Don't use the line number of the argument itself, as that may be from
arbitrarily earlier in the function.
Fixes#60673
Change-Id: Ifc0a2aaae221a256be3a4b0b2e04849bae4b79d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/502656
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
CL 496257 adds min/max builtins, which may appear as argument to a
function call, so it will be tested by mayCall. But those ops are not
handled by mayCall, causes the compiler crashes.
Fixes#60582
Change-Id: I729f10bf62b4aad39ffcb1433f576e74d09fdd9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/500575
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
HAUTO should be handled the same way as other stack offsets for
adding to constant pool. Add the missing cases.
Fixes#57955.
Change-Id: If7fc82cafb2bbf0a6121e73e353b8825cb36b5bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/463138
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Some testdir tests fail if GOEXPERIMENT=cgocheck2 is set. Fix this by
skipping these tests.
Change-Id: I58d4ef0cceb86bcf93220b4a44de9b9dc4879b16
Reviewed-on: https://go-review.googlesource.com/c/go/+/499675
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Two interface types that are assignable don't have to be identical;
specifically, if they are defined types, they can be different
defined types. If those defined types specify type parameters which
are never used, do not infer a type argument based on the instantiation
of a matching defined type.
Adjusted three existing tests where we inferred type arguments incorrectly.
Fixes#60377.
Change-Id: I91fb207235424b3cbc42b5fd93eee619e7541cb7
Reviewed-on: https://go-review.googlesource.com/c/go/+/498315
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
sparse conditional constant propagation can discover optimization opportunities that cannot be found by just combining constant folding and constant propagation and dead code elimination separately.
Updates #59399
Change-Id: Ia954e906480654a6f0cc065d75b5912f96f36b2e
GitHub-Last-Rev: 90fc02db99
GitHub-Pull-Request: golang/go#59575
Reviewed-on: https://go-review.googlesource.com/c/go/+/483875
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
CL 415241 and CL 411935 break tests into unified/nounified variants, for
compatibility with old frontend while developing unified IR. Now the old
frontend was gone, so moving those tests back to the original files.
Change-Id: Iecdcd4e6ee33c723f6ac02189b0be26248e15f0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/497275
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
In Go 1.17, cmd/compile gained the ability to inline calls to
functions that contain function literals (aka "closures"). This was
implemented by duplicating the function literal body and emitting a
second LSym, because in general it might be optimized better than the
original function literal.
However, the second LSym was named simply as any other function
literal appearing literally in the enclosing function would be named.
E.g., if f has a closure "f.funcX", and f is inlined into g, we would
create "g.funcY" (N.B., X and Y need not be the same.). Users then
have no idea this function originally came from f.
With this CL, the inlined call stack is incorporated into the clone
LSym's name: instead of "g.funcY", it's named "g.f.funcY".
In the future, it seems desirable to arrange for the clone's name to
appear exactly as the original name, so stack traces remain the same
as when -l or -d=inlfuncswithclosures are used. But it's unclear
whether the linker supports that today, or whether any downstream
tooling would be confused by this.
Updates #60324.
Change-Id: Ifad0ccef7e959e72005beeecdfffd872f63982f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/497137
Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Retrying the original CL with a small modification. The original CL
did not handle the case of reading an itab out of a dictionary
correctly. When we read an itab out of a dictionary, we must treat
the type inside that itab as maybe being put in an interface.
Original CL: 486895
Revert CL: 490156
Change-Id: Id2dc1699d184cd8c63dac83986a70b60b4e6cbd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/491495
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This enables the implementation for proposal #58671, which is
a likely accept. By enabling it early we get a bit extra soak
time for this feature. The change can be reverted trivially, if
need be.
For #58671.
Change-Id: Id6c27515e45ff79f4f1d2fc1706f3f672ccdd1ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/495955
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the types1 universe, we only need to represent value types. For
interfaces, this means we only need to worry about pure interfaces. A
pure interface can embed a union type, but the overall union must be
equivalent to "any".
In go.dev/cl/458619, we changed the types1 reader to return "any", but
to incorporate a consistency check to make sure this is valid.
Unfortunately, a pure interface can actually still reference impure
interfaces, and in general this is hard to check precisely without
reimplementing a lot of types2 data structures and logic into types1.
We haven't had any other reports of this check failing since 1.20, so
it seems simplest to just suppress for now.
Fixes#60117.
Change-Id: I5053faafe2d1068c6d438b2193347546bf5330cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/495455
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Be more liberal about expanding the OR tree. Handle any tree shape
instead of a fully left or right associative tree.
Also remove tail feature, it isn't ever needed.
Change-Id: If16bebef94b952a604d6069e9be3d9129994cb6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/494056
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ryan Berger <ryanbberger@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
[This is a roll-forward of CL 458755, which was reverted due to make.bash
being broken on GOAMD64=v3. But it turned out that the problem was caused
by wrong bswap/load rewrite rules, and it was fixed in CL 492616.]
This CL enhances the tighten pass. Previously if a value has memory arg,
then the tighten pass won't move it, actually if the memory state is
consistent among definition and use block, we can move the value. This
CL optimizes this case. This is useful for the following situation:
b1:
x = load(...mem)
if(...) goto b2 else b3
b2:
use(x)
b3:
some_op_not_use_x
For the micro-benchmark mentioned in #56620, the performance improvement
is about 15%.
There's no noticeable performance change in the go1 benchmark.
