This CL add test cases for the unary FP negative
operation.
Change-Id: I54e7292ca9df05da0c2b113adefc97ee1e94c6e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/190937
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL performs the branchelim optimization on WASM with its
select instruction. And the total size of pkg/js_wasm decreased
about 80KB by this optimization.
Change-Id: I868eb146120a1cac5c4609c8e9ddb07e4da8a1d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/190957
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Because the Node AST represents references to declared objects (e.g.,
variables, packages, types, constants) by directly pointing to the
referred object, we don't have use-position info for these objects.
For switch statements with duplicate cases, we report back where the
first duplicate value appeared. However, due to the AST
representation, if the value was a declared constant, we mistakenly
reported the constant declaration position as the previous case
position.
This CL reports back against the 'case' keyword's position instead, if
there's no more precise information available to us.
It also refactors code to emit the same "previous at" error message
for duplicate values in map literals.
Thanks to Emmanuel Odeke for the test case.
Fixes#33460.
Change-Id: Iec69542ccd4aad594dde8df02d1b880a422c5622
Reviewed-on: https://go-review.googlesource.com/c/go/+/188901
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The assembly output for x & c == c, where c is power of 2:
MOVQ "".set+8(SP), AX
ANDQ $8, AX
CMPQ AX, $8
SETEQ "".~r2+24(SP)
With optimization using bitset:
MOVQ "".set+8(SP), AX
BTL $3, AX
SETCS "".~r2+24(SP)
output less than 1 instruction.
However, there is no speed improvement:
name old time/op new time/op delta
AllBitSet-8 0.35ns ± 0% 0.35ns ± 0% ~ (all equal)
Fixes#31904
Change-Id: I5dca4e410bf45716ed2145e3473979ec997e35d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/175957
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Array accesses with index types smaller than the machine word size may
involve a sign or zero extension of the index value before bounds
checking. Currently, this defeats prove because the facts about the
original index value don't flow through the sign/zero extension.
This CL fixes this by looking back through value-preserving sign/zero
extensions when adding facts via Update and, where appropriate, applying
the same facts using the pre-extension value. This fix is enhanced by
also looking back through value-preserving extensions within
ft.isNonNegative to infer whether the extended value is known to be
non-negative. Without this additional isNonNegative enhancement, this
logic is rendered significantly less effective by the limitation
discussed in the next paragraph.
In Update, the application of facts to pre-extension values is limited
to cases where the domain of the new fact is consistent with the type of
the pre-extension value. There may be cases where this cross-domain
passing of facts is valid, but distinguishing them from the invalid
cases is difficult for me to reason about and to implement.
Assessing which cases to allow requires details about the context and
inferences behind the fact being applied which are not available
within Update. Additional difficulty arises from the fact that the SSA
does not curently differentiate extensions added by the compiler for
indexing operations, extensions added by the compiler for implicit
conversions, or explicit extensions from the source.
Examples of some cases that would need to be filtered correctly for
cross-domain facts:
(1) A uint8 is zero-extended to int for indexing (a value-preserving
zeroExt). When, if ever, can signed domain facts learned about the int be
applied to the uint8?
(2) An int8 is sign-extended to int16 (value-preserving) for an equality
comparison. Equality comparison facts are currently always learned in both
the signed and unsigned domains. When, if ever, can the unsigned facts
learned about the int16, from the int16 != int16 comparison, be applied
to the original int8?
This is an alternative to CL 122695 and CL 174309. Compared to CL 122695,
this CL differs in that the facts added about the pre-extension value will
pass through the Update method, where additional inferences are processed
(e.g. fence-post implications, see #29964). CL 174309 is limited to bounds
checks, so is narrower in application, and makes the code harder to read.
Fixes#26292.
Fixes#29964.
Fixes#15074
Removes 238 bounds checks from std/cmd.
Change-Id: I1f87c32ee672bfb8be397b27eab7a4c2f304893f
Reviewed-on: https://go-review.googlesource.com/c/go/+/174704
Run-TryBot: Zach Jones <zachj1@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Don't skip closing parentheses of any kind after a missing
expression. They are likely part of the lexical construct
enclosing the expression.
Fixes#33386.
Change-Id: Ic0abc2037ec339a345ec357ccc724b7ad2a64c00
Reviewed-on: https://go-review.googlesource.com/c/go/+/188502
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Quietly drop duplicate methods inherited from embedded interfaces if
they have an identical signature to existing methods.
Updates #6977.
Change-Id: I144151cb7d99695f12b555c0db56207993c56284
Reviewed-on: https://go-review.googlesource.com/c/go/+/187519
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Quietly drop duplicate methods from embedded interfaces
if they have an identical signature to existing methods.
Instead of adjusting the prior syntax-based only method set
computation where methods don't have signature information
(and thus where de-duplication according to the new rules
would have been somewhat tricky to get right), this change
completely rewrites interface method set computation, taking
a page from the cmd/compiler's implementation. In a first
pass, when type-checking interfaces, explicit methods and
embedded interfaces are collected, but the interfaces are
not "expanded", that is the final method set computation
is done lazily, either when needed for method lookup, or
at the end of type-checking.
While this is a substantial rewrite, it allows us to get
rid of the separate (duplicate and delicate) syntactical
method set computation and generally simplifies checking
of interface types significantly. A few (esoteric) test
cases now have slightly different error messages but all
tests that are accepted by cmd/compile are also accepted
by go/types.
(This is a replacement for golang.org/cl/190258.)
Updates #6977.
Change-Id: Ic8b9321374ab4f617498d97c12871b69d1119735
Reviewed-on: https://go-review.googlesource.com/c/go/+/191257
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
There is real (albeit generated) code that exceeds the limit.
Fixes#33555
Change-Id: I668e85825d3d2a471970e869abe63f3492213cc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/189697
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The compiler can crash if the compiled code tries to
unconditionally read from a nil pointer. This should cause
the generated binary to panic, not the compiler.
Fixes#33438
Change-Id: Ic8fa89646d6968e2cc4e27da0ad9286662f8bc49
Reviewed-on: https://go-review.googlesource.com/c/go/+/188760
Reviewed-by: Austin Clements <austin@google.com>
We shouldn't mask to desired registers if we haven't masked out all the
forbidden registers yet. In this path we haven't masked out the nospill
registers yet. If the resulting mask contains only nospill registers, then
allocReg fails.
This can only happen on resultNotInArgs-marked instructions, which exist
only on the ARM64, MIPS, MIPS64, and PPC64 ports.
Maybe there's a better way to handle resultNotInArgs instructions.
But for 1.13, this is a low-risk fix.
Fixes#33355
Change-Id: I1082f78f798d1371bde65c58cc265540480e4fa4
Reviewed-on: https://go-review.googlesource.com/c/go/+/188178
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Gccgo generates incorrect type equality functions for some types.
CL 185817 fixes it. This CL adds a test.
Updates #33062.
Change-Id: Id445c5d44a437512c65c46a029e49b7fc32e4d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/185818
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #33013
Change-Id: I3db062b37860bb0c6c99a553408b47cf0313531e
Reviewed-on: https://go-review.googlesource.com/c/go/+/185517
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Gccgo CL 184998 added optimizations for one- and two-case select
statements. But it didn't handle break statement in the select
case correctly. The fix is CL 185519. This CL adds a test.
