On Wasm, the offset was not folded into LoweredAddr, so it was
not rematerializeable. This led to the address-taken operation
in some cases generated too early, before the local variable
becoming live. The liveness code thinks the variable live when
the address is taken, then backs it up to live at function
entry, then complains about it, because nothing other than
arguments should be live on entry.
This CL folds the offset into the address operation, so it is
rematerializeable and so generated right before use, after the
variable actually becomes live.
It might be possible to relax the liveness code not to think a
variable live when its address being taken, but until the address
actually being used. But it would be quite complicated. As we're
late in Go 1.11 freeze, it would be better not to do it. Also,
I think the address operation is rematerializeable now on all
architectures, so this is probably less necessary.
This may also be a slight optimization, as the address+offset is
now rematerializeable, which can be generated on the Wasm stack,
without using any "registers" which are emulated by local
variables on Wasm. I don't know how to do benchmarks on Wasm. At
least, cmd/go binary size shrinks 9K.
Fixes#25966.
Change-Id: I01e5869515d6a3942fccdcb857f924a866876e57
Reviewed-on: https://go-review.googlesource.com/120599
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
For non-unit increment, loopbce checks to see if the
increment evenly divides the difference between (constant)
loop start and end. This test panics when the increment
is zero.
Fix: check for zero, if found, don't optimize the loop.
Also added missing copyright notice to loopbce.go.
Fixes#26043.
Change-Id: I5f460104879cacc94481949234c9ce8c519d6380
Reviewed-on: https://go-review.googlesource.com/120759
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If expanding an inline function body required lazily expanding a
package-scoped type whose identifier was shadowed within the function
body, the lazy expansion would instead overwrite the local symbol
definition instead of the package-scoped symbol. This was due to
importsym using s.Def instead of s.PkgDef.
Unfortunately, this is yet another consequence of the current awkward
scope handling code.
Passes toolstash-check.
Fixes#25984.
Change-Id: Ia7033e1749a883e6e979c854d4b12b0b28083dd8
Reviewed-on: https://go-review.googlesource.com/120456
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
MOVWconst's AuxInt is Int32. SSA check complains if the AuxInt
does not fit in int32. Convert uint32 to int32 to make it happy.
The generated code is unchanged. MOVW only cares low 32 bits.
Passes "toolstash -cmp" std cmd for ARM.
Fixes#25993.
Change-Id: I2b6532c9c285ea6d89652505fb7c553f85a98864
Reviewed-on: https://go-review.googlesource.com/120335
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Adds the appropriate check to inl.go.
Includes tests of both -race+go:norace and plain go:norace.
Fixes#24651.
Change-Id: Id806342430c20baf4679a985d12eea3b677092e0
Reviewed-on: https://go-review.googlesource.com/119195
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Inlining of switch statements into a RETURNed expression
can sometimes lead to the switch being walked twice, which
results in a miscompiled switch statement. The bug depends
on:
1) multiple results
2) named results
3) a return statement whose expression includes a call to a
function containing a switch statement that is inlined.
It may also be significant that the default case of that
switch is a panic(), though that's not proven.
Rearranged the walk case for ORETURN so that double walks are
not possible. Added a test, because this is so fiddly.
Added a check against double walks, verified that it fires
w/o other fix.
Fixes#25776.
Change-Id: I2d594351fa082632512ef989af67eb887059729b
Reviewed-on: https://go-review.googlesource.com/118318
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Ensure that compiler error suggestions after case insensitive
field lookups don't mistakenly reported unexported fields if
those fields aren't in the local package being processed.
Fixes#25727
Change-Id: Icae84388c2a82c8cb539f3d43ad348f50a644caa
Reviewed-on: https://go-review.googlesource.com/117755
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The original fix (https://go-review.googlesource.com/c/go/+/35831)
for this issue was incorrect as it reported cycles in cases where
it shouldn't.
Instead, use a different approach: A type cycle containing aliases
is only a cycle if there are no type definitions. As soon as there
is a type definition, alias expansion terminates and there is no
cycle.
Approach: Split sprint_depchain into two non-recursive and more
easily understandable functions (cycleFor and cycleTrace),
and use those instead for cycle reporting. Analyze the cycle
returned by cycleFor before issueing an alias cycle error.
Also: Removed original fix (main.go) which introduced a separate
crash (#23823).
