These are plain data now, not nodes (see previous CL).
The opcode deletions are not safe for toolstash -cmp,
so they are split into a separate CL.
Change-Id: Icef8a01e190195a7539a35b92f42835d823e314a
Reviewed-on: https://go-review.googlesource.com/c/go/+/274104
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The type syntax is reused to stand in for the actual type once typechecked,
to avoid updating all the possible references to the original type syntax.
So all these implementations allow changing their Op from the raw syntax
like OTMAP to the finished form OTYPE, even though obviously the
representation does not change.
Passes buildall w/ toolstash -cmp.
Change-Id: I4acca1a5b35fa2f48ee08e8f1e5a330a004c284b
Reviewed-on: https://go-review.googlesource.com/c/go/+/274103
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This is a general operation on IR nodes, so it belongs in ir.
The copied implementation is adapted to support the
extension pattern, allowing nodes to implement their
own DeepCopy implementations if needed.
This is the first step toward higher-level operations instead
of Left, Right, etc. It will allow the new type syntax nodes
to be properly immutable and opt out of those fine-grained methods.
Passes buildall w/ toolstash -cmp.
Change-Id: Ibd64061e01daf14aebc6586cb2eb2b12057ca85a
Reviewed-on: https://go-review.googlesource.com/c/go/+/274102
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is not safe for toolstash -cmp and so is split into its own CL.
Change-Id: Ic3254e68fb84a90a11ac5f0b59ef252135c23658
Reviewed-on: https://go-review.googlesource.com/c/go/+/274101
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now there are no longer any generic nodes with a non-nil
associated Func, so node.fn can be deleted. Also all manipulation
of func fields is done with concrete types, so Node.SetFunc can be
deleted, along with generic implementations.
Passes buildall w/ toolstash -cmp.
Change-Id: I4fee99870951ec9dc224f146d87b22e2bfe16889
Reviewed-on: https://go-review.googlesource.com/c/go/+/274099
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Closures are another reference to Funcs,
and it cleans up the code quite a bit to be clear about types.
OCLOSUREVAR is renamed to OCLOSUREREAD to make
clearer that it is unrelated to the list Func.ClosureVars.
Passes buildall w/ toolstash -cmp.
Change-Id: Id0d28df2d4d6e9954e34df7a39ea226995eee937
Reviewed-on: https://go-review.googlesource.com/c/go/+/274098
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that we have specific types for ONAME and ODCLFUNC nodes
(*Name and *Func), use them throughout the compiler to be more
precise about what data is being operated on.
This is a somewhat large CL, but once you start applying the types
in a few places, you end up needing to apply them to many other
places to keep everything type-checking. A lot of code also melts
away as types are added.
Passes buildall w/ toolstash -cmp.
Change-Id: I21dd9b945d701c470332bac5394fca744a5b232d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274097
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before this CL, an ODCLFUNC Node was represented by both
a node struct and a Func struct (and a Name for the ONAME,
which isn't changing here). Now Func can be repurposed as
the ODCLFUNC implementation, replacing the two structs
totaling 280+144 = 424 bytes (64-bit) with a single 320-byte struct.
Using the *Func as the node also gives us a clear, typed answer to
“which node should we use to represent functions?”
The next CL will clean up uses. This CL is just the trivial
change in representation.
Passes buildall w/ toolstash -cmp.
Change-Id: Ie6d670da91d6eb8d67a85f8f83630b9586dc7443
Reviewed-on: https://go-review.googlesource.com/c/go/+/274096
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
No code changes here, only copying of text.
This will make the diffs in a future CL readable.
Passes buildall w/ toolstash -cmp.
Change-Id: I325a62e79edd82f1437769891ea63a32f51c0170
Reviewed-on: https://go-review.googlesource.com/c/go/+/274095
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before this CL, an ONAME Node was represented by three structs
linked together: a node, a Name, and a Param. Previous CLs removed
OLABEL and OPACK from the set of nodes that knew about Name.
Now Name can be repurposed to *be* the ONAME Node implementation,
replacing three linked structs totaling 152+64+88 = 304 bytes (64-bit)
with a single 232-byte struct.
