These find approximately nothing.
Takes 5% off my all.bash run time.
For #10571.
Change-Id: I21d3a844af756eb37f59bba0064f24995626da0d
Reviewed-on: https://go-review.googlesource.com/18198
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Takes 15% off my all.bash run time
(after this and earlier CLs, now down to 3½ from 5½ minutes).
For #10571.
Change-Id: Iac316ffb730c9ff0a0faa7cc3b82ed4f7e6d4361
Reviewed-on: https://go-review.googlesource.com/18088
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly we just care that the test binaries link and start up.
No need to run the full test suites.
Takes 12% off my all.bash run time.
For #10571.
Change-Id: I01af618f3d51deb841ea638424e1389a2df7d746
Reviewed-on: https://go-review.googlesource.com/18086
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Takes 3% off my all.bash run time.
For #10571.
Change-Id: I8f00f523d6919e87182d35722a669b0b96b8218b
Reviewed-on: https://go-review.googlesource.com/18087
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I'm tired of having to remember it on every command.
Rebuilding everything is the wrong default.
This CL updates the build script, but the builders may
(or may not) need work, depending on whether they
rebuild using the test command (I doubt it).
Change-Id: I21f202a2f13e73df3f6bd54ae6a317c467b68151
Reviewed-on: https://go-review.googlesource.com/18084
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently goroutineheader goes through some convolutions to *almost*
print the scan state of a G. However, the code path that would print
the scan state of the G refers to gStatusStrings where it almost
certainly meant to refer to gScanStatusStrings (which is unused), so
it winds up printing the regular status string without the scan state
either way. Furthermore, if the G is in _Gwaiting, we override the
status string and lose where this would indicate the scan state if it
worked.
This commit fixes this so the runtime prints the scan state. However,
rather than using a parallel list of status strings, this simply adds
a conditional print if the scan bit is set. This lets us remove the
string list, prints the scan state even in _Gwaiting, and lets us
strip off the scan bit at the beginning of the function, which
simplifies the rest of it.
Change-Id: Ic0adbe5c05abf4adda93da59f93b578172b28e3d
Reviewed-on: https://go-review.googlesource.com/18092
Reviewed-by: Keith Randall <khr@golang.org>
If non-Go code calls sigaltstack before a signal is received, use
sigaltstack to determine the current signal stack and set the gsignal
stack to use it. This makes the Go runtime more robust in the face of
non-Go code. We still can't handle a disabled signal stack or a signal
triggered with SA_ONSTACK clear, but we now give clear errors for those
cases.
Fixes#7227.
Update #9896.
Change-Id: Icb1607e01fd6461019b6d77d940e59b3aed4d258
Reviewed-on: https://go-review.googlesource.com/18102
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
This makes NYCbCrA consistent with YCbCr.
Fixes#13706.
Change-Id: Ifced84372e4865925fa6efef9ca2f1de43da70e0
Reviewed-on: https://go-review.googlesource.com/18115
Reviewed-by: Rob Pike <r@golang.org>
s/encrypt/decrypt/
The text is unsafe to cut and paste...
Change-Id: Iab19ddf8182d087e9a4b4d34a9eeabd1d2aa02d6
Reviewed-on: https://go-review.googlesource.com/18104
Reviewed-by: Rob Pike <r@golang.org>
Give a link to the wikipedia page describing the mechanism and
explain better how to use the same buffer for input and output.
Change-Id: If6dfd6cf9c6dff0517cb715f60a11349dbdd91e0
Reviewed-on: https://go-review.googlesource.com/18103
Reviewed-by: Russ Cox <rsc@golang.org>
This change replaces the existing log format separated by commas and
spaces with space-separated one.
Change-Id: I9a4b38669025430190c9a1a6b5c82b862866559d
Reviewed-on: https://go-review.googlesource.com/17999
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In general the package net deals IPv4 addresses as IPv6 IPv4-mapped
addresses internally for the dual stack era, when we need to support
various techniques on IPv4/IPv6 translation.
This change makes windows implementation follow the same pattern which
BSD variants and Linux do.
Updates #13544.
Also fixes an unintentionally formatted line by accident by gofmt.
