This worked in Go 1.4 but was lost in the "pure Go" lookup
routines substituted late in the Go 1.5 cycle.
Fixes#12263.
Change-Id: I77ec9d97cd8e67ace99d6ac965e5bc16c151ba83
Reviewed-on: https://go-review.googlesource.com/13915
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Setgroups with zero-length groups is no-op for changing groups and
supposed to be used only for determining curent groups length. Also
because we deny setgroups by default if use GidMappings we have
unnecessary error from that no-op syscall.
Change-Id: I8f74fbca9190a3dcbbef1d886c518e01fa05eb62
Reviewed-on: https://go-review.googlesource.com/13938
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I63bf6d2fdf41b49ff8783052d5d6c53b20e2f050
Reviewed-on: https://go-review.googlesource.com/13760
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
For ARM machines, the assembler supports list of registers
operands such as [R1,R2].
A list missing a ']' results in the parser issuing many errors
and consuming all the tokens. At EOF (i.e. end of the line),
it still loops.
Normally, a counter is maintained to make sure the parser
stops after 10 errors. However, multiple errors occuring on the
same line are simply ignored. Only the first one is reported.
At most one error per line is accounted.
Missing ']' in a register list therefore results in an
infinite loop.
Fixed the parser by explicitly checking for ']' to interrupt
this loops
In the operand tests, also fixed a wrong entry which I think was
not set on purpose (but still led to a successful result).
Fixes#11764
Change-Id: Ie87773388ee0d21b3a2a4cb941d4d911d0230ba4
Reviewed-on: https://go-review.googlesource.com/13920
Reviewed-by: Rob Pike <r@golang.org>
I noticed that they were unimplemented on arm64 but then that they were
in fact not used at all.
Change-Id: Iee579feda2a5e374fa571bcc8c89e4ef607d50f6
Reviewed-on: https://go-review.googlesource.com/13951
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Accepting a request with a nil body was never explicitly supported but
happened to work in the past.
This doesn't happen in most cases because usually people pass
a Server's incoming Request to the ReverseProxy's ServeHTTP method,
and incoming server requests are guaranteed to have non-nil bodies.
Still, it's a regression, so fix.
Fixes#12344
Change-Id: Id9a5a47aea3f2875d195b66c9a5f8581c4ca2aed
Reviewed-on: https://go-review.googlesource.com/13935
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Not needed anymore since go/types is always built against the current
standard library.
Fixes#11538.
Change-Id: I2f07d73703f4e5661c4b5df5d487939dcf530b43
Reviewed-on: https://go-review.googlesource.com/13897
Reviewed-by: Alan Donovan <adonovan@google.com>
byte is unsigned so the comparison against zero is always true.
Change-Id: I8fa60245972be362ae920507a291f92c0f9831ad
Reviewed-on: https://go-review.googlesource.com/13941
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing implementation fails to determine the correct time zone
abbreviations when the display language is non-English. This change adds
support for localized time zone names (standard- and daylightname)
by using the function RegLoadMUIString.
Fixes#12015
Change-Id: Ic0dc89c50993af8f292b199c20bc5932903e7e87
Reviewed-on: https://go-review.googlesource.com/13854
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
s is a uint32 and can never be zero. It's max value is already tested
against sig.wanted, whose size is derived from _NSIG. This also
matches the test in signal_enable.
Fixes#11282
Change-Id: I8eec9c7df8eb8682433616462fe51b264c092475
Reviewed-on: https://go-review.googlesource.com/13940
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
No longer used after previous hashmap change.
Change-Id: I558470f872281e84a78406132df4e391d077b833
Reviewed-on: https://go-review.googlesource.com/13785
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If an exported function has named return variables, then show the names
as comments in the return struct we create in the header file.
Example here:
https://groups.google.com/forum/#!topic/golang-nuts/r393ne4zIfY
Change-Id: I21fb4ca2673f6977bec35ccab0cef7d42b311f96
Reviewed-on: https://go-review.googlesource.com/13061
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously t.zero always pointed to runtime.zerovalue. Change the hashmap code
to always return a runtime pointer directly, and change that pointer to point
to a larger buffer if one is needed.
(It might be better to only copy from the pointer returned by the mapaccess
functions when the value type is small enough and have the compiler insert
explicit zeroing for larger value types, but I tried and failed to do this).
This removes all uses of the zero field of the type data; the field itself can
be removed in a separate change.
Fixes#11491
Change-Id: I5b81752ff4067d74a5a281c41e88f151bae0171e
Reviewed-on: https://go-review.googlesource.com/13784
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This was always a bit confusing, but it also fixes a problem: runtime.firstmoduledata
was always overridden in the linker to be a local symbol but cmd/internal/obj had
already rewritten code accessing it to access it via the GOT. This works on amd64, but
causes link failures on other platforms (e.g. arm64).
Change-Id: I9b8153af74b4d0f092211d63a000d15818f39773
Reviewed-on: https://go-review.googlesource.com/13786
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The issue 12226 has been caused by the allocation of the same register
for the equality check of two byte values. The code in cgen.go freed the
register for the second operand before the allocation of the register
for the first operand.
Fixes#12226
Change-Id: Ie4dc33a488bd48a17f8ae9b497fd63c1ae390555
Reviewed-on: https://go-review.googlesource.com/13771
Reviewed-by: Russ Cox <rsc@golang.org>
A comparison of the form l == r where l is an interface and r is
concrete performs a type assertion on l to convert it to r's type.
However, the compiler fails to zero the temporary where the result of
the type assertion is written, so if the type is a pointer type and a
stack scan occurs while in the type assertion, it may see an invalid
pointer on the stack.
Fix this by zeroing the temporary. This is equivalent to the fix for
type switches from c4092ac.
Fixes#12253.
Change-Id: Iaf205d456b856c056b317b4e888ce892f0c555b9
Reviewed-on: https://go-review.googlesource.com/13872
Reviewed-by: Russ Cox <rsc@golang.org>
nmspinning has a value range of [0, 2^31-1]. Update the comment to
indicate this and fix the comparison so it's not always false.
Fixes#11280
Change-Id: Iedaf0654dcba5e2c800645f26b26a1a781ea1991
Reviewed-on: https://go-review.googlesource.com/13877
Reviewed-by: Minux Ma <minux@golang.org>
gobuf.g is a guintptr, so without hex(), it will be printed as
a decimal, which is not very helpful and inconsistent with how
other pointers are printed.
Change-Id: I7c0432e9709e90a5c3b3e22ce799551a6242d017
Reviewed-on: https://go-review.googlesource.com/13879
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Simplify slice/map literal expressions.
Caught with gofmt -d -s, fixed with gofmt -w -s
Reformatted some expressions to improve readability.
Change-Id: Iaf123e6bd49162ec45c59297ad3b002ca59443bc
Reviewed-on: https://go-review.googlesource.com/13850
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While we're at it, also fix a typo.
Change-Id: Id436f33cffa5683e2a8450cce5b545960cf2877e
Reviewed-on: https://go-review.googlesource.com/13878
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is not a functional change. nr is a uint64 and can never be less
than zero, remove the no-op comparison.
Fixes#11279
Change-Id: Iebb36cc8fe97428b503e65d01b5e67d2b2bc7369
Reviewed-on: https://go-review.googlesource.com/13876
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The nohup command doesn't work in tmux on darwin.
Fixes#5135.
Change-Id: I1c21073d8bd54b49dd6b0bad86ef088d6d8e7a5f
Reviewed-on: https://go-review.googlesource.com/13883
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The URL is shown on go docs and is an eye-sore.
For go1.6.
Change-Id: I8b8ea3751200d06ed36acfe22f47ebb38107f8db
Reviewed-on: https://go-review.googlesource.com/13282
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In short, %c should just give you the next rune, period.
Apparently this is the design. I use the term loosely.
Fixes#12275
Change-Id: I6f30bed442c0e88eac2244d465c7d151b29cf393
Reviewed-on: https://go-review.googlesource.com/13821
Reviewed-by: Andrew Gerrand <adg@golang.org>
All of Go passes. No changes for the text repo.
Fixes#10153
Change-Id: I313369bf471c8974390a6d42075e5c54f6a81750
Reviewed-on: https://go-review.googlesource.com/13667
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
It is already validated by isDoaminName.
Change-Id: I7a955b632a5143e16b012641cf12bad452900753
Reviewed-on: https://go-review.googlesource.com/13789
Reviewed-by: Andrew Gerrand <adg@golang.org>
Add benchmarks for for sparsely escaped and densely escaped strings.
Then speed up the sparse unescaping part heavily by using IndexByte and
copy to skip the parts containing no escaping very fast.
Unescaping densely escaped strings slower because of
the new function call overhead. But sparsely encoded strings are seen
more often in the utf8 enabled web.
We win part of the speed back by looking up entityName differently.
benchmark old ns/op new ns/op delta
BenchmarkEscape 31680 31396 -0.90%
BenchmarkEscapeNone 6507 6872 +5.61%
BenchmarkUnescape 36481 48298 +32.39%
BenchmarkUnescapeNone 332 325 -2.11%
BenchmarkUnescapeSparse 8836 3221 -63.55%
BenchmarkUnescapeDense 30639 32224 +5.17%
Change-Id: If606cb01897a40eefe35ba98f2ff23bb25251606
Reviewed-on: https://go-review.googlesource.com/10172
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current implementations of MarshalJSON and MarshalText use
time.Format which returns a string (converted from a byte slice),
only to convert it back to a byte slice.
Avoid the conversion (and thus an allocation) by directly appending
the formatted time to a preallocated byte slice, using the new
AppendFormat function, introduced in golang.org/cl/1760.
This reduces the allocations done in Marshal[Text|JSON] by 50%.
benchmark old ns/op new ns/op delta
BenchmarkMarshalJSON 626 507 -19.01%
BenchmarkMarshalText 598 511 -14.55%
benchmark old allocs new allocs delta
BenchmarkMarshalJSON 2 1 -50.00%
BenchmarkMarshalText 2 1 -50.00%
benchmark old bytes new bytes delta
BenchmarkMarshalJSON 96 48 -50.00%
BenchmarkMarshalText 96 48 -50.00%
Fixes#11025
Change-Id: I468f78d075a6ecc1cdc839df7fb407fbc6ff2e70
Reviewed-on: https://go-review.googlesource.com/10555
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently an expression like
var v = 0 >> 1000
is rejected by gc with a "stupid shift" error, while gotype
compiles it successfully.
As suggested by gri on the issue tracker, allow an rsh right
operand to be any valid uint value.
Fixes#11328
Change-Id: I6ccb3b7f842338d91fd26ae37dd4fa279d7fc440
Reviewed-on: https://go-review.googlesource.com/13777
Reviewed-by: Robert Griesemer <gri@golang.org>
This updates the big package used by the compiler to match the
public big package which contains some updates and bug fixes.
Obtained by running vendor.bash in the internal/big directory.
No manual changes.
Change-Id: I299aecc6599d4a745a721ce48def32449640dbb2
Reviewed-on: https://go-review.googlesource.com/13815
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When there is no browser available on the system,
we should print the URL instead of failing.
Change-Id: I4a2b099e17609394273eff150062c285d76bbac1
Reviewed-on: https://go-review.googlesource.com/13774
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Even though the umul/uquo functions expect two valid, finite big.Floats
arguments, SetString was calling them with possibly Inf values, which
resulted in bogus return values.
Replace umul and udiv calls with Mul and Quo calls to fix this. Also,
fix two wrong tests.
See relevant issue on issue tracker for a detailed explanation.
Fixes#11341
Change-Id: Ie35222763a57a2d712a5f5f7baec75cab8189a53
Reviewed-on: https://go-review.googlesource.com/13778
Reviewed-by: Robert Griesemer <gri@golang.org>
This is not a functional change.
Also:
- minor cleanups, better comments
- uniform spelling of noun "zeros" (per OED)
Fixes#11277.
Change-Id: I1726f358ce15907bd2410f646b02cf8b11b919cd
Reviewed-on: https://go-review.googlesource.com/11267
Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
I cannot find where it's being used.
This addresses a duplicate symbol issue encountered in golang/go#9327.
Change-Id: I8efda45a006ad3e19423748210c78bd5831215e0
Reviewed-on: https://go-review.googlesource.com/13615
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 9184 changed the runtime and syscall packages to link Solaris binaries
directly instead of using dlopen/dlsym but did not remove the unused (and
now broken) references to dlopen, dlclose, and dlsym.
Fixes#11923
Change-Id: I36345ce5e7b371bd601b7d48af000f4ccacd62c0
Reviewed-on: https://go-review.googlesource.com/13410
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Could go in 1.5, although not critical.
See also #12107
Change-Id: I7f1608b58581d21df4db58f0db654fef79e33a90
Reviewed-on: https://go-review.googlesource.com/13481
Reviewed-by: Dave Cheney <dave@cheney.net>
Even Linux systems may not have _SC_GETPW_R_SIZE_MAX if using a
different libc than glibc (e.g. musl). Instead of having special-cases
for the BSDs, handle -1 correctly by always using a default buffer size.
Fixes#11319.
Change-Id: I8b1b260eb9830e6dbe7667f3f33d115ae4de4ce8
Reviewed-on: https://go-review.googlesource.com/13772
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
This is especially important for LookupAddr, which used to be pure Go
(lightweight, one goroutine per call) and without this CL is now
unconditionally cgo (heavy, one thread per call).
Fixes#12190.
Change-Id: I43436a942bc1838b024225893e156f280a1e80cf
Reviewed-on: https://go-review.googlesource.com/13698
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Go 1.4 and before have always returned DNS names with a trailing dot
for reverse lookups, as they do for basically all other routines returning
DNS names. Go 1.4 and before always implemented LookupAddr using
pure Go (not C library calls).
Go 1.5 added the ability to make a C library call to implement LookupAddr.