Many expressions in the code become simpler as well, without having
to use .Param. and sometimes even .Name().
(For a node n where n.Name() != nil, n.Name() == n.(*Name) now.)
Passes buildall w/ toolstash -cmp.
Change-Id: Ie719f1285c05623b9fd2faaa059e5b360a64b3be
Reviewed-on: https://go-review.googlesource.com/c/go/+/274094
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
OPACK was using a whole Node and Name and Param
to hold about three fields. Give it its own implementation.
Passes buildall w/ toolstash -cmp.
Change-Id: I85a28b43d37183b2062d337b0b1b2eea52884e8c
Reviewed-on: https://go-review.googlesource.com/c/go/+/274093
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
No code changes here, only copying of text.
This will make the diffs in a future CL readable.
Passes buildall w/ toolstash -cmp.
Change-Id: I1b8d8b9ec9408859e36af5ff3bef7c6c10eac0d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/274092
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are the first three specific implementations of Node.
They are both a bit of a warmup and also working toward
removing references to Name from Node types other than
the proper named things - ONAME, ONONAME, OTYPE, OLITERAL.
(In this case, BranchStmt and LabelStmt.)
Passes buildall w/ toolstash -cmp.
Change-Id: Ide816b162025ee4c858dd061d7c29ed633fb7baf
Reviewed-on: https://go-review.googlesource.com/c/go/+/274091
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In preparation for OEMPTY being its own Node implementation,
remove SetOp(OEMPTY) calls that assume other implementations
can be turned into OEMPTY.
Passes buildall w/ toolstash -cmp.
Change-Id: Icac16d12548f35f52a5efa9d09dacf8260f42075
Reviewed-on: https://go-review.googlesource.com/c/go/+/274090
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are only needed for a few opcodes, and we can avoid
wasting storage in every implementation by using the extension
interface pattern with a helper function for access.
Of course, in the current codebase, there is only one Node
implementation (*node) and it has these methods, so there
is no danger of a functional change in this particular CL.
Passes buildall w/ toolstash -cmp.
Change-Id: I440c6c232f1fe7b56b852a00dc530f8f49a6b12d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274089
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Start a list of which ops are valid for the default
node struct implementation (currently all of them).
Add a Node implementation helper for a minimal node.
Passes buildall w/ toolstash -cmp.
Change-Id: I7ae45f2cf2be85013cb71ab00524be53f243e13d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274088
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Node.HasOpt is only used once, and that use can use Opt instead.
Interface is one method smaller.
Passes buildall w/ toolstash -cmp.
Change-Id: I6a9d5859a9977a8f4c9db70e166f50f0d8052160
Reviewed-on: https://go-review.googlesource.com/c/go/+/274087
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- The use of a label's Name.Defn to point at the named for/select/switch
means that any rewrite of the for/select/switch must overwrite the original
or else the pointer will dangle. Remove that pointer by adding the label
name directly to the for/select/switch representation instead.
- The only uses of a label's Sym.Label were ephemeral values during
markbreak and escape analysis. Use a map for each. Although in general
we are not going to replace all computed fields with maps (too slow),
the one in markbreak is only for labeled for/select/switch, and the one
in escape is for all labels, but even so, labels are fairly rare.
In theory this cleanup should make it easy to allow labeled for/select/switch
in inlined bodies, but this CL does not attempt that. It's only concerned
with cleanup to enable a new Node representation.
Passes buildall w/ toolstash -cmp.
Change-Id: I7e36ee98d2ea40dbae94e6722d585f007b7afcfa
Reviewed-on: https://go-review.googlesource.com/c/go/+/274086
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In CL 145200, I changed OBREAK, OCONTINUE, OGOTO, and OLABEL to just
use Sym instead of Node. However, within the export data, I forgot to
update the code for OBREAK and OCONTINUE.
This isn't currently an issue because the inliner currently disallows
these anyway, but it'll be an issue in the future once we add support
for inlining them. Also, Russ independently ran into it in CL 273246.
