We downrank untyped constant candidates so that we prefer candidates
whose type matches exactly. However, this was causing builtin
constants like "true" to be outranked by candidates that fuzzily match
"true". Fix by not downranking builtin constants.
Fixesgolang/go#36363.
Change-Id: I14801688c96efdbb7ff9fee69f66028530df984c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/213137
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The initial workspace load was happening when a view was created, in serial.
It should really just be kicked off in a separate goroutine once we create a
new view. Implementing this change required some other significant changes,
particularly the additional work being done by the WorkspacePackageIDs
method.
Some other changes had to be made while debugging. In particular, the
modification to the circular dependencies test was a consequence of
golang/go#36265.
Change-Id: I97586c9574f6c4106172d7983e4c6fad412e6aa1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212102
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
CL 212102 contains a few cleanup-type fixes that are unrelated to the
actual content of that CL. Pull them out to make the diffs simpler.
Change-Id: I6b7e34320f2889d05179c8aeb8cb7f8f4c505a3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212917
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Packages that have already been loaded by gopls are more likely to be
used, and have full type information. Check them for completion
candidates before scanning the disk.
Also, minor bug fixes: add a missing mutex, and use a lower-than-usual
score for typed unimported completions.
Change-Id: I46388802913f9a89342fb47290f704b471154ec0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212860
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In scan implementations, stop after cancellation, and swallow the
context's error for convenience.
In the module implementation specifically, try to avoid scanning if the
cache is enough to satisfy the user. When we do have to scan, prioritize
module dependencies before the whole cache.
Change-Id: I23dc98df016f9fca4f31c7ded3d11bc257c29b94
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212857
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We only need to return a relatively small number of completions to the
user. There's no point continuing once we have those, so switch the
completion functions to be callback-based, and cancel once we've got
what we want.
Change-Id: Ied199fb1f41346819c7237dfed8251fa3ac73ad7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212634
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
I want to stop sorting unimported completions. We still want to show
users something reasonable, so use label as a tiebreaker for score in
the higher level completion function.
To maintain the current sorting, we need to adjust scores by search
depth (height?) for lexical completions. A few tests are really ties,
and need sorting in the test case.
Change-Id: Ie2d09fdcbebf6fda4ab33a2f16c579d12b0f26ad
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212633
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
No point in constructing the defaults in three places.
Change-Id: I2b0776910a933a7250245bd82dc27e63c34df18a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212632
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We have multiple use cases for scanning: goimports, import completion,
and unimported completions. All three need slightly different features,
and the latter have very different performance considerations. Scanning
everything all at once and returning it was not good enough for them.
Instead, design the API as a series of callbacks for each
directory/package: first we discover its existence, then we load its
package name, then we load its exports. At each step the caller can
choose whether to proceed with the package. Import completion can stop
before loading exports, goimports can apply its directory name
heuristics, and in the future we'll be able to stop the scan short once
we've found all the results we want for completions.
I don't intend any significant changes here but there may be some little
ones around the edges.
Change-Id: I39c3aa08cc0e4793c280242c342770f62e101364
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212631
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Unimported completions are always low-priority. If the user already
has 100 completion options, the unimported ones are probably not useful.
There's no point in calculating any of them.
Also, only do unimported completions for package members when they're
enabled. Oops.
Change-Id: I7535a22ad56bed869dceb6cd0ffdfc6390cf8eb5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212629
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The metadata for the workspace packages may not be available when we
need it, so we should allow loading a single package ID. This can be
improved in follow-up CLs by consolidating the individual IDs into one
call to packages.Load. Some adjustments from CL 212102 were split out
into this CL.
Change-Id: I173a79a3cb136530bc99d093f1c2be189eac8ce2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212628
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change cleans up the structure of the Options struct in order to
clearly delineate which options should be configurable for the user.
Follow-up work is needed to refactor the completion options to fit into
this structure, as well as to make sure that the name of the field is
the name of the setting. This will make it easier to generate markdown
documentation from the code.
Also, remove options that are no longer in-use and mark them as
deprecated.
Change-Id: Ib34ae25789e21b76077a564601e487fbebfc5f48
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212519
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Our current implementation isn't robust, and it doesn't seem worth it to
invest significant effort in improving it when this library exists.
