DNS responses which do not contain answers of the requested type return
errNoSuchHost, the same error as rcode name error. Prior to
golang.org/cl/37879, both cases resulted in no additional name servers
being consulted for the question. That CL changed the behavior for both
cases. Issue #25336 was filed about the rcode name error case and
golang.org/cl/113815 fixed it. This CL fixes the no answers of requested
type case as well.
Fixes#27525
Change-Id: I52fadedcd195f16adf62646b76bea2ab3b15d117
Reviewed-on: https://go-review.googlesource.com/133675
Run-TryBot: Ian Gudger <igudger@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I omitted vendor directories and anything necessary for bootstrapping.
(Tested by bootstrapping with Go 1.4)
Updates #27864
Change-Id: I7d9b68d0372d3a34dee22966cca323513ece7e8a
Reviewed-on: https://go-review.googlesource.com/137856
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix the code to use write barriers on heap memory, and no
write barriers on stack memory.
These errors were discoverd as part of fixing #27695. They may
have something to do with that issue, but hard to be sure.
The core cause is different, so this fix is a separate CL.
Update #27695
Change-Id: Ib005f6b3308de340be83c3d07d049d5e316b1e3c
Reviewed-on: https://go-review.googlesource.com/137438
Reviewed-by: Austin Clements <austin@google.com>
We already aliased mSpanInUse to _MSpanInUse. The dual constants are
getting annoying, so fix all of these to use the mSpan* naming
convention.
This was done automatically with:
sed -i -re 's/_?MSpan(Dead|InUse|Manual|Free)/mSpan\1/g' *.go
plus deleting the existing definition of mSpanInUse.
Change-Id: I09979d9d491d06c10689cea625dc57faa9cc6767
Reviewed-on: https://go-review.googlesource.com/137875
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change updates the expected output of the gdb debugging session
in the TestNexting internal/ssa test, aligning it with the changes
introduced in CL 134555.
Fixes#27863
Change-Id: I29e747930c7668b429e8936ad230c4d6aa24fdac
Reviewed-on: https://go-review.googlesource.com/137455
Reviewed-by: Than McIntosh <thanm@google.com>
it looks like we should abort trying to configure the http2 transport
again, once it has been configured already.
Otherwise there will be no effect of these checks and changes, as they
will be overridden later again and the disable logic below will have no
effect, too.
So it really looks like we just forgot a return statement here.
Change-Id: Ic99b3bbc662a4e1e1bdbde77681bd1ae597255ad
Reviewed-on: https://go-review.googlesource.com/134795
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It's possible for a local import path to refer to a standard library
package. This was not being correctly handled for gccgo. When using
gccgo, change the code to permit the existing lexical test, and to
accept a missing directory for a standard package found via a local
impor path.
Change-Id: Ia9829e55c0ff62e7d1f01a1d6dc9fcff521501ca
Reviewed-on: https://go-review.googlesource.com/137439
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The module code in cmd/go sometimes needs to know whether it is
looking at a standard package, and currently uses gc-specific code for
that. This CL moves the existing isStandardPackage code in the
go/build package, which works for both gc and gccgo, into a new
internal/goroot package so that cmd/go can call it. The changes to
cmd/go will be in a subsequent CL.
Change-Id: Ic1ce4c022a932c6b3e99fa062631577085cc6ecb
Reviewed-on: https://go-review.googlesource.com/137435
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also in TestRelativeGOBINFail change to the test directory, to avoid
picking up whatever files are in the current directory.
Change-Id: Icac576dafa016555a9f27d026d0e965dc5cdfea0
Reviewed-on: https://go-review.googlesource.com/137337
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
user.Current caches the current user after its first call, so changes to
the uid after the first call will not affect its result. As this might
be unexpected, it should be mentioned in the docs.
Fixes#27659
Change-Id: I8b3323d55441d9a79bc9534c6490884d8561889b
Reviewed-on: https://go-review.googlesource.com/136315
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 136796 introduced benchmarks and refactored tests to use a
common list of test images. The tests now fail when run with
count > 2 since they rely on a fresh image each run.
Fix this by changing the list of test images to a list of test
image generator functions.
Change-Id: I5884c6bccba5e29bf84ee546fa501bc258379f42
Reviewed-on: https://go-review.googlesource.com/137295
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Bit packs image data when writing images with fewer than 16
colors in its palette. Reading of bit packed image data was
already implemented.