Change-Id: Ide1b199f106172b41dd77c1f6e0d662fccdd8cc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/185520
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For OLSH/ORSH, the right node is not a uintptr-typed. However,
unsafeValue still be called recursively for it, causing the
compiler crashes.
To fixing, the right node only needs to be evaluated
for side-effects, so just discard its value.
Fixes#32959
Change-Id: I34d5aa0823a0545f6dad1ec34774235ecf11addc
Reviewed-on: https://go-review.googlesource.com/c/go/+/185039
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Test case that causes incorrect compiler error from gccgo.
Updates #32922
Change-Id: I59432a8e8770cf03eda293f6d110c081c18fa88b
Reviewed-on: https://go-review.googlesource.com/c/go/+/184918
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL adds a test for gccgo bug #32901: not all the type
descriptors are registered and thus deduplicated with types
created by reflection. It needs a few levels of indirect imports
to trigger this bug.
Updates #32901.
Change-Id: Idbd89bedd63fea746769f2687f3f31c9767e5ec0
Reviewed-on: https://go-review.googlesource.com/c/go/+/184718
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Test case that caused a compiler crash in gofrontend, related to
exporting inlinable function bodies.
Updates #32778
Change-Id: Iacf1753825d5359da43e5e281189876d4c3dd3c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/183851
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It ends up making two similar types, [N]uint8 of both
alg and noalg varieties. Comparsions between the two then
don't come out equal when they should.
In particular, the type *[N]uint8 has an Elem pointer which
must point to one of the above two types; it can't point to both.
Thus allocating a *[N]uint8 and dereferencing it might be a
different type than a [N]uint8.
The fix is easy. Making a small test for this is really hard. It
requires that both a argless defer and the test be imported by a
common parent package. This is why a main binary doesn't see this
issue, but a test does (as Agniva noticed), because there's a wrapper
package that imports both the test and the defer.
Types like [N]uint8 don't really need to be marked noalg anyway,
as the generated code (if any) will be shared among all
vanilla memory types of the same size.
Fixes#32595
Change-Id: If7b77fa6ed56cd4495601c3f90170682d853b82f
Reviewed-on: https://go-review.googlesource.com/c/go/+/182357
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Adjusting gofrontend error messages for GCC standards causes the
messages expected by this test to be adjusted slightly: the gofrontend
code now quotes the _ identifier.
Change-Id: I55ee2ae70b4da3bf7a421ceea80b254dd17601a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/183477
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
A missing operand to mergePoint caused lower to place values
in the wrong blocks.
Includes test, belt+suspenders to do both ssa check and verify
the output (was is how the bug was originally observed).
The fixed bug here is very likely present in Go versions
1.9-1.12 on amd64 and s390x
Fixes#32680.
Change-Id: I63e702c4c40602cb795ef71b1691eb704d38ccc7
Reviewed-on: https://go-review.googlesource.com/c/go/+/183059
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For int8, int16, and int32, comparing their unsigned value to MaxInt64
to determine non-negativity doesn't make sense, because they have
negative values whose unsigned representation is smaller than that.
Fix is simply to compare with the appropriate upper bound based on the
value type's size.
Fixes#32560.
Change-Id: Ie7afad7a56af92bd890ba5ff33c86d1df06cfd9a
Reviewed-on: https://go-review.googlesource.com/c/go/+/181797
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts CL 180761
Reason for revert: Reinstate the stack-allocated defer CL.
There was nothing wrong with the CL proper, but stack allocation of defers exposed two other issues.
Issue #32477: Fix has been submitted as CL 181258.
Issue #32498: Possible fix is CL 181377 (not submitted yet).
Change-Id: I32b3365d5026600069291b068bbba6cb15295eb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/181378
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The logic for detecting deferreturn calls is wrong.
We used to look for a relocation whose symbol is runtime.deferreturn
and has an offset of 0. But on some architectures, the relocation
offset is not zero. These include arm (the offset is 0xebfffffe) and
s390x (the offset is 6).
This ends up setting the deferreturn offset at 0, so we end up using
the entry point live map instead of the deferreturn live map in a
frame which defers and then segfaults.
Instead, use the IsDirectCall helper to find calls.
Fixes#32477
Update #6980
Change-Id: Iecb530a7cf6eabd7233be7d0731ffa78873f3a54
Reviewed-on: https://go-review.googlesource.com/c/go/+/181258
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Shrinks the size of things that can be stack allocated from
10M to 128k for declared variables and from 64k to 16k for
implicit allocations (new(T), &T{}, etc).
Usage: "go build -gcflags -smallframes hello.go"
An earlier GOEXPERIMENT version of this caused only one
problem, when a gc-should-detect-oversize-stack test no
longer had an oversized stack to detect. The change was
converted to a flag to make it easier to access (for
diagnosing "long" GC-related single-thread pauses) and to
remove interference with the test.
Includes test to verify behavior.
Updates #27732.
Change-Id: I1255d484331e77185e07c78389a8b594041204c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/180817
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit fff4f599fe.
Reason for revert: Seems to still have issues around GC.
Fixes#32452
Change-Id: Ibe7af629f9ad6a3d5312acd7b066123f484da7f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/180761
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
When a defer is executed at most once in a function body,
we can allocate the defer record for it on the stack instead
of on the heap.
This should make defers like this (which are very common) faster.
This optimization applies to 363 out of the 370 static defer sites
in the cmd/go binary.
name old time/op new time/op delta
Defer-4 52.2ns ± 5% 36.2ns ± 3% -30.70% (p=0.000 n=10+10)
Fixes#6980
Update #14939
Change-Id: I697109dd7aeef9e97a9eeba2ef65ff53d3ee1004
Reviewed-on: https://go-review.googlesource.com/c/go/+/171758
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Normally, reflect.makeFuncStub records the context value at a known
point in the stack frame, so that the runtime can get the argument map
for reflect.makeFuncStub from that known location.
This doesn't work for defers or goroutines that haven't started yet,
because they haven't allocated a frame or run an instruction yet. The
argument map must be extracted from the context value. We already do
this for defers (the non-nil ctxt arg to getArgInfo), we just need to
do it for unstarted goroutines as well.
When we traceback a goroutine, remember the context value from
g.sched. Use it for the first frame we find.
(We never need it for deeper frames, because we normally don't stop at
the start of reflect.makeFuncStub, as it is nosplit. With this CL we
could allow makeFuncStub to no longer be nosplit.)
Fixes#25897
Change-Id: I427abf332a741a80728cdc0b8412aa8f37e7c418
Reviewed-on: https://go-review.googlesource.com/c/go/+/180258
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We need to make sure that there's no possible faulting
instruction between a VarDef and that variable being
fully initialized. If there was, then anything scanning
the stack during the handling of that fault will see
a live but uninitialized variable on the stack.
If we have:
NilCheck p
VarDef x
x = *p
We can't rewrite that to
VarDef x
NilCheck p
x = *p
Particularly, even though *p faults on p==nil, we still
have to do the explicit nil check before the VarDef.
