This change merges unicast_posix_test.go and multicast_test.go into
listen_test.go before deflaking tests for Listen functions.
No code changes.
Change-Id: Ic4cd6531b95dfb5b6e6e254241692eca61a71e94
Reviewed-on: https://go-review.googlesource.com/9460
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change adds missing CloseRead test and Close tests on Conn,
Listener and PacketConn with various networks.
Change-Id: Iadf99eaf526a323f853d203edc7c8d0577f67972
Reviewed-on: https://go-review.googlesource.com/9469
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes an issue where Response.Write writes out a Content-Length: -1
header when the corresponding Request is a POST or PUT and the
ContentLength was not previously set.
This was encountered when using httputil.DumpResponse
to write out the response from a server that responded to a PUT
request with no Content-Length header. The dumped output is
thus invalid.
Change-Id: I52c6ae8ef3443f1f9de92aeee9f9581dabb05991
Reviewed-on: https://go-review.googlesource.com/9496
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Not only by network, transport-layer intermediaries but by
virtualization stuff in a node, it is hard to identify the root cause of
weird faults without information of packet flows after disaster
happened.
This change adds Source field to OpError to be able to represent a
5-tuple of internet transport protocols for helping dealing with
complicated systems.
Also clarifies the usage of Source and Addr fields.
Updates #4856.
Change-Id: I96a523fe391ed14406bfb21604c461d4aac2fa19
Reviewed-on: https://go-review.googlesource.com/9231
Reviewed-by: Ian Lance Taylor <iant@golang.org>
RFC 1035 3.3.14 allows a TXT record to contain one or more <character-string>s.
The current implementation returns a "no such host" error if there is more
than one <character-string> in the TXT record.
Fixes#10482
Change-Id: I0ded258005e6b7ba45f687fecd10afa2b321bb77
Reviewed-on: https://go-review.googlesource.com/8966
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
The TestAfterQueueing test is inherently flaky because it relies on
independent kernel threads being scheduled within the "delta" duration
of each other. Normally, delta is 100ms but during "short" testing,
it's reduced to 20ms.
On at least OpenBSD, the CPU scheduler operates in 10ms time slices,
so high system load (e.g., from running multiple Go unit tests in
parallel, as happens during all.bash) can occasionally cause >20ms
scheduling delays and result in test flaking. This manifests as issue
9903, which is the currently the most common OpenBSD flake.
To mitigate this delay, only reduce the delta duration to 20ms for the
first attempt during short testing. If this fails and the test is
reattempted, subsequent attempts instead use a full 100ms delta.
Fixes#9903.
Change-Id: I11bdfa939e5be915f67ffad8a8aef6ed8772159a
Reviewed-on: https://go-review.googlesource.com/9510
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Sequence of operations:
- Go code does a systemstack call
- during the systemstack call, receive a signal
- signal requests a traceback of all goroutines
The orignal G is still marked as _Grunning, so the traceback code
refuses to print its stack.
Fix by allowing traceback of Gs whose caller is on the same M as G is.
G can't be modifying its stack if that is the case.
Fixes#10546
Change-Id: I2bcea48c0197fbf78ab6fa080027cd80181083ad
Reviewed-on: https://go-review.googlesource.com/9435
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The problem is not actually specific to android/arm. Linux/ARM's
runtime.clone set the stack pointer to child_stk-4 before calling
the fn. And then when fn returns, it tries to write to 4(R13) to
provide argument for runtime.exit, which is just beyond the allocated
child stack, and thus it will corrupt the heap randomly or trigger
segfault if that memory happens to be unmapped.
While we're at here, shorten the test polling interval to 0.1s to
speed up the test (it was only checking at 1s interval, which means
the test takes at least 1s).
Fixes#10548.
Change-Id: I57cd63232022b113b6cd61e987b0684ebcce930a
Reviewed-on: https://go-review.googlesource.com/9457
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Print it out much like godoc so there isn't a single block of text.
Print the symbol before its comment and indent the comment so
individual symbols separate visually.
Buffer the output.
Add a -c option to force case-sensitive matching.
