This is a pure rename of the respective Go functions/methods
with corresponding adjustments to error messages and tests.
A couple of comments were manually rephrased.
With this change, the implementation and error messages match
the latest spec.
No functionality change.
Change-Id: Iaa92a08b64756356fb2c5abdaca5c943c9105c96
Reviewed-on: https://go-review.googlesource.com/c/go/+/384618
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
It has moved to golang.org/x/exp/constraints. Perhaps it will move
back to the standard library in a future release.
For golang/go#45458Fixesgolang/go#50792
Change-Id: I93aa251a7afe7b329a3d3faadc0c5d6388b1f0e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/382460
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
We can type-check these fine but the API implications are unclear.
Fixes#50912.
For #50937.
Change-Id: If29bbb4a257ff6a85e3bfcd4755fd8f90c80fb87
Reviewed-on: https://go-review.googlesource.com/c/go/+/382116
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
- Use the correct predicate in Checker.implements: for interfaces
we cannot use the API Comparable because it always returns true
for all non-type parameter interface types: Comparable simply
answers if == and != is permitted, and it's always been permitted
for interfaces. Instead we must use Interface.IsComparable which
looks at the type set of an interface.
- When comparing interfaces for identity, we must also consider the
whether the type sets have the comparable bit set.
With this change, `any` doesn't implement `comparable` anymore. This
only matters for generic functions and types, and the API functions.
It does mean that for now (until we allow type-constrained interfaces
for general non-constraint use, at some point in the future) a type
parameter that needs to be comparable cannot be instantiated with an
interface anymore.
For #50646.
Change-Id: I7e7f711bdcf94461f330c90509211ec0c2cf3633
Reviewed-on: https://go-review.googlesource.com/c/go/+/381254
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
For a composite literal expression like []T{{f: 1}}, we allow T to be
a pointer to struct type, so it's consistent to allow T to also be a
type parameter whose structural type is a pointer to struct type.
Fixes#50833.
Change-Id: Ib0781ec4a4f327c875ea25b97740ff2c0c86b916
Reviewed-on: https://go-review.googlesource.com/c/go/+/381075
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add a missing shape check in (*Tsubster).tinter when substituting on a
generic type which is an empty interface, analogous to same check in
(*Tsubster).tstruct. Empty structs/interfaces that have rparams (i.e.
are a generic type or a shape type) need to get a new type of their
rparams - they will be different even though they don't have any
fields/methods. Without this shape check, we were not correctly
completing the Token[int] type during substitution in the example in the
issue. This issue only happens for a generic type which is an empty
interface (i.e. doesn't actually use the type param, hence quite unusual).
Added the test case already created by Keith.
Fixes#50841
Change-Id: Ia985b9f52c0e87ed0647b46373e44c51cb748ba4
Reviewed-on: https://go-review.googlesource.com/c/go/+/381175
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For #50646.
Change-Id: I7420545556e0df2659836364a62ce2c32ad7a8b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/380654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
We have disallowed having a typeparam on the right-hand-side of a type
declaration. So, we disabled much of the test absdiff.go. I recently
wrote a new test absdiff2.go to use a structure containing the type
param type, so I could attach a method properly and run the full test.
As a contrast, I thought I would create absdiff3.go, where the Abs
functionality is passed in as a function callback (but derived from a
generic function). This is simpler, and more inline with some of the
guidelines that Ian has been proposing (use passed-in functions rather
than requiring methods, when possible, for greater ease-of-use).
Only adds a new test absdiff3.go. (And fixes a comment in absdiff2.go.)
Change-Id: I6dd185b50a3baeec31f689a892319963468a7201
Reviewed-on: https://go-review.googlesource.com/c/go/+/380774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Added a new absdiff2.go test case, which works fully without using a
typeparam on the right-hand-side of a type declaration (which is
disallowed). Fixed an issue that the test revealed, which is that we
need to set g.curDecl properly for the "later" functions which are
deferred until after all declarations are initially processed. Also,
g.curDecl may be non-nil in typeDecl for local type declaration. So, we
adjust the associate assertion, and save/restore g.curDecl
appropriately.