Fixes#56620
Change-Id: I36ea68bed384986cd3ae81cb9e6efe84bb213adc
Reviewed-on: https://go-review.googlesource.com/c/go/+/492895
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Eric Fang <eric.fang@arm.com>
This modifies some existing rules to allow more prefixed instructions
to be generated when using GOPPC64=power10. Some rules also check
if PCRel is available, which is currently supported for linux/ppc64le
and linux/ppc64 (internal linking only).
Prior to p10, DS-offset loads and stores had a 16 bit size limit for
the offset field. If the offset of the data for load or store was
beyond this range then an indexed load or store would be selected by
the rules.
In p10 the assembler can generate prefixed instructions in this case,
but does not if an indexed instruction was selected during the lowering
pass.
This allows many more cases to use prefixed loads or stores, reducing
function sizes and improving performance in some cases where the code
change happens in key loops.
For example in strconv BenchmarkAppendQuoteRune before:
12c5e4: 15 00 10 06 pla r10,1425660
12c5e8: fc c0 40 39
12c5ec: 00 00 6a e8 ld r3,0(r10)
12c5f0: 10 00 aa e8 ld r5,16(r10)
After this change:
12a828: 15 00 10 04 pld r3,1433272
12a82c: b8 de 60 e4
12a830: 15 00 10 04 pld r5,1433280
12a834: c0 de a0 e4
Performs better in the second case.
A testcase was added to verify that the rules correctly select a load or
store based on the offset and whether power10 or earlier.
Change-Id: I4335fed0bd9b8aba8a4f84d69b89f819cc464846
Reviewed-on: https://go-review.googlesource.com/c/go/+/477398
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Paul Murphy <murp@ibm.com>
With CL 408826 reflect.Value does not always escape. We need to
make sure Value operations does (or does not) escape the Value
correctly. This CL adds a test.
There are still a few unfortunate cases, where some Value
operations escape more than necessary (comparing to a non-reflect
version of the code), but hard to fix. These are mostly that a
Value would escape conditionally (mostly on the type of the Value),
but currently we don't have a good way to express that.
Change-Id: I9fdfc7584670aa09c5a01f6b2803f2043aaddb65
Reviewed-on: https://go-review.googlesource.com/c/go/+/441938
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Types are either static (for compiler-created types) or heap
allocated and always reachable (for reflection-created types, held
in the central map). So there is no need to escape types.
With CL 408826 reflect.Value does not always escape. Some functions
that escapes Value.typ would make the Value escape without this CL.
Had to add a special case for the inliner to keep (*Value).Type
still inlineable.
Change-Id: I7c14d35fd26328347b509a06eb5bd1534d40775f
Reviewed-on: https://go-review.googlesource.com/c/go/+/413474
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The effect and motivation is for the test to be selected when doing
'go test cmd' and not when doing 'go test std' since it's primarily
about testing the Go compiler and linker. Other than that, it's run
by all.bash and 'go test std cmd' as before.
For #56844.
Fixes#60059.
Change-Id: I2d499af013f9d9b8761fdf4573f8d27d80c1fccf
Reviewed-on: https://go-review.googlesource.com/c/go/+/493876
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Russ added test/bench/go1 in CL 5484071 to have a stable suite of
programs to use as benchmarks. For the compiler and runtime we had
back then, those were reasonable benchmarks, but the compiler and
runtime are now far more sophisticated and these benchmarks no longer
have good coverage. We also now have better benchmark suites
maintained outside the repo (e.g., golang.org/x/benchmarks). Keeping
test/bench/go1 at this point is actively misleading.
Indirectly related to #37486, as this also removes the last package
dist test runs outside of src/.
Change-Id: I2867ef303fe48a02acce58ace4ee682add8acdbf
Reviewed-on: https://go-review.googlesource.com/c/go/+/494193
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The test directory driver currently sets the GOOS/GOARCH environment
variables if they aren't set. This appears to be in service of a
single test, test/env.go, which was introduced in September 2008 along
with os.Getenv. It's not entirely clear what that test is even trying
to check, since runtime.GOOS isn't necessarily the same as $GOOS. We
keep the test around because golang.org/x/tools/go/ssa/interp uses it
as a test case, but we simplify the test and eliminate the need for
the driver to set GOOS/GOARCH.
Change-Id: I5acc0093b557c95d1f0a526d031210256a68222d
Reviewed-on: https://go-review.googlesource.com/c/go/+/493601
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Adds rules that rewrites statements such as ~P&~Q as ~(P|Q) and ~P|~Q as ~(P&Q), removing an extraneous instruction.
Change-Id: Icedb97df741680ddf9799df79df78657173aa500
GitHub-Last-Rev: f22e2350c9
GitHub-Pull-Request: golang/go#60018
Reviewed-on: https://go-review.googlesource.com/c/go/+/493175
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Stefan M <st3f4nm4d4@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Thanks to the recent addition of the memcombine pass, the
ppc64 ports now have the memcombine optimizations. Previously
in PPC64.rules, the memcombine rules were only added for
ppc64le targets due to the significant increase in size of
the rewritePPC64.go file when those rules were added. The
ppc64 and ppc64le rules had to be different because of the
byte order due to endianness differences.
This enables the memcombine tests to be run on ppc64 as well
as ppc64le.
Change-Id: I4081e2d94617a1b66541d536c0c2662e266c9c1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/492615
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Lynn Boger <laboger@linux.vnet.ibm.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis, then later fixed
first with an attempt in CL 482355, then again in CL 484859, and then
one more time with CL 492135.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Change-Id: I5f75fcceb177f05853996b75184a486528eafe96
Reviewed-on: https://go-review.googlesource.com/c/go/+/492017
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
If the function referenced by a closure expression is incorporated
into a static init, be sure to mark it as non-hidden, since otherwise
it will be live but no longer reachable from the init func, hence it
will be skipped during escape analysis, which can lead to
miscompilations.