Updates #14768.
Change-Id: I94575df59c08a750b0dce1d3ce612aba7bfeeb76
Reviewed-on: https://go-review.googlesource.com/c/go/+/273270
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Many of the standard library changes that were added before CL 272871
ended up in the "Core library" section. That section is meant for
major changes like new packages, and most of these aren't.
Consolidate all changes in the "Minor changes to the library" section
for now, so that it's easier to get a complete picture of changes for
each package, along with the remaining TODOs. Add a TODO to read them
over at the end and factor out items that are worth highlighting.
Apply minor other fixups to improve consistency.
For #40700.
Change-Id: I7dc2e7ebf2ea3385fce0c207bae4ce467998a717
Reviewed-on: https://go-review.googlesource.com/c/go/+/273267
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes the android/arm builder. Without it, the builder reported
unexpected stale targets during bootstrap:
https://build.golang.org/log/b951f1171be54cf4a12c2a0720ffaf07f8a11377
Tighten the GOARM=7 default in cmd/internal/objabi while here.
Change-Id: I944744910193e72e91bc37b5bf0783076b45e579
Reviewed-on: https://go-review.googlesource.com/c/go/+/273167
Run-TryBot: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Elias Naur <mail@eliasnaur.com>
The plan is to introduce a Node interface that replaces the old *Node pointer-to-struct.
The previous CL defined an interface INode modeling a *Node.
This CL:
- Changes all references outside internal/ir to use INode,
along with many references inside internal/ir as well.
- Renames Node to node.
- Renames INode to Node
So now ir.Node is an interface implemented by *ir.node, which is otherwise inaccessible,
and the code outside package ir is now (clearly) using only the interface.
The usual rule is never to redefine an existing name with a new meaning,
so that old code that hasn't been updated gets a "unknown name" error
instead of more mysterious errors or silent misbehavior. That rule would
caution against replacing Node-the-struct with Node-the-interface,
as in this CL, because code that says *Node would now be using a pointer
to an interface. But this CL is being landed at the same time as another that
moves Node from gc to ir. So the net effect is to replace *gc.Node with ir.Node,
which does follow the rule: any lingering references to gc.Node will be told
it's gone, not silently start using pointers to interfaces. So the rule is followed
by the CL sequence, just not this specific CL.
Overall, the loss of inlining caused by using interfaces cuts the compiler speed
by about 6%, a not insignificant amount. However, as we convert the representation
to concrete structs that are not the giant Node over the next weeks, that speed
should come back as more of the compiler starts operating directly on concrete types
and the memory taken up by the graph of Nodes drops due to the more precise
structs. Honestly, I was expecting worse.
% benchstat bench.old bench.new
name old time/op new time/op delta
Template 168ms ± 4% 182ms ± 2% +8.34% (p=0.000 n=9+9)
Unicode 72.2ms ±10% 82.5ms ± 6% +14.38% (p=0.000 n=9+9)
GoTypes 563ms ± 8% 598ms ± 2% +6.14% (p=0.006 n=9+9)
Compiler 2.89s ± 4% 3.04s ± 2% +5.37% (p=0.000 n=10+9)
SSA 6.45s ± 4% 7.25s ± 5% +12.41% (p=0.000 n=9+10)
Flate 105ms ± 2% 115ms ± 1% +9.66% (p=0.000 n=10+8)
