There are several places where a new (internal) complex constant is allocated
via new(Mpcplx) rather than newMpcmplx(). The problem with using new() is that
the Mpcplx data structure's Real and Imag components don't get initialized with
an Mpflt of the correct precision (they have precision 0, which may be adjusted
later).
In all cases but one, the components of those complex constants are set using
a Set operation which "inherits" the correct precision from the value that is
being set.
But when creating a complex value for an imaginary literal, the imaginary
component is set via SetString which assumes 64bits of precision by default.
As a result, the internal representation of 0.01i and complex(0, 0.01) was
not correct.
Replaced all used of new(Mpcplx) with newMpcmplx() and added a new test.
Fixes#30243.
Change-Id: Ife7fd6ccd42bf887a55c6ce91727754657e6cb2d
Reviewed-on: https://go-review.googlesource.com/c/163000
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 154057 adds guards agaist out-of-bound reads from readonly
constants. It turns out that in dead code, the offset can also
be negative. Guard against negative offset as well.
Fixes#30257.
Change-Id: I47c2a2e434dd466c08ae6f50f213999a358c796e
Reviewed-on: https://go-review.googlesource.com/c/162819
Reviewed-by: Keith Randall <khr@golang.org>
Allow shifts by signed amounts. Panic if the shift amount is negative.
TODO: We end up doing two compares per shift, see Ian's comment
https://github.com/golang/go/issues/19113#issuecomment-443241799 that
we could do it with a single comparison in the normal case.
The prove pass mostly handles this code well. For instance, it removes the
<0 check for cases like this:
if s >= 0 { _ = x << s }
_ = x << len(a)
This case isn't handled well yet:
_ = x << (y & 0xf)
I'll do followon CLs for unhandled cases as needed.
Update #19113
R=go1.13
Change-Id: I839a5933d94b54ab04deb9dd5149f32c51c90fa1
Reviewed-on: https://go-review.googlesource.com/c/158719
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL introduces compiler support for the new binary and octal integer
literals, hexadecimal floats, and digit separators for all number literals.
The new Go 2 number literal scanner accepts the following liberal format:
number = [ prefix ] digits [ "." digits ] [ exponent ] [ "i" ] .
prefix = "0" [ "b" |"B" | "o" | "O" | "x" | "X" ] .
digits = { digit | "_" } .
exponent = ( "e" | "E" | "p" | "P" ) [ "+" | "-" ] digits .
If the number starts with "0x" or "0X", digit is any hexadecimal digit;
otherwise, digit is any decimal digit. If the accepted number is not valid,
errors are reported accordingly.
See the new test cases in scanner_test.go for a selection of valid and
invalid numbers and the respective error messages.
R=Go1.13
Updates #12711.
Updates #19308.
Updates #28493.
Updates #29008.
Change-Id: Ic8febc7bd4dc5186b16a8c8897691e81125cf0ca
Reviewed-on: https://go-review.googlesource.com/c/157677
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Make sure the argument to memmove is of pointer type before we try to
get the element type.
This has been noticed for code that uses unsafe+linkname so it can
call runtime.memmove. Probably not the best thing to allow, but the
code is out there and we'd rather not break it unnecessarily.
Fixes#30061
Change-Id: I334a8453f2e293959fd742044c43fbe93f0b3d31
Reviewed-on: https://go-review.googlesource.com/c/160826
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We are copying the results to uninitialized stack space. Write
barrier is not needed.
Fixes#30041.
Change-Id: Ia91d74dbafd96dc2bd92de0cb479808991dda03e
Reviewed-on: https://go-review.googlesource.com/c/160737
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Treat compiler-generated init functions as wrappers, so they will not
be shown in tracebacks.
The exception to this rule is that we'd like to show the line number
of initializers for global variables in tracebacks. In order to
preserve line numbers for those cases, separate out the code for those
initializers into a separate function (which is not marked as
autogenerated).
This CL makes the go binary 0.2% bigger.
