The old code was recording the current table output offset,
so the table from the next function would be used instead of
the runtime realizing that there was no table at all.
Add debug constant in runtime to check this for every function
at startup. It's too expensive to do that by default, but we can
do the last five functions. The end of the table is usually where
the C symbols end up, so that's where the problems typically are.
Fixes#10747.
Fixes#11396.
Change-Id: I13592e78017969fc22979fa902e19e1b151d41b1
Reviewed-on: https://go-review.googlesource.com/11657
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Currently we fail to reset the live heap accounting state before the
checkmark mark and before the gctrace=2 extra mark. As a result, if
either are enabled, at the end of GC it thinks there are 0 bytes of
live heap, which causes the GC controller to initiate a new GC
immediately, regardless of the true heap size.
Fix this by factoring this state reset into a function and calling it
before all three possible marks.
This function should be merged with gcResetGState, but doing so
requires some additional cleanup, so it will wait for after the
freeze. Filed #11427 for this cleanup.
Fixes#10492.
Change-Id: Ibe46348916fc8368fac6f086e142815c970a6f4d
Reviewed-on: https://go-review.googlesource.com/11561
Reviewed-by: Russ Cox <rsc@golang.org>
Memory for stacks is manually managed by the runtime and, currently
(with one exception) we free stack spans immediately when the last
stack on a span is freed. However, the garbage collector assumes that
spans can never transition from non-free to free during scan or mark.
This disagreement makes it possible for the garbage collector to mark
uninitialized objects and is blocking us from re-enabling the bad
pointer test in the garbage collector (issue #9880).
For example, the following sequence will result in marking an
uninitialized object:
1. scanobject loads a pointer slot out of the object it's scanning.
This happens to be one of the special pointers from the heap into a
stack. Call the pointer p and suppose it points into X's stack.
2. X, running on another thread, grows its stack and frees its old
stack.
3. The old stack happens to be large or was the last stack in its
span, so X frees this span, setting it to state _MSpanFree.
4. The span gets reused as a heap span.
5. scanobject calls heapBitsForObject, which loads the span containing
p, which is now in state _MSpanInUse, but doesn't necessarily have
an object at p. The not-object at p gets marked, and at this point
all sorts of things can go wrong.
We already have a partial solution to this. When shrinking a stack, we
put the old stack on a queue to be freed at the end of garbage
collection. This was done to address exactly this problem, but wasn't
a complete solution.
This commit generalizes this solution to both shrinking and growing
stacks. For stacks that fit in the stack pool, we simply don't free
the span, even if its reference count reaches zero. It's fine to reuse
the span for other stacks, and this enables that. At the end of GC, we
sweep for cached stack spans with a zero reference count and free
them. For larger stacks, we simply queue the stack span to be freed at
the end of GC. Ideally, we would reuse these large stack spans the way
we can small stack spans, but that's a more invasive change that will
have to wait until after the freeze.
Fixes#11267.
Change-Id: Ib7f2c5da4845cc0268e8dc098b08465116972a71
Reviewed-on: https://go-review.googlesource.com/11502
Reviewed-by: Russ Cox <rsc@golang.org>
We don't use this state. _GCoff means we're sweeping in the
background. This makes it clear in the next commit that _GCoff and
only _GCoff means sweeping.
Change-Id: I416324a829ba0be3794a6cf3cf1655114cb6e47c
Reviewed-on: https://go-review.googlesource.com/11501
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently the runtime fails to clear a G's stack barriers in gfput if
the G's stack allocation is _FixedStack bytes. This causes the runtime
to panic if the following sequence of events happens:
1) The runtime installs stack barriers on a G.
2) The G exits by calling runtime.Goexit. Since this does not
necessarily return through the stack barriers installed on the G,
there may still be untriggered stack barriers left on the G's stack
in recorded in g.stkbar.
3) The runtime calls gfput to add the exiting G to the free pool. If
the G's stack allocation is _FixedStack bytes, we fail to clear
g.stkbar.
4) A new G starts and allocates the G that was just added to the free
pool.
5) The new G begins to execute and overwrites the stack slots that had
stack barriers in them.
6) The garbage collector enters mark termination, attempts to remove
stack barriers from the new G, and finds that they've been
overwritten.
Fix this by clearing the stack barriers in gfput in the case where it
reuses the stack.
Fixes#11256.
Change-Id: I377c44258900e6bcc2d4b3451845814a8eeb2bcf
Reviewed-on: https://go-review.googlesource.com/11461
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Also improve the documentation. A prior fix in this release
changed the properties for empty strings and slices, incorrectly.
Previous behavior is now restored and better documented.
Add lots of tests.
The behavior is that when using a string-like format (%s %q %x %X)
a byte slice is equivalent to a string, and printed as a unit. The padding
applies to the entire object. (The space and sharp flags apply
elementwise.)
Fixes#11422.
Fixes#10430.
Change-Id: I758f0521caf71630437e43990ec6d6c9a92655e3
Reviewed-on: https://go-review.googlesource.com/11600
Reviewed-by: Russ Cox <rsc@golang.org>
TestTransportAndServerSharedBodyRace got flaky after
issue #9662 was fixed by https://golang.org/cl/11412, which made
servers hang up on clients when a Handler stopped reading its body
early.
This test was affected by a race between the the two goroutines in the
test both only reading part of the request, which was an unnecessary
detail for what the test was trying to test (concurrent Read/Close
races on an *http.body)
Also remove an unused remnant from an old test from which this one was
derived. And make the test not deadlock when it fails. (which was why
the test was showing up as 2m timeouts on the dashboard)
Fixes#11418
Change-Id: Ic83d18aef7e09a9cd56ac15e22ebed75713026cb
Reviewed-on: https://go-review.googlesource.com/11610
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
It looks like the test for whether symbols contain subsymbols is wrong.
In particular, symbols in C libraries are mistakenly considered container
symbols.
Fix the test so only symbols which actually have a subsymbol
are excluded from the symtab. When linking cgo programs the list
of containers is small, something like:
container _/home/khr/sandbox/symtab/misc/cgo/test(.text)<74>
container _/home/khr/sandbox/symtab/misc/cgo/test/issue8828(.text)<75>
container _/home/khr/sandbox/symtab/misc/cgo/test/issue9026(.text)<76>
container runtime/cgo(.text)<77>
I'm not sure this is the right fix. In particular I can't reproduce
the original problem. Anyone have a repro they can try and see if
this fix works?
Fixes#10747Fixes#11396
Change-Id: Id8b016389d33348b4a791fdcba0f9db8ae71ebf3
Reviewed-on: https://go-review.googlesource.com/11652
Reviewed-by: Russ Cox <rsc@golang.org>
Invalid UTF-8 triggers an error when marshaling but, previously, not
when unmarshaling. This means that ASN.1 structures were not
round-tripping.
This change makes invalid UTF-8 in a string marked as UTF-8 to be an
error when Unmarshaling.
Fixes#11126.
Change-Id: Ic37be84d21dc5c03983525e244d955a8b1e1ff14
Reviewed-on: https://go-review.googlesource.com/11056
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The time package does normalisation of times: for example day zero is
converted to the last day of the previous month and the 31st of February
is moved into March etc. This makes the ASN.1 parsing a little
worryingly lax.
This change causes the parser to reserialise parsed times to ensure that
they round-trip correctly and thus were not normalised.
Fixes#11134.
Change-Id: I3988bb95153a7b33d64ab861fbe51b1a34a359e9
Reviewed-on: https://go-review.googlesource.com/11094
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Stack can move during callback, so libcall struct cannot be stored on stack.
asmstdcall updates return values and errno in libcall struct parameter, but
these could be at different location when callback returns.
Store these in m, so they are not affected by GC.
Fixes#10406
Change-Id: Id01c9d2b4b44530494e6d9e9e1c875261ce477cd
Reviewed-on: https://go-review.googlesource.com/10370
Reviewed-by: Russ Cox <rsc@golang.org>
git sets read-only flag on all its repo files on Windows.
os.Remove cannot delete these files.
Fixes windows build
Change-Id: Icaf72470456b88a1c26295caecd4e0d3dc22a1b6
Reviewed-on: https://go-review.googlesource.com/11602
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
The race occurs rarely, but by putting some delays and more reads/writes
of prePendingDial/postPendingDial in the handlePendingDial function I
could reproduce it.
Fixes#11136
Change-Id: I8da9e66c88fbda049eaaaaffa2717264ef327768
Reviewed-on: https://go-review.googlesource.com/11250
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
AFAIK, the documentation does not explicitly state whether
variables can store a callable entity or not. I believe the
current implementation in text/template assumes they cannot
though. The call builtin function is supposed to be used for
this purpose.
Template "{{0|$}}" should generate an error at runtime,
instead of a panic.
Similarly, template "{{0|(nil)}}" should not generate
a panic.
This CL aborts the sanitization process for a given pipeline
when no identifier can be derived from the selected node.
It happens with malformed pipelines.
We now have the following errors:
{{ 0 | $ }}
template: foo:1:10: executing "foo" at <$>: can't give argument to non-function $
{{ 0 | (nil) }}
template: foo:1:11: executing "foo" at <nil>: nil is not a command
Fixes#11118Fixes#11356
Change-Id: Idae52f806849f4c9ab7aca1b4bb4b59a74723d0e
Reviewed-on: https://go-review.googlesource.com/10823
Reviewed-by: Rob Pike <r@golang.org>
Partial revert of cl/10284 to get -buildmode=c-archive working for
darwin/arm.
Manually tested with iostest.bash while builder is offline.
Change-Id: I98e4e209765666e320e680e11151fce59e2afde9
Reviewed-on: https://go-review.googlesource.com/11306
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Change createCmd, downloadCmd, tagSyncCmd, tagSyncDefault to allow
multiple commands.
When using the vendoring experiment, fetch git submodules in `go get`,
and update them in `go get -u`.
This is a reincarnation of https://codereview.appspot.com/142180043.
For #7764.
Change-Id: I8248efb851130620ef762a765ab8716af430572a
Reviewed-on: https://go-review.googlesource.com/9815
Reviewed-by: Russ Cox <rsc@golang.org>
cmd/go sometimes returns relative path in the error message
(see shortPath function). Account for that during
TestFileLineInErrorMessages.
Fixes#11355
Change-Id: Ica79359eab48d669d307449fdd458764895fab2c
Reviewed-on: https://go-review.googlesource.com/11475
Reviewed-by: Russ Cox <rsc@golang.org>
- Let runOutput return the error message
- When `git config ...` returns empty buffer, it means the config key is
correct, but there is no corresponding value.
- Return the correct error when the url of remote origin is not found.
- Update error message
Fixes: #10922
Change-Id: I3f8880f6717a4f079b840d1249174378d36bca1b
Reviewed-on: https://go-review.googlesource.com/10475
Reviewed-by: Russ Cox <rsc@golang.org>
Linux allows to have a peer IP address on IP interface over ethernet
link encapsulation, though it only installs a static route with the peer
address as an on-link nexthop.
Fixes#11338.
Change-Id: Ie2583737e4c7cec39baabb89dd732463d3f10a61
Reviewed-on: https://go-review.googlesource.com/11352
Reviewed-by: Russ Cox <rsc@golang.org>
Also add a couple more errors, such as modulo with a zero divisor.
Change-Id: If24c95477f7ae86cf4aef5b3460e9ec249ea5ae2
Reviewed-on: https://go-review.googlesource.com/11535
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, to write out the bitmap of a slice of a type with a GCprog,
we construct a new GCprog that executes the underlying type's GCprog
to write out the bitmap once and then repeats those bits n more times.
This results in n+1 repetitions of the bitmap, which is one more
repetition than it should be. This corrupts the bitmap of the heap
following the slice and may write past the mapped bitmap memory and
segfault.
Fix this by repeating the bitmap only n-1 more times.