Also, make the protocol part of the default URL regex non-optional, as
the alternative is that any string of the format "foo.bar" will appear
to be a link.
Updates golang/go#33505
Change-Id: Ia430a1c193eded394f8af12050bdd4dc2a9ccc94
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212517
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
VSCode doesn't like (read: ignores) candidates whose filterText begins
with "&", so trim it off.
I also tweaked "addressed" candidates to include the "&" prefix in the
item label as well so the user can see what they will get.
Change-Id: I85840d036e379a202b72e28c5257807a069ae45d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212406
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We now support taking the address of objects to make better completion
candidates. For example:
i := 123
var p *int = <> // now you get a candidate for "&i"
This required that we track addressability better, particularly when
searching for deep candidates. Now each candidate knows if it is
addressable, and the deep search propagates addressability to child
candidates appropriately.
The basic propagation logic is:
- In-scope *types.Var candidates are addressable. This handles your
basic "foo" variable whose address if "&foo".
- Surrounding selector is addressable based on type checker info. This
knows "foo.bar.<>" is addressable but "foo.bar().<>" isn't
- When evaluating deep completions, fields after a function call lose
addressability, but fields after a pointer regain addressability. For
example, "foo.bar()" isn't addressable, but "foo.bar().baz" is
addressable if "bar()" returns a pointer.
Fixesgolang/go#36132.
Change-Id: I6a8659eb8c203262aedf86844ac39a2d1e81ecc4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212399
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the start of a significant refactoring to implementations,
references, and rename (i.e. everything that searches across
packages). The main goal of the refactoring is to push the package
variant logic from internal/lsp into internal/source so that all users
of source benefit, not just internal/lsp. It also makes it easier to
write tests for various cases because the source tests invoke the
source package directly (so previously did not include all the package
variants).
Currently source.Identifer() handles lots of disparate use cases.
Things like definition and hover don't care about package variants but
do care about other random bits of info that may not apply to
implementations or references. So, I'm splitting implementations out
from source.Identifier. As I work through references and rename
hopefully things will end up separated into smaller chunks.
I also improved implementation deduping to happen earlier. I thought I
could dedupe using obj.Pos(), but mirror objects in package variants
have different positions (suggesting they aren't reusing the
same *ast.File). Instead I used token.Position to dedupe.
Change-Id: I81c2b3ec33bf12640accb852be9ecdea4aa24d69
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211718
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Make the score and import info be fields on "candidate" since they are
properties of the candidate. There shouldn't be a functional change
here; I'm just consolidating things in preparation for an additional
piece of candidate metadata.
Change-Id: I4c7c8ef40e8e5db7b52691cca21490ba13c17642
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212398
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the enclosing value spec specifies a type on the LHS, we now prefer
completions of that type on the RHS. For example:
i := 123
var foo int = // prefer "i" since we know we want an int
I also added a special case to lexical() to know that we can't offer
objects defined on the LHS as completions on the RHS. For example:
var foo int = // don't offer "foo" as completion
Change-Id: I8e24245a2bc86a29887360e7f642a4cbb87fa6ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212401
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change eliminates the extra step of calling GetFile on the view and
getting the FileHandle from the snapshot. It also eliminiates the
redundant source.File type. Follow up changes will clean up the file
kind handling, since it still exists on the fileBase type.
Change-Id: I635ab8632821b36e062be5151eaab425a5698f60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
There is an issue when highlighting a single character identifier if the cursor is on the right of it. This problem
is a result of an assumption made in astutil.PathEnclosingInterval relating to the arguments passed in. Specifically,
if start==end, the 1-char interval following start is used instead. As a result, we might not get an exact match
so we should check the 1-char interval to the left of the passed in position to see if that is an exact match.
Updates golang/go#34496
Change-Id: If689fdf695df6ec1bc1935088e50d3de055bd5db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212137
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL adds a "disableTempModfile" boolean that can be turned on or off.
While we are adding support for go.mod files in gopls, this flag will allow
users to opt out of using the -modfile flag that is enabled in Go 1.14. This
flag might be removed at a future point, the decision still needs to be made.
Updates golang/go#31999
Change-Id: Ic90229333e988fcc6d461ab1ee47bce1114bd965
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212139
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The import cycle not allowed error should be returned as a ListError not
an UnknownError.
