The next in the sequence of CLs to convert to using protocol positions.
Change-Id: Ib3421bfc73af1b546b60c328ca66528cb9031e19
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193719
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This cl is the first in a set that change the configuration behaviour.
This one should have no behaviour differences, but makes a lot of preparatory changes.
The same options are set to the same values in the same places.
The options are now stored on the Session instead of the Server
The View supports options, but does not have any yet.
Change-Id: Ie966cceca6878861686a1766d63bb8a78021259b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193726
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The existing code uses maps to associate requests with responses. This
change adds locking to avoid simultaneous and illegal reads and writes.
Change-Id: I7bfb21cad6b37ac25e4f6946cb660d82f23c2b80
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193058
Run-TryBot: Peter Weinberger <pjw@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Folding ranges need to be computed to present folding ranges that make
sense when lineFoldingOnly is true. This change computes the folding
ranges to include the lines that are contained within the start and end
parenthesis/braces when applicable.
Folding ranges are not returned when the contained nodes begin or end on
the same lines as the parenthesis/brace. This is to avoid misleading
folding ranges like the following in unformatted code:
if true {
fmt.Println("true") } else {
fmt.Println("false")
}
---folding "if true {}"--->
if true {
fmt.Println("false")
}
Change-Id: I2931d02837ad5f2dd96cc93da5ede59afd6bcdce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192678
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In shouldRunGopackages we would reset a goFile's metadata and pkgs in
advance of re-running go/packages. However, if we did not end up
running go/packages for whatever reason (read: we got canceled), the
goFile gets stuck in the unfortunate state of not belonging to any
packages because "pkgs" is empty. I think this leads to "no
CheckPackageHandle" errors, at least in relation to GetCachedPackage()
calls.
Fix by deferring the reset of goFile's metadata and pkgs until after
the go/packages call has succeeded.
Change-Id: I95aace85c026e1232b42cadee9e7772951c817d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193601
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change propagates the file handle through the type-checking
process, ensuring that the same handle is used throughout. It also
removes the ordering constraint that f.mu needs to be acquired before
f.handleMu. To make this more correct, we should associate a cached
package only with a FileHandle, but this relies on correct cache
invalidation, so that will be addressed in future changes.
Updates golang/go#34052
Change-Id: I6645046bfd15c882619a7f01f9b48c838de42a30
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193718
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We had previously been returning the metadata map in a few of the
loading functions. We don't actually need the map; we only need the
actual metadata. The race was caused by the return of the f.meta field
in a few functions, unprotected by the f.mu lock. This was likely a
result of the f.mu lock being added after the fact.
Fixesgolang/go#33978
Change-Id: Ice5778d9d6dea23304237baf321b55d4fee6599c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193717
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There are issues with contexts being propagated through the calls to
type-checking, and I think that a lot of these were related to us using
the importer's context. Instead, we should propagate the context from
the store as much as possible - only using the importer's context when
absolutely necessary (in the call to Import). This change propagates the
correct context where possible.
Updates golang/go#34103
Change-Id: I4bdc37d014ee1f775b720c9e7ad8abffffcf6ba3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193480
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This feature has been in an experimental state for a long enough time
that I think we can enable it by default at master.
Change-Id: I9bbb8b41377719f0e97f608f6e5163a883a176b3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192259
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The memoize store passes a detached context to the value getter
function. This is important since if the value getter experiences a
context cancellation it will end up caching context.Canceled, which
you never want. When type checking, we were ignoring the detached
context and using the "real" request context. This would cause the
context.Canceled error to get cached and continue popping up in
various situations.
Fix by swapping the importer's context to the detached context. It is
a little messy since the importer stores the context as a field. I
added a defer to restore the original context since it doesn't seem
correct to let the detached context escape the memoize function.
Updates golang/go#33678
Change-Id: I20dd466b0072ac2e856adbe993364f77e93ab054
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192719
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
If the client registers with foldingRange.lineFoldingOnly = true, only
return folding ranges that span multiple lines. Do this as they are
computed, so that if other filtering is applied later, we do not include
ranges that would go unused by the client anyway.
Change-Id: I27ea24428d25f180e26892de0f6d16c211225bf7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192477
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
FoldingRanges may be nested. Test nested folding ranges by separating
out the folding ranges by nested level and checking each level.
Change-Id: I12c72daa3e6c6b9d4959209b3a41b27e2b59866f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192398
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The existing implementation did not suggest struct field names
when running completion from within a slice literal of
pointers. Now, struct field names are suggested in that case.
Fixesgolang/go#33211
Change-Id: I6028420a9a789846b070fcc6e45ec89dc4d898d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192277
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Invert "useDeepCompletions" config flag to "disableDeepCompletion" and
separate out "disableFuzzyMatching" which reverts to the previous
prefix matching behavior.
I separated fuzzy matching tests out to a separate file so they aren't
entangled with deep completion tests. In coming up with representative
test cases I found a couple issues which I fixed:
- We were treating a fuzzy matcher score of 0 as no match, but the
matcher returns 0 for candidates that match but have no bonuses. I
changed the matcher interface so that a score of 0 counts as a
match. For example, this was preventing a pattern of "o" from
matching "foo".
- When we lower a candidate's score based on its depth, we were
subtracting a static multiplier which could result in the score
going negative. A negative score messes up future score weighting
because multiplying it by a value in the range [0, 1) makes it
bigger instead of smaller. Fix by scaling a candidate's score based
on its depth rather than subtracting a constant factor.
Updates golang/go#32754
Change-Id: Ie6f9111f1696b0d067d08f7eed7b0a338ad9cd67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The "Organize imports" code action uses internal/imports that needs a
valid GOPATH set. Since Go 1.8 setting GOPATH manually is not required,
and if it isn't set gopls will sometimes fail to properly import
packages.
This CL sets GOPATH to the default if the env var GOPATH isn't set.
Fixesgolang/go#33918.
Change-Id: Ib63a26a801e15af730197999de4d1d4901694a30
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191600
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Prepare rename gets the range of the identifier to rename. Returns an
error when there is no identifier to rename.
Change-Id: I5e5865bc9ff97e6a95ac4f0c48edddcfd0f9ed67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191170
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Over time the existing implementation became buggy. This implementation
logs close to where data is read or written from the stream connected
to the client. As is required, the log records are from the point of view
of the client.
Fixesgolang/go#33755
Change-Id: I91150c697dc2cdb6d3eecbbed7a8d1805a7c476d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191963
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Send the code action kinds that we support, if codeActionLiteralSupport
is specified. Editors may use the CodeActionKinds that we support to
determine UI layout for example.
Change-Id: Iee368aa02c26f4395bb2894593ef38d84d3283b7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191620
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Deep completions can take a long time (500ms+) if there are many
large, deeply nested structs in scope. To make sure we return
completion results in a timely manner we now notice if we have spent
"too long" searching for deep completions and reduce the search scope.
In particular, our overall completion budget is 100ms. This value is
often cited as the longest latency that still feels instantaneous to
most people. As we spend 25%, 50%, and 75% of our budget we limit our
deep completion candidate search depth to 4, 3, and 2,
respectively. If we hit 90% of our budget, we disable deep completions
entirely.
In my testing, limiting the search scope to 4 normally makes even
enormous searches finish in a few milliseconds. Of course, you can
have arbitrarily many objects in scope with arbitrarily many fields,
so to cover our bases we continue to dial down the search depth as
needed.
I replaced the "enabled" field with a "maxDepth" field that disables
deep search when set to 0.
Change-Id: I9b5a07de70709895c065503ae6082d1ea615d1af
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190978
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
this makes sure that any diff implementation obeys the semantics we expect
at higher layers
Change-Id: Iae8842cfb9fece94ea71c04ec146d825eff0cbeb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191017
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we register for and handle didChangeWatchedFiles "change"
events. We don't handle "create" or "delete" yet.
When a file changes on disk, there are two basic cases. If the editor
has the file open, we want to ignore the change since we need to
respect the file contents in the editor. If the file isn't open in the
editor then we need to re-type check (and re-diagnose) any packages it
belongs to.
We will need special handling of go.mod changes, but start with
just *.go files for now.
I'm putting the new behavior behind an initialization flag while it is
under development.
Updates golang/go#31553
Change-Id: I81a767ebe12f5f82657752dcdfb069c5820cbaa0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190857
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change allows renamings of the name of an import spec.
Since there is not always explicit identifier available to select and
rename, allow renaming packages from positions within the import spec.
Change-Id: I0a8aaa92c26e1795ddb9c31a1165b2f2ee89aa34
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191165
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When there is an explicit name for an import spec, treat it as its own
identifier, separate from the import path.
Example:
import h "hello"
The name h is defined in that import spec, not in the package hello
it contains its own references. If asked about a position within the
import path, continue treating that as referencing the imported package.
