Recent Xcode versions started to complain about the current min
version:
ld: warning: OS version (6.0.0) too small, changing to 7.0.0
Change-Id: Ieb525dd3e57429fe226b9d30d584b073c5e4768c
Reviewed-on: https://go-review.googlesource.com/c/go/+/204663
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
iostest.bash might not live much longer, and all.bash is much
less confusing and more explicit.
Change-Id: If42e8716bbbb02aa3f817dceaabb1aa8076aae1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/175178
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The iOS exec wrapper copies the environment variables to the binary
running on the device. However, some variables such as HOME, TMPDIR and
GOCACHE refer to directories that might not be valid on the device.
The wrapper already ignores HOME and TMPDIR, but after GO111MODULE
was flipped to on for the standard library, cmd/go tests started
failing without a valid and writable GOCACHE.
It took a while to reproduce because go test does not set an explicit
GOCACHE but cmd/dist test does.
Fixes#30914
Change-Id: If186cddc5cfd7ad39a0b3eb95f9c64a7d53a27e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/168557
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that modules are always on, cmd/go tests require a valid
GOCACHE. However, on iOS where the go tool is not available, the
cmd/go test driver ends up setting GOCACHE to the empty string.
Fix it by falling back to the builtin default cache directory.
The iOS exec wrapper passes the environment variables to the app
on the device, including $HOME used for the default cache directory.
Skip $HOME to let the device specific and writable $HOME be used
instead.
Should fix cmd/go on the iOS builders that broke when GO111MODULE
defaulted to on.
Change-Id: I0939f5b8aaa1d2db95e64c99f4130eee2d0b4d4d
Reviewed-on: https://go-review.googlesource.com/c/go/+/167938
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previous CLs added symlink evaulation to GOROOT and GOPATH.
Unfortunately that only fixed tests that ran outside GOROOT.
To fix the standard library tests, evaluate symlinks in the current
working directory as well.
Change-Id: Ia406a968235ae4321a1002567520105998582d15
Reviewed-on: https://go-review.googlesource.com/c/164699
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 163726 added workarounds to keep the iOS builders happy in
a symlinked temporary dir.
The workarounds also made the tests more realistic and improved
performance. Keep them but also handle symlinks better in the
exec wrapper.
Change-Id: Iaa2c03a1a3fb3aa5aaf62d79d52b63d5d8f11db5
Reviewed-on: https://go-review.googlesource.com/c/164698
Reviewed-by: Bryan C. Mills <bcmills@google.com>
If no GOIOS_DEV_ID is set, iostest.bash will eval the output of
detect.go. Prepend the note output by detect.go with # to make
the shell ignore it.
Went undetected for so long because the iOS builders usually run
with GOIOS_DEV_ID set.
Change-Id: I308eac94803851620ca91593f9a1aef79825187f
Reviewed-on: https://go-review.googlesource.com/c/144109
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
When running tests that fails to complete within the test timeout,
the go tool sends the test program a SIGQUIT signal to print
backtraces. However, for tests running with an exec wrapper, the
resulting backtraces will come from the exec wrapper process and
not the test program.
Change the iOS exec wrapper to forward SIGQUIT signals to the lldb
python driver and change the driver to forward the signals to the
running test on the device.
