Most of the issues that led to the decision on #30055 were related to
incompatibility with or faulty support for RSA-PSS (#29831, #29779,
v1.5 signatures). RSA-PSS is required by TLS 1.3, but is also available
to be negotiated in TLS 1.2.
Altering TLS 1.2 behavior based on GODEBUG=tls13=1 feels surprising, so
just disable RSA-PSS entirely in TLS 1.2 until TLS 1.3 is on by default,
so breakage happens all at once.
Updates #30055
Change-Id: Iee90454a20ded8895e5302e8bcbcd32e4e3031c2
Reviewed-on: https://go-review.googlesource.com/c/160998
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Note the removal of the go tool tour command in the Go 1.12 release
notes.
Updates #24819
Change-Id: I258ab9401ea2cc06a83328c67299376fcf23c980
Reviewed-on: https://go-review.googlesource.com/c/158618
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
I needed Go 1.10 to debug and fix a test failure on that Go version in
x/tools, but I forgot what the magic 'go get' command for this was.
Googling "download specific golang version" and similar keywords showed
no results, presumably because the golang.org/dl subrepo isn't
prominently recommended nor documented anywhere.
The most appropriate documentation page to add this to is doc/install,
since it goes into some detail and is well indexed. We only need a short
section to introduce the trick.
The example does mention a specific version, Go 1.10.7, but I couldn't
imagine a way to make it version-agnostic while still being clear on
what the commands effectively do.
Change-Id: I13158564d76d95caec412cdb35a50a4356df5863
Reviewed-on: https://go-review.googlesource.com/c/157457
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This is about a minor change but worthy of note because this
may affect the profile results users will see.
Change-Id: Ie2c4358b248f868662dbc71db587576481aa7238
Reviewed-on: https://go-review.googlesource.com/c/158577
Reviewed-by: Raul Silvera <rauls5382@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
The ABI changes should be completely transparent to Go code, but could
cause linking issues in certain situations involving assembly code
reaching across package boundaries. If users encounter linking
problems, point them to the "Compatibility" section of the ABI design
document, which gives some guidance.
Change-Id: I4156d164562e2ec0de7ae8f9a3631a32ec45b317
Reviewed-on: https://go-review.googlesource.com/c/158237
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Worth mentioning because the results are not bit-for-bit identical.
This causes a test failure in github.com/fogleman/gg.
Updates #6794
Change-Id: I701f34927731fb5c658a1be271c04388e5e7e3f7
Reviewed-on: https://go-review.googlesource.com/c/157417
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was recently updated (again) to version 2018i. Since we're here,
wrap the paragraph at ~70 columns, like all the others.
Change-Id: I0a380385f34f1df1258a9f2af447234967422f37
Reviewed-on: https://go-review.googlesource.com/c/156857
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Change a link in the cgo section of the 1.12 release notes from
https://golang.org/cmd/cgo ...
to
/cmd/cgo/ ...
to uniform it with other links on the page, and to ensure correct
target when the page is displayed on tip.golang.org.
Change-Id: I7653a6ea15ce111a60929c7ae7e9fb0dc9515502
Reviewed-on: https://go-review.googlesource.com/c/156858
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A workaround has been submitted.
Updates #27993
Change-Id: Ife6443c32673b38000b90dd2efb2985db37ab773
Reviewed-on: https://go-review.googlesource.com/c/156318
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
whereas this is a longstanding tradition
and insofaras it is worth continuing such traditions
and notwithstanding an attempt at future-proofing
thetruthofthematter is that I have been waiting for years to send this change
so despiteallobjections I have updated the copyright year.
Change-Id: I55961b15a7eda35d84fdd9250afdbe19f0bf8412
Reviewed-on: https://go-review.googlesource.com/c/155928
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Currently the link works also with the non-existing GOARCH armd64, but
let's correct in anyhow.
Change-Id: Ida647b8f9dd2f8460b019f5a23759f10a6da8e60
Reviewed-on: https://go-review.googlesource.com/c/155277
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix two typos and don't indent the go vet example.
