Restore previous behavior where the object's declaration is returned
as the first reference in find-reference calls.
Fixesgolang/go#36598.
Change-Id: Ibdeaf9971aa5cb1f3244f6a888fe77bdf386e563
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215057
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Now that we understand object "kind" for builtin generic functions, we
can apply it to a couple more places as well:
// prefer rangeable object kinds
for i := range <> {
}
// prefer channels
<- <>
Change-Id: If9cfba3a06b3abde073a9d397000bb3f3b0e9853
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214678
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The main goal is to push the package variant logic from internal/lsp
into internal/lsp/source so all users of internal/lsp/source benefit.
"references" and "rename" now have top-level source.References() and
source.Rename() entry points (as opposed to hanging off
source.Identifier()). I expanded objectsAtProtocolPos() to know about
implicit objects (type switch and import spec), and to
handle *ast.ImportSpec generically. This gets rid of special case
handling of *types.PkgName in various places.
The biggest practical benefit, though, is that "references" no longer
needs to compute the objectpath for every types.Object comparison it
does, instead using direct types.Object equality. This speeds up
"references" and "rename" a lot.
Two other notable improvements that fell out of not using
source.Identifier()'s logic:
- Finding references on an embedded field now shows references to the
field, not the type being embedded.
- Finding references on an imported object now works
correctly (previously it searched the importing package's dependents
rather than the imported package's dependents).
Finally, I refactored findIdentifier() to use pathEnclosingObjNode()
instead of astutil.PathEnclosingInterval. Now we only need a single
call to get the path because pathEnclosingObjNode() has the
"try pos || try pos-1" logic built in.
Change-Id: I667be9bed6ad83912404b90257c5c1485b3a7025
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211999
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Any file could have //line directives in it, which means that we should
never trust a mapper that was looked up for a whole file. Remove the
range conversion helpers that accepted a mapper and look it up on the
spot.
Change-Id: Ic518891fcc1a682b31cbc6d1d4e1e1af1ef21962
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214949
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In cases like:
var foo *someType = bar.(some<>)
We will now complete "some" to "*someType". This involved two changes:
1. Properly detect expected type as *someType in above example. To do
this I just removed *ast.TypeAssertExpr from
breaksExpectedTypeInference() so we continue searching up the AST for
the expected type.
2. If the given type name T doesn't match, also try *T. If *T does
match, we mark the candidate as "makePointer=true" so we know to
prepend the "*" when formatting the candidate.
Change-Id: I05859c68082a798141755b614673a1483d864e3e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212717
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves to our ultimate approach of diagnostics the snapshot
on every file change, instead of carefully picking which files and
packages to diagnose. Analyses are shown for packages whose files are
open in the editor. Reverse dependencies are no longer needed for
source.Diagnostics because they will be invalidated when the snapshot is
cloned, so diagnosing the entire snapshot will bring them up to date.
This even works for go.mod files because all of workspace-level `go list`s
will be canceled as the user types, and then we trigger an uncancellable
go/packages.Load when the user saves. There is still room for improvement
here, but it will require much more careful invalidation of metadata for
go.mod files.
Change-Id: Id068505634b5e701c6f861a61b09a4c6704c565f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214419
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This parameter was added to avoid sending a slew of empty diagnostics
for the initial workspace load. It's actually not needed anymore, as we
can just detect if we have previously sent diagnostics for the given
file, and if not we shouldn't send an empty diagnostic. This is true for
all cases, not just the initial workspace load.
Change-Id: I34a323bc0c0df79edd39630cd25577238b256266
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214287
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change combines the two packages.Load calls that happen on view
creation. Builtins can be loaded along with the rest of the workspace.
To avoid race conditions, create a builtinPackageHandle type for
builtins and use it to create the data.
Updates golang/go#36531
Change-Id: I7aa342c463a0b7718e1ad5fee507622310d8443b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214877
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Package handles should be cached on the snapshot as part of the initial
workspace load, otherwise this cached data will be repeatedly lost and
reconstructed during tests and regular execution.
