Prior to this change, we use typedmemmove to write the key
value to its new location in mapassign_fast32 and mapassign_fast64.
(The use of typedmemmove was a last-minute fix in the 1.9 cycle;
see #21297 and CL 53414.)
This is significantly less inefficient than direct assignment or
calling writebarrierptr directly.
Fortunately, there aren't many cases to consider.
On systems with 32 bit pointers:
* A 32 bit AMEM value either is a single pointer or has no pointers.
* A 64 bit AMEM value may contain a pointer at the beginning,
a pointer at 32 bits, or two pointers.
On systems with 64 bit pointers:
* A 32 bit AMEM value contains no pointers.
* A 64 bit AMEM value either is a single pointer or has no pointers.
All combinations except the 32 bit pointers / 64 bit AMEM value are
cheap and easy to handle, and the problematic case is likely rare.
The most popular map keys appear to be ints and pointers.
So we handle them exhaustively. The sys.PtrSize checks are constant branches
and are eliminated by the compiler.
An alternative fix would be to return a pointer to the key,
and have the calling code do the assignment, at which point the compiler
would have full type information.
Initial tests suggest that the performance difference between these
strategies is negligible, and this fix is considerably simpler,
and has much less impact on binary size.
Fixes#21321
Change-Id: Ib03200e89e2324dd3c76d041131447df66f22bfe
Reviewed-on: https://go-review.googlesource.com/59110
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Implement int reg <-> fp reg moves on amd64.
If we see a load to int reg followed by an int->fp move, then we can just
load to the fp reg instead. Same for stores.
math.Abs is now:
MOVQ "".x+8(SP), AX
SHLQ $1, AX
SHRQ $1, AX
MOVQ AX, "".~r1+16(SP)
math.Copysign is now:
MOVQ "".x+8(SP), AX
SHLQ $1, AX
SHRQ $1, AX
MOVQ "".y+16(SP), CX
SHRQ $63, CX
SHLQ $63, CX
ORQ CX, AX
MOVQ AX, "".~r2+24(SP)
math.Float64bits is now:
MOVSD "".x+8(SP), X0
MOVSD X0, "".~r1+16(SP)
(it would be nicer to use a non-SSE reg for this, nothing is perfect)
And due to the fix for #21440, the inlined version of these improve as well.
name old time/op new time/op delta
Abs 1.38ns ± 5% 0.89ns ±10% -35.54% (p=0.000 n=10+10)
Copysign 1.56ns ± 7% 1.35ns ± 6% -13.77% (p=0.000 n=9+10)
Fixes#13095
Change-Id: Ibd7f2792412a6668608780b0688a77062e1f1499
Reviewed-on: https://go-review.googlesource.com/58732
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
Make it dead simple to see visually what the function outputs in
various scenarios.
Change-Id: I8f6fcd72fa1515361481f0510412cde221e1d4e3
Reviewed-on: https://go-review.googlesource.com/51630
Run-TryBot: Kevin Burke <kev@inburke.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Hiroshi Ioka <hirochachacha@gmail.com>
CL 36428 changed the way nanotime works so on Darwin and Windows it
now depends on runtime.startNano, which is computed at runtime.init
time. Unfortunately, the `runtimeInitTime = nanotime()` initialization
happened *before* runtime.init, so on these platforms runtimeInitTime
is set incorrectly. The one (and only) consequence of this is that the
start time printed in gctrace lines is bogus:
gc 1 18446653480.186s 0%: 0.092+0.47+0.038 ms clock, 0.37+0.15/0.81/1.8+0.15 ms cpu, 4->4->1 MB, 5 MB goal, 8 P
To fix this, this commit moves the runtimeInitTime initialization to
shortly after runtime.init, at which point nanotime is safe to use.
This also requires changing the condition in newproc1 that currently
uses runtimeInitTime != 0 simply to detect whether or not the main M
has started. Since runtimeInitTime could genuinely be 0 now, this
introduces a separate flag to newproc1.
Fixes#21554.