Change-Id: Iccec56ca5decfbae45547a00115500ed13b703e1
Reviewed-on: https://go-review.googlesource.com/c/154721
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also update a Go 1 compatibility promise link to canonical URL.
Updates #27592
Updates #28264
Change-Id: I5994a0a63e0870c1795c65016590dfad829d26a7
Reviewed-on: https://go-review.googlesource.com/c/154618
Reviewed-by: Richard Musiol <neelance@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Allow GOCACHE=off only for operations that never actually write
anything to the cache (in which case the GOCACHE setting should not
matter at all).
Fixes#29127
Change-Id: I733d02cd2fbcf3671f5adcfb73522865d131e360
Reviewed-on: https://go-review.googlesource.com/c/153462
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The String method is n-squared and overwrites its receiver.
Fix both issues, with only a slight loss of clarity.
Fixes#28773
Change-Id: I588f69d4cbd72931b28b984671512834473bd466
Reviewed-on: https://go-review.googlesource.com/c/151217
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#27619
Change-Id: If18df696c0778efe894a4a249d4964db1b02e5d6
Reviewed-on: https://go-review.googlesource.com/c/150159
Reviewed-by: Yuval Pavel Zholkover <paulzhol@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This text changed in CL 139099 to add "explicit" in front of "conversion".
But now "explicit conversion or assignment" reads like it might mean
"explicit [conversion or assignment]" when what is meant is
"[explicit conversion] or assignment". To make clear that explicit does
not apply to assignment, use "assignment or explicit conversion".
Change-Id: I8ff7a5b3ecd9f562793502fa6808242f22264f28
Reviewed-on: https://go-review.googlesource.com/c/149340
Reviewed-by: Robert Griesemer <gri@golang.org>
Adjusted spec to explicitly define the string length as the
number of bytes of the string; the prose now matches the prose
for arrays. Made analogous change for slices.
Fixes#28736.
Change-Id: I47cab321c87de0a4c482f5466b819b2cc8993fd1
Reviewed-on: https://go-review.googlesource.com/c/149077
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In ARM64 ABI, R18 is the "platform register", the use of which is
OS specific. The OS could choose to reserve this register. In
practice, it seems fine to use R18 on Linux but not on darwin (iOS).
Rename R18 to R18_PLATFORM to prevent accidental use. There is no
R18 usage within the standard library (besides tests, which are
updated).
Fixes#26110
Change-Id: Icef7b9549e2049db1df307a0180a3c90a12d7a84
Reviewed-on: https://go-review.googlesource.com/c/147218
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Effective Go and the FAQ still had some instances which showed the command line
usage of godoc. Changed them to use go doc.
Updates #25443
Change-Id: If550963322034e6848bc466f79e968e7220e4a88
Reviewed-on: https://go-review.googlesource.com/c/145222
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A prior attempt at addressing the issue got bogged down in an
endless conversation around the subtleties of Read semantics.
Let's not go there.
Instead, we put the issue to bed, perhaps not in perfect comfort
but well enough, by moving a line of the example so that even
if there is a "benign" error as the issue suggests, the loop
terminates with n and err correctly set.
Fixes#27818
Change-Id: I4a32d56c9e782f17578565d90b22ce531e3d8667
Reviewed-on: https://go-review.googlesource.com/c/143677
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As of golang.org/cl/141857 the import path has changed from
golang.org/x/tour/gotour to golang.org/x/tour
Change-Id: Ib54ab2e50188ef66c8a5c45136babfa49ad6934a
Reviewed-on: https://go-review.googlesource.com/c/141917
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The spec currently provides a syntactic rule for receiver base types,
and a strict reading of those rules prohibits the use of type aliases
referring to pointer types as receiver types.
This strict interpretation breaks an assumed rule for aliases, which
is that a type literal can always be replaced by an alias denoting
that literal.
Furthermore, cmd/compile always accepted this new formulation of the
receiver type rules and so this change will simply validate what has
been implemented all along.
Fixes#27995.
Change-Id: I032289c926a4f070d6f7795431d86635fe64d907
Reviewed-on: https://go-review.googlesource.com/c/142757
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
I've linked the gophers discord. It's a well administered discord which already got many members, but it was never officially linked. For many people it's a quality proof if a discord is linked on the official page. I think there are much more people out there, who would prefer to use discord instead of slack or irc.
