Currently activeStackChans is set before a goroutine blocks on a channel
operation in an unlockf passed to gopark. The trouble is that the
unlockf is called *after* the G's status is changed, and the G's status
is what is used by a concurrent mark worker (calling suspendG) to
determine that a G has successfully been suspended. In this window
between the status change and unlockf, the mark worker could try to
shrink the G's stack, and in particular observe that activeStackChans is
false. This observation will cause the mark worker to *not* synchronize
with concurrent channel operations when it should, and so updating
pointers in the sudog for the blocked goroutine (which may point to the
goroutine's stack) races with channel operations which may also
manipulate the pointer (read it, dereference it, update it, etc.).
Fix the problem by adding a new atomically-updated flag to the g struct
called parkingOnChan, which is non-zero in the race window above. Then,
in isShrinkStackSafe, check if parkingOnChan is zero. The race is
resolved like so:
* Blocking G sets parkingOnChan, then changes status in gopark.
* Mark worker successfully suspends blocking G.
* If the mark worker observes parkingOnChan is non-zero when checking
isShrinkStackSafe, then it's not safe to shrink (we're in the race
window).
* If the mark worker observes parkingOnChan as zero, then because
the mark worker observed the G status change, it can be sure that
gopark's unlockf completed, and gp.activeStackChans will be correct.
The risk of this change is low, since although it reduces the number of
places that stack shrinking is allowed, the window here is incredibly
small. Essentially, every place that it might crash now is replaced with
no shrink.
This change adds a test, but the race window is so small that it's hard
to trigger without a well-placed sleep in park_m. Also, this change
fixes stackGrowRecursive in proc_test.go to actually allocate a 128-byte
stack frame. It turns out the compiler was destructuring the "pad" field
and only allocating one uint64 on the stack.
Fixes#40641.
Change-Id: I7dfbe7d460f6972b8956116b137bc13bc24464e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/247050
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Trust: Michael Knyszek <mknyszek@google.com>
In the current implementation, we can observe crashes after calling
debug.SetMaxStack and allocating a stack larger than 4GB since
stackalloc works with 32-bit sizes. To avoid this, we define an upper
limit as the largest feasible point we can grow a stack to and provide a
better error message when we get a stack overflow.
Fixes#41228
Change-Id: I55fb0a824f47ed9fb1fcc2445a4dfd57da9ef8d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/255997
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Document the way EncodeRune currently handles runes which are
out of range. Also add an example showing that behaviour.
Change-Id: I0f8e7645ae053474ec319085a2bb6d7f73bc137c
Reviewed-on: https://go-review.googlesource.com/c/go/+/255998
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Trust: Giovanni Bajo <rasky@develer.com>
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Go Bot <gobot@golang.org>
Use the const variable Ln2 in math/const.go for function acosh.
Change-Id: I5381d03dd3142c227ae5773ece9be6c8f377615e
Reviewed-on: https://go-review.googlesource.com/c/go/+/232517
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Trust: Giovanni Bajo <rasky@develer.com>
According to POSIX, there are three formats for TZ variable. When
it refers to timezone file, it should starts with a colon. This commit
removes the colon if it exists, so that it keeps compatible with both
the spec and the old behavior.
Change-Id: I30cfeaea530d24e174de309952338cb1146694a5
GitHub-Last-Rev: 11d83d11ca
GitHub-Pull-Request: golang/go#27570
Reviewed-on: https://go-review.googlesource.com/c/go/+/134217
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: I61a13f7d6410e4931efaa20307bdf1cc0037afc0
Reviewed-on: https://go-review.googlesource.com/c/go/+/255200
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
Change-Id: I2233a6a157ec8feffaefd6a8ee65b1c38778c1cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/255238
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Giovanni Bajo <rasky@develer.com>
In the common case (<1KB types), no allocation is required
by reflect.Zero.
Also use memclr instead of memmove in Set when the source
is known to be zero.
Fixes#33136
Change-Id: Ic66871930fbb53328032e587153ebd12995ccf55
Reviewed-on: https://go-review.googlesource.com/c/go/+/192331
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
In CL 231397, we stopped marking symbols' GoType reachable in
general, but not when -linkshared. It was left as a TODO. This CL
addresses it.
The problem was that the type names are mangled in the shared
library, so we need to mangle the name consistently in the
executable as well (regardless of whether the symbol is reachable
or not), so that the GCProg generation code can find the
corresponding symbol from the shared library.