Fixesgolang/go#35964
Change-Id: Ibc575f92d926ff715c0da67a4fceda05badcc652
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212138
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Eliminate the file watcher, since it led to a lot of confusion and
difficulty reasoning about the flow of a file action. This change splits
a file invalidation into the two logical steps - 1) things that affect
the overlay, and 2) things that affect the view. It is based on top of
CL 211757, so the diffs will look better once that CL is merged.
Change-Id: I277475569b61f3c80feaa6b6fe457b4bace82e35
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In the upcoming Go 1.14 release, there is an introduction of the -modfile
flag which allows a user to run a go command but choose where to direct the
go.mod file updates. The information about this can be found here: golang/go#34506.
This change starts setting up the infrastructure to handle the seperate modfile
rather than keep changing a user's go.mod file. To support versions of Go that are
not 1.14, we run a modified "go list" command that checks the release tags to see
if 1.14 is contained.
Updates golang/go#31999
Change-Id: Icb71b6402ec4fa07e5f6f1a63954c25520e860b0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211538
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Clear out a few things I noticed aren't really used anymore.
Change-Id: I03f955015632197b56230ae0443cfb3871b54db2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211717
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change fixes the link anchors for fields within a struct or
composite literal by getting the enclosing types.Type.
Fixesgolang/go#36138
Change-Id: I534a900fad6fa6fa1b1acaa5a63ca264c5d34c39
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211582
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Generally speaking, if the imports package can operate on a file, we can
assume that it's in good enough shape for the rest of our work. That
means it's important we run imports first. On one code path, we weren't.
Fixesgolang/go#36162.
Change-Id: I750aff31e0c3706aeb798ceb60c35ea17ba95943
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211580
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We weren't returning promoted methods as implementations when the
promoted method was defined in a different package than the type
implementing the interface.
Fix by properly mapping the implementer types.Object to its containing
source.Package.
I generalized the implementations() result to just contain the
implementer objects and their containing package. This allowed me to
get rid of some result prep code in Implementation().
Fixesgolang/go#35972.
Change-Id: I867f2114c34e2ad39515ee3c8b6354c1cd35f7af
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210280
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In a previous change I inadvertently added completion candidates like:
var f func(int)
f = <> // useless candidate "func(int)(<>)"
Ignoring the fact it is a syntax error without more parens around the
signature, it isn't a useful candidate because you don't need to cast
when assigning a named signature type to an unnamed type.
Change-Id: Ic261817af344ee47193240a11dca5d3a32cbd293
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211319
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the cursor is within an argument that is within a callExpr which is
in a return statement, we only want it to highlight the ident that the cursor
is in. We do not want it to highlight the entire function.
Updates golang/go#34496
Change-Id: If4025660a99fd5df90098e0560a5e9e7260e33c8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211338
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Created an analogous data structure for go.mod files when we parse them
using the golang.org/x/mod package. Gopls can now access the data
within a go.mod file using a parseModHandle and the corresponding
parseModData object. This will help down the road when it is time
to implement the lsp functions for go.mod files.
Updates golang/go#31999
Change-Id: Ibd4d64569bbe3df61b203490b63399d479e7d794
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211303
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The current handling of error messages did not address the case that a
user may have multiple directories listed in their GOPATH.
Fixesgolang/go#36120
Change-Id: I8e68a45d3dd902975a0ccf4177ec2698accdf69d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211304
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the expected type is a basic type, we will now offer a
corresponding type conversion candidate. For example:
var foo int64
foo = // offer "int64(<>)" as a candidate
The type conversion candidate will be ranked below matching concrete
candidates but above the sea of non-matching candidates.
This change broke almost every completion test. I added a new
completion option for literal candidates so tests can selectively ask
for literal completions.
Updates golang/go#36015.
Change-Id: I63fbdb33436d662a666c1ffd3b2d918d840dccc7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210288
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change refactors some of the logic that builds a link anchor for
a given symbol, pushing the actual Link into the HoverInformation struct.
This is necessary because type information is needed to build up that
link in certain cases, like methods.
The last step will be to correctly display struct fields.
