As noted in bug #10980, an empty PEM block is encoded as
-----BEGIN foo-----
-----END foo-----
However, Decode failed to process this.
RFC 1421 doesn't answer what the encoding of the empty block should be
because PEM messages always contain at least one header. However, PEM
these days is just the encoding format – nobody uses the rest of PEM any
longer.
Having the empty block not contain a newline seems most correct because
https://tools.ietf.org/html/rfc1421#section-9 clearly says that the
optional “pemtext” carries the leading new-line with it. So if omitted,
the new-line should be omitted too.
None the less, this changes makes encoding/pem permissive, accepting any
number of blank lines in an empty PEM block.
Fixes#10980
Change-Id: If36bdfbf991ee281eccd50b56ddc95f24c6debb2
Reviewed-on: https://go-review.googlesource.com/10516
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
I think it's worth mentioning.
But the final decision is up to you.
Change-Id: I3959132600ecc554988524ede73a7f6e8eac8353
Reviewed-on: https://go-review.googlesource.com/10551
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
They're each architecture-specific.
Let them share.
Reduces Prog size to 288, which is the
next smaller malloc class.
Reduces inuse_space while compiling the
rotate tests by ~3.2%.
Change-Id: Ica8ec90e466c97b569745fffff0e5acd364e55fa
Reviewed-on: https://go-review.googlesource.com/10514
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
That which cannot happen has not happened.
No immediate changes to Addr or Prog size.
Change-Id: I4cb9315f2c9f5f92eda340bfc4abb46395fa467f
Reviewed-on: https://go-review.googlesource.com/10513
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Printed and Width were unused.
Despite only removing two bytes, due to alignment, 8 bytes are saved
on 64-bit:
Before: unsafe.Sizeof(obj.Prog{}) == 304
After: unsafe.Sizeof(obj.Prog{}) == 296
The next size class below 320 (304=>19(320)) is 288. Still 8 bytes
away from that.
Change-Id: I8d1632dd40d387f7036c03c65ea4d64e9b6218c3
Reviewed-on: https://go-review.googlesource.com/10511
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
- (*Float).Scan conflicted with fmt.Scanner.Scan; it was also only used
internally. Removed it, as well as the companion ScanFloat function.
- (*Float).Parse (and thus ParseFloat) can now also parse infinities.
As a result, more code could be simplified.
- Fixed a bug in rounding (round may implicitly be called for infinite
values). Found via existing test cases, after simplifying some code.
- Added more test cases.
Fixes issue #10938.
Change-Id: I1df97821654f034965ba8b82b272e52e6dc427f1
Reviewed-on: https://go-review.googlesource.com/10498
Reviewed-by: Alan Donovan <adonovan@google.com>
This paves the way for a fmt-compatible (*Float).Format method.
A better name then Text is still desirable (suggestions welcome).
This is partly fixing issue #10938.
Change-Id: I59c20a8cee11f5dba059fe0f38b414fe75f2ab13
Reviewed-on: https://go-review.googlesource.com/10493
Reviewed-by: Alan Donovan <adonovan@google.com>
It is almost never set and Addr is large, so having the full struct
in the Prog wastes memory most of the time.
Before (on a 64-bit system):
$ sizeof -p cmd/internal/obj Addr Prog
Addr 80
Prog 376
$
After:
$ sizeof -p cmd/internal/obj Addr Prog
Addr 80
Prog 304
$
Change-Id: I491f201241f87543964a7d0f48b85830759be9d0
Reviewed-on: https://go-review.googlesource.com/10457
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Memory usage has been reduced.
The tests are still slow,
but that is issue #10571.
/usr/bin/time shows significant variation
in the peak memory usage compiling with tip.
This is unsurprising, given GC.
Using Go 1.4.2, memory is stable at 410mb.
Using tip at d2ee09298,
memory ranges from 470mb (+15%) to 534mb (+30%),
with a mean of 504mb (+23%), with n=50.
Fixes#9933.
Change-Id: Id31f3ae086ec324abf70e8f1a8044c4a0c27e274
Reviewed-on: https://go-review.googlesource.com/10211
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use pkgimport == nil (or not) to distinguish between
parsing .go source files where "p" exponent specifier
is not allowed and parsing .a or .o export data where
it is. Use that to control error when p-exponent is
seen.
Fixes#9036
Change-Id: I8924f09c91d4945ef3f20e80a6e544008a94a7e4
Reviewed-on: https://go-review.googlesource.com/10450
Reviewed-by: Russ Cox <rsc@golang.org>
This is an automated follow-up to CL 10210.
It was generated with a combination of eg and gofmt -r.
No functional changes. Passes toolstash -cmp.