Allow two arguments, like godoc, to help disambiguate cases
where path and symbol may be confused.
Improve the documentation printed by go help doc.
Change-Id: If687aad04bbacdf7dbe4bf7636de9fe96f756fd0
Reviewed-on: https://go-review.googlesource.com/9471
Reviewed-by: Russ Cox <rsc@golang.org>
The heap statistics were only written if asked for a profile with debug > 0,
but that also prints a stack trace for each profile line, which is comparatively
much noisier. The statistics are short enough and separate enough
(they only appear at the end) and useful enough that we can print them
always.
This means that people using -test.memprofile in tests will get a memory
profile with statistics included now. Pprof won't care, but if people care to
look, the numbers will be there.
This avoids the need for hacks like using -memprofilerate=1 to find
the number of allocations.
Change-Id: I10a4f593403d0315aad11b37c6e554b734caa73f
Reviewed-on: https://go-review.googlesource.com/9491
Reviewed-by: David Chase <drchase@google.com>
Removes the unused *bufio.Reader from the object controlling the
linker's primary output.
Change-Id: If91d9f60752f3dc4b280f35d6eb441f3c47574b2
Reviewed-on: https://go-review.googlesource.com/9362
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This doesn't test much with gccgo, but at least it builds now, and the
test does, unsurprisingly, pass. A proper test would require adding
assembly files in GCC syntax for all platforms that gccgo supports,
which would be infeasible.
Also added copyright headers to the asm files.
Change-Id: Icea5af29d7d521a0681506ddb617a79705b76d33
Reviewed-on: https://go-review.googlesource.com/9417
Reviewed-by: Minux Ma <minux@golang.org>
Disable disassembly with external linking test on openbsd/arm, since this
platform does not currently support cgo/external linking.
Change-Id: I6eab6fcaac21407ce05075a4a1407fbfe0e6142b
Reviewed-on: https://go-review.googlesource.com/9481
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When reading the object files for linking, liblink takes care of
generate the data for them.
This is a port of https://golang.org/cl/3101 to Go.
Change-Id: Ie3e2d6515bd7d253a8c1e25c70ef8fed064436d8
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/8383
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There's no need to call/ret to the body implementation.
It can write the result to the right place. Just jump to
it and have it return to our caller.
Old:
call body implementation
compute result
put result in a register
return
write register to result location
return
New:
load address of result location into a register
jump to body implementation
compute result
write result to passed-in address
return
It's a bit tricky on 386 because there is no free register
with which to pass the result location. Free up a register
by keeping around blen-alen instead of both alen and blen.
Change-Id: If2cf0682a5bf1cc592bdda7c126ed4eee8944fba
Reviewed-on: https://go-review.googlesource.com/9202
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Gdb is not able to backtrace our non-standard stack frames on RISC
architectures without frame pointer.
Change-Id: Id62a566ce2d743602ded2da22ff77b9ae34bc5ae
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/9456
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
GIF's bounds.
Also change the implicit Config Width and Height to be the
Rectangle.Max, not the Dx and Dy, of the first frame's bounds. For the
case where the first frame's bounds is something like (5,5)-(8,8), the
overall width should be 8, not 3.
Change-Id: I3affc484f5e32941a36f15517a92ca8d189d9c22
Reviewed-on: https://go-review.googlesource.com/9465
Reviewed-by: Rob Pike <r@golang.org>
Also, please be informed that the Write method on both connected and
unconnected-mode sockets may return a positive number of bytes written
with timeout or use of closed network connection error.
Change-Id: I2e2e6192e29cef4e9389eb0422c605c6d12e6a3c
Reviewed-on: https://go-review.googlesource.com/9466
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This started out as trying to remove Bool2int calls, which it does a bit, but
mostly it ended up being removing the Link.Symmorestack array which seemed a
pointless bit of caching.
Change-Id: I91a51eb08cb4b08f3f9f093b575306499267b67a
Reviewed-on: https://go-review.googlesource.com/9239
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With 128KB stack reservation, on 32-bit Windows, the maximum number
threads is ~9000.