Fixes#11430.
Change-Id: Ic24854363bffc5a755b66f257339f9309ada3aa5
Reviewed-on: https://go-review.googlesource.com/11570
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A comment in waitgroup.go describes the following scenario
as the reason to have dynamically created semaphores:
// G1: Add(1)
// G1: go G2()
// G1: Wait() // Context switch after Unlock() and before Semacquire().
// G2: Done() // Release semaphore: sema == 1, waiters == 0. G1 doesn't run yet.
// G3: Wait() // Finds counter == 0, waiters == 0, doesn't block.
// G3: Add(1) // Makes counter == 1, waiters == 0.
// G3: go G4()
// G3: Wait() // G1 still hasn't run, G3 finds sema == 1, unblocked! Bug.
However, the scenario is incorrect:
G3: Add(1) happens concurrently with G1: Wait(),
and so there is no reasonable behavior of the program
(G1: Wait() may or may not wait for G3: Add(1) which
can't be the intended behavior).
With this conclusion we can:
1. Remove dynamic allocation of semaphores.
2. Remove the mutex entirely and instead pack counter and waiters
into single uint64.
This makes the logic significantly simpler, both Add and Wait
do only a single atomic RMW to update the state.
benchmark old ns/op new ns/op delta
BenchmarkWaitGroupUncontended 30.6 32.7 +6.86%
BenchmarkWaitGroupActuallyWait 722 595 -17.59%
BenchmarkWaitGroupActuallyWait-2 396 319 -19.44%
BenchmarkWaitGroupActuallyWait-4 224 183 -18.30%
BenchmarkWaitGroupActuallyWait-8 134 106 -20.90%
benchmark old allocs new allocs delta
BenchmarkWaitGroupActuallyWait 2 1 -50.00%
benchmark old bytes new bytes delta
BenchmarkWaitGroupActuallyWait 48 16 -66.67%
Change-Id: I28911f3243aa16544e99ac8f1f5af31944c7ea3a
Reviewed-on: https://go-review.googlesource.com/4117
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This commit fixes a cosmetic defect whereby quick.Check reports that
the provided function returns too many values when it may, in fact,
return too few:
func f() {}
func TestFoo(t *testing.T) {
if err := quick.Check(f, nil); err != nil {
t.Fatal(err)
}
}
// yields
// $ go test -v foo_test.go
// === RUN TestFoo
// --- FAIL: TestFoo (0.00s)
// foo_test.go:76: function returns more than one value.
Change-Id: Ia209ff5b57375b30f8db425454e80798908e8ff4
Reviewed-on: https://go-review.googlesource.com/11281
Reviewed-by: Russ Cox <rsc@golang.org>
Not sure if I'm on time for 1.5; Unicode 8 just got released.
Straighforward upgrade. Only changed maketables.go to prevent it from adding
the Cherokee upper and lower case mappings. This change causes the caseOrbit
table to NOT change. Added tests to verify that the relevant functions still
produce the correct result, even for Cherokee.
Fixes#11309
Change-Id: I42850f5b3399bde125b002efc78eff96dbd86a08
Reviewed-on: https://go-review.googlesource.com/11286
Reviewed-by: Russ Cox <rsc@golang.org>
Removes the remains of the old C based stepflt implementation.
Also removed goto usage.
Change-Id: Ida4742c49000fae4fea4649f28afde630ce4c577
Reviewed-on: https://go-review.googlesource.com/9600
Reviewed-by: Russ Cox <rsc@golang.org>
The new inlined code for append assumed that it could pass the
desired new cap to growslice, not the number of new elements.
But growslice still interpreted the argument as the number of new elements,
making it always grow by >2x (more precisely, 2x+1 rounded up
to the next malloc block size). At the time, I had intended to change
the other callers to use the new cap as well, but it's too late for that.
Instead, introduce growslice_n for the old callers and keep growslice
for the inlined (common case) caller.
Fixes#11403.
Filed #11419 to merge them.
Change-Id: I1338b1e5b352f3be4e43641f44b652ef7195251b
Reviewed-on: https://go-review.googlesource.com/11541
Reviewed-by: Austin Clements <austin@google.com>
Includes a new net/http test too.
Fixes#11202
Change-Id: I61edc594f4de8eb6780b8dfa221269dd482e8f35
Reviewed-on: https://go-review.googlesource.com/11492
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
All other exported errors in net/http are commented. This change adds
documentation to ErrNoCookie and ErrNoLocation to explain where they are
returned, and why.
Change-Id: I21fa0d070dd35256681ad0714000f238477d4af1
Reviewed-on: https://go-review.googlesource.com/11044
Reviewed-by: Russ Cox <rsc@golang.org>
This adds a GC bitmap test of a type with many pointer bits and a
large scalar tail, such as the one in issue #11286. This test would
have failed prior to the fix in a8ae93f. This test is a more direct
version of the test introduced in that commit (which was distilled
from the failing test in the issue).
Change-Id: I2e716cd1000b49bde237f5da6d857e8983fe7e7a
Reviewed-on: https://go-review.googlesource.com/11423
Reviewed-by: Russ Cox <rsc@golang.org>
Currently we test bitmap repetitions constructed by the compiler (for
small arrays) and repetitions performed by GC programs (large arrays
and reflect-constructed arrays), but we don't test dynamic repetitions
performed by the runtime for slice backing stores. Add tests that
parallel the array tests using slices.
Change-Id: If4425941a33cc5b20178dd819a7371e347e47585
Reviewed-on: https://go-review.googlesource.com/11422
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The consecutive calls to Head would sometimes get different
connections depending on if the readLoop had finished executing
and placed its connection on the idle list or not. This change
ensures that readLoop completes before we make our second connection.
Fixes#11250
Change-Id: Ibdbc4d3d0aba0162452f6dec5928355a37dda70a
Reviewed-on: https://go-review.googlesource.com/11170
Reviewed-by: Russ Cox <rsc@golang.org>
The original version of applyRelocationsARM was added in
http://golang.org/cl/7266. It was added to fix the ARM build, which
had been broken by http://golang.org/cl/6780.
Before CL 6780, there was no relocation processing for ARM. CL 6780
changed the code to require relocation processing for every supported
target. CL 7266 fixed the ARM build by adding a relocation processing
function, but in fact no actual processing was done. The code only
looked for REL32 relocations, but ARM debug info has no such
relocations. The test case added in CL 7266 doesn't have any either.
This didn't matter because no relocation processing was required on
ARM, at least not for GCC-generated debug info. GCC generates ABS32
relocations, but only against section symbols which have the value 0.
Therefore, the addition done by correct handling of ABS32 doesn't
change anything.
Clang, however, generates ABS32 relocations against local symbols,
some of which have non-zero values. For those, we need to handle
ABS32 relocations.
This patch corrects the CL 7266 to look for ABS32 relocations instead
of REL32 relocations. The code was already written to correctly
handle ABS32 relocations, it just mistakenly said REL32.
This is the ARM equivalent of https://golang.org/cl/96680045, which
fixed the same problem in the same way for clang on 386.
With this patch, clang-3.5 can be used to build Go on ARM GNU/Linux.
Fixes#8980.
Change-Id: I0c2d72eadfe6373bde99cd03eee40de6a582dda1
Reviewed-on: https://go-review.googlesource.com/11222
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
If an encrypted PEM block contained ciphertext that was not a multiple
of the block size then the code would panic. This change tests for that
case and returns an error.
Fixes#11215.
Change-Id: I7b700f99e20810c4f545519b1e9d766b4640e8a7
Reviewed-on: https://go-review.googlesource.com/11097
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
In walkdiv, an OMUL node was created and passed to typecheck,
before the op was changed back to OHMUL. In some instances,
the node that came back was an evaluated literal constant that
occurred with a full multiply. The end result was a literal node
with a non-shifted value and an OHMUL op. This change causes code
to be generated for the OHMUL.
Fixes#11358Fixes#11369
Change-Id: If42a98c6830d07fe065d5ca57717704fb8cfbd33
Reviewed-on: https://go-review.googlesource.com/11400
Reviewed-by: Russ Cox <rsc@golang.org>
Instrument operands of OKEY.
Also instrument OSLICESTR. Previously it was not needed
because of preceeding bounds checks (which were instrumented).
But the preceeding bounds checks have disappeared.
Change-Id: I3b0de213e23cbcf5b8ef800abeded5eeeb3f8287
Reviewed-on: https://go-review.googlesource.com/11417
Reviewed-by: Russ Cox <rsc@golang.org>
The issue was identified while
working with round trip FileInfo of the headers of hardlinks. Also,
additional test cases for hard link handling.
(review carried over from http://golang.org/cl/165860043)
Fixes#9027
Change-Id: I9e3a724c8de72eb1b0fbe0751a7b488894911b76
Reviewed-on: https://go-review.googlesource.com/6790
Reviewed-by: Russ Cox <rsc@golang.org>
Some old buggy browsers sent extra CRLF(s) after POST bodies. Skip
over them before reading subsequent requests.
Fixes#10876
Change-Id: I62eacf2b3e985caffa85aee3de39d8cd3548130b
Reviewed-on: https://go-review.googlesource.com/11491
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
At some point it silently stopped recognizing test output.
Meanwhile two tests degraded...
Change-Id: I90a0325fc9aaa16c3ef16b9c4c642581da2bb10c
Reviewed-on: https://go-review.googlesource.com/11416
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If a client sent a POST with a huge request body, calling
req.Body.Close in the handler (which is implicit at the end of a
request) would end up consuming it all.
Put a cap on that, using the same threshold used elsewhere for similar
cases.
Fixes#9662
Change-Id: I26628413aa5f623a96ef7c2609a8d03c746669e5
Reviewed-on: https://go-review.googlesource.com/11412
Reviewed-by: Andrew Gerrand <adg@golang.org>
Negative width arguments now left align the way a minus-width in the
format string aligns. The minus in the format string overrides the sign
of the argument as in C.
Precision behavior is modified to include an error if the argument is
negative. This differs from a negative precision in a format string
which just terminates the format.
Additional checks for large magnitude widths and precisions are added to
make the runtime behavior (failure, but with different error messages),
more consistent between format string specified width/precision and
argument specified width/precision.
Fixes#11376
Change-Id: I8c7ed21088e9c18128a45d4c487c5ab9fafd13ef
Reviewed-on: https://go-review.googlesource.com/11405
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
Instead of ambiguously referring to "the Client's CheckRedirect
function" in Head, describe the default behavior like for Get as users
aren't expected to change DefaultClient.CheckRedirect.
While here, use consistent punctuation for the Get and Head Client
method documentation.
Change-Id: I9e7046c73b0d0bc4de002234924d9e7c59aceb41
Reviewed-on: https://go-review.googlesource.com/11362
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The ListenAndServerTLS function still requires the certFile and
keyFile, but the Server.ListenAndServerTLS method doesn't need to
require the certFile and keyFile if the Server.TLSConfig.Certificates
are already populated.
Fixes#8599
Change-Id: Id2e3433732f93e2619bfd78891f775d89f1d651e
Reviewed-on: https://go-review.googlesource.com/11413
Reviewed-by: Andrew Gerrand <adg@golang.org>
For debuggers and other program inspectors.
Fixes#9914.
Change-Id: I670728cea28c045e6eaba1808c550ee2f34d16ff
Reviewed-on: https://go-review.googlesource.com/11341
Reviewed-by: Austin Clements <austin@google.com>
The code formatting mechanism can be applied to partial Go code,
such as a list of statements. The statements are wrapped into a
function definition (to be parsed fine), and unwrapped after formatting.
When the statements contain //line annotations, it may fail,
because not all comments are flushed by the printer before the final '}'.
Formatting "\ta()\n//line :1" results in "\ta() }\n\n//line", which
is wrong.
Tweaked the wrapping/unwrapping code to make sure comments are flushed
before the '}'.