GoParser 144ms ±10% 152ms ± 2% +5.79% (p=0.011 n=9+8)
Reflect 345ms ± 9% 370ms ± 4% +7.28% (p=0.001 n=10+9)
Tar 149ms ± 9% 161ms ± 5% +8.05% (p=0.001 n=10+9)
XML 190ms ± 3% 209ms ± 2% +9.54% (p=0.000 n=9+8)
LinkCompiler 327ms ± 2% 325ms ± 2% ~ (p=0.382 n=8+8)
ExternalLinkCompiler 1.77s ± 4% 1.73s ± 6% ~ (p=0.113 n=9+10)
LinkWithoutDebugCompiler 214ms ± 4% 211ms ± 2% ~ (p=0.360 n=10+8)
StdCmd 14.8s ± 3% 15.9s ± 1% +6.98% (p=0.000 n=10+9)
[Geo mean] 480ms 510ms +6.31%
name old user-time/op new user-time/op delta
Template 223ms ± 3% 237ms ± 3% +6.16% (p=0.000 n=9+10)
Unicode 103ms ± 6% 113ms ± 3% +9.53% (p=0.000 n=9+9)
GoTypes 758ms ± 8% 800ms ± 2% +5.55% (p=0.003 n=10+9)
Compiler 3.95s ± 2% 4.12s ± 2% +4.34% (p=0.000 n=10+9)
SSA 9.43s ± 1% 9.74s ± 4% +3.25% (p=0.000 n=8+10)
Flate 132ms ± 2% 141ms ± 2% +6.89% (p=0.000 n=9+9)
GoParser 177ms ± 9% 183ms ± 4% ~ (p=0.050 n=9+9)
Reflect 467ms ±10% 495ms ± 7% +6.17% (p=0.029 n=10+10)
Tar 183ms ± 9% 197ms ± 5% +7.92% (p=0.001 n=10+10)
XML 249ms ± 5% 268ms ± 4% +7.82% (p=0.000 n=10+9)
LinkCompiler 544ms ± 5% 544ms ± 6% ~ (p=0.863 n=9+9)
ExternalLinkCompiler 1.79s ± 4% 1.75s ± 6% ~ (p=0.075 n=10+10)
LinkWithoutDebugCompiler 248ms ± 6% 246ms ± 2% ~ (p=0.965 n=10+8)
[Geo mean] 483ms 504ms +4.41%
[git-generate]
cd src/cmd/compile/internal/ir
: # We need to do the conversion in multiple steps, so we introduce
: # a temporary type alias that will start out meaning the pointer-to-struct
: # and then change to mean the interface.
rf '
mv Node OldNode
add node.go \
type Node = *OldNode
'
: # It should work to do this ex in ir, but it misses test files, due to a bug in rf.
: # Run the command in gc to handle gc's tests, and then again in ssa for ssa's tests.
cd ../gc
rf '
ex . ../arm ../riscv64 ../arm64 ../mips64 ../ppc64 ../mips ../wasm {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
cd ../ssa
rf '
ex {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
: # Back in ir, finish conversion clumsily with sed,
: # because type checking and circular aliases do not mix.
cd ../ir
sed -i '' '
/type Node = \*OldNode/d
s/\*OldNode/Node/g
s/^func (n Node)/func (n *OldNode)/
s/OldNode/node/g
s/type INode interface/type Node interface/
s/var _ INode = (Node)(nil)/var _ Node = (*node)(nil)/
' *.go
gofmt -w *.go
sed -i '' '
s/{Func{}, 136, 248}/{Func{}, 152, 280}/
s/{Name{}, 32, 56}/{Name{}, 44, 80}/
s/{Param{}, 24, 48}/{Param{}, 44, 88}/
s/{node{}, 76, 128}/{node{}, 88, 152}/
' sizeof_test.go
cd ../ssa
sed -i '' '
s/{LocalSlot{}, 28, 40}/{LocalSlot{}, 32, 48}/
' sizeof_test.go
cd ../gc
sed -i '' 's/\*ir.Node/ir.Node/' mkbuiltin.go
cd ../../../..
go install std cmd
cd cmd/compile
go test -u || go test -u
Change-Id: I196bbe3b648e4701662e4a2bada40bf155e2a553
Reviewed-on: https://go-review.googlesource.com/c/go/+/272935
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Define the interface for an IR node.
The next CL will shuffle the names and leave us with ir.Node being the interface.
Change-Id: Ifc40f7846d522cf99efa6b4e558bebb6db5218f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/272934
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The pointer hack was nice and saved a word, but it's untenable
in a world where nodes are themselves interfaces with different
underlying types. Bite the bullet and use an interface to hold the
Node when in types.Sym and types.Type.