Change-Id: Id874a4b912d3fa3d22f58d01b31ffb3548266d3b
Reviewed-on: https://go-review.googlesource.com/58690
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Generated with
github.com/catapult/tracing/bin/vulcanize_trace_viewer
catapult @ ab4d571fa
Renamed trace_viewer_lean.html to trace_viewer_full.html
to make it clear we are using the full version of trace viewer
(waiting for https://github.com/catapult-project/catapult/issues/2247
to be fixed).
Update #15302
Change-Id: Ice808bb27ab79a1dec9fc863e0c5a761027ebfbe
Reviewed-on: https://go-review.googlesource.com/58750
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Since golang.org/cl/31670, we've stopped using the 'embedded' function
for handling struct embeddings within package export data. Now the
only remaining use is for Go source files, which allows for some
substantial simplifications:
1. CenterDot never appears within Go source files, so that logic can
simply be removed.
2. The field name will always be declared in the local package.
Passes toolstash-check.
Change-Id: I59505f62824206dd5de0782918f98fbef6e93224
Reviewed-on: https://go-review.googlesource.com/58790
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The enumeration of numeric types missed the complex types.
Clarify by removing the explicit enumeration and referring
to numeric types instead.
Fixes#21579.
Change-Id: If36c2421f8501eeec82a07f442ac2e16a35927ba
Reviewed-on: https://go-review.googlesource.com/58491
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Discovered while debugging CL 53644.
No test case because these are purely internal conversions that should
never end up resulting in compiler warnings or even generated code.
Updates #19683.
Change-Id: I0d9333ef2c963fa22eb9b5335bb022bcc9b25708
Reviewed-on: https://go-review.googlesource.com/58190
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The old wording seemed to imply that nil is a kind of type.
Slightly reworded for clarity.
Fixes#21580.
Change-Id: I29898bf0125a10cb8dbb5c7e63ec5399ebc590ca
Reviewed-on: https://go-review.googlesource.com/58490
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Rob Pike <r@golang.org>
When we remove a nil check, add it back to the free Value pool immediately.
Fixes#18732
Change-Id: I8d644faabbfb52157d3f2d071150ff0342ac28dc
Reviewed-on: https://go-review.googlesource.com/58810
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
There are some major problems with TestAdversary (based on "A Killer
Adversary for Quicksort"[1] by M. D. McIlroy). See #21581 for details.
Rewrite the test to closely match the version in the paper so it can
be verified as correct by virtue of similarity.
The only major difference between this new version and the version in
the paper is that this version swaps the values directly instead of
permuting an array of indices because we don't need to recover the
original permutation.
This new version also counts the number of calls to Less() and fails
the test if there are too many.
Fixes#21581.
[1]: http://www.cs.dartmouth.edu/~doug/mdmspe.pdf
Change-Id: Ia94b5b6d288b8fa3805a5fa27661cebbc5bad9a7
Reviewed-on: https://go-review.googlesource.com/58330
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The tests were removed in https://golang.org/cl/2311 but some
references to them were missed.
Change-Id: I163e554a0cc99401a012deead8fda813ad74dbfe
Reviewed-on: https://go-review.googlesource.com/58870
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 54410 and CL 56250 recently added use of the MOVOstore
instruction to improve performance.
However, we can't use the MOVOstore instruction on Plan 9,
because floating point operations are not allowed in the
note handler.
This change adds a configuration flag useSSE to enable the
use of SSE instructions for non-floating point operations.
This flag is enabled by default and disabled on Plan 9.
When this flag is disabled, the MOVOstore instruction is
not used and the MOVQstoreconst instruction is used instead.
Fixes#21599
Change-Id: Ie609e5d9b82ec0092ae874bab4ce01caa5bc8fb8
Reviewed-on: https://go-review.googlesource.com/58850
Reviewed-by: Keith Randall <khr@golang.org>
This change also added the same check in make.bash to make.rc,
which makes sure $GOROOT_BOOTSTRAP != $GOROOT.
