Now only cmd/asm and cmd/compile depend on cmd/internal/obj. Changing
the assembler backends no longer requires reinstalling cmd/link or
cmd/addr2line.
There's also now one canonical definition of the object file format in
cmd/internal/objabi/doc.go, with a warning to update all three
implementations.
objabi is still something of a grab bag of unrelated code (e.g., flag
and environment variable handling probably belong in a separate "tool"
package), but this is still progress.
Fixes#15165.
Fixes#20026.
Change-Id: Ic4b92fac7d0d35438e0d20c9579aad4085c5534c
Reviewed-on: https://go-review.googlesource.com/40972
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Automated refactoring using github.com/mdempsky/unbed (to rewrite
s.Foo to s.FuncInfo.Foo) and then gorename (to rename the FuncInfo
field to just Func).
Passes toolstash-check -all.
Change-Id: I802c07a1239e0efea058a91a87c5efe12170083a
Reviewed-on: https://go-review.googlesource.com/40670
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
While debugging a recent regression it was discovered that
the assembler for ppc64x was not always generating the correct
instruction for DS form loads and stores. When an instruction
is DS form then the offset must be a multiple of 4, and if it
isn't then bits outside the offset field were being incorrectly
set resulting in unexpected and incorrect instructions.
This change adds a check to determine when the opcode is DS form
and then verifies that the offset is a multiple of 4 before
generating the instruction, otherwise logs an error.
This also changes a few asm files that were using unaligned offsets
for DS form loads and stores. In the runtime package these were
instructions intended to cause a crash so using aligned or unaligned
offsets doesn't change that behavior.
Change-Id: Ie3a7e1e65dcc9933b54de7a46a054da8459cb56f
Reviewed-on: https://go-review.googlesource.com/40476
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
The instructions allow moves between floating point and general
purpose registers without any conversion taking place.
Change-Id: I82c6f3ad9c841a83783b5be80dcf5cd538ff49e6
Reviewed-on: https://go-review.googlesource.com/38777
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Prior to this CL, flags such as NOSPLIT
on ATEXT Progs were stored in From3.Offset.
Some but not all of those flags were also
duplicated into From.Sym.Attribute.
This CL migrates all of those flags into
From.Sym.Attribute and stops creating a From3.
A side-effect of this is that printing an
ATEXT Prog can no longer simply dump From3.Offset.
That's kind of good, since the raw flag value
wasn't very informative anyway, but it did
necessitate a bunch of updates to the cmd/asm tests.
The reason I'm doing this work now is that
avoiding storing flags in both From.Sym and From3.Offset
simplifies some other changes to fix the data
race first described in CL 40254.
This CL almost passes toolstash-check -all.
The only changes are in cases where the assembler
has decided that a function's flags may be altered,
e.g. to make a function with no calls in it NOSPLIT.
Prior to this CL, that information was not printed.
Sample before:
"".Ctz64 t=1 size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Sample after:
"".Ctz64 t=1 nosplit size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), NOSPLIT, $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Observe the additional "nosplit" in the first line
and the additional "NOSPLIT" in the second line.
Updates #15756
Change-Id: I5c59bd8f3bdc7c780361f801d94a261f0aef3d13
Reviewed-on: https://go-review.googlesource.com/40495
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The hardware divider is an optional component of ARMv7. This patch
detects whether it is available in runtime and use it or not.
1. The hardware divider is detected at startup and a flag is set/clear
according to a perticular bit of runtime.hwcap.
2. Each call of runtime.udiv will check this flag and decide if
use the hardware division instruction.
A rough test shows the performance improves 40-50% for ARMv7. And
the compatibility of ARMv5/v6 is not broken.
fixes#19118
Change-Id: Ic586bc9659ebc169553ca2004d2bdb721df823ac
Reviewed-on: https://go-review.googlesource.com/37496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This makes the core Flushplist loop clearer.
We may also want to move the Sym initialization
much earlier in the compiler (see discussion on
CL 40254), for which this paves the way.
While we're here, eliminate package log in favor of ctxt.Diag.
Passes toolstash-check -all.
