This change will stop formatting from working on any file that does not
parse. This is a temporary fix to handle the formatting problems
mentioned here: https://github.com/Microsoft/vscode-go/issues/2410, but
is not a long-term solution.
Change-Id: Ie34b1876519832d6859db95fdcad7cc37a20b769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171019
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This also means we don't need the J2 becasue it is implied by len(Content)
Change-Id: I04e2cbaa3e1faa1e3add22ec2d478821b9062419
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170878
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
instead of driving the source pacakge directly, it indirects through the lsp
protocol (the same way check does)
We are normalizing on all the command lines doing this, so that server mode
is more viable in the future.
Change-Id: Ib5f2a059a44a5c60a53129c554e3cc14ca72c4a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170577
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a cache of undelivered diagnostics on the server-side.
If we fail to send a diagnostic once, we will retry the next time that
the server sends diagnostics.
Change-Id: I161dfad8ea1d2cfdcee933baed2d6872dc03b0c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167737
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also use it for errors that were otherwise silently dropped
This makes it much easier to debug problems.
Also added command line control over whether the rpc trace messages are printed, which allows you to read the
log, otherwise the file edit messages swamp the log.
Change-Id: I7b70fd18034a87b2964e6d6d5f6f33dcaf7d8ea8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170178
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change also fixes the corresponding code in go/packages, which was
actually not filling in the TypesSizes if the bit was set.
Change-Id: I2d5a849045768a81c94218eb41da2faec26189a3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170010
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows us to return diagnostics in the case of a file that
doesn't exist.
Change-Id: I6275c0dc9103a3f44070919937afe27c64545828
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170009
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Instead of using a simple path map we now attempt to match files with
os.SameFile with fast paths for exact path matches. This should fix issues both
with symlinked directories (the mac tmp folder) and with case sensitivity
(windows)
Change-Id: I014dd01f89d08a348e7de7697cbc3a2512a6e5b3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169699
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses go/types information to get the types for the
different symbols. It also groups the symbols according to their kinds,
though this doesn't seem to be reflected in the actual VSCode UI...
Updates golang/go#30915
Change-Id: I2caefe01f9834aaad6b9e81cd391d461405ef725
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169438
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Change span to hide its fields and have validating accessors
This catches the cases where either the offset or the position is being used
when it was not set.
It also normalizes the forms as the API now controls them, and allows us to
simplify some of the logic.
The converters are now allowed to return an error, which lets us cleanly
propagate bad cases.
The lsp was then converted to the new format, and also had some error checking
of its own added on the top.
All this allowed me to find and fix a few issues, most notably a case where the
wrong column mapper was being used during the conversion of definition results.
Change-Id: Iebdf8901e8269b28aaef60caf76574baa25c46d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167858
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL ensures that a "." inside a string literal will return an empty
completion list.
Fixesgolang/go#30477
Change-Id: I1442d0acab4c12a829047805f745c4729d69c208
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167857
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change brings back handling for circular imports, which was removed
because I originally thought that go/packages would handle that.
However, since we are type-checking from source, we still end up having
to deal with that.
Additionally, we propagate the errors of type-checking to the
diagnostics so that the user can actually see some of the problems.
Change-Id: I0139bcaae461f1bcaf95706532bc5026f2430101
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166882
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We may encounter these nil pointer if go/packages cannot find the
package of the given file, for example, when the user creates a new file
or a new package.
Change-Id: I16993017243a56332dd9f7e0aaf3c1d57f20fc3a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167462
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a Package interface to the source package, which allows
us to reduce the information cached per-package (we don't use any of the
unnecessary fields in a *go/packages.Package).
This change also adds an analysis cache for each package, which is used
to cache the results of analyses to avoid recomputation.
Change-Id: I56c6b5ed51126c27f46731c87ac4eeacc63cb81a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165750
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds an additional cache for type information, which here is
just a *packages.Package for each package. The metadata cache maintains
the import graph, which allows us to easily determine when a package X
(and therefore any other package that imports X) should be invalidated.
Additionally, rather than performing content changes as they happen, we
queue up content changes and apply them the next time that any type
information is requested.
Updates golang/go#30309
Change-Id: Iaf569f641f84ce69b0c0d5bdabbaa85635eeb8bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Also, separate type-checking logic into its own file.
go/packages returns import cycle errors anyway, so we just return them instead.
Change-Id: I1f524cdf81e1f9655c1b0afd50dd2aeaa167bb2f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165021
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds severity levels to source.Diagnostics, allowing us to
pass this information along to the LSP. This allows compiler errors to
show up in red, while vet results show up in green.
Change-Id: I2bc0b27ed6629f987c05affe00fdbe4b9bfb3b3e
Reviewed-on: https://go-review.googlesource.com/c/164299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Because diagnostics computations happen in parallel, we were getting
concurrent map writes by keeping one cache.
Change-Id: Ifa5adffe14c509168c9f8c5cb012f3fcd3a32441
Reviewed-on: https://go-review.googlesource.com/c/163161
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Like the previous change to the FIle interface, we treat Read as if it were an
accessor, we remember the content part but not the error part, and we may fill
it in asynchronously, so this change makes it explicit.
In the future we should probably trap the error in the read and push it back
through another channel though, it will be the root cause of later errors.
Change-Id: I3d374dd557178b4e8c5544813cd77f5c0faefe5b
Reviewed-on: https://go-review.googlesource.com/c/162403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
we don't really use them, only generate them in cases where the failure is way more fundamental, and then also fail
to remember them for the next call to the same accessor. Better to not have them.