If the position is within the name, use the identifier there that is
local to that file.
This change allows for go to definition of the explicit name to point to
itself, find all references from the import spec, and rename the
explicit name from the import spec.
Change-Id: Ia1d927a26e73f2dc450d256d71909c006bdf4c37
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191164
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Since renaming an identifier within an import spec is not yet supported,
return an error when this is encountered. These idents from the import
spec have a nil declaration object.
Import paths that contain '.' or '/' are caught by the valid identifier check
avoiding the crash, but import paths such as "fmt" are not as fmt is a
valid identifier. This change checks if i.decl.obj is nil and returns an error
if it is to avoid the crash.
Fixesgolang/go#33768
Change-Id: I4e757b42bedffd648fc821590e4a383826200dc3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191163
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This will allow us to configure the connection at need.
It will also allow us to intercept the content for tests.
Change-Id: Id7d34f2d56f233eae112bea97cccab1f2a88de55
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190798
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Optimize a few things to speed up deep completions:
- item() is slow, so don't call it unless the candidate's name matches
the input.
- We only end up returning the top 3 deep candidates, so skip deep
candidates early if they are not in the top 3 scores we have seen so
far. This greatly reduces calls to item(), but also avoids a
humongous sort in lsp/completion.go.
- Get rid of error return value from found(). Nothing checked for this
error, and we spent a lot of time allocating the only possible error
"this candidate is not accessible", which is not unexpected to begin
with.
- Cache the call to types.NewMethodSet in methodsAndFields(). This is
relatively expensive and can be called many times for the same type
when searching for deep completions.
- Avoid calling deepState.chainString() twice by calling it once and
storing the result on the candidate.
These optimizations sped up my slow completion from 1.5s to
0.5s. There were around 200k deep candidates examined for this one
completion. The remaining time is dominated by the fuzzy
matcher. Obviously 500ms is still unacceptable under any
circumstances, so there will be subsequent improvements to limit the
deep completion search scope to make sure we always return completions
in a reasonable amount of time.
I also made it so there is always a "matcher" set on the
completer. This makes the matching logic a bit simpler.
Change-Id: Id48ef7031ee1d4ea04515c828277384562b988a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190522
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this moves the actual diff algorithm into a different package and then provides hooks so it can be easily replaced with an alternate algorithm.
Change-Id: Ia0359f58878493599ea0e0fda8920f21100e16f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190898
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes to use a mutex and directly execute the less performance
sensitive telemetry calls (tracing and logging) and then uses a submission
queue only for stats adjustments as those are much more sensitive (but it
should also be easier to keep up with them in bursts)
Fixesgolang/go#33692
Change-Id: Ia59a8975f21dfbfcf115be1f1d11b097be8dd9c8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190737
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Test that having a comment at the start of a file allows imports
to be added correctly.
Updates golang/go#33721
Change-Id: Id1673c2509537413710b73261ad2a59afe06b93f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190800
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Insert imports into existing multiline import declarations when
possible.
Logic for choosing where to insert taken from
golang.org/x/tools/go/ast/astutil.
Change-Id: Ie5ad96d5e3d5db2e92a2c05a6104d14a4a192ed3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190598
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is a super minimal change that will simplify the diffs for when I
actually delete the getMapper function.
Change-Id: I16984b344c87b3645fd451668b6ea747c5be12ab
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190557
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first in a series of many changes that will change the API
of the source package to use different types for positions. Using
token.Pos is particularly fragile, since the pos has to refer to the
specific *ast.File from which it was derived.
Change-Id: I70c9b806f7dd45b2e229954ebdcdd86e2cf3bbbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190340
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Rename checks all of the packages that may be affected for conflicts. An
error in any of them leads to renaming error. Returning errors from
multiple packages may be confusing (for example, when there is a test
variant of a package and the same error appears twice). This change
stops after an error is found and returns that error instead of
continuing to search.
Change-Id: Ifba1feddbf8829d3aad30309154d578967e05a36
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190416
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this shuffles things so there a single exporter API rather than an observer
It also removes most of the globals.
per telemetry type.
Change-Id: Iaa82abe2ded1fff9df8e067ed4a55bcbd9d9591f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190405
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change will just make it a bit easier to debug the context
cancellation errors.
Change-Id: I580751ac04e3357031678eb31914828029c96e4b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190412
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This makes the code read slightly better, and more closely
aligns with the open telemetry code.
Change-Id: I87eaf7d08b802f7862f896f2654456ee6a7681e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190404
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This is a straight move of some code with no changes.
It splits the part of the telemetry code that will become a standalone library from the bit that belongs in the lsp.
Change-Id: Icedb6bf1f3711da9251450531729984df6df7787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We need to limit the concurrent file reads to prevent `too many open
file` errors. The first attempt to solve this was done in change 189437,
but this change turned out to be incorrect.
So this change reverts the changes made in change 189437 and instead
adds an new semaphore around the `nativeFileHandle.Read` method.
The limit is currently set to half of the lowest open file system limit
of *nix, Windows and MacOS system (their respective limits are 1024, 16384,
and 256).
Change-Id: I27d741e3a3c36eb11bfa7457575f5d5831c06ad7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190417
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fix adds all packages to the renamer packages map.
Renaming performs checks on each package to make sure there are no
conflicts. If there are multiple packages, each package needs to be
checked. The packages were being incorrectly added to the map and were
all being put under a single key.
Fixesgolang/go#33664
Change-Id: I68466ce34ac49b700ce6d14ce0b53e2795926fa9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change fixes a race condition in the metadata caching logic.
Also, some minor fixes to comments and invalidation logic (it's not
necessary to invalidate ASTs when a package is invalidated).
Change-Id: I927bf6fbc661a86ef0ba99b29a9ed979cd1eb95d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190317
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Make use of the existing fuzzy matcher to perform server side fuzzy
completion matching. Previously the server did exact prefix matching
for completion candidates and left fancy filtering to the
client. Having the server do fuzzy matching has two main benefits:
- Deep completions now update as you type. The completion candidates
returned to the client are marked "incomplete", causing the client
to refresh the candidates after every keystroke. This lets the
server pick the most relevant set of deep completion candidates.
- All editors get fuzzy matching for free. VSCode has fuzzy matching
out of the box, but some editors either don't provide it, or it can
be difficult to set up.
I modified the fuzzy matcher to allow matches where the input doesn't
match the final segment of the candidate. For example, previously "ab"
would not match "abc.def" because the "b" in "ab" did not match the
final segment "def". I can see how this is useful when the text
matching happens in a vacuum and candidate's final segment is the most
specific part. But, in our case, we have various other methods to
order candidates, so we don't want to exclude them just because the
final segment doesn't match. For example, if we know our candidate
needs to be type "context.Context" and "foo.ctx" is of the right type,
we want to suggest "foo.ctx" as soon as the user starts inputting
"foo", even though "foo" doesn't match "ctx" at all.
Note that fuzzy matching is behind the "useDeepCompletions" config
flag for the time being.
Change-Id: Ic7674f0cf885af770c30daef472f2e3c5ac4db78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change eliminates the need for the package cache map, and instead
stores package type information in the store. We still have to maintain
invalidation logic because the key is not computed correctly.
Change-Id: I1c2a7502b99491ef0ff68d68c9f439503d531ff1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When it is certain we are completing a struct field name, we don't
want deep completions. The only possible completions are the remaining
field names.
I also silenced the log spam in tests by disabling the go/packages
logger and the lsp logger.
Fixesgolang/go#33614
Change-Id: Icec8d92112b1674fa7a6a21145ab710d054919b4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190097
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change configures the ordering of documentation on hover. If the
user has requested full documentation, the signature appears at the top,
to avoid the user having to scroll. Otherwise, the signature appears at
the bottom, to minimize the distance between the triggering identifier
and the signature.
Updates golang/go#33352
Change-Id: I017baaabd0ee0c31cb13cb6abdda296782929823
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189943
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change fixes documentation for completion items by using cached
package and AST information to derive the documentation. We also add
testing for documentation in completion items.
Change-Id: I911fb80f5cef88640fc06a9fe474e5da403657e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189237
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We're still leaving open the possibility of changing this API,
but things have baked for a bit so I feel comfortable removing the
build tag.
Also add some documentation.
Change-Id: I3beb666b58177553fc406dc9670d569d5928fedd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189460
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
On MacOS the default open file limit is 256 files per process. For big
projects this could cause issues when reading all files (more or less)
at the same time.
By moving up the `parseLimit` so the reading of the file is only done
when it is allowed to start parsing the file, we stay well below the 256
files per process (as the `parseLimit` is currently set to 20).
Since `parseLimit` is actually only used to limit IO access, let's also
rename the const to `parseLimit`.