Unfortunately the C library call returns a DNS name without a trailing dot
(an unrooted name), meaning that if turn off cgo during make.bash then
you still get the rooted name but with cgo on you get an unrooted name.
The unrooted name is inconsistent with the pure Go implementation
and with all previous Go releases, so change it to a rooted name.
Fixes#12189.
Change-Id: I3d6b72277c121fe085ea6af30e5fe8019fc490ad
Reviewed-on: https://go-review.googlesource.com/13697
Reviewed-by: Rob Pike <r@golang.org>
This was missed when we did the rename months ago
because cmd/vet did not live in the main tree.
Now vet's asmdecl checks will apply to ppc64 assembly too.
Change-Id: I687cba89fef702f29dd118de76a7ca1041c414f6
Reviewed-on: https://go-review.googlesource.com/13677
Reviewed-by: Andrew Gerrand <adg@golang.org>
Tested by hand.
Only lines of code changing are protected by Fieldtrack_enabled > 0,
which is never true in standard Go distributions.
Fixes#12171.
Change-Id: I963b9997dac10829db8ad4bfc97a7d6bf14b55c6
Reviewed-on: https://go-review.googlesource.com/13676
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The text segment starts farther into the binary when using
external linking on the mac. Test and fix.
Fixes#12173.
Change-Id: I1f0c81814bf70cd9decfceac3022784f4608eeef
Reviewed-on: https://go-review.googlesource.com/13672
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Found in a Google program running under the race detector.
No test, but verified that this fixes the race with go run -race of:
package main
import (
"crypto/tls"
"fmt"
"net"
"net/http"
"net/http/httptest"
)
func main() {
for {
ts := httptest.NewTLSServer(http.HandlerFunc(func(rw http.ResponseWriter, r *http.Request) {}))
conf := &tls.Config{} // non-nil
a, b := net.Pipe()
go func() {
sconn := tls.Server(a, conf)
sconn.Handshake()
}()
tr := &http.Transport{
TLSClientConfig: conf,
}
req, _ := http.NewRequest("GET", ts.URL, nil)
_, err := tr.RoundTrip(req)
println(fmt.Sprint(err))
a.Close()
b.Close()
ts.Close()
}
}
Also modified cmd/vet to report the copy-of-mutex bug statically
in CL 13646, and fixed two other instances in the code found by vet.
But vet could not have told us about cloneTLSConfig vs cloneTLSClientConfig.
Confirmed that original report is also fixed by this.
Fixes#12099.
Change-Id: Iba0171549e01852a5ec3438c25a1951c98524dec
Reviewed-on: https://go-review.googlesource.com/13453
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Correct 'an' to 'on' in the comment above the Stable() function.
Change-Id: I714e38b2d3a79dfd539d5368967d1c6b519cb948
Reviewed-on: https://go-review.googlesource.com/13662
Reviewed-by: Rob Pike <r@golang.org>
Fixesgolang/go#12133
CL 13630 fixed the use of a stale reg[] array in the various arch
backends which was causing the check in clearfat to pass
unconditionally on arm64.
With this check fixed, arm64 now considers REGRT1 to always be in use
as it is part of the reserved register set, see arm64/gsubr.go.
However, ppc64 does not consider REGRT1 and REGRT2 to be part of its
reserved set, so its identical clearfat check passes.
This CL removes the Reginuse check inside clearfat as REGRT1 is
guarenteed always be free on arm64.
Change-Id: I4719150d3c3378fae155b863c474529df18d4c17
Reviewed-on: https://go-review.googlesource.com/13650
Reviewed-by: Russ Cox <rsc@golang.org>
Use runtime.GOROOT instead of os.Getenv("GOROOT") to reference
trace-viewer html file. GOROOT env var is not necessary set,
runtime.GOROOT has a default value for such case.
Change-Id: I906a720f6822915bd9575756e6cbf6d622857c2b
Reviewed-on: https://go-review.googlesource.com/13593
Reviewed-by: Russ Cox <rsc@golang.org>
The reg[] array in .../gc is where truth lies. The copy in .../ARCH
is incorrect as it is mostly not updated to reflect regalloc decisions.
This bug was introduced in the rewrite
https://go-review.googlesource.com/#/c/7853/. The new reg[] array was
introduced in .../gc but not all of the uses were removed in the
.../ARCH directories.
Fixes#12133
Change-Id: I6364fc403cdab92d802d17f2913ba1607734037c
Reviewed-on: https://go-review.googlesource.com/13630
Reviewed-by: Russ Cox <rsc@golang.org>
Update #12108
If DUFFZERO is used within a tail call method it will overwrite the
link register.
Change-Id: I6abd2fde0f0ad909ccd55eb119b992673a74f0e2
Reviewed-on: https://go-review.googlesource.com/13570
Reviewed-by: Russ Cox <rsc@golang.org>
p.ImportPath is the directory-derived path (like cmd/go).
p.Name is the actual package name.
Fixes#12089.
Change-Id: Ief76d42a85f811b0dfe2218affb48551527a7d44
Reviewed-on: https://go-review.googlesource.com/13530
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Fixes#12086
Belongs in 1.5
There remains a question of why the Statenames table's elements
are not printed. What purpose does that serve?
Change-Id: I83fd57b81d5e5065c3397a66ed457fc0d1c041bd
Reviewed-on: https://go-review.googlesource.com/13462
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When scanning a hex byte at EOF, the code was ungetting the eof,
which backed up the input and caused double-scanning of a byte.
Delete the call to UnreadRune.
This line appeared in 1.5 for some reason; it was not in 1.4 and
should be removed again for 1.5
Fixes#12090.
Change-Id: Iad1ce8e7db8ec26615c5271310f4b0228cca7d78
Reviewed-on: https://go-review.googlesource.com/13461
Reviewed-by: Andrew Gerrand <adg@golang.org>
Changes the torture test in #12068 from failing about 1/10 times
to not failing in almost 2,000 runs.
This was only happening in -race mode because functions are
bigger in -race mode, so a few of the helpers for heapBitsBulkBarrier
were not being inlined, and they were not marked nosplit,
so (only in -race mode) the write barrier was being preempted by GC,
causing missed pointer updates.
Filed issue #12069 for diagnosis of any other similar errors.
Fixes#12068.
Change-Id: Ic174d9b050ba278b18b08ab0d85a73c33bd5b175
Reviewed-on: https://go-review.googlesource.com/13364
Reviewed-by: Austin Clements <austin@google.com>
Also, crash early on non-Linux SMP ARM systems when GOARM < 7;
without the proper synchronization, SMP cannot work.
Linux is okay because we call kernel-provided routines for
synchronization and barriers, and the kernel takes care of
providing the right routines for the current system.
On non-Linux systems we are left to fend for ourselves.
It is possible to use different synchronization on GOARM=6,
but it's too late to do that in the Go 1.5 cycle.
We don't believe there are any non-Linux SMP GOARM=6 systems anyway.
Fixes#12067.
Change-Id: I771a556e47893ed540ec2cd33d23c06720157ea3
Reviewed-on: https://go-review.googlesource.com/13363
Reviewed-by: Austin Clements <austin@google.com>
Currently, runtime.Goexit() calls goexit()—the goroutine exit stub—to
terminate the goroutine. This *mostly* works, but can cause a
"leftover stack barriers" panic if the following happens:
1. Goroutine A has a reasonably large stack.
2. The garbage collector scan phase runs and installs stack barriers
in A's stack. The top-most stack barrier happens to fall at address X.
3. Goroutine A unwinds the stack far enough to be a candidate for
stack shrinking, but not past X.
4. Goroutine A calls runtime.Goexit(), which calls goexit(), which
calls goexit1().
5. The garbage collector enters mark termination.
6. Goroutine A is preempted right at the prologue of goexit1() and
performs a stack shrink, which calls gentraceback.
gentraceback stops as soon as it sees goexit on the stack, which is
only two frames up at this point, even though there may really be many
frames above it. More to the point, the stack barrier at X is above
the goexit frame, so gentraceback never sees that stack barrier. At
the end of gentraceback, it checks that it saw all of the stack
barriers and panics because it didn't see the one at X.
The fix is simple: call goexit1, which actually implements the process
of exiting a goroutine, rather than goexit, the exit stub.
To make sure this doesn't happen again in the future, we also add an
argument to the stub prototype of goexit so you really, really have to
want to call it in order to call it. We were able to reliably
reproduce the above sequence with a fair amount of awful code inserted
at the right places in the runtime, but chose to change the goexit
prototype to ensure this wouldn't happen again rather than pollute the
runtime with ugly testing code.
Change-Id: Ifb6fb53087e09a252baddadc36eebf954468f2a8
Reviewed-on: https://go-review.googlesource.com/13323
Reviewed-by: Russ Cox <rsc@golang.org>
This makes TestTraceStressStartStop much less flaky.
Running under stress, it changes the failure rate from
above 1/100 to under 1/50000. That very unlikely
failure happens when an unexpected GoSysExit is
written. Not sure how that happens yet, but it is much
less important.
Fixes#11953.
Change-Id: I034671936334b4f3ab733614ef239aa121d20247
Reviewed-on: https://go-review.googlesource.com/13321
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
The old code was only allowing the chars we choose not to escape.
We sometimes prefer to escape chars that do not strictly need it.
Allowing those to be used in RawPath lets people override that
preference, which is in fact the whole point of RawPath (new in Go 1.5).
While we are here, also allow [ ] in RawPath.
This is not strictly spec-compliant, but it is what modern browers
do and what at least some people expect, and the [ ] do not cause
any ambiguity (the usual reason they would be escaped, as they are
part of the RFC gen-delims class).
The argument for allowing them now instead of waiting until Go 1.6
is that this way RawPath has one fixed meaning at the time it is
introduced, that we should not need to change or expand.
Fixes#5684.
Change-Id: If9c82a18f522d7ee1d10310a22821ada9286ee5c
Reviewed-on: https://go-review.googlesource.com/13258
Reviewed-by: Andrew Gerrand <adg@golang.org>
The code in question was added as part of allowing zone identifiers
in IPv6 literals like http://[ipv6%zone]:port/foo, in golang.org/cl/2431.
The old condition makes no sense. It refers to §3.2.1, which is the wrong section
of the RFC, it excludes all the sub-delims, which §3.2.2 (the right section)
makes clear are valid, and it allows ':', which is not actually valid,
without an explanation as to why (because we keep :port in the Host field
of the URL struct).
The new condition allows all the sub-delims, as specified in RFC 3986,
plus the additional characters [ ] : seen in IP address literals and :port suffixes,
which we also keep in the Host field.
This allows mysql://a,b,c/path to continue to parse, as it did in Go 1.4 and earlier.
This CL does not break any existing tests, suggesting the over-conservative
behavior was not intended and perhaps not realized.
It is especially important not to over-escape the host field, because
Go does not unescape the host field during parsing: it rejects any
host field containing % characters.
Fixes#12036.
Change-Id: Iccbe4985957b3dc58b6dfb5dcb5b63a51a6feefb
Reviewed-on: https://go-review.googlesource.com/13254
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Go 1.4 and earlier accepted mysql://x@y(z:123)/foo
and I don't see any compelling reason to break that.
The CL during Go 1.5 that broke this syntax was
trying to fix#11208 and was probably too aggressive.
I added a test case for #11208 to make sure that stays
fixed.
Relaxing the check did not re-break #11208 nor did
it cause any existing test to fail. I added a test for the
mysql://x@y(z:123)/foo syntax being preserved.
Fixes#12023.
Change-Id: I659d39f18c85111697732ad24b757169d69284fc
Reviewed-on: https://go-review.googlesource.com/13253
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Strengthening VerifyHostname exposed the fact that for resumed
connections, ConnectionState().VerifiedChains was not being saved
and restored during the ClientSessionCache operations.
Do that.
This change just saves the verified chains in the client's session
cache. It does not re-verify the certificates when resuming a
connection.
There are arguments both ways about this: we want fast, light-weight
resumption connections (thus suggesting that we shouldn't verify) but
it could also be a little surprising that, if the verification config
is changed, that would be ignored if the same session cache is used.
On the server side we do re-verify client-auth certificates, but the
situation is a little different there. The client session cache is an
object in memory that's reset each time the process restarts. But the
server's session cache is a conceptual object, held by the clients, so
can persist across server restarts. Thus the chance of a change in
verification config being surprisingly ignored is much higher in the
server case.
Fixes#12024.
Change-Id: I3081029623322ce3d9f4f3819659fdd9a381db16
Reviewed-on: https://go-review.googlesource.com/13164
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Prior to this change, broken trailers would be handled by body.Read, and
an error would be returned to its caller (likely a Handler), but that
error would go completely unnoticed by the rest of the server flow
allowing a broken connection to be reused. This is a possible request
smuggling vector.
Fixes#12027.
Change-Id: I077eb0b8dff35c5d5534ee5f6386127c9954bd58
Reviewed-on: https://go-review.googlesource.com/13148
Reviewed-by: Russ Cox <rsc@golang.org>
This change alters the certificate used in many tests so that it's no
longer self-signed. This allows some tests to exercise the standard
certificate verification paths in the future.
Change-Id: I9c3fcd6847eed8269ff3b86d9b6966406bf0642d
Reviewed-on: https://go-review.googlesource.com/13244
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
88e945f introduced a non-speculative double check of the heap trigger
before actually starting a concurrent GC. This was necessary to fix a
race for heap-triggered GC, but broke sysmon-triggered periodic GC,
since the heap check will of course fail for periodically triggered
GC.
Fix this by telling startGC whether or not this GC was triggered by
heap size or a timer and only doing the heap size double check for GCs
triggered by heap size.
Fixes#12026.
Change-Id: I7c3f6ec364545c36d619f2b4b3bf3b758e3bcbd6
Reviewed-on: https://go-review.googlesource.com/13168
Reviewed-by: Russ Cox <rsc@golang.org>
Now that it works we need to turn it back on.