Fixes#29919
Change-Id: I0f1fbfc03d10d764ce3a8ddb48fb387ca8453386
Reviewed-on: https://go-review.googlesource.com/c/159717
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Whether a truncation should become a MOVWreg or a MOVWZreg doesn't
depend on the type of the operand, it depends on the type of the final
result. If the final result is unsigned, we can use MOVWZreg. If the
final result is signed, we can use MOVWreg. Checking the type of the
operand does the wrong thing if truncating an unsigned value to a
signed value, or vice-versa.
Fixes#29943
Change-Id: Ia6fc7d006486fa02cffd0bec4d910bdd5b6365f8
Reviewed-on: https://go-review.googlesource.com/c/159760
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They can't be used, so we don't need code generated for them. We just
need to report errors in their bodies.
This is the minimal CL for 1.12. For 1.13, CL 158845 will remove
a bunch of special cases sprinkled about the compiler to handle "_"
functions, which should (after this CL) be unnecessary.
Update #29870
Change-Id: Iaa1c194bd0017dffdce86589fe2d36726ee83c13
Reviewed-on: https://go-review.googlesource.com/c/158820
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reuse the strict mechanism from FileLine for FuncForPC, so we don't
crash when asking the pcln table about bad pcs.
Fixes#29735
Change-Id: Iaffb32498b8586ecf4eae03823e8aecef841aa68
Reviewed-on: https://go-review.googlesource.com/c/157799
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Normally this happens when combining a sign extension and a load. We
want the resulting combo-instruction to get the line number of the
load, not the line number of the sign extension.
For each rule, compute where we should get its line number by finding
a value on the match side that can fault. Use that line number for
all the new values created on the right-hand side.
Fixes#27201
Change-Id: I19b3c6f468fff1a3c0bfbce2d6581828557064a3
Reviewed-on: https://go-review.googlesource.com/c/156937
Reviewed-by: David Chase <drchase@google.com>
Currently, obj.Ctxt's symbol table does not distinguish between ABI0
and ABIInternal symbols. This is *almost* okay, since a given symbol
name in the final object file is only going to belong to one ABI or
the other, but it requires that the compiler mark a Sym as being a
function symbol before it retrieves its LSym. If it retrieves the LSym
first, that LSym will be created as ABI0, and later marking the Sym as
a function symbol won't change the LSym's ABI.
Marking a Sym as a function symbol before looking up its LSym sounds
easy, except Syms have a dual purpose: they are used just as interned
strings (every function, variable, parameter, etc with the same
textual name shares a Sym), and *also* to store state for whatever
package global has that name. As a result, it's easy to slip up and
look up an LSym when a Sym is serving as the name of a local variable,
and then later mark it as a function when it's serving as the global
with the name.
In general, we were careful to avoid this, but #29610 demonstrates one
case where we messed up. Because of on-demand importing from indexed
export data, it's possible to compile a method wrapper for a type
imported from another package before importing an init function from
that package. If the argument of the method is named "init", the
"init" LSym will be created as a data symbol when compiling the
wrapper, before it gets marked as a function symbol.
To fix this, we separate obj.Ctxt's symbol tables for ABI0 and
ABIInternal symbols. This way, the compiler will simply get a
different LSym once the Sym takes on its package-global meaning as a
function.
This fixes the above ordering issue, and means we no longer need to go
out of our way to create the "init" function early and mark it as a
function symbol.
Fixes#29610.
Updates #27539.
Change-Id: Id9458b40017893d46ef9e4a3f9b47fc49e1ce8df
Reviewed-on: https://go-review.googlesource.com/c/157017
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The compiler appears to contain several squirrelly corner
cases where nodes are double walked, some where new nodes
are created from walked parts. Rather than trust that we
had searched hard enough for the last one, change
exprSwitch.walk() to return immediately if it has already
been walked. This appears to be the only case where
double-walking a node is actually harmful.
Fixes#29562.
