This tracks scan work done by background GC in a global pool. Mutator
assists will draw on this credit to avoid doing work when background
GC is staying ahead.
Unlike the other GC controller tracking variables, this will be both
written and read throughout the cycle. Hence, we can't arbitrarily
delay updates like we can for scan work and bytes marked. However, we
still want to minimize contention, so this global credit pool is
allowed some error from the "true" amount of credit. Background GC
accumulates credit locally up to a limit and only then flushes to the
global pool. Similarly, mutator assists will draw from the credit pool
in batches.
Change-Id: I1aa4fc604b63bf53d1ee2a967694dffdfc3e255e
Reviewed-on: https://go-review.googlesource.com/8834
Reviewed-by: Rick Hudson <rlh@golang.org>
This implements tracking the scan work ratio of a GC cycle and using
this to estimate the scan work that will be required by the next GC
cycle. Currently this estimate is unused; it will be used to drive
mutator assists.
Change-Id: I8685b59d89cf1d83eddfc9b30d84da4e3a7f4b72
Reviewed-on: https://go-review.googlesource.com/8833
Reviewed-by: Rick Hudson <rlh@golang.org>
This tracks the amount of scan work in terms of scanned pointers
during the concurrent mark phase. We'll use this information to
estimate scan work for the next cycle.
Currently this aggregates the work counter in gcWork and dispose
atomically aggregates this into a global work counter. dispose happens
relatively infrequently, so the contention on the global counter
should be low. If this turns out to be an issue, we can reduce the
number of disposes, and if it's still a problem, we can switch to
per-P counters.
Change-Id: Iac0364c466ee35fab781dbbbe7970a5f3c4e1fc1
Reviewed-on: https://go-review.googlesource.com/8832
Reviewed-by: Rick Hudson <rlh@golang.org>
These currently use portable implementations in terms of their uint64
counterparts.
Change-Id: Icba5f7134cfcf9d0429edabcdd73091d97e5e905
Reviewed-on: https://go-review.googlesource.com/8831
Reviewed-by: Rick Hudson <rlh@golang.org>
This change exposes reflect.ArrayOf to create new reflect.Type array
types at runtime, when given a reflect.Type element.
- reflect: implement ArrayOf
- reflect: tests for ArrayOf
- runtime: document that typeAlg is used by reflect and must be kept in
synchronized
Fixes#5996.
Change-Id: I5d07213364ca915c25612deea390507c19461758
Reviewed-on: https://go-review.googlesource.com/4111
Reviewed-by: Keith Randall <khr@golang.org>
This change fixes inconsistent error values on
Lookup{Addr,CNAME,Host,IP.MX,NS,Port,SRV,TXT}.
Updates #4856.
Change-Id: I059bc8ffb96ee74dff8a8c4e8e6ae3e4a462a7ef
Reviewed-on: https://go-review.googlesource.com/9108
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change fixes inconsistent error values on Interfaces,
InterfaceAddrs, InterfaceBy{Index,Name}, and Addrs and MulticastAddrs
methods of Interface.
Updates #4856.
Change-Id: I09e65522a22f45c641792d774ebf7a0081b874ad
Reviewed-on: https://go-review.googlesource.com/9140
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change fixes inconsistent error values on
Set{Deadline,ReadDeadline,WriteDeadline,ReadBuffer,WriteBuffer} for
Conn, Listener and PacketConn, and
Set{KeepAlive,KeepAlivePeriod,Linger,NoDelay} for TCPConn.
Updates #4856.
Change-Id: I34ca5e98f6de72863f85b2527478b20d8d5394dd
Reviewed-on: https://go-review.googlesource.com/9109
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change fixes inconsistent error values on
File{Conn,Listener,PacketConn} and File method of Conn, Listener.
Updates #4856.
Change-Id: I3197b9277bef0e034427e3a44fa77523acaa2520
Reviewed-on: https://go-review.googlesource.com/9101
Reviewed-by: Ian Lance Taylor <iant@golang.org>
They don't really make any sense on this side of the compiler/linker divide.
Some of the code touching these fields was the support for R_TLS when
thechar=='6' which turns out to be dead and so I just removed all of that.