The discord already got many users without even being promoted, so it's very likely there are many people who are interested in a discord, but they don't want to use unofficial discords. This discord shouldn't be seen as a competitor for the slack, it's a platform for those, who don't want to use slack.
Change-Id: Ib1ee7173f394b810f5cccf67b498485ecbf8a7db
GitHub-Last-Rev: 286ebad994
GitHub-Pull-Request: golang/go#24176
Reviewed-on: https://go-review.googlesource.com/c/97718
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The spec used the term "conversion" somewhat indiscriminately for
explicit conversions that appear literally in the source, and implicit
conversions that are implied by the context of an expression.
Be clearer about it by defining the terms.
Also, state that integer to string conversions of the form string(x)
are never implicit. This clarifies situations where implicit conversions
might require an integer to change to a string (but don't and never have
done so). See line 3948.
Fixes#26313.
Change-Id: I8939466df6b5950933ae7c987662ef9f88827fda
Reviewed-on: https://go-review.googlesource.com/c/139099
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This hasn't been true at least since 1.4. Until golang.org/cl/137235
they were lumped together into a random compile unit, now they are
assigned to the correct one.
Change-Id: Ib66539bd67af3e9daeecac8bf5f32c10e62e11b1
Reviewed-on: https://go-review.googlesource.com/138415
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: David Chase <drchase@google.com>
Fixes#27802.
Change-Id: I7ea9f7279300a55b0cb851893edc591a6f84e324
Reviewed-on: https://go-review.googlesource.com/136758
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It's worth clarifying that the language is called "Go".
Fixes#27616.
Change-Id: Ie4a9cb5e7e6afa437c60e06914125ef7490f27d0
Reviewed-on: https://go-review.googlesource.com/135517
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In Go 1.11, cmd/go gained support for the GOFLAGS environment variable.
It was added and described in detail in CL 126656.
Mention it in the Go 1.11 release notes, link to the cmd/go documentation,
and add more details there.
Fixes#27282.
Change-Id: Ifc35bfe3e0886a145478d36dde8e80aedd8ec68e
Reviewed-on: https://go-review.googlesource.com/135035
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Rob Pike <r@golang.org>
The discussion list was buried beneath the developer mailing list.
This change puts the discussion list first and gives it a more
prominent heading.
Change-Id: I8dcb4af98e454ae3a0140f9758a5656909126983
Reviewed-on: https://go-review.googlesource.com/134136
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The benchstat tool computes statistics about benchmarks, including
whether any differences are statistically significant. Recommend its use
in commit messages of performance-related changes rather than the
simpler benchcmp tool.
Change-Id: I4b35c2d892b48e60c3064489b035774792c19c30
Reviewed-on: https://go-review.googlesource.com/132515
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The wiki page has recently been created, and at this time it's
just a stub. It's expected that support for WebAssembly will be
evolving over time, and the wiki page can be kept updated with
helpful information, how to get started, tips and tricks, etc.
Use present tense because it's expected that there will be more
general information added by the time Go 1.11 release happens.
Also add link to https://webassembly.org/ in first paragraph.
Change-Id: I139c2dcec8f0d7fd89401df38a3e12960946693f
Reviewed-on: https://go-review.googlesource.com/131078
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The unexported field is hidden from reflect based marshalers, which
would break otherwise. Also, make it return an error, as there are
multiple reasons it might fail.
Fixes#27125
Change-Id: I92adade2fe456103d2d5c0315629ca0256953764
Reviewed-on: https://go-review.googlesource.com/130535
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Complete CL117178 removing all references to GitHub, and leaving
a small note to make sure we remember that it's not supported.
Change-Id: Id4257515a864875808fa7a67f002ed52cfd635a3
Reviewed-on: https://go-review.googlesource.com/130395
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Also, rename an HTML element ID to avoid duplicate.
