In preparation for OEMPTY being its own Node implementation,
remove SetOp(OEMPTY) calls that assume other implementations
can be turned into OEMPTY.
Passes buildall w/ toolstash -cmp.
Change-Id: Icac16d12548f35f52a5efa9d09dacf8260f42075
Reviewed-on: https://go-review.googlesource.com/c/go/+/274090
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are only needed for a few opcodes, and we can avoid
wasting storage in every implementation by using the extension
interface pattern with a helper function for access.
Of course, in the current codebase, there is only one Node
implementation (*node) and it has these methods, so there
is no danger of a functional change in this particular CL.
Passes buildall w/ toolstash -cmp.
Change-Id: I440c6c232f1fe7b56b852a00dc530f8f49a6b12d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274089
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Start a list of which ops are valid for the default
node struct implementation (currently all of them).
Add a Node implementation helper for a minimal node.
Passes buildall w/ toolstash -cmp.
Change-Id: I7ae45f2cf2be85013cb71ab00524be53f243e13d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274088
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Node.HasOpt is only used once, and that use can use Opt instead.
Interface is one method smaller.
Passes buildall w/ toolstash -cmp.
Change-Id: I6a9d5859a9977a8f4c9db70e166f50f0d8052160
Reviewed-on: https://go-review.googlesource.com/c/go/+/274087
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- The use of a label's Name.Defn to point at the named for/select/switch
means that any rewrite of the for/select/switch must overwrite the original
or else the pointer will dangle. Remove that pointer by adding the label
name directly to the for/select/switch representation instead.
- The only uses of a label's Sym.Label were ephemeral values during
markbreak and escape analysis. Use a map for each. Although in general
we are not going to replace all computed fields with maps (too slow),
the one in markbreak is only for labeled for/select/switch, and the one
in escape is for all labels, but even so, labels are fairly rare.
In theory this cleanup should make it easy to allow labeled for/select/switch
in inlined bodies, but this CL does not attempt that. It's only concerned
with cleanup to enable a new Node representation.
Passes buildall w/ toolstash -cmp.
Change-Id: I7e36ee98d2ea40dbae94e6722d585f007b7afcfa
Reviewed-on: https://go-review.googlesource.com/c/go/+/274086
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In CL 145200, I changed OBREAK, OCONTINUE, OGOTO, and OLABEL to just
use Sym instead of Node. However, within the export data, I forgot to
update the code for OBREAK and OCONTINUE.
This isn't currently an issue because the inliner currently disallows
these anyway, but it'll be an issue in the future once we add support
for inlining them. Also, Russ independently ran into it in CL 273246.
Updates #14768.
Change-Id: I94575df59c08a750b0dce1d3ce612aba7bfeeb76
Reviewed-on: https://go-review.googlesource.com/c/go/+/273270
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Many of the standard library changes that were added before CL 272871
ended up in the "Core library" section. That section is meant for
major changes like new packages, and most of these aren't.
Consolidate all changes in the "Minor changes to the library" section
for now, so that it's easier to get a complete picture of changes for
each package, along with the remaining TODOs. Add a TODO to read them
over at the end and factor out items that are worth highlighting.
Apply minor other fixups to improve consistency.
For #40700.
Change-Id: I7dc2e7ebf2ea3385fce0c207bae4ce467998a717
Reviewed-on: https://go-review.googlesource.com/c/go/+/273267
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes the android/arm builder. Without it, the builder reported
unexpected stale targets during bootstrap:
https://build.golang.org/log/b951f1171be54cf4a12c2a0720ffaf07f8a11377
Tighten the GOARM=7 default in cmd/internal/objabi while here.
Change-Id: I944744910193e72e91bc37b5bf0783076b45e579
Reviewed-on: https://go-review.googlesource.com/c/go/+/273167
Run-TryBot: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Elias Naur <mail@eliasnaur.com>
The plan is to introduce a Node interface that replaces the old *Node pointer-to-struct.
The previous CL defined an interface INode modeling a *Node.
This CL:
- Changes all references outside internal/ir to use INode,
along with many references inside internal/ir as well.
- Renames Node to node.
- Renames INode to Node
So now ir.Node is an interface implemented by *ir.node, which is otherwise inaccessible,
and the code outside package ir is now (clearly) using only the interface.