Change-Id: I0e8abeda688f5cc2a932ed95a80d89225c399f93
Reviewed-on: https://go-review.googlesource.com/c/162399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Small changes to handle the last line in the diff library, LSP tests,
and diff to text edits conversion.
Fixesgolang/go#30137
Change-Id: Iff0e53a04c2dabf6f54eb7c738b4c0837f16efba
Reviewed-on: https://go-review.googlesource.com/c/162217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This changes the analysis code from that which was in unitchecker.go
to that in checker.go, so we can run actions that get facts for dependencies
concurrently.
Adds the rest of the traditional vet suite to the LSP.
TODO(matloob): test that facts are actually propagated between packages
Change-Id: I946082159777943af81bcf10e503fecc99da521e
Reviewed-on: https://go-review.googlesource.com/c/161671
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves gopls from type-checking packages using the
go/packages API to type-checking from source. This is the first step in
adding caching to gopls.
Change-Id: I2a7dcfd8c9c0bfc6c35c86eadcdc6f9ce53d9be7
Reviewed-on: https://go-review.googlesource.com/c/161497
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This starts hooking up the analysis framework into the LSP. It runs
the Tests analysis (which I think might be the only one that doesn't
need facts or results) and reports its diagnostics if there are
no parse or typecheck failures.
Next step: figure out how to pass through results.
Change-Id: I21702d1cf5d54da399df54437f556b9351caa864
Reviewed-on: https://go-review.googlesource.com/c/161358
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Rather than replacing the whole file on gofmt or goimports, use the Myers
diff algorithm to compute diffs for a file. We send those back as text
edits.
Change-Id: I4f8cce5b27d51eae1911049ea002558a84cdf1bf
Reviewed-on: https://go-review.googlesource.com/c/158579
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The source package now exposes an Identifier method that returns information
about an identifier, which can be used to implement Definition, TypeDefinition
and Hover, as well as other command line functions in a later cl.
Change-Id: I03629c2c940215b4e2c86ee45bee8a18b79ee0e1
Reviewed-on: https://go-review.googlesource.com/c/159337
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The previous change (https://go-review.googlesource.com/c/tools/+/157678) only stopped completion in comments in global scope. This change prevents completions results from being sent for comments inside of functions.
Fixesgolang/go#29370
Change-Id: I2b43ae2942c6ce7376d2a5f88c40e6ac45c2b773
GitHub-Last-Rev: bc4aac1370aa5758941cdfae63290f061a55e204
GitHub-Pull-Request: golang/tools#71
Reviewed-on: https://go-review.googlesource.com/c/158538
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Jumping to the definition of a builtin function or basic kind would
cause a nil pointer because these have no position.
Change-Id: I043a61a148757b127ff1123c8429ce23858bd13a
Reviewed-on: https://go-review.googlesource.com/c/157597
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Refactor code as a follow-up to
https://go-review.googlesource.com/c/tools/+/154742.
Also, change every instance of "source.URI()" to "fromProtocolURI", so
that we can add a better implementation of that later on (for Windows
support).
Change-Id: Ifa24ffd7e1aebf1f7d05df6f65742769ead0922f
Reviewed-on: https://go-review.googlesource.com/c/154741
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Added a View interface to the source package, which allows for reading
of other files (in the same package or in other packages). We were
already reading files in jump to definition (to handle the lack of
column information in export data), but now we can also read files in
diagnostics, which allows us to determine the end of an identifier so
that we can report ranges in diagnostic messages.
Updates golang/go#29150
Change-Id: I7958d860dea8f41f2df88a467b5e2946bba4d1c5
Reviewed-on: https://go-review.googlesource.com/c/154742
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds support for goimports as a code action that can be run
on save. However, there do appear to be issues with the propagation of
the context.Only field of the CodeActionParams, so we treat every
codeAction as an organizeImports action - this should be fixed in the
next vscode-languageclient release
(https://github.com/Microsoft/vscode-languageserver-node/issues/442).
Change-Id: I64ca0034c393762248fde6521aba86ed9d41bf70
Reviewed-on: https://go-review.googlesource.com/c/154338
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Create helper functions for the exported URI functions to test
the logic that isn't OS-specific (filepath.{To,From}Slash is the OS-specific part).
Also add helpers to determine is a file or URI path is Windows-specific.
Change-Id: I6ba5119424ad5edcd59b946276e4268b2525505f
Reviewed-on: https://go-review.googlesource.com/c/153867
Reviewed-by: Ian Cottrell <iancottrell@google.com>
URI should be started with file:/// always.
Change-Id: I123e577d421de3e85dfec00596fbdb63c2231938
Reviewed-on: https://go-review.googlesource.com/c/153618
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change separates a cache package out of the
golang.org/x/tools/internal/lsp/source package. The source package now
uses an interface instead a File struct, which will allow it be reused
more easily. The cache package contains the View and File structs now.
Change-Id: Ia2114e9dafc5214c8b21bceba3adae1c36b9799d
Reviewed-on: https://go-review.googlesource.com/c/152798
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a very simple implementation of hovering. It doesn't
show any documentation, just the object string for the given object.
Also, this change sets the prefix for composite literals, making sure we
don't insert duplicate text.
Change-Id: Ib706ec821a9e459a6c61c10f5dd28d1798944fa3
Reviewed-on: https://go-review.googlesource.com/c/152599
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
