Updates #15462
Automatic refactor with sed -e.
Replace all oconv(op, 0) to string conversion with the raw op value
which fmt's %v verb can print directly.
The remaining oconv(op, FmtSharp) will be replaced with op.GoString and
%#v in the next CL.
Change-Id: I5e2f7ee0bd35caa65c6dd6cb1a866b5e4519e641
Reviewed-on: https://go-review.googlesource.com/22499
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
After CL 22461, c-archive build on darwin/arm is by default compiled
with -shared, so update the install path.
Fix build.
Change-Id: Ie93dbd226ed416b834da0234210f4b98bc0e3606
Reviewed-on: https://go-review.googlesource.com/22507
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These are used at the bottom level of various GC operations that must
not be preempted. To be on the safe side, mark them all nosplit.
Change-Id: I8f7360e79c9852bd044df71413b8581ad764380c
Reviewed-on: https://go-review.googlesource.com/22504
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
The new type was inheriting the tflagExtraStar from its prototype.
Fixes#15467
Change-Id: Ic22c2a55cee7580cb59228d52b97e1c0a1e60220
Reviewed-on: https://go-review.googlesource.com/22501
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Fixes#15468
Change-Id: I8723171f87774a98d5e80e7832ebb96dd1fbea74
Reviewed-on: https://go-review.googlesource.com/22524
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
builtin.go was auto-generated via go generate; all other
changes were manual.
The new format reduces the export data size by ~65% on average
for the std library packages (and there is still quite a bit of
room for improvement).
The average time to write export data is reduced by (at least)
62% as measured in one run over the std lib, it is likely more.
The average time to read import data is reduced by (at least)
37% as measured in one run over the std lib, it is likely more.
There is also room to improve this time.
The compiler transparently handles both packages using the old
and the new format.
Comparing the -S output of the go build for each package via
the cmp.bash script (added) shows identical assembly code for
all packages, but 6 files show file:line differences:
The following files have differences because they use cgo
and cgo uses different temp. directories for different builds.
Harmless.
src/crypto/x509
src/net
src/os/user
src/runtime/cgo
The following files have file:line differences that are not yet
fully explained; however the differences exist w/ and w/o new export
format (pre-existing condition). See issue #15453.
src/go/internal/gccgoimporter
src/go/internal/gcimporter
In summary, switching to the new export format produces the same
package files as before for all practical purposes.
How can you tell which one you have (if you care): Open a package
(.a) file in an editor. Textual export data starts with a $$ after
the header and is more or less legible; binary export data starts
with a $$B after the header and is mostly unreadable. A stand-alone
decoder (for debugging) is in the works.
In case of a problem, please first try reverting back to the old
textual format to determine if the cause is the new export format:
For a stand-alone compiler invocation:
- go tool compile -newexport=0 <files>
For a single package:
- go build -gcflags="-newexport=0" <pkg>
For make/all.bash:
- (export GO_GCFLAGS="-newexport=0"; sh make.bash)
Fixes#13241.
Change-Id: I2588cb463be80af22446bf80c225e92ab79878b8
Reviewed-on: https://go-review.googlesource.com/22123
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now it is possible to build a c-archive as PIC on darwin/arm (this is
now the default). Then the system linker can link the binary using
the archive as PIE.
Fixes#12896.
Change-Id: Iad84131572422190f5fa036e7d71910dc155f155
Reviewed-on: https://go-review.googlesource.com/22461
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TestBuiltin will fail if run on Windows and builtin.go was generated
on a non-Windows machine (or vice versa) because path names have
different separators. Avoid problem altogether by not writing pos
info for builtin packages. It's not needed.
Affects -newexport only.
Change-Id: I8944f343452faebaea9a08b5fb62829bed77c148
Reviewed-on: https://go-review.googlesource.com/22498
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The line numbers of ONAMEs are the location of their
declaration, not their use.
The line numbers of named OLITERALs are also the location
of their declaration.
Ignore both of these. Instead, we will inherit the line number from
the containing syntactic item.
Fixes#14742Fixes#15430
Change-Id: Ie43b5b9f6321cbf8cead56e37ccc9364d0702f2f
Reviewed-on: https://go-review.googlesource.com/22479
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Current V-register range is V32~V63 on arm64. This patch changes it to
V0~V31.
fix#15465.
