g used to produce CMPQ/SBBQ/ANDQ, but f didn't even though
s&15 is at most s&63.
func f(x uint64, s uint) uint64 {
return x >> (s & 63)
}
func g(x uint64, s uint) uint64 {
return x >> (s & 15)
}
Change-Id: Iab4a1a6e10b471dead9f1203e9d894677cf07bb2
Reviewed-on: https://go-review.googlesource.com/21048
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 20892 converted the misc/cgo/testcarchive test to Go.
Unfortunately, dist does not (yet) support tests running off the host
so the testcarchive is disabled for now.
For #14318
Change-Id: Iab3d0a7b5309187a603b48f22a7fa736f089f89d
Reviewed-on: https://go-review.googlesource.com/21070
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Some minor scoping cleanups found by a very old version of grind.
Change-Id: I1d373817586445fc87e38305929097b652696fdd
Reviewed-on: https://go-review.googlesource.com/21064
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This commit replaces some of
for i := len(x) - 1; i >= 0; i-- {...}
style loops, which do not rely on reverse iteration order.
Change-Id: I5542834286562da058200c06e7a173b13760e54d
Reviewed-on: https://go-review.googlesource.com/21044
Reviewed-by: Keith Randall <khr@golang.org>
Get rid of (*Mpint).Add's "quiet" parameter: it's always set to 0.
Inline (*Mpint).shift into (*Mpint).Lsh and (*Mpint).Rsh. There's no
need for a common shift method that can handle both left or right
shifts based on sign when the higher level abstractions only ever do
one or the other.
Change-Id: Icd3b082413f9193961b6835279e0bd4b6a6a6621
Reviewed-on: https://go-review.googlesource.com/21050
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Start working on arm port. Gets close to correct
code for fibonacci:
func fib(n int) int {
if n < 2 {
return n
}
return fib(n-1) + fib(n-2)
}
Still a lot to do, but this is a good starting point.
Cleaned up some arch-specific dependencies in regalloc.
Change-Id: I4301c6c31a8402168e50dcfee8bcf7aee73ea9d5
Reviewed-on: https://go-review.googlesource.com/21000
Reviewed-by: David Chase <drchase@google.com>
Remove reflect type information for unexported methods that do not
satisfy any interface in the program.
Ideally the unexported method would not appear in the method list at
all, but that is tricky because the slice is built by the compiler.
Reduces binary size:
cmd/go: 81KB (0.8%)
jujud: 258KB (0.4%)
For #6853.
Change-Id: I25ef8df6907e9ac03b18689d584ea46e7d773043
Reviewed-on: https://go-review.googlesource.com/21033
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
khr: Lifting the nil check out of the loop altogether is an admirable
goal, and this rewrite is one step on the way. But without lifting it
out of the loop, the rewrite is just hurting us.
Fixes#14917
Change-Id: Idb917f37d89f50f8e046d5ebd7c092b1e0eb0633
Reviewed-on: https://go-review.googlesource.com/21040
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is to support https://golang.org/cl/18057, which is going to add
Windows support to this directory. Better to write the test in Go then
to have both test.bash and test.bat.
Update #13494.
Change-Id: I4af7004416309e885049ee60b9470926282f210d
Reviewed-on: https://go-review.googlesource.com/20892
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No need to have both ops when they do the same thing.
Just declare MOVBload to zero extend and we can get rid
of MOVBQZXload. Same for W and L.
Kind of a followon cleanup for https://go-review.googlesource.com/c/19506/
Should enable an easier fix for #14920
Change-Id: I7cfac909a8ba387f433a6ae75c050740ebb34d42
Reviewed-on: https://go-review.googlesource.com/21004
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This makes the rounding bug fix in math/big for issue 14651 available
to the compiler.
- changes to cmd/compile/internal/big fully automatic via script
- added test case for issue
- updated old test case with correct test data
Fixes#14651.
Change-Id: Iea37a2cd8d3a75f8c96193748b66156a987bbe40
Reviewed-on: https://go-review.googlesource.com/20818
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Shows up occassionally, especially after p = p[:8:len(p)]
Updates #14905
Change-Id: Iab35ef2eac57817e6a10c6aaeeb84709e8021641
Reviewed-on: https://go-review.googlesource.com/21025
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Escape analysis has a hard time with tree-like
structures (see #13493 and #14858).
This is unlikely to change.
As a result, when invoking a function that accepts
a **Node parameter, we usually allocate a *Node
on the heap. This happens a whole lot.
This CL changes functions from taking a **Node
to acting more like append: It both modifies
the input and returns a replacement for it.