Fixes#50790
Change-Id: Ieed76a7ad0a83bccb99cbad4bf98a7bfafbcbbd3
Reviewed-on: https://go-review.googlesource.com/c/go/+/380594
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
By processing non-alias type declarations before alias type declaration,
and those before everything else we can avoid some of the remaining
errors which are due to alias types not being available.
For #25838.
For #50259.
For #50276.
For #50729.
Change-Id: I233da2899a6d4954c239638624dfa8c08662e6b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/380056
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The type checker doesn't have a general mechanism to "use" the type
of a type alias whose type depends on a recursive type declaration
which is not yet completely type-checked. In some cases, the type of
a type alias is needed before it is determined; the type is incorrect
(invalid) in that case but no error is reported. The type-checker is
happy with this (incorrect type), but the compiler may crash under
some circumstances.
A correct fix will likely require some form of forwarding type which
is a fairly pervasive change and may also affect the type checker API.
This CL introduces a simple side table, a map of broken type aliases,
which is consulted before the type associated with a type alias is
used. If the type alias is broken, an error is reported.
This is a stop-gap solution that prevents the compiler from crashing.
The reported error refers to the corresponding issue which suggests
a work-around that may be applicable in some cases.
Also fix a minor error related to type cycles: If we have a cycle
that doesn't start with a type, don't use a compiler error message
that explicitly mentions "type".
Fixes#50259.
Fixes#50276.
Fixes#50779.
For #50729.
Change-Id: Ie8e38f49ef724e742e8e78625e6d4f3d4014a52c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379916
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In validType, when we see an instantiated type, proceed as with
non-generic types but provide an environment in which to look up
the values (the corresponding type arguments) of type parameters
of the instantiated type. For each type parameter for which there
is a type argument, proceed with validating that type argument.
This corresponds to applying validType to the instantiated type
without actually instantiating the type (and running into infinite
instantiations in case of invalid recursive types).
Also, when creating a type instance, use the correct source position
for the instance (the start of the qualified identifier if we have an
imported type).
Fixes#48962.
Change-Id: I196c78bf066e4a56284d53368b2eb71bd8d8a780
Reviewed-on: https://go-review.googlesource.com/c/go/+/379414
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Given we have support for field access to type params with a single
structural type, we need to distinguish between methods calls and field
access when we have an OXDOT node on an expression which is a typeparam
(or correspondingly a shape). We were missing checks in getInstInfo,
which figures out the dictionary format, which then caused problems when
we generate the dictionaries. We don't need/want dictionary entries for
field access, only for bound method calls. Added a new function
isBoundMethod() to distinguish OXDOT nodes which are bound calls vs.
field accesses on a shape.
Removed isShapeDeref() - we can't have field access or method call on a
pointer to variable of type param type.
Fixes#50690
Change-Id: Id692f65e6f427f28cd2cfe474dd30e53c71877a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/379674
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
In a method declaration "func (f *Foo[_, _]) String() string { ... }",
the two blank typeparams have the same name, but our current design with
types1 needs unique names for type params. Similarly, for export/import,
we need unique names to keep the type params straight in generic types
and connect the proper type param with the proper constraint. We make
blank type params unique by changing them to $1, $2, etc in noder.typ0()
via typecheck.TparamExportName(). We then revert $<num> back to _ during
type2 import via typecheck.TparamName(). We similarly revert
during gcimporter import. We don't need/want to revert in the types1
importer, since we want unique names for type params.
Rob Findley has made a similar change to x/tools (and we tried to make
the source code changes similar for the gcimporter and types2 importer
changes).
Fixes#50419
Change-Id: I855cc3d90d06bcf59541ed0c879e9a0e4ede45bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/379194
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Most CONVIFACEs are created in the transform phase (or old typechecker,
in -G=0 mode). But if the main result of a multi-value assignment (map,
channel, or dot-type) must be converted to an interface during the
assignment, that CONVIFACE is not created until (*orderState).as2ok in
the order phase (because the AS2* ops and their sub-ops are so tightly
intertwined). But we need to create the CONVIFACE during the
stenciling/transform phase to enable dictionary lookups. So, in
transformAssign(), if we are doing a special multi-value assignment
involving a type-param-derived type, assign the results first to temps,
so that we can manifest the CONVIFACE during the transform in assigning
the first temp to lhs[0].