The usual rule is never to redefine an existing name with a new meaning,
so that old code that hasn't been updated gets a "unknown name" error
instead of more mysterious errors or silent misbehavior. That rule would
caution against replacing Node-the-struct with Node-the-interface,
as in this CL, because code that says *Node would now be using a pointer
to an interface. But this CL is being landed at the same time as another that
moves Node from gc to ir. So the net effect is to replace *gc.Node with ir.Node,
which does follow the rule: any lingering references to gc.Node will be told
it's gone, not silently start using pointers to interfaces. So the rule is followed
by the CL sequence, just not this specific CL.
Overall, the loss of inlining caused by using interfaces cuts the compiler speed
by about 6%, a not insignificant amount. However, as we convert the representation
to concrete structs that are not the giant Node over the next weeks, that speed
should come back as more of the compiler starts operating directly on concrete types
and the memory taken up by the graph of Nodes drops due to the more precise
structs. Honestly, I was expecting worse.
% benchstat bench.old bench.new
name old time/op new time/op delta
Template 168ms ± 4% 182ms ± 2% +8.34% (p=0.000 n=9+9)
Unicode 72.2ms ±10% 82.5ms ± 6% +14.38% (p=0.000 n=9+9)
GoTypes 563ms ± 8% 598ms ± 2% +6.14% (p=0.006 n=9+9)
Compiler 2.89s ± 4% 3.04s ± 2% +5.37% (p=0.000 n=10+9)
SSA 6.45s ± 4% 7.25s ± 5% +12.41% (p=0.000 n=9+10)
Flate 105ms ± 2% 115ms ± 1% +9.66% (p=0.000 n=10+8)
GoParser 144ms ±10% 152ms ± 2% +5.79% (p=0.011 n=9+8)
Reflect 345ms ± 9% 370ms ± 4% +7.28% (p=0.001 n=10+9)
Tar 149ms ± 9% 161ms ± 5% +8.05% (p=0.001 n=10+9)
XML 190ms ± 3% 209ms ± 2% +9.54% (p=0.000 n=9+8)
LinkCompiler 327ms ± 2% 325ms ± 2% ~ (p=0.382 n=8+8)
ExternalLinkCompiler 1.77s ± 4% 1.73s ± 6% ~ (p=0.113 n=9+10)
LinkWithoutDebugCompiler 214ms ± 4% 211ms ± 2% ~ (p=0.360 n=10+8)
StdCmd 14.8s ± 3% 15.9s ± 1% +6.98% (p=0.000 n=10+9)
[Geo mean] 480ms 510ms +6.31%
name old user-time/op new user-time/op delta
Template 223ms ± 3% 237ms ± 3% +6.16% (p=0.000 n=9+10)
Unicode 103ms ± 6% 113ms ± 3% +9.53% (p=0.000 n=9+9)
GoTypes 758ms ± 8% 800ms ± 2% +5.55% (p=0.003 n=10+9)
Compiler 3.95s ± 2% 4.12s ± 2% +4.34% (p=0.000 n=10+9)
SSA 9.43s ± 1% 9.74s ± 4% +3.25% (p=0.000 n=8+10)
Flate 132ms ± 2% 141ms ± 2% +6.89% (p=0.000 n=9+9)
GoParser 177ms ± 9% 183ms ± 4% ~ (p=0.050 n=9+9)
Reflect 467ms ±10% 495ms ± 7% +6.17% (p=0.029 n=10+10)
Tar 183ms ± 9% 197ms ± 5% +7.92% (p=0.001 n=10+10)
XML 249ms ± 5% 268ms ± 4% +7.82% (p=0.000 n=10+9)
LinkCompiler 544ms ± 5% 544ms ± 6% ~ (p=0.863 n=9+9)
ExternalLinkCompiler 1.79s ± 4% 1.75s ± 6% ~ (p=0.075 n=10+10)
LinkWithoutDebugCompiler 248ms ± 6% 246ms ± 2% ~ (p=0.965 n=10+8)
[Geo mean] 483ms 504ms +4.41%
[git-generate]
cd src/cmd/compile/internal/ir
: # We need to do the conversion in multiple steps, so we introduce
: # a temporary type alias that will start out meaning the pointer-to-struct
: # and then change to mean the interface.
rf '
mv Node OldNode
add node.go \
type Node = *OldNode
'
: # It should work to do this ex in ir, but it misses test files, due to a bug in rf.
