Appease the vet builder until we figure out the ideal solution.
Updates #21716.
Change-Id: I64ecdf9b6efb0933c5c79e11c860966ff1980305
Reviewed-on: https://go-review.googlesource.com/60776
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Simplify the DWARF representation of structs by emitting field offsets
as constants rather than location descriptions.
This was not explicitly mentioned as an option in DWARF2. It is
mentioned in DWARF4, but isn't listed in the changes, so it's not clear
if this was always intended to work or is an undocumented change. Either
way, it should be valid DWARF4.
Change-Id: Idf7fdd397a21c8f8745673ecc77ef65afa3ffe1c
Reviewed-on: https://go-review.googlesource.com/51611
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When we added a Stat call to determine the initial buffer size in
https://golang.org/cl/163069, we included an arbitrary 1e9-byte limit
"just in case". That interacts badly with power-of-2 resizing in
*bytes.Buffer: it causes buffers reading from very large files to
consume up to twice the necessary space.
The documentation for (os.FileInfo).Size says that it reports "length
in bytes for regular files; system-dependent for others", but the
"system dependent" cases overwhelmingly return either a small number
(e.g., the length of the target path for a symlink) or a non-positive
number (e.g., for a file in /proc under Linux). It should be
appropriate to use the number reported by Size as an approximate lower
bound, even if it is large.
fixes#21455
Change-Id: I609c72519b7b87428c24d0b22db46eede30e0e54
Reviewed-on: https://go-review.googlesource.com/55870
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Since these are type aliases in Go 1.9 make rewriting
golang.org/x/net/context imports to context the default.
Change-Id: Ib7ee58b59ea5463b92e1590c8b8f5c0ef87d310b
Reviewed-on: https://go-review.googlesource.com/58590
Reviewed-by: Sameer Ajmani <sameer@golang.org>
Run-TryBot: Sam Whited <sam@samwhited.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#20933
Change-Id: I827c8d265674a7448c51c1da991e9b3b4501ba11
Reviewed-on: https://go-review.googlesource.com/59850
Run-TryBot: Tom Bergan <tombergan@google.com>
Reviewed-by: Tom Bergan <tombergan@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes sure that the go/types package still builds even if
the hilbert test generated its test file in the go/types package
(when run as: go test -run Hilbert -out=h.go).
Change-Id: I60ecbaaa1537de14cfa95e2e6fc8ebedff651baf
Reviewed-on: https://go-review.googlesource.com/60531
Reviewed-by: Marcel van Lohuizen <mpvl@golang.org>
Some constants were added to flate that seem to be an experimental
attempt at increasing the window size. However, according to RFC1951,
the largest window size is 32KiB, so these constants are non-standard.
Delete them.
Fixes#18458
Change-Id: Ia94989637ca031a56bce2548624fa48044caa7b9
Reviewed-on: https://go-review.googlesource.com/60490
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change added support "end of central directory record comemnt" to the Writer.
There is a new exported field Writer.Comment in this change.
If invalid size of comment was set, Close returns error without closing resources.
Fixes#21634
Change-Id: Ifb62bc6c7f81b9257ac83eb570ad9915de727f8c
Reviewed-on: https://go-review.googlesource.com/59310
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Normal shift rules plus constant folding are enough to generate
efficient shift-by-constant instructions.
Add test to make sure we don't generate comparisons for constant
shifts.
TODO: there are still constant shift rules on PPC64. If they
are removed, the constant folding rules are not enough to remove
all the test and mask stuff for constant shifts. Leave them in
for now.
Fixes#20663.
Change-Id: I724cc324aa8607762d0c8aacf9bfa641bda5c2a1
Reviewed-on: https://go-review.googlesource.com/60330
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Matches other architectures by using names for syscalls instead of
numbers directly.
Fixes#20499.
Change-Id: I63d606b0b1fe6fb517fd994a7542a3f38d80dd54
Reviewed-on: https://go-review.googlesource.com/44213
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Between go1.7 and go1.8, a performance regression was introduced in some of the
BenchmarkCompareBytes benchmarks.
Go1.7 vs Go1.8:
BenchmarkCompareBytesToNil-8 7.44 8.44 +13.44%
BenchmarkCompareBytesIdentical-8 6.96 11.5 +65.23%
BenchmarkCompareBytesBigIdentical-8 6.65 47112 +708351.13%
This change fixes the problem by optimizing the case where the byte slices being
compared are equal:
Go1.9 vs current:
BenchmarkCompareBytesToNil-8 7.35 7.00 -4.76%
BenchmarkCompareBytesIdentical-8 11.4 6.81 -40.26%
BenchmarkCompareBytesBigIdentical-8 48396 9.26 -99.98%
runtime.cmpstring can benefit from the same approach and is also changed.
