When compiling expression switches, we try to optimize runs of
constants into binary searches. The ordering used isn't visible to the
application, so it's unimportant as long as we're consistent between
sorting and searching.
For strings, it's much cheaper to compare string lengths than strings
themselves, so instead of ordering strings by "si <= sj", we currently
order them by "len(si) < len(sj) || len(si) == len(sj) && si <= sj"
(i.e., the lexicographical ordering on the 2-tuple (len(s), s)).
However, it's also somewhat cheaper to compare strings for equality
(i.e., ==) than for ordering (i.e., <=). And if there were two or
three string constants of the same length in a switch statement, we
might unnecessarily emit ordering comparisons.
For example, given:
switch s {
case "", "1", "2", "3": // ordered by length then content
goto L
}
we currently compile this as:
if len(s) < 1 || len(s) == 1 && s <= "1" {
if s == "" { goto L }
else if s == "1" { goto L }
} else {
if s == "2" { goto L }
else if s == "3" { goto L }
}
This CL switches to using a 2-level binary search---first on len(s),
then on s itself---so that string ordering comparisons are only needed
when there are 4 or more strings of the same length. (4 being the
cut-off for when using binary search is actually worthwhile.)
So the above switch instead now compiles to:
if len(s) == 0 {
if s == "" { goto L }
} else if len(s) == 1 {
if s == "1" { goto L }
else if s == "2" { goto L }
else if s == "3" { goto L }
}
which is better optimized by walk and SSA. (Notably, because there are
only two distinct lengths and no more than three strings of any
particular length, this example ends up falling back to simply using
linear search.)
Test case by khr@ from CL 195138.
Fixes#33934.
Change-Id: I8eeebcaf7e26343223be5f443d6a97a0daf84f07
Reviewed-on: https://go-review.googlesource.com/c/go/+/195340
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Remove redundant code and improve documentation in the process.
Fixes#34211.
Change-Id: I9a6d1467f1a2c98a163f41f9df147fc6500c6fad
Reviewed-on: https://go-review.googlesource.com/c/go/+/196077
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We used to use OXCASE to represent general, possibly multi-valued
cases, and then desugar these during walk into single-value cases
represented by OCASE.
In CL 194660, we switched to eliminated the desugaring step and
instead handle the multi-valued cases directly, which eliminates the
need for an OCASE Op. Instead, we can simply remove OCASE, and rename
OXCASE to just OCASE.
Passes toolstash-check.
Change-Id: I3cc184340f9081d37453927cca1c059267fdbc12
Reviewed-on: https://go-review.googlesource.com/c/go/+/196117
Reviewed-by: Keith Randall <khr@golang.org>
When emitting base cases, previously we would emit:
if c1 { s1 }
if c2 { s2 }
if c3 { s3 }
With this CL, we instead emit:
if c1 { s1 }
else if c2 { s2 }
else if c3 { s3 }
Most of the time, this doesn't make a difference, because s1/s2/s3 are
typically "goto" statements. But for type switches, we currently emit:
if hash == 271 { if _, ok := iface.(T1); ok { goto t1case } }
if hash == 314 { if _, ok := iface.(T2); ok { goto t2case } }
That is, the if bodies can fallthrough, even though it's impossible
for them to match any of the subsequent cases.
Change-Id: I453d424d0b5e40060a703738bbb374523f1c403c
Reviewed-on: https://go-review.googlesource.com/c/go/+/195339
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Complete interfaces before comparing them with Checker.identical.
This requires passing through a *Checker to various functions that
didn't need this before.
Verified that none of the exported API entry points for interfaces
that rely on completed interfaces are used internally except for
Interface.Empty. Verified that interfaces are complete before
calling Empty on them, and added a dynamic check in the exported
functions.
Unfortunately, this fix exposed another problem with an esoteric
test case (#33656) which we need to reopen.
Fixes#34151.
Updates #33656.
Change-Id: I4e14bae3df74a2c21b565c24fdd07135f22e11c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/195837
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change adds testable examples for the new Microseconds and Milliseconds methods that were introduced in Go 1.13.