Updates #15756
Change-Id: Ieaf848d196764a5aa82578b689af7bc6638c385a
Reviewed-on: https://go-review.googlesource.com/40313
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
CL 38662 changed the x86 assembler to be eagerly
initialized, for a concurrent backend.
This CL puts in place a proper mechanism for doing so,
and switches all architectures to use it.
Passes toolstash-check -all.
Updates #15756
Change-Id: Id2aa527d3a8259c95797d63a2f0d1123e3ca2a1c
Reviewed-on: https://go-review.googlesource.com/39917
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was simply a wrapper around Link.Lookup.
Unwrap everything.
CL prepared using eg with template:
package p
import "cmd/internal/obj"
func before(ctxt *obj.Link, name string, version int) *obj.LSym {
return obj.Linklookup(ctxt, name, version)
}
func after(ctxt *obj.Link, name string, version int) *obj.LSym {
return ctxt.Lookup(name, version)
}
Then one comment in cmd/asm/internal/asm/parse.go
was manually updated (and gofmt'ed!),
and func Linklookup deleted.
Passes toolstash-check (as a sanity measure).
Change-Id: Icc4d56b0b2b5c8888d3184c1898c48359ea1e638
Reviewed-on: https://go-review.googlesource.com/39715
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When a constant is both MOVCON (can fit into a MOV instruction)
and BITCON (can fit into a logical instruction), the assembler
chooses to use the MOVCON encoding, which is actually longer for
logical instructions. We add MBCON rules explicitly to make sure
it uses the BITCON encoding.
Updates #19857.
Change-Id: Ib9881be363cbc491ac2a0792b36b87e74eff34a8
Reviewed-on: https://go-review.googlesource.com/39652
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Rather than using arm64.Rconv directly in the archArm64 constructor
use the generic obj.Rconv helper. This removes the only use of
arm64.Rconv outside the arm64 package itself.
Change-Id: I99e9e7156b52cd26dc134f610f764ec794264e2c
Reviewed-on: https://go-review.googlesource.com/38756
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
REV/REV16/REVSH were introduced in ARMv6, they offered more efficient
byte reverse operatons.
MMUL/MMULA/MMULS were introduced in ARMv6, they simplified
a serial of mul->shift->add/sub operations into a single instruction.
RBIT was introduced in ARMv7, it inversed a 32-bit word's bit order.
MULS was introduced in ARMv7, it corresponded to MULA.
MULBB/MULABB were introduced in ARMv5TE, they performed 16-bit
multiplication (and accumulation).
Change-Id: I6365b17b3c4eaf382a657c210bb0094b423b11b8
Reviewed-on: https://go-review.googlesource.com/35565
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Prior to this CL, instinit was called as needed.
This does not work well in a concurrent backend.
Initialization is very cheap; do it on startup instead.
Passes toolstash-check -all.
No compiler performance impact.
Updates #15756
Change-Id: Ifa5e82e8abf4504435e1b28766f5703a0555f42d
Reviewed-on: https://go-review.googlesource.com/38662
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As #19357 reported,
TST has 3 different sub forms
TST $imme, Rx
TST Ry << imme, Rx
TST Ry << Rz, Rx
just like CMP/CMN/TEQ has. But current arm assembler assembles all TST
instructions wrongly. This patch fixes it and adds more tests.
Fixes#19357
Change-Id: Iafedccfaab2cbb2631e7acf259837a782e2e8e2f
Reviewed-on: https://go-review.googlesource.com/37662
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Link.Plists never contained more than one Plist, and sometimes none.
Passing around the Plist being worked on is straightforward and makes
the data flow easier to follow.
Change-Id: I79cb30cb2bd3d319fdbb1dfa5d35b27fcb748e5c
Reviewed-on: https://go-review.googlesource.com/37169
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The s390x port was based on the ppc64 port and, because of the way the
port was done, inherited some instructions from it. ppc64 supports
3-operand (4-operand for FMADD etc.) floating point instructions
but s390x doesn't (the destination register is always an input) and
so these were emulated.
