golang.org/cl/91370045
The old code printed the underlying type; e.g., the type
of time.Millisecond was reported to be int64 rather than
time.Duration.
Testsuite (and corresponding tests) in progress (another CL).
LGTM=adonovan
R=adonovan, dsymonds
CC=golang-codereviews
https://golang.org/cl/94770045
Assuming:
1) package declaration does not exist
2) the Fragment option is set
3) a main function exists
We will assume it is a main package and add the declaration.
This change also sets the Fragment option in goimports.
LGTM=crawshaw, bradfitz
R=bradfitz, crawshaw
CC=golang-codereviews
https://golang.org/cl/96850044
(The test thread is racing with the analysis thread, which
takes around 4ms on this input.)
LGTM=gri
R=gri, bradfitz
CC=golang-codereviews
https://golang.org/cl/89780044
The text and images are "baked in" to the godoc executable's
rodata section (~300KB) and are accessible from the godoc
server itself at /lib/godoc/analysis/help.html.
In due course, the page will become visible at
http://golang.org/lib/godoc/analysis/help.html, which will be
the canonical location for this doc (in announcements, etc).
The page is temporarily visible here, for those on the Google corp network:
http://172.26.104.127:7777/lib/godoc/analysis/help.html
Also:
- add link to new doc from source view pages.
- document -analysis flag in cmd/godoc/doc.go
- fix indentation of -analysis flag's help string
LGTM=gri
R=gri, bgarcia, r
CC=golang-codereviews
https://golang.org/cl/87110045
Details:
- auto-generate prefixes for std lib (e.g., "godex big" works now)
- apply filtering to package-level objects only
- nicer formatting of single-entry const, var, or type declaration
TBR=adonovan
R=adonovan
CC=golang-codereviews
https://golang.org/cl/81360046
All of these work now as expected:
godex code.google.com/p/go.tools/go/types
godex go.tools/go/types
godex go/types
godex types
Also improved logging/verbose mode.
LGTM=adonovan
R=adonovan
CC=golang-codereviews
https://golang.org/cl/80930043
1) Split a path.name argument at the last '.' that
is not part of the path.
2) Try various importers always in the same order
for consistent results (use lists instead of maps).
LGTM=adonovan
R=adonovan
CC=golang-codereviews
https://golang.org/cl/80790043
See analysis.go for overview of new features.
See README for known bugs and issues.
Much UI polish, testing and optimization work remains, but
this is a starting point.
Flag: we add a new flag -analysis=type,pointer, default "",
for adventurous users only at this stage.
Type analysis takes ~10s for stdlib + go.tools;
Pointer analysis (currently) takes several minutes.
Dependencies: we now include jquery.treeview.js and its GIF
images among the resources. (bake.go now handles binary.)
LGTM=crawshaw, bgarcia
R=crawshaw, bgarcia
CC=bradfitz, golang-codereviews
https://golang.org/cl/60540044
It's pointless.
Also this fixes a crash, because the blank identifier no longer appears as a
defined object after CL 74190043 so we were getting nil pointer violations.
Even better, we get to re-enable a disabled test.
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/75140043
Now we can say
vet -printf=false
to disable the printf test but run all others.
Implemented by creating a tri-state boolean flag that records whether it has been
set explicitly; before this, -printf=false was not distinguishable from not having
mentioned the printf flag at all.
Fixesgolang/go#7422.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/72330043
Over time, a number of modules were added that used Warn instead of Bad
to report problems with the code, but the documentation states that
if there is a problem, the exit code must be 1, not 0. Warn does not set the
exit code and should be used only for internal errors and messages
triggered by the -v flag.
There's nothing substantive here except calling the other function in a few
places.
Fixesgolang/go#7017.
LGTM=crawshaw
R=golang-codereviews, crawshaw
CC=golang-codereviews
https://golang.org/cl/71860044
The old code was misleading in saying how many args were present.
Change the wording of the message to be unambiguous and change
the presentation of the format to include the full directive, making
it easier to correlate with the input (and fixing a silent bug).
Fixesgolang/go#6248.
LGTM=dsymonds
R=golang-codereviews, dsymonds
CC=golang-codereviews
https://golang.org/cl/69120044
An identifier X in anonymous struct field struct{X} is both a
definition of a field (*Var) and reference to a type
(*TypeName). Now that we have split the map, we can capture
both of these aspects.
Interestingly, every client but one was going to extra effort
to iterate over just the uses or just the defs; this
simplifies them.
Also, fix two bug related to tagless switches:
- An entry was being recorded in the Object map for a piece of
synthetic syntax.
- The "true" identifier was being looked up in the current scope,
which allowed perverse users to locally redefine it. Now
we use the bool (not untyped boolean) constant true, per the
consequent clarification of the spec (issue 7404).