Change-Id: I90dab42dea46825ec5d7a8321ec4f6550735feb8
Reviewed-on: https://go-review.googlesource.com/22520
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Run-TryBot: Aram Hăvărneanu <aram@mgk.ro>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestNoRaceIOHttp does all kinds of bad things:
1. Binds to a fixed port, so concurrent tests fail.
2. Registers HTTP handler multiple times, so repeated tests fail.
3. Relies on sleep to wait for listen.
Fix all of that.
Change-Id: I1210b7797ef5e92465b37dc407246d92a2a24fe8
Reviewed-on: https://go-review.googlesource.com/19953
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates #15462
Semi automatic change with gofmt -r and hand fixups for callers outside
internal/gc.
All the uses of gc.Oconv outside cmd/compile/internal/gc were for the
Oconv(op, 0) form, which is already handled the Op.String method.
Replace the use of gc.Oconv(op, 0) with op itself, which will call
Op.String via the %v or %s verb. Unexport Oconv.
Change-Id: I84da2a2e4381b35f52efce427b2d6a3bccdf2526
Reviewed-on: https://go-review.googlesource.com/22496
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Previously the Transport would cache idle connections from the
Transport for later reuse, but if a peer server disconnected
(e.g. idle timeout), we would not proactively remove the *persistConn
from the Transport's idle list, leading to a waste of memory
(potentially forever).
Instead, when the persistConn's readLoop terminates, remote it from
the idle list, if present.
This also adds the beginning of accounting for the total number of
idle connections, which will be needed for Transport.MaxIdleConns
later.
Updates #15461
Change-Id: Iab091f180f8dd1ee0d78f34b9705d68743b5557b
Reviewed-on: https://go-review.googlesource.com/22492
Reviewed-by: Andrew Gerrand <adg@golang.org>
It comes up every few months that we can't understand why
the go command is rebuilding some package.
Add diagnostics so that the go command can explain itself
if asked.
For #2775, #3506, #12074.
Change-Id: I1c73b492589b49886bf31a8f9d05514adbd6ed70
Reviewed-on: https://go-review.googlesource.com/22432
Reviewed-by: Rob Pike <r@golang.org>
Renames block to blockGeneric so that it can be called when the
assembly feature check fails. This means making block a var on
platforms without an assembly implementation (similar to the sha1
package).
Also adds a test to check that the fallback path works correctly
when the feature check fails.
name old speed new speed delta
Hash8Bytes 6.42MB/s ± 1% 27.14MB/s ± 0% +323.01% (p=0.000 n=10+10)
Hash1K 53.9MB/s ± 0% 511.1MB/s ± 0% +847.57% (p=0.000 n=10+9)
Hash8K 57.1MB/s ± 1% 609.7MB/s ± 0% +967.04% (p=0.000 n=10+10)
Change-Id: If962b2a5c9160b3a0b76ccee53b2fd809468ed3d
Reviewed-on: https://go-review.googlesource.com/22460
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bill O'Farrell <billotosyr@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently we clear gcscanvalid in both casgstatus and
casfrom_Gscanstatus if the new status is _Grunning. This is very
important to do in casgstatus. However, this is potentially wrong in
casfrom_Gscanstatus because in this case the caller doesn't own gp and
hence the write is racy. Unlike the other _Gscan statuses, during
_Gscanrunning, the G is still running. This does not indicate that
it's transitioning into a running state. The scan simply hasn't
happened yet, so it's neither valid nor invalid.
Conveniently, this also means clearing gcscanvalid is unnecessary in
this case because the G was already in _Grunning, so we can simply
remove this code. What will happen instead is that the G will be
preempted to scan itself, that scan will set gcscanvalid to true, and
then the G will return to _Grunning via casgstatus, clearing
gcscanvalid.
This fix will become necessary shortly when we start keeping track of
the set of G's with dirty stacks, since it will no longer be
idempotent to simply set gcscanvalid to false.