: # Run the command in gc to handle gc's tests, and then again in ssa for ssa's tests.
cd ../gc
rf '
ex . ../arm ../riscv64 ../arm64 ../mips64 ../ppc64 ../mips ../wasm {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
cd ../ssa
rf '
ex {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
: # Back in ir, finish conversion clumsily with sed,
: # because type checking and circular aliases do not mix.
cd ../ir
sed -i '' '
/type Node = \*OldNode/d
s/\*OldNode/Node/g
s/^func (n Node)/func (n *OldNode)/
s/OldNode/node/g
s/type INode interface/type Node interface/
s/var _ INode = (Node)(nil)/var _ Node = (*node)(nil)/
' *.go
gofmt -w *.go
sed -i '' '
s/{Func{}, 136, 248}/{Func{}, 152, 280}/
s/{Name{}, 32, 56}/{Name{}, 44, 80}/
s/{Param{}, 24, 48}/{Param{}, 44, 88}/
s/{node{}, 76, 128}/{node{}, 88, 152}/
' sizeof_test.go
cd ../ssa
sed -i '' '
s/{LocalSlot{}, 28, 40}/{LocalSlot{}, 32, 48}/
' sizeof_test.go
cd ../gc
sed -i '' 's/\*ir.Node/ir.Node/' mkbuiltin.go
cd ../../../..
go install std cmd
cd cmd/compile
go test -u || go test -u
Change-Id: I196bbe3b648e4701662e4a2bada40bf155e2a553
Reviewed-on: https://go-review.googlesource.com/c/go/+/272935
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Define the interface for an IR node.
The next CL will shuffle the names and leave us with ir.Node being the interface.
Change-Id: Ifc40f7846d522cf99efa6b4e558bebb6db5218f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/272934
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The pointer hack was nice and saved a word, but it's untenable
in a world where nodes are themselves interfaces with different
underlying types. Bite the bullet and use an interface to hold the
Node when in types.Sym and types.Type.
This has the nice benefit of removing AsTypesNode entirely.
AsNode is still useful because of its nil handling.
Change-Id: I298cba9ff788b956ee287283bec78010e8b601e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/272933
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are trivial rewrites that are only OK because it turns out that n has no side effects.
Separated into a different CL for easy inspection.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
ex . ../ir ../ssa {
import "cmd/compile/internal/ir"
var n *ir.Node
var i int64
n.Xoffset++ -> n.Xoffset = n.Xoffset + 1
n.Xoffset-- -> n.Xoffset = n.Xoffset - 1
n.Xoffset += i -> n.Xoffset = n.Xoffset + i
n.Xoffset -= i -> n.Xoffset = n.Xoffset - i
}
'
Change-Id: If7b4b7f7cbdafeee988e04d03924ef0e1dd867b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/272932
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The cycle hacks existed because gc needed to import ssa
which need to know about gc.Node. But now that's ir.Node,
and there's no cycle anymore.
Don't know how much it matters but LocalSlot is now
one word shorter than before, because it holds a pointer
instead of an interface for the *Node. That won't last long.
Now that they're not necessary for interface satisfaction,
IsSynthetic and IsAutoTmp can move to top-level ir functions.
Change-Id: Ie511e93466cfa2b17d9a91afc4bd8d53fdb80453
Reviewed-on: https://go-review.googlesource.com/c/go/+/272931
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we want to break up package gc at all, we will need to move
the compiler IR it defines into a separate package that can be
imported by packages that gc itself imports. This CL does that.
It also removes the TINT8 etc aliases so that all code is clear
about which package things are coming from.
This CL is automatically generated by the script below.