Fixesgolang/go#36556
Change-Id: If7676685db17519c998b857a812467c7f3cc6003
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214799
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Switch the command line client, and its tests, away from the hardcoded
30-second timeout and to a newly-added custom request.
Inconveniently for us, the jsonrpc2 package only serializes requests,
not replies. (Notifications are requests for this purpose.) So, for a
flow like this:
diagnoseFiles -->
<-- publishDiagnostics
<-- publishDiagnostics
diagnoseFiles <-- (reply)
...there's actually no guarantee that the incoming requests will be
processed before the reply comes in -- it gets to jump the
serialization. The only way to guarantee previous notifications have
been processed is to send another request. I didn't feel like adding
nonstandard notification support, so I just send a fake diagnostic.
Error handling for untyped JSON is hideous so for now we just panic.
Nobody else should be calling these, or if they do it's at their own
risk.
Fixesgolang/go#36518.
Change-Id: I63f8df5bb627c9783314a0d38d2dac8721b3c320
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214583
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds quickfixes for unused dependencies and dependencies that should not be marked as indirect. It also updates the positions for the diagnostics to make more sense relative to the warning message. There is a testing harness now for suggested fixes.
Updates golang/go#31999
Change-Id: I0db3382bf892fcc2d9ab3b633020d9167a0ad09b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213917
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When debugging multiple instances of gopls simultaneously, it is useful
to be able to inspect stateful debugging information for each server
instance, such as the location of logfiles and server startup
information.
This CL adds an additional section to the /info http handler, that
formats additional information related to the gopls instance handling
the request.
Updates golang/go#34111
Change-Id: I6cb8073800ce52b0645f1898461a19e1ac980d2b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214803
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Several docstrings reference earlier names for the symbols they
document. This CL corrects those that I noticed while reading the lsp
code.
Change-Id: I1968459feff7011e070333c99eb149e72d3302de
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214801
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves as much view initialization code into the
initialization function, instead of having it happen on view create.
Also, the `go env` variables that are collected at inconsistent times
are all collected on view creation. That is sufficient, since the view
is recreated if the environment changes.
I had originally hoped that the initial call to `go env` and the
-modfile detection could become part of this parallel initialization as
well, but you can't create a *packages.Config until the temporary
modfile has been set up, so it still makes sense to do that on view
create. This is, however, the reasoning behind the refactorings in
the -modfile detection in this CL. The main changes are a few renamings
and a split between snapshot.ModFiles and view.modFiles to maximize the
amount of work done in the view. I changed view.modfiles to moduleInformation
because I thought we might want to store additional information there at some
point. Rohan, please let me know if you disagree with any of the changes I made,
and I can revert them.
Fixesgolang/go#36487
Change-Id: I504db5a4f41b79bee99ebd391e32e7b520a19569
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214417
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
In golang.org/cl/209419, CheckPackageHandle was renamed to
PackageHandle, but a number of references to CheckPackageHandle remained
in function names and comments.
This CL cleans up most of these, though there was at least one case
(internal/lsp/cache.checkPackageKey) where the obvious renaming
conflicted with another function, so I skipped it.
Change-Id: I517324279ff05bd5b1cab4eeb212a0090ca3e3ad
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214800
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
x_tests can access exports from the test variant of the package under
test. Change loadExportsFromFiles to understand that mode, and use it
where appropriate.
I didn't want to come up with a cache key for for the test variant, so
for now we bypass the cache in these situations.
Fixesgolang/go#29979.
Change-Id: I9959a08da97bbee64c5bcd56e06f548486693156
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213221
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The initial workspace load does not send analyses with diagnostics, but
subsequent diagnostic requests do. If we've already sent diagnostics
with analysis for a file at a given version and snapshot, do not resend
diagnostics for the same file version with analyses.