Change-Id: I4e265613c4e7fcc30a965fffb7fd5f45017f06f3
Reviewed-on: https://go-review.googlesource.com/9107
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also moves a few server test helpers into mockserver_test.go.
Change-Id: I5a95c9bc6f0c4683751bcca77e26a8586a377466
Reviewed-on: https://go-review.googlesource.com/9106
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I1ea4175466c9113c1f41b012ba8266ee2b06e3a3
Reviewed-on: https://go-review.googlesource.com/8522
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Thanks to Russ for the hints.
Change-Id: Ie35a71d432b9d68bd30c7a364b4dce1bd3db806e
Reviewed-on: https://go-review.googlesource.com/9102
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Optimized heapBitsForObject by special casing
objects whose size is a power of two. When a
span holding such objects is initialized I
added a mask that when &ed with an interior pointer
results in the base of the pointer. For the garbage
benchmark this resulted in CPU_CLK_UNHALTED in
heapBitsForObject going from 7.7% down to 5.9%
of the total, INST_RETIRED went from 12.2 -> 8.7.
Here are the benchmarks that were at lease plus or minus 1%.
benchmark old ns/op new ns/op delta
BenchmarkFmtFprintfString 249 221 -11.24%
BenchmarkFmtFprintfInt 247 223 -9.72%
BenchmarkFmtFprintfEmpty 76.5 69.6 -9.02%
BenchmarkBinaryTree17 4106631412 3744550160 -8.82%
BenchmarkFmtFprintfFloat 424 399 -5.90%
BenchmarkGoParse 4484421 4242115 -5.40%
BenchmarkGobEncode 8803668 8449107 -4.03%
BenchmarkFmtManyArgs 1494 1436 -3.88%
BenchmarkGobDecode 10431051 10032606 -3.82%
BenchmarkFannkuch11 2591306713 2517400464 -2.85%
BenchmarkTimeParse 361 371 +2.77%
BenchmarkJSONDecode 70620492 68830357 -2.53%
BenchmarkRegexpMatchMedium_1K 54693 53343 -2.47%
BenchmarkTemplate 90008879 91929940 +2.13%
BenchmarkTimeFormat 380 387 +1.84%
BenchmarkRegexpMatchEasy1_32 111 113 +1.80%
BenchmarkJSONEncode 21359159 21007583 -1.65%
BenchmarkRegexpMatchEasy1_1K 603 613 +1.66%
BenchmarkRegexpMatchEasy0_32 127 129 +1.57%
BenchmarkFmtFprintfIntInt 399 393 -1.50%
BenchmarkRegexpMatchEasy0_1K 373 378 +1.34%
Change-Id: I78e297161026f8b5cc7507c965fd3e486f81ed29
Reviewed-on: https://go-review.googlesource.com/8980
Reviewed-by: Austin Clements <austin@google.com>
http://golang.org/cl/7623 refactored how line history works and
introduced a new TrimPathPrefix field to replace the existing Trimpath
field, but never removed the latter or updated its users.
Fixes#10503.
Change-Id: Ief90a55b6cef2e8062b59856a4c7dcc0df01d3f2
Reviewed-on: https://go-review.googlesource.com/9113
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
This is primarily about making the code clearer, but as part of the cleanup
componentgen is now much more consistent about what it does and does
not attempt.
The new limit is to 8 move instructions.
The old limit was either 3 or 4 small things but in the details it was
quite inconsistent: ints, interfaces, strings, and slices all counted as small;
it handled a struct containing two ints, but not a struct containing a struct
containing two ints; it handled slices and interfaces and a struct containing
a slice but not a struct containing an interface; and so on.
The new code runs at about the same speed as the old code if limited to 4 moves,
but that's much more restrictive when the pieces are strings or interfaces.
