Using offsets from Tos is cumbersome and we've had problems
in the past. Since it's only being used to grab the PID, we'll just
get that from the default TLS instead.
R=rsc, rminnich, npe
CC=golang-dev
https://golang.org/cl/6543049
various implementation of collation. The tool provides commands for soring,
regressing one implementation against another, and benchmarking.
Currently it includes collation implementations for the Go collator, ICU,
and one using Darwin's CoreFoundation framework.
To avoid building this tool in the default build, the colcmp tag has been
added to all files. This allows other tools/colcmp in this directory (e.g. it may make
sense to move maketables here) to be put in this directory as well.
R=r, rsc, mpvl
CC=golang-dev
https://golang.org/cl/6496118
Can tell this doesn't get run very often, but it is still important
for when you've broken everything else.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/6547065
This CL fixes code that incorrectly assumes that int is 32 bits wide.
Specifically, the socketpair system call expects a pointer to a pair
of int32s, not a pair of ints. Fix this inside the wrappers without
changing the APIs.
Update #2188.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/6552063
Change the grammar so that field access is a proper operator.
This introduces a new node, ChainNode, into the public (but
actually internal) API of text/template/parse. For
compatibility, we only use the new node type for the specific
construct, which was not parseable before. Therefore this
should be backward-compatible.
Before, .X.Y was a token in the lexer; this CL breaks it out
into .Y applied to .X. But for compatibility we mush them
back together before delivering. One day we might remove
that hack; it's the simple TODO in parse.go/operand.
This change also provides grammatical distinction between
f
and
(f)
which might permit function values later, but not now.
Fixes#3999.
R=golang-dev, dsymonds, gri, rsc, mikesamuel
CC=golang-dev
https://golang.org/cl/6494119
The code was trying to interpret a uint32 n as a signed quantity
and then store it in an int. For this, int(n) currently works, but when
int becomes 64 bits one must write int(int32(n)) instead, to get
the 32-bit sign extension.
Update #2188.
R=golang-dev, nigeltao
CC=golang-dev
https://golang.org/cl/6551068
After each line, ast.Print would do a zero-length write,
which would hit the boundary condition on Plan 9 when
reading over pipes (since message boundaries are
preserved). This change makes sure we only do positive-
length writes.
R=rsc, rminnich, dave, r
CC=golang-dev
https://golang.org/cl/6558046
This was misleading and often confusing for new users.
Leaving the actual weekly release history page for historical reference.
R=golang-dev, rsc, adg
CC=golang-dev
https://golang.org/cl/6555053
Today, if run.go doesn't understand a test header line it just ignores
the test, making it too easy to write or edit tests that are not actually
being run.
- expand errorcheck to accept flags, so that bounds.go and escape*.go can run.
- create a whitelist of skippable tests in run.go; skipping others is an error.
- mark all skipped tests at top of file.
Update #4139.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/6549054
Revision 63f7abcae015 introduced a bug caused by
code assuming registers started at X5, not X0.
Fixes#4138.
R=rsc
CC=golang-dev, remy
https://golang.org/cl/6558043
When I was a lad (and well past), users were in /usr;
now they're somewhere else, I'm told.
Kids today.
Fixes#4122.
R=golang-dev, dsymonds, rsc
CC=golang-dev
https://golang.org/cl/6552060
The width was not being set on the address, which meant
that the optimizer could not find variables that overlapped
with it and mark them as having had their address taken.
This let to the compiler believing variables had been set
but never used and then optimizing away the set.
Fixes#4129.
R=ken2
CC=golang-dev
https://golang.org/cl/6552059
*** There is an API change here: the introduction of the
LatinOffset int in the RangeTable struct. ***
* Avoid checking Latin range multiple times for non-Latin runes.
* Use linear search when it is faster than binary search.
go test -calibrate runs the calibration for where the linear/binary
crossover should be.
benchmark old MB/s new MB/s speedup
BenchmarkFields 36.27 41.43 1.14x
BenchmarkFieldsFunc 36.23 41.38 1.14x
The speedup here is evenly split between the linear scans
and the LatinOffset change. Both are about 1.07x.
