Mkdir and OpenFile call Chmod internally on *BSD and Solaris,
because these OSes don't handle the sticky bit correctly.
However Chmod's error should be ignored. It shouldn't hide
the fact that a file itself is created.
Fixes#8383
Change-Id: Ia2e0b2ba72712d73a0a48ba5a263432e0fff31a5
Reviewed-on: https://go-review.googlesource.com/2057
Reviewed-by: Russ Cox <rsc@golang.org>
- renamed (existing) Mpint -> Mpfix
- defined (new) Mpint using big.Int
- modified funcs mpxxx operating on new Mpint
- renamed funcs mpxxx -> _mpxxx if still needed with Mpfix
- left old (possibly unused) code in place for comparison
Passes all.bash.
Change-Id: I1fc7bba7dc4b6386f2f0950d745cec17c1e67615
cmd/internal/gc: renamed Mpint -> Mpfix
Change-Id: Ia06aeae1081ef29d5ad9b711fb57e4c5579ce29b
Reviewed-on: https://go-review.googlesource.com/7830
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, we only exit the getfull barrier if there is work on the
full list, even though the exit path will take work from either the
full or partial list. Change this to exit the barrier if there is work
on either the full or partial lists.
I believe it's currently safe to check only the full list, since
during mark termination there is no reason to put a workbuf on a
partial list. However, checking both is more robust.
Change-Id: Icf095b0945c7cad326a87ff2f1dc49b7699df373
Reviewed-on: https://go-review.googlesource.com/7840
Reviewed-by: Rick Hudson <rlh@golang.org>
The barrier in gcDrain does not account for concurrent gcDrainNs
happening in gchelpwork, so it can actually return while there is
still work being done. It turns out this is okay, but for subtle
reasons involving gcDrainN always being run on the system
stack. Document these reasons.
Change-Id: Ib07b3753cc4e2b54533ab3081a359cbd1c3c08fb
Reviewed-on: https://go-review.googlesource.com/7736
Reviewed-by: Rick Hudson <rlh@golang.org>
Make mask uint32, and move down one line to match atomic_arm64.go.
Change-Id: I4867de494bc4076b7c2b3bf4fd74aa984e3ea0c8
Reviewed-on: https://go-review.googlesource.com/7854
Reviewed-by: Russ Cox <rsc@golang.org>
Also clean up code a little.
Change-Id: I23b7d2b7871b31e0974f1305e54f0c18dcab05d9
Reviewed-on: https://go-review.googlesource.com/7746
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Rob Pike <r@golang.org>
The ProgInfo is loaded many times during each analysis pass.
Load it once at the beginning (in Flowstart if using that, or explicitly,
as in plive.go) and then refer to the cached copy.
Removes many calls to proginfo.
Makes Prog a little bigger, but the previous CL more than compensates.
Change-Id: If90a12fc6729878fdae10444f9c3bedc8d85026e
Reviewed-on: https://go-review.googlesource.com/7745
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
An interface{} is more in the spirit of the original union.
By my calculations, on 64-bit systems this reduces
Addr from 120 to 80 bytes, and Prog from 592 to 424 bytes.
Change-Id: I0d7b0981513c2a3c94c9ac76bb4f8816485b5a3c
Reviewed-on: https://go-review.googlesource.com/7744
Reviewed-by: Rob Pike <r@golang.org>
We're skating on thin ice, and things are finally starting to melt around here.
(I want to avoid the debugging session that will happen when someone
uses atomicand8 expecting it to be atomic with respect to other operations.)
Change-Id: I254f1582be4eb1f2d7fbba05335a91c6bf0c7f02
Reviewed-on: https://go-review.googlesource.com/7861
Reviewed-by: Minux Ma <minux@golang.org>
I think the file ended up in the order of the typedefs instead of the
order of the actual struct definitions. You can see where some of
the declarations were because some of the comments didn't move.
Put things back in the original order.
Change-Id: I0e3703008278b084b632c917cfb73bc81bdd4f23
Reviewed-on: https://go-review.googlesource.com/7743
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This allows gins to let Naddr fill in p.From and p.To directly,
avoiding the zeroing and copying of a temporary.
Change-Id: I96d120afe266e68f94d5e82b00886bf6bd458f85
Reviewed-on: https://go-review.googlesource.com/7742
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This way the error messages will show the original file name
in addition to the bootstrap file name, so that you have some
chance of making the correction in the original instead of the copy
(which will be blown away).
Before:
/Users/rsc/g/go/pkg/bootstrap/src/bootstrap/5g/gsubr.go:863: undefined: a
After:
/Users/rsc/g/go/src/cmd/5g/gsubr.go:860[/Users/rsc/g/go/pkg/bootstrap/src/bootstrap/5g/gsubr.go:863]: undefined: a
Change-Id: I8d6006abd9499edb16d9f27fe8b7dc6cae143fca
Reviewed-on: https://go-review.googlesource.com/7741
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
To reduce lock contention in this mode, makes persistent allocation state per-P,
which means at most 64 kB overhead x $GOMAXPROCS, which should be
completely tolerable.