Change-Id: I6979aa308e8846ff0cb66bd23e0dac488eae5446
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214587
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds a protocol.ColumnMapper when parsing go.mod files. This will prevent us from having to worry about line and column offsets, specifically when converting from the x/mod/modfile position to a span.Span.
Updates golang/go#31999
Change-Id: Iacdfb42d61dfea9b5f70325cf5a87c9575f8f345
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214699
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Support arbitrary client->server requests in the generated code. This is
primitive, with no strong typing, but should be good enough for simple
requests. We can do something fancier later if we want.
Change-Id: Ib83ff6aa49418bda5222b37cde3b150a26552221
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214582
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reloading metadata on demand fails for some our test packages,
because I don't understand how to construct arguments to commands.
Change-Id: Ib18454a09772e854a612528af898d06ce14133c2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214717
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change modifies the source.Error type to have a URI instead of a
FileIdentity associated with an error.
Change-Id: I8056bdc881dd3ec43af02cca1366815c0bc6dfcd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214586
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We now understand what "kind" of type is expected when using various
builtins. For example, when completing "close(<>)" we prefer channels,
and when completing "delete(<>)" we prefer maps.
I also added some code to infer the expected type for the second
argument to "delete()" and for the args to "copy()":
delete(map[someType]int{}, <>) // expect "someType"
copy([]int{}, <>) // expect "[]int"
copy(<>, []int{}) // expect "[]int"
And I marked "new()" as expected a type name, and it infers the type
name properly:
var _ *int = new(<>) // expected type at "<>" is "int"
Fixesgolang/go#36326.
Change-Id: I4295c8753f8341d47010a0553fd2d0c2586f2efa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212957
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change makes sure that diagnostics are sent with the most recently
seen version for a file, instead of a cached version.
Fixesgolang/go#36476
Change-Id: Ibac2757099fdfc71989987cf5851a678f589aadf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214422
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Previously, we would surface a warning message if a user had a missing
dependency in a subdirectory of their module root. This is not
necessary, so do a better job checking for that case.
Change-Id: Ib6fcdcbf6ac191478b9bb1f5f8a55d154fd30b5a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214420
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds the -e flag to ensure that we get the release tags when we are checking if the go version is at least 1.14. This also adjusts the check to be more lenient when it comes to processing the output of the version check.
This also fixes another issue where if the version is not 1.14 we were publishing empty diagnostics for an empty uri. This arose because we did not check if there was a valid go.mod file before we published the reports.
Fixesgolang/go#36488
Change-Id: I5a8057c153f49167811e2bf8e4ade52bf6171d6b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214290
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change removes functions from the snapshot that return package IDs.
We prefer PackageHandles, since getting PackageHandles in a granular
fashion is not effective and causes us to spawn many `go list`
processes. By only ever returning PackageHandles, we can batch metadata
reloads for workspace packages. This enables us to add a check to
confirm that the snapshot is in a good state before returning important
data, like reverse dependencies and workspace package handles.
Change-Id: Icffc8d8e0449864f207c15aa211e84cb158c163f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214383
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change flattens the completion options type into UserOptions and
DebuggingOptions, which will enable us to generate documentation for
these options more effectively. This results in some modifications in
the tests.
Additionally, the fuzzyMatching and caseSensitive boolean flags are
merged into one setting, matcher, which can be used to specify the type
of matcher that is used for completion. Other requests (notably
workspaceSymbols) may need to use a matcher in the future.
Change-Id: I185875e50351be4090c7a2b3340d40286dc9f4a0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212635
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We had previously required a type-checked package for formatting
requests, in order to determine if the package contained any parse
errors. We can get this information directly from the ParseGoHandle, so
there is no need to check the package. This will prevent `go list`
errors from making their way into formatting requests, for which a `go
list` really is not needed.
Updates golang/go#36511
Change-Id: I297f8880367e800d2343f468535efa80d2937071
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214421
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is the beginning of the CLs to refactor the file watching code with
the normal text synchronization code. This hasn't yet been tested other
than with some minimal local testing, so follow-up CLs will be needed.