Fixes#11276
Change-Id: Id15c80279b0382ee9ed939cca1647f525c4929f5
Reviewed-on: https://go-review.googlesource.com/11282
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The test is flaky on builders lately. I don't see any issues other than
usage of very small sleeps. So increase the sleeps. Also take opportunity
to refactor the code.
On my machine this change significantly reduces failure rate with GOMAXPROCS=2.
I can't reproduce the failure with GOMAXPROCS=1.
Fixes#10726
Change-Id: Iea6f10cf3ce1be5c112a2375d51c13687a8ab4c9
Reviewed-on: https://go-review.googlesource.com/9803
Reviewed-by: Austin Clements <austin@google.com>
To date, the behavior has depended on whether we're using cgo and
in turn what the host resolver does. Most host resolvers will "resolve"
IP addresses, but the non-cgo pure Go path has not.
This CL makes resolution of IP addresses always work, even if we're not using cgo
and even if the host resolver does not "resolve" IP addresses.
Fixes#11335.
Change-Id: I19e82be968154d94904bb2f72e9c17893019a909
Reviewed-on: https://go-review.googlesource.com/11420
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When heapBitsSetType repeats a source bitmap with a scalar tail
(typ.ptrdata < typ.size), it lays out the tail upon reaching the end
of the source bitmap by simply increasing the number of bits claimed
to be in the incoming bit buffer. This causes later iterations to read
the appropriate number of zeros out of the bit buffer before starting
on the next repeat of the source bitmap.
Currently, however, later iterations of the loop continue to read bits
from the source bitmap *regardless of the number of bits currently in
the bit buffer*. The bit buffer can only hold 32 or 64 bits, so if the
scalar tail is large and the padding bits exceed the size of the bit
buffer, the read from the source bitmap on the next iteration will
shift the incoming bits into oblivion when it attempts to put them in
the bit buffer. When the buffer does eventually shift down to where
these bits were supposed to be, it will contain zeros. As a result,
words that should be marked as pointers on later repetitions are
marked as scalars, so the garbage collector does not trace them. If
this is the only reference to an object, it will be incorrectly freed.
Fix this by adding logic to drain the bit buffer down if it is large
instead of reading more bits from the source bitmap.
Fixes#11286.
Change-Id: I964432c4b9f1cec334fc8c3da0ff16460203feb6
Reviewed-on: https://go-review.googlesource.com/11360
Reviewed-by: Russ Cox <rsc@golang.org>
h_spans can be accessed concurrently without synchronization from
other threads, which means it needs the appropriate memory barriers on
weakly ordered machines. It happens to already have the necessary
memory barriers because all accesses to h_spans are currently
protected by the heap lock and the unlocks happen in exactly the
places where release barriers are needed, but it's easy to imagine
that this could change in the future. Document the fact that we're
depending on the barrier implied by the unlock.
Related to issue #9984.
Change-Id: I1bc3c95cd73361b041c8c95cd4bb92daf8c1f94a
Reviewed-on: https://go-review.googlesource.com/11361
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
There are two conditions to worry about:
1) The shift count cannot be negative. Since the evaluator uses unsigned
arithmetic throughout, this means checking that the high bit of
the shift count is always off, which is done by converting to int64
and seeing if the result is negative.
2) For right shifts, the value cannot be negative. We don't want a
high bit in the value because right shifting a value depends on the
sign, and for clarity we always want unsigned shifts.
Next step is to build some testing infrastructure for the parser.
Change-Id: I4c46c79989d02c107fc64954403fc18613763f1d
Reviewed-on: https://go-review.googlesource.com/11326
Reviewed-by: Russ Cox <rsc@golang.org>
It was otherwise not being preserved across
specific Decode->Encode->Decode calls.
Fixes#11287
Change-Id: I40602da7fa39ec67403bed52ff403f361c6171bb
Reviewed-on: https://go-review.googlesource.com/11256
Reviewed-by: Nigel Tao <nigeltao@golang.org>
This appears to be some legacy which is no longer used.
Change-Id: I469beb59a90853e8de910158f179b32f1aa14c7d
Reviewed-on: https://go-review.googlesource.com/11304
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
Some of those consts were supposed to be vars.
Caught by Ingo Oeser.
Change-Id: Ifc12e4a8ee61ebf5174e4ad923956c546dc096e2
Reviewed-on: https://go-review.googlesource.com/11296
Reviewed-by: Andrew Gerrand <adg@golang.org>
The change that "fixed" LSH was incorrect, and the fix for RSH was poor.
Make both use a correct, simple test: if the 64-bit value as a signed
integer is negative, it's an error.
Really fixes#11278.
Change-Id: I72cca03d7ad0d64fd649fa33a9ead2f31bd2977b
Reviewed-on: https://go-review.googlesource.com/11325
Reviewed-by: Andrew Gerrand <adg@golang.org>
And vice versa.
The flags are tightly coupled so make the connection clear.
Change-Id: I505f76be631ffa6e489a441c2f3c717aa09ec802
Reviewed-on: https://go-review.googlesource.com/11324
Reviewed-by: Andrew Gerrand <adg@golang.org>
This CL removes the single and racy use of mheap.arena_end outside
of the bookkeeping done in mHeap_init and mHeap_Alloc.
There should be no way for heapBitsForSpan to see a pointer to
an invalid span. This CL makes the check for this more precise by
checking that the pointer is between mheap_.arena_start and
mheap_.arena_used instead of mheap_.arena_end.
Change-Id: I1200b54353ee1eda002d92645fd8d26048600ceb
Reviewed-on: https://go-review.googlesource.com/11342
Reviewed-by: Austin Clements <austin@google.com>
In order to avoid a race with a concurrent write barrier or garbage
collector thread, any update to arena_used must be preceded by mapping
the corresponding heap bitmap and spans array memory. Otherwise, the
concurrent access may observe that a pointer falls within the heap
arena, but then attempt to access unmapped memory to look up its span
or heap bits.
Commit d57c889 fixed all of the places where we updated arena_used
immediately before mapping the heap bitmap and spans, but it missed
the one place where we update arena_used and depend on later code to
update it again and map the bitmap and spans. This creates a window
where the original race can still happen. This commit fixes this by
mapping the heap bitmap and spans before this arena_used update as
well. This code path is only taken when expanding the heap reservation
on 32-bit over a hole in the address space, so these extra mmap calls
should have negligible impact.
Fixes#10212, #11324.
Change-Id: Id67795e6c7563eb551873bc401e5cc997aaa2bd8
Reviewed-on: https://go-review.googlesource.com/11340
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The unsynchronized accesses to mheap_.arena_used in the concurrent
part of the garbage collector look like a problem waiting to happen.
In fact, they are safe, but the reason is somewhat subtle and
undocumented. This commit documents this reasoning.
Related to issue #9984.
Change-Id: Icdbf2329c1aa11dbe2396a71eb5fc2a85bd4afd5
Reviewed-on: https://go-review.googlesource.com/11254
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Historically we have declined to try to provide real support for URLs
that contain %2F in the path, but they seem to be popping up more
often, especially in (arguably ill-considered) REST APIs that shoehorn
entire paths into individual path elements.
The obvious thing to do is to introduce a URL.RawPath field that
records the original encoding of Path and then consult it during
URL.String and URL.RequestURI. The problem with the obvious thing
is that it breaks backward compatibility: if someone parses a URL
into u, modifies u.Path, and calls u.String, they expect the result
to use the modified u.Path and not the original raw encoding.
Split the difference by treating u.RawPath as a hint: the observation
is that there are many valid encodings of u.Path. If u.RawPath is one
of them, use it. Otherwise compute the encoding of u.Path as before.
If a client does not use RawPath, the only change will be that String
selects a different valid encoding sometimes (the original passed
to Parse).
This ensures that, for example, HTTP requests use the exact
encoding passed to http.Get (or http.NewRequest, etc).
Also add new URL.EscapedPath method for access to the actual
escaped path. Clients should use EscapedPath instead of
reading RawPath directly.
All the old workarounds remain valid.
Fixes#5777.
Might help #9859.
Fixes#7356.
Fixes#8767.
Fixes#8292.
Fixes#8450.
Fixes#4860.
Fixes#10887.
Fixes#3659.
Fixes#8248.
Fixes#6658.
Reduces need for #2782.
Change-Id: I77b88f14631883a7d74b72d1cf19b0073d4f5473
Reviewed-on: https://go-review.googlesource.com/11302
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The test was translated from shell incorrectly,
and it depended on having hg installed, which
may not be the case.
Moved repo to GitHub, updated code, and fixed
go list ... command to be expected to succeed.
Fixes test for #8181.
Change-Id: I7f3e8fb20cd16cac5ed24de6fd952003bc5e08d4
Reviewed-on: https://go-review.googlesource.com/11301
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the parser, the shift value is always a uint64.
Change-Id: I9b50295a9f7d174ed1f6f9baf78ec0ed43db417f
Reviewed-on: https://go-review.googlesource.com/11322
Reviewed-by: Andrew Gerrand <adg@golang.org>
A header of ": value" results in an empty key. Do not add
it to the headers, because RFC7230 (section 3.2) says that
field-names are tokens, which are one or more characters.
Fixes#11205.
Change-Id: I883be89da1489dc84f98523786b019d1d0169d46
Reviewed-on: https://go-review.googlesource.com/11242
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Most important: skip test on darwin/arm64 for unclear reasons.
First cut at the test missed this feature of go doc: when asking for
the docs for a type, include any function that looks like it constructs
a that type as a return value.
Change-Id: I124e7695e5d365e2b12524b541a9a4e6e0300fbc
Reviewed-on: https://go-review.googlesource.com/11295
Reviewed-by: Rob Pike <r@golang.org>
Some Linux kernels apparently have a sysctl that prohibits
nonprivileged processes from creating user namespaces. If we see a
failure for that reason, skip the test.
Fixes#11261.
Change-Id: I82dfcaf475eea4eaa387941373ce7165df4848ad
Reviewed-on: https://go-review.googlesource.com/11269
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
nacl is really giving a hard time. avoid all external dependencies in the test.
Worked with trybots, failed in the build. No explanation, but this should fix it.
TBR=rsc
Change-Id: Icb644286dbce88f17ee3d96ad90efba34a80a92d
Reviewed-on: https://go-review.googlesource.com/11291
Reviewed-by: Rob Pike <r@golang.org>
Refactor main a bit to make it possible to run tests without an exec every time.
(Makes a huge difference in run time.)
Add a silver test. Not quite golden, since it looks for pieces rather than the
full output, and also includes tests for what should not appear.
Fixes#10920.
Change-Id: I6a4951cc14e61763379754a10b0cc3484d30c267
Reviewed-on: https://go-review.googlesource.com/11272
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
All of the heavy-lifting was done by minux@, with his external-linking support
for darwin/arm64: golang.org/cl/8781
Change-Id: I7c9fbc19246f418c065c92fb2c13c00026ff0f82
Reviewed-on: https://go-review.googlesource.com/11127
Run-TryBot: Srdjan Petrovic <spetrovic@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When GO15VENDOREXPERIMENT=1 is in the environment,
this CL changes the resolution of import paths according to
the Go 1.5 vendor proposal:
If there is a source directory d/vendor, then,
when compiling a source file within the subtree rooted at d,
import "p" is interpreted as import "d/vendor/p" if that exists.
When there are multiple possible resolutions,
the most specific (longest) path wins.
The short form must always be used: no import path can
contain “/vendor/” explicitly.
Import comments are ignored in vendored packages.
The goal of these changes is to allow authors to vendor (copy) external
packages into their source trees without any modifications to the code.
This functionality has been achieved in tools like godep, nut, and gb by
requiring GOPATH manipulation. This alternate directory-based approach
eliminates the need for GOPATH manipulation and in keeping with the
go command's use of directory layout-based configuration.
