This replaces the contiguous heap arena mapping with a potentially
sparse mapping that can support heap mappings anywhere in the address
space.
This has several advantages over the current approach:
* There is no longer any limit on the size of the Go heap. (Currently
it's limited to 512GB.) Hence, this fixes#10460.
* It eliminates many failures modes of heap initialization and
growing. In particular it eliminates any possibility of panicking
with an address space conflict. This can happen for many reasons and
even causes a low but steady rate of TSAN test failures because of
conflicts with the TSAN runtime. See #16936 and #11993.
* It eliminates the notion of "non-reserved" heap, which was added
because creating huge address space reservations (particularly on
64-bit) led to huge process VSIZE. This was at best confusing and at
worst conflicted badly with ulimit -v. However, the non-reserved
heap logic is complicated, can race with other mappings in non-pure
Go binaries (e.g., #18976), and requires that the entire heap be
either reserved or non-reserved. We currently maintain the latter
property, but it's quite difficult to convince yourself of that, and
hence difficult to keep correct. This logic is still present, but
will be removed in the next CL.
* It fixes problems on 32-bit where skipping over parts of the address
space leads to mapping huge (and never-to-be-used) metadata
structures. See #19831.
This also completely rewrites and significantly simplifies
mheap.sysAlloc, which has been a source of many bugs. E.g., #21044,
#20259, #18651, and #13143 (and maybe #23222).
This change also makes it possible to allocate individual objects
larger than 512GB. As a result, a few tests that expected huge
allocations to fail needed to be changed to make even larger
allocations. However, at the moment attempting to allocate a humongous
object may cause the program to freeze for several minutes on Linux as
we fall back to probing every page with addrspace_free. That logic
(and this failure mode) will be removed in the next CL.
Fixes#10460.
Fixes#22204 (since it rewrites the code involved).
This slightly slows down compilebench and the x/benchmarks garbage
benchmark.
name old time/op new time/op delta
Template 184ms ± 1% 185ms ± 1% ~ (p=0.065 n=10+9)
Unicode 86.9ms ± 3% 86.3ms ± 1% ~ (p=0.631 n=10+10)
GoTypes 599ms ± 0% 602ms ± 0% +0.56% (p=0.000 n=10+9)
Compiler 2.87s ± 1% 2.89s ± 1% +0.51% (p=0.002 n=9+10)
SSA 7.29s ± 1% 7.25s ± 1% ~ (p=0.182 n=10+9)
Flate 118ms ± 2% 118ms ± 1% ~ (p=0.113 n=9+9)
GoParser 147ms ± 1% 148ms ± 1% +1.07% (p=0.003 n=9+10)
Reflect 401ms ± 1% 404ms ± 1% +0.71% (p=0.003 n=10+9)
Tar 175ms ± 1% 175ms ± 1% ~ (p=0.604 n=9+10)
XML 209ms ± 1% 210ms ± 1% ~ (p=0.052 n=10+10)
(https://perf.golang.org/search?q=upload:20171231.4)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.23ms ± 1% 2.25ms ± 1% +0.84% (p=0.000 n=19+19)
(https://perf.golang.org/search?q=upload:20171231.3)
Relative to the start of the sparse heap changes (starting at and
including "runtime: fix various contiguous bitmap assumptions"),
overall slowdown is roughly 1% on GC-intensive benchmarks:
name old time/op new time/op delta
Template 183ms ± 1% 185ms ± 1% +1.32% (p=0.000 n=9+9)
Unicode 84.9ms ± 2% 86.3ms ± 1% +1.65% (p=0.000 n=9+10)
GoTypes 595ms ± 1% 602ms ± 0% +1.19% (p=0.000 n=9+9)
Compiler 2.86s ± 0% 2.89s ± 1% +0.91% (p=0.000 n=9+10)
SSA 7.19s ± 0% 7.25s ± 1% +0.75% (p=0.000 n=8+9)
Flate 117ms ± 1% 118ms ± 1% +1.10% (p=0.000 n=10+9)
GoParser 146ms ± 2% 148ms ± 1% +1.48% (p=0.002 n=10+10)
Reflect 398ms ± 1% 404ms ± 1% +1.51% (p=0.000 n=10+9)
Tar 173ms ± 1% 175ms ± 1% +1.17% (p=0.000 n=10+10)
XML 208ms ± 1% 210ms ± 1% +0.62% (p=0.011 n=10+10)
[Geo mean] 369ms 373ms +1.17%
(https://perf.golang.org/search?q=upload:20180101.2)
name old time/op new time/op delta
Garbage/benchmem-MB=64-12 2.22ms ± 1% 2.25ms ± 1% +1.51% (p=0.000 n=20+19)
(https://perf.golang.org/search?q=upload:20180101.3)
Change-Id: I5daf4cfec24b252e5a57001f0a6c03f22479d0f0
Reviewed-on: https://go-review.googlesource.com/85887
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The scanner assumed that ~ really meant ^, which may be helpful when
coming from C. But ~ is not a valid Go token, and pretending that it
should be ^ can lead to confusing error messages. Better to be upfront
about it and complain about the invalid character in the first place.
