Fixes#36690.
Change-Id: Id4234ab9467270d51f0411375b71ece7f41269b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/215817
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
As of CL 175857, the client code checks for known round tripper
implementations, and uses simpler cancellation code when it finds one.
However, this code was not considering the case of a request that uses
a user-defined protocol, where the user-defined protocol was
registered with the transport to use a different round tripper.
The effect was that round trippers that worked with earlier
releases would not see the expected cancellation semantics with tip.
Fixes#36820
Change-Id: I60e75b5d0badcfb9fde9d73a966ba1d3f7aa42b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/216618
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test expects that open-coded defers are enabled, which is not currently
the case on riscv64.
Updates issue #27532 and #36786.
Change-Id: I94bb558c5b0734b4cfe5ae12873be81026009bcf
Reviewed-on: https://go-review.googlesource.com/c/go/+/216777
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change formalizes an assumption made by the page allocator, which
is that (*pageAlloc).searchAddr should never refer to memory that is not
represented by (*pageAlloc).inUse. The portion of address space covered
by (*pageAlloc).inUse reflects the parts of the summary arrays which are
guaranteed to mapped, and so looking at any summary which is not
reflected there may cause a segfault.
In fact, this can happen today. This change thus also removes a
micro-optimization which is the only case which may cause
(*pageAlloc).searchAddr to point outside of any region covered by
(*pageAlloc).inUse, and adds a test verifying that the current segfault
can no longer occur.
Change-Id: I98b534f0ffba8656d3bd6d782f6fc22549ddf1c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/216697
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
cryptobyte: fix panic due to malformed ASN.1 inputs on 32-bit archs
When int is 32 bits wide (on 32-bit architectures like 386 and arm), an
overflow could occur, causing a panic, due to malformed ASN.1 being
passed to any of the ASN1 methods of String.
Tested on linux/386 and darwin/amd64.
This fixes CVE-2020-7919 and was found thanks to the Project Wycheproof
test vectors.
Change-Id: I8c9696a8bfad1b40ec877cd740dba3467d66ab54
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/645211
Reviewed-by: Katie Hockman <katiehockman@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-on: https://go-review.googlesource.com/c/crypto/+/216677
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
x/crypto/cryptobyte is used in crypto/x509 for parsing certificates.
Malformed certificates might cause a panic during parsing on 32-bit
architectures (like arm and 386).
Change-Id: I840feb54eba880dbb96780ef7adcade073c4c4e3
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/647741
Reviewed-by: Katie Hockman <katiehockman@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/216680
Reviewed-by: Katie Hockman <katie@golang.org>
Open-coded defers are currently broken on riscv64 - disable them for the
time being. All of the standard package tests now pass on linux/riscv64.
Updates issue #27532 and #36786
Change-Id: I20fc25ce91dfad48be32409ba5c64ca9a6acef1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/216517
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On RISCV64, the U-instructions (AUIPC and LUI) take 20 bits, append 12 bits
of zeros and sign extend to 64-bits. As such, the 20 bit immediate value is
signed not unsigned.
Updates #27532
Change-Id: I725215a1dc500106dbfdc0a4425f3c0b2a6f411e
Reviewed-on: https://go-review.googlesource.com/c/go/+/216257
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Duplicate the register definitions and names to avoid importing the
cmd/internal/obj/riscv64 package. This makes it possible to build compiler rules
with a stable Go tool chain.
Fixes#36663
Change-Id: I09116a97bb037ca1bc00073306a82bb88862b1e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/216518
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Hopefully this won't affect many people, but it's a substantial change
in behavior for a specific case, so it's probably worth mentioning.
Updates #32027
Change-Id: I61cd50e93d0199e94b011cc90150e072b6bb10ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/216597
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On PPC64, MOVWload, MOVDload, and MOVDstore are assembled to a
"DS from" instruction which requiers the offset is a multiple of
4. Only fold offset to such instructions if it is a multiple of 4.
Fixes#36723.
"GOARCH=ppc64 GOOS=linux go build -gcflags=all=-d=ssa/check/on std cmd"
passes now.