R=r
CC=bradfitz, gobot, golang-dev
https://golang.org/cl/6526048
OpenBSD now requires ELF binaries to have a PT_NOTE that identifies
it as an OpenBSD binary. Refactor the existing NetBSD ELF signature
code and implement support for OpenBSD ELF signatures.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6489131
Previously we tried to parse email constraints as the maximum base
distance (which is unused and must be omitted according to RFC 5280)
because they share the same tag number. Rather than complicate the
code further, this CL just ignores the unused values.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/6552044
Always process the DWARF info, even when the const value is determined
using the debug data block. This ensures that the injected enum is
removed and future loads of the same constant do not trigger
inconsistent definitions.
Add tests for issues 2470 and 4054.
Fixes#4054.
R=golang-dev, fullung, dave, rsc, minux.ma
CC=golang-dev
https://golang.org/cl/6501101
In a range loop, the presence of a value implies the presence of a key.
However, the presence of a value as an *ast.Ident does not imply that
the key is also an *ast.Ident, thus leading to a panic any time the
two argument form is used where the key is not an identifier.
R=golang-dev, adg, r
CC=golang-dev
https://golang.org/cl/6540045
Previously, an import block such as
import (
"net"
"stack"
)
would not permit ":Drop stack" to work because we were aborting
the scan early, which is only correct when Import is in operation.
R=golang-dev, franciscossouza
CC=golang-dev
https://golang.org/cl/6532053
(see also issue 3961).
hexdump -c testdata/crlf.input
0000000 / * \r \n \t S o u r c e c o n t
0000010 a i n i n g C R / L F l i n
0000020 e e n d i n g s . \r \n \t T h e
0000030 g o f m t ' e d o u t p u t
0000040 m u s t o n l y h a v e
0000050 L F \r \n \t l i n e e n d i n g
0000060 s . \r \n * / \r \n p a c k a g e
0000070 m a i n \r \n \r \n f u n c m a i
0000080 n ( ) { \r \n \t / / l i n e
0000090 c o m m e n t \r \n \t p r i n t l
00000a0 n ( " h e l l o , w o r l d !
00000b0 " ) / / a n o t h e r l i
00000c0 n e c o m m e n t \r \n \t p r i
00000d0 n t l n ( ) \r \n } \r \n
00000db
hexdump -c testdata/crlf.golden
0000000 / * \n \t S o u r c e c o n t a
0000010 i n i n g C R / L F l i n e
0000020 e n d i n g s . \n \t T h e g
0000030 o f m t ' e d o u t p u t m
0000040 u s t o n l y h a v e L F
0000050 \n \t l i n e e n d i n g s . \n
0000060 * / \n p a c k a g e m a i n \n
0000070 \n f u n c m a i n ( ) { \n \t
0000080 / / l i n e c o m m e n t \n
0000090 \t p r i n t l n ( " h e l l o ,
00000a0 w o r l d ! " ) / / a n o
00000b0 t h e r l i n e c o m m e n
00000c0 t \n \t p r i n t l n ( ) \n } \n
00000cf
R=rsc
CC=golang-dev
https://golang.org/cl/6526052
we need to restore %PATH% before calling "dist banner", so that
it could suggest the user to add %GOROOT%/bin to %PATH% if necessary.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/6525049
use a function to get stdout and stderr, instead of depending
on a specific libc implementation.
also make test/run.go replace \r\n by \n before comparing
output.
Fixes#2121.
Part of issue 1741.
R=alex.brainman, rsc, r, remyoudompheng
CC=golang-dev
https://golang.org/cl/5847068
We use pkg path instead of file name (which contains $WORK) in section symbols names.
R=golang-dev, fullung, rsc, iant
CC=golang-dev
https://golang.org/cl/6445085
