This directory is processed by mkbuiltin.go and generates builtin.go.
It should be named builtin too, not builtins, both for consistency
and because file and directory names in general are singular unless
forced otherwise.
Commented on CL 6233 too.
Change-Id: Ic5d3671443ae9292b69fda118f61a11c88d823fa
Reviewed-on: https://go-review.googlesource.com/7660
Reviewed-by: Minux Ma <minux@golang.org>
- avoid copy in range ytab
- add fast path to prefixof
Change-Id: I88aa9d91a0abe80d253f7c3bca950b4613297499
Reviewed-on: https://go-review.googlesource.com/7628
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
These were introduced during C -> Go translation when the loop increment
contained multiple statements.
Change-Id: Ic8abd8dcb3308851a1f7024de00711f0f984e684
Reviewed-on: https://go-review.googlesource.com/7627
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
Substituting in multiple passes meant walking the type
multiple times, and worse, if a complex type was substituted
in an early pass, later passes would follow it, possibly recursively,
until hitting the depth 10 limit.
Change-Id: Ie61d6ec08438e297baabe932afe33d08f358e55f
Reviewed-on: https://go-review.googlesource.com/7625
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
In addition to possibly being clearer code,
this replaces an O(n) lookup with an O(log n) lookup.
Change-Id: I0a574c536a965a87f7ad6dcdcc30f737bc771cd5
Reviewed-on: https://go-review.googlesource.com/7623
Reviewed-by: Rob Pike <r@golang.org>
Only internal linking without cgo is supported for now.
Change-Id: I91eb1572c1ccc805db62fc4c29080df98797d51a
Reviewed-on: https://go-review.googlesource.com/7048
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
ARM64 (ARMv8) has 32 general purpose, 64-bit integer registers
(R0-R31), 32 64-bit scalar floating point registers (F0-F31), and
32 128-bit vector registers (unused, V0-V31).
R31 is either the stack pointer (RSP), or the zero register (ZR),
depending on the instruction. Note the distinction between the
hardware stack pointer, RSP, and the virtual stack pointer SP.
The (hardware) stack pointer must be 16-byte aligned at all times;
the RSP register itself must be aligned, offset(RSP) only has to
have natural alignment.
Instructions are fixed-width, and are 32-bit wide. ARM64 supports
ARMv7 too (32-bit ARM), but not in the same process. In general,
there is not much in common between 32-bit ARM and ARM64, it's a
new architecture.
All implementations have floating point instructions.
This change adds a Prog.To3 field analogous to Prog.To. It is used
by exclusive load/store instructions such as STLXR which read from
one register, and write to both a register and a memory address.
STLXRW R1, (R0), R3
This will store the word contained in R1 to the memory address
pointed by R0. R3 will be updated with the status result of the
store. It is used to implement atomic operations.
No other changes are made to the portable Prog and Addr structures.
Change-Id: Ie839029aa5265bbad35769d9689eca11e1c48c47
Reviewed-on: https://go-review.googlesource.com/7046
Reviewed-by: Russ Cox <rsc@golang.org>
Just little bits and pieces I noticed were unused in passing, and
some more found with https://github.com/opennota/check.
Change-Id: I199fecdbf8dc2ff9076cf4ea81395275c7f171c3
Reviewed-on: https://go-review.googlesource.com/7033
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I3096a7497955bc475739739ee23be387e9162867
Reviewed-on: https://go-review.googlesource.com/7210
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
namebuf was a global char buffer in the C version of gc, which was
useful for providing common storage for constructing symbol and file
names. However, now that it's just a global Go string and the string
data is dynamically allocated anyway, it doesn't serve any purpose
except to force extra write barriers everytime it's assigned to.
Also, introduce Lookupf(fmt, args...) as shorthand for
Lookup(fmt.Sprintf(fmt, args...)), which was a very common pattern for
using namebuf.