Fixes#18640.
Fixes#23823.
Fixes#24939.
Change-Id: Ic3707a9dec40a71dc928a3e49b4868c5fac3d3b7
Reviewed-on: https://go-review.googlesource.com/118078
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The wasm archtecture was missing a rule to handle OffPtr with a
negative offset. This commit makes it so OffPtr always gets lowered
to I64AddConst.
Fixes#25741
Change-Id: I1d48e2954e3ff31deb8cba9a9bf0cab7c4bab71a
Reviewed-on: https://go-review.googlesource.com/116595
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
In the old binary export format, parameter names for parameter lists
which contained only types where never written, so this problem didn't
come up.
Fixes#25101.
Change-Id: Ia8b817f7f467570b05f88d584e86b6ef4acdccc6
Reviewed-on: https://go-review.googlesource.com/116376
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The stack frame includes the callee args section. At the point where
we were checking the frame size, that part of the frame had not been
computed yet. Move the check later so we can include the callee args size.
Fixes#20780
Update #25507
Change-Id: Iab97cb89b3a24f8ca19b9123ef2a111d6850c3fe
Reviewed-on: https://go-review.googlesource.com/115195
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Before the CL 115277 we did not run the test on Windows,
so let's just go back to not running the test on Windows.
There is nothing OS-specific about this test,
so skipping it on Windows doesn't seem like a big deal.
Updates #25693Fixes#25586
Change-Id: I1eb3e158b322d73e271ef388f8c6e2f2af0a0729
Reviewed-on: https://go-review.googlesource.com/115857
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL removes the rundircmpout action completely
because it is not used anywhere.
The run case already looks for output files. Rename the cmpout action
mentioned in tests to the run action and remove "cmpout" from run.go.
Change-Id: I835ceb70082927f8e9360e0ea0ba74f296363ab3
Reviewed-on: https://go-review.googlesource.com/115575
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To allow testing of fixedbugs/bug345.go in Go,
a new flag -n is introduced. This flag disables setting
of relative path for local imports and imports search path
to current dir, namely -D . -I . are not passed to the compiler.
Error regexps are fixed to allow running the test in temp directory.
This change eliminates the last place where Perl
script "errchk" was used.
Fixes#25586.
Change-Id: If085f466e6955312d77315f96d3ef1cb68495aef
Reviewed-on: https://go-review.googlesource.com/115277
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we deadcode-remove a block which is a write barrier test,
remove that block from the list of write barrier test blocks.
Fixes#25516
Change-Id: I1efe732d5476003eab4ad6bf67d0340d7874ff0c
Reviewed-on: https://go-review.googlesource.com/115037
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Extend stack frame limit of 1GB to include large argument/return areas.
Argument/return areas are part of the parent frame, not the frame itself,
so they need to be handled separately.
Fixes#25507.
Change-Id: I309298a58faee3e7c1dac80bd2f1166c82460087
Reviewed-on: https://go-review.googlesource.com/115036
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change enables bug248 to be tested with Go code.
For that, it adds a flag -1 to error check and run directory
with one package failing compilation prior the last package
which should be run.
Specifically, the "p" package in bug1.go file was renamed into "q"
to compile them in separate steps,
bug2.go and bug3.go files were reordered,
bug2.go was changed into non-main package.
Updates #25586.
Change-Id: Ie47aacd56ebb2ce4eac66c792d1a53e1e30e637c
Reviewed-on: https://go-review.googlesource.com/114818
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test measures "line churn" which was minimized to help
improve the debugger experience. With proper is_stmt markers,
this is no longer necessary, and it is more accurate (for
profiling) to allow line numbers to vary willy-nilly.
"Debugger experience" is now better measured by
cmd/compile/internal/ssa/debug_test.go
This CL made the obsoleting change:
https://go-review.googlesource.com/c/go/+/102435
Change-Id: I874ab89f3b243b905aaeba7836118f632225a667
Reviewed-on: https://go-review.googlesource.com/113155
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't do direct loads from argument slots if the sizes don't match.
This prevents us from loading from a float32 using a uint64 load
during expressions like uint64(math.float32Bits(f)) where f is a float32 arg.
Fixes#25322
Change-Id: I3887d76f78c844ba546243e7721d811c3d4a9700
Reviewed-on: https://go-review.googlesource.com/112637
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The general policy for the current state of js/wasm is that it only
has to support tests that are also supported by nacl.