Added a test for both AS2RECV (channel receives) and AS2MAPR (maps). I
don't think we can have a type assertion on a type-param-derived type.
Fixes#50642
Change-Id: I4d079fc46c93d8494d7db4ea8234d91522edb02a
Reviewed-on: https://go-review.googlesource.com/c/go/+/379054
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In the compiler, we need to distinguish field and method access on a
type param. For field access, we avoid the dictionary access (to create
an interface bound) and just do the normal transformDot() (which will
create the field access on the shape type).
This field access works fine for non-pointer types, since the shape type
preserves the underlying type of all types in the shape. But we
generally merge all pointer types into a single shape, which means the
field will not be accessible via the shape type. So, we need to change
Shapify() so that a type which is a pointer type is mapped to its
underlying type, rather than being merged with other pointers.
Because we don't want to change the export format at this point in the
release, we need to compute StructuralType() directly in types1, rather
than relying on types2. That implementation is in types/type.go, along
with the helper specificTypes().
I enabled the compiler-related tests in issue50417.go, added an extra
test for unnamed pointer types, and added a bunch more tests for
interesting cases involving StructuralType(). I added a test
issue50417b.go similar to the original example, but also tests access to
an embedded field.
I also added a unit test in
cmd/compile/internal/types/structuraltype_test.go that tests a bunch of
unusual cases directly (some of which have no structural type).
Updates #50417
Change-Id: I77c55cbad98a2b95efbd4a02a026c07dfbb46caa
Reviewed-on: https://go-review.googlesource.com/c/go/+/376194
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
When we export a shape instantiation, because a particular
fully-instantiated type is needed by an inlineable function, we possibly
export the body of the instantiation, if it is inlineable. In this case,
we should have been calling ImportedBody() to make sure that the
function body had already been read in (if it is actually imported from
another package).
Fixes#50598
Change-Id: I512d2bcc745faa6ff3a97e25bc8f46e2c2643d23
Reviewed-on: https://go-review.googlesource.com/c/go/+/378494
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
In order to make sure we export the dictionaries/shape methods for all
fully-instantiated types in inlineable functions, we need to descend
fully into types. For example, we may have a map type (e.g.
map[transactionID]Promise[*ByteBuffer]), where the key or value is a new
fully-instantiated type. So, I add a new checkFullyInst() traversal
function, which traverses all encountered types, but maintains a map, so
it only traverse it type once. We need to descend fully into interfaces,
structs, and methods, since a fully-instantiated type make occur in any
fields or arguments/results of methods, etc.
Fixes#50561
Change-Id: I88681a30384168539ed7229eed709f4e73ff0666
Reviewed-on: https://go-review.googlesource.com/c/go/+/378154
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The names given to methods of types created during type substitution
were possible incorrect when the type parameters themselves were nested
types.
Fixes#50485
Change-Id: I7e0043ed22c26406a5f9d8d51d9e928770a678f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/377494
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The loading of the base type in typ0() may cause s.Def to be defined for
the instantiated type, so load the base type before checking s.Def.
Fixes#50486
Change-Id: Ic039bc8f774dda534f4ccd1f920220b7a10dede6
Reviewed-on: https://go-review.googlesource.com/c/go/+/377094
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Issue #50552 is due to a problem with my recent improvement in the
interaction between generics and inlining. In markInlBody(), we now mark
dictionaries and shape methods for export, so they will be available for
any package that inlines the current inlineable function. But we need to
make sure that the dictionary and method symbols have actually been
resolved into Nodes (looked up in the import data), if they are not
already defined, so we can then mark them for export.
Improved header comment on Resolve().
Fixes#50552
Change-Id: I89e52d39d3b9894591d2ad6eb3a8ed3bb5f1e0a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/377714
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Added a test to make sure that the private methods of a local generic
type are properly exported, if there is a global variable with that
type.
Added comments in crawler.go, to give more detail and to give more about
the overall purpose.