Updates golang/go#31553
Change-Id: Id081ecc59dd2903057164171bd95f0dc07baa5f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214277
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
There is no reason for these functions to live on the view. They make
more sense as unexported functions in internal/lsp/source.
Initially, I had to propagate contexts through a lot of functions in
internal/lsp/source, but instead I removed the unused contexts forom
snapshot.GetFile.
Change-Id: I8323419d0356feb2010091fe8d3ed35e511f801a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214384
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change will surface errors that come from the mod package. It will handle incorrect usages, invalid directives, and other errors that occur when parsing go.mod files.
Updates golang/go#31999
Change-Id: Icd817c02a4b656b2a71914ee60be4dbe2bea062d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213779
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Our loop to make all candidates use the same "filterText" wasn't
including the final candidate. This was causing strange ordering of
candidates in VSCode when the "worst" candidate happened to match the
prefix exactly (causing VSCode to reorder it to the top).
Fixesgolang/go#36519.
Change-Id: Ie2119ca94d13f337edd241fbde862706bdeee191
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214184
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves the initialization of the view into the view's
creation, instead of forcing the tests to call WorkspacePackageIDs to
initialize.
Change-Id: Iccea820ec268b1851d58821481d92c7a3d4772c3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214279
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Opening a mod file is not sufficient cause to invalidate in the
workspace, so don't.
Change-Id: I2b7703008528e4469be312165deb17fe6856fd74
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214259
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Unfortunately, this can't be tested until golang/go#35880 is resolved,
because only the third-party xurls library detects links without
schemes.
Change-Id: I620581d6ce99c79ae89f3f22ea8ee634c3850a8e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214280
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In one of the many iterations on CL 212102, the contexts propagated
through the initial workspace load were allowed to be canceled. This
should not be allowed because the initial workspace load has to be
completed.
Change-Id: I6c6273b4e58fb9041af518f329f4766ed5f1f81b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213641
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds a test to ensure that your go.mod file remains unchanged when the tempModfile flag is activated. Specifically, it adds a test to ensure that a go directive does not get added to a user's go.mod file when there was not one included before.
Updates golang/go#36247
Change-Id: If8db5508ace5b7222112408255ffa66e4d38797f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214260
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The module resolver needs to recreate the listener map if it's cleared
for a new scan.
Change-Id: If5e945d4f2059f2a79aef3129f963a2c50e90229
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214278
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Resolvers are lazy initialized. That worked fine until the addition of
the scan semaphore -- it's not a good idea to create that lazily, since
you can't synchronize on a channel that doesn't exist.
Specifically, this caused a gopls hang when completion finished without
needing to use the resolver. In that case, we'd call ClearForNewScan/Mod
on an uninitialized resolver, and then hang receiving from a nil
channel.
Instead, eagerly initialize where convenient, and particularly the scan
semaphore.
Change-Id: I3adb1ae76b751650995e50f50346e06fd9c9f88d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214258
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Minimize the issues at master by not running workspace-level diagnostics
on mod file changes. Once the initial workspace load stabilizes we will
be able to go back to that approach.
Also, a couple of minor changes along the way while debugging.
Change-Id: Ib3510e15171326a1b89f08ef0031a3ef7d9ac4ec
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214257
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Filesystem walks of large GOPATHs/module caches can take seconds,
especially on systems with slow filesystems like MacOS and WSL. We don't
want to block completion requests on walks finishing. At the same time,
cancelling a walk midway through results in an unusable cache, where we
don't know which parts have been scanned so far.
The best option is to run the walks in a separate goroutine. Then we can
detach and let them finish. On the other side, we need to be able to
reattach for the next completion request.
Introduce a new method on caches, ScanAndListen, which first processes
all the items in the cache, then notifies of any new items. This allows
us to reattach to an existing scan without missing anything.
The background scan introduces concurrency to the resolvers where there
wasn't any before. We can't use mutexes, because there's no way to stop
Lock() when a context expires. Use a 1-element semaphore channel to
accomplish the same effect.