This has the nice benefit of removing AsTypesNode entirely.
AsNode is still useful because of its nil handling.
Change-Id: I298cba9ff788b956ee287283bec78010e8b601e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/272933
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These are trivial rewrites that are only OK because it turns out that n has no side effects.
Separated into a different CL for easy inspection.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
ex . ../ir ../ssa {
import "cmd/compile/internal/ir"
var n *ir.Node
var i int64
n.Xoffset++ -> n.Xoffset = n.Xoffset + 1
n.Xoffset-- -> n.Xoffset = n.Xoffset - 1
n.Xoffset += i -> n.Xoffset = n.Xoffset + i
n.Xoffset -= i -> n.Xoffset = n.Xoffset - i
}
'
Change-Id: If7b4b7f7cbdafeee988e04d03924ef0e1dd867b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/272932
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The cycle hacks existed because gc needed to import ssa
which need to know about gc.Node. But now that's ir.Node,
and there's no cycle anymore.
Don't know how much it matters but LocalSlot is now
one word shorter than before, because it holds a pointer
instead of an interface for the *Node. That won't last long.
Now that they're not necessary for interface satisfaction,
IsSynthetic and IsAutoTmp can move to top-level ir functions.
Change-Id: Ie511e93466cfa2b17d9a91afc4bd8d53fdb80453
Reviewed-on: https://go-review.googlesource.com/c/go/+/272931
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we want to break up package gc at all, we will need to move
the compiler IR it defines into a separate package that can be
imported by packages that gc itself imports. This CL does that.
It also removes the TINT8 etc aliases so that all code is clear
about which package things are coming from.
This CL is automatically generated by the script below.
See the comments in the script for details about the changes.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