Fixes#32288
Change-Id: Ib8b88e6a5af3bf6f238ff5491ac86f53f3cf9fc9
Reviewed-on: https://go-review.googlesource.com/c/go/+/179239
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
The gccgo compiler crashes with int-to-string conversion with
large integer constant operand. CL 179777 is the fix. This CL
adds a test.
Updates #32347.
Change-Id: Id1d9dbbcdd3addca4636f1b9c5fdbc450cc48c1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/179797
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL rewrites cmd/compile's package-level initialization ordering
algorithm to be compliant with the Go spec. See documentation in
initorder.go for details.
Incidentally, this CL also improves fidelity of initialization loop
diagnostics by including referenced functions in the emitted output
like go/types does.
Fixes#22326.
Change-Id: I7c9ac47ff563df4d4f700cf6195387a0f372cc7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/170062
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The code in #29218 resulted in an If block containing only its control.
That block was then converted by fuseIf into a plain block;
as a result, that control value was dead.
However, the control value was still present in b.Values.
This prevented further fusing of that block.
This change beefs up the check in fuseIf to allow fusing
blocks that contain only dead values (if any).
In the case of #29218, this enables enough extra
fusing that the control value could be eliminated,
allowing all values in turn to be eliminated.
This change also fuses 34 new blocks during make.bash.
It is not clear that this fixes every variant of #29218,
but it is a reasonable standalone change.
And code like #29218 is rare and fundamentally buggy,
so we can handle new instances if/when they actually occur.
Fixes#29218
Negligible toolspeed impact.
name old time/op new time/op delta
Template 213ms ± 3% 213ms ± 2% ~ (p=0.914 n=97+88)
Unicode 89.8ms ± 2% 89.6ms ± 2% -0.22% (p=0.045 n=93+95)
GoTypes 712ms ± 3% 709ms ± 2% -0.35% (p=0.023 n=95+95)
Compiler 3.24s ± 2% 3.23s ± 2% -0.30% (p=0.020 n=98+97)
SSA 10.0s ± 1% 10.0s ± 1% ~ (p=0.382 n=98+99)
Flate 135ms ± 3% 135ms ± 2% ~ (p=0.983 n=98+98)
GoParser 158ms ± 2% 158ms ± 2% ~ (p=0.170 n=99+99)
Reflect 447ms ± 3% 447ms ± 2% ~ (p=0.538 n=98+89)
Tar 189ms ± 2% 189ms ± 3% ~ (p=0.874 n=95+96)
XML 251ms ± 2% 251ms ± 2% ~ (p=0.434 n=94+96)
[Geo mean] 427ms 426ms -0.15%
name old user-time/op new user-time/op delta
Template 264ms ± 2% 265ms ± 2% ~ (p=0.075 n=96+90)
Unicode 119ms ± 6% 119ms ± 7% ~ (p=0.864 n=99+98)
GoTypes 926ms ± 2% 924ms ± 2% ~ (p=0.071 n=94+94)
Compiler 4.38s ± 2% 4.37s ± 2% -0.34% (p=0.001 n=98+97)
SSA 13.4s ± 1% 13.4s ± 1% ~ (p=0.693 n=90+93)
Flate 162ms ± 3% 161ms ± 2% ~ (p=0.163 n=99+99)
GoParser 186ms ± 2% 186ms ± 3% ~ (p=0.130 n=96+100)
Reflect 572ms ± 3% 572ms ± 2% ~ (p=0.608 n=97+97)
Tar 239ms ± 2% 239ms ± 3% ~ (p=0.999 n=93+91)
XML 302ms ± 2% 302ms ± 2% ~ (p=0.627 n=91+97)
[Geo mean] 540ms 540ms -0.08%
file before after Δ %
asm 4862704 4858608 -4096 -0.084%
compile 24001568 24001680 +112 +0.000%
total 132520780 132516796 -3984 -0.003%
file before after Δ %
cmd/compile/internal/gc.a 8887638 8887596 -42 -0.000%
cmd/compile/internal/ssa.a 29995056 29998986 +3930 +0.013%
cmd/internal/obj/wasm.a 209444 203652 -5792 -2.765%
total 129471798 129469894 -1904 -0.001%
Change-Id: I2d18f9278e68b9766058ae8ca621e844f9d89dd8
Reviewed-on: https://go-review.googlesource.com/c/go/+/177140
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
This test was designed for #15609 and didn't consider nacl. It's not
worth adding new +build-guarded assembly files in issue15609.dir for
nacl, especially as nacl is going away.
Fixes#32206
Change-Id: Ic5bd48b4f790a1f7019100b8a72d4688df75512f
Reviewed-on: https://go-review.googlesource.com/c/go/+/178698
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, some tests under test/fixedbugs never run:
$ for d in test/fixedbugs/*.dir; do
! test -f "${d%.dir}.go" && echo "$d"
done
test/fixedbugs/issue15071.dir
test/fixedbugs/issue15609.dir
test/fixedbugs/issue29612.dir
Because they missed the corresponding ".go" file, so "go run run.go"
will skip them.
Add missing ".go" files for those tests to make sure they will be
collected and run.
While at it, add another action "runindir", which does "go run ."
inside the t.goDirName then check the output.
Change-Id: I88000b3663a6a615d90c1cf11844ea0377403e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/177798
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As an optimization, function literals capture variables by value when
they're not assigned and their address has not been taken. Because
result parameters are implicitly assigned through return statements
(which do not otherwise set the "assigned" flag), result parameters
are explicitly handled to always capture by reference.
However, the logic was slightly mistaken because it was only checking
if the variable in the immediately enclosing context was a return
parameter, whereas in a multiply-nested function literal it would
itself be another closure variable (PAUTOHEAP) rather than a return
parameter (PPARAMOUT).
The fix is to simply test the outermost variable, like the rest of the
if statement's tests were already doing.
Fixes#32175.
Change-Id: Ibadde033ff89a1b47584b3f56c0014d8e5a74512
Reviewed-on: https://go-review.googlesource.com/c/go/+/178541
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
First, remove the randomization of initialization order.
Then, revert to source code order instead of sorted package path order.
This restores the behavior that was in 1.12.
A larger change which will implement the suggestion in #31636 will
wait for 1.14. It's too complicated for 1.13 at this point (it has
tricky interactions with plugins).
Fixes#31636
Change-Id: I35b48e8cc21cf9f93c0973edd9193d2eac197628
Reviewed-on: https://go-review.googlesource.com/c/go/+/178297
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
typecheck type alias always replaces the original definition of the symbol.
This is wrong behavior because if the symbol's definition is replaced by a
local type alias, it ends up being written to compiled file as an alias,
instead of the original type.
To fix, only replace the definition of symbol with global type alias.
Fixes#31959
Change-Id: Id85a15e8a9d6a4b06727e655a95dc81e63df633a
Reviewed-on: https://go-review.googlesource.com/c/go/+/177378
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The test/codegen tests check all architectures
mentioned in the test file, but this requires
building at least the runtime for that architecture.