Change-Id: I67f2a6ac02f0d33d470f68ff54936c289a4c765b
Reviewed-on: https://go-review.googlesource.com/c/go/+/216379
Reviewed-by: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
The public proxy and checksum database launched with Go 1.13 have been
running smoothly, pkg.go.dev is serving module-aware documentation,
and in 1.14 we have improved the vendoring workflow and finished
Subversion support to reach parity with GOPATH mode for users of those
features, updated documentation (including the “How to Write Go Code”
intro document) and published blog posts describing common modes of
usage, and improved the migration path for existing v2+ modules by
making version resolution less aggressive about "+incompatible" major
versions.
We (always) have more fit-and-finish work to do, but at this point we
believe that module mode will provide a better user experience than
GOPATH mode for most users, including in production use.
Change-Id: I897e0a43e3aebe4c90553c414337a46bfc9c2bef
Reviewed-on: https://go-review.googlesource.com/c/go/+/216317
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This disables some tests that are unsupported on riscv64 and adds support
for risc64 to test/nosplit.
Updates #27532, #36739 and #36765
Change-Id: I0a57797a05bc80236709fc240c0a0efb0ee0d16b
Reviewed-on: https://go-review.googlesource.com/c/go/+/216263
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test requires support for external linking, which does not currently
exist on linux/riscv64.
Updates #27532 and #36739
Change-Id: Ia0cdf69f1830b995f2882b47d1bc0be82c4b3039
Reviewed-on: https://go-review.googlesource.com/c/go/+/216259
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Manually cherry pick asm_linux_riscv64.s from x/sys/unix rev 4c3a92842,
as needed for the linux/riscv64 port.
Normally this would be a vendor update, however this is significantly
more risky at this point in time - a full update can be done post release.
Updates #27532
Change-Id: I03bb191bc44dcd24b9a29243957b88d7a9091852
Reviewed-on: https://go-review.googlesource.com/c/go/+/216260
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 7b294cdd8d, CL 182657.
Reason for revert: This change may be causing latency problems
for applications which call ReadMemStats, because it may cause
all goroutines to stop until the GC completes.
https://golang.org/cl/215157 fixes this problem, but it's too
late in the cycle to land that.
Updates #19812.
Change-Id: Iaa26f4dec9b06b9db2a771a44e45f58d0aa8f26d
Reviewed-on: https://go-review.googlesource.com/c/go/+/216358
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts commit 05511a5c0a, CL 208379.
Reason for revert: So that we can cleanly revert
https://golang.org/cl/182657.
Change-Id: I4fdf4f864a093db7866b3306f0f8f856b9f4d684
Reviewed-on: https://go-review.googlesource.com/c/go/+/216357
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Running the dwarf tests with CGO_CFLAGS set
with certain values would cause the test to fail. all.bash
would fail when CGO_CFLAGS was set to '-mmacosx-version-min=10.10'
because the --macosx-version-min flag is incompatible with some dwarf
tests. The change guards against using an unintended flag in the unit test.
Updates #35459
Change-Id: Idc9b354aba44fdab424cb0081a4b3ea7a6d0f8e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/216177
Run-TryBot: Carlos Amedee <carlos@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Regression tests for #24161 use a macro to conditionally compile some
stub definitions. The macro tests that the minimum macOS version is
less than 10.12.
We get duplicate definitions when building this test with
CGO_CFLAGS=-mmacosx-version-min=10.x where 10.x < 10.12. With this
change, we use a different macro, __MAC_OS_X_VERSION_MAX_ALLOWED__,
which tests the SDK version instead of the minimum macOS version. This
checks whether these definitions are present in headers.
After this change, 'go tool dist test cgo_test' should pass with
CGO_FLAGS=-mmacosx-version-min=10.10.
Updates #35459
Change-Id: I88d63601c94b0369c73c38d216a2d41ba7d4e579
Reviewed-on: https://go-review.googlesource.com/c/go/+/216243
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change the `itemChar` clause to be like all other clauses
that don't return a different state function than the default.
Change-Id: I56c863a7d699c1264b24b42ef23138ec47eaacd8
Reviewed-on: https://go-review.googlesource.com/c/go/+/216117
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
An attacker can trick the Windows system verifier to use a poisoned set
of elliptic curve parameters for a trusted root, allowing it to generate
spoofed signatures. When this happens, the returned chain will present
the unmodified original root, so the actual signatures won't verify (as
they are invalid for the correct parameters). Simply double check them
as a safety measure and mitigation.