# These names were never fully qualified
# when the types package was added.
# Do it now, to avoid confusion about where they live.
inline -rm \
Txxx \
TINT8 \
TUINT8 \
TINT16 \
TUINT16 \
TINT32 \
TUINT32 \
TINT64 \
TUINT64 \
TINT \
TUINT \
TUINTPTR \
TCOMPLEX64 \
TCOMPLEX128 \
TFLOAT32 \
TFLOAT64 \
TBOOL \
TPTR \
TFUNC \
TSLICE \
TARRAY \
TSTRUCT \
TCHAN \
TMAP \
TINTER \
TFORW \
TANY \
TSTRING \
TUNSAFEPTR \
TIDEAL \
TNIL \
TBLANK \
TFUNCARGS \
TCHANARGS \
NTYPE \
BADWIDTH
# esc.go and escape.go do not need to be split.
# Append esc.go onto the end of escape.go.
mv esc.go escape.go
# Pull out the type format installation from func Main,
# so it can be carried into package ir.
mv Main:/Sconv.=/-0,/TypeLinkSym/-1 InstallTypeFormats
# Names that need to be exported for use by code left in gc.
mv Isconst IsConst
mv asNode AsNode
mv asNodes AsNodes
mv asTypesNode AsTypesNode
mv basicnames BasicTypeNames
mv builtinpkg BuiltinPkg
mv consttype ConstType
mv dumplist DumpList
mv fdumplist FDumpList
mv fmtMode FmtMode
mv goopnames OpNames
mv inspect Inspect
mv inspectList InspectList
mv localpkg LocalPkg
mv nblank BlankNode
mv numImport NumImport
mv opprec OpPrec
mv origSym OrigSym
mv stmtwithinit StmtWithInit
mv dump DumpAny
mv fdump FDumpAny
mv nod Nod
mv nodl NodAt
mv newname NewName
mv newnamel NewNameAt
mv assertRepresents AssertValidTypeForConst
mv represents ValidTypeForConst
mv nodlit NewLiteral
# Types and fields that need to be exported for use by gc.
mv nowritebarrierrecCallSym SymAndPos
mv SymAndPos.lineno SymAndPos.Pos
mv SymAndPos.target SymAndPos.Sym
mv Func.lsym Func.LSym
mv Func.setWBPos Func.SetWBPos
mv Func.numReturns Func.NumReturns
mv Func.numDefers Func.NumDefers
mv Func.nwbrCalls Func.NWBRCalls
# initLSym is an algorithm left behind in gc,
# not an operation on Func itself.
mv Func.initLSym initLSym
mv nodeQueue NodeQueue
mv NodeQueue.empty NodeQueue.Empty
mv NodeQueue.popLeft NodeQueue.PopLeft
mv NodeQueue.pushRight NodeQueue.PushRight
# Many methods on Node are actually algorithms that
# would apply to any node implementation.
# Those become plain functions.
mv Node.funcname FuncName
mv Node.isBlank IsBlank
mv Node.isGoConst isGoConst
mv Node.isNil IsNil
mv Node.isParamHeapCopy isParamHeapCopy
mv Node.isParamStackCopy isParamStackCopy
mv Node.isSimpleName isSimpleName
mv Node.mayBeShared MayBeShared
mv Node.pkgFuncName PkgFuncName
mv Node.backingArrayPtrLen backingArrayPtrLen
mv Node.isterminating isTermNode
mv Node.labeledControl labeledControl
mv Nodes.isterminating isTermNodes
mv Nodes.sigerr fmtSignature
mv Node.MethodName methodExprName
mv Node.MethodFunc methodExprFunc
mv Node.IsMethod IsMethod
# Every node will need to implement RawCopy;
# Copy and SepCopy algorithms will use it.
mv Node.rawcopy Node.RawCopy
mv Node.copy Copy
mv Node.sepcopy SepCopy
# Extract Node.Format method body into func FmtNode,
# but leave method wrapper behind.
mv Node.Format:0,$ FmtNode
# Formatting helpers that will apply to all node implementations.
mv Node.Line Line
mv Node.exprfmt exprFmt
mv Node.jconv jconvFmt
mv Node.modeString modeString
mv Node.nconv nconvFmt
mv Node.nodedump nodeDumpFmt
mv Node.nodefmt nodeFmt
mv Node.stmtfmt stmtFmt
# Constant support needed for code moving to ir.
mv okforconst OKForConst
mv vconv FmtConst
mv int64Val Int64Val
mv float64Val Float64Val
mv Node.ValueInterface ConstValue
# Organize code into files.
mv LocalPkg BuiltinPkg ir.go
mv NumImport InstallTypeFormats Line fmt.go
mv syntax.go Nod NodAt NewNameAt Class Pxxx PragmaFlag Nointerface SymAndPos \
AsNode AsTypesNode BlankNode OrigSym \
Node.SliceBounds Node.SetSliceBounds Op.IsSlice3 \
IsConst Node.Int64Val Node.CanInt64 Node.Uint64Val Node.BoolVal Node.StringVal \
Node.RawCopy SepCopy Copy \
IsNil IsBlank IsMethod \
Node.Typ Node.StorageClass node.go
mv ConstType ConstValue Int64Val Float64Val AssertValidTypeForConst ValidTypeForConst NewLiteral idealType OKForConst val.go
# Move files to new ir package.
mv bitset.go class_string.go dump.go fmt.go \
ir.go node.go op_string.go val.go \
sizeof_test.go cmd/compile/internal/ir
'
: # fix mkbuiltin.go to generate the changes made to builtin.go during rf
sed -i '' '
s/\[T/[types.T/g
s/\*Node/*ir.Node/g
/internal\/types/c \
fmt.Fprintln(&b, `import (`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/ir"`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/types"`) \
fmt.Fprintln(&b, `)`)
' mkbuiltin.go
gofmt -w mkbuiltin.go
: # update cmd/dist to add internal/ir
cd ../../../dist
sed -i '' '/compile.internal.gc/a\
"cmd/compile/internal/ir",
' buildtool.go
gofmt -w buildtool.go
: # update cmd/compile TestFormats
cd ../..
go install std cmd
cd cmd/compile
go test -u || go test # first one updates but fails; second passes
Change-Id: I5f7caf6b20629b51970279e81231a3574d5b51db
Reviewed-on: https://go-review.googlesource.com/c/go/+/273008
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It needs to move into package ir, and we do not want all the rest.