Fixes#59680.
Change-Id: Ib858aee296efcc0b7655d25c23ab8a6a8dbdc5f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/492135
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
[This is a roll-forward of CL 484859, this time including a fix for
issue #59709. The call to do dead function marking was taking place in
the wrong spot, causing it to run more than once if generics were
instantiated.]
This patch generalizes the code in the inliner that marks unreferenced
hidden closure functions as dead. Rather than doing the marking on the
fly (previous approach), this new approach does a single pass at the
end of inlining, which catches more dead functions.
Change-Id: I0e079ad755c21295477201acbd7e1a732a98fffd
Reviewed-on: https://go-review.googlesource.com/c/go/+/492016
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Previously, type arguments could only be inferred for generic
functions in call expressions, whereas with the reverse type inference
proposal they can now be inferred in assignment contexts too. As a
consequence, we now need to check Info.Instances to find the inferred
type for more cases now.
Updates #59338.
Fixes#59955.
Change-Id: I9b6465395869459c2387d0424febe7337b28b90e
Reviewed-on: https://go-review.googlesource.com/c/go/+/492455
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This CL enhances the tighten pass. Previously if a value has memory arg,
then the tighten pass won't move it, actually if the memory state is
consistent among definition and use block, we can move the value. This
CL optimizes this case. This is useful for the following situation:
b1:
x = load(...mem)
if(...) goto b2 else b3
b2:
use(x)
b3:
some_op_not_use_x
For the micro-benchmark mentioned in #56620, the performance improvement
is about 15%.
There's no noticeable performance change in the go1 benchmark.
Fixes#56620
Change-Id: I9b152754f27231f583a6995fc7cd8472aa7d390c
Reviewed-on: https://go-review.googlesource.com/c/go/+/458755
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
Put zero-sized data symbols at same address as runtime.zerobase,
so zero-sized global variables have the same address as zero-sized
allocations.
Change-Id: Ib3145dc1b663a9794dfabc0e6abd2384960f2c49
Reviewed-on: https://go-review.googlesource.com/c/go/+/490435
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.
Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.
This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.
before after
stackNosplit 800 800
_StackGuard 928 928
stackNosplit -race 1728 1600
_StackGuard -race 1856 1728
For #59670.
Change-Id: Ia94094c5e47897e7c088d24b4a5e33f5c2768db5
Reviewed-on: https://go-review.googlesource.com/c/go/+/486976
Auto-Submit: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit CL 486380.
Submitted out of order and breaks bootstrap.
Change-Id: I67bd225094b5c9713b97f70feba04d2c99b7da76
Reviewed-on: https://go-review.googlesource.com/c/go/+/486916
Reviewed-by: David Chase <drchase@google.com>
TryBot-Bypass: Austin Clements <austin@google.com>
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.
Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.
This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.
before after
stackNosplit 800 800
_StackGuard 928 928
stackNosplit -race 1728 1600
_StackGuard -race 1856 1728
For #59670.
Change-Id: Ibe20825ebe0076bbd7b0b7501177b16c9dbcb79e
Reviewed-on: https://go-review.googlesource.com/c/go/+/486380
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Marking variables in erroneous variable declarations as used is
convenient for tests but doesn't necessarily hide follow-on errors
in real code: either the variable is not supposed to be declared in
the first place and then we should get an error if it is not used,
or it is there because it is intended to be used, and the we expect
an error it if is not used.
This brings types2 closer to go/types.
Change-Id: If7ee1298fc770f7ad0cefe7e968533fd50ec2343
Reviewed-on: https://go-review.googlesource.com/c/go/+/486175
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add more rules to ensure that order doesn't matter.
Add memequal 0 rule.
Try to use a constant argument to memequal when one is available.
Fixes#59684
Change-Id: I36e85ffbd949396ed700ed6e8ec2bc3ae013f5d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/485535
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit http://go.dev/cl//484859
Reason for revert: causes linker errors in a number of google-internal tests.
Change-Id: I322252f784a46d2b1d447ebcdca86ce14bc0cc91
Reviewed-on: https://go-review.googlesource.com/c/go/+/485755
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis, then later fixed
fist with an attempt in CL 482355, then again in 484859 .]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Updates #56102.
Change-Id: I6e938d596992ffb473cf51e7e598f372ce08deb0
Reviewed-on: https://go-review.googlesource.com/c/go/+/484860
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This patch generalizes the code in the inliner that marks unreferenced
hidden closure functions as dead. Rather than doing the marking on the
fly (previous approach), this new approach does a single pass at the
end of inlining, which catches more dead functions.
Fixes#59638.
Updates #59404.
Updates #59547.
Change-Id: I54fd63e9e37c9123b08a3e7def7d1989919bba91
Reviewed-on: https://go-review.googlesource.com/c/go/+/484859
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 399694 added constant-fold switch early in compilation. So function:
func f() string {
switch intSize {
case 32:
return "32"
case 64:
return "64"
default:
panic("unreachable")
}
}
will be constant-fold to:
func f() string {
switch intSize {
case 64:
return "64"
}
}
When this function get inlined, there is a check whether we can delay
declaring the result parameter until the "return" statement. For the
original function, we can't delay the result, because there's more than
one return statement. However, the constant-fold one can, because
there's on one return statement in the body now. The result parameter
~R0 ends up declaring inside the switch statement scope.