Windows users should still install the system security patch ASAP.
This is the same mitigation adopted by Chromium:
https://chromium-review.googlesource.com/c/chromium/src/+/1994434
Change-Id: I2c734f6fb2cb51d906c7fd77034318ffeeb3e146
Reviewed-on: https://go-review.googlesource.com/c/go/+/215905
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ryan Sleevi <sleevi@google.com>
Reviewed-by: Katie Hockman <katie@golang.org>
Running the 'TestBuildForTvOS' test with CGO_CFLAGS set
with certain values would cause the test to fail. all.bash
would fail when CGO_CFLAGS was set to '-mmacosx-version-min=10.10'
because the --macosx-version-min flag is incompatible with tvOS.
The change guards against using an unintended flag in the unit test.
Updates #35459
Change-Id: Ifc43f3ebfb23d37aabeaac2ea9efae5b877991bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/215957
Run-TryBot: Carlos Amedee <carlos@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In reviewing CL 215940, it took me a while to find the control
condition for the test, which was located in build_cache_trimpath.txt.
We could consolidate the two tests, but since they check for
regressions of separate issues (with separate root-causes), I think it
makes sense to keep them separate.
However, I would like the control condition to be present in the same
source file, so that we'll be more likely to update both cases if the
behavior of one of them is changed.
Updates #36566
Change-Id: Ic588f1dfb7977dd78d1d5ef61b9841e22bad82e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/216018
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
With the command below, I was able to reproduce failures within the
first 50 or so runs:
go test -c -o test && stress -p 32 ./test -test.run Script/test_regexp
When printing the full failure output, we'd see:
BenchmarkX
BenchmarkX: x_test.go:13: LOG: X running N=1
BenchmarkX/Y
BenchmarkX/Y: x_test.go:15: LOG: Y running N=1
BenchmarkX/Y: x_test.go:15: LOG: Y running N=100
BenchmarkX/Y: x_test.go:15: LOG: Y running N=10000
BenchmarkX/Y: x_test.go:15: LOG: Y running N=1000000
BenchmarkX/Y: x_test.go:15: LOG: Y running N=100000000
BenchmarkX/Y: x_test.go:15: LOG: Y running N=1000000000
BenchmarkX/Y 1000000000 0.000050 ns/op
BenchmarkX/Y: x_test.go:15: LOG: Y running N=1
BenchmarkX/Y: x_test.go:15: LOG: Y running N=30
BenchmarkX/Y: x_test.go:15: LOG: Y running N=1207
BenchmarkX/Y: x_test.go:15: LOG: Y running N=120700
BenchmarkX/Y: x_test.go:15: LOG: Y running N=12070000
BenchmarkX/Y: x_test.go:15: LOG: Y running N=1000000000
BenchmarkX/Y 1000000000 0.000715 ns/op
In other words, the N values aren't required to be exact. It seems like
they are cut short if the machine is under stress. That's the exact
scenario we reproduce above, since I used -p=32 on my laptop with only 4
real CPU cores.
First, don't require each line to be present. Instead, use patterns
that span multiple lines, so that we can just match the first and last
N= lines.
Second, don't require the last N= lines to be exact; simply require
them to have a reasonably large number of digits.
Fixes#36664.
Change-Id: I7a9818f1a07099fa6482a26da2ac5cbea0f8ab30
Reviewed-on: https://go-review.googlesource.com/c/go/+/215578
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a package has a module with a version, the package's directory is
replaced with the module path and version, followed by the package's
path within the module.
This is a follow up to CL 214945. We no longer check whether the
module has a directory (with -mod=vendor, it does not).
Updates #36566
Change-Id: I5bc952b13bc7b4659f58ee555bd6c6a087eb7792
Reviewed-on: https://go-review.googlesource.com/c/go/+/215940
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
While this instruction is not needed for the relocation (the lower immediate
can be patched directly into the JALR instruction), other code currently
depends on the jump sequence being 12 bytes (or three instructions) long.
Put the ADDI instruction back until these can be found and fixed.