Fixed one place where t.isFullyInstantiated() should be replaced by
isPtrFullyInstantiated(t), so that we catch pointers to generic types
that may be used as a method receiver.
Change-Id: I9c42d14eb6ebe14d249df7c8fa39e889f7cd3f22
Reviewed-on: https://go-review.googlesource.com/c/go/+/374754
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Finally figured out how to deal with the interaction between generics
and inlining. The problem has been: what to do if you inline a function
that uses a new instantiated type that hasn't been seen in the current
package? This might mean that you need to do another round of
function/method instantiatiations after inlining, which might lead to
more inlining, etc. (which is what we currently do, but it's not clear
when you can stop the inlining/instantiation loop).
We had thought that one solution was to export instantiated types (even
if not marked as exportable) if they are referenced in exported
inlineable functions. But that was quite complex and required changing
the export format. But I realized that we really only need to make sure
the relevant dictionaries and shape instantiations for the instantiated
types are exported, not the instantiated type itself and its wrappers.
The instantiated type is naturally created as needed, and the wrappers
are generated automatically while writing out run-time type (making use
of the exported dictionaries and shape instantiations).
So, we just have to make sure that those dictionaries and shape
instantiations are exported, and then they will be available without any
extra round of instantiations after inlining. We now do this in
crawler.go. This is especially needed when the instantiated type is only
put in an interface, so relevant dictionaries/shape instantiations are
not directly referenced and therefore exported, but are still needed for
the itab.
This fix avoids the phase ordering problem where we might have to keep
creating new type instantiations and instantiated methods after each
round of inlining we do.
Removed the extra round of instantiation/inlining that were added in the
previous fix. The existing tests
test/typeparam{geninline.go,structinit.go} already test this situation
of inlining a function referencing a new instantiated type.
Added the original example from issue 50121 as test (has 5 packages),
since it found a problem with this code that the current simpler test
for 50121 did not find.
Change-Id: Iac5d0dddf4be19376f6de36ee20a83f0d8f213b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/375494
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Similarly to what we do for the built-in function `copy`,
where we allow a string as 2nd argument to append, also
permit a type parameter constrained by string|[]byte.
While at it, change date in the manual.go2 test files so
that we don't need to constantly correct it when copying
a test case from that file into a proper test file.
Fixes#50281.
Change-Id: I23fed66736aa07bb3c481fe97313e828425ac448
Reviewed-on: https://go-review.googlesource.com/c/go/+/376214
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
types2 allows the conversion of a slice of a user-defined byte type B
(not builtin uint8 or byte) to string. But runtime.slicebytetostring
requires a []byte argument, so add in a CONVNOP from []B to []byte if
needed. Same for the conversion of a slice of user-defined rune types to
string.
I made the same change in the transformations of the old typechecker, so
as to keep tcConv() and transformConv() in sync. That fixes the bug for
-G=0 mode as well.
Fixes#23536
Change-Id: Ic79364427f27489187f3f8015bdfbf0769a70d69
Reviewed-on: https://go-review.googlesource.com/c/go/+/376056
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
CL 352870 added extra phase for instantiation after inlining, to take
care of the new fully-instantiated types. However, when fetching inlined
body of these types's methods, we need to allow OADDR operations on
untyped expressions, the same as what main inlining phase does.
The problem does not show up, until CL 371554, which made the compiler
do not re-typecheck while importing, thus leaving a OXDOT node to be
marked as address taken when it's not safe to do that.
Fixes#50437
Change-Id: I20076b872182c520075a4f8b84230f5bcb05b341
Reviewed-on: https://go-review.googlesource.com/c/go/+/375574
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
For #50317.
Change-Id: I24ccf333c380283a36b573ef8fc3e7fcd71bd17f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376215
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Trust: Dan Scales <danscales@google.com>
Work-around for #50481: report an error for multiple
blank type parameters. It's always possible to use
non-blank names in those cases.
We expect to lift this restriction for 1.19.
For #50481.
Change-Id: Ifdd2d91340aac1da3387f7d80d46e44f5997c2a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/376058
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Move switch to enable method type parameters entirely
to the parser, by adding the mode AllowMethodTypeParams.
Ensure that the error messages are consistent.