The flag allows experimentation with these vendoring semantics once
Go 1.5 is released, without forcing them on by default. If the experiment
is deemed a success, the flag will default to true in Go 1.6 and then be
removed in Go 1.7.
For more details, see the original proposal by Keith Rarick at
https://groups.google.com/d/msg/golang-dev/74zjMON9glU/dGhnoi2IMzsJ.
Change-Id: I2c6527e777d14ac6dc43c53e4b3ff24f3279216e
Reviewed-on: https://go-review.googlesource.com/10923
Reviewed-by: Andrew Gerrand <adg@golang.org>
The -importmap option takes an argument of the form old=new
and specifies that import "old" should be interpreted as if it said
import "new". The option may be repeated to specify multiple mappings.
This option is here to support the go command's new -vendor flag.
Change-Id: I31b4ed4249b549982a720bf61bb230462b33c59b
Reviewed-on: https://go-review.googlesource.com/10922
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently its possible for the garbage collector to observe
uninitialized memory or stale heap bitmap bits on weakly ordered
architectures such as ARM and PPC. On such architectures, the stores
that zero newly allocated memory and initialize its heap bitmap may
move after a store in user code that makes the allocated object
observable by the garbage collector.
To fix this, add a "publication barrier" (also known as an "export
barrier") before returning from mallocgc. This is a store/store
barrier that ensures any write done by user code that makes the
returned object observable to the garbage collector will be ordered
after the initialization performed by mallocgc. No barrier is
necessary on the reading side because of the data dependency between
loading the pointer and loading the contents of the object.
Fixes one of the issues raised in #9984.
Change-Id: Ia3d96ad9c5fc7f4d342f5e05ec0ceae700cd17c8
Reviewed-on: https://go-review.googlesource.com/11083
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Martin Capitanio <capnm9@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
These tests were broken by https://go-review.googlesource.com/#/c/11227/
which fixed the LZW encoder to reject invalid input.
For TestNoPalette, the LZW encoder with a litWidth of 2 now rejects an
input byte of 128, so we change 128 to 3, as 3 <= (1<<2 - 1).
For TestPixelOutsidePaletteRange, the LZW encoder similarly rejects an
input byte of 255. Prior to golang.org/cl/11227, the encoder (again with
a litWidth of 2) accepted the 255 input byte, but masked it with (1<<2 -
1), so that the 255 test case was effectively the same as the 3 test
case. After that LZW CL, the 255 input byte is simply invalid, so we
remove it as a test case. The test still tests pixels outside of the
palette range, since 3 >= the length of the global palette, which is 2.
Change-Id: I50be9623ace016740e34801549c15f83671103eb
Reviewed-on: https://go-review.googlesource.com/11273
Reviewed-by: David Symonds <dsymonds@golang.org>
This is a documentation fix that reflects the current reality.
Fixes#9673.
Change-Id: Ie436b277dfd1b68b13c67813d29c238d2c23b820
Reviewed-on: https://go-review.googlesource.com/11221
Reviewed-by: Russ Cox <rsc@golang.org>
Indent the temporary file source code embedded in go_test.go, so that
we don't have temporary Go code in the first column.
No real changes to the tests, just formatting.
Change-Id: I416b4a812c8db452ea61afe63a00989ec598c228
Reviewed-on: https://go-review.googlesource.com/10926
Reviewed-by: Russ Cox <rsc@golang.org>
Spell out what will happen if a declaration and definition is included
in the same file, should help people who run into duplicate symbol
errors and search for relevant keywords.
This edit is based on opening issue #11263 erroneously.
Change-Id: I0645a9433b8668d2ede9b9a3f6550d802c26388b
Reviewed-on: https://go-review.googlesource.com/11247
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A frame that tries to use the global palette when it has
not been given should result in an error, not an image
with no palette at all.
Fixes#11150.
Change-Id: If0c3a201a0ac977eee2b7a5dc68930c0c5787f40
Reviewed-on: https://go-review.googlesource.com/11064
Reviewed-by: Nigel Tao <nigeltao@golang.org>
Add sentences to the docs explaining the limit on input
bytes implicit in the choice of litWidth, and the fact that
compress and decompress litWidth must match.
Fixes#11142.
Change-Id: I20cfb4df35739f7bfeb50b92c78249df3d47942c
Reviewed-on: https://go-review.googlesource.com/11063
Reviewed-by: Nigel Tao <nigeltao@golang.org>
Some latency regressions have crept into our system over the past few
weeks. This CL fixes those by having the mark phase more aggressively
blacken objects so that the mark termination phase, a STW phase, has less
work to do. Three approaches were taken when the mark phase believes
it has no more work to do, ie all the work buffers are empty.
If things have gone well the mark phase is correct and there is
in fact little or no work. In that case the following items will
take very little time. If the mark phase is wrong this CL will
ferret that work out and give the mark phase a chance to deal with
it concurrently before mark termination begins.
When the mark phase first appears to be out of work, it does three things:
1) It switches from allocating white to allocating black to reduce the
number of unmarked objects reachable only from stacks.
2) It flushes and disables per-P GC work caches so all work must be in
globally visible work buffers.
3) It rescans the global roots---the BSS and data segments---so there
are fewer objects to blacken during mark termination. We do not rescan
stacks at this point, though that could be done in a later CL.
After these steps, it again drains the global work buffers.
On a lightly loaded machine the garbage benchmark has reduced the
number of GC cycles with latency > 10 ms from 83 out of 4083 cycles
down to 2 out of 3995 cycles. Maximum latency was reduced from
60+ msecs down to 20 ms.
Change-Id: I152285b48a7e56c5083a02e8e4485dd39c990492
Reviewed-on: https://go-review.googlesource.com/10590
Reviewed-by: Austin Clements <austin@google.com>
When a method is called using the Type.Method(receiver, args...) syntax
without the receiver, or enough arguments, provide the more helpful
error message "not enough arguments in call to method expression
Type.Method" instead of the old message "not enough arguments in call
to Type.Method".
Fixes#8385
Change-Id: Id5037eb1ee5fa93687d4a6557b4a8233b29e9df2
Reviewed-on: https://go-review.googlesource.com/2193
Reviewed-by: Russ Cox <rsc@golang.org>
It's easy for someone who wants a time bigger than any
valid time to reach for time.Unix(1<<63-1, 0), so it
makes sense to explicit say such value is not valid.
Fixes#10906 (again).
Change-Id: If71e32472ae40d86c30e629b982406040a73c4c7
Reviewed-on: https://go-review.googlesource.com/10266
Reviewed-by: Russ Cox <rsc@golang.org>
The Slicing-By-8 [1] algorithm has much performance improvements than
current approach. This patch only uses it for IEEE, which is the most
common case in practice.
There is the benchmark on Mac OS X 10.9:
benchmark old MB/s new MB/s speedup
BenchmarkIEEECrc1KB 349.40 353.03 1.01x
BenchmarkIEEECrc4KB 351.55 934.35 2.66x
BenchmarkCastagnoliCrc1KB 7037.58 7392.63 1.05x
This algorithm need 8K lookup table, so it's enabled only for block
larger than 4K.
We can see about 2.6x improvement for IEEE.
Change-Id: I7f786d20f0949245e4aa101d7921669f496ed0f7
Reviewed-on: https://go-review.googlesource.com/1863
Reviewed-by: Russ Cox <rsc@golang.org>
Check that if a version is declared, for example
in '<?xml version="XX" ?>', version must be '1.0'.
Change-Id: I16ba9f78873a5f31977dcf75ac8e671fe6c08280
Reviewed-on: https://go-review.googlesource.com/8961
Reviewed-by: Russ Cox <rsc@golang.org>
When the scanner receives a non-whitespace character in stateEndTop,
it creates an error message and caches it to return on the next
transition. nextValue() uses the scanner to sub-scan for a value
inside a larger JSON structure. Since stateEndTop is triggered
*after* the ending byte, whatever character immediately follows the
sub-value gets pulled into the scanner's state machine as well.
Even though it is not used and doesn't cause an error, it does
cause the state machine to allocate an error that will never be used.
The fix is to probe the state machine with whitespace after
scanEndObject or scanEndArray to see if the next character would
result in a scanEnd state transition. If so, we can return right
away without processing the next character and avoid triggering
an allocation.
benchmark old ns/op new ns/op delta
BenchmarkCodeEncoder 17022194 16611336 -2.41%
BenchmarkCodeMarshal 18443250 18090144 -1.91%
BenchmarkCodeDecoder 61502053 61010936 -0.80%
BenchmarkCodeUnmarshal 61410829 60363605 -1.71%
BenchmarkCodeUnmarshalReuse 59124836 58361772 -1.29%
BenchmarkUnmarshalString 602 603 +0.17%
BenchmarkUnmarshalFloat64 535 537 +0.37%
BenchmarkUnmarshalInt64 482 482 +0.00%
BenchmarkIssue10335 1206 799 -33.75%
BenchmarkSkipValue 17605751 18355391 +4.26%
BenchmarkEncoderEncode 612 604 -1.31%
benchmark old MB/s new MB/s speedup
BenchmarkCodeEncoder 114.00 116.82 1.02x
BenchmarkCodeMarshal 105.21 107.27 1.02x
BenchmarkCodeDecoder 31.55 31.81 1.01x
BenchmarkCodeUnmarshal 31.60 32.15 1.02x
BenchmarkSkipValue 111.63 107.07 0.96x
benchmark old allocs new allocs delta
BenchmarkIssue10335 11 4 -63.64%
BenchmarkEncoderEncode 2 2 +0.00%
benchmark old bytes new bytes delta
BenchmarkIssue10335 376 272 -27.66%
BenchmarkEncoderEncode 40 40 +0.00%
Fixes#10335
Change-Id: I3d4f2b67f7a038adfb33ba48bb6b680f528baf18
Reviewed-on: https://go-review.googlesource.com/9074
Reviewed-by: Russ Cox <rsc@golang.org>
Suggest running 'go help gopath' when the running 'go install .'
and the folder is outside of GOPATH.
Added link to 'https://golang.org/doc/code.html' in gopath help
for more information.
Example output:
% go install .
go install: no install location for directory f:\x\badmessage outside GOPATH
please run 'go help gopath' for more information
% go help gopath
... SNIP ...
See https://golang.org/doc/code.html for an example.
Fixes#8457
Change-Id: I0ef6ee3c65bb12af2168eafeb757258aa3835664
Reviewed-on: https://go-review.googlesource.com/9258
Reviewed-by: Russ Cox <rsc@golang.org>
Check for errors when reading the headers following the pax headers.
Fixes#11169.
Change-Id: Ifec4a949ec8df8b49fa7cb7a67eb826fe2282ad8
Reviewed-on: https://go-review.googlesource.com/11031
Reviewed-by: Russ Cox <rsc@golang.org>
Return a meaningful message when a profile is empty.
Also rename "IO blocking" to "Network blocking",
currently only network blocking is captured.
Fixes#11098
Change-Id: Ib6f1292b8ade4805756fcb6696ba1fca8f9f39a9
Reviewed-on: https://go-review.googlesource.com/11243
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There were two issues.
1. Delayed EvGoSysExit could have been emitted during TraceStart,
while it had not yet emitted EvGoInSyscall.
2. Delayed EvGoSysExit could have been emitted during next tracing session.
Fixes#10476Fixes#11262
Change-Id: Iab68eb31cf38eb6eb6eee427f49c5ca0865a8c64
Reviewed-on: https://go-review.googlesource.com/9132
Reviewed-by: Russ Cox <rsc@golang.org>
All the other error messages in this package are "lzw: etc".
Change-Id: Ie359a8912d213f92b15f02abc953127380503048
Reviewed-on: https://go-review.googlesource.com/11228
Reviewed-by: David Symonds <dsymonds@golang.org>
In preparation for rename of cgocall_errno into cgocall and
asmcgocall_errno into asmcgocall in the fllowinng CL.
rsc requested CL 9387 to be split into two parts. This is first part.