Change-Id: I688c82e6fbf00d5dbbbff49efa66acb99ee86785
Reviewed-on: https://go-review.googlesource.com/20669
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This adds a best-effort pass to remove stack barriers immediately
after the end of mark termination. This isn't necessary for the Go
runtime, but should help external tools that perform stack walks but
aren't aware of Go's stack barriers such as GDB, perf, and VTune.
(Though clearly they'll still have trouble unwinding stacks during
mark.)
Change-Id: I66600fae1f03ee36b5459d2b00dcc376269af18e
Reviewed-on: https://go-review.googlesource.com/20668
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently we remove stack barriers during STW mark termination, which
has a non-trivial per-goroutine cost and means that we have to touch
even clean stacks during mark termination. However, there's no problem
with leaving them in during the sweep phase. They just have to be out
by the time we install new stack barriers immediately prior to
scanning the stack such as during the mark phase of the next GC cycle
or during mark termination in a STW GC.
Hence, move the gcRemoveStackBarriers from STW mark termination to
just before we install new stack barriers during concurrent mark. This
removes the cost from STW. Furthermore, this combined with concurrent
stack shrinking means that the mark termination scan of a clean stack
is a complete no-op, which will make it possible to skip clean stacks
entirely during mark termination.
This has the downside that it will mess up anything outside of Go that
tries to walk Go stacks all the time instead of just some of the time.
This includes tools like GDB, perf, and VTune. We'll improve the
situation shortly.
Change-Id: Ia40baad8f8c16aeefac05425e00b0cf478137097
Reviewed-on: https://go-review.googlesource.com/20667
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently we enqueue span root mark jobs during both concurrent mark
and mark termination, but we make the job a no-op during mark
termination.
This is silly. Instead of queueing them up just to not do them, don't
queue them up in the first place.
Change-Id: Ie1d36de884abfb17dd0db6f0449a2b7c997affab
Reviewed-on: https://go-review.googlesource.com/20666
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently we free cached stacks of dead Gs during STW stack root
marking. We do this during STW because there's no way to take
ownership of a particular dead G, so attempting to free a dead G's
stack during concurrent stack root marking could race with reusing
that G.
However, we can do this concurrently if we take a completely different
approach. One way to prevent reuse of a dead G is to remove it from
the free G list. Hence, this adds a new fixed root marking task that
simply removes all Gs from the list of dead Gs with cached stacks,
frees their stacks, and then adds them to the list of dead Gs without
cached stacks.
This is also a necessary step toward rescanning only dirty stacks,
since it eliminates another task from STW stack marking.
Change-Id: Iefbad03078b284a2e7bf30fba397da4ca87fe095
Reviewed-on: https://go-review.googlesource.com/20665
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently all free Gs are added to one list. Split this into two
lists: one for free Gs with cached stacks and one for Gs without
cached stacks.
This lets us preferentially allocate Gs that already have a stack, but
more importantly, it sets us up to free cached G stacks concurrently.
Change-Id: Idbe486f708997e1c9d166662995283f02d1eeb3c
Reviewed-on: https://go-review.googlesource.com/20664
Reviewed-by: Rick Hudson <rlh@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Let's define the line number of a multiline rule as the line
number on which the -> appears. This helps make the rule
cover analysis look a bit nicer.
Change-Id: I4ac4c09f2240285976590ecfd416bc4c05e78946
Reviewed-on: https://go-review.googlesource.com/22473
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Instead of eagerly creating strings like "literal 2.01" for every
lexed number in case we need to mention it in an error message, defer
this work to (*parser).syntax_error.
name old allocs/op new allocs/op delta
Template 482k ± 0% 482k ± 0% -0.12% (p=0.000 n=9+10)
GoTypes 1.35M ± 0% 1.35M ± 0% -0.04% (p=0.015 n=10+10)
Compiler 5.45M ± 0% 5.44M ± 0% -0.12% (p=0.000 n=9+8)
Change-Id: I333b3c80e583864914412fb38f8c0b7f1d8c8821
Reviewed-on: https://go-review.googlesource.com/22480
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This simplifies comparison of object files across different builds
by ensuring that the strings in the zcgo.go always appear in the
same order.
Change-Id: I3639ea4fd10e0d645b838d1bbb03cd33deca340e
Reviewed-on: https://go-review.googlesource.com/22478
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This version of the file name honors the -trimprefix flag,
which strips off variable parts like $WORK or $PWD.