Change-Id: I0667e8769aba4c3236666cd836a934e256c0bfc5
Reviewed-on: https://go-review.googlesource.com/c/156317
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
As a followon to CL 152537, modify the panic-printing traceback
to also handle mid-stack inlining correctly.
Also declare -fm functions (aka method functions) as wrappers, so that
they get elided during traceback. This fixes part 2 of #26839.
Fixes#28640Fixes#24488
Update #26839
Change-Id: I1c535a9b87a9a1ea699621be1e6526877b696c21
Reviewed-on: https://go-review.googlesource.com/c/153477
Reviewed-by: David Chase <drchase@google.com>
Use the length of the bitmap to decide how much to pass to the
write barrier, not the total length of the arguments.
The test needs enough arguments so that two distinct bitmaps
get interpreted as a single longer bitmap.
Update #29362
Change-Id: I78f3f7f9ec89c2ad4678f0c52d3d3def9cac8e72
Reviewed-on: https://go-review.googlesource.com/c/156123
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
CL 155917 added a -race test that shouldn't be run when cgo is not
enabled. Enforce this in the test file, with a buildflag.
Fixes the nocgo builder.
Change-Id: I9fe0d8f21da4d6e2de3f8fe9395e1fa7e9664b02
Reviewed-on: https://go-review.googlesource.com/c/155957
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reorg map flags a bit so we don't need any extra space for the extra flag.
Fixes#23734
Change-Id: I436812156240ae90de53d0943fe1aabf3ea37417
Reviewed-on: https://go-review.googlesource.com/c/155918
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We can't remove race instrumentation unless there are no calls,
not just no static calls. Closure and interface calls also count.
The problem in issue 29329 is that there was a racefuncenter, an
InterCall, and a racefuncexit. The racefuncenter was removed, then
the InterCall was rewritten to a StaticCall. That prevented the
racefuncexit from being removed. That caused an imbalance in
racefuncenter/racefuncexit calls, which made the race detector barf.
Bug introduced at CL 121235
Fixes#29329
Change-Id: I2c94ac6cf918dd910b74b2a0de5dc2480d236f16
Reviewed-on: https://go-review.googlesource.com/c/155917
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Work involved in getting a stack trace is divided between
runtime.Callers and runtime.CallersFrames.
Before this CL, runtime.Callers returns a pc per runtime frame.
runtime.CallersFrames is responsible for expanding a runtime frame
into potentially multiple user frames.
After this CL, runtime.Callers returns a pc per user frame.
runtime.CallersFrames just maps those to user frame info.
Entries in the result of runtime.Callers are now pcs
of the calls (or of the inline marks), not of the instruction
just after the call.
Fixes#29007Fixes#28640
Update #26320
Change-Id: I1c9567596ff73dc73271311005097a9188c3406f
Reviewed-on: https://go-review.googlesource.com/c/152537
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
(SGTconst [c] (SRLconst _ [d])) && 0 <= int32(c) && uint32(d) <= 31 && 1<<(32-uint32(d)) <= int32(c) -> (MOVWconst [1])
This rule is problematic. 1<<(32-uint32(d)) <= int32(c) meant to
say that it is true if c is greater than the largest possible
value of the right shift. But when d==1, 1<<(32-1) is negative
and results in the wrong comparison.
Rewrite the rules in a more direct way.
Fixes#29402.
Change-Id: I5940fc9538d9bc3a4bcae8aa34672867540dc60e
Reviewed-on: https://go-review.googlesource.com/c/155798
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Method expressions where the method is implicitly declared have no
line number. The Error method of the built-in error type is one such
method. We leave the line number at the use of the method expression
in this case.
Fixes#29389
Change-Id: I29c64bb47b1a704576abf086599eb5af7b78df53
Reviewed-on: https://go-review.googlesource.com/c/155639
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It was possible that
var X interface{} = 'x'
could cause a compilation failure due to having not calculated rune's
width yet. typecheck.go normally calculates the width of things, but
it doesn't for implicit conversions to default type. We already
compute the width of all of the standard numeric types in universe.go,
but we failed to calculate it for the rune alias type. So we could
later crash if the code never otherwise explicitly mentioned 'rune'.