Because of the cascading nature of escape analysis,
in order to get the benefits, I had to modify
almost all such functions. The remaining functions
are in racewalk and the backend. I would be happy
to update them as well in a separate CL.
This CL was created by manually updating the
function signatures and the directly impacted
bits of code. The callsites were then automatically
updated using a bespoke script:
https://gist.github.com/josharian/046b1be7aceae244de39
For ease of reviewing and future understanding,
this CL is also broken down into four CLs,
mailed separately, which show the manual
and the automated changes separately.
They are CLs 20990, 20991, 20992, and 20993.
Passes toolstash -cmp.
name old time/op new time/op delta
Template 335ms ± 5% 324ms ± 5% -3.35% (p=0.000 n=23+24)
Unicode 176ms ± 9% 165ms ± 6% -6.12% (p=0.000 n=23+24)
GoTypes 1.10s ± 4% 1.07s ± 2% -2.77% (p=0.000 n=24+24)
Compiler 5.31s ± 3% 5.15s ± 3% -2.95% (p=0.000 n=24+24)
MakeBash 41.6s ± 1% 41.7s ± 2% ~ (p=0.586 n=23+23)
name old alloc/op new alloc/op delta
Template 63.3MB ± 0% 62.4MB ± 0% -1.36% (p=0.000 n=25+23)
Unicode 42.4MB ± 0% 41.6MB ± 0% -1.99% (p=0.000 n=24+25)
GoTypes 220MB ± 0% 217MB ± 0% -1.11% (p=0.000 n=25+25)
Compiler 994MB ± 0% 973MB ± 0% -2.08% (p=0.000 n=24+25)
name old allocs/op new allocs/op delta
Template 681k ± 0% 574k ± 0% -15.71% (p=0.000 n=24+25)
Unicode 518k ± 0% 413k ± 0% -20.34% (p=0.000 n=25+24)
GoTypes 2.08M ± 0% 1.78M ± 0% -14.62% (p=0.000 n=25+25)
Compiler 9.26M ± 0% 7.64M ± 0% -17.48% (p=0.000 n=25+25)
name old text-bytes new text-bytes delta
HelloSize 578k ± 0% 578k ± 0% ~ (all samples are equal)
CmdGoSize 6.46M ± 0% 6.46M ± 0% ~ (all samples are equal)
name old data-bytes new data-bytes delta
HelloSize 128k ± 0% 128k ± 0% ~ (all samples are equal)
CmdGoSize 281k ± 0% 281k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 921k ± 0% 921k ± 0% ~ (all samples are equal)
CmdGoSize 9.86M ± 0% 9.86M ± 0% ~ (all samples are equal)
Change-Id: I277d95bd56d51c166ef7f560647aeaa092f3f475
Reviewed-on: https://go-review.googlesource.com/20959
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds a new R_PCRELDBL relocation for 2-byte aligned relative
relocations on s390x. Should be removed once #14218 is
implemented.
Change-Id: I79dd2d8e746ba8cbc26c570faccfdd691e8161e8
Reviewed-on: https://go-review.googlesource.com/20941
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Should let the s390x builder progress a little further.
Change-Id: I5eab5f384b0b039f8e246ba69ecfb24de08625d2
Reviewed-on: https://go-review.googlesource.com/20965
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allow names to be used for subexpressions of match rules.
For example:
(OpA x:(OpB y)) -> ..use x here to refer to the OpB value..
This gets rid of the .Args[0].Args[0]... way of naming we
used to use.
While we're here, give all subexpression matches names instead
of recomputing them with .Args[i] sequences each time they
are referenced. Makes the generated rule code a bit smaller.
Change-Id: Ie42139f6f208933b75bd2ae8bd34e95419bc0e4e
Reviewed-on: https://go-review.googlesource.com/20997
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Don't write back parts of a slicing operation if they
are unchanged from the source of the slice. For example:
x.s = x.s[0:5] // don't write back pointer or cap
x.s = x.s[:5] // don't write back pointer or cap
x.s = x.s[:5:7] // don't write back pointer
There is more to be done here, for example:
x.s = x.s[:len(x.s):7] // don't write back ptr or len
This CL can't handle that one yet.
Fixes#14855
Change-Id: Id1e1a4fa7f3076dc1a76924a7f1cd791b81909bb
Reviewed-on: https://go-review.googlesource.com/20954
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
For the following example, but there are a few more in the stdlib:
func histogram(b []byte, h *[256]int32) {
for _, t := range b {
h[t]++
}
}
Change-Id: I56615f341ae52e02ef34025588dc6d1c52122295
Reviewed-on: https://go-review.googlesource.com/20924
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Alexandru Moșoi <alexandru@mosoi.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Allow inlining of functions with switch statements as long as they don't
contain a break or type switch.