Updates golang/go#34240Fixesgolang/go#36031
Change-Id: I7f989faddbaa07f91838a870b4477bf78ce8ddf7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210201
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Having nil ranked normally causes it to show up as the top candidate
in cases like:
context.WithCancel(<>) // "nil" shows up before "context.Background()"
"context.Background()" gets a slight score penalty since it is a deep
completion, so "nil" is ranked highest.
Sometimes you do want "nil", but it's such a short identifier you
probably aren't leaning too heavily on autocompletion. I think it
makes sense to optimize for the case when you want something non-nil.
Change-Id: I537927db2b573535e751380c4cba5c9873dfe524
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210539
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Cache delivered diagnostics on the server so that we can determine if
they should be resent. To be careful about this, we only reuse cached
diagnostics if they are for a greater version, or if we don't know
the file's version and it is unchanged.
Fixesgolang/go#32443
Change-Id: I4ba22d85e5b21a8ad6cc62f74cd83c07d3c220cf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208261
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change is the next step in unification of text synchronization
methods. The logic really belongs in the internal/lsp/cache package
rather than the internal/lsp package.
Pulled out a function to run diagnostics on a file (diagnostics are still
run async).
Change-Id: I5e237411a02af210ad386b37a6c2aa62ef723567
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210784
Reviewed-by: Heschi Kreinick <heschi@google.com>
We previously searched the reverse dependencies of the "widest"
package that contained out starting identifier, but if our package has
tests then the widest package is the ".test" variant, and it has no
reverse dependencies. Fix by searching through all of the packages
that contain our starting identifier.
For example:
-- foo/foo.go --
package foo
func Foo() {}
-- foo/foo_test.go --
package foo
func TestFoo(t *testing.T) {}
-- bar/bar.go --
import "foo"
func _() {
foo.Foo()
}
We would start searching from the foo.test variant, but we wouldn't
search package bar at all because bar does not import foo.test, it
imports plain foo. Now we search from both foo and foo.test (you still
need search foo.test to find references within foo_test.go).
Fixesgolang/go#35936.
Change-Id: I5fd2f7bb130a421ed6fad92da11179995c99a2cf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL teaches lsp to report `**T` instead of `**invalid type`,
`func (badParam) badResult` instead of `func (invalid type) invalid type`, etc.
To do that, we need to detect "invalid type" inside any part of a type.
I've added typeIsValid() function for that.
To simplify type formating code in resolveInvalid(), formatNode
function is added that can also format *ast.StarExpr (of any depth).
Since we already used AST printer in the same file, I
added formatNode function that is now used in both places.
While at it, replaced bytes.Buffer to strings.Builder there.
Change-Id: I3bb84c58c417b175cceefb410e238c48425f7cee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210357
Run-TryBot: Iskander Sharipov <quasilyte@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We previously only searched for implementations of the object we found
in the "widest" package variant. We instead need to search all
variants because each variant is type checked separately, and
implementations can be located in packages associated with different
variants.
For example, say you have:
-- foo/foo.go --
package foo
type Foo int
type Fooer interface { Foo() Foo }
-- foo/foo_test.go --
package foo
func TestFoo(t *testing.T) {}
-- bar/bar.go --
package bar
import "foo"
type impl struct {}
func (impl) Foo() foo.Foo { return 0 }
When you run find-implementations on the Fooer interface, we
previously would start from the (widest) foo.test's Fooer named
type. Unfortunately bar imports foo, not foo.test, so bar.impl
does not implement foo.test.Fooer. The specific reason is that
bar.impl.Foo returns foo.Foo, whereas foo.test.Fooer.Foo returns
foo.test.Foo, which are distinct *types.Named objects.
Starting our search instead from foo.Fooer resolves this issue.
However, we also need to search from foo.test.Fooer so we match any
implementations in foo_test.go.
Change-Id: I0b0039c98925410751c8f643c8ebd185340e409f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210459
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This should provide simple name completions for comments
above exported variables.
Can be activated with `ctrl+space` within a comment.
Pretty new, so all help is welcome.
Fixes#34010
Change-Id: I1c8f71baa3beaa22ec5fd9fd4a531284a8d125f3
GitHub-Last-Rev: a9868eb69dc587cb4579268b2c3ae46932702641
GitHub-Pull-Request: golang/tools#166
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197879
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