While here, explicitly compute widths for 'byte' and 'error' for
consistency.
Fixes#29350.
Change-Id: Ifedd4899527c983ee5258dcf75aaf635b6f812f8
Reviewed-on: https://go-review.googlesource.com/c/155380
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Out-of-bounds reads of globals can happen in dead code. For code
like this:
s := "a"
if len(s) == 3 {
load s[0], s[1], and s[2]
}
The out-of-bounds loads are dead code, but aren't removed yet
when lowering. We need to not panic when compile-time evaluating
those loads. This can only happen for dead code, so the result
doesn't matter.
Fixes#29215
Change-Id: I7fb765766328b9524c6f2a1e6ab8d8edd9875097
Reviewed-on: https://go-review.googlesource.com/c/154057
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
The formatting routines for types use a depth limit as primitive
mechanism to detect cycles. For now, increase the limit from 100
to 250 and file #29312 so we don't drop this on the floor.
Also, adjust some fatal error messages elsewhere to use
better formatting.
Fixes#29264.
Updates #29312.
Change-Id: Idd529f6682d478e0dcd2d469cb802192190602f6
Reviewed-on: https://go-review.googlesource.com/c/154583
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When a println arg contains a call to an inlineable function
that itself contains a switch, that switch statement will be
walked twice, once by the walkexprlist formerly in the
OPRINT/OPRINTN case, then by walkexprlistcheap in walkprint.
Remove the first walkexprlist, it is not necessary.
walkexprlist =
s[i] = walkexpr(s[i], init)
walkexprlistcheap = {
s[i] = cheapexpr(n, init)
s[i] = walkexpr(s[i], init)
}
Seems like this might be possible in other places, i.e.,
calls to inlineable switch-containing functions.
See also #25776.
Fixes#29220.
Change-Id: I3781e86aad6688711597b8bee9bc7ebd3af93601
Reviewed-on: https://go-review.googlesource.com/c/154497
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
A prior optimization (https://golang.org/cl/106175) removed the
generation of unnecessary method expression wrappers, but also
eliminated the generation of the wrapper for error.Error which
was still required.
Special-case error type in the optimization.
Fixes#29304.
Change-Id: I54c8afc88a2c6d1906afa2d09c68a0a3f3e2f1e3
Reviewed-on: https://go-review.googlesource.com/c/154578
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead of testing len(slice)+numNewElements > cap(slice) use
uint(len(slice)+numNewElements) > uint(cap(slice)) to test
if a slice needs to be grown in an append operation.
This prevents a possible overflow when len(slice) is near the maximum
int value and the addition of a constant number of new elements
makes it overflow and wrap around to a negative number which is
smaller than the capacity of the slice.
Appending a slice to a slice with append(s1, s2...) already used
a uint comparison to test slice capacity and therefore was not
vulnerable to the same overflow issue.
Fixes: #29190
Change-Id: I41733895838b4f80a44f827bf900ce931d8be5ca
Reviewed-on: https://go-review.googlesource.com/c/154037
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
By combining the load+op, we may force the op to happen earlier in
the store chain. That might force the SymAddr operation earlier, and
in particular earlier than its corresponding VarDef. That leads to
an invalid schedule, so avoid that.
This is kind of a hack to work around the issue presented. I think
the underlying problem, that LEAQ is not directly ordered with respect
to its vardef, is the real problem. The benefit of this CL is that
it fixes the immediate issue, is small, and obviously won't break
anything. A real fix for this issue is much more invasive.
The go binary is unchanged in size.
This situation just doesn't occur very often.