There is a bug in the emulation of FMADD whereby if the destination
register is also a source for the multiplication it will be
clobbered. This doesn't break any assembly code in the std lib but
could affect future work.
To fix this I have gone through the floating point instructions and
removed all unnecessary 3-/4-operand emulation. The compiler doesn't
need it and assembly writers don't need it, it's just a source of
bugs.
I've also deleted the FNMADD family of emulated instructions. They
aren't used anywhere.
Change-Id: Ic07cedcf141a6a3b43a0c84895460f6cfbf56c04
Reviewed-on: https://go-review.googlesource.com/33350
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change adds instructions from ISA 2.05, 2.06 and 2.07 that are frequently
used in assembly optimizations for ppc64.
It also fixes two problems:
* the implementation of RLDICR[CC]/RLDICL[CC] did not consider all possible
cases for the bit mask.
* removed two non-existing instructions that were added by mistake in the VMX
implementation (VORL/VANDL).
Change-Id: Iaef4e5c6a5240c2156c6c0f28ad3bcd8780e9830
Reviewed-on: https://go-review.googlesource.com/36230
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Also adds tests for all missing VRI-a instructions (which may be
affected by this change).
Fixes#18749.
Change-Id: I48249dda626f32555da9ab58659e2e140de6504a
Reviewed-on: https://go-review.googlesource.com/35561
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
XPos is a compact (8 instead of 16 bytes on a 64bit machine) source
position representation. There is a 1:1 correspondence between each
XPos and each regular Pos, translated via a global table.
In some sense this brings back the LineHist, though positions can
track line and column information; there is a O(1) translation
between the representations (no binary search), and the translation
is factored out.
The size increase with the prior change is brought down again and
the compiler speed is in line with the master repo (measured on
the same "quiet" machine as for prior change):
name old time/op new time/op delta
Template 256ms ± 1% 262ms ± 2% ~ (p=0.063 n=5+4)
Unicode 132ms ± 1% 135ms ± 2% ~ (p=0.063 n=5+4)
GoTypes 891ms ± 1% 871ms ± 1% -2.28% (p=0.016 n=5+4)
Compiler 3.84s ± 2% 3.89s ± 2% ~ (p=0.413 n=5+4)
MakeBash 47.1s ± 1% 46.2s ± 2% ~ (p=0.095 n=5+5)
name old user-ns/op new user-ns/op delta
Template 309M ± 1% 314M ± 2% ~ (p=0.111 n=5+4)
Unicode 165M ± 1% 172M ± 9% ~ (p=0.151 n=5+5)
GoTypes 1.14G ± 2% 1.12G ± 1% ~ (p=0.063 n=5+4)
Compiler 5.00G ± 1% 4.96G ± 1% ~ (p=0.286 n=5+4)
Change-Id: Icc570cc60ab014d8d9af6976f1f961ab8828cc47
Reviewed-on: https://go-review.googlesource.com/34506
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This replaces the src.Pos LineHist-based position tracking with
the syntax.Pos implementation and updates all uses.
The LineHist table is not used anymore - the respective code is still
there but should be removed eventually. CL forthcoming.
Passes toolstash -cmp when comparing to the master repo (with the
exception of a couple of swapped assembly instructions, likely due
to different instruction scheduling because the line-based sorting
has changed; though this is won't affect correctness).
The sizes of various important compiler data structures have increased
significantly (see the various sizes_test.go files); this is probably
the reason for an increase of compilation times (to be addressed). Here
are the results of compilebench -count 5, run on a "quiet" machine (no
apps running besides a terminal):
name old time/op new time/op delta
Template 256ms ± 1% 280ms ±15% +9.54% (p=0.008 n=5+5)
Unicode 132ms ± 1% 132ms ± 1% ~ (p=0.690 n=5+5)
GoTypes 891ms ± 1% 917ms ± 2% +2.88% (p=0.008 n=5+5)
Compiler 3.84s ± 2% 3.99s ± 2% +3.95% (p=0.016 n=5+5)
MakeBash 47.1s ± 1% 47.2s ± 2% ~ (p=0.841 n=5+5)
name old user-ns/op new user-ns/op delta
Template 309M ± 1% 326M ± 2% +5.18% (p=0.008 n=5+5)
Unicode 165M ± 1% 168M ± 4% ~ (p=0.421 n=5+5)
GoTypes 1.14G ± 2% 1.18G ± 1% +3.47% (p=0.008 n=5+5)
Compiler 5.00G ± 1% 5.16G ± 1% +3.12% (p=0.008 n=5+5)
Change-Id: I241c4246cdff627d7ecb95cac23060b38f9775ec
Reviewed-on: https://go-review.googlesource.com/34273
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This will let us use the src.Pos struct to thread inlining
information through to obj.