+ tests.
Fixesgolang/go#7276
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/68270044
How it handles packages vs. directories vs. files was not explained.
LGTM=rsc
R=golang-codereviews, gobot, rsc
CC=golang-codereviews
https://golang.org/cl/67150043
benchcmp now preserves benchmark order. This restores the original
misc/benchcmp behavior. This also makes the output of benchcmp stable,
and groups together multiple -cpu results.
Magnitude-based sorting is still available via the -mag flag.
It is useful for surfacing items of note (particularly changes
in allocs) when making compiler changes and running broad
benchmarks.
Fixesgolang/go#7259.
LGTM=dave
R=dave, mtj
CC=bradfitz, dvyukov, golang-codereviews
https://golang.org/cl/60840045
These are the simplest possible descriptions of each command.
They may be fleshed out later.
Fixesgolang/go#7298.
LGTM=r
R=r
CC=golang-codereviews
https://golang.org/cl/61480044
Don't say the word "fork" (not accurate), and remove the
tab/comment flags that were removed from gofmt.
LGTM=adg
R=golang-codereviews, adg
CC=golang-codereviews
https://golang.org/cl/61410052
Previously, each word could be a package import path or a
comma-separated list of *.go file names. Now, if the
first word ends with ".go", all words are assumed to be
Go source files. This makes it impossible to specify
two ad-hoc packages from source files, but no-one needs that.
FromArgs also takes a boolean indicating whether tests
are wanted or not.
Also: ssadump: add -test flag to set that boolean.
For the oracle it's always true.
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/61470047
Method-set caching is now performed externally using a MethodSetCache (if desired), not by the Types themselves.
This a minor deoptimization due to the extra maps, but avoids a situation in which method-sets are computed and frozen prematurely. (See b/7114)
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/61430045
This is intended to replace the awk-based misc/benchcmp.
It mostly matches the existing misc/benchcmp.
Notable changes:
* Written in Go.
* Minor whitespace changes in the output; the tabular nature of the
output is preserved, as is most number formatting and verbiage.
* Comparisons within each section are sorted from highest change to lowest.
* Proper handling of multiple benchmarks with the same name (issue 7016).
* Does not omit benchmark comparisons for which the new value is zero.
* Adds -changed flag to only show benchmarks whose value have changed.
Useful for memory-oriented, large-scale benchmark comparisons.
* Has tests.
* Formats small ns measurements with extra precision.
Updates golang/go#7016.
LGTM=r
R=golang-codereviews, dave, dvyukov, oleku.konko, bradfitz, gobot, r
CC=golang-codereviews
https://golang.org/cl/47980043
This results in significant improvement to type-checking time:
it reduces by 4% the entire running time of ssa/stdlib_test
(GOMAXPROCS=8, n=7).
LGTM=gri
R=gri
CC=golang-codereviews
https://golang.org/cl/57770043
The Importer type has been replaced with Config and Program.
Clients populate a Config, directly or more usually via
convenience functions. They then call its Load() method to do
all of the typechecking and transitive-closure computation.
ssa.NewProgram and ssa.CreatePackages have been fused into
ssa.Create, which now cannot fail, since (*Config).Load()
reports all type errors.
Also:
- The addition of an ssa.GlobalDebug builder mode flag
eliminates a loop-over-packages repeated in many clients.
- PackageInfo.Err flag unexported. Clients never see bad infos now.
- cmd/ssadump: now only looks for func "main" in package "main".
- importsOf deleted, was dead code.
STILL TODO:
- ParseFile seems like API creep (though it's convenient)
and CreateFromFiles is dangerous (w.r.t. FileSet identity).
Need to think more...
- the need for clients to rely on elementwise correspondence
of Config.CreatePkgs and Program.Created is a little sad.
- The command-line interface has not changed.
That will happen in a follow-up.
r recommends using a repeated flag: -package p -package q ...
R=gri
CC=axwalk, frederik.zipp, golang-codereviews
https://golang.org/cl/49530047
Packages were not being created for all types.Packages,
specifically, indirectly imported packages were missing.
(*Program).CreatePackages now iterates over the type-checker's
package map too.
Also: removed all concurrency from importer. I think it was
incorrect (and hard to fix).
Also: change LoadInitialPackages so that all named packages
are loaded from source. This happens regardless of whether
GCImporter is used to satisfy imports.
Details:
- importer.Config.SourceImports flag determines whether to
load all packages from *.go source.
(Before, this was indicated by Config.Build != nil.)
- importer.Config.Build field effectively defaults to
&go/build.Default. A zero importer.Config is now usable.
- importer.Importer.Config field is now exported.
- LoadPackage renamed to ImportPackage since the resulting
packages may come from GCImporter (and be incomplete).