Change-Id: I7434f0e4b44dd37017540695834bfcb1eebf0b2f
Reviewed-on: https://go-review.googlesource.com/11166
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Work-around issue #11265 and re-enable tests for Plan9.
Change-Id: I3aabb674a149b8eb936f948dd4cda5fd81454646
Reviewed-on: https://go-review.googlesource.com/11194
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change will brake the build. The immediately following change
contains the necessary adjustments to make it work again. We're
doing this in two steps to expose the manual changes applied.
Change-Id: I225947da23e190b12e12cbd0c5e6e91628de7f53
Reviewed-on: https://go-review.googlesource.com/11151
Reviewed-by: Alan Donovan <adonovan@google.com>
This fixes a hang during runtime.TestTraceStress.
It also fixes double-scan of stacks, which leads to
stack barrier installation failures.
Both of these have shown up as flaky failures on the dashboard.
Fixes#10941.
Change-Id: Ia2a5991ce2c9f43ba06ae1c7032f7c898dc990e0
Reviewed-on: https://go-review.googlesource.com/11089
Reviewed-by: Austin Clements <austin@google.com>
//go:systemstack means that the function must run on the system stack.
Add one use in runtime as a demonstration.
Fixes#9174.
Change-Id: I8d4a509cb313541426157da703f1c022e964ace4
Reviewed-on: https://go-review.googlesource.com/10840
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
I updated some references to 6g, 6l and friends that I came across, as those
programs don't exist anymore. I also fixed some echos in make.rc to match other make.* scripts while I was there.
Change-Id: Ib84532cd4688cf65174dd9869e5d42af98a20a48
Reviewed-on: https://go-review.googlesource.com/11162
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Corrected several issues:
* RFC1951 section 3.2.7 dictates that it is okay for the HDist tree to have a
single code of zero bits. Furthermore, the behavior of the C zlib library
permits empty trees even when there are more than one codes.
* RFC1951 section 3.2.5 shows that HLit codes 286 and 287 are invalid. Thus,
Go's implementation should choke on inputs using these codes.
* RFC1951 section 3.2.5 and 3.2.7 are ambiguous about whether the number of
HDist codes can be greater than 30. The C zlib library (which is the canonical
reference implementation) performs this check here:
62d6112a79/inflate.c (L906)
In addition, a number of test cases were added to the unit tests that exercises
these edge cases. The test cases listed in TestStreams will either fail or
succeed in a manner matching the behaviour of the C zlib version. Given that the
C zlib implementation is the reference for the world, Go's implementation should
match C zlib behaviour.
Fixes#11030
Change-Id: Ic24e4e40ce5832c7e1930249246e86d34bfedaa6
Reviewed-on: https://go-review.googlesource.com/11000
Reviewed-by: Nigel Tao <nigeltao@golang.org>
Also modified test/run.go to ignore messages prefixed <autogenerated>
because those cannot be described with "// ERROR ...", and backed out
patch from issue #9537 because it is no longer necessary. The reasons
described in the 9537 discussion for why escape analysis cannot run
late no longer hold, happily.
Fixes#11053.
Change-Id: Icb14eccdf2e8cde3d0f8fb8a216b765400a96385
Reviewed-on: https://go-review.googlesource.com/11088
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
This change reintroduces CL 8523. CL 8523 was reverted because
it broke darwin and netbsd builds. Now that this test is part
of "go tool dist test" command we could skip OSes that fail.
Updates #10360
Change-Id: Iaaeb5b800126492f36415a439c333a218fe4ab67
Reviewed-on: https://go-review.googlesource.com/11119
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
So the tests don't interfere with each other on windows.
Fixes#11217
Change-Id: I4b3936bc64c95c7274298d6f137b24a28876b625
Reviewed-on: https://go-review.googlesource.com/11138
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change allows LookupAddr to use getnameinfo through cgo for working
together with various name services other than DNS.
Fixes#7855.
Change-Id: I5b3b4aefe3d1b904541c3350865734d8cbb1c1c4
Reviewed-on: https://go-review.googlesource.com/3420
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This flag is not needed in the std repo because we don't have
tests requiring it. Remove it before it's frozen into the API.
Change-Id: I18b861eea146ad67e7a3c26ee8be681d8065ef12
Reviewed-on: https://go-review.googlesource.com/11150
Reviewed-by: Alan Donovan <adonovan@google.com>
This makes the behaviour match what happens when duplicate symbols are read
from regular object files and fixes errors about cgoAlwaysFalse when linking
an executable that uses cgo against a shared library.
Change-Id: Ibb8cd8fe3f7813cde504b7483f1e857868d7e063
Reviewed-on: https://go-review.googlesource.com/11117
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestHostname was re-enabled in CL 10753.
However, on Plan 9 the hostname is not obtained
by executing a "hostname" command, but by reading
the #c/sysname file.
Change-Id: I80c0e303f4983fe39ceb300ad64e2c4a8392b695
Reviewed-on: https://go-review.googlesource.com/11033
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, when shrinkstack computes whether the halved stack
allocation will have enough room for the stack, it accounts for the
stack space that's actively in use but fails to leave extra room for
the stack guard space. As a result, *if* the minimum stack size is
small enough or the guard large enough, it may shrink the stack and
leave less than enough room to run nosplit functions. If the next
function called after the stack shrink is a nosplit function, it may
overflow the stack without noticing and overwrite non-stack memory.
We don't think this is happening under normal conditions right now.
The minimum stack allocation is 2K and the guard is 640 bytes. The
"worst case" stack shrink is from 4K (4048 bytes after stack barrier
array reservation) to 2K (2016 bytes after stack barrier array
reservation), which means the largest "used" size that will qualify
for shrinking is 4048/4 - 8 = 1004 bytes. After copying, that leaves
2016 - 1004 = 1012 bytes of available stack, which is significantly
more than the guard space.
If we were to reduce the minimum stack size to 1K or raise the guard
space above 1012 bytes, the logic in shrinkstack would no longer leave
enough space.
It's also possible to trigger this problem by setting
firstStackBarrierOffset to 0, which puts stack barriers in a debug
mode that steals away *half* of the stack for the stack barrier array
reservation. Then, the largest "used" size that qualifies for
shrinking is (4096/2)/4 - 8 = 504 bytes. After copying, that leaves
(2096/2) - 504 = 8 bytes of available stack; much less than the
required guard space. This causes failures like those in issue #11027
because func gc() shrinks its own stack and then immediately calls
casgstatus (a nosplit function), which overflows the stack and
overwrites a free list pointer in the neighboring span. However, since
this seems to require the special debug mode, we don't think it's
responsible for issue #11027.
To forestall all of these subtle issues, this commit modifies
shrinkstack to correctly account for the guard space when considering
whether to halve the stack allocation.
Change-Id: I7312584addc63b5bfe55cc384a1012f6181f1b9d
Reviewed-on: https://go-review.googlesource.com/10714
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Issues #10240, #10541, #10941, #11023, #11027 and possibly others are
indicating memory corruption in the runtime. One of the easiest places
to both get corruption and detect it is in the allocator's free lists
since they appear throughout memory and follow strict invariants. This
commit adds a check when sweeping a span that its free list is sane
and, if not, it prints the corrupted free list and panics. Hopefully
this will help us collect more information on these failures.
Change-Id: I6d417bcaeedf654943a5e068bd76b58bb02d4a64
Reviewed-on: https://go-review.googlesource.com/10713
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
The motivation of TestLookupHost was to test codepaths on LookupHost,
LookupIP when we set CGO_ENABLED=1. Now we have serveral tests on those
APIs and their codepaths such as TestLookupGooglePublicDNSAddr,
TestCgoLookupIP, TestGoLookupIP, and the test using the ambiguous source
"localhost" is unnecessary.
Fixes#11182.
Change-Id: I397c823e1648114d91a229b316477bff2948b4f9
Reviewed-on: https://go-review.googlesource.com/11057
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Sadly examples cannot use the new internal/testenv, so this is
extends the crude build tag restriction in this file.
Change-Id: I49646ca71e45074a917813ae8e612cc715c78be8
Reviewed-on: https://go-review.googlesource.com/11086
Reviewed-by: Robert Griesemer <gri@golang.org>
Unfortunately there's no simple, easy way to make Dial{TCP,UDP} fail
consistently across all platforms. Fow now we skip the test on Solaris.
Change-Id: Ib3c55f670ac6a174fe9ea682dac7aab96b1e9dfb
Reviewed-on: https://go-review.googlesource.com/11058
Reviewed-by: Ian Lance Taylor <iant@golang.org>
dialSerial connects to a list of addresses in sequence. If a
timeout is specified, then each address gets an equal fraction of the
remaining time, with a magic constant (2 seconds) to prevent
"dial a million addresses" from allotting zero time to each.
Normally, net.Dial passes the DNS stub resolver's output to dialSerial.
If an error occurs (like destination/port unreachable), it quickly skips
to the next address, but a blackhole in the network will cause the
connection to hang until the timeout elapses. This is how UNIXy clients
traditionally behave, and is usually sufficient for non-broken networks.
The DualStack flag enables dialParallel, which implements Happy Eyeballs
by racing two dialSerial goroutines, giving the preferred family a
head start (300ms by default). This allows clients to avoid long
timeouts when the network blackholes IPv4 xor IPv6.
Fixes#8453Fixes#8455Fixes#8847
Change-Id: Ie415809c9226a1f7342b0217dcdd8f224ae19058
Reviewed-on: https://go-review.googlesource.com/8768
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Change-Id: Id93b8ab42fa311ce32209734ec9a0813f8736e25
Reviewed-on: https://go-review.googlesource.com/9914
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
The main change is:
golang.org/cl/10800 add pos parameter to Eval; remove New, EvalNode
followed by several cleanups/follow-up fixes:
golang.org/cl/10992 remove global vars in test
golang.org/cl/10994 remove unused scope parameter from NewSignature
golang.org/cl/10995 provide full source file extent to file scope
golang.org/cl/10996 comment fix in resolver.go
golang.org/cl/11004 updated cmd/vet
golang.org/cl/11042 be robust in the presence of incorrect/missing position info
Fixes#9980.
Change-Id: Id4aff688f6a399f76bf92b84c7e793b8da8baa48
Reviewed-on: https://go-review.googlesource.com/11122
Reviewed-by: Alan Donovan <adonovan@google.com>
The problem was not the kernel version as I thought before, it was
that the test used the same number for both the UID and the GID.
Thanks to Chris Siebenmann for debugging this.
Fixes#11220.
Change-Id: Ib5077e182497155e84044683209590ee0f7c9dde
Reviewed-on: https://go-review.googlesource.com/11124
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This CL adds a very long comment explaining how isStale and
the new build IDs work. As part of writing the comment I realized:
// When the go command makes the wrong build decision and does not
// rebuild something it should, users fall back to adding the -a flag.
// Any common use of the -a flag should be considered prima facie evidence
// that isStale is returning an incorrect false result in some important case.
// Bugs reported in the behavior of -a itself should prompt the question
// ``Why is -a being used at all? What bug does that indicate?''
The two uses of -a that are most commonly mentioned in bugs filed
against the go command are:
go install -a ./...
go build -tags netgo -a myprog
Both of these commands now do the right thing without needing -a.
The -a exception we introduced in Go 1.4 was for the first form, and
it broke the second form. Again, neither needs -a anymore, so restore
the old, simpler, easier to explain, less surprising meaning used in Go 1.3:
if -a is given, rebuild EVERYTHING.
See the comment for more justification and history.
Summary of recent CLs (to link bugs to this one):
Fixes#3036. Now 'go install ./...' works.
Fixes#6534. Now 'go install ./...' works.
Fixes#8290. Now 'go install ./...' works.