This was code "inherited" from the original yacc parser which was
derived from a C compiler. It's 10 years later and we can probably
assume that people are less confused about C and Go.
Fixes#23587.
Change-Id: I8d8f9b55b0dff009b75c1530d729bf9092c5aea6
Reviewed-on: https://go-review.googlesource.com/94160
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Assume that an expression that is not a function call in a defer/go
statement is indeed a function that is just missing its invocation.
Report the error but continue with a sane syntax tree.
Fixes#23586.
Change-Id: Ib45ebac57c83b3e39ae4a1b137ffa291dec5b50d
Reviewed-on: https://go-review.googlesource.com/94156
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, if we typechecked a statement like
var x bool = p1.f == p2.f && p1.g == p2.g
we would correctly update the '&&' node's type from 'untyped bool' to
'bool', but the '==' nodes would stay 'untyped bool'. This is
inconsistent, and caused consistency checks during walk to fail.
This CL doesn't pass toolstash because it seems to slightly affect the
register allocator's heuristics. (Presumably 'untyped bool's were
previously making it all the way through SSA?)
Fixes#23414.
Change-Id: Ia85f8cfc69b5ba35dfeb157f4edf57612ecc3285
Reviewed-on: https://go-review.googlesource.com/94022
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The tag was overwritten by the code for special handling unnamed
parameters.
Fixes#23045.
Change-Id: Ie2e1db3e902a07a2bbbc2a3424cea300f0a42cc3
Reviewed-on: https://go-review.googlesource.com/82775
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Per the language spec clarification in https://golang.org/cl/14727.
Updates #12576
Updates #12621
Change-Id: I1e459c3c11a571bd29582761faacaa9ca3178ba6
Reviewed-on: https://go-review.googlesource.com/91895
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The sub-word shifts need to sign-extend before shifting, to avoid
bringing in data from higher in the argument.
Fixes#23812
Change-Id: I0a95a0b49c48f3b40b85765bb4a9bb492be0cd73
Reviewed-on: https://go-review.googlesource.com/93716
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Fixes#23732
Disambiguate "too few" or "too many" values in struct
initializer messages by reporting the name of the literal.
After:
issue23732.go:27:3: too few values in Foo literal
issue23732.go:34:12: too many values in Bar literal
issue23732.go:40:6: too few values in Foo literal
issue23732.go:40:12: too many values in Bar literal
Change-Id: Ieca37298441d907ac78ffe960c5ab55741a362ef
Reviewed-on: https://go-review.googlesource.com/93277
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that the buffered write barrier is implemented for all
architectures, we can remove the old eager write barrier
implementation. This CL removes the implementation from the runtime,
support in the compiler for calling it, and updates some compiler
tests that relied on the old eager barrier support. It also makes sure
that all of the useful comments from the old write barrier
implementation still have a place to live.
Fixes#22460.
Updates #21640 since this fixes the layering concerns of the write
barrier (but not the other things in that issue).