Before:
$ GOARCH=arm64 go test forever_test.go
lldb: running program
SIGQUIT: quit
PC=0x10816fe m=0 sigcode=0
goroutine 54 [syscall]:
syscall.Syscall6(0x7, 0x16ab, 0xc000033dfc, 0x0, 0xc000116f30, 0x0, 0x0, 0xc000116f30, 0x0, 0x1328820)
/Users/elias/go-tip/src/syscall/asm_darwin_amd64.s:41 +0x5 fp=0xc000033d48 sp=0xc000033d40 pc=0x10816d5
syscall.wait4(0x16ab, 0xc000033dfc, 0x0, 0xc000116f30, 0x90, 0x1200e00, 0x1)
/Users/elias/go-tip/src/syscall/zsyscall_darwin_amd64.go:34 +0x7b fp=0xc000033dc0 sp=0xc000033d48 pc=0x107e4eb
syscall.Wait4(0x16ab, 0xc000033e4c, 0x0, 0xc000116f30, 0xc0000fd518, 0x0, 0x0)
/Users/elias/go-tip/src/syscall/syscall_bsd.go:129 +0x51 fp=0xc000033e10 sp=0xc000033dc0 pc=0x107b7b1
os.(*Process).wait(0xc00008d440, 0x1095e2e, 0xc0000fd518, 0x0)
/Users/elias/go-tip/src/os/exec_unix.go:38 +0x7b fp=0xc000033e80 sp=0xc000033e10 pc=0x109af2b
os.(*Process).Wait(0xc00008d440, 0xc000033fb0, 0x10, 0x11d1f00)
/Users/elias/go-tip/src/os/exec.go:125 +0x2b fp=0xc000033eb0 sp=0xc000033e80 pc=0x109a47b
os/exec.(*Cmd).Wait(0xc0000b1ce0, 0xc000033f90, 0x11394df)
/Users/elias/go-tip/src/os/exec/exec.go:463 +0x5b fp=0xc000033f28 sp=0xc000033eb0 pc=0x1136f0b
main.startDebugBridge.func1(0xc0000b1ce0, 0xc0000b8ae0, 0xc0000e2a80)
/Users/elias/go-tip/misc/ios/go_darwin_arm_exec.go:314 +0x40 fp=0xc000033fc8 sp=0xc000033f28 pc=0x11a1980
runtime.goexit()
/Users/elias/go-tip/src/runtime/asm_amd64.s:1360 +0x1 fp=0xc000033fd0 sp=0xc000033fc8 pc=0x10565a1
created by main.startDebugBridge
/Users/elias/go-tip/misc/ios/go_darwin_arm_exec.go:313 +0x15f
...
After:
$ GOARCH=arm64 go test forever_test.go
lldb: running program
=== RUN TestForever
SIGQUIT: quit
PC=0x100144e24 m=0 sigcode=0
...
goroutine 19 [select (no cases)]:
command-line-arguments.TestForever(0x1300b60f0)
/Users/elias/go-tip/src/forever_test.go:6 +0x18
testing.tRunner(0x1300b60f0, 0x100211aa0)
/Users/elias/go-tip/src/testing/testing.go:795 +0xa8
created by testing.(*T).Run
/Users/elias/go-tip/src/testing/testing.go:840 +0x22c
...
Change-Id: I6b3cf1662d07a43ade0530842733b0944bee1ace
Reviewed-on: https://go-review.googlesource.com/112676
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The idevicedebugserverproxy command takes a port number without a
flag, like so:
idevicedebugserverproxy 3222
If the -u <device_id> flag is added afterwards, it is ignored and
the command use an arbitrary device. Instead, always inject the -u
flag before any other idevice command arguments.
While here, also kill any leftover idevicedebugserverproxy instance
previous (failed) runs might have left running.
Change-Id: I0bf06ed1a20ef225abeca183f9ba8f396662d435
Reviewed-on: https://go-review.googlesource.com/112216
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that the iOS exec wrapper uninstalls any existing test app before
installing a new, looking up the device app path might fail. Before,
the lookup always succeeded (even though the path reported might be
stale).
For the iOS builder.
Change-Id: I5667b6fae15f88745bdee796db219a429a26e203
Reviewed-on: https://go-review.googlesource.com/112075
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Tests can fail because there is leftover data from a previous run.
For example:
--- FAIL: TestRemoveAll (0.00s)
path_test.go:96: RemoveAll "/private/var/mobile/Containers/Data/Application/66247524-5ED7-45A4-82AA-6BF15D6078B2/tmp//_TestRemoveAll_" (first): open /private/var/mobile/Containers/Data/Application/66247524-5ED7-45A4-82AA-6BF15D6078B2/tmp//_TestRemoveAll_/dir: permission denied
FAIL
FAIL os 31.275s
There seem to be no way to simply clear the app data for an app
short of uninstalling it, so do that.