Change-Id: I3cb25f59d8b940a83a2cf687eea764cfeff90688
Reviewed-on: https://go-review.googlesource.com/59650
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Currently, cgo supports only macros which can be reduced to constants
or variables. The CL addresses remaining parts, macros which can be
represented as niladic functions.
The basic idea is simple:
1. make a thin wrapper function per macros.
2. replace macro expansions with function calls.
Fixes#10715Fixes#18720
Change-Id: I150b4fb48e9dc4cc34466ef6417c04ac93d4bc1a
Reviewed-on: https://go-review.googlesource.com/43970
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use "file" consistently instead of "entry".
Change-Id: Ia81c9665d0d956adb78f7fa49de40cdb87fba000
Reviewed-on: https://go-review.googlesource.com/60150
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Nearly every Header obtained from FileInfoHeader via the FS has
timestamps with sub-second resolution and the AccessTime
and ChangeTime fields populated. This forces the PAX format
to almost always be used, which has the following problems:
* PAX is still not as widely supported compared to USTAR
* The PAX headers will occupy at minimum 1KiB for every entry
The old behavior of tar Writer had no support for sub-second resolution
nor any support for AccessTime or ChangeTime, so had neither problem.
Instead the Writer would just truncate sub-second information and
ignore the AccessTime and ChangeTime fields.
In this CL, we preserve the behavior such that the *default* behavior
would output a USTAR header for most cases by truncating sub-second
time measurements and ignoring AccessTime and ChangeTime.
To use either of the features, users will need to explicitly specify
that the format is PAX or GNU.
The exact policy chosen is this:
* USTAR and GNU may still be chosen even if sub-second measurements
are present; they simply truncate the timestamp to the nearest second.
As before, PAX uses sub-second resolutions.
* If the Format is unspecified, then WriteHeader ignores AccessTime
and ChangeTime when using the USTAR format.
This ensures that USTAR may still be chosen for a vast majority of
file entries obtained through FileInfoHeader.
Updates #11171
Updates #17876
Change-Id: Icc5274d4245922924498fd79b8d3ae94d5717271
Reviewed-on: https://go-review.googlesource.com/59230
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change implements the convention for generated code header agreed upon in https://golang.org/s/generatedcode.
Additionally run go generate.
Also update some comments.
Updates #13560
Change-Id: If45f91b93aaa0d43280c2c4630823bc4d2dc7d3a
Reviewed-on: https://go-review.googlesource.com/60250
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, the suggested code would result in the following golint warning:
“should drop = 0 from declaration of var errorsOnlyKey; it is the zero value”
Change-Id: I1a302c1e40ca89acbc76897e39097ecd04865460
Reviewed-on: https://go-review.googlesource.com/60290
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some instructions operating on <= 32 bits also zero out upper 32bits.
Remove zeroextensions of such values. Triggers a few times during
all.bash. Also removes ugly code like:
MOVL CX,CX
Change-Id: I66a46c190dd6929b7e3c52f3fe6b967768d00638
Reviewed-on: https://go-review.googlesource.com/58090
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The last sentence in the section on slice expressions could be read
as if it might apply to strings. Changed the sentence a bit to
emphasize its applicability to slices only. See also the issue for
more background.
Fixes#19220.
Change-Id: I8551f34230e4ed93f951e7b871cc81f54a5874a9
Reviewed-on: https://go-review.googlesource.com/59890
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the name of the function to construct the map bucket type
consistent with runtimes naming and the existing hmap function.
Change-Id: If4d8b4a54c92ab914d4adcb96022b48d8b5db631
Reviewed-on: https://go-review.googlesource.com/59915
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Padding needed for map buckets is dependent on the types used to
construct the map bucket. In case of indirect keys or values pointers
are used in the map bucket to the keys or values.
Change the map bucket padding calculation to take the alignment of
the key and value types used to construct the map bucket into account
instead of the original key and value type.
Since pointers are always 32bit aligned on amd64p32 this prevents
adding unneeded padding in case the key or value would have needed
64bit alignment without indirect referencing.
Change-Id: I7943448e882d269b5cff7e921a2a6f3430c50878
Reviewed-on: https://go-review.googlesource.com/60030
Reviewed-by: Keith Randall <khr@golang.org>
Check map invariants, type size and alignments during compile time.
Keep runtime checks for reflect by adding them to reflect_makemap.
Change-Id: Ia28610626591bf7fafb7d5a1ca318da272e54879
Reviewed-on: https://go-review.googlesource.com/59914
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
* rename to emitPcln because I'd like to skip not only container types,
but also something like "go.buildid" in the future.
* return bool instead of int.