Fixes#34354
Change-Id: Ibdbfd770ca2192f9086f756918325f7327ce0482
GitHub-Last-Rev: 4575f48f5f
GitHub-Pull-Request: golang/go#34355
Reviewed-on: https://go-review.googlesource.com/c/go/+/195979
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
RELNOTE=This change adds an underscore to all Go symbols in darwin, and
the behavior might be confusing to users of tools like "nm", etc.
Fixes#33808
Change-Id: I19ad626026ccae1e87b3bb97b6bb9fd55e95e121
Reviewed-on: https://go-review.googlesource.com/c/go/+/195619
Run-TryBot: Jeremy Faller <jeremy@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The elf reader's method for reading in DWARF section data has support
for applying selected relocations when the debug/dwarf readers are
being used on relocatable objects. This patch extends the set of
relocations applied slightly. In particlar, prior to this for some
architectures we were only applying relocations whose target symbol
was a section symbol; now we also include some relocations that target
other symbols. This is needed to get meaningful values for compilation
unit DIE low_pc attributes, which typically target a specific function
symbol in text.
Fixes#31363.
Change-Id: I34b02e7904cd7f2dea74197f73fa648141d15212
Reviewed-on: https://go-review.googlesource.com/c/go/+/195679
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As correctly pointed out by Giovanni Bajo, doing a single regexp pass
should be much faster than doing hundreds per architecture. We can then
use a map to keep track of what ops are handled in each file. And the
amount of saved work is evident:
name old time/op new time/op delta
Rulegen 2.48s ± 1% 2.02s ± 1% -18.44% (p=0.008 n=5+5)
name old user-time/op new user-time/op delta
Rulegen 10.9s ± 1% 8.9s ± 0% -18.27% (p=0.008 n=5+5)
name old sys-time/op new sys-time/op delta
Rulegen 209ms ±28% 236ms ±18% ~ (p=0.310 n=5+5)
name old peak-RSS-bytes new peak-RSS-bytes delta
Rulegen 178MB ± 3% 176MB ± 3% ~ (p=0.548 n=5+5)
The speed-up is so large that we don't need to parallelize it anymore;
the numbers above are with the removed goroutines. Adding them back in
doesn't improve performance noticeably at all:
name old time/op new time/op delta
Rulegen 2.02s ± 1% 2.01s ± 1% ~ (p=0.421 n=5+5)
name old user-time/op new user-time/op delta
Rulegen 8.90s ± 0% 8.96s ± 1% ~ (p=0.095 n=5+5)
While at it, remove an unused method.
Change-Id: I328b56e63b64a9ab48147e67e7d5a385c795ec54
Reviewed-on: https://go-review.googlesource.com/c/go/+/195739
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
golang.org/cl/109517 optimized the compiler to avoid the allocation for make in
append(x, make([]T, y)...). This was only implemented for the case that y has type int.
This change extends the optimization to trigger for all integer types where the value
is known at compile time to fit into an int.
name old time/op new time/op delta
ExtendInt-12 106ns ± 4% 106ns ± 0% ~ (p=0.351 n=10+6)
ExtendUint64-12 1.03µs ± 5% 0.10µs ± 4% -90.01% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
ExtendInt-12 0.00B 0.00B ~ (all equal)
ExtendUint64-12 13.6kB ± 0% 0.0kB -100.00% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
ExtendInt-12 0.00 0.00 ~ (all equal)
ExtendUint64-12 1.00 ± 0% 0.00 -100.00% (p=0.000 n=10+10)
Updates #29785
Change-Id: Ief7760097c285abd591712da98c5b02bc3961fcd
Reviewed-on: https://go-review.googlesource.com/c/go/+/182559
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Now that mid-stack inlining reports backtraces correctly, we no
longer need to protect against inlining in a few critical areas.
Update #19348
Update #28640
Update #34276
Change-Id: Ie68487e6482c3a9509ecf7ecbbd40fe43cee8381
Reviewed-on: https://go-review.googlesource.com/c/go/+/195818
Reviewed-by: David Chase <drchase@google.com>
This slightly simplified the code. I stumbled upon this when support was
being added to Fuchsia (and this pattern was initially cargo-culted).
Change-Id: Ica090a118a0056c5c1b51697691bc7308f0d424a
Reviewed-on: https://go-review.googlesource.com/c/go/+/177878
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add support for assembling integer computational instructions.
Based on the riscv-go port.