Fixesgolang/go#27038
Change-Id: Icc064a1cc86ddc794fc085d98b4cde3effff8ad0
Reviewed-on: https://go-review.googlesource.com/129635
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
It's already half gone and later will be all gone.
It's not worth explaining in an introduction doc.
Fixes#24506
Updates #4719
Change-Id: Ie48128b3aa090d84e0e734aa45f14a4480292913
Reviewed-on: https://go-review.googlesource.com/129679
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For contributors looking for new issues to contribute to it can be
difficult to find issues that need a fix and don't already have a fix
being considered. There are several labels that help guide the way
already, like `NeedsFix`, `HelpWanted`. But many issues with this label
will already have a CL. For new contributors this can be especially
difficult.
Fixes#26494
Change-Id: Ifd38ea65e362b4c580207a06f959646e49ac594f
GitHub-Last-Rev: 6d2b54447b
GitHub-Pull-Request: golang/go#26516
Reviewed-on: https://go-review.googlesource.com/125355
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also updates the bundled http2 to x/net/http2 git rev 49c15d80 for:
http2: revert CL 107295 (don't sniff Content-type in Server when nosniff)
https://golang.org/cl/126895Fixes#24795
Change-Id: I6ae1a21c919947089274e816eb628d20490f83ce
Reviewed-on: https://go-review.googlesource.com/126896
Reviewed-by: Damien Neil <dneil@google.com>
The FAQ already has a link to the release notes and the go command docs.
Add a link from the release notes to the go command docs, to ensure that
people ultimately end up there (the docs that then signpost
people to the relevant other help docs).
Updates #25517.
Change-Id: I284c84af712d4519c59f7ca6c396b05a4c967cee
Reviewed-on: https://go-review.googlesource.com/126777
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add the tools section with a Gofmt sub-section, just like in
go1.10.html. Instead of copying the two last paragraphs from 1.10, which
warn users about the hidden complexity of enforcing gofmt, move that to
go/format and link to it.
While at it, remove a duplicate "Tools" header that was likely added by
accident.
Fixes#26228.
Change-Id: Ic511c44b2b86f82a41f2b78dd7e7482d694b6c62
Reviewed-on: https://go-review.googlesource.com/122295
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I3bcf8850ad3873f2627ba017cbfb8b7a8c9cf467
Reviewed-on: https://go-review.googlesource.com/125256
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The backwards incompatible changes were undone in CL 120355, while still
preserving the additions needed for assignments in templates to work.
Change-Id: Ie76a798916ef36509c88e171a04bb2cf2a3d7e8e
Reviewed-on: https://go-review.googlesource.com/124917
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Completely replace the opener, which had become not only stale
but bad, expand the discussion of the gopher, and generally provide
prose more connected to the present than to the programming world
of 2007.
Fixes#26107
Change-Id: I5e72f0c81e71d1237fe142dc26114991329a6996
Reviewed-on: https://go-review.googlesource.com/124616
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The final API uses 'region' instead of 'span' from the proposal.
Change-Id: I305da891a360596fff89b10bc6de3090289b5396
Reviewed-on: https://go-review.googlesource.com/124815
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Text based on CL 124655.
Change-Id: I7c4866ce829cb28a4c60cd8ced3ef99047a38c54
Reviewed-on: https://go-review.googlesource.com/124711
Reviewed-by: Austin Clements <austin@google.com>
This doesn't auto-deploy to golang.org, only tip.golang.org.
Change-Id: I112743ada2c1393e21edcc9075127f40da9e6270
Reviewed-on: https://go-review.googlesource.com/124755
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Mention the change in the behavior of go test -memprofile.
Change-Id: I0384f058298bd8fcfd2d97996464d46b4e419938
Reviewed-on: https://go-review.googlesource.com/124656
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Missed in CL 124516.
Change-Id: I6488196c8392987d69eca832ab4969aaafe1a26c
Reviewed-on: https://go-review.googlesource.com/124658
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The change to make the runtime use libSystem.so macOS instead of
direct kernel calls applies to iOS as well.
Change-Id: I97ea86452ac5f7433aea58bbd3ff53a2eb2835e0
Reviewed-on: https://go-review.googlesource.com/124657
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This should have been added to the repo after Renee's Gophercon
keynote. I will link to it from the FAQ.