Change-Id: I580f93c152e89607e0a72fe43370237ba97bae74
Reviewed-on: https://go-review.googlesource.com/92705
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When loading multiple elements of an array into a single register,
make sure we treat them as unsigned. When treated as signed, the
upper bits might all be set, causing the shift-or combo to clobber
the values higher in the register.
Fixes#23719.
Change-Id: Ic87da03e9bd0fe2c60bb214b99f846e4e9446052
Reviewed-on: https://go-review.googlesource.com/92335
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
The fix is CL 91035.
Build only with gccgo at the moment, as it hits issue #23546.
Updates #23545.
Change-Id: I3a1367bb31b04773d31f71016f8fd7bd1855d7b5
Reviewed-on: https://go-review.googlesource.com/89735
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The compiler allows code to have multiple differently-typed views of a
single argument. For instance, if we have
func f(x float64) {
y := *(*int64)(unsafe.Pointer(&x))
...
}
Then in SSA we get two OpArg ops, one with float64 type and one with
int64 type.
The compiler will try to reuse argument slots for spill slots. It
checks that the argument slot is dead by consulting an interference
graph.
When building the interference graph, we normally ignore cross-type
edges because the values on either end of that edge can't be allocated
to the same slot. (This is just a space-saving optimization.) This
rule breaks down when one of the values is an argument, because of the
multiple views described above. If we're spilling a float64, it is not
enough that the float64 version of x is dead; the int64 version of x
has to be dead also.
Remove the optimization of not recording interference edges if types
don't match. That optimization is incorrect if one of the values
connected by the edge is an argument.
Fixes#23522
Change-Id: I361f85d80fe3bc7249014ca2c3ec887c3dc30271
Reviewed-on: https://go-review.googlesource.com/89335
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A Select Op could produce a value with upper 32 bits NOT zeroed,
for example, Div32 is lowered to (Select0 (DIVL x y)).
In theory, we could look into the argument of a Select to decide
whether the upper bits are zeroed. As it is late in release cycle,
just disable this optimization for Select for now.
Fixes#23305.
Change-Id: Icf665a2af9ccb0a7ba0ae00c683c9e349638bf85
Reviewed-on: https://go-review.googlesource.com/85736
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
My previous fix for issue 23179 was incomplete; it turns out that if
an unnamed parameter is below a specific size threshold, it gets
register-promoted away by the compiler (hence not encountered during
some parts of DWARF inline info processing), but if it is sufficiently
large, it is allocated to the stack as a named variable and treated as
a regular parameter by DWARF generation. Interestingly, something in
the ppc64le build of k8s causes an unnamed parameter to be retained
(where on amd64 it is deleted), meaning that this wasn't caught in my
amd64 testing.
The fix is to insure that "_" params are treated in the same way that
"~r%d" return temps are when matching up post-optimization inlined
routine params with pre-inlining declarations. I've also updated the
test case to include a "_" parameter with a very large size, which
also triggers the bug on amd64.
Fixes#23179.
Change-Id: I961c84cc7a873ad3f8f91db098a5e13896c4856e
Reviewed-on: https://go-review.googlesource.com/84975
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The helper routine for returning pre-inlining parameter declarations
wasn't properly handling the case where you have more than one
parameter named "_" in a function signature; this triggered a map
collision later on when the function was inlined and DWARF was
generated for the inlined routine instance.
Fixes#23179.
Change-Id: I12e5d6556ec5ce08e982a6b53666a4dcc1d22201
Reviewed-on: https://go-review.googlesource.com/84755
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This allows errchk to be used with "go vet" output (as opposed to "go tool vet").
Change-Id: I0009a53c9cb74accd5bd3923c137d6dbf9e46326
Reviewed-on: https://go-review.googlesource.com/83836
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We can't currently inline functions that contain closures anyway, so
just delete this budgeting code for now. Re-enable once we can (if
ever) inline functions with nested closures.
Updates #15561.
Fixes#23093.