Change-Id: I1040747402929a983ec581109f1681a77893682e
Reviewed-on: https://go-review.googlesource.com/c/go/+/255964
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
When we're building a panic that's triggered by a memory fault when
SetPanicOnFault has been called, include an Addr method. This
method reports the address at which the fault occurred.
Fixes#37023
RELNOTE=yes
Change-Id: Idff144587d6b75070fdc861a36efec76f4ec7384
Reviewed-on: https://go-review.googlesource.com/c/go/+/249677
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This is testing for the limited case of zero or one SSA-able results.
One regression is that the later expansion of "Dereference" into
Move into argument slots thwarts the
MOVE A -> B, MOVE B -> C
replaced-by
MOVE A -> B, MOVE A -> C
optimization; the second move is written instead as a Dereference at the
phase where the optimization occurs, and because the target of the
dereference is not visible in the dereference, it's not possible to verify
that A and B or A and C don't overlap in some peculiar way (and for results
fed to args, they can).
Regression is repaired in a later CL by changing when calls are expanded.
Change-Id: Ia0f48a9d483d5a54a99657a24b12b25b8edde55f
Reviewed-on: https://go-review.googlesource.com/c/go/+/242782
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Still needs to generate the calls that will need lowering.
Change-Id: Ifd4e510193441a5e27c462c1f1d704f07bf6dec3
Reviewed-on: https://go-review.googlesource.com/c/go/+/242359
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When we load module retractions from the latest version of a module,
it's possible that the latest version has a different module path than
the version we're loading. This can happen when a module is renamed or
a go.mod file is added for the first time.
We should not report an error in this case. Retractions should still
apply to old aliases of a module.
Fixes#41350
Change-Id: If1bc0b6b2b26fc7023e02fc211aa0cd8eb00796e
Reviewed-on: https://go-review.googlesource.com/c/go/+/255961
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The linker prunes methods that are not directly reachable if the
receiver type is never converted to interface. A type can be
converted to interface using reflection through other types.
The linker already takes this into consideration but it missed
the case that the intermediate is a method descriptor. Handle
this case.
Change-Id: I590efc5da163c326db8d43583908a2ef67f65d9d
Reviewed-on: https://go-review.googlesource.com/c/go/+/255858
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
defaultlit2 and typecheck use the same logic for getting mixing untyped
type, so move that logic to a function.
This is a followup of CL 255217.
Passes toolstash-check.
Change-Id: Ic0eadb7ed27a2f0f72e2d28fd5438500bf4c79e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/255897
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
retsigerr was used to create error message for both wrong function
arguments and return arguments, so change its name to sigerr to reflect
that.
While at it, also add documentation for the wrong function arguments
case.
Passes toolstash-check.
Change-Id: I740c717ad38d4afab9e8c20f2e94579c8bca67ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/255240
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The revised test now checks that unsafe-uintptr correctly works for
variadic uintptr parameters too, and the CL corrects the code so this
code compiles again.
The pointers are still not kept alive properly. That will be fixed by
a followup CL. But this CL at least allows programs not affected by
that to build again.
Updates #24991.
Updates #41460.
Change-Id: If4c39167b6055e602213fb7522c4f527c43ebda9
Reviewed-on: https://go-review.googlesource.com/c/go/+/255877
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
reloads
use pushState with updated state and read it on page load,so that state
can survive across reloads.
Change-Id: I6c5e80e9747576245b979a62cb96d231d8f27d57
Reviewed-on: https://go-review.googlesource.com/c/go/+/248687
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bradford Lamson-Scribner <brad.lamson@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Josh Bleecher Snyder <josharian@gmail.com>
CL 254400 makes typecheck set untyped type correctly. We now have enough
information to check valid operators for a type in typecheck.
Passes toolstash-check.
Change-Id: I01a7606ee6ce9964ec52430d53eaa886442bd17f
Reviewed-on: https://go-review.googlesource.com/c/go/+/255617
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When -S=2 is in effect for the compiler/assembler, include symbol ABI
values for defined symbols and relocations. This is intended to help
make it easier to distinguish between a symbol and its ABI wrapper.
Change-Id: Ifbf71372392075f15363b40e882b2132406b7d6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/255718
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
Change things so that the -S command line option for the assembler
works the same as -S in the compiler, e.g. you can use -S=2 to
get additional detail.
Change-Id: I7bdfba39a98e67c7ae4b93019e171b188bb99a2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/255717
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Test this behavior incidentally in a test for ambiguous import errors.