Updates #27532
Change-Id: Ibf02649eebd65ce96002a9ca0624266d96def2cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/195079
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This eliminates an old TODO.
Change-Id: I36d666905f43252f5d338b11ef9c1ed8b5f22b1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/195817
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are a lot of complexities to handling switches efficiently:
1. Order matters for expression switches with non-constant cases and
for type expressions with interface types. We have to respect
side-effects, and we also can't allow later cases to accidentally take
precedence over earlier cases.
2. For runs of integers, floats, and string constants in expression
switches or runs of concrete types in type switches, we want to emit
efficient binary searches.
3. For runs of consecutive integers in expression switches, we want to
collapse them into range comparisons.
4. For binary searches of strings, we want to compare by length first,
because that's more efficient and we don't need to respect any
particular ordering.
5. For "switch true { ... }" and "switch false { ... }", we want to
optimize "case x:" as simply "if x" or "if !x", respectively, unless x
is interface-typed.
The current swt.go code reflects how these constraints have been
incrementally added over time, with each of them being handled ad
hocly in different parts of the code. Also, the existing code tries
very hard to reuse logic between expression and type switches, even
though the similarities are very superficial.
This CL rewrites switch handling to better abstract away the logic
involved in constructing the binary searches. In particular, it's
intended to make further optimizations to switch dispatch much easier.
It also eliminates the need for both OXCASE and OCASE ops, and a
subsequent CL can collapse the two.
Passes toolstash-check.
Change-Id: Ifcd1e56f81f858117a412971d82e98abe7c4481f
Reviewed-on: https://go-review.googlesource.com/c/go/+/194660
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL expands the test for #29612 to check that type switches also
work correctly when type hashes collide.
Change-Id: Ia153743e6ea0736c1a33191acfe4d8ba890be527
Reviewed-on: https://go-review.googlesource.com/c/go/+/195782
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unmarshaling a string into a json.Number should first check that the string is a valid Number.
If not, we should fail without decoding it.
Fixes#14702
Change-Id: I286178e93df74ad63c0a852c3f3489577072cf47
GitHub-Last-Rev: fe69bb68ee
GitHub-Pull-Request: golang/go#34272
Reviewed-on: https://go-review.googlesource.com/c/go/+/195045
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We use go/format on the final output, so don't bother with the added
tabwriter work to align comments when using go/printer.
name old time/op new time/op delta
Rulegen 2.53s ± 2% 2.48s ± 1% -2.20% (p=0.032 n=5+5)
name old user-time/op new user-time/op delta
Rulegen 11.2s ± 1% 10.8s ± 0% -3.72% (p=0.008 n=5+5)
name old sys-time/op new sys-time/op delta
Rulegen 218ms ±17% 207ms ±19% ~ (p=0.548 n=5+5)
name old peak-RSS-bytes new peak-RSS-bytes delta
Rulegen 184MB ± 3% 175MB ± 4% ~ (p=0.056 n=5+5)
Change-Id: I53bad2ab15cace67415f2171fffcd13ed596e62b
Reviewed-on: https://go-review.googlesource.com/c/go/+/195219
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
rulegen has a sanity check that ensures all the arch-specific opcodes
are handled by each of the gen files.
This is an expensive chunk of work, particularly since there are a lot
of opcodes in total, and each one of them compiles and runs a regular
expression.
Parallelize that for each architecture, which greatly speeds up 'go run
*.go' on my laptop with four real CPU cores.
name old time/op new time/op delta
Rulegen 3.39s ± 1% 2.53s ± 2% -25.34% (p=0.008 n=5+5)
name old user-time/op new user-time/op delta
Rulegen 10.6s ± 1% 11.2s ± 1% +6.09% (p=0.008 n=5+5)
name old sys-time/op new sys-time/op delta
Rulegen 201ms ± 7% 218ms ±17% ~ (p=0.548 n=5+5)
name old peak-RSS-bytes new peak-RSS-bytes delta
Rulegen 182MB ± 3% 184MB ± 3% ~ (p=0.690 n=5+5)
Change-Id: Iec538ed0fa7eb867eeeeaab3da1e2615ce32cbb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/195218
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Support for overlapping interfaces is a new (proposed) Go language
feature to be supported in Go 1.14, so it shouldn't be supported under
-lang=go1.13 or earlier.