Change-Id: I029adb81292f7dd2fe98e69f3877c5c27f32ec30
Reviewed-on: https://go-review.googlesource.com/59415
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
We take a best-effort approach since information for these fields
are not well supported on all platforms.
user.LookupId+user.LookupGroupId is currently 15x slower than os.Stat.
For performance reasons, we perpetually cache username and groupname
with a sync.Map. As a result, this function will not be updated whenever
the user or group names are renamed in the OS. However, this is a better
situation than before, where those fields were not populated at all.
Change-Id: I3cec8291aed7675dea89ee1cbda92bd493c8831f
Reviewed-on: https://go-review.googlesource.com/59531
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This commit relaxes SendmsgN behavior of introducing a dummy 1-byte
payload when sending ancillary-only messages.
The fake payload is not needed for SOCK_DGRAM type sockets, and actually
breaks interoperability with other fd-passing software (journald is one
known example). This introduces an additional check to avoid injecting
dummy payload in such case.
Full reference at https:/golang.org/issue/6476#issue-51285243
Fixes#6476
Change-Id: I19a974b4e7920e002bd0556259ab766572358520
Reviewed-on: https://go-review.googlesource.com/45872
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: I8a54235c8b7bf1010f19d0d358cd4f76fc911d28
Reviewed-on: https://go-review.googlesource.com/59416
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: Ifc66bd8c32e788f35da3bd105bcdcfd04bd3dabc
Reviewed-on: https://go-review.googlesource.com/59414
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
* extract pkgname() and findlib() from the function for #18190.
* rename const pkgname to const pkgdef to avoid confliction.
Change-Id: Ie62509bfbddcf19cf92b5b12b598679a069e6e74
Reviewed-on: https://go-review.googlesource.com/59417
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Right now we only kind of sort of trace GC STW events. We emit events
around mark termination, but those start well after stopping the world
and end before starting it again, and we don't emit any events for
sweep termination.
Fix this by generalizing EvGCScanStart/EvGCScanDone. These were
already re-purposed to indicate mark termination (despite the names).
This commit renames them to EvGCSTWStart/EvGCSTWDone, adds an argument
to indicate the STW reason, and shuffles the runtime to generate them
right before stopping the world and right after starting the world,
respectively.
These events will make it possible to generate precise minimum mutator
utilization (MMU) graphs and could be useful in detecting
non-preemptible goroutines (e.g., #20792).
Change-Id: If95783f370781d8ef66addd94886028103a7c26f
Reviewed-on: https://go-review.googlesource.com/55411
Reviewed-by: Rick Hudson <rlh@golang.org>
Also add more test cases.
Change-Id: I53cc6484b25560fc7a4b5d44e73bbd9270c25769
Reviewed-on: https://go-review.googlesource.com/59950
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Found with mvdan.cc/unindent. It skipped the cases where parentheses
would need to be added, where comments would have to be moved elsewhere,
or where actions and simple logic would mix.
One of them was of the form "err != nil && err == io.EOF", so the first
part was removed.
Change-Id: Ie504c2b03a2c87d10ecbca1b9270069be1171b91
Reviewed-on: https://go-review.googlesource.com/57690
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some custom usage functions call it for clarity; others rely on the default
behavior, which makes an explicit call redundant. Document that it's
safe to be explicit.
Fixes#21671.
Change-Id: I08e9f47265582821cfd35995dff0c589cd85809d
Reviewed-on: https://go-review.googlesource.com/59792
Reviewed-by: Dominik Honnef <dominik@honnef.co>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are several distros now that no longer have /bin.
Instead of assuming /bin/pwd, we will look for it in $PATH.
Fixes#21684.
Change-Id: I61478326500edeadc3c26803990550dad00c7971
Signed-off-by: Ron Minnich <rminnich@gmail.com>
Reviewed-on: https://go-review.googlesource.com/60010
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 57291 broke on solaris because it depends on signal forwarding
working for signals raised by dieFromSignal.
Call sigtrampgo instead of sighandler directly, like the other
unix platforms.
Fixes the solaris builders.
Change-Id: I6bf314c436d1edeaecc4b03f15a9155270919524
Reviewed-on: https://go-review.googlesource.com/59811
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Saying that they return t unchanged is misleading, because they return
a modified t, stripped of any monotonic clock reading, as of Go 1.9.
Fixes#21485.
Change-Id: Icddf8813aed3d687fcefcd2fe542829438be6a0a
Reviewed-on: https://go-review.googlesource.com/56690
Reviewed-by: Avelino <t@avelino.xxx>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This commit adds an example to the runtime/trace package
on how to use the trace.Start and trace.Stop functions
to trace the execution of a Go program and write
its trace output to a file.
Change-Id: Idf920398f1c3b9d185af9df5ce9293f2361db022
Reviewed-on: https://go-review.googlesource.com/51170
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