This CL changes the test to only check the local
architecture, leaving checking of other architectures
to the relevant builders, as usual.
This cuts 'go run run.go codegen' by 12r 78u 21s.
After this change, all.bash runs in ~4:40 on my laptop.
For #26473.
Change-Id: Ia0354d1aff2df2949f838528c8171410bc42dc8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/177577
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The CL 164718 mistyped the comparison flags. The rules for floating
point comparison should be GreaterThanF and GreaterEqualF. Fortunately,
the wrong optimizations were overwritten by other integer rules, so the
issue won't cause failure but just some performance impact.
The fixed CL optimizes the floating point test as follows.
source code: func foo(f float64) bool { return f > 4 || f < -4}
previous version: "FCMPD", "CSET\tGT", "CBZ"
fixed version: "FCMPD", BLE"
Add the test case.
Change-Id: Iea954fdbb8272b2d642dae0f816dc77286e6e1fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/177121
Reviewed-by: Ben Shi <powerman1st@163.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a slice's entries are sparse, we decide to initialize it dynamically
instead of statically. That's CL 151319.
But if we do initialize it dynamically, we still need to initialize
the static entries. Typically we do that, but the bug fixed here is
that we don't if the entry's value is itself an array or struct.
To fix, use initKindLocalCode to ensure that both static and
dynamic entries are initialized via code.
Fixes#31987
Change-Id: I1192ffdbfb5cd50445c1206c4a3d8253295201dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/176904
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
MOVBstore's value argument is a value, not a flag. We are storing
a byte so just use UInt8.
Fixes#31915.
Change-Id: Id799e5f44efc3a9c3d8480f6f25ad032c2a631bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/176719
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Adjust the dummy use function to a real use. As suggested by the
println calls in the test, nilptr2.go supposes to check that a
used nil pointer dereference panics. This use function is not
real enough so an optimized compiler such as gccgo could
eliminate the call.
The spec requires that even a dummy use would cause a panic.
Unfortunately, due to #31151 this is not true for gccgo at -O1 or
above.
Change-Id: Ie07c8a5969ab94dad82d4f7cfec30597c25b7c46
Reviewed-on: https://go-review.googlesource.com/c/go/+/176579
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change is a simple work-around to avoid a compiler crash
and provide a reasonable error message. A future change should
fix the root cause for this problem.
Fixes#23823.
Change-Id: Ifc80d9f4d35e063c378e54d5cd8d1cf4c0d2ec6a
Reviewed-on: https://go-review.googlesource.com/c/go/+/175518
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this CL we used to panic with "nil pointer dereference" because
the value we're calling assignTo on is the zero Value. Provide a better
error message.
Fixes#28748
Change-Id: I7dd4c9e30b599863664d91e78cc45878d8b0052e
Reviewed-on: https://go-review.googlesource.com/c/go/+/175440
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL adds intrinsics for the 64-bit addition and subtraction
functions in math/bits. These intrinsics use the condition code
to propagate the carry or borrow bit.
To make the carry chains more efficient I've removed the
'clobberFlags' property from most of the load and store
operations. Originally these ops did clobber flags when using
offsets that didn't fit in a signed 20-bit integer, however
that is no longer true.
As with other platforms the intrinsics are faster when executed
in a chain rather than a loop because currently we need to spill
and restore the carry bit between each loop iteration. We may
be able to reduce the need to do this on s390x (e.g. by using
compare-and-branch instructions that do not clobber flags) in the
future.
name old time/op new time/op delta
Add64 1.21ns ± 2% 2.03ns ± 2% +67.18% (p=0.000 n=7+10)
Add64multiple 2.98ns ± 3% 1.03ns ± 0% -65.39% (p=0.000 n=10+9)
Sub64 1.23ns ± 4% 2.03ns ± 1% +64.85% (p=0.000 n=10+10)
Sub64multiple 3.73ns ± 4% 1.04ns ± 1% -72.28% (p=0.000 n=10+8)
Change-Id: I913bbd5e19e6b95bef52f5bc4f14d6fe40119083
Reviewed-on: https://go-review.googlesource.com/c/go/+/174303
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
golang.org/cl/174498 add ONAME case to isStaticCompositeLiteral, to
detect global variable as compile-time constant.
It does report wrong for struct field, e.g:
o := one{i: two{i: 42}.i}
field i in two{i: 42} was reported as static composite literal, while it
should not.
In general, adding ONAME case for isStaticCompositeLiteral is probably
wrong.
Fixes#31782
Change-Id: Icde7d43bbb002b75df5c52b948b7126a4265e07b
Reviewed-on: https://go-review.googlesource.com/c/go/+/174837
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
golang.org/cl/174498 removes dynamic map entry handling in maplit, by
filtering the static entry only. It panics if it see a dynamic entry.
It relies on order to remove all dynamic entries.
But after recursively call order on the statics, some static entries
become dynamic, e.g OCONVIFACE node:
type i interface {
j()
}
type s struct{}
func (s) j() {}
type foo map[string]i
var f = foo{
"1": s{},
}
To fix it, we recursively call order on each static entry, if it changed
to dynamic, put entry to dynamic then.
Fixes#31777
Change-Id: I1004190ac8f2d1eaa4beb6beab989db74099b025
Reviewed-on: https://go-review.googlesource.com/c/go/+/174777
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This enables more of the testcases in memcombine for ppc64le,
and adds more detail to some existing.
Change-Id: Ic522a1175bed682b546909c96f9ea758f8db247c
Reviewed-on: https://go-review.googlesource.com/c/go/+/174737
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17
This general rule can compute divisibilty by one multiplication, and add
and a compare for odd divisors and an additional rotate for even divisors.
To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt". This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also needed.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.
Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.
On amd64, the divisibility check is 30-45% faster.
name old time/op new time/op delta`
DivisiblePow2constI64-4 0.83ns ± 1% 0.82ns ± 0% ~ (p=0.079 n=5+4)
DivisibleconstI64-4 2.68ns ± 1% 1.87ns ± 0% -30.33% (p=0.000 n=5+4)
DivisibleWDivconstI64-4 2.69ns ± 1% 2.71ns ± 3% ~ (p=1.000 n=5+5)
DivisiblePow2constI32-4 1.15ns ± 1% 1.15ns ± 0% ~ (p=0.238 n=5+4)
DivisibleconstI32-4 2.24ns ± 1% 1.20ns ± 0% -46.48% (p=0.016 n=5+4)
DivisibleWDivconstI32-4 2.27ns ± 1% 2.27ns ± 1% ~ (p=0.683 n=5+5)
DivisiblePow2constI16-4 0.81ns ± 1% 0.82ns ± 1% ~ (p=0.135 n=5+5)
DivisibleconstI16-4 2.11ns ± 2% 1.20ns ± 1% -42.99% (p=0.008 n=5+5)
DivisibleWDivconstI16-4 2.23ns ± 0% 2.27ns ± 2% +1.79% (p=0.029 n=4+4)
DivisiblePow2constI8-4 0.81ns ± 1% 0.81ns ± 1% ~ (p=0.286 n=5+5)
DivisibleconstI8-4 2.13ns ± 3% 1.19ns ± 1% -43.84% (p=0.008 n=5+5)
DivisibleWDivconstI8-4 2.23ns ± 1% 2.25ns ± 1% ~ (p=0.183 n=5+5)
Fixes#30282Fixes#15806
Change-Id: Id20d78263a4fdfe0509229ae4dfa2fede83fc1d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/173998
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In the statement x = a[i], the index panic should appear to come from
the line number of the '['. Previous to this CL we sometimes used the
line number of the '=' instead.