Change-Id: Ibcfa1ebc0e63fe3659267bf2fa7069e8a93de4e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/272930
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Move Flag, Debug, Ctxt, Exit, and error messages to
new package cmd/compile/internal/base.
These are the core functionality that everything in gc uses
and which otherwise prevent splitting any other code
out of gc into different packages.
A minor milestone: the compiler source code
no longer contains the string "yy".
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv atExit AtExit
mv Ctxt atExitFuncs AtExit Exit base.go
mv lineno Pos
mv linestr FmtPos
mv flusherrors FlushErrors
mv yyerror Errorf
mv yyerrorl ErrorfAt
mv yyerrorv ErrorfVers
mv noder.yyerrorpos noder.errorAt
mv Warnl WarnfAt
mv errorexit ErrorExit
mv base.go debug.go flag.go print.go cmd/compile/internal/base
'
: # update comments
sed -i '' 's/yyerrorl/ErrorfAt/g; s/yyerror/Errorf/g' *.go
: # bootstrap.go is not built by default so invisible to rf
sed -i '' 's/Fatalf/base.Fatalf/' bootstrap.go
goimports -w bootstrap.go
: # update cmd/dist to add internal/base
cd ../../../dist
sed -i '' '/internal.amd64/a\
"cmd/compile/internal/base",
' buildtool.go
gofmt -w buildtool.go
Change-Id: I59903c7084222d6eaee38823fd222159ba24a31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/272250
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that the debug settings are in a struct, use struct tags to set
the usage messages and use reflection to populate debugtab,
much like we did for the Flag struct.
Change-Id: Id2ba30c30a9158c062527715a68bf4dd94679457
Reviewed-on: https://go-review.googlesource.com/c/go/+/272247
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The debug table is not as haphazard as flags, but there are still
a few mismatches between command-line names and variable names.
This CL moves them all into a consistent home (var Debug, like var Flag).
Code updated automatically using the rf command below.
A followup CL will make a few manual cleanups, leaving this CL
completely automated and easier to regenerate during merge
conflicts.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
add main.go var Debug struct{}
mv Debug_append Debug.Append
mv Debug_checkptr Debug.Checkptr
mv Debug_closure Debug.Closure
mv Debug_compilelater Debug.CompileLater
mv disable_checknil Debug.DisableNil
mv debug_dclstack Debug.DclStack
mv Debug_gcprog Debug.GCProg
mv Debug_libfuzzer Debug.Libfuzzer
mv Debug_checknil Debug.Nil
mv Debug_panic Debug.Panic
mv Debug_slice Debug.Slice
mv Debug_typeassert Debug.TypeAssert
mv Debug_wb Debug.WB
mv Debug_export Debug.Export
mv Debug_pctab Debug.PCTab
mv Debug_locationlist Debug.LocationLists
mv Debug_typecheckinl Debug.TypecheckInl
mv Debug_gendwarfinl Debug.DwarfInl
mv Debug_softfloat Debug.SoftFloat
mv Debug_defer Debug.Defer
mv Debug_dumpptrs Debug.DumpPtrs
mv flag.go:/parse.-d/-1,/unknown.debug/+2 parseDebug
mv debugtab Debug parseDebug \
debugHelpHeader debugHelpFooter \
debug.go
# Remove //go:generate line copied from main.go
rm debug.go:/go:generate/-+
'
Change-Id: I625761ca5659be4052f7161a83baa00df75cca91
Reviewed-on: https://go-review.googlesource.com/c/go/+/272246
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For #40700
Change-Id: I056cef20a5f071977d0ae589c7a50d5f69af3283
Reviewed-on: https://go-review.googlesource.com/c/go/+/273166
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Now that all flags are in a struct, use struct tags to set the usage messages
and use reflection to walk the struct and register all the flags.
Also move some flag usage back into main.go that shouldn't
come with the rest of flag.go into package base.