Fixes#10119.
Change-Id: I9c62d3026f7bb62c49a601ad73f33bf655372915
Reviewed-on: https://go-review.googlesource.com/13162
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is just far too slow.
I have a CL for Go 1.6 that makes many of these into internal tests.
That will improve the coverage.
It does not matter much, because basically none of the go command
tests are architecture dependent, so the other builders will catch
any problems.
Fixes freebsd-arm builder.
Change-Id: I8b2f6ac2cc1e7657019f7731c6662dc43e20bfb5
Reviewed-on: https://go-review.googlesource.com/13166
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This works after golang.org/cl/13120 is running on the
coordinator (maybe it already is).
Change-Id: I4053d8e2f32fafd47b927203a6f66d5858e23376
Reviewed-on: https://go-review.googlesource.com/13165
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is what is causing freebsd/arm to crash mysteriously when using cgo.
The bug was introduced in golang.org/cl/4030, which moved this code out
of rt0_go and into its own function. The ARM ABI says that calls must
be made with the stack pointer at an 8-byte boundary, but only FreeBSD
seems to crash when this is violated.
Fixes#10119.
Change-Id: Ibdbe76b2c7b80943ab66b8abbb38b47acb70b1e5
Reviewed-on: https://go-review.googlesource.com/13161
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
When commit 510fd13 enabled assists during the scan phase, it failed
to also update the code in the GC controller that computed the assist
CPU utilization and adjusted the trigger based on it. Fix that code so
it uses the start of the scan phase as the wall-clock time when
assists were enabled rather than the start of the mark phase.
Change-Id: I05013734b4448c3e2c730dc7b0b5ee28c86ed8cf
Reviewed-on: https://go-review.googlesource.com/13048
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
At the start of a GC cycle, the garbage collector computes the assist
ratio based on the total scannable heap size. This was intended to be
conservative; after all, this assumes the entire heap may be reachable
and hence needs to be scanned. But it only assumes that the *current*
entire heap may be reachable. It fails to account for heap allocated
during the GC cycle. If the trigger ratio is very low (near zero), and
most of the heap is reachable when GC starts (which is likely if the
trigger ratio is near zero), then it's possible for the mutator to
create new, reachable heap fast enough that the assists won't keep up
based on the assist ratio computed at the beginning of the cycle. As a
result, the heap can grow beyond the heap goal (by hundreds of megs in
stress tests like in issue #11911).
We already have some vestigial logic for dealing with situations like
this; it just doesn't run often enough. Currently, every 10 ms during
the GC cycle, the GC revises the assist ratio. This was put in before
we switched to a conservative assist ratio (when we really were using
estimates of scannable heap), and it turns out to be exactly what we
need now. However, every 10 ms is far too infrequent for a rapidly
allocating mutator.
This commit reuses this logic, but replaces the 10 ms timer with
revising the assist ratio every time the heap is locked, which
coincides precisely with when the statistics used to compute the
assist ratio are updated.
Fixes#11911.
Change-Id: I377b231ab064946228378fa10422a46d1b50f4c5
Reviewed-on: https://go-review.googlesource.com/13047
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This was useful in debugging the mutator assist behavior for #11911,
and it fits with the other gcpacertrace output.
Change-Id: I1e25590bb4098223a160de796578bd11086309c7
Reviewed-on: https://go-review.googlesource.com/13046
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Proportional concurrent sweep is currently based on a ratio of spans
to be swept per bytes of object allocation. However, proportional
sweeping is performed during span allocation, not object allocation,
in order to minimize contention and overhead. Since objects are
allocated from spans after those spans are allocated, the system tends
to operate in debt, which means when the next GC cycle starts, there
is often sweep debt remaining, so GC has to finish the sweep, which
delays the start of the cycle and delays enabling mutator assists.
For example, it's quite likely that many Ps will simultaneously refill
their span caches immediately after a GC cycle (because GC flushes the
span caches), but at this point, there has been very little object
allocation since the end of GC, so very little sweeping is done. The
Ps then allocate objects from these cached spans, which drives up the
bytes of object allocation, but since these allocations are coming
from cached spans, nothing considers whether more sweeping has to
happen. If the sweep ratio is high enough (which can happen if the
next GC trigger is very close to the retained heap size), this can
easily represent a sweep debt of thousands of pages.
Fix this by making proportional sweep proportional to the number of
bytes of spans allocated, rather than the number of bytes of objects
allocated. Prior to allocating a span, both the small object path and
the large object path ensure credit for allocating that span, so the
system operates in the black, rather than in the red.
Combined with the previous commit, this should eliminate all sweeping
from GC start up. On the stress test in issue #11911, this reduces the
time spent sweeping during GC (and delaying start up) by several
orders of magnitude:
mean 99%ile max
pre fix 1 ms 11 ms 144 ms
post fix 270 ns 735 ns 916 ns
Updates #11911.
Change-Id: I89223712883954c9d6ec2a7a51ecb97172097df3
Reviewed-on: https://go-review.googlesource.com/13044
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently it's possible for the next_gc heap size trigger computed for
the next GC cycle to be less than the current allocated heap size.
This means the next cycle will start immediately, which means there's
no time to perform the concurrent sweep between GC cycles. This places
responsibility for finishing the sweep on GC itself, which delays GC
start-up and hence delays mutator assist.
Fix this by ensuring that next_gc is always at least a little higher
than the allocated heap size, so we won't trigger the next cycle
instantly.
Updates #11911.
Change-Id: I74f0b887bf187518d5fedffc7989817cbcf30592
Reviewed-on: https://go-review.googlesource.com/13043
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently there are two sensitive periods during which a mutator can
allocate past the heap goal but mutator assists can't be enabled: 1)
at the beginning of GC between when the heap first passes the heap
trigger and sweep termination and 2) at the end of GC between mark
termination and when the background GC goroutine parks. During these
periods there's no back-pressure or safety net, so a rapidly
allocating mutator can allocate past the heap goal. This is
exacerbated if there are many goroutines because the GC coordinator is
scheduled as any other goroutine, so if it gets preempted during one
of these periods, it may stay preempted for a long period (10s or 100s
of milliseconds).
Normally the mutator does scan work to create back-pressure against
allocation, but there is no scan work during these periods. Hence, as
a fall back, if a mutator would assist but can't yet, simply yield the
CPU. This delays the mutator somewhat, but more importantly gives more
CPU time to the GC coordinator for it to complete the transition.
This is obviously a workaround. Issue #11970 suggests a far better but
far more invasive way to fix this.
Updates #11911. (This very nearly fixes the issue, but about once
every 15 minutes I get a GC cycle where the assists are enabled but
don't do enough work.)
Change-Id: I9768b79e3778abd3e06d306596c3bd77f65bf3f1
Reviewed-on: https://go-review.googlesource.com/13026
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently allocation checks the GC trigger speculatively during
allocation and then triggers the GC without rechecking. As a result,
it's possible for G 1 and G 2 to detect the trigger simultaneously,
both enter startGC, G 1 actually starts GC while G 2 gets preempted
until after the whole GC cycle, then G 2 immediately starts another GC
cycle even though the heap is now well under the trigger.
Fix this by re-checking the GC trigger non-speculatively just before
actually kicking off a new GC cycle.
This contributes to #11911 because when this happens, we definitely
don't finish the background sweep before starting the next GC cycle,
which can significantly delay the start of concurrent scan.
Change-Id: I560ab79ba5684ba435084410a9765d28f5745976
Reviewed-on: https://go-review.googlesource.com/13025
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Do not assume that if stat shows multiple links that we should mark the
file as a hardlink in the tar format. If the hardlink link was not
referenced, this caused a link to "/". On an overlay file system, all
files have multiple links.
The caller must keep the inode references and set TypeLink, Size = 0,
and LinkName themselves.
Change-Id: I873b8a235bc8f8fbb271db74ee54232da36ca013
Reviewed-on: https://go-review.googlesource.com/13045
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The buildmode docs mention exported functions, but don't say anything
about how to export them. Mention the cgo tool to make this somewhat
clearer.
Fixes#11955.
Change-Id: Ie5420445daa87f5aceec6ad743465d5d32d0a786
Reviewed-on: https://go-review.googlesource.com/13080
Reviewed-by: Russ Cox <rsc@golang.org>
For niceness, when go/exact was moved from x/tools, it
was renamed go/constant.
For simplicity, when go/types was moved from x/tools, its
imports of (now) go/constant were done with a rename:
import exact "go/constant"
This kept the code just as it was before and avoided the issue
of what to call the internal constant called, um, constant.
But not all was hidden, as the text of some fields of structs and
the like leaked the old name, so things like "exact.Value" appeared
in type definitions and function signatures in the documentation.
This is unacceptable.
Fix the documentation issue by fixing the code. Rename the constant
constant constant_, and remove the renaming import.
This should go into 1.5. It's mostly a mechanical change, is
internal to the package, and fixes the documentation. It contains
no semantic changes except to fix a benchmark that was broken
in the original transition.
Fixes#11949.
Change-Id: Ieb94b6558535b504180b1378f19e8f5a96f92d3c
Reviewed-on: https://go-review.googlesource.com/13051
Reviewed-by: Russ Cox <rsc@golang.org>
This was confusing when I was trying to fix go build -o.
Perhaps due to that fix, this can now be simplified from
three functions to one.
Change-Id: I878a6d243b14132a631e7c62a3bb6d101bc243ea
Reviewed-on: https://go-review.googlesource.com/13027
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Quoting the new docs:
«
If the arguments to build are a list of .go files, build treats
them as a list of source files specifying a single package.
When compiling a single main package, build writes
the resulting executable to an output file named after
the first source file ('go build ed.go rx.go' writes 'ed' or 'ed.exe')
or the source code directory ('go build unix/sam' writes 'sam' or 'sam.exe').
The '.exe' suffix is added when writing a Windows executable.
When compiling multiple packages or a single non-main package,
build compiles the packages but discards the resulting object,
serving only as a check that the packages can be built.
The -o flag, only allowed when compiling a single package,
forces build to write the resulting executable or object
to the named output file, instead of the default behavior described
in the last two paragraphs.
»
There is a change in behavior here, namely that 'go build -o x.a x.go'
where x.go is not a command (not package main) did not write any
output files (back to at least Go 1.2) but now writes x.a.
This seems more reasonable than trying to explain that -o is
sometimes silently ignored.
Otherwise the behavior is unchanged.
The lines being deleted in goFilesPackage look like they are
setting up 'go build x.o' to write 'x.a', but they were overridden
by the p.target = "" in runBuild. Again back to at least Go 1.2,
'go build x.go' for a non-main package has never produced
output. It seems better to keep it that way than to change it,
both for historical consistency and for consistency with
'go build strings' and 'go build std'.
All of this behavior is now tested.
Fixes#10865.
Change-Id: Iccdf21f366fbc8b5ae600a1e50dfe7fc3bff8b1c
Reviewed-on: https://go-review.googlesource.com/13024
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Day <djd@golang.org>
It was failing with multiple goroutines a few out of every thousand
runs (with errRequestCanceled) because it was using the same
*http.Request for all 5 RoundTrips, but the RoundTrips' goroutines
(notably the readLoop method) were all still running, sharing that
same pointer. Because the response has no body (which is what
TestZeroLengthPostAndResponse tests), the readLoop was marking the
connection as reusable early (before the caller read until the body's
EOF), but the Transport code was clearing the Request's cancelation
func *AFTER* the caller had already received it from RoundTrip. This
let the test continue looping and do the next request with the same
pointer, fetch a connection, and then between getConn and roundTrip
have an invariant violated: the Request's cancelation func was nil,
tripping this check:
if !pc.t.replaceReqCanceler(req.Request, pc.cancelRequest) {
pc.t.putIdleConn(pc)
return nil, errRequestCanceled
}
The solution is to clear the request cancelation func in the readLoop
goroutine in the no-body case before it's returned to the caller.
This now passes reliably:
$ go test -race -run=TestZeroLengthPostAndResponse -count=3000
I think we've only seen this recently because we now randomize scheduling
of goroutines in race mode (https://golang.org/cl/11795). This race
has existed for a long time but the window was hard to hit.
Change-Id: Idb91c582919f85aef5b9e5ef23706f1ba9126e9a
Reviewed-on: https://go-review.googlesource.com/13070
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduced in https://go-review.googlesource.com/12865 (git rev c2db5f4c).
This fix doesn't add any new lock acquistions: it just moves the
existing one taken by the unreadDataSize method and moves it out
wider.
It became flaky at rev c2db5f4c, but now reliably passes again:
$ go test -v -race -run=TestTransportAndServerSharedBodyRace -count=100 net/http
Fixes#11985
Change-Id: I6956d62839fd7c37e2f7441b1d425793f4a0db30
Reviewed-on: https://go-review.googlesource.com/12909
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
HTTP servers attempt to entirely consume a request body before sending a
response. However, when doing so, it previously would ignore any errors
encountered.
Unfortunately, the errors triggered at this stage are indicative of at
least a couple problems: read timeouts and chunked encoding errors.
This means properly crafted and/or timed requests could lead to a
"smuggled" request.
The fix is to inspect the errors created by the response body Reader,
and treat anything other than io.EOF or ErrBodyReadAfterClose as
fatal to the connection.
Fixes#11930
Change-Id: I0bf18006d7d8f6537529823fc450f2e2bdb7c18e
Reviewed-on: https://go-review.googlesource.com/12865
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes the receiver name consistent with the rest of the methods on
type Server.
Change-Id: Ic2a007d3b5eb50bd87030e15405e9856109cf590
Reviewed-on: https://go-review.googlesource.com/13035
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The test uses external linking mode, which is probably not available
if cgo does not work.
Fixes#11969.