- doImport and ImportPackage fused.
Fixesgolang/go#7028
R=gri, axwalk
CC=golang-codereviews
https://golang.org/cl/48770043
Also report an error for "cross-interpretation": not supported
due to the interpreter's assumption that host and target
{int,uint,uintptr} are the same. (Too tedious and messy to fix.)
Tested manually:
% cat d.go
package main
const m = ^uintptr(0)
const w = m>>8&1 + m>>16&1 + m>>32&1
func main() { println(m, w) }
% ./ssadump -build=P -run d.go
package main:
const m m = 18446744073709551615:uintptr
const w w = 3:uintptr
18446744073709551615 3
% GOARCH=386 ./ssadump -build=P -run d.go
package main:
const m m = 4294967295:uintptr
const w w = 2:uintptr
Error: Cross-interpretation is not yet supported (target has GOARCH 386, interpreter has amd64).
Fixesgolang/go#7080
R=gri
CC=golang-codereviews
https://golang.org/cl/49070043
The display of search results can now be changed. A slice of functions for displaying the results can now be provided. By default, three functions are provided to display documentation, source code, and textual results.
This makes it possible to replace them with equivalents that, say,
obtain search results from alternative source code search engines.
R=bradfitz, adg
CC=golang-codereviews
https://golang.org/cl/43470043
Not for Go 1.2. Still needs a flag.
Linux at least (and likely other OSes) don't like you doing
a few hundred readdirs at once and spawing as many threads.
R=golang-dev, adg, jeremyjackins
CC=golang-dev
https://golang.org/cl/30620043
Command set:
- what: an extremely fast query that parses a single
file and returns the AST stack, package name and the
set of query modes that apply to the current selection.
Intended for GUI tools that need to grey out UI elements.
- definition: shows the definition of an identifier.
- pointsto: the PTA features of 'describe' have been split
out into their own command.
- describe: with PTA stripped out, the cost is now bounded by
type checking.
Performance:
- The importer.Config.TypeCheckFuncBodies predicate supports
setting the 'IgnoreFuncBodies' typechecker flag on a
per-package basis. This means we can load dependencies from
source more quickly if we only need exported types.
(We avoid gcimport data because it may be absent or stale.)
This also means we can run type-based queries on packages
that aren't part of the pointer analysis scope. (Yay.)
- Modes that require only type analysis of the query package
run a "what" query first, and restrict their analysis scope
to just that package and its dependencies (sans func
bodies), making them much faster.
- We call newOracle not oracle.New in Query, so that the
'needs' bitset isn't ignored (oops!). This makes the
non-PTA queries faster.
Also:
- removed vestigial timers junk.
- pos.go: existing position utilties split out into own file.
Added parsePosFlag utility.
- numerous cosmetic tweaks.
+ very basic tests.
To do in follow-ups:
- sophisticated editor integration of "what".
- better tests.
- refactoring of control flow as described in comment.
- changes to "implements", "describe" commands.
- update design doc + user manual.
R=crawshaw, dominik.honnef
CC=golang-dev, gri
https://golang.org/cl/40630043
Using a type containing a sync type directly
in a function call (whether as a receiver,
a param, or a return value) is an easy way
to accidentally copy a lock or other sync primitive.
Check for it.
The test as implemented does not provide 100%
coverage; see the discussion near the bottom of
testdata/copylock.go for shortcomings.
Fixesgolang/go#6729.
R=adg, r, dsymonds
CC=golang-dev
https://golang.org/cl/23420043
Split the profile parsing code out of cmd/cover into
a reusable package, to support third-party coverage
tools.
R=golang-dev, r, adg
CC=golang-dev
https://golang.org/cl/36050045
Add explicit options to Corpus to control search indexing of documentation, Go source code, and full-text.
R=bradfitz, r
CC=golang-dev
https://golang.org/cl/24190043
- fixed a couple of TODOs
- various cleanups along the way
- adjusted clients
Once submitted, clients of go/types that don't explicitly
specify Config.Import will need to add the extra import:
import _ "code.google.com/p/go.tools/go/gcimporter"
to install the default (gc) importer in go/types.
R=adonovan, gri
CC=golang-dev
https://golang.org/cl/26390043
Performance increase is much smaller than expected;
need to investigate. Possibly, repeatedly (for each
line) accessing file sets from multiple goroutines
(in the scanner) is a bottle neck; or perhaps i/o.
R=adonovan
CC=golang-dev
https://golang.org/cl/23090043
The symbolic names such as NOSPLIT for annotations on the TEXT
directive appeared after vet started checking .s files. This CL tweaks
the regular expression to allow CAPITALS and the symbols | and +
as well as digits in that field, and interprets NOSPLIT as equivalent
to 7 in that field. All magic.