Fixes#9369. Now 'go build -tags netgo myprog' works.
Fixes#10702. Now using one GOPATH with Go 1.5 and Go 1.6 works.
(Each time you switch, everything needed gets rebuilt.
Switching from Go 1.4 to Go 1.5 will rebuild properly.
Switching from Go 1.5 back to Go 1.4 still needs -a when
invoking the Go 1.4 go command.)
Change-Id: I19f9eb5286efaa50de7c8326602e94604ab572eb
Reviewed-on: https://go-review.googlesource.com/10761
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This causes packages and binaries built by Go 1.5 to look
out of date to Go 1.6 and vice versa, so that when you flip
between different Go versions but keep the same GOPATH,
the right rebuilding happens at each flip.
Go 1.4 binaries will also look out of date to Go 1.5,
but Go 1.5 binaries will not look out of date to Go 1.4
(since Go 1.4 doesn't have anything like this).
People flipping between Go 1.4 and Go 1.5 will still
need to use go install -a every time to flip to Go 1.4,
but not when they flip back to Go 1.5.
Fixes#6534.
Fixes#10702.
Change-Id: I0ae7f268f822d483059a938a4f22846ff9275b4c
Reviewed-on: https://go-review.googlesource.com/10760
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
A workaround for #10460.
Change-Id: I607a556561d509db6de047892f886fb565513895
Reviewed-on: https://go-review.googlesource.com/10819
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Fixes#11131
When running 'go install -buildmode=c-shared', under the circumstances
described in issue #11131, the install command would fail trying to
install cgo headers if they have already been installed (by a previous
call to 'go install -buildmode=c-shared').
Since it's safe to overwrite said headers (according to iant@), this CL
introduces a parameter to builder's 'copy' and 'move' functions that,
if set to 'true', would force the overwriting of already installed
files.
This parameter value is set to 'true' only when installing cgo headers,
for now.
Change-Id: I5bda17ee757066a8e5d2b39f2e8f3a389eb1e4a2
Reviewed-on: https://go-review.googlesource.com/10870
Run-TryBot: Srdjan Petrovic <spetrovic@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The number of CPUs is of value when benchmarking but mostly
noise when testing. The recent change to default to the number
of CPUs available has made the tests noisier and confusing.
Fixes#11200
Change-Id: Ifc87d9ccb4177d73e304fb7ffcef4367bd163c9e
Reviewed-on: https://go-review.googlesource.com/11121
Reviewed-by: Russ Cox <rsc@golang.org>
While we're here, update the documentation and delete variables with no effect.
Change-Id: I4df0d266dff880df61b488ed547c2870205862f0
Reviewed-on: https://go-review.googlesource.com/10790
Reviewed-by: Austin Clements <austin@google.com>
A send on an unbuffered channel to a blocked receiver is the only
case in the runtime where one goroutine writes directly to the stack
of another. The garbage collector assumes that if a goroutine is
blocked, its stack contains no new pointers since the last time it ran.
The send on an unbuffered channel violates this, so it needs an
explicit write barrier. It has an explicit write barrier, but not one that
can handle a write to another stack. Use one that can (based on type bitmap
instead of heap bitmap).
To make this work, raise the limit for type bitmaps so that they are
used for all types up to 64 kB in size (256 bytes of bitmap).
(The runtime already imposes a limit of 64 kB for a channel element size.)
I have been unable to reproduce this problem in a simple test program.
Could help #11035.
Change-Id: I06ad994032d8cff3438c9b3eaa8d853915128af5
Reviewed-on: https://go-review.googlesource.com/10815
Reviewed-by: Austin Clements <austin@google.com>
In generateTrace we check that event timestamp is within the interesting range.
Then later in traceContext.time we double check event time.
However, for some events (e.g. emitSlice) we convert time of ev.Link (slice end) rather than ev itself (slice begin).
Slice end can be outside of the interesting time range, and so traceContext.time crashes.
Remove the check in traceContext.time, check in generateTrace loop is sufficient.
Change-Id: If94e93b5653c5816c0a8dcdd920f15df97616835
Reviewed-on: https://go-review.googlesource.com/11100
Reviewed-by: Andrew Gerrand <adg@golang.org>
Update to tip to fix#11003 (not possible to select events in chromium).
Fixed#11003
Change-Id: Ibba5d39ca809cfd5cb79c9e6d152b00899d49e08
Reviewed-on: https://go-review.googlesource.com/11062
Reviewed-by: Andrew Gerrand <adg@golang.org>
Return io.ErrUnexpectedEOF instead of io.EOF when reading a truncated
data descriptor.
Fixes#11146.
Change-Id: Ia1905955165fd38af3c557d1fa1703ed8be893e2
Reviewed-on: https://go-review.googlesource.com/11070
Reviewed-by: Andrew Gerrand <adg@golang.org>
The previous code had a brain fart: it took one of the length prefixes
as an element count, not a length. This didn't actually affect anything
because the loop stops as soon as it finds a hostname element, and the
hostname element is always the first and only element. (No other element
types have ever been defined.)
This change fixes the parsing in case SNI is ever changed in the future.
Fixes#10793.
Change-Id: Iafdf3381942bc22b1f33595315c53dc6cc2e9f0f
Reviewed-on: https://go-review.googlesource.com/11059
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The test fails on Ubuntu Trusty for some reason, probably because of
some set of kernel patches.
Change-Id: I52f7ca50b96fea5725817c9e9198860d419f9313
Reviewed-on: https://go-review.googlesource.com/11055
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
This was found while fuzzing another program, triggering a panic in
x509.ParseECPrivateKey.
Fixes#11154
Change-Id: Ief35ead38adf14caec4d37b9eacf8a92e67cd1e6
Reviewed-on: https://go-review.googlesource.com/10712
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
When scanning with a width, as in %5s, C skips leading spaces
brefore counting the 5 characters. We should do the same.
Reword the documentation about widths to make this clear.
Fixes#9444
Change-Id: I443a6441adcf1c834057ef3977f9116a987a79cd
Reviewed-on: https://go-review.googlesource.com/10997
Reviewed-by: Andrew Gerrand <adg@golang.org>
Running -copylocks over a large corpus generates 1507 warnings.
Of those, only 3 are from the new anonymous function check,
but they are all bugs.
Fixes#10927.
Change-Id: I2672f6871036bed711beec5f88bc39aa8b3b6a94
Reviewed-on: https://go-review.googlesource.com/11051
Reviewed-by: Rob Pike <r@golang.org>
This is needed for code that relies on having the correct file set
when parsing an expression only. There's currently no other way to
get to the file set otherwise or to invoke the parser correctly to
work on an expression only with a given file set.
Change-Id: I325f174cb34b69284e627f59fe8334efa4eaa45c
Reviewed-on: https://go-review.googlesource.com/10998
Reviewed-by: Alan Donovan <adonovan@google.com>
Linux 3.19 made a change in the handling of setgroups and the 'gid_map' file to
address a security issue.
The upshot of the 3.19 changes is that in order to update the 'gid_maps' file,
use of the setgroups() system call in this user namespace must first be disabled
by writing "deny" to one of the /proc/PID/setgroups files for this namespace.
Also added tests for remapping uid_map and gid_map inside new user
namespace.
Fixes#10626
Change-Id: I4d2539acbab741a37092d277e10f31fc39a8feb7
Reviewed-on: https://go-review.googlesource.com/10670
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Sanity check the pax-header size field before using it.
Fixes#11167.
Change-Id: I9d5d0210c3990e6fb9434c3fe333be0d507d5962
Reviewed-on: https://go-review.googlesource.com/10954
Reviewed-by: David Symonds <dsymonds@golang.org>
The documentation says that newlines behave like this:
Scan etc.: newlines are spaces.
Scanln etc.: newlines terminate the scan.
Scanf etc.: newlines must match in input and format.
The code did not implement this behavior in all cases,
especially for Scanf. Make it behave:
- Fix the handling of spaces and newlines in ss.Advance.
The code is longer but now behaves as it should.
- Delete the reuse of the current ss in newScanState.
There is really no need, since it's only used in recursive
calls to Scan etc., and the flags are likely wrong. Simpler
just to allocate a new one every time, and likelier to
be correct.
Fixes#10862.
Change-Id: If060ac021017346723b0d62de4e5a305da898f68
Reviewed-on: https://go-review.googlesource.com/10991
Reviewed-by: Andrew Gerrand <adg@golang.org>
The command "go tool pprof help" does not work:
$ go tool pprof help
open help: no such file or directory
The right command is "go tool pprof -h".
Change-Id: Icef5d4ab76774905854e46665ac1166d26d35f46
Reviewed-on: https://go-review.googlesource.com/10970
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I would like to re-apply reverted http://golang.org/cl/8523.
Reverted tests still fail in some environments (see issue #10360).
It is easier to run tests selectively when in Go.
This CL prepares for the changes.
Updates #10360
Change-Id: Iefeb1d71cb3d1cfa653a6ccd9f6e35686c0c5b24
Reviewed-on: https://go-review.googlesource.com/10608
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes CL 10682 work on windows.
Fixes#9645 (again)
Change-Id: Ie9b9af8b041c483a236b46adad4a50aa6e598c92
Reviewed-on: https://go-review.googlesource.com/10930
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As these tests were originally in bash, they are not designed to be
particularly hermetic. This CL adds various protective mechanisms to
try to catch cases where the tests can not run in parallel.
Change-Id: I983bf7b6ffba04eda58b4939eb89b0bdfcda8eff
Reviewed-on: https://go-review.googlesource.com/10911
Reviewed-by: Andrew Gerrand <adg@golang.org>
Examine the mtime of an existing file to guess a length of time to
sleep to ensure a different mtime.
Change-Id: I9e8b5c9486f5c3c8bd63125e3ed4763ce1ba767d
Reviewed-on: https://go-review.googlesource.com/10932
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This avoids a race with gcmarkwb_m that was leading to faults.
Fixes#10212.
Change-Id: I6fcf8d09f2692227063ce29152cb57366ea22487
Reviewed-on: https://go-review.googlesource.com/10816
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Forgot this one in my previous commit.
Change-Id: Ief089e99bdad24b3bcfb075497dc259d06cc727c
Reviewed-on: https://go-review.googlesource.com/10913
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Might get the Android build passing, or at least going further.
Change-Id: I08f97156a687abe5a3d95203922f4ffd84fbb212
Reviewed-on: https://go-review.googlesource.com/10924
Reviewed-by: David Crawshaw <crawshaw@golang.org>
These were found by grepping the comments from the go code and feeding
the output to aspell.
Change-Id: Id734d6c8d1938ec3c36bd94a4dbbad577e3ad395
Reviewed-on: https://go-review.googlesource.com/10941
Reviewed-by: Aamir Khan <syst3m.w0rm@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This issue was fixed in CL 10900.
Change-Id: I88f107cb73c8a515f39e02506ddd2ad1e286b1fb
Reviewed-on: https://go-review.googlesource.com/10940
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When the Stat or Fstat system calls return -1,
dirstat incorrectly returns ErrShortStat.
However, the error returned by Stat or Fstat
could be different. For example, when the
file doesn't exist, they return "does not exist".
Dirstat should return the error returned by
the system call.
Fixes#10911.
Fixes#11132.
Change-Id: Icf242d203d256f12366b1e277f99b1458385104a
Reviewed-on: https://go-review.googlesource.com/10900
Run-TryBot: David du Colombier <0intro@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Process.handle was accessed without synchronization while wait() and
signal() could be called concurrently.
A first solution was to add a Mutex in Process but it was probably too
invasive given Process.handle is only used on Windows.
This version uses atomic operations to read the handle value. There is
still a race between isDone() and the value of the handle, but it only
leads to slightly incorrect error codes. The caller may get a:
errors.New("os: process already finished")
instead of:
syscall.EINVAL
which sounds harmless.