Fixes#34329.
Change-Id: I5fea5716b7d135476980bc40b4f6e8c611b67735
Reviewed-on: https://go-review.googlesource.com/c/go/+/195678
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts CL 192101.
Reason for revert: The same paragraph was added 2 weeks ago
(look a few lines above)
Change-Id: I05efb2631d7b4966f66493f178f2a649c715a3cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/195637
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The '-trimpath' flag tells 'go build' to trim any paths from the
output files that are tied to the current workspace or toolchain. When
this flag is set, we do not need to include the package directory in
the text hashed to construct the action ID for each package.
Fixes#33772
Change-Id: I20b902d2f58019709b15864ca79aa0d9255ae707
Reviewed-on: https://go-review.googlesource.com/c/go/+/195318
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This information is redundant with the position information already
provided. Also, no other -m diagnostics print out function name.
While here, report parameter leak diagnostics against the parameter
declaration position rather than the function, and use Warnl for
"moved to heap" messages.
Test cases updated programmatically by removing the first word from
every "no match for" error emitted by run.go:
go run run.go |& \
sed -E -n 's/^(.*):(.*): no match for `([^ ]* (.*))` in:$/\1!\2!\3!\4/p' | \
while IFS='!' read -r fn line before after; do
before=$(echo "$before" | sed 's/[.[\*^$()+?{|]/\\&/g')
after=$(echo "$after" | sed -E 's/(\&|\\)/\\&/g')
fn=$(find . -name "${fn}" | head -1)
sed -i -E -e "${line}s/\"${before}\"/\"${after}\"/" "${fn}"
done
Passes toolstash-check.
Change-Id: I6e02486b1409e4a8dbb2b9b816d22095835426b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/195040
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Try to deflake TestNohup.
The kernel will deliver a signal as a thread returns from a syscall.
If the only active thread is sleeping, and the system is busy,
the kernel may not get around to waking up a thread to catch the signal.
Try splitting up the sleep, to give the kernel another change to deliver.
I don't know if this will help, but it seems worth a try.
Fixes#33174
Change-Id: I34b3240af706501ab8538cb25c4846d1d30d7691
Reviewed-on: https://go-review.googlesource.com/c/go/+/194879
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Zeroing unused registers is not required. Removing it makes the code
very slightly smaller and very slightly faster.
Change-Id: I1ec17b497db971ca8a3641e3e94c063571419f27
GitHub-Last-Rev: f721bb2636
GitHub-Pull-Request: golang/go#31596
Reviewed-on: https://go-review.googlesource.com/c/go/+/173160
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Update the section in asm.html related to PPC64. Remove the line
that says it is in an experimental state, add a link to the
new doc.go file that has all the detail for the Go assembler for
PPC64.
Change-Id: I45d9891669e01d94e2721be576d572e02cd9d2db
Reviewed-on: https://go-review.googlesource.com/c/go/+/183840
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add quotes when marshaling a json.Number with the string option
set via a struct tag. This ensures that the resulting json
can be unmarshaled into the source struct without error.
Fixes#34268
Change-Id: Ide167d9dec77019554870b5957b37dc258119d81
GitHub-Last-Rev: dde81b7120
GitHub-Pull-Request: golang/go#34269
Reviewed-on: https://go-review.googlesource.com/c/go/+/195043
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It is useful to know about the -all_codegen option for running
codegen tests for all platforms. I was puzzling that some codegen
test was not failing on my local machine or on trybot, until I
found this option.
Change-Id: I062cf4d73f6a6c9ebc2258195779d2dab21bc36d
Reviewed-on: https://go-review.googlesource.com/c/go/+/192101
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The wasm_exec.js wrapper tries to set up the argv and envp following
the UNIX conventions, but doesn't get it quite right, which can cause
runtime.goenv to crash if you get unlucky.
The main problem was that the envp array wasn't terminated with a nil
pointer, so the runtime didn't know when to stop reading the array.
This CL adds that nil pointer to the end of the envp array.