See the comments in the script for details about the changes.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
# These names were never fully qualified
# when the types package was added.
# Do it now, to avoid confusion about where they live.
inline -rm \
Txxx \
TINT8 \
TUINT8 \
TINT16 \
TUINT16 \
TINT32 \
TUINT32 \
TINT64 \
TUINT64 \
TINT \
TUINT \
TUINTPTR \
TCOMPLEX64 \
TCOMPLEX128 \
TFLOAT32 \
TFLOAT64 \
TBOOL \
TPTR \
TFUNC \
TSLICE \
TARRAY \
TSTRUCT \
TCHAN \
TMAP \
TINTER \
TFORW \
TANY \
TSTRING \
TUNSAFEPTR \
TIDEAL \
TNIL \
TBLANK \
TFUNCARGS \
TCHANARGS \
NTYPE \
BADWIDTH
# esc.go and escape.go do not need to be split.
# Append esc.go onto the end of escape.go.
mv esc.go escape.go
# Pull out the type format installation from func Main,
# so it can be carried into package ir.
mv Main:/Sconv.=/-0,/TypeLinkSym/-1 InstallTypeFormats
# Names that need to be exported for use by code left in gc.
mv Isconst IsConst
mv asNode AsNode
mv asNodes AsNodes
mv asTypesNode AsTypesNode
mv basicnames BasicTypeNames
mv builtinpkg BuiltinPkg
mv consttype ConstType
mv dumplist DumpList
mv fdumplist FDumpList
mv fmtMode FmtMode
mv goopnames OpNames
mv inspect Inspect
mv inspectList InspectList
mv localpkg LocalPkg
mv nblank BlankNode
mv numImport NumImport
mv opprec OpPrec
mv origSym OrigSym
mv stmtwithinit StmtWithInit
mv dump DumpAny
mv fdump FDumpAny
mv nod Nod
mv nodl NodAt
mv newname NewName
mv newnamel NewNameAt
mv assertRepresents AssertValidTypeForConst
mv represents ValidTypeForConst
mv nodlit NewLiteral
# Types and fields that need to be exported for use by gc.
mv nowritebarrierrecCallSym SymAndPos
mv SymAndPos.lineno SymAndPos.Pos
mv SymAndPos.target SymAndPos.Sym
mv Func.lsym Func.LSym
mv Func.setWBPos Func.SetWBPos
mv Func.numReturns Func.NumReturns
mv Func.numDefers Func.NumDefers
mv Func.nwbrCalls Func.NWBRCalls
# initLSym is an algorithm left behind in gc,
# not an operation on Func itself.
mv Func.initLSym initLSym
mv nodeQueue NodeQueue
mv NodeQueue.empty NodeQueue.Empty
mv NodeQueue.popLeft NodeQueue.PopLeft
mv NodeQueue.pushRight NodeQueue.PushRight
# Many methods on Node are actually algorithms that
# would apply to any node implementation.
# Those become plain functions.
mv Node.funcname FuncName
mv Node.isBlank IsBlank
mv Node.isGoConst isGoConst
mv Node.isNil IsNil
mv Node.isParamHeapCopy isParamHeapCopy
mv Node.isParamStackCopy isParamStackCopy
mv Node.isSimpleName isSimpleName
mv Node.mayBeShared MayBeShared
mv Node.pkgFuncName PkgFuncName
mv Node.backingArrayPtrLen backingArrayPtrLen
mv Node.isterminating isTermNode
mv Node.labeledControl labeledControl
mv Nodes.isterminating isTermNodes
mv Nodes.sigerr fmtSignature
mv Node.MethodName methodExprName
mv Node.MethodFunc methodExprFunc
mv Node.IsMethod IsMethod
# Every node will need to implement RawCopy;
# Copy and SepCopy algorithms will use it.
mv Node.rawcopy Node.RawCopy
mv Node.copy Copy
mv Node.sepcopy SepCopy
# Extract Node.Format method body into func FmtNode,
# but leave method wrapper behind.
mv Node.Format:0,$ FmtNode
# Formatting helpers that will apply to all node implementations.
mv Node.Line Line
mv Node.exprfmt exprFmt
mv Node.jconv jconvFmt
mv Node.modeString modeString
mv Node.nconv nconvFmt
mv Node.nodedump nodeDumpFmt
mv Node.nodefmt nodeFmt
mv Node.stmtfmt stmtFmt
# Constant support needed for code moving to ir.
mv okforconst OKForConst
mv vconv FmtConst
mv int64Val Int64Val
mv float64Val Float64Val
mv Node.ValueInterface ConstValue
# Organize code into files.
mv LocalPkg BuiltinPkg ir.go