Change-Id: Id1c2828cd2540391e16b422bf51674ba6ff084b0
Reviewed-on: https://go-review.googlesource.com/13005
Reviewed-by: Russ Cox <rsc@golang.org>
The percolation of errors upward in the load process could
drop errors, meaning that a build tree could, depending on the
processing order, import the same directory as both "p/vendor/x"
and as "x". That's not supposed to be allowed. But then, worse,
the build would generate two jobs for building that directory,
which would use the same work space and overwrite each other's files,
leading to very strange failures.
Two fixes:
1. Fix the propagation of errors upward (prefer errors over success).
2. Check explicitly for duplicated packages before starting a build.
New test for #1.
Since #2 can't happen, tested #2 by hand after reverting fix for #1.
Fixes#11913.
Change-Id: I6d2fc65f93b8fb5f3b263ace8d5f68d803a2ae5c
Reviewed-on: https://go-review.googlesource.com/13022
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On most systems, a pointer is the worst case alignment, so adding
a pointer field at the end of a struct guarantees there will be no
padding added after that field (to satisfy overall struct alignment
due to some more-aligned field also present).
In the runtime, the map implementation needs a quick way to
get to the overflow pointer, which is last in the bucket struct,
so it uses size - sizeof(pointer) as the offset.
NaCl/amd64p32 is the exception, as always.
The worst case alignment is 64 bits but pointers are 32 bits.
There's a long history that is not worth going into, but when
we moved the overflow pointer to the end of the struct,
we didn't get the padding computation right.
The compiler computed the regular struct size and then
on amd64p32 added another 32-bit field.
And the runtime assumed it could step back two 32-bit fields
(one 64-bit register size) to get to the overflow pointer.
But in fact if the struct needed 64-bit alignment, the computation
of the regular struct size would have added a 32-bit pad already,
and then the code unconditionally added a second 32-bit pad.
This placed the overflow pointer three words from the end, not two.
The last two were padding, and since the runtime was consistent
about using the second-to-last word as the overflow pointer,
no harm done in the sense of overwriting useful memory.
But writing the overflow pointer to a non-pointer word of memory
means that the GC can't see the overflow blocks, so it will
collect them prematurely. Then bad things happen.
Correct all this in a few steps:
1. Add an explicit check at the end of the bucket layout in the
compiler that the overflow field is last in the struct, never
followed by padding.
2. When padding is needed on nacl (not always, just when needed),
insert it before the overflow pointer, to preserve the "last in the struct"
property.
3. Let the compiler have the final word on the width of the struct,
by inserting an explicit padding field instead of overwriting the
results of the width computation it does.
4. For the same reason (tell the truth to the compiler), set the type
of the overflow field when we're trying to pretend its not a pointer
(in this case the runtime maintains a list of the overflow blocks
elsewhere).
5. Make the runtime use "last in the struct" as its location algorithm.
This fixes TestTraceStress on nacl/amd64p32.
The 'bad map state' and 'invalid free list' failures no longer occur.
Fixes#11838.
Change-Id: If918887f8f252d988db0a35159944d2b36512f92
Reviewed-on: https://go-review.googlesource.com/12971
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Fixes some minor issues regarding quoted-string when parsing
the local-part.
Those strings should return an error:
- quoted-string without any content: `""@test.com`
- quoted-string containing tab: "\"\t\"@test.com"
Fixes#11293
Change-Id: Ied93eb6831915c9b1f8e727cea14168af21f8d3b
Reviewed-on: https://go-review.googlesource.com/12905
Reviewed-by: Russ Cox <rsc@golang.org>
The code already fixed large non-stack offsets
but explicitly excluded stack references.
Perhaps you could get away with that before,
but current versions of nacl reject such stack
references. Rewrite them the same as the others.
For #11956 but probably not the last problem.
Change-Id: I0db4e3a1ed4f88ccddf0d30228982960091d9fb7
Reviewed-on: https://go-review.googlesource.com/13010
Reviewed-by: Dave Cheney <dave@cheney.net>
Dangling pointer error. Unlikely to trigger in practice, but still.
Found by running GODEBUG=efence=1 GOGC=1 trace.test.
Change-Id: Ice474dedcf62dd33ab77526287a023ba3b166db9
Reviewed-on: https://go-review.googlesource.com/12991
Reviewed-by: Austin Clements <austin@google.com>
In https://golang.org/cl/12080 we forbade installing cross-compiled
binaries into a subdirectory of $GOBIN, in order to fix
https://golang.org/issue/9769. However, that fix was too aggressive,
in that it also forbade installing into a subdirectory of $GOPATH/bin.
This patch permits installing cross-compiled binaries into a
subdirectory $GOPATH/bin while continuing to forbid installing into a
subdirectory of $GOBIN.
Fixes#11778.
Change-Id: Ibc9919554e8c275beff54ec8bf919cfaa03b11ba
Reviewed-on: https://go-review.googlesource.com/12938
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This should fix the solaris/amd64 builder.
Change-Id: Idd6460cc9e842f7b874c9757379986aa723c974c
Reviewed-on: https://go-review.googlesource.com/12922
Reviewed-by: Austin Clements <austin@google.com>
Fixes#11918
Replace calls to lchown(2) with fchownat(2) for linux/arm64 as the former is not suppored.
This change has also landed on the x/sys repo as CL 12837.
Change-Id: I58d4b144e051e36dd650ec9b7f3a02610ea943e5
Reviewed-on: https://go-review.googlesource.com/12833
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Russ Cox <rsc@golang.org>
This only triggers on ARMv7+.
If there are important SMP ARMv6 machines we can reconsider.
Makes TestLFStress tests pass and sync/atomic tests not time out
on Apple iPad Mini 3.
Fixes#7977.
Fixes#10189.
Change-Id: Ie424dea3765176a377d39746be9aa8265d11bec4
Reviewed-on: https://go-review.googlesource.com/12950
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Was not allocating space for the frame above sigpanic,
nor was it pushing the LR into the right place.
Because traceback past sigpanic only needs the
LR for faulting leaves, this was not noticed too much.
But it did break the sync/atomic nil deref tests.
Change-Id: Icba53fffa193423aab744c37f21ee893ce2ee3ac
Reviewed-on: https://go-review.googlesource.com/12926
Reviewed-by: David Crawshaw <crawshaw@golang.org>
ODOTTYPE should be treated a whole lot like ODOT,
but it was missing completely from the switch in
escwalk and thus escape status did not propagate
to fields.
Since interfaces are required to trigger this bug,
the test was added to escape_iface.go.
Fixes#11931.
Change-Id: Id0383981cc4b1a160f6ad447192a112eed084538
Reviewed-on: https://go-review.googlesource.com/12921
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
There is absolutely no information about how this was failing.
If we reenable the test then at least we can get a build log from
darwin/arm.
There are not even freebsd/arm or netbsd/arm builders,
so not too worried about those. (That is another problem.)
Change-Id: I0e739a4dd2897adbe110aa400d720d8fa02ae65f
Reviewed-on: https://go-review.googlesource.com/12920
Reviewed-by: Russ Cox <rsc@golang.org>
Instead of pushing the denominator argument on the stack,
the denominator is now passed in m.
This fixes a variety of bugs related to trying to take stack traces
backwards from the middle of the software div/mod routines.
Some of those bugs have been kludged around in the past,
but others have not. Instead of trying to patch up after breaking
the stack, this CL stops breaking the stack.
This is an update of https://golang.org/cl/19810043,
which was rolled back in https://golang.org/cl/20350043.
The problem in the original CL was that there were divisions
at bad times, when m was not available. These were divisions
by constant denominators, either in C code or in assembly.
The Go compiler knows how to generate division by multiplication
for constant denominators, but the C compiler did not.
There is no longer any C code, so that's taken care of.
There was one problematic DIV in runtime.usleep (assembly)
but https://golang.org/cl/12898 took care of that one.
So now this approach is safe.
Reject DIV/MOD in NOSPLIT functions to keep them from
coming back.
Fixes#6681.
Fixes#6699.
Fixes#10486.
Change-Id: I09a13c76ad08ba75b3bd5d46a3eb78e66a84ab38
Reviewed-on: https://go-review.googlesource.com/12899
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In order to fix issue #9401 the compiler was changed to add a padding
byte to any non-empty Go struct that ends in a zero-sized field. That
causes the Go version of such a C struct to have a different size than
the C struct, which can considerable confusion. Change cgo so that it
discards any such zero-sized fields, so that the Go and C structs are
the same size.
This is a change from previous releases, in that it used to be
possible to refer to a zero-sized trailing field (by taking its
address), and with this change it no longer is. That is unfortunate,
but something has to change. It seems better to visibly break
programs that do this rather than to silently break programs that rely
on the struct sizes being the same.
Update #9401.
Fixes#11925.
Change-Id: I3fba3f02f11265b3c41d68616f79dedb05b81225
Reviewed-on: https://go-review.googlesource.com/12864
Reviewed-by: Russ Cox <rsc@golang.org>
We want to adjust the DIV calling convention to use m,
and usleep can be called without an m, so switch to a
multiplication by the reciprocal (and test).
Step toward a fix for #6699 and #10486.
Change-Id: Iccf76a18432d835e48ec64a2fa34a0e4d6d4b955
Reviewed-on: https://go-review.googlesource.com/12898
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If a function is large enough to need to flush the constant pool
mid-function, the line number assignment code was forcing the
line numbers not just for the constant pool but for all the instructions
that follow it. This made the line number information completely
wrong for all but the beginning of large functions on arm.
Same problem in code copied into arm64.
This broke runtime/trace's TestTraceSymbolize.
Fixes arm build.
Change-Id: I84d9fb2c798c4085f69b68dc766ab4800c7a6ca4
Reviewed-on: https://go-review.googlesource.com/12894
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This allows running a cross-compile like
GOOS=darwin GOARCH=arm go build std
to check that everything builds.
Otherwise there is a redefinition error because both
root_nocgo_darwin.go and root_darwin_armx.go
supply initSystemRoots.
Change-Id: Ic95976b2b698d28c629bfc93d8dac0048b023578
Reviewed-on: https://go-review.googlesource.com/12897
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test expects the dial to take 1.0 seconds
on Windows and allows it to go to 1.095 seconds.
That's far too optimistic.
Recent failures are reporting roughly 1.2 seconds.
Let it have 1.5.
Change-Id: Id69811ccb65bf4b4c159301a2b4767deb6ee8d28
Reviewed-on: https://go-review.googlesource.com/12895
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Urge users of math/rand to consider using crypto/rand when doing
security-sensitive work.
Related to issue #11871. While we haven't reached consensus on how
to make the package inherently safer, everyone agrees that the docs
for math/rand can be improved.
Change-Id: I576a312e51b2a3445691da6b277c7b4717173197
Reviewed-on: https://go-review.googlesource.com/12900
Reviewed-by: Rob Pike <r@golang.org>
For the android/arm builder.
Change-Id: Iad4881689223cd6479870da9541524a8cc458cce
Reviewed-on: https://go-review.googlesource.com/12859
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Fixes arm64 builder crash.
The bug is possible on all architectures; you just have to get lucky
and hit a preemption or a stack growth on entry to assertE2I2.
The test stacks the deck.
Change-Id: I8419da909b06249b1ad15830cbb64e386b6aa5f6
Reviewed-on: https://go-review.googlesource.com/12890
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
It says to disable until #7564 is fixed. It was fixed in April 2014.
Change-Id: I9bebfe96802bafdd2d1a0a47591df346d91b000c
Reviewed-on: https://go-review.googlesource.com/12858
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also make invalidptr control the recently added GC pointer check,
as documented.
Change-Id: Iccfdf49480219d12be8b33b8f03d8312d8ceabed
Reviewed-on: https://go-review.googlesource.com/12857
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The skips added in CL 12579, based on incorrect time stamps,
should be sufficient to identify and exclude all the time-related
flakiness on these systems.
If there is other flakiness, we want to find out.
For #10512.
Change-Id: I5b588ac1585b2e9d1d18143520d2d51686b563e3
Reviewed-on: https://go-review.googlesource.com/12746
Reviewed-by: Austin Clements <austin@google.com>
Nearly all the flaky failures we've seen in trace tests have been
due to the use of time stamps to determine relative event ordering.
This is tricky for many reasons, including:
- different cores might not have exactly synchronized clocks
- VMs are worse than real hardware
- non-x86 chips have different timer resolution than x86 chips
- on fast systems two events can end up with the same time stamp
Stop trying to make time reliable. It's clearly not going to be for Go 1.5.
Instead, record an explicit event sequence number for ordering.
Using our own counter solves all of the above problems.
The trace still contains time stamps, of course. The sequence number
is just used for ordering.
Should alleviate #10554 somewhat. Then tickDiv can be chosen to
be a useful time unit instead of having to be exact for ordering.
Separating ordering and time stamps lets the trace parser diagnose
systems where the time stamp order and actual order do not match
for one reason or another. This CL adds that check to the end of
trace.Parse, after all other sequence order-based checking.
If that error is found, we skip the test instead of failing it.
Putting the check in trace.Parse means that cmd/trace will pick
up the same check, refusing to display a trace where the time stamps
do not match actual ordering.
Using net/http's BenchmarkClientServerParallel4 on various CPU counts,
not tracing vs tracing:
name old time/op new time/op delta
ClientServerParallel4 50.4µs ± 4% 80.2µs ± 4% +59.06% (p=0.000 n=10+10)
ClientServerParallel4-2 33.1µs ± 7% 57.8µs ± 5% +74.53% (p=0.000 n=10+10)
ClientServerParallel4-4 18.5µs ± 4% 32.6µs ± 3% +75.77% (p=0.000 n=10+10)
ClientServerParallel4-6 12.9µs ± 5% 24.4µs ± 2% +89.33% (p=0.000 n=10+10)
ClientServerParallel4-8 11.4µs ± 6% 21.0µs ± 3% +83.40% (p=0.000 n=10+10)
ClientServerParallel4-12 14.4µs ± 4% 23.8µs ± 4% +65.67% (p=0.000 n=10+10)
Fixes#10512.