Fixes#9382
Change-Id: Iefcc687a1166d5961c8f27154647b9b15a0f748a
Reviewed-on: https://go-review.googlesource.com/9904
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was a refactoring bug during
'go tool compile', CL 10289.
Change-Id: Ibfd333be39ec72bba331fdf352df619cc21851a9
Reviewed-on: https://go-review.googlesource.com/10849
Reviewed-by: Minux Ma <minux@golang.org>
GCM is traditionally used with a 96-bit nonce, but the standard allows
for nonces of any size. Non-standard nonce sizes are required in some
protocols, so add support for them in crypto/cipher's GCM
implementation.
Change-Id: I7feca7e903eeba557dcce370412b6ffabf1207ab
Reviewed-on: https://go-review.googlesource.com/8946
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Bool codegen was generating a temp for function calls
and other complex expressions, but was not using it.
This was a refactoring bug introduced by CL 7853.
The cmp code used to do (in short):
l, r := &n1, &n2
It was changed to:
l, r := nl, nr
But the requisite assignments:
nl, nr = &n1, &n2
were only introduced on one of two code paths.
Fixes#10654.
Change-Id: Ie8de0b3a333842a048d4308e02911bb10c6915ce
Reviewed-on: https://go-review.googlesource.com/10844
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously we enforced both that the extended key usages of a client
certificate chain allowed for client authentication, and that the
client-auth EKU was in the leaf certificate.
This change removes the latter requirement. It's still the case that the
chain must be compatible with the client-auth EKU (i.e. that a parent
certificate isn't limited to another usage, like S/MIME), but we'll now
accept a leaf certificate with no EKUs for client-auth.
While it would be nice if all client certificates were explicit in their
intended purpose, I no longer feel that this battle is worthwhile.
Fixes#11087.
Change-Id: I777e695101cbeba069b730163533e2977f4dc1fc
Reviewed-on: https://go-review.googlesource.com/10806
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
After a little build coordinator change, this will get us sharding of
the race builder.
Update #11074
Change-Id: I4c55267563b6f5e213def7dd6707c837ae2106bf
Reviewed-on: https://go-review.googlesource.com/10845
Reviewed-by: Andrew Gerrand <adg@golang.org>
Change-Id: If11621985c0a5a1f2133cdc974f37fd944b93e5e
Reviewed-on: https://go-review.googlesource.com/10808
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The documentation for quick.Value says that it "returns an arbitrary
value of the given type." In spite of this, nil values for pointers were
never generated, which seems more like an oversight than an intentional
choice.
The lack of nil values meant that testing recursive type like
type Node struct {
Next *Node
}
with testing/quick would lead to a stack overflow since the data
structure would never terminate.
This change may break tests that don't check for nil with pointers
returned from quick.Value. Two such instances were found in the standard
library, one of which was in the testing/quick package itself.
Fixes#8818.
Change-Id: Id390dcce649d12fbbaa801ce6f58f5defed77e60
Reviewed-on: https://go-review.googlesource.com/10821
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
- remove TODO on non-existing fmt.Formatter type
(type exists now)
- guard uses of imported types against nil
Change-Id: I9ae8e5a448e73c84dec1606ea9d9ed5ddeee8dc6
Reviewed-on: https://go-review.googlesource.com/10777
Reviewed-by: Alan Donovan <adonovan@google.com>
Add .exe to exectable name, so it can be executed on windows.
Use proper windows paths when searching vet output.
Replace Skip with Skipf.
Fixes build
Change-Id: Ife40d8f5ab9d7093ca61c50683a358d4d6a3ba34
Reviewed-on: https://go-review.googlesource.com/10742
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Patrick Mézard <patrick@mezard.eu>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Commit 1303957 was supposed to enable write barriers during the
concurrent scan phase, but it only enabled *calls* to the write
barrier during this phase. It failed to update the redundant list of
write-barrier-enabled phases in gcmarkwb_m, so it still wasn't greying
objects during the scan phase.
This commit fixes this by replacing the redundant list of phases in
gcmarkwb_m with simply checking writeBarrierEnabled. This is almost
certainly redundant with checks already done in callers, but the last
time we tried to remove these redundant checks everything got much
slower, so I'm leaving it alone for now.
Fixes#11105.
Change-Id: I00230a3cb80a008e749553a8ae901b409097e4be
Reviewed-on: https://go-review.googlesource.com/10801
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Minux Ma <minux@golang.org>
Stack barriers assume that writes through pointers to frames above the
current frame will get write barriers, and hence these frames do not
need to be re-scanned to pick up these changes. For normal writes,
this is true. However, there are places in the runtime that use
typedmemmove to potentially write through pointers to higher frames
(such as mapassign1). Currently, typedmemmove does not execute write
barriers if the destination is on the stack. If there's a stack
barrier between the current frame and the frame being modified with
typedmemmove, and the stack barrier is not otherwise hit, it's
possible that the garbage collector will never see the updated pointer
and incorrectly reclaim the object.
Fix this by making heapBitsBulkBarrier (which lies behind typedmemmove
and its variants) detect when the destination is in the stack and
unwind stack barriers up to the point, forcing mark termination to
later rescan the effected frame and collect these pointers.
Fixes#11084. Might be related to #10240, #10541, #10941, #11023,
#11027 and possibly others.
Change-Id: I323d6cd0f1d29fa01f8fc946f4b90e04ef210efd
Reviewed-on: https://go-review.googlesource.com/10791
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, write barriers are only enabled after completion of the
concurrent scan phase, as we enter the concurrent mark phase. However,
stack barriers are installed during the scan phase and assume that
write barriers will track changes to frames above the stack
barriers. Since write barriers aren't enabled until after stack
barriers are installed, we may miss modifications to the stack that
happen after installing the stack barriers and before enabling write
barriers.
Fix this by enabling write barriers during the scan phase.
This commit intentionally makes the minimal change to do this (there's
only one line of code change; the rest are comment changes). At the
very least, we should consider eliminating the ragged barrier that's
intended to synchronize the enabling of write barriers, but now just
wastes time. I've included a large comment about extensions and
alternative designs.
Change-Id: Ib20fede794e4fcb91ddf36f99bd97344d7f96421
Reviewed-on: https://go-review.googlesource.com/10795
Reviewed-by: Russ Cox <rsc@golang.org>
Currently checkmarks mode fails to rescan stacks because it sees the
leftover state bits indicating that the stacks haven't changed since
the last scan. As a result, it won't detect lost marks caused by
failing to scan stacks correctly during regular garbage collection.
Fix this by marking all stacks dirty before performing the checkmark
phase.
Change-Id: I1f06882bb8b20257120a4b8e7f95bb3ffc263895
Reviewed-on: https://go-review.googlesource.com/10794
Reviewed-by: Russ Cox <rsc@golang.org>
obj.ARET is the portable return mnemonic. ppc64.ARETURN is a legacy
alias.
This was done with
sed -i s/ppc64\.ARETURN/obj.ARET/ cmd/compile/**/*.go
sed -i s/ARETURN/obj.ARET/ cmd/internal/obj/ppc64/obj9.go
Change-Id: I4d8e83ff411cee764774a40ef4c7c34dcbca4e43
Reviewed-on: https://go-review.googlesource.com/10673
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
All of the architectures except ppc64 have only "RET" for the return
mnemonic. ppc64 used to have only "RETURN", but commit cf06ea6
introduced RET as a synonym for RETURN to make ppc64 consistent with
the other architectures. However, that commit was never followed up to
make the code itself consistent by eliminating uses of RETURN.
This commit replaces all uses of RETURN in the ppc64 assembly with
RET.
This was done with
sed -i 's/\<RETURN\>/RET/' **/*_ppc64x.s
plus one manual change to syscall/asm.s.
Change-Id: I3f6c8d2be157df8841d48de988ee43f3e3087995
Reviewed-on: https://go-review.googlesource.com/10672
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
gc should ideally consider this an error too; see golang/go#8560.
Change-Id: Ieee71c4ecaff493d7f83e15ba8c8a04ee90a4cf1
Reviewed-on: https://go-review.googlesource.com/10757
Reviewed-by: Robert Griesemer <gri@golang.org>
In x/tools, MethodSetCache was moved from x/tools/go/types to
x/tools/go/types/typeutil. Mirror that change.
Change-Id: Ib838a9518371473c83fa4abc2778d42f33947c98
Reviewed-on: https://go-review.googlesource.com/10771
Reviewed-by: Alan Donovan <adonovan@google.com>
Currently the stack barriers are installed at the next frame boundary
after gp.sched.sp + 1024*2^n for n=0,1,2,... However, when a G is in a
system call, we set gp.sched.sp to 0, which causes stack barriers to
be installed at *every* frame. This easily overflows the slice we've
reserved for storing the stack barrier information, and causes a
"slice bounds out of range" panic in gcInstallStackBarrier.
Fix this by using gp.syscallsp instead of gp.sched.sp if it's
non-zero. This is the same logic that gentraceback uses to determine
the current SP.
Fixes#11049.
Change-Id: Ie40eeee5bec59b7c1aa715a7c17aa63b1f1cf4e8
Reviewed-on: https://go-review.googlesource.com/10755
Reviewed-by: Russ Cox <rsc@golang.org>
ContinueOnError is particularly confusing, because it causes
FlagSet.Parse to return as soon as it sees an error. I gather that the
intent is "continue the program" rather than "continue parsing",
compared to exiting or panicking.
Change-Id: I27370ce1f321ea4debcee5b03faff3532495c71a
Reviewed-on: https://go-review.googlesource.com/10740
Reviewed-by: Rob Pike <r@golang.org>
Actually add all build flags, so we also get things like -race.
Fixes#10228.
Change-Id: I5f77dda9d1ee3208e1833702f12f68c2731c4b22
Reviewed-on: https://go-review.googlesource.com/10697
Reviewed-by: Russ Cox <rsc@golang.org>
Also fix the interaction between -buildmode and -shared.
It's okay for -shared to change the default build mode,
but it's not okay for it to silently override an explicit -buildmode=exe.
Change-Id: Id40f93d140cddf75b19e262b3ba4856ee09a07ba
Reviewed-on: https://go-review.googlesource.com/10315
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
People invoking the linker directly already have to change their scripts
to use the new "go tool link", so this is a good time to make the -X flag
behave like all other Go flags and take just a single argument.
The old syntax will continue to be accepted (it is rewritten into the new
syntax before flag parsing). Maybe some day we will be able to retire it.
Even if we never retire the old syntax, having the new syntax at least
makes the rewriting much less of a kludge.
Change-Id: I91e8df94f4c22b2186e81d7f1016b8767d777eac
Reviewed-on: https://go-review.googlesource.com/10310
Reviewed-by: Rob Pike <r@golang.org>
These are the Go 1.4 docs but refreshed for Go 1.5.
The most sigificant change is that all references to the Plan 9 toolchain are gone.
The tools no longer bear any meaningful resemblance.
Change-Id: I44f5cadb832a982323d7fee0b77673e55d761b35
Reviewed-on: https://go-review.googlesource.com/10298
Reviewed-by: Rob Pike <r@golang.org>
See golang.org/s/go15gomaxprocs for details.
Change-Id: I8de5df34fa01d31d78f0194ec78a2474c281243c
Reviewed-on: https://go-review.googlesource.com/10668
Reviewed-by: Rob Pike <r@golang.org>
The flag is available from the go test command as -count:
% go test -run XXX -bench . -count 3
PASS
BenchmarkSprintfEmpty 30000000 54.0 ns/op
BenchmarkSprintfEmpty 30000000 51.9 ns/op
BenchmarkSprintfEmpty 30000000 53.8 ns/op
BenchmarkSprintfString 10000000 238 ns/op
BenchmarkSprintfString 10000000 239 ns/op
BenchmarkSprintfString 10000000 234 ns/op
BenchmarkSprintfInt 10000000 232 ns/op
BenchmarkSprintfInt 10000000 226 ns/op
BenchmarkSprintfInt 10000000 225 ns/op
...