The test nilptr3.go makes assumptions about which nil checks can be
removed. Since WebAssembly does not signal on reading a null pointer,
all nil checks have to be explicit.
Updates #18892
Change-Id: I06a687860b8d22ae26b1c391499c0f5183e4c485
Reviewed-on: https://go-review.googlesource.com/110096
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We currently rewrite
(TESTQ (MOVQconst [c] x)) into (TESTQconst [c] x)
and (TESTQconst [-1] x) into (TESTQ x x)
if x is a (MOVQconst [-1]) we will be stuck in the endless rewrite loop.
Don't perform the rewrite in such cases.
Fixes#25006
Change-Id: I77f561ba2605fc104f1e5d5c57f32e9d67a2c000
Reviewed-on: https://go-review.googlesource.com/108879
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This triggers three times while building std,
once in image/png and twice in go/internal/gccgoimporter.
There are no instances in std in which a more aggressive
optimization would have triggered.
This doesn't necessarily avoid an allocation,
because escape analysis is already able in many cases
to use a temporary backing for the string,
but it does at a minimum avoid the runtime call and copy.
Fixes#24937
Change-Id: I7019e85638ba8cd7e2f03890e672558b858579bc
Reviewed-on: https://go-review.googlesource.com/108035
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Due to some recent optimizations related to the compare
instruction, DS-form load instructions started to be used
to load 8-byte go.strings. This can cause link time errors
if the go.string is not aligned to 4 bytes.
For DS-form instructions, the value in the offset field must
be a multiple of 4. If the offset is known at the time the
rules are processed, a DS-form load will not be chosen. But for
go.strings, the offset is not known at that time, but a
relocation is generated indicating that the linker should fill
in the DS relocation. When the linker tries to fill in the
relocation, if the offset is not aligned properly, a link error
will occur.
To fix this, when loading a go.string using MOVDload, the full
address of the go.string is generated and loaded into the base
register. Then the go.string is loaded with a 0 offset field.
Added a testcase that reproduces this problem.
Fixes#24799
Change-Id: I6a154e8e1cba64eae290be0fbcb608b75884ecdd
Reviewed-on: https://go-review.googlesource.com/107855
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
I was wrong. There was a need to loop here.
Fixes#24761
Change-Id: If13b3ab72febde930bdaebdddd1c05e0d0446020
Reviewed-on: https://go-review.googlesource.com/105615
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The check was previously disallowing package main from even importing
a non-function symbol named "main".
Fixes#24801.
Change-Id: I849b9713890429f0a16860ef16b5dc7e970d04a4
Reviewed-on: https://go-review.googlesource.com/106120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Also, when statically building itabs, compare *types.Sym instead of
name alone so that method sets with duplicate non-exported methods are
handled correctly.
Fixes#24693.
Change-Id: I2db8a3d6e80991a71fef5586a15134b6de116269
Reviewed-on: https://go-review.googlesource.com/105039
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously, constant pointer-typed expressions could use either Mpint
or NilVal as their Val depending on their construction, but const.go
expects each type to have a single corresponding Val kind.
This CL changes pointer-typed expressions to exclusively use Mpint.
Fixes#21221.
Change-Id: I6ba36c9b11eb19a68306f0b296acb11a8c254c41
Reviewed-on: https://go-review.googlesource.com/105315
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Don't report errors if we don't have a correct type switch
guard; instead ignore it and leave it to the type-checker
to report the error. This leads to better error messages
concentrating on the type switch guard rather than errors
around (confusing) syntactic details.
Also clean up some code setting up AssertExpr (they never
have a nil Type field) and remove some incorrect TODOs.
Fixes#24470.
Change-Id: I69512f36e0417e3b5ea9c8856768e04b19d654a8
Reviewed-on: https://go-review.googlesource.com/103615
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When test/run script was removed, these two tests
were changed to be executed by test/run.go.
Because errchk does not exit with non-zero status on
errors, they were silently failing for a while.
This change makes 2 things:
1. Compile tested packages in GOROOT/test to match older runner script
behavior (strictly required only in bug345, optional in bug248)
2. Check command output with "(?m)^BUG" regexp.
It approximates older `grep -q '^BUG' that was used before.
See referenced issue for detailed explanation.