Now, when walking the switch statement, it's re-written into if-else
statement. Without typecheck.EvalConst, the if condition "if 64 == 64"
is passed as-is to the ssa generation pass. Because "64 == 64" is not a
constant, the ssagen creates normal blocks for branching the results.
This confuses the liveness analysis, because ~R0 is only live inside the
if block. With typecheck.EvalConst, "64 == 64" is evaluated to "true",
so ssagen can branch the result without emitting conditional blocks.
Instead, the constant-fold can be re-written as:
switch {
case true:
// Body
}
So it does not depend on the delay results check during inlining. Adding
a test, which will fail when typecheck.EvalConst is removed, so we can
do the cleanup without breaking things.
Change-Id: I638730bb147140de84260653741431b807ff2f15
Reviewed-on: https://go-review.googlesource.com/c/go/+/484316
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Static init inliner is using typecheck.EvalConst to handle string
concatenation expressions. But static init inliner may reveal constant
expressions after substitution, and the compiler needs to evaluate those
expressions in non-constant semantic. Using typecheck.EvalConst, which
always evaluates expressions in constant semantic, is not the right
choice.
For safety, this CL fold the logic to handle string concatenation to
static init inliner, so there won't be regression in handling constant
expressions in non-constant semantic. And also, future CL can simplify
typecheck.EvalConst logic.
Updates #58293
Updates #58339Fixes#58439
Change-Id: I74068d99c245938e576afe9460cbd2b39677bbff
Reviewed-on: https://go-review.googlesource.com/c/go/+/466277
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
(This is a retry of CL 462035 which was reverted at 474976.
The only change from that CL is the aix fix SRODATA->SNOPTRDATA
at inittask.go:141)
As described here:
https://github.com/golang/go/issues/31636#issuecomment-493271830
"Find the lexically earliest package that is not initialized yet,
but has had all its dependencies initialized, initialize that package,
and repeat."
Simplify the runtime a bit, by just computing the ordering required
in the linker and giving a list to the runtime.
Update #31636Fixes#57411
RELNOTE=yes
Change-Id: I28c09451d6aa677d7394c179d23c2c02c503fc56
Reviewed-on: https://go-review.googlesource.com/c/go/+/478916
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This reverts commit http://go.dev/cl/c/482356.
Reason for revert: Reverting this change again, since it is causing additional failures in google-internal testing.
Change-Id: I9234946f62e5bb18c2f873a65e8b298d04af0809
Reviewed-on: https://go-review.googlesource.com/c/go/+/484735
Reviewed-by: Florian Zenker <floriank@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Auto-Submit: Than McIntosh <thanm@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Range statement will mutate the key and value, so we should treat them as reassigned.
Fixes#59572
Change-Id: I9c6b67d938760a0c6a1d9739f2737c67af4a3a10
Reviewed-on: https://go-review.googlesource.com/c/go/+/483855
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes#58141
Co-authored-by: Richard Musiol <neelance@gmail.com>
Co-authored-by: Achille Roussel <achille.roussel@gmail.com>
Co-authored-by: Julien Fabre <ju.pryz@gmail.com>
Co-authored-by: Evan Phoenix <evan@phx.io>
Change-Id: I49b66946acc90fdf09ed9223096bfec9a1e5b923
Reviewed-on: https://go-review.googlesource.com/c/go/+/479627
Run-TryBot: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Johan Brandhorst-Satzkorn <johan.brandhorst@gmail.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Bypass: Ian Lance Taylor <iant@golang.org>
For now, only apply the rule if either of arguments are constants. That
would catch a lot of real user code, without slowing down the compiler
with code generated for string comparison (experience in CL 410336).
Updates #57959Fixes#45928
Change-Id: Ie2e830d6d0d71cda3947818b22c2775bd94f7971
Reviewed-on: https://go-review.googlesource.com/c/go/+/483359
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
So iterators that are in progress can know entries have been deleted and
terminate the iterator properly.
Update #55002
Update #56351Fixes#59411
Change-Id: I924f16a00fe4ed6564f730a677348a6011d3fb67
Reviewed-on: https://go-review.googlesource.com/c/go/+/481935
Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Use the type of the store for the byteswap, not the type of the
store's value argument.
Normally when we're storing a 16-bit value, the value being stored is
also typed as 16 bits. But sometimes it is typed as something smaller,
usually because it is the result of an upcast from a smaller value,
and that upcast needs no instructions.
If the type of the store's arg is thinner than the type being stored,
and the byteswap'd value uses that thinner type, and the byteswap'd
value needs to be spilled & restored, that spill/restore happens using
the thinner type, which causes us to lose some of the top bits of the
value.
Fixes#59367
Change-Id: If6ce1e8a76f18bf8e9d79871b6caa438bc3cce4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/481395
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
[This is a roll-forward of CL 479095, which was reverted due to a bad
interaction between inlining and escape analysis since fixed in CL 482355.]
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Updates #56102.
Change-Id: I1f4fc96c71609c8feb59fecdb92b69ba7e3b5b41
Reviewed-on: https://go-review.googlesource.com/c/go/+/482356
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When a closure is inlined, it may contain other hidden closures, which
the inliner will duplicate, rendering the original nested closures as
unreachable. Because they are unreachable, they don't get processed in
escape analysis, meaning that go/defer statements don't get rewritten,
which can then in turn trigger errors in walk. This patch looks for
nested hidden closures and marks them as dead, so that they can be
skipped later on in the compilation flow. NB: if during escape
analysis we rediscover a hidden closure (due to an explicit reference)
that was previously marked dead, revive it at that point.