Change-Id: Ie8744030875d84d0d6095ee4ec2d9d553911bed1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189437
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
The `files` slice is used twice. First it's used to get all results from `ph.Parse`, and then it's reused to filter all `nil` values (which may have been returned by the `ph.Parse` method).
After the loop to "filter" out all the `nil` values, we also need to strip the remaining values.
I also changed the ordering so that we first check the errors and
only then perform this loop. That way the code will return earlier
when the context was canceled.
Partially fixes#33531 by prevention the panic reported in that issue.
Change-Id: I09478e765adcd0384ec4745921eb5c5aea405ef2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189397
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is probably a better approach than showing an extra diagnostic,
since a user cannot dismiss a diagnostic.
Fixesgolang/go#33397
Change-Id: I92b9a00f51a463673993793abfd4cfb99ce69a91
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188766
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
It should work now that go packages accepts go1.13's new go list
behavior.
Updates golang/go#33157
Change-Id: I1780210b414bc0556e10e10c8c775fbfd2922b2e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189038
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This relates to https://github.com/golang/go/issues/31374 and should switch all instances within `gopls` to use `x/errors` instead of `fmt` to create new errors.
Change-Id: I18339b75d12418d852e0dcc2ba0ed6c2970783b3
GitHub-Last-Rev: f4a55d9b79e7458ef1f1e06cb5eabbabd884f321
GitHub-Pull-Request: golang/tools#108
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change keys the supported code actions map by file kind, so that we
can extend it more easily for go.mod files.
Change-Id: Ic28f91bd517700cf070281b1c4d4ded14a702790
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189039
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
* Adds tests for 'convertAnnotation'.
* Ensures that converting an empty string "" to
a truncatable string returns nil, to save bandwidth. However,
in the future, we should perhaps allow empty strings to
be serialized if say "emptyAllowed" is set.
* Caught the case where convertAttribute hadn't type
switched on "int"
* Provides 40.5% test coverage for ocagent.go
More tests for the other functions shall follow in later CLs.
Updates CL 186679
Change-Id: Ie9b46b0b320339ed79cd136fff536ccfcfbeb9e7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188877
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The bug manifests itself when a non-existent file is passed in as an
argument to gopls, causing a nil pointer dereference panic. This is due
to an attempt to reference the "mapper" attribute, which is not set if
the file is not found.
The resolution is to check for an informative error that is set on the
file instance after "getFile" is called and return it immediately to the
caller to allow the error to propagate up to the main() function and
print the error to stdout.
Testing:
--------
Non-existent file:
$ gopls -rpc.trace -v check gopls/doesnotexist.go
check: file:///Users/albertteoh/repo/tools/gopls/doesnotexist.go: open /Users/albertteoh/repo/tools/gopls/doesnotexist.go: no such file or directory
Existing go file:
$ gopls -rpc.trace -v check internal/lsp/definition.go
2019/08/03 13:33:00 Info:go/packages.Load
packages = 2
2019/08/03 13:33:00 Info:go/packages.Load
package = golang.org/x/tools/internal/lsp
...
Fixesgolang/go#33445
Change-Id: Ib56d8a4b7f23f4882b75cf684c5d18a49d27b824
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188857
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Get quick fixes for the diagnostics related to import errors. These
fixes add, remove, or rename exactly one import.
This change exposes the individual fixes found by the imports package,
and then applies each of them separately to the source. Since applying each
fix requires a new ast anyway, we pass in the source to be parsed each time.
Change-Id: Ibcbfa703d21b6983d774d2010716da8c25525d4f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188059
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The "Create" and "Delete" WatchKind values were missing from the
generated code because their names were colliding with other
constants. Add "WatchKind" to go.ts prefix map to disambiguate.
Updates golang/go#31553
Change-Id: I60269969831c0822896e87b3f2332ded71748f42
GitHub-Last-Rev: 6d85cf9b3865ba5af0b5ec7f90358e5734ed9451
GitHub-Pull-Request: golang/tools#136
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Set the server state to initialized so that dynamic configuration
requests will be sent to the client.
Rename the mutex that guards state. The state field was previously named
initialized, so it only makes sense to similarly rename the mutex that
guards the state field.
Always unlock stateMu before calling other functions so that callees
that need to check state can acquire the lock.
Change-Id: Ia5592ca1dedfc6f004ae6b61548890624ae98d59
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
String matching is used to find diagnostics that could be fixed by
organizing imports. Unused imports are of the form:
"X imported but not used"
"X imported but not used as Y"
Check that "imported but not used" is contained in the message to
include both named and unnamed imports.
Change-Id: I478d1fb239962e706eb1adf305b858fcc875b7f0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188158
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the message is empty and there is and there is an error,
the description of the annotation should be the error message.
More info can be found here:
https://go-review.googlesource.com/c/tools/+/186679
Change-Id: Ica0a9cc132de912b2e14ab527baf4304f8b5d8ba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188118
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
switch the ioLimit channel from a bool to a struct{} as the values
stuffed into the channel have no meaning.
A mix of consistency and comment cleanups in *importer.parseFiles.
sameFile is reported as unused, so removed, removing some now unused
imports.
The assignment to lit in *view.parseDeferOrGoStmt's for{} loop was
reported as ineffective.
Update the comment of fix a little for clarity.
Change-Id: I50f0442bfd7e4d0cc0e6fdadbf1f6272366a716c
Change-Id: I50f0442bfd7e4d0cc0e6fdadbf1f6272366a716c
GitHub-Last-Rev: 74d8a8bdb768a827db3c1fd1723a528818e222ee
GitHub-Pull-Request: golang/tools#109
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179957
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The results of running 'go list -m' are only valid as long as the
current module and the modules in its replace directives do not
change their go.mod files. Store the 'go.mod' versions that are
used in the imports call, and reinitialize the module resolver if
they change.
Change-Id: Idb73c92b9e4dc243a276885e5333fafd2315134d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186597
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Packages with errors may still contain files that can be formatted.
Try to format the source of the files in packages that have errors.
This change will still not format files with parse errors.
Updates golang/go#31291
Change-Id: Ia5168d7908948d201eac7f2ee28534022a2d4eb0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/187757
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We should not be sending messages from within the telemetry worker. This does it in a new go routine now.
Change-Id: I55e3b6df04699b8e45bc37b99997463f45ee114e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186958
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Metrics will be added once the agent supports the json form.
Change-Id: I40f6790970311b020a7cab72474b71f4e2aa32e9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186679
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
These are hand written structs that when passed through the standard json
encoder produce output that mathches the json form of the open census protobuf
messages.
This allows us to talk to the agent without any extra dependancies.
Change-Id: I23d617018009520aad3832e0425ed0a53c51fd1f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186678
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Save the packages found when scanning of the module cache.
The computed package may have a different import path due
to replace directives, so this needs to be updated
when the moduleResolver is initialized again.
Change-Id: Ib575fcc59b814ff263b431362df3698839a282f6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186301
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://golang.org/issue/33157 explains the issues with overlays. The
gopls tests caught this bug, but the go/packages tests didn't, so modify
the go/packages tests correspondingly.
Change-Id: I8ea8e06e145aa2420655cbe4884e60f36acfad7b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also add enough support that using it from within the context of the lsp will
report back to the original client.
Change-Id: I081f157c289642454e9f0476747b2131dcd4e16c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185996
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A detatched context ends up attributing all background work to the initialize
function.
Change-Id: I81206462752228d5ac81408fb1e3fb86ab36796e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186457
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I dropped the line that added the stats to the context when merging the recent changes.
Change-Id: I66ab2958b0737360896b40bf30c5ca3c2cebbae5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186300
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a Logf field to the packages.Config.
Change-Id: I144a9a1e1181585bbe621898c4a3e6a007a38322
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185993
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The imports ProcessEnv contains cached module and filesystem state. This change
allows gopls to use the same ProcessEnv and resolver across multiple calls to the
internal/imports library.
A ProcessEnv belongs to a view, because the cached module state depends
on the module that is open in the workspace.
Since we do not yet track whether the 'go.mod' file has changed, we
conservatively reset the cached state in the module resolver before
every call to imports.Process.
Change-Id: I27c8e212cb0b477ff425d5ed98a544b27b7d92ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184921
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change removes the need for the ast and token fields on the *goFile
object. We switch to using source.ParseGoHandles on the package, which
means that we can easily access both the AST and token via the package,
which is already cached.
Change-Id: I5f78bbe09362f4d95eb15556617bdbd809a7a55d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185878
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We only had the tracing on didChange before this
Change-Id: Iadec8a43d439931bf58925f149a1d32b3ae29c36
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186199
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Noticed this because I was accidentally running these tests with Go
1.11.