Change-Id: I96a16d3531167396988df66ae70f0b729049cc82
Reviewed-on: https://go-review.googlesource.com/34195
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The element index needs to be placed in From3. Before this CL it
was impossible to write a VSTE instruction that could be
successfully parsed, so this won't affect existing assembly code.
Fixes#18075.
Change-Id: I5b71be4c6632b1d5a30820a529122f96fd1bc864
Reviewed-on: https://go-review.googlesource.com/33584
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The current implementation for Power architecture does not include the vector
scalar (VSX) registers. This adds the 63 VSX registers and the most commonly
used instructions: load/store VSX vector/scalar, move to/from VSR, logical
operations, select, merge, splat, permute, shift, FP-FP conversion, FP-integer
conversion and integer-FP conversion.
Change-Id: I0f7572d2359fe7f3ea0124a1eb1b0bebab33649e
Reviewed-on: https://go-review.googlesource.com/30510
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some original shift opcodes for ppc64x expected an operand to be
a mask instead of a shift count, preventing some valid shift counts
from being written.
This adds new opcodes for shifts where needed, using mnemonics that
match the ppc64 asm and allowing the assembler to accept the full set
of valid shift counts.
Fixes#15016
Change-Id: Id573489f852038d06def279c13fd0523736878a7
Reviewed-on: https://go-review.googlesource.com/31853
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
The m5 and m6 fields were the wrong way round.
Fixes#17444.
Change-Id: I10297064f2cd09d037eac581c96a011358f70aae
Reviewed-on: https://go-review.googlesource.com/31130
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Adds the new canMergeLoad function which can be used by rules to
decide whether a load can be merged into an operation. The function
ensures that the merge will not reorder the load relative to memory
operations (for example, stores) in such a way that the block can no
longer be scheduled.
This new function enables transformations such as:
MOVD 0(R1), R2
ADD R2, R3
to:
ADD 0(R1), R3
The two-operand form of the following instructions can now read a
single memory operand:
- ADD
- ADDC
- ADDW
- MULLD
- MULLW
- SUB
- SUBC
- SUBE
- SUBW
- AND
- ANDW
- OR
- ORW
- XOR
- XORW
Improves SHA3 performance by 6-8%.
Updates #15054.
Change-Id: Ibcb9122126cd1a26f2c01c0dfdbb42fe5e7b5b94
Reviewed-on: https://go-review.googlesource.com/29272
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TESTB was implemented as AND $0xff, Rx, REGTMP. Unfortunately there
is no 3-operand AND-with-immediate instruction and so it was emulated
by the assembler using two instructions.
This CL uses CMPW instead of AND and also optimizes CMPW to use
the chi instruction where possible.
Overall this CL reduces the size of the .text section of the
bin/go binary by ~2%.
Change-Id: Ic335c29fc1129378fcbb1265bfb10f5b744a0f3f
Reviewed-on: https://go-review.googlesource.com/30690
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Deletes the following s390x instructions:
- ADDME
- ADDZE
- SUBME
- SUBZE
They appear to be emulated PPC instructions left over from the
porting process and I don't think they will ever be useful.
Change-Id: I9b1ba78019dbd1218d0c8f8ea2903878802d1990
Reviewed-on: https://go-review.googlesource.com/30538
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Adds the following instructions and uses them in the SSA backend:
- ANDW
- ORW
- XORW
The instruction encodings for 32-bit operations are typically shorter,
particularly when an immediate is used. For example, XORW $-1, R1
only requires one instruction, whereas XOR requires two.