Change-Id: Idc5f8e042ccfcc8921022e58d3843719d4ab821e
Reviewed-on: https://go-review.googlesource.com/83538
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The package unsafe docs say it's safe to convert an unsafe.Pointer to
uintptr in the argument list to an assembly function, but it was
erroneously only detecting normal pointers converted to unsafe.Pointer
and then to intptr.
Fixes#23051.
Change-Id: Id1be19f6d8f26f2d17ba815191717d2f4f899732
Reviewed-on: https://go-review.googlesource.com/82817
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Pointer arithemetic is done mod 2^32 on 386, so we can just
drop the high bits of any large constant offsets.
The bounds check will make sure wraparounds are never observed.
Fixes#21655
Change-Id: I68ae5bbea9f02c73968ea2b21ca017e5ecb89223
Reviewed-on: https://go-review.googlesource.com/82675
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Make sure that when we're assigning to a map, we evaluate the
right-hand side before we attempt to insert into the map.
We used to evaluate the left-hand side to a pointer-to-slot-in-bucket
(which as a side effect does len(m)++), then evaluate the right-hand side,
then do the assignment. That clearly isn't correct when the right-hand side
might panic.
Fixes#22881
Change-Id: I42a62870ff4bf480568c9bdbf0bb18958962bdf0
Reviewed-on: https://go-review.googlesource.com/81817
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test was added recently as a regress test for the spec relaxation
in #9060, but doesn't work correctly yet. Disable for now to fix noopt
builders.
Updates #22444.
Change-Id: I45c521ae0da7ffb0c6859d6f7220c59828ac6149
Reviewed-on: https://go-review.googlesource.com/81775
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The DWARF inline info generation hooks weren't properly
handling unused auto vars in certain cases, triggering an assert (now
fixed). Also with this change, introduce a new autom "flavor" to
use for autom entries that are added to insure that a specific
auto type makes it into the linker (this is a follow-on to the fix
for 22941).
Fixes#22962.
Change-Id: I7a2d8caf47f6ca897b12acb6a6de0eb25f5cac8f
Reviewed-on: https://go-review.googlesource.com/81557
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Per the decision for #14844, index expressions that are non-constant
shifts where the LHS operand is representable as an int are now valid.
Fixes#21693.
Change-Id: Ifafad2c0c65975e0200ce7e28d1db210e0eacd9d
Reviewed-on: https://go-review.googlesource.com/81277
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The code that generates the list of DWARF variables for a function
(params and autos) will emit a "no-location" entry in the DWARF for a
user var that appears in the original pre-optimization version of the
function but is no longer around when optimization is complete. The
intent is that if a GDB user types "print foo" (where foo has been
optimized out), the response will be "<optimized out>" as opposed to
"there is no such variable 'foo'). This change fixes said code to
include vars on the autom list for the function, to insure that the
type symbol for the variable makes it to the linker.
Fixes#22941.
Change-Id: Id29f1f39d68fbb798602dfd6728603040624fc41
Reviewed-on: https://go-review.googlesource.com/81415
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
ORANGE node's Right node is the expression it is ranging over,
which is evaluated before the loop. In the escape analysis,
we should walk this node without loop depth incremented.
Fixes#21709.
Change-Id: Idc1e4c76e39afb5a344d85f6b497930a488ce5cf
Reviewed-on: https://go-review.googlesource.com/80740
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For "type T = U" we were accidentally emitting a #define for "U__size"
instead of "T__size".
Fixes#22877.
Change-Id: I5ed6757d697753ed6d944077c16150759f6e1285
Reviewed-on: https://go-review.googlesource.com/80759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The signature of the mapassign_fast* routines need to distinguish
the pointerness of their key argument. If the affected routines
suspend part way through, the object pointed to by the key might
get garbage collected because the key is typed as a uint{32,64}.
This is not a problem for mapaccess or mapdelete because the key
in those situations do not live beyond the call involved. If the
object referenced by the key is garbage collected prematurely, the
code still works fine. Even if that object is subsequently reallocated,
it can't be written to the map in time to affect the lookup/delete.