Change-Id: I173eecf8191e86feefd728a5aad25bf1bc094b12
Reviewed-on: https://go-review.googlesource.com/12579
Reviewed-by: Austin Clements <austin@google.com>
Otherwise the GC may see uninitialized memory there,
which might be old pointers that are retained, or it might
trigger the invalid pointer check.
Fixes#11907.
Change-Id: I67e306384a68468eef45da1a8eb5c9df216a77c0
Reviewed-on: https://go-review.googlesource.com/12852
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The last time we tried this, linux/arm64 broke.
The series of CLs leading to this one fixes that problem.
Let's try again.
Fixes#9880.
Change-Id: I67bc1d959175ec972d4dcbe4aa6f153790f74251
Reviewed-on: https://go-review.googlesource.com/12849
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The layout code has to date insisted on stack frames that are 16-aligned
including the saved LR, and it ensured this by growing the frame itself.
This breaks code that refers to values near the top of the frame by positive
offset from SP, and in general it's too magical: if you see TEXT xxx, $N,
you expect that the frame size is actually N, not sometimes N and sometimes N+8.
This led to a serious bug in the compiler where ambiguously live values
were not being zeroed correctly, which in turn triggered an assertion
in the GC about finding only valid pointers. The compiler has been
fixed to always emit aligned frames, and the hand-written assembly
has also been fixed.
Now that everything is aligned, make unaligned an error instead of
something to "fix" silently.
For #9880.
Change-Id: I05f01a9df174d64b37fa19b36a6b6c5f18d5ba2d
Reviewed-on: https://go-review.googlesource.com/12848
Reviewed-by: Austin Clements <austin@google.com>
The nosplit stack overflow checks were confused about morestack.
The comment about not having correct SP information at the call
to morestack was true, but that was a real bug, not something to
work around. I fixed that problem in CL 12144. With that fixed,
no need to special-case morestack in the way done here.
This cleanup and simplification of the code was the first step
to fixing a bug that happened when I started working on the
arm64 frame size adjustments, but the cleanup was sufficient
to make the bug go away.
For #9880.
Change-Id: I16b69a5c16b6b8cb4090295d3029c42d606e3b9b
Reviewed-on: https://go-review.googlesource.com/12846
Reviewed-by: Austin Clements <austin@google.com>
arm64 requires either no stack frame or a frame with a size that is 8 mod 16
(adding the saved LR will make it 16-aligned).
The cmd/internal/obj/arm64 has been silently aligning frames, but it led to
a terrible bug when the compiler and obj disagreed on the frame size,
and it's just generally confusing, so we're going to make misaligned frames
an error instead of something that is silently changed.
This CL prepares by updating assembly files.
Note that the changes in this CL are already being done silently by
cmd/internal/obj/arm64, so there is no semantic effect here,
just a clarity effect.
For #9880.
Change-Id: Ibd6928dc5fdcd896c2bacd0291bf26b364591e28
Reviewed-on: https://go-review.googlesource.com/12845
Reviewed-by: Austin Clements <austin@google.com>
If the compiler doesn't do it, cmd/internal/obj/arm64 will,
and that will break the zeroing of ambiguously live values
done in zerorange, which in turn produces uninitialized
pointer cells that the GC trips over.
For #9880.
Change-Id: Ice97c30bc8b36d06b7b88d778d87fab8e1827fdc
Reviewed-on: https://go-review.googlesource.com/12847
Reviewed-by: Austin Clements <austin@google.com>
This adds a GCCPUFraction field to MemStats that reports the
cumulative fraction of the program's execution time spent in the
garbage collector. This is equivalent to the utilization percent shown
in the gctrace output and makes this available programmatically.
This does make one small effect on the gctrace output: we now report
the duration of mark termination up to just before the final
start-the-world, rather than up to just after. However, unlike
stop-the-world, I don't believe there's any way that start-the-world
can block, so it should take negligible time.
While there are many statistics one might want to expose via MemStats,
this is one of the few that will undoubtedly remain meaningful
regardless of future changes to the memory system.
The diff for this change is larger than the actual change. Mostly it
lifts the code for computing the GC CPU utilization out of the
debug.gctrace path.
Updates #10323.
Change-Id: I0f7dc3fdcafe95e8d1233ceb79de606b48acd989
Reviewed-on: https://go-review.googlesource.com/12844
Reviewed-by: Russ Cox <rsc@golang.org>
Currently we only capture GC phase transition times if
debug.gctrace>0, but we're about to compute GC CPU utilization
regardless of whether debug.gctrace is set, so we need these
regardless of debug.gctrace.
Change-Id: If3acf16505a43d416e9a99753206f03287180660
Reviewed-on: https://go-review.googlesource.com/12843
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The following sequence of events can lead to the runtime attempting an
out-of-bounds access on a stack barrier slice:
1. A SIGPROF comes in on a thread while the G on that thread is in
_Gsyscall. The sigprof handler calls gentraceback, which saves a
local copy of the G's stkbar slice. Currently the G has no stack
barriers, so this slice is empty.
2. On another thread, the GC concurrently scans the stack of the
goroutine being profiled (it considers it stopped because it's in
_Gsyscall) and installs stack barriers.
3. Back on the sigprof thread, gentraceback comes across a stack
barrier in the stack and attempts to look it up in its (zero
length) copy of G's old stkbar slice, which causes an out-of-bounds
access.
This commit fixes this by adding a simple cas spin to synchronize the
SIGPROF handler with stack barrier insertion.
In general I would prefer that this synchronization be done through
the G status, since that's how stack scans are otherwise synchronized,
but adding a new lock is a much smaller change and G statuses are full
of subtlety.
Fixes#11863.
Change-Id: Ie89614a6238bb9c6a5b1190499b0b48ec759eaf7
Reviewed-on: https://go-review.googlesource.com/12748
Reviewed-by: Russ Cox <rsc@golang.org>
The scheduler, work buffer's dispose, and write barriers
can conspire to hide the a pointer from the GC's concurent
mark phase. If this pointer is the only path to a large
amount of marking the STW mark termination phase may take
a lot of time.
Consider the following:
1) dispose places a work buffer on the partial queue
2) the GC is busy so it does not immediately remove and
process the work buffer
3) the scheduler runs a mutator whose write barrier dequeues the
work buffer from the partial queue so the GC won't see it
This repeats until the GC reaches the mark termination
phase where the GC finally discovers the pointer along
with a lot of work to do.
This CL fixes the problem by having the mutator
dispose of the buffer to the full queue instead of
the partial queue. Since the write buffer never asks for full
buffers the conspiracy described above is not possible.
Updates #11694.
Change-Id: I2ce832f9657a7570f800e8ce4459cd9e304ef43b
Reviewed-on: https://go-review.googlesource.com/12840
Reviewed-by: Austin Clements <austin@google.com>
These are the old assemblers written in C, and now they are
not needed.
Fixes#10510.
Change-Id: Id9337ffc8eccfd93c84b2e23f427fb1a576b543d
Reviewed-on: https://go-review.googlesource.com/12784
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
At this stage, dist is only building go_bootstrap as cmd/compile and
the rest of the Go toolchain has already been built.
Change-Id: I6f99fa00ff1d3585e215f4ce84d49344c4fcb8a5
Reviewed-on: https://go-review.googlesource.com/12779
Reviewed-by: Russ Cox <rsc@golang.org>
Russ Cox fixed this issue for other systems
in CL 12026, but the Plan 9 part was forgotten.
Fixes#11656.
Change-Id: I91c033687987ba43d13ad8f42e3fe4c7a78e6075
Reviewed-on: https://go-review.googlesource.com/12762
Reviewed-by: Russ Cox <rsc@golang.org>
The function is already defined between syscall_solaris.go and
syscall2_solaris.go.
Change-Id: I034baf7c8531566bebfdbc5a4061352cbcc31449
Reviewed-on: https://go-review.googlesource.com/12773
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reformat some help messages to stay within 80 characters.
Fixes#11840.
Change-Id: Iebafcb616f202ac44405e5897097492a79a51722
Reviewed-on: https://go-review.googlesource.com/12514
Reviewed-by: Rob Pike <r@golang.org>
This change prevents DNS query results using domain search list
overtaking results not using the list unconditionally, which only
happens when using builtin DNS stub resolver.
The previous internal lookup function lookup is split into lookup and
goLookupIPOrder for iteration over a set of names: FQDN or absolute
FQDN, with domain label suffixes in search list, without domain label
suffixes, and for concurrent A and AAAA record queries.
Fixes#11081.
Change-Id: I9ff0640f69276e372d97e709b149ed5b153e8601
Reviewed-on: https://go-review.googlesource.com/10836
Reviewed-by: Russ Cox <rsc@golang.org>
Rename test name from Http to HTTP, and fix some style nits.
Change-Id: I00fe1cecd69ca2f50be86a76ec90031c2f921707
Reviewed-on: https://go-review.googlesource.com/12760
Reviewed-by: Andrew Gerrand <adg@golang.org>
A further attempt to fix raiseproc on Solaris.
Change-Id: I8d8000d6ccd0cd9f029ebe1f211b76ecee230cd0
Reviewed-on: https://go-review.googlesource.com/12771
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I forgot that the libc raise function only sends the signal to the
current thread. We need to actually use kill and getpid here, as we
do on other systems.
Change-Id: Iac34af822c93468bf68cab8879db3ee20891caaf
Reviewed-on: https://go-review.googlesource.com/12704
Reviewed-by: Russ Cox <rsc@golang.org>
I've also changed TestDialSerialAsyncSpuriousConnection for consistency,
although it always computes a finalDeadline of zero.
Note that #11225 is the root cause of the socket leak; this just hides
it from the unit test by restoring the shorter timeout.
Fixes#11878
Change-Id: Ie0037dd3bce6cc81d196765375489f8c61be74c2
Reviewed-on: https://go-review.googlesource.com/12712
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Paul Marks <pmarks@google.com>
Fixes#11436.
Change-Id: I5c4455e9b13b478838f23ac31e6343672dfc60af
Reviewed-on: https://go-review.googlesource.com/12143
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Until cl/12721 and cl/12574, all standard library tests included
runtime/cgo on darwin/arm64 by virtue of package os including it. Now
that is no longer true, runtime/cgo needs to be added by the go tool
just as it is for darwin/arm. (This installs the Mach exception
handler used to properly handle EXC_BAD_ACCESS.)
Fixes#11901
Change-Id: I991525f46eca5b0750b93595579ebc0ff10e47eb
Reviewed-on: https://go-review.googlesource.com/12723
Reviewed-by: Russ Cox <rsc@golang.org>
The new Token API is meant to sit on the side of the Decoder,
so that you only get the new code (and any latent bugs in it)
if you are actively using the Token API.
The unconditional use of dec.peek in dec.tokenPrepareForDecode
violates that intention.
Change tokenPrepareForDecode not to call dec.peek unless needed
(because the Token API has advanced the state).
This restores the old code path behavior, no peeking allowed.
I checked by patching in the new tests from CL 12726 that
this change suffices to "fix" the error handling bug in dec.peek.
Obviously that bug should be fixed too, but the point is that
with this CL, bugs in dec.peek do not affect plain use of Decode
or Unmarshal.
I also checked by putting a panic in dec.peek that the only
tests that now invoke peek are:
TestDecodeInStream
ExampleDecoder_Token
ExampleDecoder_Decode_stream
and those tests all invoke dec.Token directly.
Change-Id: I0b242d0cb54a9c830548644670dc5ab5ccef69f2
Reviewed-on: https://go-review.googlesource.com/12740
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Peter Waldschmidt <peter@waldschmidt.com>
From https://github.com/golang/go/issues/11745#issuecomment-123555313
this implements option (b), having the server pause slightly after
sending the final response on a TCP connection when we're about to close
it when we know there's a request body outstanding. This biases the
client (which might not be Go) to prefer our response header over the
request body write error.
Updates #11745
Change-Id: I07cb0b74519d266c8049d9e0eb23a61304eedbf8
Reviewed-on: https://go-review.googlesource.com/12658
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Seems like the simplest solution for 1.5. All the parts of the test
suite I can run on my current device (for which my exception handler
fix no longer works, apparently) pass without this code. I'll move it
into x/mobile/app.
Fixes#11884
Change-Id: I2da40c8c7b48a4c6970c4d709dd7c148a22e8727
Reviewed-on: https://go-review.googlesource.com/12721
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently we enter mark 2 by first flushing all existing gcWork caches
and then setting gcBlackenPromptly, which disables further gcWork
caching. However, if a worker or assist pulls a work buffer in to its
gcWork cache after that cache has been flushed but before caching is
disabled, that work may remain in that cache until mark termination.
If that work represents a heap bottleneck (e.g., a single pointer that
is the only way to reach a large amount of the heap), this can force
mark termination to do a large amount of work, resulting in a long
STW.
Fix this by reversing the order of these steps: first disable caching,
then flush all existing caches.
Rick Hudson <rlh> did the hard work of tracking this down. This CL
combined with CL 12672 and CL 12646 distills the critical parts of his
fix from CL 12539.
Fixes#11694.
Change-Id: Ib10d0a21e3f6170a80727d0286f9990df049fed2
Reviewed-on: https://go-review.googlesource.com/12688
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the GC coordinator enables GC assists at the same time it
enables background mark workers, after the concurrent scan phase is
done. However, this means a rapidly allocating mutator has the entire
scan phase during which to allocate beyond the heap trigger and
potentially beyond the heap goal with no back-pressure from assists.
This prevents the feedback system that's supposed to keep the heap
size under the heap goal from doing its job.
Fix this by enabling mutator assists during the scan phase. This is
safe because the write barrier is already enabled and globally
acknowledged at this point.