Also removes some unused instructions (that were emulated):
- ANDN
- NAND
- ORN
- NOR
Change-Id: Iff2a16f52004ba498720034e354be9771b10cac4
Reviewed-on: https://go-review.googlesource.com/30291
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This commit makes the assembler frontend reorder the operands so that
they are in the order the backend expects. The index should be first
for consistency with the other vector instructions.
Before this commit no operand order would have been accepted so this
isn't a breaking change.
Change-Id: I188d57eeb338d27fa1fa6845de0d6d1521b7a6c3
Reviewed-on: https://go-review.googlesource.com/29855
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These instructions are the same as BLT and BLE except that they
also branch if the 'unordered' bit is set in the condition code.
They are already used by the SSA backend. This change allows them
to be used in hand-written assembly code.
Change-Id: Ie9b5985a5e87ea22e8043567a286e09dce16a2db
Reviewed-on: https://go-review.googlesource.com/29930
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use the A{,G}HI instructions where possible (4 bytes instead of 6 bytes
for A{,G}FI). Also, use 32-bit operations where appropriate for
multiplication.
Change-Id: I4041781cda26be52b54e4804a9e71552310762d0
Reviewed-on: https://go-review.googlesource.com/29733
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also adds the 'find leftmost one' instruction (FLOGR) and replaces the
WORD-encoded use of FLOGR in math/big with it.
Change-Id: I18e7cd19e75b8501a6ae8bd925471f7e37ded206
Reviewed-on: https://go-review.googlesource.com/29372
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current implementation for Power architecture does not include the vector
(Altivec) registers. This adds the 32 VMX registers and the most commonly used
instructions: X-form loads/stores; VX-form logical operations, add/sub,
rotate/shift, count, splat, SHA Sigma and AES cipher; VC-form compare; and
VA-form permute, shift, add/sub and select.
Fixes#15619
Change-Id: I544b990631726e8fdfcce8ecca0aeeb72faae9aa
Reviewed-on: https://go-review.googlesource.com/25600
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: David Chase <drchase@google.com>
Replace the AGLOBL pseudo-op with a method to directly register an
LSym as a global. Similar to how we previously already replaced the
ADATA pseudo-op with directly writing out data bytes.
Passes toolstash -cmp.
Change-Id: I3631af0a2ab5798152d0c26b833dc309dbec5772
Reviewed-on: https://go-review.googlesource.com/29366
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This adds the support for the ppc64le isel instruction so
it can be used by SSA.
Fixed#16771
Change-Id: Ia2517f0834ff5e7ad927e218b84493e0106ab4a7
Reviewed-on: https://go-review.googlesource.com/28611
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This commit adds the following instructions to support the new SSA
backend for s390x:
32-bit operations:
ADDW
SUBW
NEGW
FNEGS
Conditional moves:
MOVDEQ
MOVDGE
MOVDGT
MOVDLE
MOVDLT
MOVDNE
Unordered branches (for floating point comparisons):
BLEU
BLTU
Modulo operations:
MODW
MODWU
MODD
MODDU
The modulo operations might be removed in a future commit because
I'd like to change DIV to produce a tuple once the old backend is
removed.
This commit also removes uses of REGZERO from the assembler. They
aren't necessary and R0 will be used as a GPR by SSA.
Change-Id: I05756c1cbb74bf4a35fc492f8f0cd34b50763dc9
Reviewed-on: https://go-review.googlesource.com/29075
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As cmd/internal/obj is coordinating the definition of GOOS, GOARCH,
etc across the compiler and linker, turn its functions into globals
and use them everywhere.
Change-Id: I5db5addda3c6b6435c37fd5581c7c3d9a561f492
Reviewed-on: https://go-review.googlesource.com/28854
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
FIDBR and FIEBR can be used for floating-point to integer rounding.
The relevant functions (Ceil, Floor and Trunc) will be updated
in a future CL.
Change-Id: I5952d67ab29d5ef8923ff1143e17a8d30169d692
Reviewed-on: https://go-review.googlesource.com/27826
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