Remove unnecessary code in the type checker.
Fixes#50317.
Change-Id: I4f3958722400bdb919efa4c494b85cf62f4002bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/376054
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change implements field the access p.f where the type of p
is a type parameter with a structural constraint that is a struct
with a field f. This is only the fix for the type checker. The
compiler will need a separate CL.
This makes the behavior consistent with the fact that we can
write struct composite literals for type parameters with a
struct structural type.
For #50417.
For #50233.
Change-Id: I87d07e016f97cbf19c45cde19165eae3ec0bad2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/375795
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
In the dict info, we need to save the SelectorExpr of a generic method
call when making its sub-dictionary entry. The generic method call will
eventually be transformed into a function call on the method shape
instantiation, so we may not always have the selector info available
when we need it to create a dictionary. We use this SelectorExpr as
needed if the relevant call node has already been transformed.
Similarly, we save the InstExpr of generic function calls, since the
InstExpr will be dropped when the function call is transformed to a call
to a shape instantiation. We use this InstExpr if the relevant function
call has already been transformed.
Added an extra generic function Some2 and a call to it from Some that
exercises the generic function case. The existing test already tests the
method call case.
Fixes#50264
Change-Id: I2c7c7d79a8e33ca36a5e88e64e913c57500c97f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/373754
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Since we use existing instantiations from the symbol table when possible
(to make sure each instantiation is unique), we need to pop
instantiations of local types when leaving the containing scope.
g.stmts() now pushes and pops scope, and we do a Pushdcl() in g.typ0()
when creating an instantiation of a local type.
Non-instantiated local types (generic or not) are translated directly
from types2, so they don't need to be pushed/popped. We don't export
function bodies with local types, so there is no issue during import.
We still don't support local types in generic functions/methods.
Fixes#50177
Change-Id: If2d2fe71aec003d13f0338565c7a0da2c9580a14
Reviewed-on: https://go-review.googlesource.com/c/go/+/372654
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The imported code is already typechecked. NodAddrAt typechecks its
argument, which is unnecessary here and leads to errors when
typechecking unexported field references in other packages' code.
Mark the node is question as already typechecked, so we don't
retypecheck it.
Fixes#50148
Change-Id: I9789e3e7dd4d58ec095675e27b1c98389f7a0c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/371554
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Generic instantiations can produce conversions from constant
literal ints or floats to complex values. We could constant literals
during instantiation, but it is just as easy to upgrade the code
generator to do the conversions.
Fixes#50193
Change-Id: I24bdc09226c8e868f6282e0e4057ba6c3ad5c41a
Reviewed-on: https://go-review.googlesource.com/c/go/+/372514
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Thanks to the simpler test case for issue 50109. I'm keeping the old
test case in place, since it's not too complex, and may be useful for
testing other things as well.
Updates #50109
Change-Id: I80cdbd1da473d0cc4dcbd68e45bab7ddb6f9263e
Reviewed-on: https://go-review.googlesource.com/c/go/+/371515
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: roger peppe <rogpeppe@gmail.com>
We delay all transformations on generic functions, and only do them on
instantiated functions, for several reasons, of which one is that
otherwise the compiler won't understand the relationship between
constrained type parameters. In an instantiation with shape arguments,
the underlying relationship between the type arguments are clear and
don't lead to compiler errors.
This issue is because I missed delaying assignment transformations for
variable declarations. So, we were trying to transform an assignment,
and the compiler doesn't understand the relationship between the T and U
type parameters.
The fix is to delay assignment transformations for variable declarations
of generic functions, just as we do already for normal assignment
statements.
A work-around for this issue would be to just separate the assignment
from the variable declaration in the generic function (for this case of
an assignment involving both of the constrained type parameters).
Fixes#50147
Change-Id: Icdbcda147e5c4b386e4715811761cbe73d0d837e
Reviewed-on: https://go-review.googlesource.com/c/go/+/371534
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
We can import an shape-instantiated function/method for inlining
purposes. If we are instantiating the methods of a instantiated type
that we have seen, and it happens to need a shape instantiation that we
have imported, then don't re-create the instantiation, since we will end
up with conflicting/duplicate definitions for the instantiation symbol.