Fixesgolang/go#6695
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/18700044
This CL makes gotype usable again. Removed -r
(recursive) mode; use go/build to determine
the correct set of Go files when processing
a directory. The -v (verbose) mode now prints
some basic stats (duration, number of files,
lines, and lines/s).
Thoroughly restructured the code.
Applying gotype -v -a . to the go/types directory:
128.94141ms (40 files, 12008 lines, 93127 lines/s)
On a 2.8 GHz Quad-Core Intel Xeon, 800 MHz DDR2 FB-DIMM,
with go/types built with the (interal) debug flag set to
false. There's still quite a bit of room for performance
improvement in all parts of the code since no tuning has
been done.
R=golang-dev, adonovan
CC=golang-dev
https://golang.org/cl/19930043
This allows us to run/analyze multiple tests.
Also it causes the production code packages to be properly initialized.
Also:
- cmd/ssadump: improved usage message (add example;
incorporate LoadInitialPackages usage; explain how -run
finds main).
- pointer, oracle, ssa/interp: use CreateTestMainPackage.
- ssa/builder.go: remove 'rundefers' instruction from package init,
which no longer uses 'defer'.
R=gri
CC=golang-dev
https://golang.org/cl/15920047
A function such as this:
func one() (x int) {
defer func() { recover() }()
x = 1
panic("return")
}
that combines named return parameters (NRPs) with deferred calls
that call recover, may return non-zero values despite the
fact it doesn't even contain a return statement. (!)
This requires a change to the SSA API: all functions'
control-flow graphs now have a second entry point, called
Recover, which is the block at which control flow resumes
after a recovered panic. The Recover block simply loads the
NRPs and returns them.
As an optimization, most functions don't need a Recover block,
so it is omitted. In fact it is only needed for functions that
have NRPs and defer a call to another function that _may_ call
recover.
Dataflow analysis of SSA now requires extra work, since every
may-panic instruction has an implicit control-flow edge to
the Recover block. The only dataflow analysis so far implemented
is SSA renaming, for which we make the following simplifying
assumption: the Recover block only loads the NRPs and returns.
This means we don't really need to analyze it, we can just
skip the "lifting" of such NRPs. We also special-case the Recover
block in the dominance computation.
Rejected alternative approaches:
- Specifying a Recover block for every defer instruction (like a
traditional exception handler).
This seemed like excessive generality, since Go programs
only need the same degenerate form of Recover block.
- Adding an instruction to set the Recover block immediately
after the named return values are set up, so that dominance
can be computed without special-casing.
This didn't seem worth the effort.
Interpreter:
- This CL completely reimplements the panic/recover/
defer logic in the interpreter. It's clearer and simpler
and closer to the model in the spec.
- Some runtime panic messages have been changed to be closer
to gc's, since tests depend on it.
- The interpreter now requires that the runtime.runtimeError
type be part of the SSA program. This requires that clients
import this package prior to invoking the interpreter.
This in turn requires (Importer).ImportPackage(path string),
which this CL adds.
- All $GOROOT/test/recover{,1,2,3}.go tests are now passing.
NB, the bug described in coverage.go (defer/recover in a concatenated
init function) remains. Will be fixed in a follow-up.
Fixesgolang/go#6381
R=gri
CC=crawshaw, golang-dev
https://golang.org/cl/13844043
Break the basic block at the function literal. The code to do this analysis
was already there; this CL just factors it out more nicely and uses it in
one new place. Also adds a test.
Fixesgolang/go#6555.
R=golang-dev, adg
CC=golang-dev
https://golang.org/cl/14601043
- removed support for nil constants from go/exact
- instead define a singleton Nil Object (the nil _value_)
- in assignments, follow more closely spec wording
(pending spec CL 14415043)
- removed use of goto in checker.unary
- cleanup around handling of isRepresentable for
constants, with better error messages
- fix missing checks in checker.convertUntyped
- added isTyped (== !isUntyped) and isInterface predicates
- fixed hasNil predicate: unsafe.Pointer also has nil
- adjusted ssa per adonovan
- implememted types.Implements (wrapper arounfd types.MissingMethod)
- use types.Implements in vet (and fix a bug)
R=adonovan, r
CC=golang-dev
https://golang.org/cl/14438052
Present the files in lexical order so the output is reproducible
and easier to navigate. Do a little type rearrangement to simplify
things while we're there.
R=adg
CC=golang-dev
https://golang.org/cl/14357043
The redirect.PrefixHandler redirects "/foo/" to "/foo", which is what
we want in most cases ("/cl/", "/change/", etc) but not here.
So wrap it with a handler that handles "/blog/" explictly.
R=dsymonds
CC=golang-dev
https://golang.org/cl/14326043