Change-Id: Ic35d71bd1da9078b4bde6aa2ed62d54a8b95b0e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186298
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Suzy Mueller <suzmue@golang.org>
There is a problem with this test failing in module mode only with the
tip of the go tree. Adding this file changes it from a pure overlay package
to one that has an extra file, which fixes it for now.
updates golang/go#33125
Change-Id: I87dae0b44691246a1f79df454afb190f944cc886
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186259
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We recommend that gopls integrators apply the []TextEdit responses in
reverse order to get a correct resulting document. This strategy works
when the response is already sorted. Have gopls return sorted []TextEdit
for each file.
Fixesgolang/go#33123
Change-Id: Ib570881c9623695d2ae3194fa8a97b0a681a3250
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186258
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
And purge the loggers from the view and session.
Change-Id: I262958f340e9a5ac9cc9b3db9e9910381e457478
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185989
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We merge them into a single interface and support multiple of them rather than
just one.
This will allow us to stack handlers with different responsabilities and extract
some core logic (like tracing) out to a handler where it belongs.
Change-Id: I6aab92138550c5062fcb1bed86171e0850d1eb38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185879
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In internal/lsp/link.go appeared a bug that error message is printed
even if error is not apeared. this commit is fixing this behaviour.
Fixesgolang/go#33087
Change-Id: I932546867d78c5c0c3d2c9dabd13287f6837f458
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186037
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change merely modifies session.DidOpen to accept the document's
language ID. It does not actually add any handling of the language ID.
Change-Id: I2582ae307d1ca062f37b4683907cdbcfdfc61809
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184160
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If typeCheck() returned an error, we could get into a state where a
package had an entry in the pcache, but the package's files had an
empty "pkgs" map. When we got a DidChange event for one of the files,
no packages would get invalidated since the file's "pkgs" was
empty. This resulted in the cached typeCheck() error persisting
indefinitely. Fix by never caching pcache entries on error.
An easy way to reproduce the problem was to delete the package name
from a file. For example, edit "package foo" to be just
"package". This caused the package to get stuck with an "AST for %s
has an invalid position" error.
Change-Id: I330bf9e419852dffa0f2dee94b56226367488dd1
GitHub-Last-Rev: 18be7078521b942694c76f799a2d520eee47167d
GitHub-Pull-Request: golang/tools#135
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185839
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
also change the return type to be and end function and not an incomplete span
Change-Id: Icd99d93ac98a0f8088f33e905cf1ee3fe410c024
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185349
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This provides the basic support for aggregating stats into useful metrics,
utilizing tags.
This change also adds the standard rpc metrics for the stats the jsonrpc2 system
is already filling in.
Change-Id: Ibe1b64c4c4c587dacd53112454606634e9f682ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185342
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Since 'IdentifierInfo' doesn't contain ast node of import spec,
gopls will construct an empty string under plaintext mode and
'```go\n\n```' under markdown mode for *ast.ImportSpec. For now,
the hovering result of import spec is the corresponding node
format.
Fixesgolang/go#33000
Change-Id: I4c25782ddb5bcc557ace82f46d480316b0b90509
GitHub-Last-Rev: 150728f401c5f9b161b557584ad3250f46e50869
GitHub-Pull-Request: golang/tools#134
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185357
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For all uses inside the lsp we use the detatch logic instead
For tests we build it in the test harness instead
This is in preparation for things on the context becomming important
Change-Id: I7e6910e0d3581b82abbeeb09f9c22a99efb73142
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185677
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Support renaming of identifiers in test packages. The packages for
all of the references must be checked and the changes need to be
deduped, since both a package and its test package contain some of the
same files.
Fixesgolang/go#32974
Change-Id: Ie51e19716faae77ce7e5254eeb3956faa42c2a09
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185277
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the basic library that allows for recording of stats about the program
operation.
Change-Id: I09f7e3de5fc37aaf29bc0db46f15b15056fc0eb2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185338
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This maps more directly to the basic telementery tagging requirements and uses
the context package in a way that is more idomatic.
Change-Id: If08c429b897bddfe014224ac2d92d7796a521ab9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184941
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is used by all the telemetry packages that come next
Change-Id: Ic84d91da2a792b53ee8839aae207ae5767ab17e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184940
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds documentation to the completion items. This normally
should be done in completionItem/resolve, since it takes more time to
compute documentation. However, I am not sure if that latency incurred
by pre-computing documentation is actually significantly more than the
latency incurred by an extra call to 'completionItem/resolve'. This
needs to be investigated, so we begin by just precomputing all of the
documentation for each item.
Updates golang/go#29151
Change-Id: I148664d271cf3f1d089c1a871901e3ee404ffbe8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184721
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Objects for builtin types all have position token.NoPos. We do
not want all objects that have position token.NoPos to be matched
when we are looking for references for this object, so we need to
compare the names of the objects as well.
Fixesgolang/go#32991
Change-Id: I67e7aba9909ebcbb246203ea5c572debf996c792
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185247
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We err on the side of refreshing package metadata if something goes
wrong getting a file's AST, but we don't want to refresh in the case
of context cancellation. Now we check for that error explicitly.
In particular, I noticed that completions would stop working when
typing quickly. Refreshing the metadata triggers "go list" calls which
can take a long time in certain cases.
Change-Id: I1b0c580e5541b1536a69ccaef241d7e8c5720d60
GitHub-Last-Rev: 6a82bfb586f93ef5e8e5996b11e06ffc7808f529
GitHub-Pull-Request: golang/tools#130
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184977
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The satisfy package has a precondition for Finder.Find that requires
that the package has no type errors. If this is a check that we would
perform, give an error and do not rename.
Fixesgolang/go#32882
Change-Id: Id44b451bf86ff883fd78a6306f2b2565ad3bdeb9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184857
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Failed to properly check the try-bot result in CL 185058. Hence didn't
spot the LSP tests that also verify offset behaviour. This CL fixes
those tests to align the LSP tests with the change introduced in CL
185058.
Change-Id: Ia81ab6db7a2c3a4729d8ef73205b6071af270b00
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185220
Run-TryBot: Paul Jolly <paul@myitcv.org.uk>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This adds the ability to tie a background context to the context that created it
in traces, and also cleans up and annotates the context used in type checking.
This gives us detailed connected traces of all the type checking and parsing
logic.
Change-Id: I32721220a50ecb9b4404a4e9354343389d7a5219
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183757
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This uses the new opencensus compatability layer to add telementry to some of
the functions in the lsp, in order to allow us to understand their costs and
call patterns.
Change-Id: I7df820cd4eace7a4840ac6397d5df402369bf0a7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183419
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A client can specify "IncludeDeclaration" in its ReferenceParams.
When they do so, we want to include the declaration, even if it was not
in the scope we searched for references.
Additionally, we also return the location of the declaration first in
the result array when it is included in the results.
Updates golang/go#32572
Change-Id: I12837cd98102ee8d531f0f4bac2fb7bded2564c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184723
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
time.Tick produces multiple ticks (and leaks a Ticker); time.After
produces a single tick, which is what is called for here.
Change-Id: I922b11e1263a8367afec76c10831b7284f3559ec
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184938
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The first deadlock involved differing mutex acquisition order in two
code paths:
1. loadParseTypecheck() holds the "mcache" mutex then eventually
acquires the "handleMu" file mutex.
2. (*goFile).invalidateContent() acquires the "handleMu" mutex first and
then the "mcache" mutex.
Fix by changing the acquisition order in invalidateContent().
The second deadlock involved the file watcher. The two code paths
involved were:
1. (*goFile).GetPackages() holds the view mutex and eventually calls
(*WatchMap).Watch, which acquires the watcher mutex.
2. (*session).openOverlay acquires the watcher mutex as it triggers a
file's callbacks, and then the callback
"(*goFile).invalidateContent" acquires the view mutex.
Fix by not holding the watcher mutex as we invoke the callbacks.
Fixesgolang/go#32910
Change-Id: I9d060e0d80fd86a317a1d6c7aaa736a8ce10bd07
GitHub-Last-Rev: 04944fa0249c0e6f1022a415787e23abce21bc2e
GitHub-Pull-Request: golang/tools#129
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184880
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of defaulting to a one sentence synopsis for documentation on
hover, allow the user to configure the amount of documentation they want
to see. Right now, the options are none, some (using go/doc.Synopsis),
or all. We should add a 4th, single-line, mode, which will allow clients
like vim-go to stop stripping off documentation on hover.
Updates golang/go#32561
Change-Id: I529242da84b794636984d5ef2918b7252886f0ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184797
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Add some extra smarts when evaluating untyped constants as completion
candidates. Previously we called types.Default() on the expected type
and candidate type, but this loses the untypedness of an untyped
constant which prevents it from being assignable to any type or named
type other than the untyped constant's default type.