There's still a very small window between when the heap size reaches
the heap trigger and when the GC coordinator is able to stop the world
during which the mutator can allocate unabated. This allows *very*
rapidly allocator mutators like TestTraceStress to still occasionally
exceed the heap goal by a small amount (~20 MB at most for
TestTraceStress). However, this seems like a corner case.
Fixes#11677.
Change-Id: I0f80d949ec82341cd31ca1604a626efb7295a819
Reviewed-on: https://go-review.googlesource.com/12674
Reviewed-by: Russ Cox <rsc@golang.org>
Currently we hand-code a set of phases when draining is allowed.
However, this set of phases is conservative. The critical invariant is
simply that the write barrier must be enabled if we're draining.
Shortly we're going to enable mutator assists during the scan phase,
which means we may drain during the scan phase. In preparation, this
commit generalizes these assertions to check the fundamental condition
that the write barrier is enabled, rather than checking that we're in
any particular phase.
Change-Id: I0e1bec1ca823d4a697a0831ec4c50f5dd3f2a893
Reviewed-on: https://go-review.googlesource.com/12673
Reviewed-by: Russ Cox <rsc@golang.org>
Currently we clear both the mark 1 and mark 2 signals at the beginning
of concurrent mark. If either if these is clear, it acts as a signal
to the scheduler that it should start background workers. However,
this means that in the interim *between* mark 1 and mark 2, the
scheduler basically loops starting up new workers only to have them
return with nothing to do. In addition to harming performance and
delaying mutator work, this approach has a race where workers started
for mark 1 can mistakenly signal mark 2, causing it to complete
prematurely. This approach also interferes with starting assists
earlier to fix#11677.
Fix this by initially setting both mark 1 and mark 2 to "signaled".
The scheduler will not start background mark workers, though assists
can still run. When we're ready to enter mark 1, we clear the mark 1
signal and wait for it. Then, when we're ready to enter mark 2, we
clear the mark 2 signal and wait for it.
This structure also lets us deal cleanly with the situation where all
work is drained *prior* to the mark 2 wait, meaning that there may be
no workers to signal completion. Currently we deal with this using a
racy (and possibly incorrect) check for work in the coordinator itself
to skip the mark 2 wait if there's no work. This change makes the
coordinator unconditionally wait for mark completion and makes the
scheduler itself signal completion by slightly extending the logic it
already has to determine that there's no work and hence no use in
starting a new worker.
This is a prerequisite to fixing the remaining component of #11677,
which will require enabling assists during the scan phase. However, we
don't want to enable background workers until the mark phase because
they will compete with the scan. This change lets us use bgMark1 and
bgMark2 to indicate when it's okay to start background workers
independent of assists.
This is also a prerequisite to fixing #11694. It significantly reduces
the occurrence of long mark termination pauses in #11694 (from 64 out
of 1000 to 2 out of 1000 in one experiment).
Coincidentally, this also reduces the final heap size (and hence run
time) of TestTraceStress from ~100 MB and ~1.9 seconds to ~14 MB and
~0.4 seconds because it significantly shortens concurrent mark
duration.
Rick Hudson <rlh> did the hard work of tracking this down.
Change-Id: I12ea9ee2db9a0ae9d3a90dde4944a75fcf408f4c
Reviewed-on: https://go-review.googlesource.com/12672
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, there are three ways to satisfy a GC assist: 1) the mutator
steals credit from background GC, 2) the mutator actually does GC
work, and 3) there is no more work available. 3 was never really
intended as a way to satisfy an assist, and it causes problems: there
are periods when it's expected that the GC won't have any work, such
as when transitioning from mark 1 to mark 2 and from mark 2 to mark
termination. During these periods, there's no back-pressure on rapidly
allocating mutators, which lets them race ahead of the heap goal.
For example, test/init1.go and the runtime/trace test both have small
reachable heaps and contain loops that rapidly allocate large garbage
byte slices. This bug lets these tests exceed the heap goal by several
orders of magnitude.
Fix this by forcing the assist (and hence the allocation) to block
until it can satisfy its debt via either 1 or 2, or the GC cycle
terminates.
This fixes one the causes of #11677. It's still possible to overshoot
the GC heap goal, but with this change the overshoot is almost exactly
by the amount of allocation that happens during the concurrent scan
phase, between when the heap passes the GC trigger and when the GC
enables assists.
Change-Id: I5ef4edcb0d2e13a1e432e66e8245f2bd9f8995be
Reviewed-on: https://go-review.googlesource.com/12671
Reviewed-by: Russ Cox <rsc@golang.org>
Currently it's possible for the GC assist to signal completion of the
mark phase, which puts the GC coordinator goroutine on the current P's
run queue, and then return to mutator code that delays until the next
forced preemption before actually yielding control to the GC
coordinator, dragging out completion of the mark phase. This delay can
be further exacerbated if the mutator makes other goroutines runnable
before yielding control, since this will push the GC coordinator on
the back of the P's run queue.
To fix this, this adds a Gosched to the assist if it completed the
mark phase. This immediately and directly yields control to the GC
coordinator. This already happens implicitly in the background mark
workers because they park immediately after completing the mark.
This is one of the reasons completion of the mark phase is being
dragged out and allowing the mutator to allocate without assisting,
leading to the large heap goal overshoot in issue #11677. This is also
a prerequisite to making the assist block when it can't pay off its
debt.
Change-Id: I586adfbecb3ca042a37966752c1dc757f5c7fc78
Reviewed-on: https://go-review.googlesource.com/12670
Reviewed-by: Russ Cox <rsc@golang.org>
Currently it's possible to perform GC work on a system stack or when
locks are held if there's an allocation that triggers an assist. This
is generally a bad idea because of the fragility of these contexts,
and it's incompatible with two changes we're about to make: one is to
yield after signaling mark completion (which we can't do from a
non-preemptible context) and the other is to make assists block if
there's no other way for them to pay off the assist debt.
This commit simply skips the assist if it's called from a
non-preemptible context. The allocation will still count toward the
assist debt, so it will be paid off by a later assist. There should be
little allocation from non-preemptible contexts, so this shouldn't
harm the overall assist mechanism.
Change-Id: I7bf0e6c73e659fe6b52f27437abf39d76b245c79
Reviewed-on: https://go-review.googlesource.com/12649
Reviewed-by: Russ Cox <rsc@golang.org>
When notetsleep_internal is called from notetsleepg, notetsleepg has
just given up the P, so write barriers are not allowed in
notetsleep_internal.
Change-Id: I1b214fa388b1ea05b8ce2dcfe1c0074c0a3c8870
Reviewed-on: https://go-review.googlesource.com/12647
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Currently fractional and idle mark workers dispose of their gcWork
cache during mark 2 after incrementing work.nwait and after checking
whether there are any workers or any work available. This creates a
window for two races:
1) If the only remaining work is in this worker's gcWork cache, it
will see that there are no more workers and no more work on the
global lists (since it has not yet flushed its own cache) and
prematurely signal mark 2 completion.
2) After this worker has incremented work.nwait but before it has
flushed its cache, another worker may observe that there are no
more workers and no more work and prematurely signal mark 2
completion.
We can fix both of these by simply moving the cache flush above the
increment of nwait and the test of the completion condition.
This is probably contributing to #11694, though this alone is not
enough to fix it.
Change-Id: Idcf9656e5c460c5ea0d23c19c6c51e951f7716c3
Reviewed-on: https://go-review.googlesource.com/12646
Reviewed-by: Russ Cox <rsc@golang.org>
GC assists are supposed to steal at most the amount of background GC
credit available so that background GC credit doesn't go negative.
However, they are instead stealing the *total* amount of their debt
but only claiming up to the amount of credit that was available. This
results in draining the background GC credit pool too quickly, which
results in unnecessary assist work.
The fix is trivial: steal the amount of work we meant to steal (which
is already computed).
Change-Id: I837fe60ed515ba91c6baf363248069734a7895ef
Reviewed-on: https://go-review.googlesource.com/12643
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
CL https://golang.org/cl/12470 has reportedly fixed the problems that
the misc/cgo/testsovar test encountered on darwin and netbsd. Let's
actually run the test.
Update #10360.
Update #11654.
Change-Id: I4cdd27a8ec8713620e0135780a03f63cfcc538d0
Reviewed-on: https://go-review.googlesource.com/12702
Reviewed-by: Russ Cox <rsc@golang.org>
This race was identified in #9796, but a sequence of fixes
proposed in golang.org/cl/4152 were rolled into
golang.org/cl/5910 which both fixed the race and
modified the name space behavior.
We rolled back the name space changes and lost the race fix.
Fix the race separate from the name space changes,
following the suggestion made by Roger Peppe in
https://go-review.googlesource.com/#/c/4152/7/src/encoding/xml/marshal.go@897Fixes#9796.
Fixes#11885.
Change-Id: Ib2b68982da83dee9e04db8b8465a8295259bba46
Reviewed-on: https://go-review.googlesource.com/12687
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Currently the gctrace output reports the trigger heap size, rather
than the actual heap size at the beginning of GC. Often these are the
same, or at least very close. However, it's possible for the heap to
already have exceeded this trigger when we first check the trigger and
start GC; in this case, this output is very misleading. We've
encountered this confusion a few times when debugging and this
behavior is difficult to document succinctly.
Change the gctrace output to report the actual heap size when GC
starts, rather than the trigger.
Change-Id: I246b3ccae4c4c7ea44c012e70d24a46878d7601f
Reviewed-on: https://go-review.googlesource.com/12452
Reviewed-by: Russ Cox <rsc@golang.org>
Whenever someone pastes gctrace output into GitHub, it helpfully turns
the GC cycle number into a link to some unrelated issue. Prevent this
by removing the pound before the cycle number. The fact that this is a
cycle number is probably more obvious at a glance than most of the
other numbers.
Change-Id: Ifa5fc7fe6c715eac50e639f25bc36c81a132ffea
Reviewed-on: https://go-review.googlesource.com/12413
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
svn dies due to not being able to validate the googlecode.com certificate.
hg does not even attempt to validate it.
Fixes#11806.
Change-Id: I84ced5aa84bb1e4a4cdb2254f2d08a64a1ef23f6
Reviewed-on: https://go-review.googlesource.com/12558
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes TestGoGetWorksWithVanityWildcards,
but that test uses the network and is not run
on the builders.
For #11806.
Change-Id: I35c6677deaf84e2fa9bdb98b62d80d388b5248ae
Reviewed-on: https://go-review.googlesource.com/12557
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This extends https://golang.org/cl/2811, which only applied to Darwin
and GNU/Linux, to all Unix systems.
Fixes#9591.
Change-Id: Iec3fb438564ba2924b15b447c0480f87c0bfd009
Reviewed-on: https://go-review.googlesource.com/12661
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
From https://github.com/golang/go/issues/11745#issuecomment-123555313 :
The http.RoundTripper interface says you get either a *Response, or an
error.
But in the case of a client writing a large request and the server
replying prematurely (e.g. 403 Forbidden) and closing the connection
without reading the request body, what does the client want? The 403
response, or the error that the body couldn't be copied?
This CL implements the aforementioned comment's option c), making the
Transport give an N millisecond advantage to responses over body write
errors.
Updates #11745
Change-Id: I4485a782505d54de6189f6856a7a1f33ce4d5e5e
Reviewed-on: https://go-review.googlesource.com/12590
Reviewed-by: Russ Cox <rsc@golang.org>
We used to use build.Import to get the dependencies, but that meant
we had to repeat the check for every possible GOOS/GOARCH/cgo
combination, which took too long. So we made the test in short mode
only check the current GOOS/GOARCH/cgo combination.
But some combinations can't run the test at all. For example darwin/arm64
does not run tests with a full source file systems, so it cannot test itself,
so nothing was testing darwin/arm64. This led to bugs like #10455
not being caught.
Rewrite the test to read the imports out of the source files ourselves,
so that we can look at all source files in a directory in one pass,
regardless of which GOOS/GOARCH/cgo/etc they require.
This one complete pass runs in the same amount of time as the
old single combination check ran, so we can now test all systems,
even in short mode.
Change-Id: Ie216303c2515bbf1b6fb717d530a0636e271cb6d
Reviewed-on: https://go-review.googlesource.com/12576
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change adds new methods to Decoder.
* Decoder.Token steps through a JSON document, returning a value for each token.
* Decoder.Decode unmarshals the entire value at the token stream's current
position (in addition to its existing function in a stream of JSON values)
Fixes#6050.
Fixes#6499.
Change-Id: Iff283e0e7b537221ae256392aca6529f06ebe211
Reviewed-on: https://go-review.googlesource.com/9073
Reviewed-by: Russ Cox <rsc@golang.org>
A while back we discovered that the dependencies test allowed
arbitrary dependencies for packages we forgot to list.
To stop the damage we added a grandfathered list and fixed
the code to expect unlisted packages to have no dependencies.
This CL replaces the grandfathered list with some more
careful placement of dependency rules.
Thankfully, there were no terrible inversions.
Fixes#10487.
Change-Id: I5a6f92435bd2c66c47ec8ab629edbd88b189f028
Reviewed-on: https://go-review.googlesource.com/12575
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
It's not clear this really belongs anywhere at all,
but this is a better place for it than package os.
This way package os can avoid importing "C".
Fixes#10455.
Change-Id: Ibe321a93bf26f478951c3a067d75e22f3d967eb7
Reviewed-on: https://go-review.googlesource.com/12574
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
It was not running because of invalid use of ArchChar.
I didn't catch this when I scrubbed ArchChar from the tree
because this code wasn't in the tree yet.
The test seems to pass, which is nice.
Change-Id: I59761a7a04a73681e147e25c1e7f010068276aa8
Reviewed-on: https://go-review.googlesource.com/12573
Reviewed-by: Robert Griesemer <gri@golang.org>
There is clearly work to do here with respect to xml name spaces,
but I don't believe the changes in this cycle are clearly correct.