Fixes#14339
Change-Id: I2758f4a845bae42ace02492fc6a911f6d6247d26
Reviewed-on: https://go-review.googlesource.com/57753
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
WriteHeader may fail to encode a header for any number of reasons,
which can be frustrating for the user when trying to create a tar archive.
As we validate the Header, we generate an informative error message
intended for human consumption and return that if and only if no
format can be selected.
This allows WriteHeader to return informative errors like:
tar: cannot encode header: invalid PAX record: "linkpath = \x00hello"
tar: cannot encode header: invalid PAX record: "SCHILY.xattr.foo=bar = baz"
tar: cannot encode header: Format specifies GNU; and only PAX supports Xattrs
tar: cannot encode header: Format specifies GNU; and GNU cannot encode ModTime=1969-12-31 15:59:59.0000005 -0800 PST
tar: cannot encode header: Format specifies GNU; and GNU supports sparse files only with TypeGNUSparse
tar: cannot encode header: Format specifies USTAR; and USTAR cannot encode ModTime=292277026596-12-04 07:30:07 -0800 PST
tar: cannot encode header: Format specifies USTAR; and USTAR does not support sparse files
tar: cannot encode header: Format specifies PAX; and only GNU supports TypeGNUSparse
Updates #18710
Change-Id: I82a498d6f29d02c4e73bce47b768eb578da8499c
Reviewed-on: https://go-review.googlesource.com/58310
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For code like the following (where x escapes):
x := []int{1}
We're currently generating a nil check. The line above is really 3 operations:
t := new([1]int)
t[0] = 1
x := t[:]
We remove the nil check for t[0] = 1, but not for t[:].
Our current nil check removal rule is too strict about the possible
memory arguments of the nil check. Unlike zeroing or storing to the
result of runtime.newobject, the nilness of runtime.newobject is
always false, even after other stores have happened in the meantime.
Change-Id: I95fad4e3a59c27effdb37c43ea215e18f30b1e5f
Reviewed-on: https://go-review.googlesource.com/58711
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
In writelines the linker uses various auxiliary information about a
function to create its line table entries. (It also does some unrelated
stuff, but never mind.) There's no reason to do this for non-Go
functions, so it bails out if the symbol has no FuncInfo.
However, it does so *after* it looks up (and implicitly creates!) the
go.info symbol for the function, which doesn't make sense and risks
creating duplicate symbols for static C functions. Move the check up so
that it doesn't do that.
Since non-Go functions can't reference Go types, there shouldn't be any
relocations to type info DIEs that need to be built, so there should be
no harm not doing that.
I wanted to change the Lookup to an ROLookup but that broke the
shared-mode tests with an inscrutable error.
No test. It seems too specific to worry about, but if someone disagrees
I can figure something out.
Fixes#21566
Change-Id: I61f03b7c504a3bf1c4245a8811795b6303469e91
Reviewed-on: https://go-review.googlesource.com/58630
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Pre-emptive. Go 1.9 is expected to be released in August.
Change-Id: I0f58c012c4110bf490022dc2c1d69c0988d73bfa
Reviewed-on: https://go-review.googlesource.com/52351
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This eliminates a nil check of b while evaluating b.tophash,
which is in the inner loop of many hot map functions.
It also makes the code a bit clearer.
Also remove some gotos in favor of labeled breaks.
On non-x86 architectures, this change introduces a pointless reg-reg move,
although the cause is well-understood (#21572).
Change-Id: Ib7ee58b59ea5463b92e1590c8b8f5c0ef87d410a
Reviewed-on: https://go-review.googlesource.com/58372
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Otherwise the default computation in symalign kicked in, setting the
alignment to be too high. This didn't matter with GNU ld, which put
each loadable note into a separate PT_NOTE segment, but it did matter
with gold which accumulated them all into a single PT_NOTE segment,
respecting the requested alignment. In the single PT_NOTE segment
generated by gold, the incorrect section alignment made the notes
unreadable.