Fixes#28445
Change-Id: I13a765e13f075d5b6808a355ef3c43cdd7cd47b6
Reviewed-on: https://go-review.googlesource.com/c/153641
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
IsSliceInBounds(x, y) asserts that y is not negative, but
there were cases where this is not true. Change code
generation to ensure that this is true when it's not obviously
true. Prove phase cleans a few of these out.
With this change the compiler text section is 0.06% larger,
that is, not very much. Benchmarking still TBD, may need
to wait for access to a benchmarking box (next week).
Also corrected run.go to handle '?' in -update_errors output.
Fixes#28797.
Change-Id: Ia8af90bc50a91ae6e934ef973def8d3f398fac7b
Reviewed-on: https://go-review.googlesource.com/c/152477
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, when a function signature had defined a non-final variadic
parameter, the error message always referred to the type associated with that
parameter. However, if the offending parameter's name was part of an identifier
list with a variadic type, one could misinterpret the message, thinking the
problem had been with one of the other names in the identifer list.
func bar(a, b ...int) {}
clear ~~~~~~~^ ^~~~~~~~ confusing
This change updates the error message and sets the column position to that of
the offending parameter's name, if it exists.
Fixes#28450.
Change-Id: I076f560925598ed90e218c25d70f9449ffd9b3ea
Reviewed-on: https://go-review.googlesource.com/c/152417
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
staticcopy of a struct or array should recursively call itself, not
staticassign.
This fixes an issue where a struct with a slice in it is copied during
static initialization. In this case, the backing array for the slice
is duplicated, and each copy of the slice refers to a different
backing array, which is incorrect. That issue has existed since at
least Go 1.2.
I'm not sure why this was never noticed. It seems like a pretty
obvious bug if anyone modifies the resulting slice.
In any case, we started to notice when the optimization in CL 140301
landed. Here is basically what happens in issue29013b.go:
1) The error above happens, so we get two backing stores for what
should be the same slice.
2) The code for initializing those backing stores is reused.
But not duplicated: they are the same Node structure.
3) The order pass allocates temporaries for the map operations.
For the first instance, things work fine and two temporaries are
allocated and stored in the OKEY nodes. For the second instance,
the order pass decides new temporaries aren't needed, because
the OKEY nodes already have temporaries in them.
But the order pass also puts a VARKILL of the temporaries between
the two instance initializations.
4) In this state, the code is technically incorrect. But before
CL 140301 it happens to work because the temporaries are still
correctly initialized when they are used for the second time. But then...
5) The new CL 140301 sees the VARKILLs and decides to reuse the
temporary for instance 1 map 2 to initialize the instance 2 map 1
map. Because the keys aren't re-initialized, instance 2 map 1
gets the wrong key inserted into it.
Fixes#29013
Change-Id: I840ce1b297d119caa706acd90e1517a5e47e9848
Reviewed-on: https://go-review.googlesource.com/c/152081
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
A Go user made a well-documented request for a slightly
lower threshold. I tested against a selection of other
people's benchmarks, and saw a tiny benefit (possibly noise)
at equally tiny cost, and no unpleasant surprises observed
in benchmarking.
I.e., might help, doesn't hurt, low risk, request was
delivered on a silver platter.
It did, however, change the behavior of one test because
now bytes.Buffer.Grow is eligible for inlining.
Updates #19348.
Change-Id: I85e3088a4911290872b8c6bda9601b5354c48695
Reviewed-on: https://go-review.googlesource.com/c/151977
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
While here, rename nonnegintconst to indexconst (because that's
what it is) and add Fatalf calls where we are not expecting the
indexconst call to fail, and fixed wrong comparison in smallintconst.
Fixes#23781.
Change-Id: I86eb13081c450943b1806dfe3ae368872f76639a
Reviewed-on: https://go-review.googlesource.com/c/151599
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Don't convert values that aren't Go constants, like
uintptr(unsafe.Pointer(nil)), to a literal constant. This avoids
assuming they are constants for things like indexing, array sizes,
case duplication, etc.