(I rediscovered the error when writing the new test.)
For #32567
Updates #28806
Change-Id: I323f05145734e5cf99818b9f04d65075f7c0f787
Reviewed-on: https://go-review.googlesource.com/c/go/+/255046
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Previously, modload imported load, but it mainly just did so in order
to install callbacks to the modload API. This was important during vgo
development, but there's no longer a strong reason to do this. Nothing
modload imports strongly depends on load, so there's little danger of
a dependency cycle.
This change deletes the callbacks in load and instead, makes load call
exported functions in modload directly. In the future, these functions
may have different signatures than their GOPATH counterparts.
Change-Id: Ifde5c3ffebd190b5bd184924ec447d272b936f27
Reviewed-on: https://go-review.googlesource.com/c/go/+/255719
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
All necessary IFF_* consts are available in the syscall package. Use
them in linkFlags instead of duplicating them.
Change-Id: Ibd2b0f6f39f98bfad2a0c8c55d1eb64167aeee03
Reviewed-on: https://go-review.googlesource.com/c/go/+/255497
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
//go:notinheap
type T int
type U T
We already correctly propagate the notinheap-ness of T to U. But we
have an assertion in the typechecker that if there's no explicit
//go:notinheap associated with U, then report an error. Get rid of
that error so that implicit propagation is allowed.
Adjust the tests so that we make sure that uses of types like U
do correctly report an error when U is used in a context that might
cause a Go heap allocation.
Fixes#41451
Update #40954
Update #41432
Change-Id: I1692bc7cceff21ebb3f557f3748812a40887118d
Reviewed-on: https://go-review.googlesource.com/c/go/+/255637
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#41447
Change-Id: I4460c1c7962d02c41622a5ea1a3c4bc3714a1873
Reviewed-on: https://go-review.googlesource.com/c/go/+/255477
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This type is very much like TTUPLE, but not just for pairs.
Used to describe results of a pre-expansion function call.
(will later probably also be used to describe the incoming args).
Change-Id: I811850cfcc2b3de85085eb4c2eca217c04c330b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/242360
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
When 'go build' is given an output path with -o, if the output path
ends with a path separator, always treat it as a directory.
Fixes#41313
Change-Id: I9a9c25448abfcd6297ad973f5ed2025b2568a4a7
GitHub-Last-Rev: 20a19bd63a
GitHub-Pull-Request: golang/go#41314
Reviewed-on: https://go-review.googlesource.com/c/go/+/253821
Run-TryBot: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
The linker config is hashed into the buildID; however,
the GOROOT_FINAL environment variable that is
actually used when -trimpath is specified was not
reflected in that hash. This change fixes that.
Fixes#38989
Change-Id: I418a21a9f6293ca63c101d22b501dfdba8e91ac6
GitHub-Last-Rev: 4cf82920e4
GitHub-Pull-Request: golang/go#40296
Reviewed-on: https://go-review.googlesource.com/c/go/+/243557
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Trust: Bryan C. Mills <bcmills@google.com>
Set GO111MODULE=off explicitly in tests specific to GOPATH mode.
Added a go.mod file to other tests that assumed GOPATH mode.
Fixed an issue in the build metadata file generated in
modload/build.go, which did not end with a newline. This broke the
build_dash_x test, which expects to be able to run the script printed
by 'go build -x' to produce the same result. The script is broken if
the build metadata file doesn't end with a newline.
Change-Id: I59f2a492a9f5a66f6c4aa702f429909d5c5e815d
Reviewed-on: https://go-review.googlesource.com/c/go/+/255051
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
This change adds rules to find pairs of instructions that can
be combined into a single shifts. These instruction sequences
are common in array addressing within loops. Improvements can
be seen in many crypto packages and the hash packages.
These are based on the extended mnemonics found in the ISA
sections C.8.1 and C.8.2.
Some rules in PPC64.rules were moved because the ordering prevented
some matching.