Updates #27532
Change-Id: Idb73d716be8eb2eb796591b30f1ec4dc104f2bf8
Reviewed-on: https://go-review.googlesource.com/c/go/+/215840
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit e6c12c3d02.
Reason for revert: the assumption that a T-E of "gzip" implies
"chunked" seems incorrect. The RFC does state that one "MUST apply
chunked as the final transfer coding" but that should be interpreted to
mean that a "chunked" encoding must be listed as the last one, not that
one should be assumed to be there if not. This is confirmed by the
alternative option to chunking on the server side being to "terminate
the message by closing the connection".
The issue seems confirmed by the fact that the code in the body of
#29162 fails with the following error:
net/http: HTTP/1.x transport connection broken: http: failed to gunzip body: unexpected EOF
This late in the cycle, revert rather than fix, also because we don't
apparently have tests for the correct behavior.
Change-Id: I920ec928754cd8e96a06fb7ff8a53316c0f959e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/215757
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Unlike C's memmove, Go's memmove must be careful to do indivisible
writes of pointer values because it may be racing with the garbage
collector reading the heap.
We've had various bugs related to this over the years (#36101, #13160,
#12552). Indeed, memmove is a great target for optimization and it's
easy to forget the special requirements of Go's memmove.
The CL documents these (currently unwritten!) requirements. We're also
adding a test that should hopefully keep everyone honest going
forward, though it's hard to be sure we're hitting all cases of
memmove.
Change-Id: I2f59f8d8d6fb42d2f10006b55d605b5efd8ddc24
Reviewed-on: https://go-review.googlesource.com/c/go/+/213418
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The timers code used to have a problem: if code started and stopped a
lot of timers, as would happen with, for example, lots of calls to
context.WithTimeout, then it would steadily use memory holding timers
that had stopped but not been removed from the timer heap.
That problem was fixed by CL 214299, which would remove all deleted
timers whenever they got to be more than 1/4 of the total number of
timers on the heap.
The timers code had a different problem: if there were some idle P's,
the running P's would have lock contention trying to steal their timers.
That problem was fixed by CL 214185, which only acquired the timer lock
if the next timer was ready to run or there were some timers to adjust.
Unfortunately, CL 214185 partially undid 214299, in that we could now
accumulate an increasing number of deleted timers while there were no
timers ready to run. This CL restores the 214299 behavior, by checking
whether there are lots of deleted timers without acquiring the lock.
This is a performance issue to consider for the 1.14 release.
Change-Id: I13c980efdcc2a46eb84882750c39e3f7c5b2e7c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/215722
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
'go get all' was run in this test without -d. This caused some std
packages to be reinstalled if the test is run in a slightly different
configuration than make.bash was run. run.bash would fail in some
situations because of this. Nothing in the cmd/go tests should modify
installed std or cmd packages.
Updates #35459
Change-Id: Idd259a27d55502923b7fc54f361a77f0ac11eea2
Reviewed-on: https://go-review.googlesource.com/c/go/+/215721
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The FLW/FLD/FSW/FSD instructions can have immediates that exceed 12-bits and
therefore cannot be encoded in the RISCV instruction. Handle these as we do
for other load/store instructions. Also add test coverage for all load/store
instructions with large immediates.
Fixes compilation issue reported by Carlos Eduardo de Paula.
Updates #27532
Change-Id: Ifa62f19493b3acaba5a90ac31d2df209a3afea81
Reviewed-on: https://go-review.googlesource.com/c/go/+/215037
Reviewed-by: Carlos Eduardo de Paula <me@carlosedp.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
ReverseProxy automatically sets the X-Forwarded-For header, if the request
already contains a X-Forwarded-For header, the value of the client IP is
appended to the existing header value.
This behavior isn't documented anywhere, and can lead to IP spoofing
security issues is the client is untrusted (the most common situation).
This PR documents this behavior.
For future versions, I proposed #36678 that implements a more secure
default behavior and adds support for other forwarded headers.
Change-Id: Ief14f5063caebfccb87714f54cffa927c714e5fd
GitHub-Last-Rev: fd0bd29a18
GitHub-Pull-Request: golang/go#36672
Reviewed-on: https://go-review.googlesource.com/c/go/+/215617
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