Along the way: Only rescan GOPATH if the resolver has been cleared. None
of this makes sense for GOPATH without that. Fix a bug where we were
scanning the main module twice in module mode. Stop loading exports in
module tests, it slows them down a ton.
Change-Id: I978efae733ccba0c0cdc8e8fe6892bf5f15feac8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213217
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A test variant for a package can only be reloaded by running go/packages
on the non-test variants import path with the -test flag. We need to
cache this import path in order to be able to reload a test package
on-demand.
Also, always ignore test main packages by detecting them in the
metadata.
Fixesgolang/go#36473
Change-Id: I6e5a61c8e73689212303ae09fa3aed4a2ee8762a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213660
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change splits source.Diagnostics into source.FileDiagnostics and
source.PackageDiagnostics. There isn't much difference in functionality,
but this just simplifies the process of getting diagnostics if you only
have a PackageHandle.
Change-Id: I62c0de8778065a4c46cc5672e2834ce5c63fe012
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213644
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We were ignoring errors in a few cases and returning incorrect errors in
the case of the command-line interface (no identifier found when there
were just no references). I think it is better for references to return
an error than incomplete results.
Change-Id: Id90bca58ebdd9f6a910853cb4ac5b6ab6bec57f8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213817
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change consolidates the FileKind into only the FileHandle.
Previously, it had been set in multiple places, which required users to
pass in a FileKind when fetching a file. This resulted in confusion,
particularly in places when users did not have access to the file kind.
Change-Id: I9e07d7320c46a21d453ffe108d1431a615706a71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213459
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This isn't a strictly necessary change, but it simplifies things for
open files when the initial workspace load diagnostics come in too late.
Updates golang/go#36452
Change-Id: I85a9c201876b7c63a97d8dca020fc396b3c57706
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213820
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change surfaces a warning to the user if they might be coding in a
multi-file ad-hoc package.
Updates golang/go#36416
Change-Id: Ifaa15a0777ea97e62c1477fb33911636b13e073e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213458
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is the first step to surfacing potential fixes and suggestions to a user's go.mod file. Specifically, it will show a warning if you have a dependency that is not used, or if a dependency is declared as indirect when it should be direct and vice versa.
This CL adds functionality for version of Go that are >= 1.14.
Updates golang/go#31999
Change-Id: Id60fa0ee201dcd843f62e2659dda8e795bd671db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211937
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were marking all literal candidates as addressable so we were
getting invalid candidates like "&int()". Fix it to only mark literal
struct, array, slice and map types as addressable.
I also fixed the unnamed literal candidate to pass the dereferenced
expected type. For example, if the expected type was "*[]int" we were
passing a literal type of "*[]int" which wasn't working anymore. Now
we pass "[]int" and take its address as "&[]int{}".
Change-Id: I5d0ee074d3cc91c39dd881630583e31be5a05579
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212677
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
As usual, I forgot to clear out the import spec's name when it matches
the import path.
Change-Id: I4ddd49b70e0db95fcd30d2968b098327fac39a92
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213222
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Muir Manders <muir@mnd.rs>
Reviewed-by: zikaeroh <zikaeroh@gmail.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the tempModfile flag was enabled, there would be some go
commands that would run without the -modfile flag. This change adds
the config's buildFlags to the invokeGo command in go/packages and
updates how we are checking if the go version is 1.14 within the
modfileFlagExists function.
Fixesgolang/go#36247
Change-Id: I436666c3fcad33e85ba00aec5f227fe4a0e638b8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212477
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We downrank untyped constant candidates so that we prefer candidates
whose type matches exactly. However, this was causing builtin
constants like "true" to be outranked by candidates that fuzzily match
"true". Fix by not downranking builtin constants.
Fixesgolang/go#36363.
Change-Id: I14801688c96efdbb7ff9fee69f66028530df984c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213137
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The initial workspace load was happening when a view was created, in serial.