Fixes#22781
Change-Id: I0bbbc5e9883d5ce702faf4e655348be1191ee439
Reviewed-on: https://go-review.googlesource.com/79018
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
CL 76551 modified inline_callers.go to build everything, including the
runtime, with -l=4. While that works in most places (and ideally
should work everywhere), it blows out the nosplit stack on
solaris/amd64.
Fix this by only building the test itself with -l=4.
This undoes some of the changes to this test from CL 73212, which
originally changed the go tool to rebuild all packages with the given
flags. This change modified the expected output of this test, so now
that we can go back to building only the test itself with inlining, we
revert these changes to the expected output. (That CL also changed
log.Fatalf to log.Printf, but didn't add "\n" to the end of the lines,
so this CL fixes that, too.)
Fixes#22797.
Change-Id: I6a91963a59ebe98edbe0921d8717af6b2c2191b0
Reviewed-on: https://go-review.googlesource.com/79197
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Improve the error message for wrong
case-field names in composite literals,
by mentioning the correct field name.
Given the program:
package main
type it struct {
ID string
}
func main() {
i1 := &it{id: "Bar"}
}
just like we do for usage of fields, we now
report wrongly cased fields as hints to give:
ts.go:8:14: unknown field 'id' in struct literal of type it (but does have ID)
instead of before:
ts.go:8:14: unknown field 'id' in struct literal of type it
Fixes#22794
Change-Id: I18cd70e75817025cb1df083503cae306e8d659fd
Reviewed-on: https://go-review.googlesource.com/78545
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This test fails on 1.9.2, but is ok on tip.
CL 77331 has both the 1.9.2 fix and this test, and is on the 1.9 release branch.
This CL is just the test, and is on HEAD. The buggy code doesn't exist on tip.
Update #22683
Change-Id: I04a24bd6c2d3068e18ca81da3347e2c1366f4447
Reviewed-on: https://go-review.googlesource.com/77332
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also, with this change, error locations don't print absolute positions
in [] brackets following positions relative to line directives. To get
the absolute positions as well, specify the -L flag.
Fixes#22660.
Change-Id: I9ecfa254f053defba9c802222874155fa12fee2c
Reviewed-on: https://go-review.googlesource.com/77090
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It has always been problematic that there was no way to specify
tool flags that applied only to the build of certain packages;
it was only to specify flags for all packages being built.
The usual workaround was to install all dependencies of something,
then build just that one thing with different flags. Since the
dependencies appeared to be up-to-date, they were not rebuilt
with the different flags. The new content-based staleness
(up-to-date) checks see through this trick, because they detect
changes in flags. This forces us to address the underlying problem
of providing a way to specify per-package flags.
The solution is to allow -gcflags=pattern=flags, which means
that flags apply to packages matching pattern, in addition to the
usual -gcflags=flags, which is now redefined to apply only to
the packages named on the command line.
See #22527 for discussion and rationale.
Fixes#22527.
Change-Id: I6716bed69edc324767f707b5bbf3aaa90e8e7302
Reviewed-on: https://go-review.googlesource.com/76551
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Plain blocks that contain only uninteresting instructions
(that do not have reliable Pos information themselves)
need to have their Pos left unset so that they can
inherit it from their successors. The "uninteresting"
test was not properly applied and not properly defined.
OpFwdRef does not appear in the ssa.html debugging output,
but at the time of the test these instructions did appear,
and it needs to be part of the test.
Fixes#22365.
Change-Id: I99e5b271acd8f6bcfe0f72395f905c7744ea9a02
Reviewed-on: https://go-review.googlesource.com/74252
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They could get picked up by reflect code, yielding the wrong type.
Fixes#22605
Change-Id: Ie11fb361ca7f3255e662037b3407565c8f0a2c4c
Reviewed-on: https://go-review.googlesource.com/76315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Be more pessimistic when parsing if/switch/for headers for better error
messages when things go wrong.
Fixes#22581.
Change-Id: Ibb99925291ff53f35021bc0a59a4c9a7f695a194
Reviewed-on: https://go-review.googlesource.com/76290
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Updates #21317
@mdempsky fixed issue #21317 with CL 66810,
so lock a test in to ensure we don't regress.