The original 65535-byte stack commit is causing problem on Windows
XP where it makes the stack reservation to be 1MB despite the fact
that the runtime specified 128KB.
While we're at here, also fix the extra spacings in the unable to
create more OS thread error message: println will insert a space
between each argument.
See #9457 for more information.
Change-Id: I3a82f7d9717d3d55211b6eb1c34b00b0eaad83ed
Reviewed-on: https://go-review.googlesource.com/2237
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Minux Ma <minux@golang.org>
In the followup changes, tests that require external facilities such as
DNS servers and RRs will move into external_test.go.
Change-Id: Ib460b0c51961159830357652dbf5430e1ba01514
Reviewed-on: https://go-review.googlesource.com/9461
Reviewed-by: Dave Cheney <dave@cheney.net>
They have to read the boolean into a register first and then do
the comparison.
Fixes#10598.
Change-Id: I2b808837a8c6393e1e0778296b6592aaab2b04bf
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/9453
Reviewed-by: Dave Cheney <dave@cheney.net>
To avoid confusion with the runtime concept of copying stack.
Change-Id: I33442377b71012c2482c2d0ddd561492c71e70d0
Reviewed-on: https://go-review.googlesource.com/8639
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>
The previous CL implemented decoding, but not encoding.
Also return the global color map (if present) for DecodeConfig.
Change-Id: I3b99c93720246010c9fe0924dc40a67875dfc852
Reviewed-on: https://go-review.googlesource.com/9389
Reviewed-by: Rob Pike <r@golang.org>
Technically you must initialize static pthread_mutex_t and
pthread_cond_t variables with the appropriate INITIALIZER macro. In
practice the default initializers are zero anyhow, but it's still good
code hygiene.
Change-Id: I517304b16c2c7943b3880855c1b47a9a506b4bdf
Reviewed-on: https://go-review.googlesource.com/9433
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Fixes#10366 (how to set custom headers)
Fixes#9836 (PATCH in PostForm)
Fixes#9276 (generating a server-side Request for testing)
Update #8991 (clarify Response.Write for now; export ReverseProxy's copy later?)
Change-Id: I95a11bf3bb3eeeeb72775b6ebfbc761641addc35
Reviewed-on: https://go-review.googlesource.com/9410
Reviewed-by: David Crawshaw <crawshaw@golang.org>
These were lost in the transition from 8a/6a to asm.
Also, in the process, discover more aliases. I'm betting the missing
ones were a casualty of the recent merge of 386 and amd64.
Update #10385.
Change-Id: I1681034b25af3ffc103f75e5fc57baca5feb3fcd
Reviewed-on: https://go-review.googlesource.com/9431
Reviewed-by: Russ Cox <rsc@golang.org>
This change corrects the serialization of asn1.Flag values, so that
when set, they serialize to an empty value, and when unset, they are
omitted. It also adds a format parameter that allows calling code
to control whether time.Time values are serialized as UTCTime or
GeneralizedTime.
Change-Id: I6d97abf009ea317338dab30c80f35a2de7e07104
Reviewed-on: https://go-review.googlesource.com/5970
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Previously, unknown critical extensions were a parse error. However, for
some cases one wishes to parse and use a certificate that may contain
these extensions. For example, when using a certificate in a TLS server:
it's the client's concern whether it understands the critical extensions
but the server still wishes to parse SNI values out of the certificate
etc.
This change moves the rejection of unknown critical extensions from
ParseCertificate to Certificate.Verify. The former will now record the
OIDs of unknown critical extensions in the Certificate and the latter
will fail to verify certificates with them. If a user of this package
wishes to handle any unknown critical extensions themselves, they can
extract the extensions from Certificate.Extensions, process them and
remove known OIDs from Certificate.UnknownCriticalExtensions.
See discussion at
https://groups.google.com/forum/#!msg/golang-nuts/IrzoZlwalTQ/qdK1k-ogeHIJ
and in the linked bug.
Fixes#10459
Change-Id: I762521a44c01160fa0901f990ba2f5d4977d7977
Reviewed-on: https://go-review.googlesource.com/9390
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