If -cpu is set, each test is run n times for each cpu value.
Original by r (CL 10663).
Change-Id: If3dfbdf21698952daac9249b5dbca66f5301e91b
Reviewed-on: https://go-review.googlesource.com/10669
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Non-ELF binary formats are much less flexible and typically do not
have a good place to store the build ID.
We store it as raw bytes at the beginning of the text segment.
The only system I know of that will be upset about this is NaCl,
and NaCl is an ELF system and does not use this.
For #11048.
Change-Id: Iaa7ace703c4cf36392e752eea9b55e2ce49e9826
Reviewed-on: https://go-review.googlesource.com/10708
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Other binary formats to follow.
For #11048.
Change-Id: Ia2d8b47c99c99d171c014b7cfd23c1c7ada5231c
Reviewed-on: https://go-review.googlesource.com/10707
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Other binary formats to follow.
Using our own note instead of the GNU build ID note because
we are not the GNU project, and I can't guarantee that the semantics
of our note and the semantics of the GNU note will match forever.
(Also they don't match today.)
For #11048.
Change-Id: Iec7e5a2e49d52b6d3a51b0aface2de7c77a45491
Reviewed-on: https://go-review.googlesource.com/10706
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The bootstrap restriction is to avoid needing cgo for package net.
There's no problem with building debug/elf and debug/dwarf,
so do that.
An upcoming CL is going to add more note processing code,
and it simplifies things not to have to think about the code being
missing half the time.
Change-Id: I0e2f120ac23f14db6ecfcec7bfe254a69abcf7b6
Reviewed-on: https://go-review.googlesource.com/10703
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The go/doc package doesn't remove unexported entries from const
and var blocks, so we must trim them ourselves.
Fixes#11008
Change-Id: Ibd60d87e09333964e2588340a2ca2b8804bbaa28
Reviewed-on: https://go-review.googlesource.com/10643
Reviewed-by: Russ Cox <rsc@golang.org>
- s|"golang.org/x/tools/go/exact"|"go/constant"|
- s|"golang.org/x/tools/go/types"|"go/types"|
- removed import of gcimporter
- import "go/importer" instead
- trivial adjustments to make use of go/importer
- adjusted import paths for whitelist.go
Change-Id: I43488ff44c329cd869c92dcc31193fb31bebfd29
Reviewed-on: https://go-review.googlesource.com/10695
Reviewed-by: Rob Pike <r@golang.org>
cp -r x/tools/cmd/vet cmd/vet without any changes.
The next change will adjust the source to use std
repo go/types and friends.
This may (temporarily) break the build; the next
commit (immediately following) will fix it. We do
it in two commits so that we can see the manual
changes.
Change-Id: Ic45dab7066f13923e21f8c61200c8c3fd447b171
Reviewed-on: https://go-review.googlesource.com/10694
Reviewed-by: Rob Pike <r@golang.org>
As of golang.org/cl/9154, running go test will override a previous
go install -a -tags=lldb std with the tag-less version of stdlib. So
we pass -tags=lldb into the relevant go test commands.
Change-Id: I1c718289d7212373a9383eff53a643f06598f5ed
Reviewed-on: https://go-review.googlesource.com/10701
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Also modifies 'dist test' to use that sharding, and removes some old
temporary stuff from dist test which are no longer required.
'dist test' now also supports running a list of tests given in
arguments, mutually exclusive with the existing -run=REGEXP flag. The
hacky fast paths for avoiding the 1 second "go list" latency are now
removed and only apply to the case where partial tests are run via
args, instead of regex. The build coordinator will use both styles
for awhile. (the statically-sharded ARM builders on scaleway will
continue to use regexps, but the dynamically-shared builders on GCE
will use the list of tests)
Updates #10029
Change-Id: I557800a54dfa6f3b5100ef4c26fe397ba5189813
Reviewed-on: https://go-review.googlesource.com/10688
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL resets the parent stack when printing a character or comment field struct.
In the case of XML elements, the previous parents stack must be considered. However,
charadata or comment fields can't be printed in other fields so it seems required to reset
the parent stack each time a chardata or comment field is printed.
Fixes#5072
Change-Id: I84f61c9bfce94133cd0c076c11211b9be5b4b1ac
Reviewed-on: https://go-review.googlesource.com/9910
Reviewed-by: Nigel Tao <nigeltao@golang.org>
Reviewed-by: roger peppe <rogpeppe@gmail.com>
If 'go install' (with no arguments, meaning the current directory)
succeeds, remove the executable written by 'go build', if present.
This avoids leaving a stale binary behind during a sequence like:
go build
<test, mostly works, make small change>
go install
Before this CL, the current directory still has the stale binary
from 'go build'. If $PATH contains dot, running the name of
the program will find this stale binary instead of the new,
installed one.
Remove the 'go build' target during 'go install', both to clean
up the directory and to avoid accidentally running the stale binary.
Another way to view this CL is that it makes the go command
behave as if 'go install' is implemented by 'go build' followed by
moving the resulting binary to the install location.
See #9645 for discussion and objections.
Fixes#9645.
Change-Id: Ide109572f96bbb5a35be45dda17738317462a7d4
Reviewed-on: https://go-review.googlesource.com/10682
Reviewed-by: Rob Pike <r@golang.org>
We used to put a rebuilding barrier between GOPATHs, so that if
you had GOPATH=dir1:dir2 and you had "p" in dir1/src/p
and "q" in dir2/src/q, with "p" importing "q", then when you
ran 'go install p', it would see that it was working in dir1
and (since nothing from dir2 was explicitly mentioned)
would assume that everything in dir2 is up-to-date, provided
it is built at all.
This has the confusing behavior that if "q" hasn't been built ever,
then if you update sources in q and run 'go install p', the right
thing happens (q is rebuilt and then p), but after that, if you update
sources in q and run 'go install p', nothing happens: the installed
q is assumed up-to-date.
People using code conventions with multiple GOPATH entries
(for example, with commands in one place and libraries in another,
or vendoring conventions that try to avoid rewriting import paths)
run into this without realizing it and end up with incorrect build
results.
The original motivation here was to avoid rebuild standard packages
since a system-installed GOROOT might be unwritable.
The change introduced to separate GOROOT also separated
individual GOPATH entries. Later changes added a different, more
aggressive earlier shortcut for GOROOT in release settings,
so the code here is now only applying to (and confusing)
multiple GOPATH entries. Remove it.
Fixes#10509.
Change-Id: I687a3baa81eff4073b0d67f9acbc5a3ab192eda5
Reviewed-on: https://go-review.googlesource.com/9155
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The go command uses file modification times to decide when a
package is out of date: if the .a file is older than a source file,
the .a file needs to be rebuilt. This scheme breaks down when
multiple source files compile into a single .a file: if one source file
is removed but no other changes are made, there is no indication
that the .a file is out of date.
The fix is to store a value called a build ID in the package archive itself.
The build ID is a hash of the names of all source files compiled into the package.
A later go command can read the build ID out of the package archive
and compare to the build ID derived from the list of source files it now
sees in the directory. If the build IDs differ, the file list has changed,
and the package must be rebuilt.
There is a cost here: when scanning a package directory, in addition
to reading the beginning of every source file for build tags and imports,
the go command now also reads the beginning of the associated
package archive, for the build ID. This is at most a doubling in the
number of files read. On my 2012 MacBook Pro, the time for
'go list std' increases from about 0.215 seconds to about 0.23 seconds.
For executable binaries, the approach is the same except that the
build ID information is stored in a trailer at the end of the executable file.
It remains to be seen if anything objects to the trailer.
I don't expect problems except maybe on Plan 9.
Fixes#3895.
Change-Id: I21b4ebf5890c1a39e4a013eabe1ddbb5f3510c04
Reviewed-on: https://go-review.googlesource.com/9154
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Suggested during code reviews of last 15 CLs (or so).
Change-Id: If780f6eb47a7a31df133c64d5dcf0eaf04d8447b
Reviewed-on: https://go-review.googlesource.com/10675
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
stkcheck is flow-insensitive: It processes calls in PC order.
Since morestack was always the first call in a function,
it was a safe, conservative approximation to simply adjust stack
space as we went, recognizing morestack when it showed up.
Subsequent CLS will rearrange the function prologue;
morestack may no longer be the first call in a function.
Introducing flow-sensitivity to stkcheck would allow this,
and possibly allow a smaller stackguard.
It is also a high risk change and possibly expensive.
Instead, assume that all calls to morestack occur as
part of the function prologue, no matter where they
are located in the program text.
Updates #10587.
Change-Id: I4dcdd4256a980fc4bc433a68a10989ff57f7034f
Reviewed-on: https://go-review.googlesource.com/10496
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Otherwise subsequent tests won't see any modified GOROOT.
With this CL I can move my GOROOT, set GOROOT to the new location, and
the runtime tests pass. Previously the crash_tests would instead look
for the GOROOT baked into the binary, instead of the env var:
--- FAIL: TestGcSys (0.01s)
crash_test.go:92: building source: exit status 2
go: cannot find GOROOT directory: /home/bradfitz/go
--- FAIL: TestGCFairness (0.01s)
crash_test.go:92: building source: exit status 2
go: cannot find GOROOT directory: /home/bradfitz/go
--- FAIL: TestGdbPython (0.07s)
runtime-gdb_test.go:64: building source exit status 2
go: cannot find GOROOT directory: /home/bradfitz/go
--- FAIL: TestLargeStringConcat (0.01s)
crash_test.go:92: building source: exit status 2
go: cannot find GOROOT directory: /home/bradfitz/go
Update #10029
Change-Id: If91be0f04d3acdcf39a9e773a4e7905a446bc477
Reviewed-on: https://go-review.googlesource.com/10685
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The only unreviewed change is in mparith3.go.
Change-Id: Iec0885e7688981cbaed04c152dc9b1c7032677e6
Reviewed-on: https://go-review.googlesource.com/10665
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
The build ID is an opaque token supplied by the build system.
The compiler writes it out early in the Go export metadata
(the second line), in a way that does not bother existing readers.
The intent is that the go command can use this to store information
about the sources for the generated code, so that it can detect
stale packages even in cases (like removed files) where mtimes fail.
Change-Id: Ib5082515d6cde8a07a8d4b5c69d1e8e4190cb5e1
Reviewed-on: https://go-review.googlesource.com/9153
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This one didn't get written out.
Change-Id: Iee173861fb4dc7cafa64ba5f601f4664b6e8da4e
Reviewed-on: https://go-review.googlesource.com/10681
Reviewed-by: Russ Cox <rsc@golang.org>
In particular, this avoids moving the mtime on runtime/zversion.go
forward unless the file is out of date. In turn, this makes cross compiles
that run dist multiple times coexist nicely.
(It's no longer necessary to run dist multiple times to set up cross compiles,
but people still might, and it's easy to fix regardless.)
Fixes#4749.
Change-Id: Id430525f168f106bc4b821ca74b2ca498a748f14
Reviewed-on: https://go-review.googlesource.com/9152
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was mishandling conjunctions containing negations.
Change-Id: Ife571b28416870ba2ceadbdac5ecb4670432bba1
Reviewed-on: https://go-review.googlesource.com/9151
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is follow-up to CL10607
- Refactor AddParseTree() to use t.associate()
- Refactor Parse() to use AddParseTree() to put entries into common structure
- Clone() should not put entry in t.tmpl for undefined template
- Clarify documentation for Templates()
- Clarify documentation for AddParseTree() to include the error case
Updates #10910
Uodates #10926
Includes test cases for most of the above changes
Change-Id: I25b2fce6f9651272866f881acf44e4dbca04a4a8
Reviewed-on: https://go-review.googlesource.com/10622
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