Fixes#13071
Change-Id: I057be351ea4584def1a744ee87eafa5df47a7f6d
Reviewed-on: https://go-review.googlesource.com/20824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Left over from CL 20931.
Change-Id: I3b8dd9ef748bcbf70b5118da28135aaa1e5ba3a8
Reviewed-on: https://go-review.googlesource.com/20955
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Constant comparisons against 0 are reasonably common.
Special-case and avoid allocating a new zero value each time.
Change-Id: I6c526c8ab30ef7f0fef59110133c764b7b90ba05
Reviewed-on: https://go-review.googlesource.com/20956
Reviewed-by: Alan Donovan <adonovan@google.com>
Also give them more idiomatic Go names. Adding godocs is outside the
scope of this CL. (Besides, the method names almost all directly
parallel an underlying math/big.Int or math/big.Float method.)
CL prepared mechanically with sed (for rewriting mpint.go/mpfloat.go)
and gofmt (for rewriting call sites).
Passes toolstash -cmp.
Change-Id: Id76f4aee476ba740f48db33162463e7978c2083d
Reviewed-on: https://go-review.googlesource.com/20909
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Minimum architecture of z196 required so that GCC can assemble
gcc_s390x.S in runtime/cgo.
Change-Id: I603ed2edd39f826fb8193740ece5bd11d18c3dc5
Reviewed-on: https://go-review.googlesource.com/20876
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was just a funny way of saying len(Ctxt.Allsym) by now.
Change-Id: Iff75e73c9f7ec4ba26cfef479bbd05d7dcd172f5
Reviewed-on: https://go-review.googlesource.com/20973
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Nothing cares about it.
I did this after looking at the memprof output, but it helps performance a bit:
name old s/op new s/op delta
LinkCmdGo 0.44 ± 3% 0.43 ± 3% -2.20% (p=0.000 n=94+90)
LinkJuju 3.98 ± 5% 3.94 ± 5% -1.19% (p=0.000 n=100+91)
As well as MaxRSS (i.e. what /usr/bin/time -f '%M' prints):
name old MaxRSS new MaxRSS delta
LinkCmdGo 130k ± 0% 120k ± 3% -7.79% (p=0.000 n=79+90)
LinkJuju 862k ± 6% 827k ± 8% -4.01% (p=0.000 n=100+99)
Change-Id: I6306b7b3369576a688659e2ecdb0815b4152ae96
Reviewed-on: https://go-review.googlesource.com/20972
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Debugasm can never be set in cmd/link, so delete it and the code it enables.
Change-Id: If828db0b09f1a9e512dc660ac2750657a769094c
Reviewed-on: https://go-review.googlesource.com/20971
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This expression in readsym:
dup != nil && len(dup.P) > 0 && strings.HasPrefix(s.Name, "gclocals·")
can never be true: if dup != nil, then s.Name is ".dup" (and this is not new:
the same broken logic is present in 1.4, at least). Delete the whole block.
Change-Id: I33b14d9a82b292116d6fd79d22b38e3842501317
Reviewed-on: https://go-review.googlesource.com/20970
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The obj.Nocache helper was only used by the arm back end, move it there.
Change-Id: I5c9faf995499991ead1f3d8c8ffc3b6af7346876
Reviewed-on: https://go-review.googlesource.com/20868
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add a special helper for its one external use.
This is in preparation for an upcoming CL.
Passes toolstash -cmp / buildall.
Change-Id: I9d3463792afe220cc4bc89269bdecf0279abd281
Reviewed-on: https://go-review.googlesource.com/20933
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL addresses a long standing CL by rsc by pushing the use of
Link.Windows down to its two users.
Link.Window was always initalised with the value of runtime.GOOS so
this does not affect cross compilation.
Change-Id: Ibbae068f8b5aad06336909691f094384caf12352
Reviewed-on: https://go-review.googlesource.com/20869
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Another object file change, gives a reasonable improvement:
name old s/op new s/op delta
LinkCmdGo 0.46 ± 3% 0.44 ± 9% -3.34% (p=0.000 n=98+82)
LinkJuju 4.09 ± 4% 3.92 ± 5% -4.30% (p=0.000 n=98+99)
I guess the data section could be mmap-ed instead of read, I haven't tried
that.
Change-Id: I959eee470a05526ab1579e3f5d3ede41c16c954f
Reviewed-on: https://go-review.googlesource.com/20928
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