Fixes#29504
Change-Id: Ie718fd303c1ac2aee33e88d52c9ba9bcf220dea1
Reviewed-on: https://go-review.googlesource.com/c/go/+/174617
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Any code that imports the testing package forces the testing flags to be
defined, even in non-test binaries. People work around this today by
defining a copy of the testing.TB interface just to avoid importing
testing.
Fix this by moving flag registration into a new function, testing.Init.
Delay calling Init until the testing binary begins to run, in
testing.MainStart.
Init is exported for cases where users need the testing flags to be
defined outside of a "go test" context. In particular, this may be
needed where testing.Benchmark is called outside of a test.
Fixes#21051
Change-Id: Ib7e02459e693c26ae1ba71bbae7d455a91118ee3
Reviewed-on: https://go-review.googlesource.com/c/go/+/173722
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change creates an intrinsic for Add64 for ppc64x and adds a
testcase for it.
name old time/op new time/op delta
Add64-160 1.90ns ±40% 2.29ns ± 0% ~ (p=0.119 n=5+5)
Add64multiple-160 6.69ns ± 2% 2.45ns ± 4% -63.47% (p=0.016 n=4+5)
Change-Id: I9abe6fb023fdf62eea3c9b46a1820f60bb0a7f97
Reviewed-on: https://go-review.googlesource.com/c/go/+/173758
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17
This general rule can compute divisibilty by one multiplication and a compare
for odd divisors and an additional rotate for even divisors.
To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt". This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also available.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.
Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.
Additional rules to lower the generic RotateLeft* ops were also applied.
On amd64, the divisibility check is 25-50% faster.
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.08ns ± 1% ~ (p=0.881 n=5+5)
DivisibleconstI64-4 2.67ns ± 0% 2.67ns ± 1% ~ (p=1.000 n=5+5)
DivisibleWDivconstI64-4 2.67ns ± 0% 2.67ns ± 0% ~ (p=0.683 n=5+5)
DivconstU64-4 2.08ns ± 1% 2.08ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstU64-4 2.77ns ± 1% 1.55ns ± 2% -43.90% (p=0.008 n=5+5)
DivisibleWDivconstU64-4 2.99ns ± 1% 2.99ns ± 1% ~ (p=1.000 n=5+5)
DivconstI32-4 1.53ns ± 2% 1.53ns ± 0% ~ (p=1.000 n=5+5)
DivisibleconstI32-4 2.23ns ± 0% 2.25ns ± 3% ~ (p=0.167 n=5+5)
DivisibleWDivconstI32-4 2.27ns ± 1% 2.27ns ± 1% ~ (p=0.429 n=5+5)
DivconstU32-4 1.78ns ± 0% 1.78ns ± 1% ~ (p=1.000 n=4+5)
DivisibleconstU32-4 2.52ns ± 2% 1.26ns ± 0% -49.96% (p=0.000 n=5+4)
DivisibleWDivconstU32-4 2.63ns ± 0% 2.85ns ±10% +8.29% (p=0.016 n=4+5)
DivconstI16-4 1.54ns ± 0% 1.54ns ± 0% ~ (p=0.333 n=4+5)
DivisibleconstI16-4 2.10ns ± 0% 2.10ns ± 1% ~ (p=0.571 n=4+5)
DivisibleWDivconstI16-4 2.22ns ± 0% 2.23ns ± 1% ~ (p=0.556 n=4+5)
DivconstU16-4 1.09ns ± 0% 1.01ns ± 1% -7.74% (p=0.000 n=4+5)
DivisibleconstU16-4 1.83ns ± 0% 1.26ns ± 0% -31.52% (p=0.008 n=5+5)
DivisibleWDivconstU16-4 1.88ns ± 0% 1.89ns ± 1% ~ (p=0.365 n=5+5)
DivconstI8-4 1.54ns ± 1% 1.54ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstI8-4 2.10ns ± 0% 2.11ns ± 0% ~ (p=0.238 n=5+4)
DivisibleWDivconstI8-4 2.22ns ± 0% 2.23ns ± 2% ~ (p=0.762 n=5+5)
DivconstU8-4 0.92ns ± 1% 0.94ns ± 1% +2.65% (p=0.008 n=5+5)
DivisibleconstU8-4 1.66ns ± 0% 1.26ns ± 1% -24.28% (p=0.008 n=5+5)
DivisibleWDivconstU8-4 1.79ns ± 0% 1.80ns ± 1% ~ (p=0.079 n=4+5)
A follow-up change will address the signed division case.
Updates #30282
Change-Id: I7e995f167179aa5c76bb10fbcbeb49c520943403
Reviewed-on: https://go-review.googlesource.com/c/go/+/168037
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
For powers of two (c=1<<k), the divisibility check x%c == 0 can be made
just by checking the trailing zeroes via a mask x&(c-1) == 0 even for signed
integers. This avoids division fix-ups when just divisibility check is needed.
To apply this rule, we match on the fixed-up version of the division. This is
neccessary because the mod and division rewrite rules are already applied
during the initial opt pass.
The speed up on amd64 due to elimination of unneccessary fix-up code is ~55%:
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.09ns ± 1% ~ (p=0.730 n=5+5)
DivisiblePow2constI64-4 1.78ns ± 1% 0.81ns ± 1% -54.66% (p=0.008 n=5+5)
DivconstU64-4 2.08ns ± 0% 2.08ns ± 0% ~ (p=0.683 n=5+5)
DivconstI32-4 1.53ns ± 0% 1.53ns ± 1% ~ (p=0.968 n=4+5)
DivisiblePow2constI32-4 1.79ns ± 1% 0.81ns ± 1% -54.97% (p=0.008 n=5+5)
DivconstU32-4 1.78ns ± 1% 1.80ns ± 2% ~ (p=0.206 n=5+5)
DivconstI16-4 1.54ns ± 2% 1.54ns ± 0% ~ (p=0.238 n=5+4)
DivisiblePow2constI16-4 1.78ns ± 0% 0.81ns ± 1% -54.72% (p=0.000 n=4+5)
DivconstU16-4 1.00ns ± 5% 1.01ns ± 1% ~ (p=0.119 n=5+5)
DivconstI8-4 1.54ns ± 0% 1.54ns ± 2% ~ (p=0.571 n=4+5)
DivisiblePow2constI8-4 1.78ns ± 0% 0.82ns ± 8% -53.71% (p=0.008 n=5+5)
DivconstU8-4 0.93ns ± 1% 0.93ns ± 1% ~ (p=0.643 n=5+5)
A follow-up CL will address the general case of x%c == 0 for signed integers.