With the limit raised to 8 moves, this CL is sometimes a significant improvement:
benchmark old ns/op new ns/op delta
BenchmarkBinaryTree17 4361174290 4362870005 +0.04%
BenchmarkFannkuch11 3008201483 2974408533 -1.12%
BenchmarkFmtFprintfEmpty 79.0 79.5 +0.63%
BenchmarkFmtFprintfString 281 261 -7.12%
BenchmarkFmtFprintfInt 264 262 -0.76%
BenchmarkFmtFprintfIntInt 447 443 -0.89%
BenchmarkFmtFprintfPrefixedInt 354 361 +1.98%
BenchmarkFmtFprintfFloat 500 452 -9.60%
BenchmarkFmtManyArgs 1688 1693 +0.30%
BenchmarkGobDecode 11718456 11741179 +0.19%
BenchmarkGobEncode 10144620 10161627 +0.17%
BenchmarkGzip 437631642 435271877 -0.54%
BenchmarkGunzip 109468858 110173606 +0.64%
BenchmarkHTTPClientServer 76248 75362 -1.16%
BenchmarkJSONEncode 24160474 23753091 -1.69%
BenchmarkJSONDecode 84470041 82902026 -1.86%
BenchmarkMandelbrot200 4676857 4687040 +0.22%
BenchmarkGoParse 4954602 4923965 -0.62%
BenchmarkRegexpMatchEasy0_32 151 151 +0.00%
BenchmarkRegexpMatchEasy0_1K 450 452 +0.44%
BenchmarkRegexpMatchEasy1_32 131 130 -0.76%
BenchmarkRegexpMatchEasy1_1K 713 695 -2.52%
BenchmarkRegexpMatchMedium_32 227 218 -3.96%
BenchmarkRegexpMatchMedium_1K 63911 62966 -1.48%
BenchmarkRegexpMatchHard_32 3163 3026 -4.33%
BenchmarkRegexpMatchHard_1K 93985 90266 -3.96%
BenchmarkRevcomp 650697093 649211600 -0.23%
BenchmarkTemplate 107049170 106804076 -0.23%
BenchmarkTimeParse 448 452 +0.89%
BenchmarkTimeFormat 468 460 -1.71%
Change-Id: I08563133883e88bb9db9e9e4dee438a5af2787da
Reviewed-on: https://go-review.googlesource.com/9004
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL revises CL 7504 to use explicitly uintptr types for the
struct fields that are going to be updated sometimes without
write barriers. The result is that the fields are now updated *always*
without write barriers.
This approach has two important properties:
1) Now the GC never looks at the field, so if the missing reference
could cause a problem, it will do so all the time, not just when the
write barrier is missed at just the right moment.
2) Now a write barrier never happens for the field, avoiding the
(correct) detection of inconsistent write barriers when GODEBUG=wbshadow=1.
Change-Id: Iebd3962c727c0046495cc08914a8dc0808460e0e
Reviewed-on: https://go-review.googlesource.com/9019
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The majority of this CL was prepared via scripted invocations of
`gofmt -w -r "$SYM -> obj.$SYM" cmd/internal/ld/*.go` and `gofmt -w -r
"ld.$SYM -> obj.$SYM" cmd/?l/*.go`.
Because of issue #7417, that was followed by repeatedly running an AWK
script to identify lines that differed other than whitespace changes
or "ld." or "obj." prefixes and manually restoring comments.
Finally, the redundant constants from cmd/internal/ld/link.go were
removed, and "goimports -w" was used to cleanup import lines.
Passes rsc.io/toolstash/buildall, even when modified to also build cmd.
Fixes#10055.
Change-Id: Icd5dbe819a3b6520ce883748e60017dc8e9a2e85
Reviewed-on: https://go-review.googlesource.com/9112
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The go command prints paths in errors relative to its current directory.
Since all.bash and run.bash are run in $GOROOT/src, prefer to run
the go command, so that the relative paths are correct.
Before this CL, running all.bash in $GOROOT/src:
##### Testing race detector
# net/http
src/net/http/transport.go:1257: cannot take the address of <node EFACE>
This is wrong (or at least less useful) because there is no $GOROOT/src/src/net/http directory.
Change-Id: I0c0d52c22830d79b3715f51a6329a3d33de52a72
Reviewed-on: https://go-review.googlesource.com/9157
Reviewed-by: Rob Pike <r@golang.org>
The callee-saved registers must be saved because for the c-shared case
this code is invoked from C code in the system library, and that code
expects the registers to be saved. The tests were passing because in
the normal case the code calls a cgo function that naturally saves
callee-saved registers anyhow. However, it fails when the code takes
the non-cgo path.