This change in effect undoes CL 106676, which means that running iOS
is a little slower again, and that another app from the same
apple developer account must be present on the device for our app
install to succeed.
Change-Id: Iacc3a6f95c93568f4418db45e1098c7c7fdb88e0
Reviewed-on: https://go-review.googlesource.com/111795
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It turns out that a non-empty result from ideviceimagemounter does
not mean an image is mounted. Use ideviceimagemounter's xml output
mode to improve the check.
Also, iOS versions are reported as major.minor or major.minor.patch.
Developer images are only specific to major.minor version, so cut
off the patch number in the search, if present.
Change-Id: Ia182e6f4655b7e6aa6feb8005cd3b533535b73cd
Reviewed-on: https://go-review.googlesource.com/111235
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Sometimes, a newly installed the test app is not ready to launch
or the reported app path is stale. Pause and retry the launch if
the lldb script did not run the program.
Change-Id: Ic7745d4b5a02f2e3cb8134341859039812f65a65
Reviewed-on: https://go-review.googlesource.com/111216
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
log.Fatal exits the process and doesn't allow deferred functions
to run. Extract log.Fatal calls to main where all deferred functions
have completed.
For the iOS builder.
Change-Id: Id1ef9955bed19944a819d6137a611d6ecbe624a6
Reviewed-on: https://go-review.googlesource.com/110955
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Sometimes ideviceinstaller fails to install the app. Retry a few
times before giving up.
For the iOS builder.
Change-Id: Ib066ffd4f97ae8d22c0fa9a78ea4d04f67c17410
Reviewed-on: https://go-review.googlesource.com/111055
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If TMPDIR is not set, the iOS runtime will automatically set TMPDIR
to a valid app temporary path.
For the iOS builders.
Change-Id: Ia82404059dcb10678f0a6e0c96d5efc79a5485fd
Reviewed-on: https://go-review.googlesource.com/110956
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The iOS exec wrapper uses ios-deploy to set up a device, install
the wrapped app, and start a lldb session to run it. ios-deploy is
not built to be scripted, as can be seen from the brittle way it is
driven by the Go wrapper. There are many timeouts and comments such
as
"
// lldb tries to be clever with terminals.
// So we wrap it in script(1) and be clever
// right back at it.
"
This CL replaces the use of ios-deploy with a lldb driver script in
Python. lldb is designed to be scripted, so apart from getting rid
of the ios-deploy dependency, we gain:
- No timouts and scripting ios-deploy through stdin and parsing
stdout for responses.
- Accurate exit codes.
- Prompt exits when the wrapped binary fails for some reason. Before,
the go test timeout would kick in to fail the test.
- Support for environment variables.
- No noise in the test output. Only the test binary output is output
from the wrapper.
We have to do more work with the lldb driver: mounting the developer
image on the device, running idevicedebugserverproxy and installing
the app. Even so, the CL removes almost as many lines as it adds.
Furthermore, having the steps split up helps to tell setup errors
from runtime errors.
Change-Id: I48cccc32f475d17987283b2c93aacc3da18fe339
Reviewed-on: https://go-review.googlesource.com/107337
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
First, take the exclusive lock that ensures only one running binary
later: after assembling the gotest.app directory and signing it.
Second, don't pass -r to ios-deploy. The -r flag uninstalls the
app before installing it. It seems unnecessary, takes extra time
and if there was only the one developer app on the phone, it
will drop the developer permission on uninstall.