Change-Id: Ie655582194906c9ab425c3d01ad8c304bc49bfe0
Reviewed-on: https://go-review.googlesource.com/c/go/+/271668
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 34641 changed the Go runtime to assume GOARM=7 support on Android.
This change completes that by assuming GOARM=7 in the toolchain, fixing
the gotcha of inexplicably slow performance on non-arm64 Android devices.
There is already code in cmd/dist to force GOARM to 7 on GOOS=android. However,
dist is most likely run with GOOS != android.
Change-Id: I5e2bf11c3ecd0f6c193229eaa8ddc570722799d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/272846
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Elias Naur <mail@eliasnaur.com>
When c.elemsize==0 we call raceacquire() and racerelease()
as opposed to calling racereleaseacquire()
The reason for this change is that, when elemsize==0, we don't
allocate a full buffer for the channel. Instead of individual
buffer entries, the race detector uses the c.buf as the only
buffer entry. This simplification prevents us following the
memory model's happens-before rules implemented in racereleaseacquire().
So, instead of calling racereleaseacquire(), we accumulate
happens-before information in the synchronization object associated
with c.buf.
The functionality in this change is implemented in a new function
called racenotify()
Fixes#42598
Change-Id: I75b92708633fdfde658dc52e06264e2171824e51
Reviewed-on: https://go-review.googlesource.com/c/go/+/271987
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Ian Lance Taylor <iant@golang.org>
In the previous CL, I had incorrectly removed one of the error
messages from issue20232.go, because I thought go/constant was just
handling it. But actually the compiler was panicking in nodlit,
because it didn't handle constant.Unknown. So this CL makes it leave
n.Type == nil for unknown constant.Values.
While here, also address #42732 by making sure to report an error
message when origConst is called with an unknown constant.Value (as
can happen when multiplying two floating-point constants overflows).
Finally, add OXOR and OBITNOT to the list of operations to report
errors about, since they're also constant expressions that can produce
a constant with a greater bit length than their operands.
Fixes#42732.
Change-Id: I4a538fbae9b3ac4c553d7de5625dc0c87d9acce3
Reviewed-on: https://go-review.googlesource.com/c/go/+/272928
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The existing code introduces many types in what appears to be an
attempt to avoid allocation when converting formatting argument lists.
Simplify by accepting that allocation is going to happen, especially
when Node itself turns into an interface.
Change-Id: I3c0d45ca01eace4924deb43c0ea7dc6d65943d08
Reviewed-on: https://go-review.googlesource.com/c/go/+/272929
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The goal is to move Node to being an interface and then break
up the one big struct into many implementations.
Step 1 is to convert all current uses of Node to only use methods,
so that the existing algorithms keep working even as the underlying
implementations are adjusted.
Step 0 - this CL - is to add the getters and setters for Step 1.
Change-Id: I0570d8727c3ccb64113627bb9bebcb0dc39da07a
Reviewed-on: https://go-review.googlesource.com/c/go/+/273007
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For the upcoming rewrite to access methods, a few direct accesses
are problematic for the automated tool, most notably direct copies
or use of Node structs as opposed to pointers.
Fix these manually.
Passes toolstash -cmp.
Change-Id: I8bdbb33216737c09e1edda284d5c414422d86284
Reviewed-on: https://go-review.googlesource.com/c/go/+/273006
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
I've wanted a FatalfAt function for a while, but under the old "-l"
suffix naming convention it would have been called "Fatalfl", which is
just atrocious.
Change-Id: If87f692ecdff478769426d4b054ac396e5c1e42e
Reviewed-on: https://go-review.googlesource.com/c/go/+/273013
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The linker already has R_AARCH64_LDST{8,32,64,128}_ABS_LO12_NC, some cgo tests require
R_AARCH64_LDST16_ABS_LO12_NC, this CL adds this relocation type.
Fixes#42660
Change-Id: I9a5120cd872f5095c61175cb602427c6ab3225cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/271017
Reviewed-by: eric fang <eric.fang@arm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: eric fang <eric.fang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: eric fang <eric.fang@arm.com>
Trust: Benny Siegert <bsiegert@gmail.com>