Updates #15806
Change-Id: Iabadbbe369b6e0998c8ce85d038ebc236142e42a
Reviewed-on: https://go-review.googlesource.com/c/go/+/173557
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We already skipped blank field initialization in non-global contexts.
This change makes the global context treatment match.
Fixes#31546
Change-Id: I40acce49b0a9deb351ae0da098f4c114e425ec63
Reviewed-on: https://go-review.googlesource.com/c/go/+/173723
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This pair of packages caused a crash in gollvm, due to a glitch in the
way the front end handles empty/non-name parameters for functions that
are inline candidates.
Updates #31637.
Change-Id: I571c0658a00974dd36025e571638c0c836a3cdfd
Reviewed-on: https://go-review.googlesource.com/c/go/+/173617
Run-TryBot: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 168038 (git 68819fb6d2)
Reason for revert: Doesn't work on 32 bit archs.
Change-Id: Idec9098060dc65bc2f774c5383f0477f8eb63a3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/173442
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For powers of two (c=1<<k), the divisibility check x%c == 0 can be made
just by checking the trailing zeroes via a mask x&(c-1)==0 even for signed
integers. This avoids division fixups when just divisibility check is needed.
To apply this rule the generic divisibility rule for A%B = A-(A/B*B) is disabled
on the "opt" pass, but this does not affect generated code as this rule is applied
later.
The speed up on amd64 due to elimination of unneccessary fixup code is ~55%:
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.07ns ± 0% ~ (p=0.079 n=5+5)
DivisiblePow2constI64-4 1.78ns ± 1% 0.81ns ± 1% -54.55% (p=0.008 n=5+5)
DivconstU64-4 2.08ns ± 0% 2.08ns ± 0% ~ (p=1.000 n=5+5)
DivconstI32-4 1.53ns ± 0% 1.53ns ± 0% ~ (all equal)
DivisiblePow2constI32-4 1.79ns ± 1% 0.81ns ± 4% -54.75% (p=0.008 n=5+5)
DivconstU32-4 1.78ns ± 1% 1.78ns ± 1% ~ (p=1.000 n=5+5)
DivconstI16-4 1.54ns ± 2% 1.53ns ± 0% ~ (p=0.333 n=5+4)
DivisiblePow2constI16-4 1.78ns ± 0% 0.79ns ± 1% -55.39% (p=0.000 n=4+5)
DivconstU16-4 1.00ns ± 5% 0.99ns ± 1% ~ (p=0.730 n=5+5)
DivconstI8-4 1.54ns ± 0% 1.53ns ± 0% ~ (p=0.714 n=4+5)
DivisiblePow2constI8-4 1.78ns ± 0% 0.80ns ± 0% -55.06% (p=0.000 n=5+4)
DivconstU8-4 0.93ns ± 1% 0.95ns ± 1% +1.72% (p=0.024 n=5+5)
A follow-up CL will address the general case of x%c == 0 for signed integers.
Updates #15806
Change-Id: I0d284863774b1bc8c4ce87443bbaec6103e14ef4
Reviewed-on: https://go-review.googlesource.com/c/go/+/168038
Reviewed-by: Keith Randall <khr@golang.org>
In 31618, we end up comparing the is-stmt-ness of positions
to repurpose real instructions as inline marks. If the is-stmt-ness
doesn't match, we end up not being able to remove the inline mark.
Always use statement-full positions to do the matching, so we
always find a match if there is one.
Also always use positions that are statements for inline marks.
Fixes#31618
Change-Id: Idaf39bdb32fa45238d5cd52973cadf4504f947d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/173324
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Stack object generation code was always using the local package name
for its symbol. Normally that doesn't matter, as we usually only
compile functions in the local package. But for wrappers, the compiler
generates functions which live in other packages. When there are two
other packages with identical functions to wrap, the same name appears
twice, and the compiler goes boom.
Fixes#31252
Change-Id: I7026eebabe562cb159b8b6046cf656afd336ba25
Reviewed-on: https://go-review.googlesource.com/c/go/+/171464
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The special case logic for go/defer arguments in Escape.call was
scattered around a bit and was somewhat inconsistently handled across
different types of function calls and parameters. This CL pulls the
logic out into a separate callStmt method that's used uniformly for
all kinds of function calls and arguments.
Fixes#31573.
Change-Id: Icdcdf611754dc3fcf1af7cb52879fb4b73a7a31f
Reviewed-on: https://go-review.googlesource.com/c/go/+/173019
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
A check in inl.go to prevent inlining of functions calling
either getcallerpc or getcallersp does not work when these
functions are intrinsics. Swap checks to fix.
Includes test.
No bug, this was discovered in the course of a ridiculous
experiment with inlining.
Change-Id: Ie1392523bb89882d586678f2674e1a4eadc5e431
Reviewed-on: https://go-review.googlesource.com/c/go/+/172217
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Casp1 is implemented in Go on js/wasm, so escape analysis correctly
determines that the "old" parameter does not escape (which is good).
Unfortunately, test/run.go doesn't have a way to indicate that ERROR
messages are optional, and cmd/compile only emits diagnostics for "var
x int" when it's moved to the heap; not when it stays on the stack.
To accomodate that this test currently passes on some GOARCHes but not
others, rewrite the Casp1 test to use "x := new(int)" and allow both
"new(int) escapes to heap" or "new(int) does not escape".
Updates #31525.
Change-Id: I40150a7ff9042f184386ccdb2d4d428f63e8ba4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/172602
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The //go:noescape directive says that arguments don't leak at all,
which is too aggressive of a claim for functions that return pointers
derived from their parameters.
Remove the directive for now. Long term fix will require a new
directive that allows more fine-grained control over escape analysis
information supplied for functions implemented in assembly.
Also, update the BAD comments in the test cases for Loadp: we really
want that *ptr leaks to the result parameter, not that *ptr leaks to
the heap.
Updates #31525.
Change-Id: Ibfa61f2b70daa7ed3223056b57eeee777eef2e31
Reviewed-on: https://go-review.googlesource.com/c/go/+/172578
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Cherry pointed out this case in review for CL 136496. That CL was
slightly too aggressive, and I likely would have made the same mistake
if I tried it myself.
Updates #27772.
Change-Id: I1fafabb9f8d9aba0494aa71333a4e17cf1bac5c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/172421
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
There weren't any tests to make sure these work correctly, and this
led to escape analysis regressions in both linux/s390x and js/wasm.
The underlying issue that cmd/compile is only getting some of these
correct because escape analysis doesn't understand //go:linkname is
still present, but at least this addresses the fragility aspect.
Updates #15283.
Change-Id: I546aee1899d098b2e3de45e9b33c3ca22de485f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/172420
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
In typecheckclosure, a xfunc node will be put to xtop. But that node can
be shared between multiple closures, like in a const declaration group:
const (
x = unsafe.Sizeof(func() {})
y
)
It makes a xfunc node appears multiple times in xtop, causing duplicate
initLSym run.
To fix this issue, we only do typecheck for xfunc one time, and setup
closure node earlier in typecheckclosure process.