Change-Id: I4953796e751fd8050c73094468a0d7b0d33f5516
Reviewed-on: https://go-review.googlesource.com/17992
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Only install signal handlers for synchronous signals that become
run-time panics. Set the SA_ONSTACK flag for other signal handlers as
needed.
Fixes#13028.
Update #12465.
Update #13034.
Update #13042.
Change-Id: I28375e70641f60630e10f3c86e24b6e4f8a35cc9
Reviewed-on: https://go-review.googlesource.com/17903
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It turns out that the second argument for sigaction on Darwin has a
different type than the first argument. The second argument is the user
visible sigaction struct, and does not have the sa_tramp field.
I base this on
http://www.opensource.apple.com/source/Libc/Libc-1081.1.3/sys/sigaction.c
not to mention actual testing.
While I was at it I removed a useless memclr in setsig, a relic of the C
code.
This CL is Darwin-specific changes. The tests for this CL are in
https://golang.org/cl/17903 .
Change-Id: I61fe305c72311df6a589b49ad7b6e49b6960ca24
Reviewed-on: https://go-review.googlesource.com/18015
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Programs that call panic to crash after detecting a serious problem
may wish to use SetTraceback to force printing of all goroutines first.
Change-Id: Ib23ad9336f405485aabb642ca73f454a14c8baf3
Reviewed-on: https://go-review.googlesource.com/18043
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This future-proofs the Chdr64 structure against later versions of ELF
defining this field and declutters the documentation without changing
the layout of the struct.
This structure does not exist in the current release, so this change
is safe.
Change-Id: I239aad7243ddaf063a1f8cd521d8a50b30413281
Reviewed-on: https://go-review.googlesource.com/18028
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Copy the same sentence from Transport.TLSNextProto.
Change-Id: Ib67bf054e891a68be8ba466a8c52968363374d16
Reviewed-on: https://go-review.googlesource.com/18031
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, if sigprof determines that the G is in user code (not cgo
or libcall code), it will only traceback the G stack if it can acquire
the stack barrier lock. However, it has no such restriction if the G
is in cgo or libcall code. Because cgo calls count as syscalls, stack
scanning and stack barrier installation can occur during a cgo call,
which means sigprof could attempt to traceback a G in a cgo call while
scanstack is installing stack barriers in that G's stack. As a result,
the following sequence of events can cause the sigprof traceback to
panic with "missed stack barrier":
1. M1: G1 performs a Cgo call (which, on Windows, is any system call,
which could explain why this is easier to reproduce on Windows).
2. M1: The Cgo call puts G1 into _Gsyscall state.
3. M2: GC starts a scan of G1's stack. It puts G1 in to _Gscansyscall
and acquires the stack barrier lock.
4. M3: A profiling signal comes in. On Windows this is a global
(though I don't think this matters), so the runtime stops M1 and
calls sigprof for G1.
5. M3: sigprof fails to acquire the stack barrier lock (because the
GC's stack scan holds it).
6. M3: sigprof observes that G1 is in a Cgo call, so it calls
gentraceback on G1 with its Cgo transition point.
7. M3: gentraceback on G1 grabs the currently empty g.stkbar slice.
8. M2: GC finishes scanning G1's stack and installing stack barriers.
9. M3: gentraceback encounters one of the just-installed stack
barriers and panics.
This commit fixes this by only allowing cgo tracebacks if sigprof can
acquire the stack barrier lock, just like in the regular user
traceback case.
For good measure, we put the same constraint on libcall tracebacks.
This case is probably already safe because, unlike cgo calls, libcalls
leave the G in _Grunning and prevent reaching a safe point, so
scanstack cannot run during a libcall. However, this also means that
sigprof will always acquire the stack barrier lock without contention,
so there's no cost to adding this constraint to libcall tracebacks.
Fixes#12528. For 1.5.3 (will require some backporting).
Change-Id: Ia5a4b8e3d66b23b02ffcd54c6315c81055c0cec2
Reviewed-on: https://go-review.googlesource.com/18023
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, setNextBarrierPC manipulates the stack barriers without
acquiring the stack barrier lock. This is mostly okay because
setNextBarrierPC also runs synchronously on the G and prevents safe
points, but this doesn't prevent a sigprof from occurring during a
setNextBarrierPC and performing a traceback.