Fixes#24629
Change-Id: Ie888dcdb4e25cdbb19d434bbc5cb03eb633e9ee8
Reviewed-on: https://go-review.googlesource.com/104095
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 38338 introduced SSA rules to optimize two types of pointer equality
tests: a pointer compared with itself, and comparison of addresses taken
of two symbols which may have the same base. This patch adds rules to
apply the same optimization to pointer inequality tests, which also ensures
that two pointers to zero-width types cannot be both equal and unequal
at the same time.
Fixes#24503.
Change-Id: Ic828aeb86ae2e680caf66c35f4c247674768a9ba
Reviewed-on: https://go-review.googlesource.com/102275
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In expandmeth, we call expand1/expand0 to build a list of all
candidate methods to promote, and then we use dotpath to prune down
which names actually resolve to a promoted method and how.
However, previously we still computed "followsptr" based on the
expand1/expand0 traversal (which is depth-first), rather than
dotpath (which is breadth-first). The result is that we could
sometimes end up miscomputing whether a particular promoted method
involves a pointer traversal, which could result in bad code
generation for method trampolines.
Fixes#24547.
Change-Id: I57dc014466d81c165b05d78b98610dc3765b7a90
Reviewed-on: https://go-review.googlesource.com/102618
Reviewed-by: Robert Griesemer <gri@golang.org>
The atomic add instructions modify the condition code and so need to
be marked as clobbering flags.
Fixes#24449.
Change-Id: Ic69c8d775fbdbfb2a56c5e0cfca7a49c0d7f6897
Reviewed-on: https://go-review.googlesource.com/101455
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, order desugars map assignment operations like
m[k] op= r
into
m[k] = m[k] op r
which in turn is transformed during walk into:
tmp := *mapaccess(m, k)
tmp = tmp op r
*mapassign(m, k) = tmp
However, this is suboptimal, as we could instead produce just:
*mapassign(m, k) op= r
One complication though is if "r == 0", then "m[k] /= r" and "m[k] %=
r" will panic, and they need to do so *before* calling mapassign,
otherwise we may insert a new zero-value element into the map.
It would be spec compliant to just emit the "r != 0" check before
calling mapassign (see #23735), but currently these checks aren't
generated until SSA construction. For now, it's simpler to continue
desugaring /= and %= into two map indexing operations.
Fixes#23661.
Change-Id: I46e3739d9adef10e92b46fdd78b88d5aabe68952
Reviewed-on: https://go-review.googlesource.com/91557
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
When the slice/string length is very large,
probably artifically large as in CL 97523,
adding BX (length) to R11 (pointer) overflows.
As a result, checking DI < R11 yields the wrong result.
Since they will be equal when the loop is done,
just check DI != R11 instead.
Yes, the pointer itself could overflow, but if that happens,
something else has gone pretty wrong; not our concern here.
Fixes#24187
Change-Id: I2f60fc6ccae739345d01bc80528560726ad4f8c6
Reviewed-on: https://go-review.googlesource.com/97802
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
OCOMPLIT stores the pre-typechecked type in n.Right, and then moves it
to n.Type. However, it wasn't clearing n.Right, so n.Right continued
to point to the OTYPE node. (Exception: slice literals reused n.Right
to store the array length.)
When exporting inline function bodies, we don't expect to need to save
any type aliases. Doing so wouldn't be wrong per se, but it's
completely unnecessary and would just bloat the export data.
However, reexportdep (whose role is to identify types needed by inline
function bodies) uses a generic tree traversal mechanism, which visits
n.Right even for O{ARRAY,MAP,STRUCT}LIT nodes. This means it finds the
OTYPE node, and mistakenly interpreted that the type alias needs to be
exported.
The straight forward fix is to just clear n.Right when typechecking
composite literals.
Fixes#24173.
Change-Id: Ia2d556bfdd806c83695b08e18b6cd71eff0772fc
Reviewed-on: https://go-review.googlesource.com/97719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Otherwise, the error can be confusing if one forgets or doesn't know
that the builtin is being shadowed, which is not common practice.
Fixes#22822.
Change-Id: I735393b5ce28cb83815a1c3f7cd2e7bb5080a32d
Reviewed-on: https://go-review.googlesource.com/97455
Reviewed-by: Robert Griesemer <gri@golang.org>