Fixes#30709
Change-Id: Ic924a157ee9f3e5d776214bef5390849ddc8aab9
Reviewed-on: https://go-review.googlesource.com/c/go/+/172298
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new escape analysis implementation tries to emit debugging
diagnostics that are compatible with the existing implementation, but
there's a handful of cases that are easier to handle by updating the
test expectations instead.
For regress tests that need updating, the original file is copied to
oldescapeXXX.go.go with -newescape=false added to the //errorcheck
line, while the file is updated in place with -newescape=true and new
test requirements.
Notable test changes:
1) escape_because.go looks for a lot of detailed internal debugging
messages that are fairly particular to how esc.go works and that I
haven't attempted to port over to escape.go yet.
2) There are a lot of "leaking param: x to result ~r1 level=-1"
messages for code like
func(p *int) *T { return &T{p} }
that were simply wrong. Here &T must be heap allocated unconditionally
(because it's being returned); and since p is stored into it, p
escapes unconditionally too. esc.go incorrectly reports that p escapes
conditionally only if the returned pointer escaped.
3) esc.go used to print each "leaking param" analysis result as it
discovered them, which could lead to redundant messages (e.g., that a
param leaks at level=0 and level=1). escape.go instead prints
everything at the end, once it knows the shortest path to each sink.
4) esc.go didn't precisely model direct-interface types, resulting in
some values unnecessarily escaping to the heap when stored into
non-escaping interface values.
5) For functions written in assembly, esc.go only printed "does not
escape" messages, whereas escape.go prints "does not escape" or
"leaking param" as appropriate, consistent with the behavior for
functions written in Go.
6) 12 tests included "BAD" annotations identifying cases where esc.go
was unnecessarily heap allocating something. These are all fixed by
escape.go.
Updates #23109.
Change-Id: Iabc9eb14c94c9cadde3b183478d1fd54f013502f
Reviewed-on: https://go-review.googlesource.com/c/go/+/170447
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For a failed interface conversion not in ",ok" form, getitab
calls itab.init to get the name of the missing method for the
panic message. itab.init will try to find the methods, populate
the method table as it goes. When some method is missing, it sets
itab.fun[0] to 0 before return. There is a small window that
itab.fun[0] could be non-zero.
If concurrently, another goroutine tries to do the same interface
conversion, it will read the same itab's fun[0]. If this happens
in the small window, it sees a non-zero fun[0] and thinks the
conversion succeeded, which is bad.
Fix the race by setting fun[0] to non-zero only when we know the
conversion succeeds. While here, also simplify the syntax
slightly.
Fixes#31419.
Change-Id: Ied34d3043079eb933e330c5877b85e13f98f1916
Reviewed-on: https://go-review.googlesource.com/c/go/+/171759
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These new calls should not prevent NOSPLIT promotion, like the old ones.
These new calls should not prevent racefuncenter/exit removal.
(The latter was already true, as the new calls are not yet lowered
to StaticCalls at the point where racefuncenter/exit removal is done.)
Add tests to make sure we don't regress (again).
Fixes#31219
Change-Id: I3fb6b17cdd32c425829f1e2498defa813a5a9ace
Reviewed-on: https://go-review.googlesource.com/c/go/+/170639
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Some var declarations return "extra expression" or "missing expression"
errors when they should return “assignment mismatch” instead. Change
the returned error messages to exhibit the desired behavior.
Fixes#30085.
Change-Id: I7189355fbb0f976d70100779db4f81a9ae64fb11
Reviewed-on: https://go-review.googlesource.com/c/go/+/161558
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
"leaking closure reference" is redundant for similar reasons as "&x
escapes to heap" for OADDR nodes: the reference itself does not
allocate, and we already report when the referenced variable is moved
to heap.
"mark escaped content" is redundant with "leaking param content".
Updates #23109.
Change-Id: I1ab599cb1e8434f1918dd80596a70cba7dc8a0cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/170321
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For most nodes (e.g., OPTRLIT, OMAKESLICE, OCONVIFACE), escape
analysis prints "escapes to heap" or "does not escape" to indicate
whether that node's allocation can be heap or stack allocated.
These messages are also emitted for OADDR, even though OADDR does not
actually allocate anything itself. Moreover, it's redundant because
escape analysis already prints "moved to heap" diagnostics when an
OADDR node like "&x" causes x to require heap allocation.
Because OADDR nodes don't allocate memory, my escape analysis rewrite
doesn't naturally emit the "escapes to heap" / "does not escape"
diagnostics for them. It's also non-trivial to replicate the exact
semantics esc.go uses for OADDR.
Since there are so many of these messages, I'm disabling them in this
CL by themselves. I modified esc.go to suppress the Warnl calls
without any other behavior changes, and then used a shell script to
automatically remove any ERROR messages mentioned by run.go in
"missing error" or "no match for" lines.
Fixes#16300.
Updates #23109.
Change-Id: I3993e2743c3ff83ccd0893f4e73b366ff8871a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/170319
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
The bug in 29612 is that there are two similar-looking anonymous interface
types in two different packages, ./p1/ssa and ./p2/ssa:
v.(interface{ foo() }).foo()
These types should be treated differently because the unexported method
makes the types different (according to the spec).
But when generating the type descriptors for those two types, they
both have the name "interface { ssa.foo() }". They thus get the same
symbol, and the linker happily unifies them. It picks an arbitrary one
for the runtime to use, but that breaks conversions from concrete types
that have a foo method from the package which had its interface type
overwritten.
We need to encode the metadata symbol for unexported methods as package
path qualified (The same as we did in CL 27791 for struct fields).
So switching from FmtUnsigned to Fmtleft by default fixes the issue.
In case of generating namedata, FmtUnsigned is used.
The benchmark result ends up in no significant change of compiled binary
compare to the immediate parent.
Fixes#29612
Change-Id: I775aff91ae4a1bb16eb18a48d55e3b606f3f3352
Reviewed-on: https://go-review.googlesource.com/c/go/+/170157
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When branching at a bounds check for indexing or slicing ops, prove currently
only learns from the upper bound. On the positive branch, we currently learn
i < len(a) (or i <= len(a)) in both the signed and unsigned domains.
This CL makes prove also learn from the lower bound. Specifically, on the
positive branch from index or slicing ops, prove will now ALSO learn i >= 0 in
the signed domain (this fact is of no value in the unsigned domain).
The substantive change itself is only an additional call to addRestrictions,
though I've also inverted the nested switch statements around that call for the
sake of clarity.
This CL removes 92 bounds checks from std and cmd. It passes all tests and
shows no deltas on compilecmp.
Fixes#28885
Change-Id: I13eccc36e640eb599fa6dc5aa3be3c7d7abd2d9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/170121
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Would suggest extending capabilities (32-bit, unsigned, etc)
in separate CLs because prove bugs are so mystifying.
This implements the suggestion in this comment
https://go-review.googlesource.com/c/go/+/104041/10/src/cmd/compile/internal/ssa/loopbce.go#164
for inferring properly bounded iteration for loops of the form
for i := K0; i < KNN-(K-1); i += K
for i := K0; i <= KNN-K; i += K
Where KNN is "known non negative" (i.e., len or cap) and K
is also not negative. Because i <= KNN-K, i+K <= KNN and
no overflow occurs.