The test is manual for now before test/run.go
has support for matching column numbers so do
it old school and match expected output after
an exec.
Change-Id: I6c2a66ddf04248f79d17ed7033a3280d50e41562
Reviewed-on: https://go-review.googlesource.com/76150
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, assigning a []T where T is a go:notinheap type generates an
unnecessary write barrier for storing the slice pointer.
This fixes this by teaching HasHeapPointer that this type does not
have a heap pointer, and tweaking the lowering of slice assignments so
the pointer store retains the correct type rather than simply lowering
it to a *uint8 store.
Change-Id: I8bf7c66e64a7fefdd14f2bd0de8a5a3596340bab
Reviewed-on: https://go-review.googlesource.com/76027
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates #22389
@mdempsky's CL 70850 fixed the unnecessary
compile stack trace printing during ICE diagnostics.
This CL adds a test to lock in this behavior.
Change-Id: I9ce49923c80b78cb8c0bb5dc4af3c860a43d63ba
Reviewed-on: https://go-review.googlesource.com/74630
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 65071 enabled inlining for local closures with no captures.
To determine safety of inlining a call sites, we check whether the
variable holding the closure has any assignments after its original
definition.
Unfortunately, that check did not catch OAS2MAPR and OAS2DOTTYPE,
leading to incorrect inlining when a variable holding a closure was
subsequently reassigned through a type conversion or a 2-valued map
access.
There was another more subtle issue wherein reassignment check would
always return a false positive for closure calls inside other
closures. This was caused by the Name.Curfn field of local variables
pointing to the OCLOSURE node instead of the corresponding ODCLFUNC,
which resulted in reassigned walking an empty Nbody and thus never
seeing any reassignments.
This CL fixes these oversights and adds many more tests for closure
inlining which ensure not only that inlining triggers but also the
correctness of the resulting code.
Updates #15561
Change-Id: I74bdae849c4ecfa328546d6d62b512e8d54d04ce
Reviewed-on: https://go-review.googlesource.com/75770
Reviewed-by: Hugues Bruant <hugues.bruant@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of trying to validate map key types eagerly in some
cases, delay their validation to the end of type-checking,
when we all type information is present.
Passes go build -toolexec 'toolstash -cmp' -a std .
Fixes#21273.
Fixes#21657.
Change-Id: I532369dc91c6adca1502d6aa456bb06b57e6c7ff
Reviewed-on: https://go-review.googlesource.com/75310
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Handle make(map[any]any) and make(map[any]any, hint) where
hint <= BUCKETSIZE special to allow for faster map initialization
and to improve binary size by using runtime calls with fewer arguments.
Given hint is smaller or equal to BUCKETSIZE in which case
overLoadFactor(hint, 0) is false and no buckets would be allocated by makemap:
* If hmap needs to be allocated on the stack then only hmap's hash0
field needs to be initialized and no call to makemap is needed.
* If hmap needs to be allocated on the heap then a new special
makehmap function will allocate hmap and intialize hmap's
hash0 field.
Reduces size of the godoc by ~36kb.
AMD64
name old time/op new time/op delta
NewEmptyMap 16.6ns ± 2% 5.5ns ± 2% -66.72% (p=0.000 n=10+10)
NewSmallMap 64.8ns ± 1% 56.5ns ± 1% -12.75% (p=0.000 n=9+10)
Updates #6853
Change-Id: I624e90da6775afaa061178e95db8aca674f44e9b
Reviewed-on: https://go-review.googlesource.com/61190
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The test was skipped because it did not work on AMD64 with
frame pointer enabled, and accidentally skipped on other
architectures. Now frame pointer is the default on AMD64.
Update the test to work with frame pointer. Now the test
is skipped only when frame pointer is NOT enabled on AMD64.
Fixes#18317.
Change-Id: I724cb6874e562f16e67ce5f389a1d032a2003115
Reviewed-on: https://go-review.googlesource.com/68610
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