Fixes#59404.
Change-Id: I76db1e9cf1ee38bd1147aeae823f916dbbbf081b
Reviewed-on: https://go-review.googlesource.com/c/go/+/482355
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Currently, the prove pass can get knowledge from some specific logic
operators only before the CFG is explored, which means that the bounds
information of the branch will be ignored.
This CL updates the facts table by the logic operators in every
branch. Combined with the branch information, this will be helpful for
BCE in some circumstances.
Fixes#57243
Change-Id: I0bd164f1b47804ccfc37879abe9788740b016fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/419555
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Unified IR already records the correct type for them.
Fixes#59378
Change-Id: I275c45b48f67bde55c8e2079d60b5868d0acde7f
Reviewed-on: https://go-review.googlesource.com/c/go/+/481555
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Casting to a *uintptr is not ok if there isn't at least 8 bytes of
data backing that pointer (on 64-bit archs).
So although we end up making a slice of 0 length with that pointer,
the cast itself doesn't know that.
Instead, bail early if the result is going to be 0 length.
Fixes#59334
Change-Id: Id3c0e09d341d838835c0382cccfb0f71dc3dc7e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/480575
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Currently, when the inliner is determining if a function is
inlineable, it descends into the bodies of closures constructed by
that function. This has several unfortunate consequences:
- If the closure contains a disallowed operation (e.g., a defer), then
the outer function can't be inlined. It makes sense that the
*closure* can't be inlined in this case, but it doesn't make sense
to punish the function that constructs the closure.
- The hairiness of the closure counts against the inlining budget of
the outer function. Since we currently copy the closure body when
inlining the outer function, this makes sense from the perspective
of export data size and binary size, but ultimately doesn't make
much sense from the perspective of what should be inlineable.
- Since the inliner walks into every closure created by an outer
function in addition to starting a walk at every closure, this adds
an n^2 factor to inlinability analysis.
This CL simply drops this behavior.
In std, this makes 57 more functions inlinable, and disallows inlining
for 10 (due to the basic instability of our bottom-up inlining
approach), for an net increase of 47 inlinable functions (+0.6%).
This will help significantly with the performance of the functions to
be added for #56102, which have a somewhat complicated nesting of
closures with a performance-critical fast path.
The downside of this seems to be a potential increase in export data
and text size, but the practical impact of this seems to be
negligible:
│ before │ after │
│ bytes │ bytes vs base │
Go/binary 15.12Mi ± 0% 15.14Mi ± 0% +0.16% (n=1)
Go/text 5.220Mi ± 0% 5.237Mi ± 0% +0.32% (n=1)
Compile/binary 22.92Mi ± 0% 22.94Mi ± 0% +0.07% (n=1)
Compile/text 8.428Mi ± 0% 8.435Mi ± 0% +0.08% (n=1)
Change-Id: Ie9e38104fed5689a94c368288653fd7cb4b7a35e
Reviewed-on: https://go-review.googlesource.com/c/go/+/479095
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
The cast is proceeded by a bounds check. If the bounds check passes
then we know the pointer in the slice is non-nil.
... except casts to pointers of 0-sized arrays. They are strange, as
the bounds check can pass for a nil input.
Change-Id: Ic01cf4a82d59fbe3071d4b271c94efca9cafaec1
Reviewed-on: https://go-review.googlesource.com/c/go/+/479335
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Change the Checker.use/useLHS functions to report if all "used"
expressions evaluated without error. Use that information to
control whether to report an assignment mismatch error or not.
This will reduce the number of errors reported per assignment,
where the assignment mismatch is only one of the errors.
Change-Id: Ia0fc3203253b002e4e1d5759d8d5644999af6884
Reviewed-on: https://go-review.googlesource.com/c/go/+/478756
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
For #55242
Change-Id: I092b1881623ea997b178d038c0afd10cd5bca937
Reviewed-on: https://go-review.googlesource.com/c/go/+/479898
Reviewed-by: Than McIntosh <thanm@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
unsafe.SliceData can return pointers which are nil. That function gets
lowered to the SSA OpSlicePtr, which the compiler assumes is non-nil.
This used to be the case as OpSlicePtr was only used in situations
where the bounds check already passed. But with unsafe.SliceData that
is no longer the case.
There are situations where we know it is nil. Use Bounded() to
indicate that.
I looked through all the uses of OSPTR and added SetBounded where it
made sense. Most OSPTR results are passed directly to runtime calls
(e.g. memmove), so even if we know they are non-nil that info isn't
helpful.
Fixes#59293
Change-Id: I437a15330db48e0082acfb1f89caf8c56723fc51
Reviewed-on: https://go-review.googlesource.com/c/go/+/479896
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
As with changes in prior CLs, we don't suppress legitimate
"declared but not used" errors anymore simply because the
respective variables are used in incorrect assignments,
unrelated to the variables in question.
Adjust several (ancient) tests accordingly.
Change-Id: I5826393264d9d8085c64777a330d4efeb735dd2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/478716
Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
This CL re-introduces useLHS because we don't want to suppress
correct "declared but not used" errors for variables that only
appear on the LHS of an assignment (using Checker.use would mark
them as used).
This CL also adjusts a couple of places where types2 differed
from go/types (and suppressed valid "declared and not used"
errors). Now those errors are surfaced. Adjusted a handful of
tests accordingly.