Fixes#21564
Change-Id: I15eb408bb04a2566c9fdfb6828e14188d9ef2280
Reviewed-on: https://go-review.googlesource.com/58290
Reviewed-by: Russ Cox <rsc@golang.org>
This is a crude compiler pass to eliminate stores to auto variables
that are only ever written to.
Eliminates an unnecessary store to x from the following code:
func f() int {
var x := 1
return *(&x)
}
Fixes#19765.
Change-Id: If2c63a8ae67b8c590b6e0cc98a9610939a3eeffa
Reviewed-on: https://go-review.googlesource.com/38746
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This prevents unnecessary reg-reg moves during pointer arithmetic.
This change reduces the size of the full hello world binary by 0.4%.
Updates #21572
Change-Id: Ia0427021e5c94545a0dbd83a6801815806e5b12d
Reviewed-on: https://go-review.googlesource.com/58371
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
On 386 the below code triggered an infinite loop in growslice:
x = make([]byte, 1<<30-1, 1<<30-1)
x = append(x, x...)
Check for overflow when calculating the new slice capacity
and set the new capacity to the requested capacity when an overflow
is detected to avoid an infinite loop.
No automatic test added due to requiring to allocate 1GB of memory
on a 32bit plaform before use of append is able to trigger the
overflow check.
Fixes#21441
Change-Id: Ia871cc9f88479dacf2c7044531b233f83d2fcedf
Reviewed-on: https://go-review.googlesource.com/57950
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently all package tests are executed once
with Parallel tests executed in parallel.
Then this process is repeated count*cpu times.
Tests are not parallelized over count*cpu.
Parallelizing over cpu is not possible as
GOMAXPROCS is a global setting. But it is
possible for count.
Parallelize over count.
Brings down testing of my package with -count=100
form 10s to 0.3s.
Change-Id: I76d8322adeb8c5c6e70b99af690291fd69d6402a
Reviewed-on: https://go-review.googlesource.com/44830
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This slightly improves the generated code on x86 architectures,
including on many hot paths.
It is a no-op on other architectures.
Change-Id: I86336fd846bc5805a27bbec572e8c73dcbd0d567
Reviewed-on: https://go-review.googlesource.com/57411
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is necessary when you aren't actively changing the runtime. Oops.
Also, run the tests on the builders, to avoid silent failures (#17472).
Change-Id: I1fc03790cdbddddb07026a772137a79919dcaac7
Reviewed-on: https://go-review.googlesource.com/58050
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The Reader and Writer are now at feature parity,
meaning that everything that can be parsed by the Reader,
can also be composed by the Writer.
This position enables us to support selection of the format
in a backwards compatible way, since it ensures that everything
that can be read can also be round-trip written.
As such, we add the following new API:
type Format int
const FormatUnknown Format = 0 ...
type Header struct { ...; Format Format }
The new Header.Format field is populated by the Reader on the
best guess on what the format is. Note that the Reader is very liberal
in what it permits, so a hybrid TAR file using aspects of multiple
formats can still be decoded, but will be reported as FormatUnknown.
Even though Reader has full support for V7 and basic support for STAR,
it will still report those formats as unknown (and the constants for
those formats are not even exported). The reasons for this is because
the Writer has no support for V7 or STAR. Leaving it as unknown allows
the Writer to choose a format usually USTAR or GNU that can encode
the equivalent Header.
When writing, the Header.allowedFormats will take the Format field
into consideration if it is a known format.
Fixes#18710
Change-Id: I00980c475d067c6969d3414e1ff0224fdd89cd49
Reviewed-on: https://go-review.googlesource.com/58230
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The method Method expects index to be an index of exported fields,
but, before this change, the index used by MethodByName could
take into account unexported fields if those happened sort
before the exported one.
Fixes#21177
Change-Id: I90bb64a47b23e2e43fdd2b8a1e0a2c9a8a63ded2
Reviewed-on: https://go-review.googlesource.com/51810
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL is the second step (of two; part1 is CL/56771) for adding
sparse file support to the Writer.