Also handles decreasing case (K1 > 0)
for i := KNN; i >= K0; i -= K1
which works when MININT+K1 < K0
(i.e. MININT < K0-K1, no overflow)
Signed only, also only 64 bit for now.
Change-Id: I5da6015aba2f781ec76c4ad59c9c48d952325fdc
Reviewed-on: https://go-review.googlesource.com/c/go/+/136375
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Prove currently fails to remove bounds checks of the form:
if i >= 0 { // hint that i is non-negative
for i < len(data) { // i becomes Phi in the loop SSA
_ = data[i] // data[Phi]; bounds check!!
i++
}
}
addIndVarRestrictions fails to identify that the loop induction
variable, (Phi), is non-negative. As a result, the restrictions,
i <= Phi < len(data), are only added for the signed domain. When
testing the bounds check, addBranchRestrictions is similarly unable
to infer that Phi is non-negative. As a result, the restriction,
Phi >= len(data), is only added/tested for the unsigned domain.
This CL changes the isNonNegative method to utilise the factTable's
partially ordered set (poset). It also adds field factTable.zero to
allow isNonNegative to query the poset using the zero(0) constant
found or created early in prove.
Fixes#28956
Change-Id: I792f886c652eeaa339b0d57d5faefbf5922fe44f
Reviewed-on: https://go-review.googlesource.com/c/go/+/161437
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Typechecking treats all untyped numbers as integers for the purposes
of validating operators. However, when I refactoring constant
operation evalution in golang.org/cl/139901, I mistakenly interpreted
that the only invalid case that needed to be preserved was % (modulo)
on floating-point values.
This CL restores the other remaining cases that were dropped from that
CL. It also uses the phrasing "invalid operation" instead of "illegal
constant expression" for better consistency with the rest of
cmd/compile and with go/types.
Lastly, this CL extends setconst to recognize failed constant folding
(e.g., division by zero) so that we can properly mark those
expressions as broken rather than continuing forward with bogus values
that might lead to further spurious errors.
Fixes#31060.
Change-Id: I1ab6491371925e22bc8b95649f1a0eed010abca6
Reviewed-on: https://go-review.googlesource.com/c/go/+/169719
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Update the issue 30908 test to work with the no-opt builder
(this requires a corresponding change in the linker as well).
As part of this change, 'rundir' tests are now linked without
passing "-w" to the linker.
Updates #30908.
Fixes#31034.
Change-Id: Ic776e1607075c295e409e1c8230aaf55a79a6323
Reviewed-on: https://go-review.googlesource.com/c/go/+/169161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 135377 introduces pass strings and slices to convT2{E,I} by value.
Before that CL, all types, except interface will be allocated temporary
address. The CL changes the logic that only constant and type which
needs address (determine by convFuncName) will be allocated.
It fails to cover the case where type is static composite literal.
Adding condition to check that case fixes the issue.
Also, static composite literal node implies constant type, so consttype
checking can be removed.
Fixes#30956
Change-Id: Ifc750a029fb4889c2d06e73e44bf85e6ef4ce881
Reviewed-on: https://go-review.googlesource.com/c/go/+/168858
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Some special-case code paths in order.go didn't expect OCALLFUNC to
have Ninit; in particular, OAS2FUNC and ODEFER/OGO failed to call
o.init on their child OCALLFUNC node. This resulted in not all of the
AST being properly ordered.
This was noticed because order is responsible for introducing an
invariant around how OAPPEND is used, which is enforced by walk.
However, there were perhaps simpler cases (e.g., simple order of
evaluation) that were being silently miscompiled.
Fixes#31010.
Change-Id: Ib928890ab5ec2aebd8e30a030bc2b404387f9123
Reviewed-on: https://go-review.googlesource.com/c/go/+/169257
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
New test case designed to mimic the code in issue 30908, which
features duplicate but non-indentical DWARF abstract subprogram DIEs.
Updates #30908.
Change-Id: Iacb4b53e6a988e46c801cdac236cef883c553f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/168957
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
For "rundir" tests, allow users to add in linker flags as well as
compiler flags, e.g.
// rundir -m -ldflags -w
The directive above will pass "-m" to the compiler on each package compilation
and "-w" to the linker for the final link.
In addition, if "-P" is specified with 'rundir', then for each compile
pass in "-p <X>" to set the packagepath explicitly, which is closer to
how the compiler is run by 'go build'.
Change-Id: I04720011a89d1bd8dcb4f2ccb4af1d74f6a01da1
Reviewed-on: https://go-review.googlesource.com/c/go/+/168977
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It is possible that a "volatile" value (one that can be clobbered
by preparing args of a call) to be used in multiple write barrier
calls. We used to copy the volatile value right before each call.
But this doesn't work if the value is used the second time, after
the first call where it is already clobbered. Copy it before
emitting any call.
Fixes#30977.
Change-Id: Iedcc91ad848d5ded547bf37a8359c125d32e994c
Reviewed-on: https://go-review.googlesource.com/c/go/+/168677
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL instrinsifies Add64 with arm64 instruction sequence ADDS, ADCS
and ADC, and optimzes the case of carry chains.The CL also changes the
test code so that the intrinsic implementation can be tested.
Benchmarks:
name old time/op new time/op delta
Add-224 2.500000ns +- 0% 2.090000ns +- 4% -16.40% (p=0.000 n=9+10)
Add32-224 2.500000ns +- 0% 2.500000ns +- 0% ~ (all equal)
Add64-224 2.500000ns +- 0% 1.577778ns +- 2% -36.89% (p=0.000 n=10+9)
Add64multiple-224 6.000000ns +- 0% 2.000000ns +- 0% -66.67% (p=0.000 n=10+10)
Change-Id: I6ee91c9a85c16cc72ade5fd94868c579f16c7615
Reviewed-on: https://go-review.googlesource.com/c/go/+/159017
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
'SUBQ $-0x80, r' is shorter to encode than 'ADDQ $0x80, r',
and functionally equivalent. Use it instead.
Shaves off a few bytes here and there:
file before after Δ %
compile 25935856 25927664 -8192 -0.032%
nm 4251840 4247744 -4096 -0.096%
Change-Id: Ia9e02ea38cbded6a52a613b92e3a914f878d931e
Reviewed-on: https://go-review.googlesource.com/c/go/+/168344
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When initializing a new object, we're often writing
1) to a location that doesn't have a pointer to a heap object
2) a pointer that doesn't point to a heap object
When both those conditions are true, we can avoid the write barrier.
This CL detects case 1 by looking for writes to known-zeroed
locations. The results of runtime.newobject are zeroed, and we
perform a simple tracking of which parts of that object are written so
we can determine what part remains zero at each write.
This CL detects case 2 by looking for addresses of globals (including
the types and itabs which are used in interfaces) and for nil pointers.
Makes cmd/go 0.3% smaller. Some particular cases, like the slice
literal in #29573, can get much smaller.
TODO: we can remove actual zero writes also with this mechanism.
Update #29573
Change-Id: Ie74a3533775ea88da0495ba02458391e5db26cb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/156363
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