Change-Id: Ia555139a05049887aeeec9e5221b1f41432c1a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/478635
Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Robert Griesemer <gri@google.com>
Don't say "array length must be integer" if it is in fact an integer.
Fixes#59209
Change-Id: If60b93a0418f5837ac334412d3838eec25eeb855
Reviewed-on: https://go-review.googlesource.com/c/go/+/479115
Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the Sizes API, recognize an overflow (to a negative value) as a
consequence of an oversize value, and specify as such in the API.
Adjust the various size computations to take overflow into account.
Recognize a negative size or offset as an error and report it rather
than panicking.
Use the same protocol for results provided by the default (StdSizes)
and external Sizes implementations.
Add a new error code TypeTooLarge for the new errors.
Fixes#59190.
Fixes#59207.
Change-Id: I8c33a9e69932760275100112dde627289ac7695b
Reviewed-on: https://go-review.googlesource.com/c/go/+/478919
Run-TryBot: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Robert Griesemer <gri@google.com>
Reviewed-by: Robert Griesemer <gri@google.com>
Under the right conditions we can optimize cmp comparisons to cmn
comparisons, such as:
func foo(a, b int) int {
var c int
if a + b < 0 {
c = 1
}
return c
}
Previously it's compiled as:
ADD R1, R0, R1
CMP $0, R1
CSET LT, R0
With this CL it's compiled as:
CMN R1, R0
CSET MI, R0
Here we need to pay attention to the overflow situation of a+b, the MI
flag means N==1, which doesn't honor the overflow flag V, its value
depends only on the sign of the result. So it has the same semantic of
the Go code, so it's correct.
Similarly, this CL also optimizes the case of >= comparison
using the PL conditional flag.
Change-Id: I47179faba5b30cca84ea69bafa2ad5241bf6dfba
Reviewed-on: https://go-review.googlesource.com/c/go/+/476116
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For #59169
Change-Id: Id72ad9fe8b6e1d7cf64f972520ae8858f70c025a
Reviewed-on: https://go-review.googlesource.com/c/go/+/478217
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
Add the following common local transformations
(t + x) - (t + y) == x - y
(t + x) - (y + t) == x - y
(x + t) - (y + t) == x - y
(x + t) - (t + y) == x - y
(x - t) + (t + y) == x + y
(x - t) + (y + t) == x + y
The compiler itself matches such patterns many times. This also aligns with other popular compilers.
Fixes#59111
Change-Id: Ibdfdb414782f8fcaa20b84ac5d43d0d9ae2c7b60
GitHub-Last-Rev: 1aad82e62e
GitHub-Pull-Request: golang/go#59119
Reviewed-on: https://go-review.googlesource.com/c/go/+/477555
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
This CL add support for instrinsifying the TrialingZeros{8,32,64}
functions for 386 architecture. We need handle the case when the input
is 0, which could lead to undefined output from the BSFL instruction.
Next CL will remove the assembly code in runtime/internal/sys package.
Change-Id: Ic168edf68e81bf69a536102100fdd3f56f0f4a1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/475735
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This patch changes the relative order of "CanInline" and "InlineCalls"
operations within the inliner for clumps of functions corresponding to
strongly connected components in the call graph. This helps increase
the amount of inlining within SCCs, particularly in Go's runtime
package, which has a couple of very large SCCs.
For a given SCC of the form { fn1, fn2, ... fnk }, the inliner would
(prior to this point) walk through the list of functions and for each
function first compute inlinability ("CanInline") and then perform
inlining ("InlineCalls"). This meant that if there was an inlinable
call from fn3 to fn4 (for example), this call would never be inlined,
since at the point fn3 was visited, we would not have computed
inlinability for fn4.
We now do inlinability analysis for all functions in an SCC first,
then do actual inlining for everything. This results in 47 additional
inlines in the Go runtime package (a fairly modest increase
percentage-wise of 0.6%).
Updates #58905.
Change-Id: I48dbb1ca16f0b12f256d9eeba8cf7f3e6dd853cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/474955
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This reverts commit ce2a609909.
aka CL 462035
Reason for revert: this CL is causing some problems in some internal Google programs.
Change-Id: I4476b8d8d2c3d7b5703d1d85c93baebb4b4e5d26
Reviewed-on: https://go-review.googlesource.com/c/go/+/474976
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This issue has been fixed with unified IR, so just add a test.
Update #53087
Change-Id: I965d9f27529fa6b7c89e2921c65e5a100daeb9fe
Reviewed-on: https://go-review.googlesource.com/c/go/+/410197
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Auto-Submit: Keith Randall <khr@google.com>
On ARM64, in -dynlink mode (building a shared library or a plugin),
accessing global variable is made using the GOT. Currently, the
GOT accessing instruction sequence our assembler generates doesn't
handle large offset well, so we don't fold the offset into loads
and stores in the compiler. Currently, the rewrite rules are
guarded with the -shared flag. However, the GOT access
instructions are only generated in the -dynlink mode (which
implies -shared, but not the other direction).
CL 445535 attempted to remove the guard althgether. But that
causes build failure for -dynlink mode for the reason above. This
CL changes it to guard specifically on -dynlink mode, allowing
the optimization in more cases (-shared but not -dynlink build
modes).
Updates #58826.
Change-Id: I1391db6a33e8d0455a304e7cae7fcfdeb49bfdab
Reviewed-on: https://go-review.googlesource.com/c/go/+/473999
Run-TryBot: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Adds:
GOEXPERIMENT=loopvar (expected way of invoking)
-d=loopvar={-1,0,1,2,11,12} (for per-package control and/or logging)
-d=loopvarhash=... (for hash debugging)
loopvar=11,12 are for testing, benchmarking, and debugging.