It should really just be kicked off in a separate goroutine once we create a
new view. Implementing this change required some other significant changes,
particularly the additional work being done by the WorkspacePackageIDs
method.
Some other changes had to be made while debugging. In particular, the
modification to the circular dependencies test was a consequence of
golang/go#36265.
Change-Id: I97586c9574f6c4106172d7983e4c6fad412e6aa1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212102
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Test variants and test mains can result in multiple packages being
loaded for a single ID. Handle this case in the PackageHandle function
instead of returning an error.
Change-Id: Ic0024c5bded162a3e78a9cdcb9566449f3683e35
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213457
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When dealing with cgo files, we need to pass a Mapper for the authored
file. I got most of the sites in CL 208501, but missed this one.
I was nervous about starting to propagate errors, but all the tests
passed, so shrug.
Change-Id: I7505e670e9c01d719c72c3f99d01c8153c3d2ff5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212862
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
An important part of letting the callback choose what to load is...not
loading the stuff it doesn't want.
Change-Id: I4048d7aed756b6ebc26fb6f8e384f44c64281f90
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213129
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There were a few cases that we were missing when caching diagnostics.
The first was caching empty diagnostics from the initial workspace load,
so we were resending old empty diagnostics. The second missing case was
resending diagnostics for the same version of a file.
Fixesgolang/go#36340.
Change-Id: I5c55b47a60fe94b10e76be99714cb983f9b84b54
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213122
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
CL 212102 contains a few cleanup-type fixes that are unrelated to the
actual content of that CL. Pull them out to make the diffs simpler.
Change-Id: I6b7e34320f2889d05179c8aeb8cb7f8f4c505a3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212917
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that we're storing module information per-directory, we don't need
to pre-compute the need for a replace statement. And we never have the
package name in the place it used to be set.
Change-Id: I3b0845dc49f52f8c449840410dbb786fe903d29d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212861
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Packages that have already been loaded by gopls are more likely to be
used, and have full type information. Check them for completion
candidates before scanning the disk.
Also, minor bug fixes: add a missing mutex, and use a lower-than-usual
score for typed unimported completions.
Change-Id: I46388802913f9a89342fb47290f704b471154ec0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212860
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When finding completion candidates, we can use the same tricks
goimports uses to ignore directories that look irrelevant.
Change-Id: I114a3d4e487aed7f59fc48b2f86d42129baf5183
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212859
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now that we have all these callbacks, it's strange to have a list of
root types to exclude on the side. Merge that into the callback.
Change-Id: I8dc88e095362a8d2e180196ad9b81e17d4d34949
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212858
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In scan implementations, stop after cancellation, and swallow the
context's error for convenience.
In the module implementation specifically, try to avoid scanning if the
cache is enough to satisfy the user. When we do have to scan, prioritize
module dependencies before the whole cache.
Change-Id: I23dc98df016f9fca4f31c7ded3d11bc257c29b94
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212857
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We only need to return a relatively small number of completions to the
user. There's no point continuing once we have those, so switch the
completion functions to be callback-based, and cancel once we've got
what we want.
Change-Id: Ied199fb1f41346819c7237dfed8251fa3ac73ad7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212634
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I want to stop sorting unimported completions. We still want to show
users something reasonable, so use label as a tiebreaker for score in
the higher level completion function.
To maintain the current sorting, we need to adjust scores by search
depth (height?) for lexical completions. A few tests are really ties,
and need sorting in the test case.
Change-Id: Ie2d09fdcbebf6fda4ab33a2f16c579d12b0f26ad
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212633
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
No point in constructing the defaults in three places.
Change-Id: I2b0776910a933a7250245bd82dc27e63c34df18a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212632
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We have multiple use cases for scanning: goimports, import completion,
and unimported completions. All three need slightly different features,
and the latter have very different performance considerations. Scanning
everything all at once and returning it was not good enough for them.