mv NumImport InstallTypeFormats Line fmt.go
mv syntax.go Nod NodAt NewNameAt Class Pxxx PragmaFlag Nointerface SymAndPos \
AsNode AsTypesNode BlankNode OrigSym \
Node.SliceBounds Node.SetSliceBounds Op.IsSlice3 \
IsConst Node.Int64Val Node.CanInt64 Node.Uint64Val Node.BoolVal Node.StringVal \
Node.RawCopy SepCopy Copy \
IsNil IsBlank IsMethod \
Node.Typ Node.StorageClass node.go
mv ConstType ConstValue Int64Val Float64Val AssertValidTypeForConst ValidTypeForConst NewLiteral idealType OKForConst val.go
# Move files to new ir package.
mv bitset.go class_string.go dump.go fmt.go \
ir.go node.go op_string.go val.go \
sizeof_test.go cmd/compile/internal/ir
'
: # fix mkbuiltin.go to generate the changes made to builtin.go during rf
sed -i '' '
s/\[T/[types.T/g
s/\*Node/*ir.Node/g
/internal\/types/c \
fmt.Fprintln(&b, `import (`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/ir"`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/types"`) \
fmt.Fprintln(&b, `)`)
' mkbuiltin.go
gofmt -w mkbuiltin.go
: # update cmd/dist to add internal/ir
cd ../../../dist
sed -i '' '/compile.internal.gc/a\
"cmd/compile/internal/ir",
' buildtool.go
gofmt -w buildtool.go
: # update cmd/compile TestFormats
cd ../..
go install std cmd
cd cmd/compile
go test -u || go test # first one updates but fails; second passes
Change-Id: I5f7caf6b20629b51970279e81231a3574d5b51db
Reviewed-on: https://go-review.googlesource.com/c/go/+/273008
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It needs to move into package ir, and we do not want all the rest.
Change-Id: Ibcfa1ebc0e63fe3659267bf2fa7069e8a93de4e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/272930
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Move Flag, Debug, Ctxt, Exit, and error messages to
new package cmd/compile/internal/base.
These are the core functionality that everything in gc uses
and which otherwise prevent splitting any other code
out of gc into different packages.
A minor milestone: the compiler source code
no longer contains the string "yy".
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv atExit AtExit
mv Ctxt atExitFuncs AtExit Exit base.go
mv lineno Pos
mv linestr FmtPos
mv flusherrors FlushErrors
mv yyerror Errorf
mv yyerrorl ErrorfAt
mv yyerrorv ErrorfVers
mv noder.yyerrorpos noder.errorAt
mv Warnl WarnfAt
mv errorexit ErrorExit
mv base.go debug.go flag.go print.go cmd/compile/internal/base
'
: # update comments
sed -i '' 's/yyerrorl/ErrorfAt/g; s/yyerror/Errorf/g' *.go
: # bootstrap.go is not built by default so invisible to rf
sed -i '' 's/Fatalf/base.Fatalf/' bootstrap.go
goimports -w bootstrap.go
: # update cmd/dist to add internal/base
cd ../../../dist
sed -i '' '/internal.amd64/a\
"cmd/compile/internal/base",
' buildtool.go
gofmt -w buildtool.go
Change-Id: I59903c7084222d6eaee38823fd222159ba24a31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/272250
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that the debug settings are in a struct, use struct tags to set
the usage messages and use reflection to populate debugtab,
much like we did for the Flag struct.
Change-Id: Id2ba30c30a9158c062527715a68bf4dd94679457
Reviewed-on: https://go-review.googlesource.com/c/go/+/272247
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The debug table is not as haphazard as flags, but there are still
a few mismatches between command-line names and variable names.
This CL moves them all into a consistent home (var Debug, like var Flag).
Code updated automatically using the rf command below.