If enabled,for loops of the form `for x,y := range thing`, if x and/or
y are addressed or captured by a closure, are transformed by renaming
x/y to a temporary and prepending an assignment to the body of the
loop x := tmp_x. This changes the loop semantics by making each
iteration's instance of x be distinct from the others (currently they
are all aliased, and when this matters, it is almost always a bug).
3-range with captured iteration variables are also transformed,
though it is a more complex transformation.
"Optimized" to do a simpler transformation for
3-clause for where the increment is empty.
(Prior optimization of address-taking under Return disabled, because
it was incorrect; returns can have loops for children. Restored in
a later CL.)
Includes support for -d=loopvarhash=<binary string> intended for use
with hash search and GOCOMPILEDEBUG=loopvarhash=<binary string>
(use `gossahash -e loopvarhash command-that-fails`).
Minor feature upgrades to hash-triggered features; clients can specify
that file-position hashes use only the most-inline position, and/or that
they use only the basenames of source files (not the full directory path).
Most-inlined is the right choice for debugging loop-iteration change
once the semantics are linked to the package across inlining; basename-only
makes it tractable to write tests (which, otherwise, depend on the full
pathname of the source file and thus vary).
Updates #57969.
Change-Id: I180a51a3f8d4173f6210c861f10de23de8a1b1db
Reviewed-on: https://go-review.googlesource.com/c/go/+/411904
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
As described here:
https://github.com/golang/go/issues/31636#issuecomment-493271830
"Find the lexically earliest package that is not initialized yet,
but has had all its dependencies initialized, initialize that package,
and repeat."
Simplify the runtime a bit, by just computing the ordering required
in the linker and giving a list to the runtime.
Update #31636Fixes#57411
RELNOTE=yes
Change-Id: I1e4d3878ebe6e8953527aedb730824971d722cac
Reviewed-on: https://go-review.googlesource.com/c/go/+/462035
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
A 0-sized no-op shouldn't prevent us from detecting that the first
instruction is from an inlined callee.
Update #58300
Change-Id: Ic5f6ed108c54a32c05e9b2264b516f2cc17e4619
Reviewed-on: https://go-review.googlesource.com/c/go/+/467977
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The assertion here was to make sure the newly constructed and
typechecked expression selected the same receiver-qualified method,
but in the case of anonymous receiver types we can actually end up
with separate types.Field instances corresponding to each types.Type
instance. In that case, the assertion spuriously failed.
The fix here is to relax and assertion and just compare the method's
name and type (including receiver type).
Fixes#58563.
Change-Id: I67d51ddb020e6ed52671473c93fc08f283a40886
Reviewed-on: https://go-review.googlesource.com/c/go/+/471676
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
On Arm64, all 32-bit instructions will ignore the upper 32 bits and
clear them to zero for the result. No need to do an unsign extend before
a 32 bit op.
This CL removes the redundant unsign extension only for the existing
32-bit opcodes, and also omits the sign extension when the upper bit of
the result can be predicted.
Fixes#42162
Change-Id: I61e6670bfb8982572430e67a4fa61134a3ea240a
CustomizedGitHooks: yes
Reviewed-on: https://go-review.googlesource.com/c/go/+/427454
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Eric Fang <eric.fang@arm.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Eric Fang <eric.fang@arm.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
As motivated on the issue, we want to move the functionality of the
run.go program to happen via a normal go test. Each .go test case in
the GOROOT/test directory gets a subtest, and cmd/go's support for
parallel test execution replaces run.go's own implementation thereof.
The goal of this change is to have fairly minimal and readable diff
while making an atomic changeover. The working directory is modified
during the test execution to be GOROOT/test as it was with run.go,
and most of the test struct and its run method are kept unchanged.
The next CL in the stack applies further simplifications and cleanups
that become viable.
There's no noticeable difference in test execution time: it takes around
60-80 seconds both before and after on my machine. Test caching, which
the previous runner lacked, can shorten the time significantly.
For #37486.
Fixes#56844.
Change-Id: I209619dc9d90e7529624e49c01efeadfbeb5c9ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/463276
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When inlining functions that contain function literals, we need to be
careful about position information. The OCLOSURE node should use the
inline-adjusted position, but the ODCLFUNC and its body should use the
original positions.
However, the same problem can arise with certain generic constructs,
which require the compiler to synthesize function literals to insert
dictionary arguments.
go.dev/cl/425395 fixed the issue with user-written function literals
in a somewhat kludgy way; this CL extends the same solution to
synthetic function literals.
This is all quite subtle and the solutions aren't terribly robust, so
longer term it's probably desirable to revisit how we track inlining
context for positions. But for now, this seems to be the least bad
solution, esp. for backporting to 1.20.
Updates #54625.
Fixes#58513.
Change-Id: Icc43a70dbb11a0e665cbc9e6a64ef274ad8253d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/468415
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Some integer comparisons with 1 and -1 can be rewritten as comparisons
with 0. For example, x < 1 is equivalent to x <= 0. This is an
advantageous transformation on riscv64 because comparisons with zero
do not require a constant to be loaded into a register. Other
architectures will likely benefit too and the transformation is
relatively benign on architectures that do not benefit.