Note that the added logic does not take into account the untyped
constant's value, so you will still get some false positive
completions (e.g. suggesting an untyped negative integer constant when
only a uint would do). Unfortunately go/types doesn't provide a way of
answering the question "is this *types.Const assignable to this
types.Type" since types.AssignableTo only considers a constant's type,
not its value.
Change-Id: If7075642e928f712b127256ae7706a5190e2f42c
GitHub-Last-Rev: 124d2f05b0aec09c9d7004d9da0d900524185b92
GitHub-Pull-Request: golang/tools#128
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184477
Reviewed-by: Suzy Mueller <suzmue@golang.org>
Often anonymous functions can be passed as arguments to a function. In
these cases, it can be annoying for a user to see signature help for the
entire duration of their writing this function. This change detects if
the user is typing in a function literal and disables signature help in
that case.
Fixesgolang/go#31633
Change-Id: I7166910739b6e1ec0da2ec852336136b81d13be0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184260
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Suzy Mueller <suzmue@golang.org>
Support the renaming of the imported name of a package within a file.
This case needs to be special cased because the ident may be added or
removed.
Change-Id: I333bc2b2ca5ce81c4a2afb8b10035f525dfad464
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184199
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change modifies gopls to use the internal goimports library, which
allows us to manually configure the ProcessEnv. We also add a logger to
the ProcessEnv to allow this change not to conflict with gopls's logging
mechanism.
Fixesgolang/go#32585
Change-Id: Ic9aae69c7cfbc9b1f2e66aa8d812175dbc0065ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184198
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As per discussion on golang/go#32810, to avoid the `go list` storm caused by many
files being opened, we check if the file content opened is equivalent to
the content on disk. If so, we mark this file as "on disk" so that we
don't send it as an overlay to go/packages.
Updates golang/go#32810
Change-Id: I0a520cf91bbe933c9afb76d0842f5556ac4e5b28
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184257
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Find references to identifiers in both a package and its test package.
Change-Id: I9d9da4aa37c36c448336aed044df79cfd1c903f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183990
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change refactors code actions to handle the Context.Only parameter,
which indicates which code actions a language server should execute.
Change-Id: Iddfccbbeba3a53fde2aa8df844434f2ab9d01666
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184158
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
There was a situation where we were trying to re-acquire a lock that was
already held. This change solves this issue.
Change-Id: I97cf6bad7e7c219a267e3ca5d174a2573f70ebe2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The identifier in a reference is used to check for a doc comment.
Implicits do not have an ident, so do not use that to look for a doc
comment.
Also set the context.Context for the renamer.
Change-Id: I085d9e6c11d919222592dcb6fb30982eeb0fc7cd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184042
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Adjust the output of requests.ts to use the new facilities of jsonrpc2.go.
Change-Id: I316f7846db9f683345b836915d992e751f126196
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184081
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Deep completion refers to searching through an object's fields and
methods for more completion candidates. For example:
func wantsInt(int) { }
var s struct { i int }
wantsInt(<>)
Will now give a candidate for "s.i" since its type matches the
expected type.
We limit to three deep completion results. In some cases there are
many useless deep completion matches. Showing too many options defeats
the purpose of "smart" completions. We also lower a completion item's
score according to its depth so that we favor shallower options. For
now we do not continue searching past function calls to limit our
search scope. In other words, we are not able to suggest results with
any chained fields/methods after the first method call.
Deep completions are behind the "useDeepCompletions" LSP config flag
for now.
Change-Id: I1b888c82e5c4b882f9718177ce07811e2bccbf22
GitHub-Last-Rev: 26522363730036e0b382a7bcd10aa1ed825f6866
GitHub-Pull-Request: golang/tools#100
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177622
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As per the following guidance: "Try to keep the normal code path at a minimal indentation"
I know this is normally applied to error handling, but the same logic about improving readability applies here too.
Change-Id: Ib20dae9975e94b40fb6ff7049782375b18ef59ba
Change-Id: Ib20dae9975e94b40fb6ff7049782375b18ef59ba
GitHub-Last-Rev: 97919272de76ec15845556e032985c5969a277fa
GitHub-Pull-Request: golang/tools#125
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183698
Reviewed-by: Suzy Mueller <suzmue@golang.org>
Run-TryBot: Suzy Mueller <suzmue@golang.org>
This change moves from marking a package with `go list` errors as
missing, to marking a package with no files as missing.
Change-Id: Ibad1e67518d8a7f4c4bde416c53ab8132ae534e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184039
Reviewed-by: Ian Cottrell <iancottrell@google.com>
There has been a race condition that occasionally appears in test runs
on TryBots. Multiple threads perform type-checking, so they may race on
setting the fields of the *goFiles. Add a mutex to synchronize this.
Change-Id: If52c9d792c6504fc89044964998b06de7dfbd19c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183978
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This separates hides the wire structures, and then exposes a new Request
type to allow for it to carry advanced features.
It also embeds the connection into the request and changes the signature of the
handler to no longer require a separate Conn argument.
Change-Id: I20b54f146285f7a9cb5f279c6ebdf0f286f4b829
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183717
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
typeCheck() was swallowing context.Canceled errors and leaving the
cached package in a bad state. In particular, after two rapid changes
to imports I was left in the "no package for file" error mode until I
change my imports again. The second change canceled the first change
which ended up sticking a skeleton *pkg in the package cache instead
of propagating the canceled error.
Change-Id: I15b072188c3359d9cd1812bd49e72548ba214250
GitHub-Last-Rev: 240f61718fbb5bfc787bbfaaaae1d38925d7c405
GitHub-Pull-Request: golang/tools#126
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183940
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In type assertion expressions and type switch clauses we now infer the
type from which candidates must be assertable. For example in:
var foo io.Writer
bar := foo.(<>)
When suggesting concrete types we will prefer types that actually
implement io.Writer.
I also added support for the "*" type name modifier. Using the above
example:
bar := foo.(*<>)
we will prefer type T such that *T implements io.Writer.
Change-Id: Ib483bf5e7b339338adc1bfb17b34bc4050d05ad1
GitHub-Last-Rev: 965b028cc00b036019bfdc97561d9e09b7b912ec
GitHub-Pull-Request: golang/tools#123
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change also leaves in an opt-out setting (noIncrementalSync), just
in case we need to disable it at some point.
Change-Id: I3575efe942294b764c35d9259ce75d124b590e98
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182468
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This package is basically a library (even though it's internal) and
it's generally considered a bad practice for libraries to panic, so
don't.
Change-Id: I37d9d73ae48ececc6b31436f1076e1f85213f129
Change-Id: I37d9d73ae48ececc6b31436f1076e1f85213f129
GitHub-Last-Rev: 453b538e53e48889171d31829af3304409f9a8bc
GitHub-Pull-Request: golang/tools#124
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183680
Reviewed-by: Suzy Mueller <suzmue@golang.org>
This change adds supports for a package belonging to multiple files.
It requires additional packages.Loads for all of the packages to which a
file belongs (for example, if a non-test file also belongs to a package's
test variant).
For now, we re-run go/packages.Load for each file we open, regardless of
whether or not we already know about it.
This solves the issue of packages randomly belonging to a test or not.
Follow-up work needs to be done to support multiple packages in
references, rename, and diagnostics.
Fixesgolang/go#32791Fixesgolang/go#30100
Change-Id: I0a5870a05825fc16cc46d405ef50c775094b0fbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183628
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change just separates minor changes made along the course of the
memoization CL out into their own change. This will clean up the diffs
in the memoization CL.
Change-Id: I7d59e05ba6472af5f1bf516b1e5b879a5815b9a5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183250
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is designed to provide a compatible API to opencensus libraries while we
still cannot directly depend on it.
Most of this will be deleted again when we move the code over into the
sub-module.
Change-Id: I42b561f4f403c18cd22fb909b037f584ea90ad1b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183247
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Replace doc comment text for the declaration of an identifier with the
new name.
This implementation is taken from golang.org/x/tools/refactor/rename.
Change-Id: Id1b80fad456646a46c8ae2caa4e8febf05aaf798
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183261
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before renaming a variable, check the package to make sure that this
renaming would not result in a conflict that could break the program.
All of the implementation is taken from "refactor/rename" with the
dependency on "go/loader" removed.
Change-Id: Ib0782ec8f247a6df1750f2c8213f69186699ce1a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183257
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change sends the expected boolean value for 'renameProvider'
to the client.
When a client does not send 'prepareSupport' in its initial
'initialize' request, the client expects to get a boolean value for
'renameProvider'. Since we do not yet provide prepare support, we just
set 'renameProvider' to true regardless of the value of prepareSupport.
Fixesgolang/go#32703
Change-Id: I1103e51e1a2927b98aaedf2839996e9cd7f7cbcc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/183259
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Previously we would always expand *types.Func completion candidates to
function calls, even if the expected type matched the function itself,
not its return value. Now we check the function itself before we check
its return value. This fixes cases like this:
func foo() int { return 0 }
var f func() int
f = <foo> // now completes to "foo" instead of "foo()"
Also, *types.Var function values were never getting expanded to calls.