A followup CL will make a few manual cleanups, leaving this CL
completely automated and easier to regenerate during merge
conflicts.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
add main.go var Debug struct{}
mv Debug_append Debug.Append
mv Debug_checkptr Debug.Checkptr
mv Debug_closure Debug.Closure
mv Debug_compilelater Debug.CompileLater
mv disable_checknil Debug.DisableNil
mv debug_dclstack Debug.DclStack
mv Debug_gcprog Debug.GCProg
mv Debug_libfuzzer Debug.Libfuzzer
mv Debug_checknil Debug.Nil
mv Debug_panic Debug.Panic
mv Debug_slice Debug.Slice
mv Debug_typeassert Debug.TypeAssert
mv Debug_wb Debug.WB
mv Debug_export Debug.Export
mv Debug_pctab Debug.PCTab
mv Debug_locationlist Debug.LocationLists
mv Debug_typecheckinl Debug.TypecheckInl
mv Debug_gendwarfinl Debug.DwarfInl
mv Debug_softfloat Debug.SoftFloat
mv Debug_defer Debug.Defer
mv Debug_dumpptrs Debug.DumpPtrs
mv flag.go:/parse.-d/-1,/unknown.debug/+2 parseDebug
mv debugtab Debug parseDebug \
debugHelpHeader debugHelpFooter \
debug.go
# Remove //go:generate line copied from main.go
rm debug.go:/go:generate/-+
'
Change-Id: I625761ca5659be4052f7161a83baa00df75cca91
Reviewed-on: https://go-review.googlesource.com/c/go/+/272246
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #40700
Change-Id: I056cef20a5f071977d0ae589c7a50d5f69af3283
Reviewed-on: https://go-review.googlesource.com/c/go/+/273166
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Now that all flags are in a struct, use struct tags to set the usage messages
and use reflection to walk the struct and register all the flags.
Also move some flag usage back into main.go that shouldn't
come with the rest of flag.go into package base.
Change-Id: Ie655582194906c9ab425c3d01ad8c304bc49bfe0
Reviewed-on: https://go-review.googlesource.com/c/go/+/271668
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 34641 changed the Go runtime to assume GOARM=7 support on Android.
This change completes that by assuming GOARM=7 in the toolchain, fixing
the gotcha of inexplicably slow performance on non-arm64 Android devices.
There is already code in cmd/dist to force GOARM to 7 on GOOS=android. However,
dist is most likely run with GOOS != android.
Change-Id: I5e2bf11c3ecd0f6c193229eaa8ddc570722799d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/272846
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Elias Naur <mail@eliasnaur.com>
When c.elemsize==0 we call raceacquire() and racerelease()
as opposed to calling racereleaseacquire()
The reason for this change is that, when elemsize==0, we don't
allocate a full buffer for the channel. Instead of individual
buffer entries, the race detector uses the c.buf as the only
buffer entry. This simplification prevents us following the
memory model's happens-before rules implemented in racereleaseacquire().
So, instead of calling racereleaseacquire(), we accumulate
happens-before information in the synchronization object associated
with c.buf.
The functionality in this change is implemented in a new function
called racenotify()
Fixes#42598
Change-Id: I75b92708633fdfde658dc52e06264e2171824e51
Reviewed-on: https://go-review.googlesource.com/c/go/+/271987
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
In the previous CL, I had incorrectly removed one of the error
messages from issue20232.go, because I thought go/constant was just
handling it. But actually the compiler was panicking in nodlit,
because it didn't handle constant.Unknown. So this CL makes it leave
n.Type == nil for unknown constant.Values.
While here, also address #42732 by making sure to report an error
message when origConst is called with an unknown constant.Value (as
can happen when multiplying two floating-point constants overflows).
Finally, add OXOR and OBITNOT to the list of operations to report
errors about, since they're also constant expressions that can produce
a constant with a greater bit length than their operands.
Fixes#42732.
Change-Id: I4a538fbae9b3ac4c553d7de5625dc0c87d9acce3
Reviewed-on: https://go-review.googlesource.com/c/go/+/272928
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The existing code introduces many types in what appears to be an
attempt to avoid allocation when converting formatting argument lists.
Simplify by accepting that allocation is going to happen, especially
when Node itself turns into an interface.
Change-Id: I3c0d45ca01eace4924deb43c0ea7dc6d65943d08
Reviewed-on: https://go-review.googlesource.com/c/go/+/272929
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The goal is to move Node to being an interface and then break
up the one big struct into many implementations.