Change-Id: Ia222d3e5c2e1e2285f53074eb952941fd45fadd9
Reviewed-on: https://go-review.googlesource.com/106676
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
CL 106096 changed the iOS exec wrapper to directly run the binary
without waiting for a SIGINT signal, but did so in a way that
expects a "(lldb)" response from lldb in 2 seconds. Lldb might
not out output anything until the program finishes, so change the
exec wrapper to just fire and forget the the run command and go
straight to waiting for exit, successfully or otherwise.
Change-Id: I6a2dc63f9b29fe44edb3591afb048b9a8e2e0822
Reviewed-on: https://go-review.googlesource.com/106176
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To enable the exec wrapper go_darwin_arm_exec.go to run binaries
on iOS devices, the GOIOS_DEV_ID variable needs to be set to a code
signing identity. The program detect.go attempts to detect suitable
values for GOIOS_DEV_ID (along with GOIOS_APP_ID and GOIOS_TEAM_ID).
Before this change, detect.go would use "security find-identity
-p codesigning -v" to list all available identities for code signing
and pick the first one with "iPhone Developer" in its name. However,
that pick might be invalid since if it was replaced by an identity
issued later.
For example, on the mobile builder:
$ security find-identity -p codesigning -v
1) 0E251DE41FE4490574E475AC320B47F58D6D3635 "lldb_codesign"
2) 0358588D07AA6A19478981BA405F40A97F95F187 "iPhone Developer: xxx@xxx (2754T98W8E)"
3) FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E "iPhone Developer: xxx@xxx (2754T98W8E)"
3 valid identities found
In this case, the identity 0358588D07AA6A19478981BA405F40A97F95F187
is picked by detect.go even though it has been invalidated by
FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E.
Instead of attempting to find an identity from the "security
find-identity" list, use the identity from the CommonName in the
embedded certificate in the provisioning file. The CommonName only
lists the identity name (iPhone Developer: xxx@xxx (2754T98W8E)),
not the fingerprint (FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E), but
fortunately the codesign tool accepts both.
Identity names may not be unique, as demonstrated by the example,
but that will result in an ambiguity error at codesigning instead of
a more obscure error about an invalid identity when
go_darwin_arm_exec.go runs a binary.
The fix is then to delete the invalid identity from the system
keychain.
While here, find all connected devices instead of the first connected
and only consider provision files that covers them all. This matters
for the mobile builder where two devices are connected.
Change-Id: I6beb59ace3fc5e071ba76222a20a607765943989
Reviewed-on: https://go-review.googlesource.com/105436
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Once upon a time, the iOS exec wrapper needed to change the current
working directory for the binary being tested. To allow that, the
runtime raised a SIGINT signal that the wrapper caught, changed the
working directory and resumed the process.
These days, the current working directory is passed from the wrapper
to the runtime through a special entry in the app metadata and the
SIGINT handshake is not necessary anymore.
Remove the signaling from the runtime and the exec harness.
Change-Id: Ia53bcc9e4724d2ca00207e22b91ce80a05271b55
Reviewed-on: https://go-review.googlesource.com/106096
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The iOS test harness dumps the output of its lldb session to stdout,
but only if the lldb session was successfully started.
Make sure the log is always dumpede, so that lldb startup failures
such as
lldb setup error: exited (lldb start: exit status 253)
can be diagnosed.
For the iOS builders.
Change-Id: Ie0e3341dd8f84a88d26509c34816668d3ebbfaa0
Reviewed-on: https://go-review.googlesource.com/76195
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The lldb child process is killed if a test runs too long. Also
kill it when the setup times out (and is retried).
Might help with builder flakes where all 5 attempts to start up
lldb fail even though the tests before and after the timeouts
succeed. For example:
...
ok vendor/golang_org/x/net/route 37.797s
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
go_darwin_arm_exec: failed to start test harness (retry attempted)
FAIL vendor/golang_org/x/text/transform 115.185s
ok vendor/golang_org/x/text/unicode/norm 122.773s
...