Given that setNextBarrierPC simply sets one entry in the stack barrier
array, this is almost certainly safe in reality. However, given that
this depends on a subtle argument, which may not hold in the future,
and that setNextBarrierPC almost never happens, making it nowhere near
performance-critical, we can simply acquire the stack barrier lock and
be sure that the synchronization will work.
Updates #12528. For 1.5.3.
Change-Id: Ife696e10d969f190157eb1cbe762a2de2ebce079
Reviewed-on: https://go-review.googlesource.com/18022
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Update docs on ResponseWriter and Handler around concurrency.
Also add a test.
The Handler docs were old and used "object" a lot. It was also too
ServeMux-centric.
Fixes#13050
Updates #13659 (new issue found in http2 while writing the test)
Change-Id: I25f53d5fa54f1c9d579d3d0f191bf3d94b1a251b
Reviewed-on: https://go-review.googlesource.com/17982
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The test for non-package main top-level inputs is done while parsing
the export data. Issue #13468 happened because we were not parsing
the export data when using compiler-generated archives
(that is, when using go tool compile -pack).
Fix this by parsing the export data even for archives.
However, that turns up a different problem: the export data check
reports (one assumes spurious) skew errors now, because it has
not been run since Go 1.2.
(Go 1.3 was the first release to use go tool compile -pack.)
Since the code hasn't run since Go 1.2, it can't be that important.
Since it doesn't work today, just delete it.
Figuring out how to make this code work with Robert's export
format was one of the largest remaining TODOs for that format.
Now we don't have to.
Fixes#13468 and makes the world a better place.
Change-Id: I40a4b284cf140d49d48b714bd80762d6889acdb9
Reviewed-on: https://go-review.googlesource.com/17976
Reviewed-by: Robert Griesemer <gri@golang.org>
Since we allow non-200 responses from HTTPS in normal operation,
it seems odd to reject them in -insecure operation.
Fixes#13037 (again).
Change-Id: Ie232f7544ab192addfad407525888db6b967befe
Reviewed-on: https://go-review.googlesource.com/17945
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The change here is to move the closeBody call into the if block.
The logging adjustments are just arranging to tell the truth:
in particular if we're not in insecure mode and we get a non-200
error then we do not actually ignore the response
(except as caused by closing the body incorrectly).
As the comment below the change indicates, it is intentional that
we process non-200 pages. The code does process them, because
the if err != nil || status != 200 block does not return.
But that block does close the body, which depending on timing
can apparently poison the later read from the body.
See #13037's initial report:
$ go get -v bosun.org/cmd/bosun/cache
Fetching https://bosun.org/cmd/bosun/cache?go-get=1
ignoring https fetch with status code 404
Parsing meta tags from https://bosun.org/cmd/bosun/cache?go-get=1 (status code 404)
import "bosun.org/cmd/bosun/cache": parsing bosun.org/cmd/bosun/cache: http: read on closed response body
package bosun.org/cmd/bosun/cache: unrecognized import path "bosun.org/cmd/bosun/cache"
The log print about ignoring the https fetch is not strictly true,
since the next thing that happened was parsing the body of that fetch.
But the read on the closed response body failed during parsing.
Moving the closeBody to happen only when we're about to discard the
result and start over (that is, only in -insecure mode) fixes the parse.
At least it should fix the parse. I can't seem to break the parse anymore,
because of #13648 (close not barring future reads anymore),
but this way is clearly better than the old way. If nothing else the old code
closed the body twice when err != nil and -insecure was not given.
Fixes#13037.
Change-Id: Idf57eceb6d5518341a2f7f75eb8f8ab27ed4e0b4
Reviewed-on: https://go-review.googlesource.com/17944
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This caused #13657.
Reverting fixes#13657.
I was trying to be helpful by fixing #12313,
but I don't need the fix myself.
Will leave for someone with more motivation.
This reverts commit 3e9f063670.
Change-Id: Ifc78a6196f23e0f58e3b9ad7340e207a2d5de0a6
Reviewed-on: https://go-review.googlesource.com/17977
Reviewed-by: Russ Cox <rsc@golang.org>
