This test runs 'go test -race -i runtime/race' and checks that it did
not overwrite cmd/cgo.
If GOROOT/pkg is read-only and GOROOT/pkg/$GOOS_$GOARCH_race is not
already populated, as are the conditions if the Go toolchain was
installed from source as root using 'make.bash', then 'go test -race
-i' itself will fail because it cannot install packages to GOROOT/pkg.
However, such a failure is not relevant to the test: even if 'go test
-race -i' fails, we can still verify that it did not incidentally
overwrite cmd/cgo.
Updates #28387
Updates #30316
Change-Id: Iff2f75a0aeb4c926290ac3062c83695604522078
Reviewed-on: https://go-review.googlesource.com/c/go/+/207959
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The darwin-arm64-correlium builder was failing the test consistently
at the old values. Give the ticks more time to let the test pass.
Updates #35692
Change-Id: Ibc636cd4db2595c82f4e8c6c822c3df4c2b7e0a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/207839
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Handle immediates larger than 12-bits by rewriting as an LUI instruction with
the high bits, followed by the original instruction with the low bits.
Based on the riscv-go port.
Updates #27532
Change-Id: I8ed6d6e6db06fb8a27f3ab75f467ec2b7ff1f075
Reviewed-on: https://go-review.googlesource.com/c/go/+/204626
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Dan Scales pointed out a theoretical deadlock in the runtime.
The timer code runs timer functions while holding the timers lock for a P.
The scavenger queues up a timer function that calls wakeScavenger,
which acquires the scavenger lock.
The scavengeSleep function acquires the scavenger lock,
then calls resetTimer which can call addInitializedTimer
which acquires the timers lock for the current P.
So there is a potential deadlock, in that the scavenger lock and
the timers lock for some P may both be acquired in different order.
It's not clear to me whether this deadlock can ever actually occur.
Issue 35532 describes another possible deadlock.
The pollSetDeadline function acquires pd.lock for some poll descriptor,
and in some cases calls resettimer which can in some cases acquire
the timers lock for the current P.
The timer code runs timer functions while holding the timers lock for a P.
The timer function for poll descriptors winds up in netpolldeadlineimpl
which acquires pd.lock.
So again there is a potential deadlock, in that the pd lock for some
poll descriptor and the timers lock for some P may both be acquired in
different order. I think this can happen if we change the deadline
for a network connection exactly as the former deadline expires.
Looking at the code, I don't see any reason why we have to hold
the timers lock while running a timer function.
This CL implements that change.
Updates #6239
Updates #27707Fixes#35532
Change-Id: I17792f5a0120e01ea07cf1b2de8434d5c10704dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/207348
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Take the opportunity of deflaking to make it take less time to run.
Updates #35537
Change-Id: I91ca8094fbe18fbfcd34dfda98da1592c9c82943
Reviewed-on: https://go-review.googlesource.com/c/go/+/207403
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This will help to detect regressions of #28387 when running
'go test cmd/go' in a writable GOROOT.
Updates #28387
Updates #30316
Change-Id: I551e044111535404688b1a76e63163dfcb41bb5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/207701
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The old recipe for making an infinite loop not be infinite
in the debugger could create an instruction (Prog) with a
line number not tied to any file (index == 0). This caused
downstream failures in DWARF processing.
So don't do that. Also adds a test, also adds a check+panic
to ensure that the next time this happens the error is less
mystifying.
Fixes#35652
Change-Id: I04f30bc94fdc4aef20dd9130561303ff84fd945e
Reviewed-on: https://go-review.googlesource.com/c/go/+/207613
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It was attempting to write a test binary to the working directory.
Updates #28387
Updates #30316
Change-Id: I82eca3a8a3e019dc6dacbe1f02a0583577694b93
Reviewed-on: https://go-review.googlesource.com/c/go/+/207614
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also convert associated tests of GOPATH and 'go install' so that we
can remove the corresponding source file from testdata/src.
Updates #28387
Updates #30316
Change-Id: Id8c2fde4dc88954b29aefe71c9fa7e974a2ca932
Reviewed-on: https://go-review.googlesource.com/c/go/+/207605
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
I'm hoping to eliminate testdata/src/go-cmd-test, so porting over
tests that assume its existence.
Updates #28387
Updates #30316
Change-Id: I20bae780a4eb87cc19cc1e8531b84ab4a8a3c255
Reviewed-on: https://go-review.googlesource.com/c/go/+/207608
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
These tests were all attempting to write to their working directory,
which may fail if GOROOT is read-only.
Updates #28387
Updates #30316
Change-Id: Ib85234cdcf5ef4d554d8c99cf0942981bbd394ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/207604
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
When initializing an M, we set up its signal stack to the gsignal
stack if an alternate signal stack is not already set. On Android,
an alternate signal stack is always set, even cgo is not used.