The changes in this cycle have visible impact on the generated xml,
possibly breaking existing programs, and yet it's not clear that they
are the end of the story: there is still significant confusion about how
name spaces work or should work (see #9519, #9775, #8167, #7113).
I would like to wait to make breaking changes until we completely
understand what the behavior should be and can evaluate the benefit
of those breaking changes. My main concern here is that we will break
programs in Go 1.5 for the sake of name space adjustments and then
while trying to fix those other bugs we'll break programs in Go 1.6 too.
Let's wait until we know all the changes we want to make before we
decide whether or how to break existing programs.
This CL reverts:
5ae822b encoding/xml: minor changes
bb7e665 encoding/xml: fix xmlns= behavior
9f9d66d encoding/xml: fix default namespace of tags
b69ea01 encoding/xml: fix namespaces in a>b tags
3be158d encoding/xml: encoding name spaces correctly
and adjusts tests from
a9dddb5 encoding/xml: add more EncodeToken tests.
to expect Go 1.4 behavior.
I have confirmed that the name space parts of the test suite
as of this CL passes against the Go 1.4 encoding/xml package,
indicating that this CL successfully restores the Go 1.4 behavior.
(Other tests do not, but that's because there were some real
bug fixes in this cycle that are being kept. Specifically, the
tests that don't pass in Go 1.4 are TestMarshal's NestedAndComment
case, TestEncodeToken's encoding of newlines, and
TestSimpleUseOfEncodeToken returning an error for invalid
token types.)
I also checked that the Go 1.4 tests pass when run against
this copy of the sources.
Fixes#11841.
Change-Id: I97de06761038b40388ef6e3a55547ff43edee7cb
Reviewed-on: https://go-review.googlesource.com/12570
Reviewed-by: Nigel Tao <nigeltao@golang.org>
The "add a Request.Cancel channel" change (https://golang.org/cl/11601)
added support for "race free" cancellation, but introduced a data race. :)
Noticed while running "go test -race net/http". The test is skipped in
short mode, so we never saw it on the dashboard.
Change-Id: Ica14579d8723f8f9d1691e8d56c30b585b332c64
Reviewed-on: https://go-review.googlesource.com/12663
Reviewed-by: Aaron Jacobs <jacobsa@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Not everyone is aware that go build is a wrapper for other
tools. Mention this in the text for go help build so people using
other build systems won't just wrap go build, which is usually a
mistake (it doesn't do incremental builds by default, for instance).
Update #11854.
Change-Id: I759f91f23ccd3671204c39feea12a3bfaf9f0114
Reviewed-on: https://go-review.googlesource.com/12625
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The system stack is only around 8kb on ARM so one can't put an 8kb buffer on
the stack. More than 1024 ARM cores seems sufficiently unlikely for the
foreseeable future.
Fixes#11853
Change-Id: I7cb27c1250a6153f86e269c172054e9dfc218c72
Reviewed-on: https://go-review.googlesource.com/12622
Reviewed-by: Austin Clements <austin@google.com>
Currently TestDoDupSuppress can fail if the goroutines created by its
loop run sequentially. This is rare, but it has caused failures on the
dashboard and in stress testing.
While I think there's no way to eliminate all possible thread
schedules that could make this test fail because it depends on waiting
until a Group.Do blocks, it is possible to make it much more robust.
This commit deflakes this test by forcing at least one invocation of
fn to start and all goroutines to reach the line just before the Do
call before allowing fn to proceed. fn then waits 10 milliseconds
before returning to allow the goroutines to pass through the Do.
With this change, in 50,000 runs of the stress testing configuration,
the number of calls to fn never even exceeded 1.
Fixes#11784.
Change-Id: Ie5adf5764545050ec407619769a656251c4cff04
Reviewed-on: https://go-review.googlesource.com/12681
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Update the docs to explain the code added in
commit 67e1d400.
Fixes#11831.
Change-Id: I8fe72e449507847c4bd9d77de40947ded7f2ff9d
Reviewed-on: https://go-review.googlesource.com/12515
Reviewed-by: Dave Cheney <dave@cheney.net>
Issue 11214 reports problems with older versions of gdb. It does work
with gdb 7.9 on my Ubuntu Trusty system, so take that as the minimum
required version.
Fixes#11214.
Change-Id: I61b732895506575be7af595f81fc1bcf696f58c2
Reviewed-on: https://go-review.googlesource.com/12626
Reviewed-by: Austin Clements <austin@google.com>
This adds documentation for all the environment variables I could
locate in the go tool and the commands that it invokes.
Fixes#9672.
Change-Id: Id5f09160a3a8a938af4a3fcb8757eb3eced05416
Reviewed-on: https://go-review.googlesource.com/12620
Reviewed-by: Rob Pike <r@golang.org>
In https://go-review.googlesource.com/#/c/8611/ , these tests were
supposed to be skipped only for linux and darwin, as the comment says.
This patch fixes the logic in the if test.
Change-Id: Iff0a32186267457a414912c4c3ee4495650891a2
Reviewed-on: https://go-review.googlesource.com/12517
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Old code appended, did not play well with a closure
with a ... param.
Fixes#11075.
Change-Id: Ib7c8590c5c4e576e798837e7499e00f3494efb4a
Reviewed-on: https://go-review.googlesource.com/12580
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
On Windows, gcc -o foo will generate foo.exe. Prevent that from
happening by adding a final '.' if necessary so that GCC thinks that
the file already has an extension.
Also remove the initial output file when doing an external link, and
use mayberemoveoutfile, not os.Remove, when building an archive
(otherwise we will do the wrong thing for -buildmode=c-archive -o
/dev/null).
I didn't add a test, as it requires using cgo and -o on Windows.
Fixes#11725.
Change-Id: I6ea12437bb6b4b9b8ee5c3b52d83509fa2437b2d
Reviewed-on: https://go-review.googlesource.com/12243
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
EncodeToken takes a Token (i.e. an interface{}) as a parameter,
and expects a value of type StartElement, EndElement, CharData,
Comment, ProcInst, or Directive.
If a pointer is passed instead, or any type which does not match
this list, the token is silently ignored.
Added a default case in the type switch to issue a proper error
when the type is invalid.
The behavior could be later improved by allowing pointers to
token to be accepted as well, but not for go1.5.
Fixes#11719
Change-Id: Ifd13c1563450b474acf66d57669fdccba76c1949
Reviewed-on: https://go-review.googlesource.com/12252
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Foreign code can be arbitrarily aligned,
so the function before it can have
arbitrarily much padding.
We can't call pcvalue on values in the padding.
Fixes#11653.
Change-Id: I7d57f813ae5a2409d1520fcc909af3eeef2da131
Reviewed-on: https://go-review.googlesource.com/12550
Reviewed-by: Rob Pike <r@golang.org>
We use 127.0.0.1 instead of localhost in Go networking tests.
The reporter of #11774 has localhost defined to be 120.192.83.162,
for reasons unknown.
Also, if TestTraceSymbolize calls Fatalf (for example because Listen
fails) then we need to stop the trace for future tests to work.
See failure log in #11774.
Fixes#11774.
Change-Id: Iceddb03a72d31e967acd2d559ecb78051f9c14b7
Reviewed-on: https://go-review.googlesource.com/12521
Reviewed-by: Rob Pike <r@golang.org>
It wasn't working. The wrong variable was used.
This would ideally have tests. It's also DEBUG.
Fixes#11816
Change-Id: Iec42d229b81d78cece4ba5c73f3040e2356eb98f
Reviewed-on: https://go-review.googlesource.com/12544
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When dialing with a relative Timeout instead of an absolute Deadline,
the deadline function only makes sense if called before doing any
time-consuming work.
This change calls deadline exactly once, storing the result until the
Dial operation completes. The partialDeadline implementation is
reverted to the following patch set 3:
https://go-review.googlesource.com/#/c/8768/3..4/src/net/dial.go
Otherwise, when dialing a name with multiple IP addresses, or when DNS
is slow, the recomputed deadline causes the total Timeout to exceed that
requested by the user.
Fixes#11796
Change-Id: I5e1f0d545f9e86a4e0e2ac31a9bd108849cf0fdf
Reviewed-on: https://go-review.googlesource.com/12442
Run-TryBot: Paul Marks <pmarks@google.com>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is needed to handle vendor directories correctly. It was already
done for the regular imports when the package was loaded, but not for
the test-only imports.
It would be nice to do this while loading the package, but that breaks
the code that checks for direct references to vendor packages when
running go test. This change is relatively contained.
While we're at it, skip "C" test imports in go get.
Fixes#11628.
Fixes#11717.
Change-Id: I9cc308cf45683e3ff905320c2b5cb45db7716846
Reviewed-on: https://go-review.googlesource.com/12488
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Updated Address.String so it restores quoted local parts, which wasn't
done before.
When parsing `<" "@example.com>`, the formatted string returned
`< @example>`, which doens't match RFC 5322, since a space is not atext.
Another example is `<"bob@valid"@example.com>` which returned
`<bob@valid@example.com>`, which is completely invalid.
I also added support for quotes and backslashes in a quoted local part.
Besides formatting a parsed Address, the ParseAddress function also
needed more testing and finetuning for special cases.
Things like `<.john.doe@example.com>` and `<john..doe@example.com>`
e.a. were accepted, but are invalid.
I fixed those details and add tests for some other special cases.
Fixes#10768
Change-Id: Ib0caf8ad603eb21e32fcb957a5f1a0fe5d1c6e6e
Reviewed-on: https://go-review.googlesource.com/8724
Reviewed-by: Russ Cox <rsc@golang.org>
Some routines run without and m or g and cannot invoke the
race detector runtime. They must be opaque to the runtime.
That used to be true because they were written in C.
Now that they are written in Go, disable the race detector
annotations for those functions explicitly.
Add test.
Fixes#10874.
Change-Id: Ia8cc28d51e7051528f9f9594b75634e6bb66a785
Reviewed-on: https://go-review.googlesource.com/12534
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Same as we do for string symbols.
Fixes#11583.
Change-Id: Ia9264f6faf486697d987051b7f9851d37d8ad381
Reviewed-on: https://go-review.googlesource.com/12531
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In the past badsignal would crash the program. In
https://golang.org/cl/10757044 badsignal was changed to call sigsend,
to fix issue #3250. The effect of this was that when a non-Go thread
received a signal, and os/signal.Notify was not being used to check
for occurrences of the signal, the signal was ignored.
This changes the code so that if os/signal.Notify is not being used,
then the signal handler is reset to what it was, and the signal is
raised again. This lets non-Go threads handle the signal as they
wish. In particular, it means that a segmentation violation in a
non-Go thread will ordinarily crash the process, as it should.
Fixes#10139.
Update #11794.
Change-Id: I2109444aaada9d963ad03b1d071ec667760515e5
Reviewed-on: https://go-review.googlesource.com/12503
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This change fixes resolution of secure (https) repo URL for
git.apache.org Git repositories.
E.g. the correct repo URL for git.apache.org/thrift.git/lib/go/thrift is
https://git.apache.org/thrift.git, not https://git.apache.org/thriftFixes#10797
Change-Id: I67d5312ad8620eb780e42c2e002c8f286f60645a
Reviewed-on: https://go-review.googlesource.com/10092
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It's a bad test and it's worst on uniprocessors.
Fixes#11143.
Change-Id: I0164231ada294788d7eec251a2fc33e02a26c13b
Reviewed-on: https://go-review.googlesource.com/12522
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ae1ea2a moved trace-related functions from runtime/pprof to
runtime/trace, but missed a doc comment and a code comment. Update
these to reflect the move.
Change-Id: I6e1e8861e5ede465c08a2e3f80b976145a8b32d8
Reviewed-on: https://go-review.googlesource.com/12525
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
It is very useful to see which test commands are executed.
This is of global use, but I wrote it for #11654.
Change-Id: I9bfc8e55d5bef21f4c49b917f58bc9a44aefcade
Reviewed-on: https://go-review.googlesource.com/12510
Reviewed-by: Russ Cox <rsc@golang.org>
Move tracing functions from runtime/pprof to the new runtime/trace package.
Fixes#9710
Change-Id: I718bcb2ae3e5959d9f72cab5e6708289e5c8ebd5
Reviewed-on: https://go-review.googlesource.com/12511
Reviewed-by: Russ Cox <rsc@golang.org>
JSON decoding currently fails for null values bound to any type
which does implement the JSON Unmarshaler interface without checking
for null values (such as time.Time).
It also fails for types implementing the TextUnmarshaler interface.
The expected behavior of the JSON decoding engine in such case is
to process null by keeping the value unchanged without producing
any error.
Make sure null values are handled by the decoding engine itself,
and never passed to the UnmarshalText or UnmarshalJSON methods.
Fixes#9037
Change-Id: I261d85587ba543ef6f1815555b2af9311034d5bb
Reviewed-on: https://go-review.googlesource.com/9376
Reviewed-by: Russ Cox <rsc@golang.org>
dist test should not print (especially to stdout) during test
registration. This confuses other tools interacting with dist using
dist test --list, etc.
Change-Id: Ie4f82c13e49590c23a7a235d90ddbc4f5ed81e0b
Reviewed-on: https://go-review.googlesource.com/12487
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In lieu of the more invasive https://go-review.googlesource.com/#/c/12373/ .
Change-Id: I0221783fcaa8af04520c80cd2993d7d542d2c431
Reviewed-on: https://go-review.googlesource.com/12486
Reviewed-by: Alan Donovan <adonovan@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
That test will install cmd/pack for linux_386; we don't want to change
GOROOT in short mode.
Change-Id: I4b00c578a99779a13c558208bfd4115f8f0513fa
Reviewed-on: https://go-review.googlesource.com/12481
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The cmd/go tests run too long on a Raspberry Pi. I've cut times as
much as I can see without more serious steps like not running tests.
Fixes#11779.