Fixes#19879
Change-Id: I0a06f9599a163931e20d3503fc3722e5101f0070
Reviewed-on: https://go-review.googlesource.com/134235
Reviewed-by: Nigel Tao <nigeltao@golang.org>
CL 136855 removed the encoding/binary dependency from the checkbce.go
test by defining a local Uint64 to fix the noopt builder; then a more
general mechanism to skip tests on the noopt builder was introduced in
CL 136898, so we can now restore the binary.Uint64 calls in testbce.
Change-Id: I3efbb41be0bfc446a7e638ce6a593371ead2684f
Reviewed-on: https://go-review.googlesource.com/137056
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Provide an example for each of the printing functions (Print,
Sprintf, Fprintln etc.), and make them all produce the same output
so their usage can be compared.
Also add a package-level example explaining the difference between
how Printf, Println, and Print behave.
There are more examples to come.
Update #27554.
Change-Id: Ide03e5233f3762a9ee2ac0269f534ab927562ce2
Reviewed-on: https://go-review.googlesource.com/136615
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#27802.
Change-Id: I7ea9f7279300a55b0cb851893edc591a6f84e324
Reviewed-on: https://go-review.googlesource.com/136758
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There is much left out here—the space of possibilities is very
large—but this example shows all that most programmers will need
to know for most printing problems.
Update #27554.
Change-Id: Ib6ae651d5c3720cf7fe1a05ffd0859a5b56a9157
Reviewed-on: https://go-review.googlesource.com/136616
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds a new build tag "gcflags_noopt" that can be used in test/*.go
tests.
Fixes#27833
Change-Id: I4ea0ccd9e9e58c4639de18645fec81eb24a3a929
Reviewed-on: https://go-review.googlesource.com/136898
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Document what the fields of regalloc mean.
Hopefully will help people understand how the register allocator works.
Change-Id: Ic322ed2019cc839b812740afe8cd2cf0b61da046
Reviewed-on: https://go-review.googlesource.com/137016
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
From https://github.com/golang/go/issues/17659#issuecomment-423113606 ...
> In kubernetes , isDomainName reject Pods "A Record" "pod-ip-address",
> for example: "172-17-0-16", as RFC 3696 section 2 requires
> "top-level domain names not be all-numeric", but this example has
> three hyphen, so I think it should not be reject.
Updates #17659
Change-Id: Ibd8ffb9473d69c45c91525953c09c6749233ca20
Reviewed-on: https://go-review.googlesource.com/136900
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Gudger <igudger@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
&^ and << have equal precedence. Add some parentheses to make sure
we shift before we andnot.
Fixes#27829
Change-Id: Iba8576201f0f7c52bf9795aaa75d15d8f9a76811
Reviewed-on: https://go-review.googlesource.com/136899
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As pointed out in the aftermath of CL 113997, splice is not supported
for SOCK_SEQPACKET or SOCK_DGRAM unix sockets. Don't call poll.Splice
in those cases.
Change-Id: Ieab18fb0ae706fdeb249e3f54d51a3292e3ead62
Reviewed-on: https://go-review.googlesource.com/136635
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The existing URL in comment points to an Alioth page which was
deprecated (and not working), so use the new Benchmarks Game URL.
Change-Id: Ifd694382a44a24c44acbed3fe1b17bca6dab998f
Reviewed-on: https://go-review.googlesource.com/136835
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Implement Lstat with fstatat and Lchown with Fchownat on
linux/amd64, linux/arm and linux/386. Furthermore, implement Stat
with fstatat on linux/arm and linux/386. Linux/arm64 already had
similar replacements.
The fstatat and fchownat system calls were added in kernel 2.6.16,
which is before the Go minimum, 2.6.23.
The three syscalls then match the android bionic implementation
and avoids the Android O seccomp filter.
Fixes#27797
Change-Id: I07fd5506955d454a1a660fef5af0e1ac1ecb0959
Reviewed-on: https://go-review.googlesource.com/136795
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The noopt builder is configured by setting GO_GCFLAGS=-N -l, but the
test/run.go test harness doesn't look at GO_GCFLAGS when processing
"errorcheck" files, it just calls compile:
cmdline := []string{goTool(), "tool", "compile", /* etc */}
This is working as intended, since it makes the tests more robust and
independent from the environment; errorcheck files are supposed to set
additional building flags, when needed, like in:
// errorcheck -0 -N -l
The test/bcecheck.go test used to work on the noopt builder (even if
bce is not active on -N -l) because the test was auto-contained and
the file always compiled with optimizations enabled.