I fixed the completion formatting to know that both *types.Func
and *types.Var objects might need to be invoked in the completion
item. This fixes cases like this:
foo := func() int { return 0 }
var i int
i = <foo()> // now completes to "foo()" instead of "foo"
Change-Id: I8d0e9e2774f92866a3dd881092c13019fb3f3fd5
GitHub-Last-Rev: 7442bc84b5bbb86296289bbc745ec56a5f89d901
GitHub-Pull-Request: golang/tools#122
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182879
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change provides support to rename identifiers within a single
package.
The renaming is performed by finding all references to an identifier,
and then creating text edits to replace the existing text with the
new identifier.
Editing an import spec is not supported.
Fixes#27571
Change-Id: I0881b65a1b3c72d7c53d7d6ab1ea386160dc00fb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182585
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In situations like:
var buf bytes.Buffer
var w io.Writer = &b<>
if we want to complete to "buf" properly we need to apply the "&" type
modifier to buf's type of bytes.Buffer to see that it is assignable
to type io.Writer. Previously we applied type modifiers in reverse to
the "expected" type (io.Writer in this case), but that is obviously
incorrect in this situation since it is nonsensical to
dereference (the reverse of "&") io.Writer.
Change-Id: Ib7ab5761f625217e023286384c23b8c60e677aac
GitHub-Last-Rev: 4be528f2572c9c987334552e3f8a31d4eddce81a
GitHub-Pull-Request: golang/tools#121
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182598
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Implicit local variables for type switches do not appear in the Uses
map and do not have objects associated with them. This change
associates all of the different types objects for the same local type
switch declaration with one another in the declaration.
The identifier for the implicit local variable does not have a type but
does have declaration objects.
Find references for type switch vars will return references to all the
identifiers in all of the case clauses and the declaration.
Fixesgolang/go#32584
Change-Id: I5563a2a48d31ca615c1e4e73b46eabca0f5dd72a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182462
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
So we can surface their code actions later.
Change-Id: I735e5d025a1250861d49db227f5a79453f599140
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182837
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The previous change to handle didSave never actually was turned on
because you need to specify it in the server capabilities.
Change-Id: I5ce40b4270eda125e0af6accf144d2a96070238c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Previously, if any one file in a package had a parse error, we would not
send type errors for any of the other files. Now we make this decision
per-file, so that, even if a file has parse errors, type errors in the
other files will be shown.
Fixesgolang/go#32596
Change-Id: I086c04f0ec37cd1b33845153328faf368232d834
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182466
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When checking if a completion candidate matches the expected type at
the cursor position, we now use types.AssignableTo instead of
types.Identical. This properly handles cases like using a concrete
type to satisfy an interface type.
Calling AssignableTo triggered some crashes related to the fake
"resolved" types we create. Their underlying type was nil, which is
not allowed. We now set their underlying type to the invalid type.
I've also rearranged things so expected type information lives in a
dedicated typeInference struct. For now there is no new information added,
but in subsequent commits there will be more metadata about the
expected type.
Change-Id: I14e537c548960c30e444cf512a4413d75bb3ee45
GitHub-Last-Rev: 7e64ebe32938562648938d7a480195d954b018f2
GitHub-Pull-Request: golang/tools#116
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182358
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The `if err :=` block creates a shadow err value that is then discarded
after the block.
Change-Id: I78f6a7298ac5d3d86ece056a9e328bcee9fdc683
Change-Id: I78f6a7298ac5d3d86ece056a9e328bcee9fdc683
GitHub-Last-Rev: 4bac8fb982fa3a0724206422b1a4dbc5e41c34a9
GitHub-Pull-Request: golang/tools#114
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
These redundant operations can cause more memory and cpu consumption.
Change-Id: I54e0e23a8d1079c7991f55c897c441566c5fb2d8
GitHub-Last-Rev: 13162aa1e88ff272738c6a6675010edd2140c8a4
GitHub-Pull-Request: golang/tools#120
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182478
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change clears diagnostics for a package when all files from that
package have been closed in the editor. This prevents the user from
seeing irrelevant diagnostics.
Change-Id: I63d337805835dc45086cfba684d810f86ade5655
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182463
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Without this accessing gof.ast.file.Pos() will panic if gof.ast.file is nil
Change-Id: I829f3667d201f026fcf0475f4fdabce0aced58f8
Change-Id: I829f3667d201f026fcf0475f4fdabce0aced58f8
GitHub-Last-Rev: 777c015d691bf0d14cab5bb0bca6749cc9bdf605
GitHub-Pull-Request: golang/tools#119
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182420
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes the packageErrorSpan function into the listErrorSpan.
Previously, this was causing the gopls-generated errors to get parsed,
which would result in attempts to send diagnostics for invalid filenames.
Fixesgolang/go#32603
Change-Id: I7a54ed8884b78beb3f894598f18a24ed232f7412
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182460
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change does not actually use the token handle for GetToken right
now, but implements the approach for memoizing *token.Files.
Change-Id: I75919f4e97abd6893b202c021adecd2c9dbfc2be
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182277
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change ensures that we always populate a new set of missing imports
when we re-load a package. Otherwise, we might keep stale missing
imports around.
Change-Id: Id9b6b8201e3ed093a7b9ece97a81e298de612a5e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182459
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This adds support for the AllObjectFacts and AllPackageFacts features that were
added to the analysis library.
It also moves the list of analyzers to an exported global so it can be added to
easily.
Change-Id: Ibbe81b17b190d04a0e49510c23558430bc03ca70
Reviewed-on: https://go-review.googlesource.com/c/tools/+/182177
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This is the typescript code that generates the current versions of
tsprotocol.go, tsserver.go, and tsclient.go.
Change-Id: If40cd7a46e5e7d646d99670da5e04831b6ddc222
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180477
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This adds an IDs map to the metadata cache, which maps package paths to
IDs. This is only ever used by the Import function in the type checker.
Change-Id: I8677d9439895bc6cbca5072e3fa9fddad4e165d5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181683
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Previously when you added a new file to an existing package, the new
file would get stuck with the "no package for file" error until you
saved the file and then made changed a different file in the
package. There were two changes required to fix the errors:
First, we need to invalidate the package cache when a new file is
added to a package so that the package will actually re-parse and
re-type check. We now notice if file names changed when updating a
package's metadata and invalidate the package cache accordingly.
Second, when dealing with overlay (unsaved) files, we need to map
the *goFile to the package even if we fail to parse the
file (e.g. the new file fails to parse when it is empty). If we don't
map it to the package, the package won't get refreshed as the file is
changed.
Fixesgolang/go#32341
Change-Id: I1a728fbedc79da7d5fe69554a5893efcd1e1d902
GitHub-Last-Rev: e7c3d4c1f8f73b12c87ee76d868cc04893e55808
GitHub-Pull-Request: golang/tools#111
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change replaces the strings that were previously used for both the
ID and package path fields. This is a precursor to the change that will
replace the uses of package path with package ID.
Change-Id: I353e98aedede9b85c7a183fdd49048ff43b1e26d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181757
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Previously these were only applied from inside parseFiles, which also made it
harder to refactor the remaining parse logic.
This theoretically means fixup is now called in more places than it was before,
but should cause no change in behaviour.
Change-Id: Ic6d006c1d36daca7514626653aaedf90d76e1d0f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181544
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the context is canceled (or times out) during parsing, we were
previously caching the package with no *ast.Files. Any further LSP
queries against that package would fail because the package is already
loaded, but none of the files are mapped to the package. Fix by
propagating non-parse errors as "fatal" errors in
parseFiles. typeCheck will propagate these errors and not cache the
package.
I also fixed the package cache to not cache errors loading
packages. If you get an error like "context canceled" then none of the
package's files are mapped to the package. This prevents the package
from ever getting unmapped when its files are updated. I also added a
retry mechanism where if the current request is not canceled but the
package failed to load due to a previous request being canceled, this
request can try loading the package again.
Updates golang/go#32354, golang/go#32360
Change-Id: I466ddb8d336aeecf6e50f9f6d040787a86a60ca0
GitHub-Last-Rev: 5f1e7ef9c883b76a9c1b3636936d91ec0821d922
GitHub-Pull-Request: golang/tools#110
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181317
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change will allow users in $GOPATH mode to have some
semblance of a gopls version.
Change-Id: I1b490d18fdf7550c54d56653ae500dc4dc25ee3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181238
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We weren't comparing the right values when checking to see if a file's
import statements had changed. This was causing us to not refetch a
package's metadata when needed in certain cases. In particular, if you
typed out an import path by hand you would get stuck with "no metadata
for package" until you added or deleted another import line to trigger
metadata refresh.