Passes "go build -toolexec 'toolstash -cmp' -a std".
Notably, this CL shrinks 6g's text section by ~15kB:
$ size toolstash/6g tool/linux_amd64/6g
text data bss dec hex filename
4600805 605968 342988 5549761 54aec1 toolstash/6g
4585547 605968 342956 5534471 547307 tool/linux_amd64/6g
Change-Id: I98abb44fc7f43a2e2e48425cc9f215cd0be37442
Reviewed-on: https://go-review.googlesource.com/7080
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The argument is never consulted apart from passing it to recursive
calls. So delete it.
Change-Id: Ia15eefb6385b3c99ea4def88f564f4e5a94c68ab
Reviewed-on: https://go-review.googlesource.com/7032
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Somehow, terribly embarrassingly, I lost part of the "re-enable
-shared on amd64" patch when rebasing before it got submitted.
This restores it and also fixes the addend to be the necessary -4.
Now updated so that Git will not put the new case into the wrong
switch.
Change-Id: I1d628232771a6d6ce6d085adf379f94a377822c5
Reviewed-on: https://go-review.googlesource.com/7126
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The conversion of this logic from C introduced a few subtle behavior
changes. E.g., assigning "name := data[p0:]" and then "name =
name[:p1-p0]" actually caused name to span the vast majority of the
package data, as at the time of the second statement p0 points just
after the package name and p1 points to the end of the package data.
Similarly, the logic for advancing past the newline at the end of the
package line changed slightly: for a "package foo safe" line, the new
code would only advance up to the newline, but not past. (Albeit, in
practice this doesn't matter: newlines in package data are harmless.)
Lastly, "data[p0]" was incorrectly written as "data[0]" a few times.
Change-Id: I49017e16ba33a627f773532b418cbf85a84f2b4b
Reviewed-on: https://go-review.googlesource.com/7000
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Everything has moved to Go, but comments still refer to .c/.h files.
Fix all of those up, at least for these three directories.
Fixes#10138
Change-Id: Ie5efe89b247841e0b3f82aac5256b2c606ef67dc
Reviewed-on: https://go-review.googlesource.com/7431
Reviewed-by: Russ Cox <rsc@golang.org>
Add cmd/internal/obj/stringer.go to do the generation and update
the architecture packages to use it to maintain the Anames tables.
Change-Id: I9c6d4def1bf21624668396d70c17973d0db11fbc
Reviewed-on: https://go-review.googlesource.com/7430
Reviewed-by: Russ Cox <rsc@golang.org>
More cleanups to gc.Node
- make Node.Local a boolean
- make Type.Local a boolean
- reduce the size of Node.Esc to a uint8
Reducing the size of Node.Esc shaves ~45mb off the RSS compiling cmd/internal/gc on amd64
before:
Maximum resident set size (kbytes): 659496
after:
Maximum resident set size (kbytes): 612196
- declare gc.Funcdepth as int32
- declare Node.Funcdepth as int32
In both cases, these were previously machine specific int types. This doesn't result in
any memory saving at the moment due to struct padding.
Change-Id: Iabef8da15e962fe8b79d7fd3d402fb26ce7ec31c
Reviewed-on: https://go-review.googlesource.com/7261
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Convert Node.Isddd to a boolean and simplify usage.
- Node.Isddd converted to bool
- Type.Isddd converted to bool
- mkinlcall converted to take isddd as a bool
- typecheckaste converted to take isddd as a bool
- ascompatte converted to take isddd as a bool
Change-Id: I52586145619c44182bb0c2c5d80a0a3fe3e50a07
Reviewed-on: https://go-review.googlesource.com/7172
Reviewed-by: Keith Randall <khr@golang.org>
More Node cleanups, these ones touch go.y.
- convert Node.Implicit to bool
- convert Node.Used to bool
Change-Id: I85c7ff9e66cee7122b560adedc995166c874f2f2
Reviewed-on: https://go-review.googlesource.com/7124
Reviewed-by: Keith Randall <khr@golang.org>
Fix the build.