This breaks the logic of saving/fetching G on the signal stack
during VDSO, which assumes the signal stack is allocated by Go if
cgo is not used (if cgo is used, we use TLS for saving G).
When cgo is not used, we can always use the Go signal stack, even
if an alternate signal stack is already set. Since cgo is not
used, no one other than the Go runtime will care.
Fixes#35554.
Change-Id: Ia9d84cd55cb35097f3df46f37996589c86f10e0f
Reviewed-on: https://go-review.googlesource.com/c/go/+/207445
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
tabs.getSelected has been deprecated since Chrome 33. Instead,
use tabs.query.
Fixes#35663
Change-Id: I4f7f17f948987aff8409ac8210f04eb1f7ebf908
Reviewed-on: https://go-review.googlesource.com/c/go/+/207402
Reviewed-by: Andrew Bonventre <andybons@golang.org>
This reverts CL 207477, restoring CL 207352 with a fix for the
regression observed in the Windows builders.
cmd/compile evidently does not fully support NUL as an output on
Windows, so this time we write ignored 'compile' outputs
to temporary files (instead of os.DevNull as in CL 207352).
Updates #28387Fixes#35619
Change-Id: I2edc5727c3738fa1bccb4b74e50d114cf2a7fcff
Reviewed-on: https://go-review.googlesource.com/c/go/+/207602
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 206078 introduced a stray errno check that was always false. This CL removes it.
Updates #35276
Change-Id: I6996bb595d347fe81752786a3d83d3432735c9cb
GitHub-Last-Rev: e026e71b16
GitHub-Pull-Request: golang/go#35650
Reviewed-on: https://go-review.googlesource.com/c/go/+/207577
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This allows maphash.Hash to be allocated on the stack for typical uses.
Fixes#35636
Change-Id: I8366507d26ea717f47a9fb46d3bd69ba799845ac
Reviewed-on: https://go-review.googlesource.com/c/go/+/207444
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On AIX, addresses returned by mmap are between 0x0a00000000000000
and 0x0afffffffffffff. The previous solution to handle these large
addresses was to increase the arena size up to 60 bits addresses,
cf CL 138736.
However, with the new page allocator, the 60bit heap addresses are
causing huge memory allocations, especially by (s *pageAlloc).init. mmap
and munmap syscalls dealing with these allocations are reducing
performances of every Go programs.
In order to avoid these allocations, arenaBaseOffset is set to
0x0a00000000000000 and heap addresses are on 48bit, as others operating
systems.
Updates: #35451
Change-Id: Ice916b8578f76703428ec12a82024147a7592bc0
Reviewed-on: https://go-review.googlesource.com/c/go/+/206841
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The test is inherently slightly flaky, so repeat to reduce flakiness.
Fixes#35537
Change-Id: Id918d48d33c7d5e19c4f24df104adc7fbf3720f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/207457
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When we run tests, we may need to write the test binary (and/or test
variants of its dependencies) to GOCACHE. (This also fixes several
test cases in cmd/go, which preserves the GOCACHE variable for
efficiency.)
It is highly unlikely that tests will try to modify .git, and that
directory contains many files, so don't bother with it.
Updates #30316
Change-Id: Id11136c6c64d8f0afc6c6ba5d94c9269df231052
Reviewed-on: https://go-review.googlesource.com/c/go/+/207441
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 205340 changed the linker to skip certain flags when linking
for iOS. However, for host linking on iOS (such as on the Corellium
darwin/arm64 builders) the MachO platform defaults to PLATFORM_MACOS,
and the flags are not skipped.
Avoids warnings such as
ld: warning: -no_pie ignored for arm64
Updates #32963
Change-Id: Ib6b4c2375fd14cf89410bf5ff1537b692b7a1c15
Reviewed-on: https://go-review.googlesource.com/c/go/+/206337
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
While running various tests for #28387, I keep ending up with an
unwritable GOROOT after a failure.
While the unwritable GOROOT is a fairly exotic condition (normally
only happens on builders), it's somewhat annoying when debugging, so
I'm switching all of the log.Fatal* call sites to use the existing
fatalf function, which supports general atexit-like cleanup.
Updates #28387
Change-Id: I473cda7eacd9ad82bdeab647766373126dc7390e
Reviewed-on: https://go-review.googlesource.com/c/go/+/207341
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In scavengeOne's fast path, we currently don't check the summary for the
chunk that scavAddr points to, which means that we might accidentally
scavenge unused address space if the previous scavenge moves the
scavAddr into that space. The result of this today is a crash.