Change-Id: Ice5da052902decea2e6ac32d0f2ce084c39ea1ab
Reviewed-on: https://go-review.googlesource.com/12368
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Speed up the test suite by building the errors package rather than the
strings package in some cases where the specific package we are
building doesn't matter. The errors package is smaller, and doesn't
have any assembler code.
Also make a couple of tests run in parallel.
Update #11779.
Change-Id: I62e47f8655f9d85bf93c70ae6e6121276d96aee0
Reviewed-on: https://go-review.googlesource.com/12365
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It changes GOROOT, so we shouldn't run it in short mode. Also, it's
fairly slow.
Update #11779.
Change-Id: I3d3344954cf9b2ac70070c878a67cb65ac8fd85c
Reviewed-on: https://go-review.googlesource.com/12364
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
On my laptop reduces time required for test from 22 seconds to 0.14
seconds.
Update #11779.
Change-Id: I715d85bd9c6f7683c6915eedd2539813aa5efc58
Reviewed-on: https://go-review.googlesource.com/12363
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
This is mostly Russ's https://golang.org/cl/12145 but with some extra fixes to
account for the fact that function declarations without implementations now
break shared libraries, and including my test case.
Fixes#11480.
Change-Id: Iabdc2934a0378e5025e4e7affadb535eaef2c8f1
Reviewed-on: https://go-review.googlesource.com/12340
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The runtime.GC documentation was rewritten in df2809f to make it clear
that it blocks until GC is complete, but the re-rewrite in ed9a4c9 and
e28a679 lost this property when clarifying that it may also block the
entire program and not just the caller.
Try to arrive at wording that conveys both of these properties.
Change-Id: I1e255322aa28a21a548556ecf2a44d8d8ac524ef
Reviewed-on: https://go-review.googlesource.com/12392
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The findmoduledatap function will not return nil in ordinary use, but
check for nil to try to avoid crashing when we are already crashing.
Update #11783.
Change-Id: If7b1adb51efab13b4c1a37b6f3c9ad22641a0b56
Reviewed-on: https://go-review.googlesource.com/12391
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The default value for error is nil so there is no need to assign this
value here.
Change-Id: I4714ef7607996ccbf91b704390e1d1d39ee3847b
Reviewed-on: https://go-review.googlesource.com/12355
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Old style. Make it compliant with our code review comments document.
Also, make WriteString's return parameter named 'n', not 'ret', for
consistency.
Noticed during another documentation review.
Change-Id: Ie88910c5841f8353bc5c0152e2168b497578e15e
Reviewed-on: https://go-review.googlesource.com/12324
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We shouldn't guarantee this behavior, but suggest it's possible.
Change-Id: I4c2afb48b99be4d91537306d3337171a13c9990a
Reviewed-on: https://go-review.googlesource.com/12346
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The change https://golang.org/cl/12192 changed the get code to use the
list of package imports, not the computed list of dependencies, as the
computed list could be out of date if the package changed when using
go get -u. Computing the dependency list would skip an import of "C",
but that would still be on the package import list. This changes the
code to skip "C" when walking the import list.
No test--the best test would be to add an import of "C" to
github.com/rsc/go-get-issue-9224-cmd for TestGoGetUpdate.
Fixes#11738.
Change-Id: Id89ddafeade2391d15688bfd142fafd67844a941
Reviewed-on: https://go-review.googlesource.com/12322
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Updates #10061
CL 12353 updated the documentation for os.Rename to stipulate the function will
return errors of type *os.LinkError. This CL adds a test to ensure that the
implementations continue to obey this contract.
Change-Id: I41beb8c9d8356c737de251fdc6f652caab3ee636
Reviewed-on: https://go-review.googlesource.com/12329
Reviewed-by: Ian Lance Taylor <iant@golang.org>
No code changes. Just make it clear that runtime.GC is not concurrent.
Change-Id: I00a99ebd26402817c665c9a128978cef19f037be
Reviewed-on: https://go-review.googlesource.com/12345
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The document `doc/go_spec.html` uses "preceeding" instead of the word
"preceding" in one place.
Fixed another occurrence in `src/go/types/typexpr.go`.
Change-Id: Ic67f62026b5c9d002c5c5632299f14ecac8b02ae
Reviewed-on: https://go-review.googlesource.com/12354
Reviewed-by: Ian Lance Taylor <iant@golang.org>
An out-of-date comment snuck in to cc8f544. Remove it.
Change-Id: I5bc7c17e737d1cabe57b88de06d7579c60ca28ff
Reviewed-on: https://go-review.googlesource.com/12328
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Rename should document that it returns *LinkError,
like Create and Stat do.
Fixes#10061
Change-Id: I7bfe8b0267f6c4a57dd6b26cba44928714711724
Reviewed-on: https://go-review.googlesource.com/12353
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This fixes a race between 1) sweeping and freeing an unmarked large
span and 2) reusing that span and allocating from it. This race arises
because mSpan_Sweep returns spans for large objects to the heap
*before* heapBitsSweepSpan clears the mark bit on the object in the
span.
Specifically, the following sequence of events can lead to an
incorrectly zeroed bitmap byte, which causes the garbage collector to
not trace any pointers in that object (the pointer bits for the first
four words are cleared, and the scan bits are also cleared, so it
looks like a no-scan object).
1) P0 calls mSpan_Sweep on a large span S0 with an unmarked object on it.
2) mSpan_Sweep calls heapBitsSweepSpan, which invokes the callback for
the one (unmarked) object on the span.
3) The callback calls mHeap_Free, which makes span S0 available for
allocation, but this is too early.
4) P1 grabs this S0 from the heap to use for allocation.
5) P1 allocates an object on this span and writes that object's type
bits to the bitmap.
6) P0 returns from the callback to heapBitsSweepSpan.
heapBitsSweepSpan clears the byte containing the mark, even though
this span is now owned by P1 and this byte contains important
bitmap information.
This fixes this problem by simply delaying the mHeap_Free until after
the heapBitsSweepSpan. I think the overall logic of mSpan_Sweep could
be simplified now, but this seems like the minimal change.
Fixes#11617.
Change-Id: I6b1382c7e7cc35f81984467c0772fe9848b7522a
Reviewed-on: https://go-review.googlesource.com/12320
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Adjusts for the move from golang.org/x/tools/go/types and .../go/exact
to go/types and go/constant in the main repository.
Change-Id: I0da7248c540939e3e9b09c915b0a296937f1be73
Reviewed-on: https://go-review.googlesource.com/12284
Reviewed-by: Andrew Gerrand <adg@golang.org>
At least the most important parts, I think.
Fixes#10552
Change-Id: I1a03c5405bdbef337e0245d226e9247d3d067393
Reviewed-on: https://go-review.googlesource.com/12246
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The iOS simulator compiles with GOOS=darwin GOARCH=386, and x509
sets the inappropriate flag -mmacosx-version-min=10.6. Condition
its compilation on the absence of an "ios" build tag.
Fixes#11736.
Change-Id: I4aa230643347320c3cb9d03b972734b2e0db930e
Reviewed-on: https://go-review.googlesource.com/12301
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This seems to have broken arm64 in a mysterious way. Will try again later.
This reverts commit 0a3c991fd3.
Change-Id: Ic1b53413c4168977a27381d9cc6fb8d9d7cbb780
Reviewed-on: https://go-review.googlesource.com/12245
Reviewed-by: Russ Cox <rsc@golang.org>
If we receive an HTTP request with "Expect: 100-continue" and the
Handler never read to EOF, the conn is in an unknown state.
Don't reuse that connection.
Fixes#11549
Change-Id: I5be93e7a54e899d615b05f72bdcf12b25304bc60
Reviewed-on: https://go-review.googlesource.com/12262
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Now that we care about the protocol of Git remotes (for the -insecure
flag), we need to recognize and parse the SCP-like remote format.
Fixesgolang/go#11457
Change-Id: Ia26132274fafb1cbfefe2475f7ac5f17ccd6da40
Reviewed-on: https://go-review.googlesource.com/12226
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Running a safe-point function on syscall entry uses systemstack() and
hence clobbers g.sched.pc and g.sched.sp. Fix this by re-saving them
after the systemstack, just like in the other uses of systemstack in
reentersyscall.
Change-Id: I47868a53eba24d81919fda56ef6bbcf72f1f922e
Reviewed-on: https://go-review.googlesource.com/12125
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, we run a P's safe-point function immediately after entering
_Psyscall state. This is unsafe, since as soon as we put the P in
_Psyscall, we no longer control the P and another M may claim it.
We'll still run the safe-point function only once (because doing so
races on an atomic), but the P may no longer be at a safe-point when
we do so.
In particular, this means that the use of forEachP to dispose all P's
gcw caches is unsafe. A P may enter a syscall, run the safe-point
function, and dispose the P's gcw cache concurrently with another M
claiming the P and attempting to use its gcw cache. If this happens,
we may empty the gcw's workbuf after putting it on
work.{full,partial}, or add pointers to it after putting it in
work.empty. This will cause an assertion failure when we later pop the
workbuf from the list and its object count is inconsistent with the
list we got it from.
Fix this by running the safe-point function just before putting the P
in _Psyscall.
Related to #11640. This probably fixes this issue, but while I'm able
to show that we can enter a bad safe-point state as a result of this,
I can't reproduce that specific failure.
Change-Id: I6989c8ca7ef2a4a941ae1931e9a0748cbbb59434
Reviewed-on: https://go-review.googlesource.com/12124
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
There was already special code to recognize "?" in hidden_structdcl,
which is used for inlined types and variables. This recognizes "?" in
structdcl as well, a case that arises when a struct type appears
within an inlined function body.
Fixes#10219.
Change-Id: Ic5257ae54f817e0d4a189c2294dcd633c9f2101a
Reviewed-on: https://go-review.googlesource.com/12241
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The parser treats (R1+R2) on ppc64 the same as (R1,R2) on arm,
but it is not strictly a "register pair". Improve the text.
No semantic change.
Change-Id: Ib8b14881c6467add0d53150a901c01e962afb28b
Reviewed-on: https://go-review.googlesource.com/12212
Reviewed-by: Russ Cox <rsc@golang.org>
- Make Log2 exact for powers of two.
- Fix error tolerance function to make tolerance
a function of the correct (expected) value.
Fixes#9066.
Change-Id: I0320a93ce4130deed1c7b7685627d51acb7bc56d
Reviewed-on: https://go-review.googlesource.com/12230
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Originally 'go test -h' printed the output of 'go help test'.
Then issue #6576 was filed, because that output didn't list (for example) -bench.
CL 14502065 changed 'go test -h' to print the output of 'go help testflag'.
Then issue #9209 was filed, because that output didn't list (for example) -c.
To print all the relevant flags, parts of both 'go help test' and 'go help testflag'
are needed. Refactor the help messages to make those parts available
and print them.
Fixes#9209.
Change-Id: Ie8205b8fb37d00c10d25b3fc98f14286ec46c4e3
Reviewed-on: https://go-review.googlesource.com/12173
Reviewed-by: Rob Pike <r@golang.org>
Before, calling the RGBA method of YCbCr color would return red values
in the range [0x0080, 0xff80]. After, the range is [0x0000, 0xffff] and
is consistent with what Gray colors' RGBA method returns. In particular,
pure black, pure white and every Gray color in between are now exactly
representable as a YCbCr color.
This fixes a regression from Go 1.4 (where YCbCr{0x00, 0x80, 0x80} was
no longer equivalent to pure black), introduced by golang.org/cl/8073 in
the Go 1.5 development cycle. In Go 1.4, the +0x80 rounding was not
noticable when Cb == 0x80 && Cr == 0x80, because the YCbCr to RGBA
conversion truncated to 8 bits before multiplying by 0x101, so the
output range was [0x0000, 0xffff].
The TestYCbCrRoundtrip fuzzy-match tolerance grows from 1 to 2 because
the YCbCr to RGB conversion now maps to an ever-so-slightly larger
range, along with the usual imprecision of accumulating rounding errors.
Also s/int/int32/ in ycbcr.go. The conversion shouldn't overflow either
way, as int is always at least 32 bits, but it does make it clearer that
the computation doesn't depend on sizeof(int).
Fixes#11691
Change-Id: I538ca0adf7e040fa96c5bc8b3aef4454535126b9
Reviewed-on: https://go-review.googlesource.com/12220
Reviewed-by: Rob Pike <r@golang.org>
Fixes#10963.
Change-Id: I8d769b4d25b306f2df41f882ec01d97bbd63171d
Reviewed-on: https://go-review.googlesource.com/12221
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Fixes#10338.
Change-Id: Ib86cb9a6c694b1e442a9957153c7ca38a7d11c3e
Reviewed-on: https://go-review.googlesource.com/12232
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#3652. (Well, already fixed, but tests that it stays fixed.)
Change-Id: I4e17f595ee2ad513de86ac3861e8e66b1230b3be
Reviewed-on: https://go-review.googlesource.com/12195
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#9224.
Change-Id: Ie0f4f14407099e4fa7ebe361a95b6492012928a2
Reviewed-on: https://go-review.googlesource.com/12192
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This fix only works on Git 2.3.0 and later.
There appears to be no portable way to fix the earlier versions.
We already run git with stdin closed, but on Unix git calls getpass,
which opens /dev/tty itself. We could do package syscall-specific
things to get /dev/tty invalidated during the exec, but I'd really
rather not. And on Windows, Git opens "CONIN$" and "CONOUT$"
itself, and I have no idea how to invalidate those.
Fix the problem for newish Git versions and wait for people to update.
Best we can do.
Fixes#9341.
Change-Id: I576579b106764029853e0f74d411e19108deecf5
Reviewed-on: https://go-review.googlesource.com/12175
Reviewed-by: Rob Pike <r@golang.org>
Fixes#11305.
Change-Id: Icaa3a009aa4ab214c9aaf74f52c3e622fa266a9d
Reviewed-on: https://go-review.googlesource.com/12194
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