The TestCgoConsistentResults test now passes.
Change-Id: If93980b054f9b13582dd314f9d082c26eaac4f41
Reviewed-on: https://go-review.googlesource.com/22444
Reviewed-by: Robert Griesemer <gri@golang.org>
Also adds TestGdbBacktrace to the runtime package.
Dwarf modifications written by Bryan Chan (@bryanpkc) who is also
at IBM and covered by the same CLA.
Fixes#14628
Change-Id: I106a1f704c3745a31f29cdadb0032e3905829850
Reviewed-on: https://go-review.googlesource.com/20193
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The comment says 'DΟ NΟT SUBMIT', and that text being in a file can cause
automated errors or warnings when trying to check the Go sources into other
source control systems.
(We reject that string in CL commit messages, which I've avoided here
by changing the O's to Ο's above.)
Change-Id: I6cdd57a8612ded5208f05a8bd6b137f44424a030
Reviewed-on: https://go-review.googlesource.com/22434
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Make sure ops have the right number of args, set
aux and auxint only if allowed, etc.
Normalize error reporting format.
Change-Id: Ie545fcc5990c8c7d62d40d9a0a55885f941eb645
Reviewed-on: https://go-review.googlesource.com/22320
Reviewed-by: David Chase <drchase@google.com>
Renames block to blockGeneric so that it can be called when the
assembly feature check fails. This means making block a var on
platforms without an assembly implementation (similar to the sha1
package).
Also adds a test to check that the fallback path works correctly
when the feature check fails.
name old speed new speed delta
Hash8Bytes 7.13MB/s ± 2% 19.89MB/s ± 1% +178.82% (p=0.000 n=9+10)
Hash1K 121MB/s ± 1% 661MB/s ± 1% +444.54% (p=0.000 n=10+9)
Hash8K 137MB/s ± 0% 918MB/s ± 1% +569.29% (p=0.000 n=10+10)
Change-Id: Id65dd6e943f14eeffe39a904dc88065fc6a60179
Reviewed-on: https://go-review.googlesource.com/22402
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The linker was incorrectly decoding type name lengths, causing
typelinks to be sorted out of order and in cases where the name was
the exact right length, linker panics.
Added a test to the reflect package that causes TestTypelinksSorted
to fail before this CL. It's not the exact failure seen in #15448
but it has the same cause: decodetype_name calculating the wrong
length.
The equivalent decoders in reflect/type.go and runtime/type.go
have the parenthesis in the right place.
Fixes#15448
Change-Id: I33257633d812b7d2091393cb9d6cc8a73e0138c8
Reviewed-on: https://go-review.googlesource.com/22403
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Here, "fix" means "replace". The new dominator computation
is the "simple" algorithm from Lengauer and Tarjan's TOPLAS
paper, with minimal changes.
Also included is a test that tweaks the fixed error.
Change-Id: I0abdf53d5d64df1e67e4e62f55e88957045cd63b
Reviewed-on: https://go-review.googlesource.com/22401
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is not necessary for reproduceability but it removes
differences due to imported package order between compiles
using textual vs binary export format. The packages list
tends to be very short, so it's ok doing it always for now.
Guarded with a documented (const) flag so it's trivial to
disable and remove eventually.
Also, use the same flag now to enforce parameter numbering.
Change-Id: Ie05d2490df770239696ecbecc07532ed62ccd5c0
Reviewed-on: https://go-review.googlesource.com/22445
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The code sequence for large-offset floating-point stores
includes adding the base pointer to r11. Make sure we
can interpret that instruction correctly.
Fixes build.
Fixes#15440
Change-Id: I7fe5a4a57e08682967052bf77c54e0ec47fcb53e
Reviewed-on: https://go-review.googlesource.com/22440
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
The numbering is only required for parameters of functions/methods
with exported inlineable bodies. For now, always export parameter names
with internal numbering to minimize the diffs between assembly code
dumps of code compiled with the textual vs the binary format.
To be disabled again once the new export format is default.
Change-Id: I6d14c564e734cc5596c7e995d8851e06d5a35013
Reviewed-on: https://go-review.googlesource.com/22441
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