Step 1 is to convert all current uses of Node to only use methods,
so that the existing algorithms keep working even as the underlying
implementations are adjusted.
Step 0 - this CL - is to add the getters and setters for Step 1.
Change-Id: I0570d8727c3ccb64113627bb9bebcb0dc39da07a
Reviewed-on: https://go-review.googlesource.com/c/go/+/273007
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For the upcoming rewrite to access methods, a few direct accesses
are problematic for the automated tool, most notably direct copies
or use of Node structs as opposed to pointers.
Fix these manually.
Passes toolstash -cmp.
Change-Id: I8bdbb33216737c09e1edda284d5c414422d86284
Reviewed-on: https://go-review.googlesource.com/c/go/+/273006
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
I've wanted a FatalfAt function for a while, but under the old "-l"
suffix naming convention it would have been called "Fatalfl", which is
just atrocious.
Change-Id: If87f692ecdff478769426d4b054ac396e5c1e42e
Reviewed-on: https://go-review.googlesource.com/c/go/+/273013
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The linker already has R_AARCH64_LDST{8,32,64,128}_ABS_LO12_NC, some cgo tests require
R_AARCH64_LDST16_ABS_LO12_NC, this CL adds this relocation type.
Fixes#42660
Change-Id: I9a5120cd872f5095c61175cb602427c6ab3225cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/271017
Reviewed-by: eric fang <eric.fang@arm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: eric fang <eric.fang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: eric fang <eric.fang@arm.com>
Trust: Benny Siegert <bsiegert@gmail.com>
Currently, gentraceback decides which frames to print or elide when
unwinding inlined frames using only the name of the outermost
function. If the outermost function should be elided, then inlined
functions will also be elided, even if they shouldn't be.
This happens in practice in at least one situation. As of CL 258938,
exported Go functions (and functions they call) can now be inlined
into the generated _cgoexp_HASH_FN function. The runtime elides
_cgoexp_HASH_FN from tracebacks because it doesn't contain a ".".
Because of this bug, it also elides anything that was inlined into it.
This CL fixes this by synthesizing a funcInfo for the inlined
functions to pass to showframe.
Fixes#42754.
Change-Id: Ie6c663a4a1ac7f0d4beb1aa60bc26fc8cddd0f9d
Reviewed-on: https://go-review.googlesource.com/c/go/+/272131
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This moves the C part of the CrashTraceback test into its own file in
preparation for adding a test that transitions back into Go.
Change-Id: I9560dcfd80bf8a1d30809fd360f958f5261ebb01
Reviewed-on: https://go-review.googlesource.com/c/go/+/272130
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
evconst is one of the largest sources of Op rewrites,
which prevent separating different kinds of nodes
(in this case, arithmetic nodes and OLITERAL nodes).
The change in swt.go is necessary because otherwise
the syntax graph ends up containing that OLEN expression
multiple times, which violates the invariant that it's a tree
except for ONAME, OLITERAL, and OTYPE nodes.
(Before, the OLEN was overwritten by an OLITERAL, so the
invariant still held, but now that we don't overwrite it,
we need a different copy for each instance.)
Passes toolstash -cmp.
Change-Id: Ia004774ab6852fb384805d0f9f9f234b40842811
Reviewed-on: https://go-review.googlesource.com/c/go/+/272869
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The leftover n.List is clearly unnecessary, but it makes the
inlining cost of the expression unnecessarily high.
This change breaks toolstash -cmp:
# cmd/internal/src
toolstash: compiler output differs, with optimizers disabled (-N)
inconsistent log line:
/tmp/go-build866291351/b230/_pkg_.a.log:77:
/Users/rsc/go/src/cmd/internal/src/pos.go:275:6: can inline (*PosBase).SymFilename with cost 9 as: method(*PosBase) func() string { if b != nil { return b.symFilename }; return "gofile..??" }
/tmp/go-build866291351/b230/_pkg_.a.stash.log:77:
/Users/rsc/go/src/cmd/internal/src/pos.go:275:6: can inline (*PosBase).SymFilename with cost 11 as: method(*PosBase) func() string { if b != nil { return b.symFilename }; return "gofile..??" }
Separated from other constant work so that the bigger CL can pass toolstash -cmp.