Change-Id: I34ca95e77d7e67130e30822e5a4aff6772b1a1c5
Reviewed-on: https://go-review.googlesource.com/7740
Reviewed-by: Rick Hudson <rlh@golang.org>
This is a follow-up to review comments on CL 7696.
I believe that this includes the first regular Go test in the compiler.
No functional changes. Passes toolstash -cmp.
Change-Id: Id45f51aa664c5d52ece2a61cd7d8417159ce3cf0
Reviewed-on: https://go-review.googlesource.com/7820
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The body tag in the pprof template was misplaced.
Change-Id: Icd7948b358f52df1acc7e033ab27a062990ef977
Reviewed-on: https://go-review.googlesource.com/7795
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL updates a TODO on a condition excluding a lot of tests on
android, clarifying what needs to be done. Several of the tests should
be turned off, for example anything depending on the Go tool, others
should be enabled. (See #8345, comment 3 for more details.)
Also add iOS, which has the same set of restrictions.
Tested manually on linux/amd64, darwin/amd64, android/arm, darwin/arm.
Updates #8345
Change-Id: I147f0a915426e0e0de9a73f9aea353766156609b
Reviewed-on: https://go-review.googlesource.com/7734
Reviewed-by: Burcu Dogan <jbd@google.com>
CL 7697 caused doasm failures on 386:
runtime/append_test.go:1: doasm: notfound ft=2 tt=20 00112 (runtime/iface_test.go:207) CMPL $0, BX 2 20
I think that this should be fixed in liblink,
but in the meantime, work around the problem
by instead generating CMPL BX, $0.
Change-Id: I9c572f8f15fc159507132cf4ace8d7a328a3eb4a
Reviewed-on: https://go-review.googlesource.com/7810
Reviewed-by: Keith Randall <khr@golang.org>
Some type assertions of the form _, ok := i.(T) allow efficient inlining.
Such type assertions commonly show up in type switches.
For example, with this optimization, using 6g, the length of
encoding/binary's intDataSize function shrinks from 2224 to 1728 bytes (-22%).
benchmark old ns/op new ns/op delta
BenchmarkAssertI2E2Blank 4.67 0.82 -82.44%
BenchmarkAssertE2T2Blank 4.38 0.83 -81.05%
BenchmarkAssertE2E2Blank 3.88 0.83 -78.61%
BenchmarkAssertE2E2 14.2 14.4 +1.41%
BenchmarkAssertE2T2 10.3 10.4 +0.97%
BenchmarkAssertI2E2 13.4 13.3 -0.75%
Change-Id: Ie9798c3e85432bb8e0f2c723afc376e233639df7
Reviewed-on: https://go-review.googlesource.com/7697
Reviewed-by: Keith Randall <khr@golang.org>
This is preliminary cleanup for another change.
No functional changes. Passes toolstash -cmp.
Change-Id: I11d562fbd6cba5c48d9636f3149e210e5f5308ad
Reviewed-on: https://go-review.googlesource.com/7696
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
The distinction between gcWorkProducer and gcWork (producer and
consumer) is not serving us as originally intended, so merge these
into just gcWork.
The original intent was to replace the currentwbuf cache with a
gcWorkProducer. However, with gchelpwork (aka mutator assists),
mutators can both produce and consume work, so it will make more sense
to cache a whole gcWork.
Change-Id: I6e633e96db7cb23a64fbadbfc4607e3ad32bcfb3
Reviewed-on: https://go-review.googlesource.com/7733
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently markroot fetches the wbuf to fill from the per-M wbuf
cache. The wbuf cache is primarily meant for the write barrier because
it produces very little work on each call. There's little point to
using the cache in mark root, since each call to markroot is likely to
produce a large amount of work (so the slight win on getting it from
the cache instead of from the central wbuf lists doesn't matter), and
markroot does not dispose the wbuf back to the cache (so most markroot
calls won't get anything from the wbuf cache anyway).
Instead, just get the wbuf from the central wbuf lists like other work
producers. This will simplify later changes.
Change-Id: I07a18a4335a41e266a6d70aa3a0911a40babce23
Reviewed-on: https://go-review.googlesource.com/7732
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently, the GC's concurrent mark phase runs on the system
stack. There's no need to do this, and running it this way ties up the
entire M and P running the GC by preventing the scheduler from
preempting the GC even during concurrent mark.
Fix this by running concurrent mark on the regular G stack. It's still
non-preemptible because we also set preemptoff around the whole GC
process, but this moves us closer to making it preemptible.
Change-Id: Ia9f1245e299b8c5c513a4b1e3ef13eaa35ac5e73
Reviewed-on: https://go-review.googlesource.com/7730
Reviewed-by: Rick Hudson <rlh@golang.org>
"Sync" is not very informative. What's being synchronized and with
whom? Update this comment to explain what we're really doing: enabling
write barriers.
Change-Id: I4f0cbb8771988c7ba4606d566b77c26c64165f0f
Reviewed-on: https://go-review.googlesource.com/7700
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we harvestwbufs the moment we enter the mark phase, even
before starting the world again. Since cached wbufs are only filled
when we're in mark or mark termination, they should all be empty at
this point, making the harvest pointless. Remove the harvest.