Also, nil is an allowed duplicate in switches. CTNILs aren't Go constants.
Fixes#28078Fixes#28079
Change-Id: I9ab8af47098651ea09ef10481787eae2ae2fb445
Reviewed-on: https://go-review.googlesource.com/c/151320
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When a slice composite literal is sparse, initialize it dynamically
instead of statically.
s := []int{5:5, 20:20}
To initialize the backing store for s, use 2 constant writes instead
of copying from a static array with 21 entries.
This CL also fixes pathologies in the compiler when the slice is
*very* sparse.
Fixes#23780
Change-Id: Iae95c6e6f6a0e2994675cbc750d7a4dd6436b13b
Reviewed-on: https://go-review.googlesource.com/c/151319
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Abort evconst if its argument isn't a Go constant. The SSA backend
will do the optimizations in question later. They tend to be weird
cases, like uintptr(unsafe.Pointer(uintptr(1))).
Fix OADDSTR and OCOMPLEX cases in isGoConst.
OADDSTR has its arguments in n.List, not n.Left and n.Right.
OCOMPLEX might have a 2-result function as its arg in List[0]
(in which case it isn't a Go constant).
Fixes#24760
Change-Id: Iab312d994240d99b3f69bfb33a443607e872b01d
Reviewed-on: https://go-review.googlesource.com/c/151338
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In assembly free packages (aka "complete" or "pure go"), allow
bodyless functions if they are linkname'd to something else.
Presumably the thing the function is linkname'd to has a definition.
If not, the linker will complain. And linkname is unsafe, so we expect
users to know what they are doing.
Note this handles only one direction, where the linkname directive
is in the local package. If the linkname directive is in the remote
package, this CL won't help. (See os/signal/sig.s for an example.)
Fixes#23311
Change-Id: I824361b4b582ee05976d94812e5b0e8b0f7a18a6
Reviewed-on: https://go-review.googlesource.com/c/151318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This commit allows the runtime to handle 64bits addresses returned by
mmap syscall on AIX.
Mmap syscall returns addresses on 59bits on AIX. But the Arena
implementation only allows addresses with less than 48 bits.
This commit increases the arena size up to 1<<60 for aix/ppc64.
Update: #25893
Change-Id: Iea72e8a944d10d4f00be915785e33ae82dd6329e
Reviewed-on: https://go-review.googlesource.com/c/138736
Reviewed-by: Austin Clements <austin@google.com>
When using soft-float, OMUL might be rewritten to function call
so we should ensure it was evaluated first.
Fixes#28688
Change-Id: I30b87501782fff62d35151f394a1c22b0d490c6c
Reviewed-on: https://go-review.googlesource.com/c/148837
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Because run.go doesn't pass the package being compiled to the compiler
via the -p flag, it can't match up the main·f symbol from the
assembler with the "func f" stub in Go, so it doesn't produce the
correct assembly stub.
Fix this by removing the package prefix from the assembly definition.
Alternatively, we could make run.go pass -p to the compiler, but it's
nicer to remove these package prefixes anyway.
Should fix the linux-arm builder, which was broken by the introduction
of function ABIs in CL 147160.
Updates #27539.
Change-Id: Id62b7701e1108a21a5ad48ffdb5dad4356c273a6
Reviewed-on: https://go-review.googlesource.com/c/149483
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
When we set an explicit argmap, we may want only a prefix of that
argmap. Argmap is set when the function is reflect.makeFuncStub or
reflect.methodValueCall. In this case, arglen specifies how much of
the args section is actually live. (It could be either all the args +
results, or just the args.)
Fixes#28750
Change-Id: Idf060607f15a298ac591016994e58e22f7f92d83
Reviewed-on: https://go-review.googlesource.com/c/149217
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
We have an existing optimization that recognizes
memory moves of the form A -> B -> C and converts
them into A -> C, in the hopes that the store to
B will be end up being dead and thus eliminated.