Updates golang/go#32516, golang/go#32232
Change-Id: I1c99e9ee56d18f02c44c749d33679aa4e561c620
GitHub-Last-Rev: 20d46b30b520572b05e3228d9e43ba46dfd1be3d
GitHub-Pull-Request: golang/tools#112
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181578
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
We panic if the uri was not a valid file uri instead
They always are a valid file URI, and we would fail miserably to cope if they were
not anyway, and there are lots of places where we need to be able to get the filename
and don't want to cope with an error that cannot occur.
If we ever have not file uri's, you will have to check if it is a file before calling
.Filename, which seems reasonable anyway.
Change-Id: Ifb26a165bd43c2d310378314550b5749b09e2ebd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181017
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an "experimentalDisabledAnalyses" configuration
to the "gopls" configuration. A user can specify a list of excluded
analyses by analyzer name.
Fixesgolang/go#31717
Change-Id: I4b162fcd61ecfcef5c926bd0e96f182748a7721d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179920
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change implements the find all references feature by finding all of
the uses and definitions of the identifier within the current package.
Testing for references is done using "refs" in the testdata files and
marking the references in the package.
Change-Id: Ieb44b68608e940df5f65c3052eb9ec974f6fae6c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181122
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change marks any unresolved packages discovered as imports by
go/packages.Load. It re-runs go/packages.Load for any package with
missing imports, which will result in the LSP registering changes in
dependencies.
However, this means that we re-run go/packages.Load on
package's with unresolved imports much more than we normally would, so
it may result in a slowdown or unexpected behavior. I'm not sure if this
is necessarily the correct approach here.
Updates golang/go#32232
Change-Id: Id611fa1876e42c88ca2c3e4db30da66dc66945fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change enables the trimmed ASTs behavior and fixes the broken
tests by caching parse errors along with the ASTs that are being reused.
Change-Id: Ia8e7cdb138c62a8be88659f801506e03f213fe8c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181357
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change marks the overlay for a saved file as "on disk".
This will reduce the number of overlays we provide to go/packages, which
can be expensive.
Updates golang/go#31796, golang/go#32457
Change-Id: I8e69503ab80bba29caf4e42491d87e643bf17f1a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/181123
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Peter Weinberger <pjw@google.com>
This change correctly invalidates the cache when we
have to go from a trimmed to untrimmed AST.
The "ignoreFuncBodies" behavior is still disabled due to a racy test.
Updates golang/go#30309
Change-Id: I6b89d1d2140d77517616cb3956721a157c25ab71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180857
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change refactors hover to generate documentation for just the
declaration portion of an identifier.
Updates golang/go#29151
Change-Id: I16d48a99b56c36132e49cc87e2736f85c88ed14a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180657
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
On FileHandle Read now just returns the data hash and error
This makes it more obvious that you should handle the error, rather than hiding
it all in a struct.
We also change the way we get and return content, the main source.File
constructs now hold a FileHandle that then updates on invalidation
Change-Id: I20be1b995355e948244342130eafec056df10081
Reviewed-on: https://go-review.googlesource.com/c/tools/+/180417
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This updates overlays immeditely, and uses the handle identity change to
correctly update the content on demand.
Fixesgolang/go#32348
Change-Id: I3125a6350cac358b7c0f7dc11f2bd11ae1f41031
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179922
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We split aquiring a "handle" from reading a files contents so that we can do the
former eagerly and the latter lazily.
We also "version" the handles so that the same file at different versions is a
different handle.
Change-Id: I06cc346d4b4c77d784aa454702c54689f2f177e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179917
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a few simple tests for the goimports behavior of gopls.
There are still missing cases for non-standard library, but this is a
good start.
Change-Id: I2f9bc2cc876dcabf81413384b83fa3508517adf0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179918
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add 'buildFlags' config to processConfig and pass that value to packages.Config.
We can avoid incorrect diagnostics such as if current source codes require any build tags.
Change-Id: Id191469ec75eedaa82b75ec4fdec084fa78c2c5d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178782
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change trims the function bodies from the ASTs of files belonging to
dependency packages. In these cases, we do not necessarily need full
file ASTs, so it's not necessary to store the function bodies in memory.
This change will reduce memory usage. However, it will also slow down
the case of a user opening a file in a dependency package, as we will
have to re-typecheck the file to get the full AST. Hopefully, this
increase in latency will not be significant, as we will only need to
re-typecheck a single package (all the dependencies should be cached).
Updates golang/go#30309
Change-Id: I7871ae44499c851d1097087bd9d3567bb27db691
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178719
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change fixes a regression introduced by the building the builtin
package on demand. Although this change increases the startup tasks of
gopls, it is necessary to ensure that we ignore diagnostics from
builtin.go.
Change-Id: I897e747a273056d70cecba486a74c75a736d8f80
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179921
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also add a new rendering mode, and clean up the plain text one.
Then use it to add an info page to to the server in debug mode.
Change-Id: Ifa66a75260965d0e46e874200203ebbc4490e424
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179497
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There were several returns in this function that could leak both the
wg.Done() and <-ioLimit. This refactors them into defers close to their
counterparts.
Additionally I refactored the function to favor early returns over
nested if statements.
Fixesgolang/go#32368
Change-Id: I5357d11ee526c1cb7a6bd1a0f652c61d574c10ab
GitHub-Last-Rev: bfa160b9fd75c4464d2e0a2820c04ddae01de21f
GitHub-Pull-Request: golang/tools#107
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179878
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Following CL 179157, client/registerCapapbility and
client/unregisterCapapbility are both (void) requests, not
notifications. Hence the client must send a response, else the server
will wait forever.
Fixesgolang/go#32322
Change-Id: I77969317465c0c31fb29d27519d655712d8c3c2a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179359
Reviewed-by: Peter Weinberger <pjw@google.com>
This will allow diagnostics to denote the range they apply to.
The ranges are now interpreted using the internal/span library.
This is primarily intended for the benefit of the LSP, which will
be able to (in future CLs) more accurately highlight the part
of the code a diagnostic applies to.
Change-Id: Ic35cec2b21060c9dc6a8f5ebb7faa62d81a07435
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179237
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This adds a framework for gopls server debugging pages, and adds the standard profiling pages to it.
Change-Id: Ie319e4ad070ac41b2ae7791cb3e0e5bb4ae12ef4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179277
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change fixes the test failure that has appeared in a few TryBot
runs.
Change-Id: If583555250d63b7f446ec7d8eb09810b842633ae
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179437
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Although they have null responses, client/[un]registerCapability messages
are RPCs from golps to the editor, not notifications.
(This bug had unknown impact.)
Change-Id: I3be2eb30b46f937b8ec29d1668f682b797d84be9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/179157
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a stub modFile struct for use in the future. It also
moves the singleDiagnostic function out into the lsp package, so that
the source package does not make decisions about what to show to the
user as a diagnostic.
Fixesgolang/go#32221
Change-Id: I577c66fcd3c1daadaa221b52ff36bfa0fe07fb53
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178681
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
These are the latest changes to vscode-languageserver-node brought to Go.
Change-Id: I88d0b384356964c358cb2c51ea3b79cb6b51b434
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178357
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The Go file changes didn't actually check the file extensions for the
files the Go extension is receiving. This error was not noticed because
the VSCode extension doesn't yet actually send mod files to gopls yet,
but it will in its next release.
Fixesgolang/go#32178
Change-Id: Ia04d0a92ce7df13fcf4c601421bc000d69855f6d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178679
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This moves the fileset down to the base cache, the overlays down to the session
and stores the environment on the view.
packages.Config is no longer part of any public API, and the config is build on
demand by combining all the layers of cache.
Also added some documentation to the main source pacakge interfaces.
Change-Id: I058092ad2275d433864d1f58576fc55e194607a6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178017
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Completions like "foo.Bar(baz.<>)" were replacing one too many
characters resulting in "foo.Bar(baz.Qux()". This is because the go
parser adds a phantom "_" identifier when parsing "foo.". We thought
the "_" was really there, so we were issuing text edits to replace
it. Fix by ignoring "_" selectors when the cursor is positioned to
their left.
Fixesmicrosoft/vscode-go#2525
Change-Id: I1233a9d6275e2a79b666ca0230862238160b4aab
GitHub-Last-Rev: de9a3f00187b1b9bfcc4e497461f4602ae6f8923
GitHub-Pull-Request: golang/tools#104
Reviewed-on: https://go-review.googlesource.com/c/tools/+/178217
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a package has an error that makes it completely unparseable, such as containing a .go file with no "package" statement, the error was previously unreported. Such errors would manifest as other errors.