The following results were generated on power9.
hash/crc32:
CRC32/poly=Koopman/size=40/align=0 195ns ± 0% 163ns ± 0% -16.41%
CRC32/poly=Koopman/size=40/align=1 200ns ± 0% 163ns ± 0% -18.50%
CRC32/poly=Koopman/size=512/align=0 1.98µs ± 0% 1.67µs ± 0% -15.46%
CRC32/poly=Koopman/size=512/align=1 1.98µs ± 0% 1.69µs ± 0% -14.80%
CRC32/poly=Koopman/size=1kB/align=0 3.90µs ± 0% 3.31µs ± 0% -15.27%
CRC32/poly=Koopman/size=1kB/align=1 3.85µs ± 0% 3.31µs ± 0% -14.15%
CRC32/poly=Koopman/size=4kB/align=0 15.3µs ± 0% 13.1µs ± 0% -14.22%
CRC32/poly=Koopman/size=4kB/align=1 15.4µs ± 0% 13.1µs ± 0% -14.79%
CRC32/poly=Koopman/size=32kB/align=0 137µs ± 0% 105µs ± 0% -23.56%
CRC32/poly=Koopman/size=32kB/align=1 137µs ± 0% 105µs ± 0% -23.53%
crypto/rc4:
RC4_128 733ns ± 0% 650ns ± 0% -11.32% (p=1.000 n=1+1)
RC4_1K 5.80µs ± 0% 5.17µs ± 0% -10.89% (p=1.000 n=1+1)
RC4_8K 45.7µs ± 0% 40.8µs ± 0% -10.73% (p=1.000 n=1+1)
crypto/sha1:
Hash8Bytes 635ns ± 0% 613ns ± 0% -3.46% (p=1.000 n=1+1)
Hash320Bytes 2.30µs ± 0% 2.18µs ± 0% -5.38% (p=1.000 n=1+1)
Hash1K 5.88µs ± 0% 5.38µs ± 0% -8.62% (p=1.000 n=1+1)
Hash8K 42.0µs ± 0% 37.9µs ± 0% -9.75% (p=1.000 n=1+1)
There are other improvements found in golang.org/x/crypto which are all in the
range of 5-15%.
Change-Id: I193471fbcf674151ffe2edab212799d9b08dfb8c
Reviewed-on: https://go-review.googlesource.com/c/go/+/252097
Trust: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
This cleans up the last of the direct obj.Prog rewriting, removing lowerJALR
and replacing it with correct handling for AJALR during instruction encoding.
Change-Id: Ieea125bde30d4c0edd2d9ed1e50160543aa8f330
Reviewed-on: https://go-review.googlesource.com/c/go/+/249077
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Joel Sing <joel@sing.id.au>
Copy the syscall wrapper from golang.org/x/sys/unix CL 255377 to provide
Flock on illumos and switch cmd/go/internal/lockedfile/internal/filelock
to use it.
Fixes#35618
Change-Id: I876a2b782329a988fa85361fb1ea58eb6f329af1
Reviewed-on: https://go-review.googlesource.com/c/go/+/255258
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
xtop holds package's top-level declaration statements, but OCLOSURE
only appears in expression contexts. xtop will instead hold the
synthetic ODCLFUNC representing OCLOSURE's function body.
This CL makes the loop consistent with the later phases that only look
for ODCLFUNC nodes in xtop.
Passes toolstash-check.
Change-Id: I852a10ef1bf75bb3351e3da0357ca8b2e26aec6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/255340
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
The existing translation assumes an in-memory return values, thus it returns
the address of the result(s). Most consumers immediately load from the
address to get the value, and in late call expansion that is the favored idiom,
and it is also the favored idiom when arguments and results use registers
instead of memory.
Change-Id: Ie0ccc70f399682a42509d847b330ef3956462d56
Reviewed-on: https://go-review.googlesource.com/c/go/+/240186
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Extend use of AuxCall
Change-Id: I68b6d9bad09506532e1415fd70d44cf6c15b4b93
Reviewed-on: https://go-review.googlesource.com/c/go/+/239081
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is prerequisite to moving call expansion later into SSA,
and probably a good idea anyway. Passes tests.
This is the first minimal CL that does a 1-for-1 substitution
of *ssa.AuxCall for *obj.LSym. Next step (next CL) is to make
this change for all calls so that additional information can
be stored in AuxCall.
Change-Id: Ia3a7715648fd9fb1a176850767a726e6f5b959eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/237680
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
"cannot assign to" compiler errors are very laconic: they never
explain why the lhs cannot be assigned to (with one exception, when
assigning to a struct field in a map).
This change makes them a little more specific, in two more cases: when
assigning to a string, or to a const; by giving a very brief reason
why the lhs cannot be assigned to.
Change-Id: I244cca7fc3c3814e00e0ccadeec62f747c293979
Reviewed-on: https://go-review.googlesource.com/c/go/+/255199
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