Change-Id: I35f5897948a270b472d8cf80612071b4b29e9a2b
Reviewed-on: https://go-review.googlesource.com/10253
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
TestGoroutineParallelism can deadlock if the GC runs during the
test. Currently it tries to prevent this by forcing a GC before the
test, but this is best effort and fails completely if GOGC is very low
for testing.
This change replaces this best-effort fix with simply setting GOGC to
off for the duration of the test.
Change-Id: I8229310833f241b149ebcd32845870c1cb14e9f8
Reviewed-on: https://go-review.googlesource.com/10454
Reviewed-by: Russ Cox <rsc@golang.org>
Currently when the race detector is enabled, orderexpr always creates
a temporary for slice and append operations. This used to be necessary
because the race detector had a different code path for slice
assignment that required this temporary. Unfortunately, creating this
temporary inhibits the optimization that eliminates write barriers
when a slice is assigned only to change its length or cap. For most
code, this is bad for performance, and in go:nowritebarrier functions
in the runtime, this can mean the difference between compiling and not
compiling.
Now the race detector uses the regular slice assignment code, so
creating this temporary is no longer necessary.
Change-Id: I296042e1edc571b77c407f709c2ff9091c4aa795
Reviewed-on: https://go-review.googlesource.com/10456
Reviewed-by: Russ Cox <rsc@golang.org>
Most runtime tests that invoke the compiler to build a sub-test binary
do so with a special environment constructed by testEnv that strips
out environment variables that should apply to the test but not to the
build.
Fix TestGdbPython to use this test environment when invoking go build,
like other tests do.
Change-Id: Iafdf89d4765c587cbebc427a5d61cb8a7e71b326
Reviewed-on: https://go-review.googlesource.com/10455
Reviewed-by: Russ Cox <rsc@golang.org>
A decimal represented 0.0 with a 0-length mantissa and undefined
exponent, but the formatting code assumes a valid zero exponent
if the float value is 0.0. The code worked because we allocate a
new decimal value each time and because there's no rounding that
lead to 0.0.
Change-Id: Ifd771d7709de83b87fdbf141786286b4c3e13d4f
Reviewed-on: https://go-review.googlesource.com/10448
Reviewed-by: Alan Donovan <adonovan@google.com>
This is dead code that was missed
during the 'go tool compile' migration.
Change-Id: Ice2af8a9ef72f8fd5f82225ee261854d93b659f1
Reviewed-on: https://go-review.googlesource.com/10430
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It shrinks Prog type from 448 bytes down to 376 bytes on amd64.
It also makes sense, because I don't know of any modern architecture
that have instructions which can write to two destinations, none of
which is a register (even x86 doesn't have such instructions).
Change-Id: I3061f1c9ac93d79ee2b92ecb9049641d0e0f6300
Reviewed-on: https://go-review.googlesource.com/10330
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
This speeds up sharded builds notably, by 1 second * the number of
tests.
Change-Id: Ib0295c31e4974f3003f72cb16c48949812b6f22b
Reviewed-on: https://go-review.googlesource.com/10460
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
- factor out handling of sign
- rename bstring, pstring to fmtB, fmtP consistent with fmtE, fmtF
- move all float-to-string conversion functions into ftoa.go
- no functional changes
Change-Id: I5970ecb874dc9c387630b59147d90bda16a5d8e6
Reviewed-on: https://go-review.googlesource.com/10387
Reviewed-by: Alan Donovan <adonovan@google.com>
Added a lineno parameter to treecopy and listtreecopy
(ignored if = 0). When nodes are copied the copy is
assigned the non-zero lineno (normally this would be
the destination).
Fixes#8183
Change-Id: Iffb767a745093fb89aa08bf8a7692c2f0122be98
Reviewed-on: https://go-review.googlesource.com/10334
Reviewed-by: Russ Cox <rsc@golang.org>
We already read the address of a gcmask/gcprog out of the type data, but I
didn't know how many bytes to read. But it turns out that it's easy to
calculate, so change to do that. This means that we no longer depend on the
local symbols being present, allowing me to strip the shared libraries for
distribution and make them a lot smaller.
As a bonus, this makes LSym another 24 bytes smaller, down to 296 bytes now.
Change-Id: I379d359e28d63afae6753efd23efdf1fbb716992
Reviewed-on: https://go-review.googlesource.com/10377
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The motivation for this is the innocuous looking test case that is added. This
creates a stack exe -> libdep2.so -> libdep.so -> libruntime.so. The problem
comes from the fact that a function from libdep.so gets inlined all the way
into exe. This (unsurprisingly) means that the object file for exe references
symbols from libdep.so, which means that -ldep needs to be passed when linking
exe and it isn't. The fix is simply to pass it -- there is no harm in passing
it when it's not needed.