Change-Id: I0e5b88690e288827591d27b99420d3a449f7f662
Reviewed-on: https://go-review.googlesource.com/124615
Reviewed-by: Andrew Gerrand <adg@golang.org>
Bring it up to date with recent terminology, mention new approaches
such as in Rust, and link to the new blog post.
Change-Id: I1d0b121e6f8347c3cf2c8ca0d8adc8285ce59ef1
Reviewed-on: https://go-review.googlesource.com/124475
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since Go1.10, go test runs vet on the tests before executing them.
Moreover, the vet tool typechecks the package under analysis with
go/types before running. In Go1.10, a typechecking failure just caused
a warning to be printed. In Go1.11, a typechecking failure will cause
vet to exit with a fatal error (see Issue #21287).
This means that starting with Go1.11, tests that don't typecheck will
fail immediately. This would not normally be an issue, since a test
that doesn't typecheck shouldn't even compile, and it should already
be broken.
Unfortunately, there's a bug in gc that makes it accept programs with
unused variables inside a closure (Issue #3059). This means that a
test with an unused variable inside a closure, that compiled and
passed in Go1.10, will fail in the typechecking step of vet starting
with Go1.11.
Explain this in the 1.11 release notes.
Fixes#26109
Change-Id: I970c1033ab6bc985d8c64bd24f56e854af155f96
Reviewed-on: https://go-review.googlesource.com/121455
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is close to a complete rewrite, as the content was pretty old.
The CL includes links to the Wiki for information about companies
using Go, a new section about IDEs and editors¹, and a restatement
of the foreign function interface story. It also modernizes and
expands a little on the use of Go inside Google.
¹ Ed is the standard editor.
Change-Id: I5e54aafa53d00d86297b2691960a376b40f6225b
Reviewed-on: https://go-review.googlesource.com/123922
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Significant surgery done to the Versioning section, bringing it closer to
modern thinking.
Also add a question about constants.
Update #26107.
Change-Id: Icf70b7228503c6baaeab0b95ee3e6bee921575aa
Reviewed-on: https://go-review.googlesource.com/123918
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Changes are mostly about making more about now than about the past,
changing some verb tenses, and mentioning gollvm (which should
be pronounced "gollum" if you ask me).
Update #26107
Change-Id: I6c14f42b9fc2684259d4ba8bc149d7ec9bb83d15
Reviewed-on: https://go-review.googlesource.com/123917
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The old text was written when it was only 1 by default, which
changed a long time ago.
Also add a note that GOMAXPROCS does not limit the total
number of threads.
Change-Id: I104ccd7266d11335320a4d7f5671fb09ed641f88
Reviewed-on: https://go-review.googlesource.com/123916
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Many parts of the FAQ are dusty and need cleaning up.
This is the first of a series of changes to bring it up to date.
Since it was first written at the time of release, some of the
ideas and background have changed, and some historical
remarks are largely irrelevant now.
Update #26107.
Change-Id: I1f36df7d8ecc8a1a033d5ac4fa1edeece25ed6b4
Reviewed-on: https://go-review.googlesource.com/123496
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change "have to" to "need to" for clarity and to avoid a
peculiar English idiom.
Change-Id: Iec2b1f841d0353dd7925f8f934fe82d4ed059d7d
Reviewed-on: https://go-review.googlesource.com/123495
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also, remove some test code that was trying to work on XP and fix up
some comments referencing XP.
Fixes#26191
Updates #23380
Change-Id: I0b7319fe1954afddb22d396e5ec91d8c960268d8
Reviewed-on: https://go-review.googlesource.com/123415
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It will not be present in go1.11beta1 but will be present
in subsequent releases.
Change-Id: I298fb682945345bb4a34ec83802fd644f75bdd98
Reviewed-on: https://go-review.googlesource.com/120756
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change fixes a typo in doc/contribute.html (afects -> affects)
and rewords a few slightly akward sentences.