Change-Id: I6638860522896491dccfa12f1e520c0f23df6d66
Reviewed-on: https://go-review.googlesource.com/67791
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When running multiple iOS builds on the same host, GOIOS_DEVICE_ID
is used to distinguish the devices. To improve support,
- Only restart the particular device when invoking iostest.bash
with the -restart flag.
- Make the exec wrapper lock file per-device.
For the iOS builder.
Change-Id: Id6f222981f25036399a43c3202a393dba89d87cb
Reviewed-on: https://go-review.googlesource.com/57970
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If set, GOIOS_DEVICE_ID specifies the device id for the iOS exec
wrapper. With that, a single builder can host multiple iOS devices.
Change-Id: If3cc049552f5edbd7344befda7b8d7f73b4236e2
Reviewed-on: https://go-review.googlesource.com/57296
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: JBD <jbd@google.com>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
The "lldb start" phase often times out on the iOS builder. Increase
the timeout and see if that helps.
Change-Id: I92fd67cbfa90659600e713198d6b2c5c78dde20f
Reviewed-on: https://go-review.googlesource.com/41863
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some tests need the src/runtime/textflag.h file. Make sure it is
included in iOS test runs.
Change-Id: I5e0e7ebe85679686ef15a7d336f28ac9b68a587a
Reviewed-on: https://go-review.googlesource.com/40915
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS test harness was recently changed in response to lldb bugs
to replace breakpoints with the SIGUSR2 signal (CL 34926), and to
pass the current directory in the test binary arguments (CL 35152).
Both the signal sending and working directory setup is done from
the go test driver.
However, the new method doesn't work with tests where a C program is
the test driver instead of go test: the current working directory
will not be changed and SIGUSR2 is not raised.
Instead of copying that logic into any C test program, rework the
test harness (again) to move the setup logic to the early runtime
cgo setup code. That way, the harness will run even in the library
build modes.
Then, use the app Info.plist file to pass the working
directory, removing the need to alter the arguments after running.
Finally, use the SIGINT signal instead of SIGUSR2 to avoid
manipulating the signal masks or handlers.
Fixes the testcarchive tests on iOS.
With this CL, both darwin/arm and darwin/arm64 passes all.bash.
This CL replaces CL 34926, CL 35152 as well as the fixup CL
35123 and CL 35255. They are reverted in CLs earlier in the
relation chain.
Change-Id: I8485c7db1404fbd8daa261efd1ea89e905121a3e
Reviewed-on: https://go-review.googlesource.com/36090
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 333f764df3.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I70a1d2f0aa5aa0d3d0ec85b5a956c6fb60d88908
Reviewed-on: https://go-review.googlesource.com/36069
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 593ea3b360.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I6963e4d1bf38e7028cf545a953e28054d83548
Change-Id: I6963e4d1bf38e7028cf545a953e28054d8354870
Reviewed-on: https://go-review.googlesource.com/36067
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 467109bf56.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: Ib90813b5a6c4716b563c8496013d2d57f9c022b8
Reviewed-on: https://go-review.googlesource.com/36066
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Tests that use TestMain might never call m.Run(), and simply return
from TestMain. In that case, the iOS test harness never sees the
PASS from the testing framework and assumes the test failed.
Allow an exit with exit code 0 to also mean test success, thereby
fixing the objdump test on iOS.
Change-Id: I1fe9077b05931aa0905e41b88945cd153c5b35b6
Reviewed-on: https://go-review.googlesource.com/36065
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If -test.timeout is not specified to go test, it will time out after
a default 10 minutes.
The iOS exec wrapper also contains a fail safe timeout mechanism for
a stuck device. However, if no explicit -test.timeout is specified,
it will use a timeout of 0, plus some constant amount.
Use the same default timeout in the exec wrapper as for go test,
10 minutes.
Change-Id: I6465ccd9f7b9ce08fa302e6697f7938a0ea9af34
Reviewed-on: https://go-review.googlesource.com/36062
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS exec wrapper use the constant bundle id "golang.gotest" for
running Go programs on iOS. However, that only happens to work on
the old iOS builders where their provisioning profile covers
that bundle id.