This reverts commit e73981512f.
Change-Id: I979e138991c06b3295be08212d3ce80b30c2381b
Reviewed-on: https://go-review.googlesource.com/7160
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>
Somehow, terribly embarrassingly, I lost part of the "re-enable
-shared on amd64" patch when rebasing before it got submitted.
This restores it and also fixes the addend to be the necessary -4.
Change-Id: If71a09121d911a863bc07f1828ef76e3a54c1074
Reviewed-on: https://go-review.googlesource.com/6802
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
some x86 instructions (e.g. PINSRW) might store memory address in Prog.From3,
so we must also rewrite Prog.From3 on nacl.
Change-Id: I2a0da0f692ba321eba17fbc454d68aaafa133515
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/7074
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
- make paramoutheap return a bool
- convert Node.Assigned to a bool
- convert Node.Captured to a bool
- convert Node.Byval to a bool
- convert Node.Dupok to a bool
- convert Node.Wrapper to a bool
- convert Node.Reslice to a bool
Change-Id: I5b57c019f936c31d53db4db14459fb2b0aa72305
Reviewed-on: https://go-review.googlesource.com/7030
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
Node.Addrtaken is treated as a bool, so make it a bool.
I'll start to batch these changes if they are simple.
Change-Id: I02a3d1131efc4e12b78b83372c1b50f8b160c194
Reviewed-on: https://go-review.googlesource.com/6911
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Node.Hasbreak was treated like a bool, so declare it as bool.
Change-Id: Ied238356dce4da896834bd1412cc21ea56d35e1d
Reviewed-on: https://go-review.googlesource.com/6807
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Convert Node.Readonly to a bool.
Change-Id: Ide9f6f657f498d70d7b9544a38046325d7c82dc8
Reviewed-on: https://go-review.googlesource.com/6809
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Node.Builtin was occasionally set to 1, but never read.
Change-Id: Ia8a76bccc79b0f211296d50bd419860b13077ba5
Reviewed-on: https://go-review.googlesource.com/6808
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Note: for simplicity, this CL changes the identifiers assigned to
gclocals.* objects; e.g., on amd64, gclocals.ABCDEFGHIJKLMNOP is now
gclocals.HGFEDCBAPONMLKJI. However, since Go requires all packages to
be built with the same toolchain version anyway, this should be a
non-issue.
Similarly, type hashes change somewhat, but don't seem to be exposed
to users in any detectable manner.
Change-Id: Iadb3bce472af9b022b88d52b3c4c5e4113cda330
Reviewed-on: https://go-review.googlesource.com/6232
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This was inserted by c2go to turn each enum { ... } into one const ( ... ) block,
but it is fragile and was never intended as a long-term thing.
Change-Id: I8de8e0984b130456da70e4d59891276dfef7ac27
Reviewed-on: https://go-review.googlesource.com/6932
Reviewed-by: Rob Pike <r@golang.org>
It appears that c2go dropped comments inside struct { ... } and enum { ... }.
Restore them.
Identified missing comments by checking for comments present
in the C code but not the Go code, made a list, and then reapplied
with some mechanical help.
Missing comment finder: http://play.golang.org/p/g6qNUAo1Y0
Change-Id: I323ab45c7ef9d51e28eab3b699eb14bee1eef66b
Reviewed-on: https://go-review.googlesource.com/6899
Reviewed-by: Rob Pike <r@golang.org>
Minor comments added. More to come.
Change-Id: I97511db54d59e1009ef934da38f306a2dc83a6e9
Reviewed-on: https://go-review.googlesource.com/6898
Reviewed-by: Rob Pike <r@golang.org>
Previously, gc would compile code like
func foo() { ... }
var bar = foo
by emitting a static closure to wrap "foo", but then emitting runtime
initialization code to assign the closure to "bar". This CL changes
gc to instead statically initialize "bar".