In CL 107355, a new bce test dependent on an external package
(encoding.binary) was added. On the noopt builder the external package
is built using -N -l, and this causes a test failure that broke the
noopt builder:
https://build.golang.org/log/b2be319536285e5807ee9d66d6d0ec4d57433768
To reproduce the failure, one can do:
$ go install -a -gcflags="-N -l" std
$ go run run.go -- checkbce.go
This change fixes the noopt builder breakage by removing the bce test
dependency on encoding/binary by defining a local Uint64() function to
be used in the test.
Change-Id: Ife71aab662001442e715c32a0b7d758349a63ff1
Reviewed-on: https://go-review.googlesource.com/136855
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously consumeValue performed consumption of "unnecessary backslashes"
strictly for non-ASCII and non-token runes. Thus if it encountered a
backslash before a rune that is out of the ASCII range, it would
erroneously skip that backslash. This change now derestricts
"unnecessary backslash" unescaping for all character encodings,
using "isTSpecial" instead of "!isTokenChar".
This change is a follow-up of CL 32175.
Fixes#25888
Change-Id: I5e02bbf9c42f753a6eb31399b8d20315af991490
Reviewed-on: https://go-review.googlesource.com/119795
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The Fetch API returns a null body if there is no response body,
on browsers that support streaming the response body. This
change ensures we check for both undefined and null bodies
before attempting to read the body.
Fixes#27196
Change-Id: I0da86b61284fe394418b4b431495e715a037f335
Reviewed-on: https://go-review.googlesource.com/131236
Reviewed-by: Richard Musiol <neelance@gmail.com>
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cloneHeader duplicates what Header.clone() method is doing. It's
used in a single place, which can be replaced with the use of the
method.
Change-Id: I6e8bbd6c95063f31ca3695f13fa7478873230525
GitHub-Last-Rev: eb08aeae9b
GitHub-Pull-Request: golang/go#27817
Reviewed-on: https://go-review.googlesource.com/136762
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Node.copy used to make a shallow copy of a node. Often, this is not
correct: If a node n's Orig field pointed to itself, the copy's Orig
field has to be adjusted to point to the copy. Otherwise, if n is
modified later, the copy's Orig appears modified as well (because it
points to n).
This was fixed for one specific case with
https://go-review.googlesource.com/c/go/+/136395 (issue #26855).
This change instead addresses copy in general:
In two cases we don't want the Orig adjustment as it causes escape
analysis output to fail (not match the existing error messages).
rawcopy is used in those cases.
In several cases Orig is set to the copy immediately after making
a copy; a new function sepcopy is used there.
Updates #26855.
Fixes#27765.
Change-Id: Idaadeb5c4b9a027daabd46a2361348f7a93f2b00
Reviewed-on: https://go-review.googlesource.com/136540
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The ADDconstmodify has similar logic with other constmodify like
instructions. This CL optimize them to share code via fallthrough.
And the size of pkg/linux_386/cmd/compile/internal/x86.a decreases
about 0.3KB.
Change-Id: Ibdf06228afde875e8fe8e30851b50ca2be513dd9
Reviewed-on: https://go-review.googlesource.com/136398
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Found while tracking down #26855.
Change-Id: Ice137fe390820ba351e1c7439b6a9a1b3bdc966b
Reviewed-on: https://go-review.googlesource.com/136396
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
See the change and comment in typecheck.go for a detailed explanation.
Fixes#26855.
Change-Id: I7867f948490fc0873b1bd849048cda6acbc36e76
Reviewed-on: https://go-review.googlesource.com/136395
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Use String and GoString methods instead of the xconf names
for the numeric conversion routines.
Also, fixed a couple of comments in fmt.go.
Change-Id: I1b8acdd95dbff3fc30273070fbb1ac4860031a3c
Reviewed-on: https://go-review.googlesource.com/136197
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The fconv flag arguments were 0, FmtSharp, and FmtSharp|FmtSign.
The 0 value was used for binary representation only, which was
readily available via Mpflt.String. Otherwise, FmtSharp was always
passed. FmtSign was used to print the '+' sign in case of a positive
number and only needed for complex number formatting. Instead
implemented cconv and handled it there.
Change-Id: I1f77282f995be9cfda05efb71a0e027836a9da26
Reviewed-on: https://go-review.googlesource.com/136195
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