Change-Id: I2ce9821dd7605a660eb71d76e83a61f9bae1bf25
Reviewed-on: https://go-review.googlesource.com/c/go/+/350831
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Munday <mike.munday@lowrisc.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
For go/defer calls like "defer f(x, y)", the compiler rewrites it to:
x1, y1 := x, y
defer func() { f(x1, y1) }()
However, if "f" needs runtime type information, the "RType" field will
refer to the outer ".dict" param, causing wrong liveness analysis.
To fix this, if "f" refers to outer ".dict", the dict param will be
copied to an autotmp, and "f" will refer to this autotmp instead.
Fixes#58341
Change-Id: I238b6e75441442b5540d39bc818205398e80c94d
Reviewed-on: https://go-review.googlesource.com/c/go/+/466035
Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
There are a plenty of regression in 1.20 with this optimization. This CL
disable inline static init, so it's safer to backport to 1.20 branch.
The optimization will be enabled again during 1.21 cycle.
Updates #58293
Updates #58339
For #58293
Change-Id: If5916008597b46146b4dc7108c6b389d53f35e95
Reviewed-on: https://go-review.googlesource.com/c/go/+/467015
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This patch fixes a panic from incorrect interface conversion from
*ir.BasicLit to *ir.ConstExpr. This only occurs when nounified
GOEXPERIMENT is set, so ideally it should be backported to Go
1.20 and removed from master.
Fixes#58339
Change-Id: I357069d7ee1707d5cc6811bd2fbdd7b0456323ae
GitHub-Last-Rev: 641dedb5f9
GitHub-Pull-Request: golang/go#58389
Reviewed-on: https://go-review.googlesource.com/c/go/+/466175
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@google.com>
Since go1.19, these errors are already reported by types2 for any user's
Go code. Compiler generated code, which looks like constant expression
should be evaluated as non-constant semantic, which allows overflows.
Fixes#58293
Change-Id: I6f0049a69bdb0a8d0d7a0db49c7badaa92598ea2
Reviewed-on: https://go-review.googlesource.com/c/go/+/465096
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
This gets eliminated by thoses rules above:
// for rewriting results of some late-expanded rewrites (below)
(SelectN [0] (MakeResult x ___)) => x
(SelectN [1] (MakeResult x y ___)) => y
(SelectN [2] (MakeResult x y z ___)) => z
Fixes#58161
Change-Id: I4fbfd52c72c06b6b3db906bd9910b6dbb7fe8975
Reviewed-on: https://go-review.googlesource.com/c/go/+/463846
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
The BSWAPL instruction is supported in i486 and newer.
https://github.com/golang/go/wiki/MinimumRequirements#386 says we
support "All Pentium MMX or later". The Pentium is also referred to as
i586, so that we are safe with these instructions.
Change-Id: I6dea1f9d864a45bb07c8f8f35a81cfe16cca216c
Reviewed-on: https://go-review.googlesource.com/c/go/+/465515
Run-TryBot: Wayne Zuo <wdvxdr@golangcn.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Blank node must be ignored when building arguments substitued tree.
Otherwise, it could be used to replace other blank node in left hand
side of an assignment, causing an invalid IR node.
Consider the following code:
type S1 struct {
s2 S2
}
type S2 struct{}
func (S2) Make() S2 {
return S2{}
}
func (S1) Make() S1 {
return S1{s2: S2{}.Make()}
}
var _ = S1{}.Make()
After staticAssignInlinedCall, the assignment becomes:
var _ = S1{s2: S2{}.Make()}
and the arg substitued tree is "map[*ir.Name]ir.Node{_: S1{}}". Now,
when doing static assignment, if there is any assignment to blank node,
for example:
_ := S2{}
That blank node will be replaced with "S1{}":
S1{} := S2{}
So constructing an invalid IR which causes the ICE.
Fixes#58325
Change-Id: I21b48357f669a7e02a7eb4325246aadc31f78fb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/465098
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: David Chase <drchase@google.com>
CL 458619 fixed the problem un-intentionally, so adding test to prevent
regression happening.
Updates #58345
Change-Id: I80cf60716ef85e142d769e8621fce19c826be03d
Reviewed-on: https://go-review.googlesource.com/c/go/+/465455
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
People are using this to get the name of the function from a function type:
runtime.FuncForPC(reflect.ValueOf(fn).Pointer()).Name()
Unfortunately, this technique falls down when the first instruction
of the function is from an inlined callee. Then the expression above
gets you the name of the inlined function instead of the function itself.
To fix this, ensure that the first instruction is never from an inlinee.
Normally functions have prologs so those are already fine. In just the
cases where a function is a leaf with no local variables, and an instruction
from an inlinee appears first in the prog list, add a nop at the start
of the function to hold a non-inlined position.
Consider the nop a "mini-prolog" for leaf functions.
Fixes#58300
Change-Id: Ie37092f4ac3167fe8e5ef4a2207b14abc1786897
Reviewed-on: https://go-review.googlesource.com/c/go/+/465076
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
This CL adds rules that replaces instances of ISEL that produce
a boolean result based on a condition register by SETBC/SETBCR
operations. On Power10 these are convereted to SETBC/SETBCR
instructions that use one register instead of 3 registers
conventionally used by ISEL and hence reduces register pressure.
On loops written specifically to exercise such instances of ISEL
extensively, a performance improvement of 2.5% is seen on Power10.
Also added verification tests to verify correct generation of
SETBC/SETBCR instructions on Power10.
Change-Id: Ib719897f09d893de40324440a43052dca026e8fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/449795
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Archana Ravindar <aravind5@in.ibm.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