This change makes it so that scavengeOne's fast path only happens after
the check, following the comment in mpagealloc.go. It also adds a test
for this case.
Fixes#35465.
Updates #35112.
Change-Id: I861d44ee75e42a0e1f5aaec243bc449228273903
Reviewed-on: https://go-review.googlesource.com/c/go/+/206978
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Go specification says: A value x is assignable to a variable of type T if x
is a bidirectional channel value, T is a channel type, x's type V and T have
identical element types, and at least one of V or T is not a defined type.
However, the current reflection implementation is incorrect which makes
"x is assignable to T" even if type V and T are both defined type.
The current reflection implementation also mistakes the base types of two
non-defined pointer types share the same underlying type when the two
base types satisfy the above mentioned special channel assignability rule.
Fixes#29469
Change-Id: Ia4b9c4ac47dc8e76a11faef422b2e5c5726b78b3
GitHub-Last-Rev: 487c20a564
GitHub-Pull-Request: golang/go#29739
Reviewed-on: https://go-review.googlesource.com/c/go/+/157822
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Like on other 64-bit GOARCHes, EpollEvent needs padding before Fd for
mips64 and mips64le.
Change-Id: I87773a1b305552ab4ed039623b40d2fff1f20d9b
Reviewed-on: https://go-review.googlesource.com/c/go/+/207298
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The 2-instruction TLS access sequence
MOVQ TLS, BX
MOVQ 0(BX)(TLS*1), BX
is not async preemptible, as if it is preempted and resumed on a
different thread, the TLS address may become invalid.
May fix#35349. (This is a rare failure and I haven't been able
to reproduce it.)
Change-Id: Ie1a366fd0d7d73627dc62ee2de01c0aa09365f2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/206903
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
When we receive a signal, if G is nil we call badsignal, which
calls needm. When cgo is not used, there is no extra M, so needm
will just hang. In this situation, even GOTRACEBACK=crash cannot
get a stack trace, as we're in the signal handler and cannot
receive another signal (SIGQUIT).
Instead, just crash.
For #35554.
Updates #34391.
Change-Id: I061ac43fc0ac480435c050083096d126b149d21f
Reviewed-on: https://go-review.googlesource.com/c/go/+/206959
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The existing implementation is erroneously assume that having no
deadline in context.Context means that time returned from Deadline
method will have IsZero() == true. But technically speaking this is an
invalid assumption. The context.Context interface specification doesn't
specify what time should be returned from Deadline method when there is
no deadline set. It only specifies that second result of Deadline should
be false.
Fixes#35594
Change-Id: Ife00aad77ab3585e469f15017550ac6c0431b140
Reviewed-on: https://go-review.googlesource.com/c/go/+/207297
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When -trimpath is used, packages built from the module cache still
have debug into that contains the module path and version. Only the
module cache directory is stripped.
With this CL, we now include the module path and version in the cache
key for build actions.
Fixes#35412
Change-Id: I1956592d0d86fcea2cca7c5fc8957e83543d6aa2
Reviewed-on: https://go-review.googlesource.com/c/go/+/207317
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The NDK is switching to ldd, and will stop including the gold linker.
Change-Id: If74168017c9874134b34010906ab1d94001528b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/206840
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
tryAdd shouldn't succeed (and accept the new frame) if the last
existing frame on the deck is not an inlined frame.
For example, when we see the followig stack
[300656 300664 300655 300664]
with each PC corresponds to
[{PC:300656 Func:nil Function:runtime.nanotime File:/workdir/go/src/runtime/time_nofake.go Line:19 Entry:300416 {0x28dac8 0x386c80}}]
[{PC:300664 Func:0x28dac8 Function:runtime.checkTimers File:/workdir/go/src/runtime/proc.go Line:2623 Entry:300416 {0x28dac8 0x386c80}}]
[{PC:300655 Func:nil Function:runtime.nanotime File:/workdir/go/src/runtime/time_nofake.go Line:19 Entry:300416 {0x28dac8 0x386c80}}]
[{PC:300664 Func:0x28dac8 Function:runtime.checkTimers File:/workdir/go/src/runtime/proc.go Line:2623 Entry:300416 {0x28dac8 0x386c80}}]
PC:300656 and PC:300664 belong to a single location entry,
but the bug in the current tryAdd logic placed the entire stack into one
location entry.
Also adds tests - this crash is a tricky case to test because I think it
should happen with normal go code. The new TestTryAdd simulates it by
using fake call sequences. The test crashed without the fix.
Update #35538
Change-Id: I6d3483f757abf4c429ab91616e4def90832fc04a
Reviewed-on: https://go-review.googlesource.com/c/go/+/206958
Reviewed-by: Keith Randall <khr@golang.org>