Change-Id: I9c1f5e884f5a72db9614478049b1863641c8b2b9
Reviewed-on: https://go-review.googlesource.com/9114
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Turns out all the necessary pieces have already been submitted.
Change-Id: I19c8d614cd756821ce400ca7a338029002780b18
Reviewed-on: https://go-review.googlesource.com/9076
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Change-Id: I0d3f9841500e0a41f1c427244869bf3736a31e18
Reviewed-on: https://go-review.googlesource.com/9075
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
In https://golang.org/cl/7797 I attempted to use myimportpath to set the value
of the go.importpath.$foo. symbol for the module being compiled, but I messed
it up and only set the name (which the linker rewrites anyway). This lead to
the importpath for the module being compiled being "". This was hard to notice,
because all modules that import another define the importpath for their
imported modules correctly -- but main is not imported, and this meant that the
reflect module saw all fields of all types defined in the main module as
exported.
The fix is to do what I meant to do the first time, add a test and change the
go tool to compile main packages with -p main and not -p
command-line-arguments.
Fixes#10332
Change-Id: I5fc6e9b1dc2b26f058641e382f9a56a526eca291
Reviewed-on: https://go-review.googlesource.com/8481
Reviewed-by: Russ Cox <rsc@golang.org>
This avoids a race condition with go1.go wanting to examine files in
the current directory with filepath.Walk(".", walkFn).
Fixes#10497.
Change-Id: I2159f40a08d1a768195dbb7ea3c27e38cf9740bb
Reviewed-on: https://go-review.googlesource.com/9110
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change fixes inconsistent error values on Accept{,TCP,Unix}.
Updates #4856.
Change-Id: Ie3bb534c19a724cacb3ea3f3656e46c810b2123f
Reviewed-on: https://go-review.googlesource.com/8996
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change fixes inconsistent error values on Close, CloseRead and
CloseWrite.
Updates #4856.
Change-Id: I3c4d46ccd7d6e1a2f52d8e75b512f62c533a368d
Reviewed-on: https://go-review.googlesource.com/8994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change fixes inconsistent error values on Write,
WriteTo{,UDP,IP,Unix} and WriteMsg{UDP,IP,Unix}.
Updates #4856.
Change-Id: I4208ab6a0650455ad7d70a80a2d6169351d6055f
Reviewed-on: https://go-review.googlesource.com/8993
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change fixes inconsistent error values on Read,
ReadFrom{,UDP,IP,Unix} and ReadMsg{UDP,IP,Unix}.
Updates #4856.
Change-Id: I7de5663094e09be2d78cdb18ce6f1e7ec260888d
Reviewed-on: https://go-review.googlesource.com/8992
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Clear out gg.go files, and move things into consistent places between
the cmd/?g directories.
Change-Id: I81e04180613b806e0bfbb88519e66111ce9f74a3
Reviewed-on: https://go-review.googlesource.com/9080
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change adds a type addrinfoErrno to represent getaddrinfo,
getnameinfo-specific errors, and uses it in cgo-based lookup functions.
Also retags cgo files for clarification and does minor cleanup.
Change-Id: I6db7130ad7bf35bbd4e8839a97759e1364c43828
Reviewed-on: https://go-review.googlesource.com/9020
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I have left the Diag calls in place where I believe Ctxt.Cursym != nil
which means this CL is not the improvement I had hoped for. However
it is now safe to call Exitf whereever you are in the linker, which
makes it easier to reason about some code.
Change-Id: I8261e761ca9719f7d216e2747314adfe464e3337
Reviewed-on: https://go-review.googlesource.com/8668
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also use os.Expand for variable substitution so ${x}y works.
Fixes#9960.
Change-Id: Ic8239b2e737d1f41910dde8ee9524ac48907cb03
Reviewed-on: https://go-review.googlesource.com/9007
Reviewed-by: Russ Cox <rsc@golang.org>
Change-Id: I87147ca6bb53e3121cc4245449c519509f107638
Reviewed-on: https://go-review.googlesource.com/9009
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>