Instead, we can just use the existing imported instantation, and enter
it in the instInfoMap[].
Fixes#50121
Change-Id: I6eeb8786faad71106e261e113048b579afad04fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/371414
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In identical(), we don't want any to match a shape empty-interface type
for the identStrict option, since IdenticalStrict() is specifically not
supposed to match a shape type with a non-shape type.
There is similar code in (*Type).cmp() (TINTER case), but I don't
believe that we want to disqualify shape types from matching any in this
case, since cmp() is used for back-end code, where we don't care about
shape types vs non-shape types.
The issue mainly comes about when 'any' is used as a type argument
(rather than 'interface{}'), but only with some complicated
circumstances, as shown by the test case. (Couldn't reproduce with
simpler test cases.)
Fixes#50109
Change-Id: I3f2f88be158f9ad09273237e1d346bc56aac099f
Reviewed-on: https://go-review.googlesource.com/c/go/+/371154
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Augmented some of the typeswitch*.go tests so that some instantiations
have duplicate cases, in order to ensure we're testing that.
Spacing changes in the tests are due to gofmt.
Change-Id: I5d3678813505c520c544281d4ac8a62ce7e236ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/370155
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Deal with case where a certain instantiation of a generic
function/method leads to an unsatisfiable type assertion or type case.
In that case, the compiler was causing a fatal error while trying to
create an impossible itab for the dictionary. To deal with that case,
allow ITabLsym() to create a dummy itab even when the concrete type
doesn't implement the interface. This dummy itab is analogous to the
"negative" itabs created on-the-fly by the runtime.
We will use the dummy itab in type asserts and type switches in
instantiations that use that dictionary entry. Since the dummy itab can
never be used for any real value at runtime (since the concrete type
doesn't implement the interface), there will always be a failure for the
corresponding type assertion or a non-match for the corresponding
type-switch case.
Fixes#50002
Change-Id: I1df05b1019533e1fc93dd7ab29f331a74fab9202
Reviewed-on: https://go-review.googlesource.com/c/go/+/369894
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Make sure that we can import/export selects for generics.
Change-Id: Ibf36e98fc574ce9275820aa426b3e6703b0aae6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/369101
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When we set g.curDecl for the type params created during fillinMethods
for an instantiated type, we need to save/restore its value, because
fillinMethods() may be called while processing a typeDecl. We want the
value of g.curDecl to continue to be correct for type params created in
the typeDecl. Because of ordering issues, not restoring g.curDecl
happens to cause problems (which don't always show up visibly) exactly
when a type param is not actually used in a type declaration.
Cleared g.curDecl to "" at the later points in typeDecl() and
funcDecl(). This allows adding asserts that g.curDecl is always empty
("") when we set it in typeDecl() and funcDecl(), and always non-empty
when we use it in typ0().
Fixes#49893
Change-Id: Ic2fb1df791585bd257f2b86ffaae0453c31705c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/368454
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Currently, identical handles any and interface{} by checking against
Types[TINTER]. This is not always true, since when two generated
interface{} types may not use the same *Type instance.
Instead, we must check whether Type is empty interface or not.
Fixes#49875
Change-Id: I28fe4fc0100041a01bb03da795cfe8232b515fc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/367754
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In the case where we need to re-export a generic function/method from
another package in the export data of the current package, make sure it
is loaded before trying to write it out.
Fixed#49667
Change-Id: I177754bb762689f34cf5c8ad246d43f1cdbbf195
Reviewed-on: https://go-review.googlesource.com/c/go/+/365837
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It causes a crash because of the unexpected XDOT operation. It's not
needed, since we will run ComputeAddrTaken() on function instantiations
after stenciling. And it's not always correct, since we may not be able
to distinguish between a array and a slice, if a type is dependent on a
type param.
However, we do need to call ComputeAddrTaken on instantiations created
during inlining, since that is after the main ComputeAddrTaken pass.
Fixes#49659
Change-Id: I0bb610cf11f14e4aa9068f6ca2a012337b069c79
Reviewed-on: https://go-review.googlesource.com/c/go/+/365214
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