The other problem was harmless, but confusing. In the UNIX convention,
the argv array consists of argc pointers followed by a nil pointer,
followed by the envp array. However, wasm_exec.js put the environment
variable count between the two pointer arrays rather than a nil
pointer. The runtime never looks at this slot, so it didn't matter,
but the break from convention left Cherry and I trying to debug why it
*wasn't* losing any environment variables before we realized that that
layouts happened to be close enough to work. This CL switches to the
UNIX convention of simply terminating the argv array with a nil
pointer.
Change-Id: Ic9a4cd9eabb5dfa599a809b960f9e579b9f1f4db
Reviewed-on: https://go-review.googlesource.com/c/go/+/193417
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Richard Musiol <neelance@gmail.com>
This CL fixes a bug in ParseExprFrom which makes
error messages ignored when there are 10+ errors
in a single expression.
fixes#34241fixes#34274
Change-Id: I29a82d3e3e726279005eb6fbcd7ee3aebffaa679
Reviewed-on: https://go-review.googlesource.com/c/go/+/194638
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The Lmsgprefix flag moves the logger's prefix from the
beginning of the line to after the log header. For example,
a logger with the prefix "LOG " and LstdFlags would output:
LOG 2009/11/10 23:00:00 entry text
Adding the Lmsgprefix flag would output:
2009/11/10 23:00:00 LOG entry text
Fixes#32062
Change-Id: I9f7c9739abeb53c424112aaeed33444eeefdfbbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/186182
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
If a generated test main package transitively depends on a main
package, the main package will now always be rebuilt as a library and
will not be compiled with '-p main'.
This expands the fix for #30907, which only applied to packages with
the BuildInfo set (main packages built in module mode). Linking
multiple packages with BuildInfo caused link errors, but it appears
these errors apply to some symbols in GOPATH mode.
Fixes#34114
Change-Id: Ic1e53437942269a950dd7e45d163707922c92edd
Reviewed-on: https://go-review.googlesource.com/c/go/+/195279
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Simplify determineLinkMode by calling mustLinkExternal upfront,
then doing a first pass for LinkModeAuto, followed by a second pass
that determines if the link mode is valid.
Change-Id: I9d7668107c159f8fe330b8c05fee035bbe9875fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/195078
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds an intrinsic for Mul64 on s390x. To achieve that,
a new assembly instruction, MLGR, is introduced in s390x/asmz.go. This assembly
instruction directly uses an existing instruction on Z and supports multiplication
of two 64 bit unsigned integer and stores the result in two separate registers.
In this case, we require the multiplcand to be stored in register R3 and
the output result (the high and low 64 bit of the product) to be stored in
R2 and R3 respectively.
A test case is also added.
Benchmark:
name old time/op new time/op delta
Mul-18 11.1ns ± 0% 1.4ns ± 0% -87.39% (p=0.002 n=8+10)
Mul32-18 2.07ns ± 0% 2.07ns ± 0% ~ (all equal)
Mul64-18 11.1ns ± 1% 1.4ns ± 0% -87.42% (p=0.000 n=10+10)
Change-Id: Ieca6ad1f61fff9a48a31d50bbd3f3c6d9e6675c1
Reviewed-on: https://go-review.googlesource.com/c/go/+/194572
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts CL 194381
Reason for revert: break tests like add2line.
Change-Id: I9e858c7ada340a842bd0cad719616ad30fae4aaa
Reviewed-on: https://go-review.googlesource.com/c/go/+/195137
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Provide the initial framework for the riscv64 assembler. For now this
only supports raw WORD instructions, but at least allows for basic
testing. Additional functionality will be added in separate changes.
Based on the riscv-go port.
Updates #27532
Change-Id: I181ffb2d37a34764a3e91eded177d13a89c69f9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/194117
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Since the cache has been required since Go 1.12, also remove redundant
checks for a nil cache.
Updates #29127
Updates #29667
Change-Id: Ibc59b659306a4eef2d4f0e3d0b651986d6cf84ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/188021
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
No changes in compilebench, pass toolstash-check.
Change-Id: I2688f7b45af0eaa0cf3b38e726bce6e68c20f69c
Reviewed-on: https://go-review.googlesource.com/c/go/+/195077
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This skeleton follows the model of CL 174521,
with additions from 'relnote -html'.
Updates #33738
Updates #30439
Change-Id: I0f88ff7f231b7728dca0695143f2f2eda74d60c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/195058
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