There are no new identifiers exported in this CL, but this does make
use of Header.SparseHoles added in part1. If the Typeflag is set to
TypeGNUSparse or len(SparseHoles) > 0, then the Writer will emit an
sparse file, where the holes must be written by the user as zeros.
If TypeGNUSparse is set, then the output file must use the GNU format.
Otherwise, it must use the PAX format (with GNU-defined PAX keys).
A future CL may export Reader.Discard and Writer.FillZeros,
but those methods are currently unexported, and only used by the
tests for efficiency reasons.
Calling Discard or FillZeros on a hole 10GiB in size does take
time, even if it is essentially a memcopy.
Updates #13548
Change-Id: Id586d9178c227c0577f796f731ae2cbb72355601
Reviewed-on: https://go-review.googlesource.com/57212
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run "cmd/go terminal test" after standard library tests.
Run "testing race detector" before cgo tests, not in the middle of them.
Fixes#21524
Change-Id: I32964ec6377dd070242138ec452bd8ab1821dcc5
Reviewed-on: https://go-review.googlesource.com/57230
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Joe Tsai <joetsai@google.com>
For those tests there won't be enough permissions in containers.
I decided to go this way instead of just skipping os.IsPermission errors because
many of those tests were specifically written to check false positive permission
errors.
Fixes#21379
Change-Id: Ie25e1d6d47f85bb6b570352638440f3ac1e18e03
Reviewed-on: https://go-review.googlesource.com/58170
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The current code treats floating-point constant as integer
and does not treat fcmp/fcmpe as the comparison instrucitons
that requires special handling.
The fix corrects the type of immediate arguments and adds fcmp/fcmpe
in the special handing.
Uncomment the fcmp/fcmpe cases.
Fixes#21567
Change-Id: I6782520e2770f6ce70270b667dd5e68f71e2d5ad
Reviewed-on: https://go-review.googlesource.com/57852
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This will prevent any ptrace calls from getting trace output from the runtime
itself setting up after fork.
Fixes#21428.
Change-Id: I9d835bd5a8f404394eb6237679f2111a72e5bc17
Reviewed-on: https://go-review.googlesource.com/55811
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Avelino <t@avelino.xxx>
When deleting entries from a map, only clear the key and value
if they contain pointers. And use memclrHasPointers to do so.
While we're here, specialize key clearing in mapdelete_faststr,
and fix another missed usage of add in mapdelete.
Benchmarking impeded by #21546.
Change-Id: I3f6f924f738d6b899b722d6438e9e63f52359b84
Reviewed-on: https://go-review.googlesource.com/57630
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Move the tophash checks after the equality/length checks.
For fast32/fast64, since we've done a full equality check already,
just check whether tophash is empty instead of checking tophash.
This is cheaper and allows us to skip calculating tophash.
These changes are modeled on the changes in CL 57590,
which were polished based on benchmarking.
Benchmarking directly is impeded by #21546.
Change-Id: I0e17163028e34720310d1bf8f95c5ef42d223e00
Reviewed-on: https://go-review.googlesource.com/57611
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This better matches the style of the rest of the runtime.
Change-Id: I6abb755df50eb3d9086678629c0d184177e1981f
Reviewed-on: https://go-review.googlesource.com/57610
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
During rebase of golang.org/cl/55152 the bucket argument
which was removed in golang.org/cl/56290 from makemap
was not removed from the argument list of makemap64.
This did lead to "pointer in unallocated span" errors
on 32bit platforms since the compiler did only generate
calls to makemap64 without the bucket argument.
Fixes#21568
Change-Id: Ia964a3c285837cd901297f4e16e40402148f8c1c
Reviewed-on: https://go-review.googlesource.com/57990
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The intent is to allow more aggressive refactoring
in the runtime without silent performance changes.
The test would be useful for many functions.
I've seeded it with the runtime functions tophash and add;
it will grow organically (or wither!) from here.
Updates #21536 and #17566
Change-Id: Ib26d9cfd395e7a8844150224da0856add7bedc42
Reviewed-on: https://go-review.googlesource.com/57410
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