We should, but do not currently harvest at the end of the mark phase
when we're running out of work to do.
Change-Id: I5f4ba874f14dd915b8dfbc4ee5bb526eecc2c0b4
Reviewed-on: https://go-review.googlesource.com/7669
Reviewed-by: Rick Hudson <rlh@golang.org>
One of my earlier versions of finer-grained select locking
failed on this test. If you just naively lock and check channels
one-by-one, it is possible that you skip over ready channels.
Consider that initially c1 is ready and c2 is not. Select checks c2.
Then another goroutine makes c1 not ready and c2 ready (in that order).
Then select checks c1, concludes that no channels are ready and
executes the default case. But there was no point in time when
no channel is ready and so default case must not be executed.
Change-Id: I3594bf1f36cfb120be65e2474794f0562aebcbbd
Reviewed-on: https://go-review.googlesource.com/7550
Reviewed-by: Russ Cox <rsc@golang.org>
Just so that we notice in the future if another hash function is added
without updating this utility function, make it panic when passed an
unknown handshake hash function. (Which should never happen.)
Change-Id: I60a6fc01669441523d8c44e8fbe7ed435e7f04c8
Reviewed-on: https://go-review.googlesource.com/7646
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Joël Stemmer <stemmertech@gmail.com>
crypto/rand.Reader doesn't ensure that short reads don't happen. This
change contains a couple of fixups where io.ReadFull wasn't being used
with it.
Change-Id: I3855b81f5890f2e703112eeea804aeba07b6a6b8
Reviewed-on: https://go-review.googlesource.com/7645
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
For example, "GOARCH=sparc go build -compiler=gccgo" should not crash
merely because the architecture character for sparc is not known.
Change-Id: I18912c7f5d90ef8f586592235ec9d6e5053e4bef
Reviewed-on: https://go-review.googlesource.com/7695
Reviewed-by: Russ Cox <rsc@golang.org>
The value in question is really a bit pattern
(a pointer with extra bits thrown in),
so treat it as a uintptr instead, avoiding the
generation of a write barrier when there
might not be a p.
Also add the obligatory //go:nowritebarrier.
Change-Id: I4ea097945dd7093a140f4740bcadca3ce7191971
Reviewed-on: https://go-review.googlesource.com/7667
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The GC assumes that there will be no asynchronous write barriers when
the world is stopped. This keeps the synchronization between write
barriers and the GC simple. However, currently, there are a few places
in runtime code where this assumption does not hold.
The GC stops the world by collecting all Ps, which stops all user Go
code, but small parts of the runtime can run without a P. For example,
the code that releases a P must still deschedule its G onto a runnable
queue before stopping. Similarly, when a G returns from a long-running
syscall, it must run code to reacquire a P.
Currently, this code can contain write barriers. This can lead to the
GC collecting reachable objects if something like the following
sequence of events happens:
1. GC stops the world by collecting all Ps.
2. G #1 returns from a syscall (for example), tries to install a
pointer to object X, and calls greyobject on X.
3. greyobject on G #1 marks X, but does not yet add it to a write
buffer. At this point, X is effectively black, not grey, even though
it may point to white objects.
4. GC reaches X through some other path and calls greyobject on X, but
greyobject does nothing because X is already marked.
5. GC completes.
6. greyobject on G #1 adds X to a work buffer, but it's too late.
7. Objects that were reachable only through X are incorrectly collected.
To fix this, we check the invariant that no asynchronous write
barriers happen when the world is stopped by checking that write
barriers always have a P, and modify all currently known sources of
these writes to disable the write barrier. In all modified cases this
is safe because the object in question will always be reachable via
some other path.
Some of the trace code was turned off, in particular the
code that traces returning from a syscall. The GC assumes
that as far as the heap is concerned the thread is stopped
when it is in a syscall. Upon returning the trace code
must not do any heap writes for the same reasons discussed
above.
Fixes#10098Fixes#9953Fixes#9951Fixes#9884
May relate to #9610#9771
Change-Id: Ic2e70b7caffa053e56156838eb8d89503e3c0c8a
Reviewed-on: https://go-review.googlesource.com/7504
Reviewed-by: Austin Clements <austin@google.com>
Some versions of libc, in this case Android's bionic, point environ
directly at the envp memory.
https://android.googlesource.com/platform/bionic/+/master/libc/bionic/libc_init_common.cpp#104
The Go runtime does something surprisingly similar, building the
runtime's envs []string using gostringnocopy. Both libc and the Go
runtime reusing memory interacts badly. When syscall.Setenv uses cgo
to call setenv(3), C modifies the underlying memory of a Go string.
This manifests on android/arm. With GOROOT=/data/local/tmp, a
runtime test calls syscall.Setenv("/os"), resulting in
runtime.GOROOT()=="/os\x00a/local/tmp/goroot".
Avoid this by copying environment string memory into Go.
Covered by runtime.TestFixedGOROOT on android/arm.
Change-Id: Id0cf9553969f587addd462f2239dafca1cf371fa
Reviewed-on: https://go-review.googlesource.com/7663
Reviewed-by: Keith Randall <khr@golang.org>