However, when A, B, and C are large types,
the front end sometimes emits VarDef ops for the moves.
This change adds an optimization to match that pattern.
This required changing an old compiler test.
The test assumed that a temporary was required
to deal with a large return value.
With this optimization in place, that temporary
ended up being eliminated.
Triggers 649 times during 'go build -a std cmd'.
Cuts 16k off cmd/go.
name old object-bytes new object-bytes delta
Template 507kB ± 0% 507kB ± 0% -0.15% (p=0.008 n=5+5)
Unicode 225kB ± 0% 225kB ± 0% ~ (all equal)
GoTypes 1.85MB ± 0% 1.85MB ± 0% ~ (all equal)
Flate 328kB ± 0% 328kB ± 0% ~ (all equal)
GoParser 402kB ± 0% 402kB ± 0% -0.00% (p=0.008 n=5+5)
Reflect 1.41MB ± 0% 1.41MB ± 0% -0.20% (p=0.008 n=5+5)
Tar 458kB ± 0% 458kB ± 0% ~ (all equal)
XML 601kB ± 0% 599kB ± 0% -0.21% (p=0.008 n=5+5)
Change-Id: I9b5f25c8663a0b772ad1ee51fa61f74b74d26dd3
Reviewed-on: https://go-review.googlesource.com/c/143479
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
This is a simple tweak to allow a bit more mid-stack inlining.
In cases like this:
func f() {
g()
}
We'd really like to inline f into its callers. It can't hurt.
We implement this optimization by making calls a bit cheaper, enough
to afford a single call in the function body, but not 2.
The remaining budget allows for some argument modification, or perhaps
a wrapping conditional:
func f(x int) {
g(x, 0)
}
func f(x int) {
if x > 0 {
g()
}
}
Update #19348
Change-Id: Ifb1ea0dd1db216c3fd5c453c31c3355561fe406f
Reviewed-on: https://go-review.googlesource.com/c/147361
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
Dead-code eliminating labels is tricky because there might
be gotos that can still reach them.
Bug probably introduced with CL 91056
Fixes#28616
Change-Id: I6680465134e3486dcb658896f5172606cc51b104
Reviewed-on: https://go-review.googlesource.com/c/147817
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Iskander Sharipov <iskander.sharipov@intel.com>
This change re-introduces (temporarily) a work-around for recursive
alias type declarations, originally in https://golang.org/cl/35831/
(intended as fix for #18640). The work-around was removed later
for a more comprehensive cycle detection check. That check
contained a subtle error which made the code appear to work,
while in fact creating incorrect types internally. See #25838
for details.
By re-introducing the original work-around, we eliminate problems
with many simple recursive type declarations involving aliases;
specifically cases such as #27232 and #27267. However, the more
general problem remains.
This CL also fixes the subtle error (incorrect variable use when
analyzing a type cycle) mentioned above and now issues a fatal
error with a reference to the relevant issue (rather than crashing
later during the compilation). While not great, this is better
than the current status. The long-term solution will need to
address these cycles (see #25838).
As a consequence, several old test cases are not accepted anymore
by the compiler since they happened to work accidentally only.
This CL disables parts or all code of those test cases. The issues
are: #18640, #23823, and #24939.
One of the new test cases (fixedbugs/issue27232.go) exposed a
go/types issue. The test case is excluded from the go/types test
suite and an issue was filed (#28576).
Updates #18640.
Updates #23823.
Updates #24939.
Updates #25838.
Updates #28576.
Fixes#27232.
Fixes#27267.
Change-Id: I6c2d10da98bfc6f4f445c755fcaab17fc7b214c5
Reviewed-on: https://go-review.googlesource.com/c/147286
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This reverts commit 9ce87a63b9.
The fix addresses the specific test case, but not the general
problem.
Updates #24755.
Change-Id: I0ba8463b41b099b1ebf49759f88a423b40f70d58
Reviewed-on: https://go-review.googlesource.com/c/145617
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