Instead, design the API as a series of callbacks for each
directory/package: first we discover its existence, then we load its
package name, then we load its exports. At each step the caller can
choose whether to proceed with the package. Import completion can stop
before loading exports, goimports can apply its directory name
heuristics, and in the future we'll be able to stop the scan short once
we've found all the results we want for completions.
I don't intend any significant changes here but there may be some little
ones around the edges.
Change-Id: I39c3aa08cc0e4793c280242c342770f62e101364
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212631
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We don't use the go/packages resolver in goimports, and as we develop
gopls it only becomes harder to use there. Give up.
Change-Id: Ic8b566c6dd730b23b0c81d7d34a41f16fe0be7e8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212630
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Unimported completions are always low-priority. If the user already
has 100 completion options, the unimported ones are probably not useful.
There's no point in calculating any of them.
Also, only do unimported completions for package members when they're
enabled. Oops.
Change-Id: I7535a22ad56bed869dceb6cd0ffdfc6390cf8eb5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212629
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The metadata for the workspace packages may not be available when we
need it, so we should allow loading a single package ID. This can be
improved in follow-up CLs by consolidating the individual IDs into one
call to packages.Load. Some adjustments from CL 212102 were split out
into this CL.
Change-Id: I173a79a3cb136530bc99d093f1c2be189eac8ce2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212628
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change treats text of the format golang/go#1234 as a link to the Go
issue tracker. This will improve the readability of TODOs that include a
link to an issue, since it doesn't have to be an actual link.
Change-Id: I27606ceb9cbb15bc6bfb1d7aa660d3f4fdd08739
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212518
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change cleans up the structure of the Options struct in order to
clearly delineate which options should be configurable for the user.
Follow-up work is needed to refactor the completion options to fit into
this structure, as well as to make sure that the name of the field is
the name of the setting. This will make it easier to generate markdown
documentation from the code.
Also, remove options that are no longer in-use and mark them as
deprecated.
Change-Id: Ib34ae25789e21b76077a564601e487fbebfc5f48
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212519
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Our current implementation isn't robust, and it doesn't seem worth it to
invest significant effort in improving it when this library exists.
Also, make the protocol part of the default URL regex non-optional, as
the alternative is that any string of the format "foo.bar" will appear
to be a link.
Updates golang/go#33505
Change-Id: Ia430a1c193eded394f8af12050bdd4dc2a9ccc94
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212517
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
VSCode doesn't like (read: ignores) candidates whose filterText begins
with "&", so trim it off.
I also tweaked "addressed" candidates to include the "&" prefix in the
item label as well so the user can see what they will get.
Change-Id: I85840d036e379a202b72e28c5257807a069ae45d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212406
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We now support taking the address of objects to make better completion
candidates. For example:
i := 123
var p *int = <> // now you get a candidate for "&i"
This required that we track addressability better, particularly when
searching for deep candidates. Now each candidate knows if it is
addressable, and the deep search propagates addressability to child
candidates appropriately.
The basic propagation logic is:
- In-scope *types.Var candidates are addressable. This handles your
basic "foo" variable whose address if "&foo".
- Surrounding selector is addressable based on type checker info. This
knows "foo.bar.<>" is addressable but "foo.bar().<>" isn't
- When evaluating deep completions, fields after a function call lose
addressability, but fields after a pointer regain addressability. For
example, "foo.bar()" isn't addressable, but "foo.bar().baz" is
addressable if "bar()" returns a pointer.
Fixesgolang/go#36132.
Change-Id: I6a8659eb8c203262aedf86844ac39a2d1e81ecc4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212399
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the start of a significant refactoring to implementations,
references, and rename (i.e. everything that searches across
packages). The main goal of the refactoring is to push the package
variant logic from internal/lsp into internal/source so that all users
of source benefit, not just internal/lsp. It also makes it easier to
write tests for various cases because the source tests invoke the
source package directly (so previously did not include all the package
variants).
Currently source.Identifer() handles lots of disparate use cases.