Fixesgolang/go#31712
Change-Id: I11b8d0e2e4d64b03fbcb4c35e7f0b02fccc83fad
GitHub-Last-Rev: 1581cbe36c269dd964f0b9226dbd63b1650c2a5b
GitHub-Pull-Request: golang/tools#102
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177605
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The insertion range for completion items was not right. The range's
end was 1 before the start. Fix by taking into account the length of
the prefix when generating the range start and end.
Now instead of a "prefix", we track the completion's
"surrounding". This is basically the start and end of the abutting
identifier along with the cursor position. When we insert the
completion text, we overwrite the entire identifier, not just the
prefix. This fixes postfix completion like completing "foo.<>Bar" to
"foo.BarBaz".
Fixesgolang/go#32078Fixesgolang/go#32057
Change-Id: I9d065a413ff9a6e20ae662ff93ad0092c2007c1d
GitHub-Last-Rev: af5ab4d60566bf0589d9a712c80d75280178cba9
GitHub-Pull-Request: golang/tools#103
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177757
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support for definitions and hover for builtin types and
functions. It also includes some small (non-logic) changes to the import
spec definition function.
Additionally, there are some resulting changes in diagnostics to ignore
the builtin file but also use it for definitions (Ian, you were right
with your comment on my earlier review...).
Fixesgolang/go#31696
Change-Id: I52d43d010a5ca8359b539c33e40782877eb730d0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is primarily to separate the levels because they have different cache
lifetimes and sharability.
This will allow us to share results between views and even between servers.
Change-Id: I280ca19d17a6ea8a15e48637d4445e2b6cf04769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change removes the explicit configuration for improved
documentation on hover. We use a comment's synopsis rather than the full
comment.
However, we also add a "noDocsOnHover" setting that is used by the cmd
tests. Ultimately, no one should use this setting and we should remove
it. We leave it temporarily because the cmd tests still need work.
Change-Id: I5488eca96a729ed7edad8f59b95af163903740d6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174378
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Calculate expected type in the following cases:
- switch case statements
- index expressions (e.g. []int{}[<>] or map[string]int{}[<>])
- slice expressions (e.g. []int{}[1:<>])
- channel send statements
- channel receive expression
We now also prefer type names in type switch clauses and type asserts.
Change-Id: Iff8c317a9116868b36701d931c802d9147f962d8
GitHub-Last-Rev: e039a45aebe1c6aa9b2011cad67ddaa5e4ed4d77
GitHub-Pull-Request: golang/tools#97
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176941
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This abstracts out the concrete file type so that we can support non go files.
Change-Id: I7447daa2ce076ec2867de9e59a0dedfe1a0553f5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175217
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We correcly cancel all background tasks and drop all active views when
the server is asked to shut down now.
This was mostly to support the command line being able to exit cleanly
Change-Id: Iff9f5ab51572aad5e3245dc01aa87b00dcd47963
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174940
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change handles the case when a function that has already been
written out is being completed.
Change-Id: I0c4e9ec9bb5a8428526f00a4e62e020bcc30f0bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176923
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The cache now exposes only one symbol, NewView
This is preparing the cache for a re-write
Change-Id: I411c2cd7a7edc2e7c774218c6786f9fd4fcc53cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176924
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses the builtin package to derive the signature help for
builtin functions.
Updates golang/go#31696
Change-Id: I458b3a89bdf143e7018e8be7cb6a5e8c068a47c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176922
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We were omitting the parens in function completions like "(foo<>)()"
because our check thought "foo" was the Fun in the outer CallExpr so
it already had parens. Fix by tightening up logic to only omit parens
for cases like "foo<>()" and "foo.bar<>()".
Change-Id: Ia602b80275f72baa6cdf6d61c22d3f3a6cfc3019
GitHub-Last-Rev: 41fecf92617e0812ee6552d8c43789eae83889bd
GitHub-Pull-Request: golang/tools#98
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176944
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change stops diagnostics from running in files making up the "fake"
builtin package.
Fixesgolang/go#31962
Change-Id: Ic54e1587e3ad54f0c1f5e82f1a6f3522b4c6bee9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/177218
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
After some discussion about how to handle insert and filter text
(https://github.com/microsoft/vscode-languageserver-node/issues/488), it
seems that it is better practice to overwrite the prefix in completion
items, rather than trimming the prefix from the insert text.
Change-Id: I7c794b4b1d4518af31e7318a283aa3681a0cf66a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176958
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Fix the following issues:
- We were trying to complete struct literal field names for
selector expressions (e.g. "Foo{a.B<>}"). Now we only complete field
names in this case if the expression is an *ast.Ident.
- We weren't including lexical completions in cases where you might be
completing a field name or a variable name (e.g. "Foo{A<>}").
I refactored composite literal logic to live mostly in one place. Now
enclosingCompositeLiteral computes all the bits of information related
to composite literals. The expected type, completion, and snippet code
make use of those precalculated facts instead of redoing the work.
Change-Id: I29fc808544382c3c77f0bba1843520e04f38e79b
GitHub-Last-Rev: 3489062be342ab0f00325d3b3ae9ce681df7cf2e
GitHub-Pull-Request: golang/tools#96
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176601
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Partly fixesgolang/go#31333 (responds to shutdown request, but does
not reject later requests)
Fixes: golang/go#31375 by adding DO NOT EDIT comments to tsclient.go,
tsserver.go, and further details in the package doc in tsprotocol.go,
following the rule in golang/go#13560
Change-Id: I412e3dc6661373b8b70cdd15a385ad7bbd55a897
Reviewed-on: https://go-review.googlesource.com/c/tools/+/176921
Run-TryBot: Peter Weinberger <pjw@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also log gopls version information on startup in server mode.
Change-Id: If7bf85d19f993430709b1fae83083e6fdfe1b2ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175199
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This also required us to change the way we map files to a view, as it may change
over time.
Fixesgolang/go#31635
Change-Id: Ic82467a1185717081487389f4c25ad69df1af290
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175477
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
specifically it uses them for the guru compatability tests
This change radically increases the test coverage of the godef tests as it now
works for all the jump to definition tests not just the specialized ones.
Change-Id: I63547138566ac3de56344dcfddb758ed5f362a06
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174937
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This required extensive changes to the "internal" server handling and also to
the way we wait for diagnostics in the "check" verb.
It improves both memory and time by over an order of magnitude, hopefully
allowing us to renable the tests on the builders
Change-Id: I84e84ca4c449e9970ebf1d922a0a2ce0a8a49c72
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175878
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Improve expected type determination for the following cases:
- search back further through ast path to handle cases where the
position's node is more than two nodes from the ancestor node with
type information
- generate expected type for return statements
- wrap and unwrap pointerness from expected type when position is
preceded by "*" (dereference) or "&" (reference) operators,
respectively
- fix some false positive expected types when completing the "Fun"
(left) side of a CallExpr
Change-Id: I907ee3e405bd8420031a7b03329de5df1c3493b9
GitHub-Last-Rev: 20a0ac9bf2b5350494c6738f5960676cc50fb454
GitHub-Pull-Request: golang/tools#93
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174477
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now the "type" of a *ast.PkgName is the package it points to. Of
course, a package is not a real types.Type, but we can still jump you
there. We have to pick one of the package's files, so we choose the
longest one, hoping it is the most interesting.
Similarly, the "definition" of an *ast.ImportSpec is the package being
imported.
I also added a nil check for the package in SignatureHelp. This panics
for me occasionally.
Change-Id: Ide4640530a28bcec9da6de36723eb7f0e4cc941c
GitHub-Last-Rev: 8190baa0b908065db5b53f236de03d2f3bff39b5
GitHub-Pull-Request: golang/tools#92
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174081
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Prior to this change, if a package was rendered invalid by a change in
one of its dependencies, diagnostics would not be propagated until the
user typed in one of the package's files. Now, these updated diagnostics
are sent along with the diagnostics for the dependency.
Fixesgolang/go#29817
Change-Id: I4761de31c4bdee820e024005f6112b3b3d2e1da6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174977
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Updates that only add text have a start and end that are the same, we were
erroring on those and failing to apply the changes.
Fixesgolang/go#31800
Change-Id: Ia31b90f108742e5532d2da35137c347c26090a6a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174949
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I was about to add some more tests and it caused a huge number of golden files,
which was hard to deal with. Now all the golden files are packed into a single
.golden archive in the txtar format.
I also changed the tagging key for hover results to use the marker name rather
than the line and column, as it makes it more stable against test data changes.
Change-Id: Iaa1f54ab55a41d380db67b9f6f928fa7a52d9a5e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/174877
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
RangeFormatting was broken with the introduction of the diff library,
but not noticed until golang/go#31150. Temporarily disable this behavior
until we fix it.
Change-Id: Ie3e50a763e0c0e8672ad20c3a2e37d901325d356
Reviewed-on: https://go-review.googlesource.com/c/tools/+/175938
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