Change-Id: I6bfbacba0de29464fce134b0fdaf3898a97b8d57
Reviewed-on: https://go-review.googlesource.com/120105
Reviewed-by: Rob Pike <r@golang.org>
It's more common to specify GOOS/GOARCH values in that order,
rather than the inverse. Fix the order.
Updates #18892.
Change-Id: I8551508599e019f6617dc007397b562c9926418d
Reviewed-on: https://go-review.googlesource.com/120057
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The git clone url should be a Gerrit host and not Github, otherwise the
codereview command will fail.
git-codereview: failed to load Gerrit origin: git origin must be a Gerrit host, not GitHub: https://github.com/golang/go
Change-Id: I62f62c86ee6dce0720a844fc56340135dfae8405
Reviewed-on: https://go-review.googlesource.com/117178
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The name was "Mac OS X" during versions 10.0 to 10.7.
It was renamed to "OS X" starting from 10.8 until 10.11.
The current name is "macOS" starting with 10.12. [1]
Previous changes (e.g., CL 47252) updated "Mac OS X" to macOS
in some places, but not everywhere. This CL updates remaining
instances for consistency.
Only the pages that display current information were updated;
historical pages such as release notes for older Go releases,
past articles, blog posts, etc., were left in original form.
Rename the "#osx" anchor to "#macos" on /doc/install page,
along with the single reference to it on the same page.
Add an empty div with id="osx" to not break old links.
Update minimum macOS version from 10.8 to 10.10 per #23122.
[1]: https://en.wikipedia.org/wiki/macOS#History
Updates #23122.
Change-Id: I69fe4b85e83265b9d99f447e3cc5230dde094869
Reviewed-on: https://go-review.googlesource.com/119855
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In an effort to help others avoid the issues I've hit due to lack of
symlink support under GOPATH, I've added a note of warning to the
Workspaces section.
I have not changed the contents of go help gopath, because on reflection
it seems this change alone may be sufficient.
Fixes#21320
Change-Id: Ib8969bf12cecad878e89ff66b5864bbf3caaf219
Reviewed-on: https://go-review.googlesource.com/61930
Reviewed-by: Ian Lance Taylor <iant@golang.org>
After CL 113016 the "a" article is no longer necessary.
Change-Id: I5a80a210bd2b9eedd73d5f9f3f338d7f22c29ea6
Reviewed-on: https://go-review.googlesource.com/113355
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly just formatting and minor cleanup:
- regularize HTML (add </p> etc.)
- remove all errors caught by tidy
- start all sentences on new line for easy editing
Some wording changes, but there will be more to come.
It seemed there were already enough edits to send it out.
Update #24487
Change-Id: I613ce206b1e8e3e522ecb0bbcd2acb11c4ff5bae
Reviewed-on: https://go-review.googlesource.com/113015
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The phrase "couple X" is considered colloquial, so make that "a couple of X".
Also move the start of a sentence to a new line in a couple of places
for easier editing, in one place thereby removing two spaces after a period.
Change-Id: If5ef05eb496afc235f8f0134c4e7346375a65181
Reviewed-on: https://go-review.googlesource.com/112176
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The videos on the front page are always the same width, regardless of
the viewport width. These changes let the video fill the space given
to its container regardless of layout. It uses the standard hack for
making iframes responsive, but the videos are loaded at random and do
not have uniform aspect ratios so that information is injected into the
DOM using custom properties. If these are not supported, it falls back
to the same layout present before this change.
Note: this change also requires CL 108678 to complete the fix,
though either CL without the other is harmless.
Updates #24997.
Change-Id: I2f93dc21ffe01d99ce0e175e9dd0e3d486fddc9f
Reviewed-on: https://go-review.googlesource.com/108677
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
In the binary sizes FAQ, the approximate size of a Go hello world
binary was said to be 1.5MB (it was about 1.6MB on go1.7 on
linux/amd64). Sadly, this is no longer true. A Go1.10 hello world is
2.0MB, and in 1.11 it'll be about 2.5MB.
Just say "a couple megabytes" to stop this dance.
Change-Id: Ib4dc13a47ccd51327c1a9d90d4116f79597513a4
Reviewed-on: https://go-review.googlesource.com/110069
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