The thing is, it's not clear at all in the current code to see how the linker
can know that libdep2 is linked against libdep. It could look through the
DT_NEEDED entries in libdep2 and try to guess which are Go libraries, but it
feels better to be explicit. So this adds another SHT_NOTE section that lists
the shared libraries a shared library was linked against, and makes sure the
complete set of depended upon shared libraries is passed to the external
linker.
Change-Id: I79aa6f98b4db4721d657a7eb7b7f062269bf49e2
Reviewed-on: https://go-review.googlesource.com/10376
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes for a more stable API for tools (including cmd/link itself) to
extract the abi hash from a shared library and makes it possible at all for a
library that has had the local symbol table removed.
The existing note-writing code only supports writing notes into the very start
of the object file so they are easy to find in core dumps. This doesn't apply
to the "go" notes and means that all notes have to fit into a fixed size
budget. That's annoying now we have more notes (and the next CL will add
another one) so this does a little bit of work to make adding notes that do not
have to go at the start of the file easier and moves the writing of the package
list note over to that mechanism, which lets me revert a hack that increased
the size budget mentioned above for -buildmode=shared builds.
Change-Id: I6077a68d395c8a2bc43dec8506e73c71ef77d9b9
Reviewed-on: https://go-review.googlesource.com/10375
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I8694ee5e5642c31815ae63cd414a3b1fcd9c95b0
Reviewed-on: https://go-review.googlesource.com/10411
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The LSym.Section and Section.Elfsect fields were defined as interface{} but
always had the same concrete type (*Section and *ElfShdr respectively) so just
define them with that type. Reduces size of LSym from 328 to 320 bytes and
reduces best-of-10 maxresident size from 246028k to 238036k when linking
libstd.so.
Change-Id: Ie7112c53e4c2c7ce5fe233b81372aa5633f572e8
Reviewed-on: https://go-review.googlesource.com/10410
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This allows objdump to disassemble gcc generated binaries on OS X 10.6.
Change-Id: I1a5bfbf7c252e78215ef1f122520689d5ce6ddca
Reviewed-on: https://go-review.googlesource.com/10383
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
At some point this code should probably move to cmd/link/internal/ld,
but at least for now just handle c-archive like c-shared.
Change-Id: Ic17656529cb0fe189a37f15e670350ab13bb5276
Reviewed-on: https://go-review.googlesource.com/10385
Reviewed-by: Andrew Gerrand <adg@golang.org>
- no "visible" change to spec but for updated date
- retired several outdated TODO items
- filed non-urgent issues 10953, 10954, 10955 for current TODOs
Change-Id: If87ad0fb546c6955a6d4b5801e06e5c7d5695ea2
Reviewed-on: https://go-review.googlesource.com/10382
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add the AddressParser type to allow decoding any charset in
mail addresses.
Fixes#7079
Change-Id: Ic34efb3e3d804a4e17149a6c38cfd73f5f275ab7
Reviewed-on: https://go-review.googlesource.com/10392
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The new lower-level barriers work fine and don't need special handling,
because they appear to the race detector as (visible) ordinary assignments.
Change-Id: I7477d73a3deecbebf68716580678c595cc4151e3
Reviewed-on: https://go-review.googlesource.com/10316
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It can be useful when debugging to be able to see what the external
linker is doing even when it succeeds. In particular this permits
passing -v to the external linker to see precisely what it is doing.
Change-Id: Ifed441912d97bbebea20303fdb899e140b380215
Reviewed-on: https://go-review.googlesource.com/10363
Reviewed-by: Minux Ma <minux@golang.org>
They will be compiled and added to the archive, just as though the
package used cgo. In effect all SWIG packages now use cgo anyhow.
Change-Id: I5d5a28ed0ec4295f24036b2834218bc980f080d0
Reviewed-on: https://go-review.googlesource.com/10146
Reviewed-by: Minux Ma <minux@golang.org>
Implement the changes from CL 10173 on OpenBSD.
Change-Id: I2db1cd8141fd392a34753a1b8113e2e0401173b9
Reviewed-on: https://go-review.googlesource.com/10342
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As mentioned in
http://gitweb.dragonflybsd.org/dragonfly.git/commit/727ccde8cce813911d885b7f6ed749dcea68a886,
DragonFly BSD is dropping support for IPv6 IPv4-mapped address.
Unfortunately, on some released versions we see the kernels pretend to
support the feature but actually not (unless tweaking some kernel states
via sysctl.)
To avoid unpredictable behavior, the net package assumes that all
DragonFly BSD kernels don't support IPv6 IPv4-mapped address.
Fixes#10764.
Change-Id: Ic7af3651e0372ec03774432fbb6b2eb0c455e994
Reviewed-on: https://go-review.googlesource.com/10071
Reviewed-by: Ian Lance Taylor <iant@golang.org>