Change-Id: I5c7ddbc8373207b5b9824eafb8639488da0ca1b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/272868
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
A method expression today is an ONAME that has none of the
invariants or properties of other ONAMEs and is always a special case
(hence the Node.IsMethodExpression method).
Remove the special cases by making a separate Op.
Passes toolstash -cmp.
Change-Id: I7667693c9155d5486a6924dbf75ebb59891c4afc
Reviewed-on: https://go-review.googlesource.com/c/go/+/272867
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL is obviously OK but does not pass toolstash -cmp,
because it renumbers the Op codes. In a separate CL so that
we can use toolstash -cmp on the CL with real changes
related to OMETHEXPR.
Change-Id: I1db978e3f2652b3bdf51f7981a3ba5137641c8c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/272866
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The original meaning of type Func was "extra fields factored out
of a few cases of type Node having to do with functions",
but those specific cases didn't necessarily have any relation.
A typical declared function is represented by an ODCLFUNC Node
at its declaration and an ONAME node at its uses, and both those
have a .Func field, but they are *different* Funcs.
Similarly, a closure is represented both by an OCLOSURE Node for
the value itself and an ODCLFUNC Node for the underlying function
implementing the closure. Those too have *different* Funcs,
and the Func.Closure field in one points to the other and vice versa.
This has led to no end of confusion over the years.
This CL elevates type Func to be the canonical identifier for
a given Go function.
This looks like a trivial CL but in fact is the result of a lot of
scaffolding and rewriting, discarded once the result was achieved, to
separate out the three different kinds of Func nodes into three
separate fields, limited in use to each specific Node type, to
understand which Func fields are used by which Node types and what the
possible overlaps are. There were a few overlaps, most notably around
closures, which led to more fields being added to type Func to keep
them separate even though there is now a single Func instead of two
different ones for each function.
A future CL can and should change Curfn to be a *Func instead of
a *Node, finally eliminating the confusion about whether Curfn
is an ODCLFUNC node (as it is most of the time) or an ONAME node
(as it is when type-checking an inlined function body).
Although sizeof_test.go makes it look like Func is growing by two
words, there are now half as many Funcs in a running compilation,
so the memory footprint has actually been reduced substantially.
Change-Id: I598bd96c95728093dc769a835d48f2154a406a61
Reviewed-on: https://go-review.googlesource.com/c/go/+/272253
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We want to refactor a bit, and these tests know too much about
the layout of Nodes. Use standard constructors instead.
Change-Id: I91f0325c89ea60086655414468c53419ebeacea4
Reviewed-on: https://go-review.googlesource.com/c/go/+/272626
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The additions were generated using golang.org/x/build/cmd/relnote
at CL 272907. It was modified to find previously-missed entries
by querying the Gerrit API in addition to the maintner corpus.
For #40700.
Updates #41849.
Change-Id: If575984fe40e0133ad5e8fc5411ea5063457250d
Reviewed-on: https://go-review.googlesource.com/c/go/+/272871
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
go/constant relies on strconv for parsing Go literals, while older
versions of strconv either lack recent Go language features (e.g., Go
1.13's new numeric literals) or have errors (e.g., mishandling of
carriage returns in raw string literals prior to Go 1.8).
This requires two changes:
1. Splitting out the internal/bytealg dependency into a separate file,
which can be easily substituted with a simple loop for bootstrap
builds.
2. Updating eisel_lemire.go to not utilize Go 1.13 functionality
(underscores in numeric literals and signed shift counts).
Change-Id: Ib48a858a03b155eebdcd08d577aec2254337e70e
Reviewed-on: https://go-review.googlesource.com/c/go/+/272749
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Since CL 255217, we've been able to rely on types.UntypedRune to
identify untyped rune literals, rather than needing Mpint.Rune /
CTRUNE. This makes way for switching to using go/constant, which
doesn't have a separate notion of rune constants distinct from integer
constants.
Passes toolstash-check.
Change-Id: I319861f4758aeea17345c101b167cb307e706a0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/272652
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Small refactoring to make subsequent CLs clearer.
Passes toolstash-check.
Change-Id: I1a6ae599f491220d44aaabae0b7bed4aff46ee92
Reviewed-on: https://go-review.googlesource.com/c/go/+/272651
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