Things like definition and hover don't care about package variants but
do care about other random bits of info that may not apply to
implementations or references. So, I'm splitting implementations out
from source.Identifier. As I work through references and rename
hopefully things will end up separated into smaller chunks.
I also improved implementation deduping to happen earlier. I thought I
could dedupe using obj.Pos(), but mirror objects in package variants
have different positions (suggesting they aren't reusing the
same *ast.File). Instead I used token.Position to dedupe.
Change-Id: I81c2b3ec33bf12640accb852be9ecdea4aa24d69
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211718
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Make the score and import info be fields on "candidate" since they are
properties of the candidate. There shouldn't be a functional change
here; I'm just consolidating things in preparation for an additional
piece of candidate metadata.
Change-Id: I4c7c8ef40e8e5db7b52691cca21490ba13c17642
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212398
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the enclosing value spec specifies a type on the LHS, we now prefer
completions of that type on the RHS. For example:
i := 123
var foo int = // prefer "i" since we know we want an int
I also added a special case to lexical() to know that we can't offer
objects defined on the LHS as completions on the RHS. For example:
var foo int = // don't offer "foo" as completion
Change-Id: I8e24245a2bc86a29887360e7f642a4cbb87fa6ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212401
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This commit will delete the temporary go.mod file that is attached
to a view when the session is shutdown.
Updates golang/go#31999
Change-Id: I0f6b0663b0a814ce45d9b12468669f415f8c36aa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212479
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
the current implementation likes to sort maps, so we make sure
tag lists are in sorted order already so that a stable encoder
produces the same result
Change-Id: Ia7ce05f35edb636817c354d9df02de753a48fe1d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210216
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
There was a fragment of a sentence that must have been from a previous version
(as it talks about a return value for a function that does not have one).
Change-Id: I9d154fe10711344f93e1d49b68a811dbc9772710
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212241
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
has no impact because there are no use cases that don't set it to true right now
Change-Id: I2bc485226078c710bdc36397b96755cdce82d9cc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212242
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Now the tests are at a high enough level, we can
switch them to using the full exporter by bulding
a fake http client to bind it to. This lets us
use the true public interface and also excercise
more of the functionality in the tests.
With this we are now ready to replace the entire
implementation safely.
Change-Id: Ifdbf6230de3ec7c7c5381c840b135cb7a0bc1e55
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209161
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
CL 212037 introduced a bug with saving overlays. Since VS Code sends nil
contents for a file on save, we were deleting overlay contents on save.
This resulted in very strange behavior.
Also rename overlay.data to overlay.text to match variable names.
Fixesgolang/go#36224
Change-Id: I7f2d12e369aa7f6daa2c9f36c33468ec6bf61930
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212199
Reviewed-by: Michael Matloob <matloob@golang.org>
In one of my previous refactoring changes, I lost the fact that the
context should be detached before invalidating a file's contents. If
this function is canceled, we will be in a bad state.
Also, small change to return ctx.Err() instead of a custom error message
from (*packageHandle).check.
Change-Id: I19e513e09e438feee105fdd89cb7364a0c3c5e7f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212104
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Now that `go list` errors are sufficient for us to determine a circular
dependency, we don't need to cache errors on dependency packages.
Change-Id: I0633aeb356f93d21afed3371d61d7eae7de255ac
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212197
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change merges the small helper functions that modified overlays
into a single function and removes the openFiles sync.Map in the view.
Change-Id: Id94c7d86228c9628b7373fab0030ad0c8018dda5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212037
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As a followup to CL 204203, prefer direct dependencies over indirect.
This should improve results for common names like "log" and "errors".
Updates golang/go#36077.
Change-Id: I3f8cfa070832c2035aec60c4e583ee1c0abf5085
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212021
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change eliminates the extra step of calling GetFile on the view and
getting the FileHandle from the snapshot. It also eliminiates the
redundant source.File type. Follow up changes will clean up the file
kind handling, since it still exists on the fileBase type.
Change-Id: I635ab8632821b36e062be5151eaab425a5698f60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