Notably, this change shrinks the "go" tool's text segment by ~7.4kB on
linux/amd64 while only increasing the data segment by ~100B:
text data bss dec hex filename
7237819 122412 215616 7575847 739927 go.before
7230398 122540 215232 7568170 737b2a go.after
Fixes issue #10081.
Change-Id: If5e26cf46b323393ba6f2199a82a06e9e4baf411
Reviewed-on: https://go-review.googlesource.com/6880
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Remove the per-achitecture formatter for Prog and replace it with
a global String method. Clean up and regularize the output. Update
tests affected by the format; some tests are made correct now when
they were broken before (and known to be).
Also, related: Change the encoding of the (R1+R2) syntax on ppc64
to be equivalent to (R1)(R2*1), which means it needs no special
handling.
Delete the now unused STRINGSZ constant.
Change-Id: I7f6654d11f80065f3914a3f19353f2f12edfe310
Reviewed-on: https://go-review.googlesource.com/6931
Reviewed-by: Russ Cox <rsc@golang.org>
This was in i386 but not in x86 and was missed during the merge.
Needed for linux/386.
Change-Id: Ia6e495c044f53bcb98f3bb03e20d8f6d35a8f8ff
Reviewed-on: https://go-review.googlesource.com/6902
Reviewed-by: Rob Pike <r@golang.org>
Now unused.
Change-Id: I0ba27e58721ad66cc3068346d6d31ba0ac37ad64
Reviewed-on: https://go-review.googlesource.com/6893
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
(Because that's what the assembly files actually say - no $ on the constant.)
Change-Id: Idb774cdca0e089c4ac24ab665e23290bf7b565bf
Reviewed-on: https://go-review.googlesource.com/6895
Reviewed-by: Rob Pike <r@golang.org>
Nothing uses it, nothing should start using it.
Stop leaving plausible-looking values there.
It would be nice to remove entirely, but that would
require a new version number for the object file format,
in order not to break external readers like debug/gosym.
It's easier to leave and poison.
I came across an old mail thread suggesting we start using it
to speed up tracebacks. I want to make sure that doesn't happen.
(The values there were never quite right, and the number is
fundamentally PC-specific anyway.)
Change-Id: Iaf38e8a6b523cbae30b69c28497c4588ef397519
Reviewed-on: https://go-review.googlesource.com/6890
Reviewed-by: Minux Ma <minux@golang.org>
Make cmd/internal/obj/x86 support 32-bit mode and use
instead of cmd/internal/obj/i386. Delete cmd/internal/obj/i386.
Clean up encoding of PINSRQ, CMPSD to use explicit third arg
instead of jamming it into an unused slot of a different arg.
Also fix bug in old6a, which declared the wrong grammar.
The accepted (and encoded) arguments to CMPSD etc are mem,reg not reg,mem.
Code that did try to use mem,reg before would be rejected by liblink,
so only reg,reg ever worked, so existing code is not affected.
After this change, code can use mem,reg successfully.
The real bug here is that the encoding tables inverted the argument
order, making the comparisons all backward from what they say on the page.
It's too late to swap them, though: people have already written code that
expects the inverted comparisons (like in package math, and likely externally).
The best we can do is make the argument that should and can take a
memory operand accept it.
Bit-for-bit compatibility checked against tree without this CL.
Change-Id: Ife5685bc98c95001f64407f35066b34b4dae11c1
Reviewed-on: https://go-review.googlesource.com/6810
Reviewed-by: Rob Pike <r@golang.org>
Add unused (but initialized) from3 field to ytab, f3t to movtab.
Remove level of indentation in movtab processing.
Change-Id: I8475988f46b541ecaccf8d34608da8bef7d12e24
Reviewed-on: https://go-review.googlesource.com/6892
Reviewed-by: Rob Pike <r@golang.org>