Expand the detection script to list all available provisioning
profiles for the attached device and include the bundle id in the
GOIOS_APP_ID environment variable.
To allow the old builders to continue, the "golang.gotest" bundle
id is used as a fallback if only the app id prefix is specified in
GOIOS_APP_ID.
For the new builders.
Change-Id: I8baa1d4d57f845de851c3fad3f178e05e9a01b17
Reviewed-on: https://go-review.googlesource.com/36060
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On (at least) macOS 10.12, the `security cms` subcommand used by the
iOS detection script will output an error to stderr. The command
otherwise succeeds, but the extra line confuses a later parsing step.
To fix it, use only stdout and ignore stderr from every command run
by detect.go.
For the new iOS builders.
Change-Id: Iee426da7926d7f987ba1be061fa92ebb853ef53d
Reviewed-on: https://go-review.googlesource.com/36059
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The working directory is now adjusted to match the typical Go test
working directory in main, as the old trick for adjusting earlier
stopped working with the latest version of LLDB bugs.
That means the small number of places where testdata files are
read before main is called no longer work. This CL adjusts those
reads to happen after main is called. (This has the bonus effect of
not reading some benchmark testdata files in all.bash.)
Fixes compress/bzip2, go/doc, go/parser, os, and time package
tests on the iOS builder.
Change-Id: If60f026aa7848b37511c36ac5e3985469ec25209
Reviewed-on: https://go-review.googlesource.com/35255
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another change in behvaior (bug) in LLDB. Despite the fact that
LLDB can dump the symtab of our test binaries and show the function
addresses, it can no longer call the functions. This means the chdir
trick on signal is failing.
This CL uses a new trick. For iOS, the exec script passes the change
in directory as an argument, and it is processed early by the test
harness generated by cmd/go.
For the iOS builders.
Change-Id: I8f5d0f831fe18de99f097761f89c5184d5bf2afb
Reviewed-on: https://go-review.googlesource.com/35152
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS test harness has set a breakpoint early in the life of Go
programs so that it can change the current working directory using
information only available from the host debugger. Somewhere in the
upgrade to iOS 10 / XCode 8.2, breakpoints stopped working. This
may be an LLDB bug, or a bug in the ios-deploy LLDB scripts, it's
not clear.
Work around the problem by giving up on breakpoints. Instead, early
in the life of every test binary built for iOS, send (and ignore) a
SIGUSR2 signal. The debugger will catch this, giving the script
go_darwin_arm_exec a chance to change the working directory.
For the iOS builders.
Change-Id: I7476531985217d0c76bc176904c48379210576c2
Reviewed-on: https://go-review.googlesource.com/34926
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Xcode 8.0 has been donen't support the iOS 5 anymore
Fixes#18390.
Change-Id: Icc97e09424780c610a8fe173d0cf461d76b06da4
Reviewed-on: https://go-review.googlesource.com/34673
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The exec wrapper lock file was opened, locked and then never used
again, assuming it would close and unlock at process exit.
However, the garbage collector could collect and run the *os.File
finalizer that closes the file prematurely, rendering the lock
ineffective.
Make the lock global so that the lock is live during the entire
execution.
(Hopefully) fix the iOS builders.
Change-Id: I62429e92042a0a49c4f1ea553fdb32b6ea53a43e
Reviewed-on: https://go-review.googlesource.com/21137
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The iOS exec wrapper use complicated machinery to run a iOS binary
on a device.
Running several binaries concurrently doesn't work (reliably), which
can break tests running concurrently. For my setup, the
runtime:cpu124 and sync_cpu tests can't run reliably without one of them
crashing.
Add a file lock to the exec wrapper to serialize execution.
Fixes#14318 (for me)
Change-Id: I023610e014b327f8d66f1d2fd2e54dd0e56f2be0
Reviewed-on: https://go-review.googlesource.com/21074
Reviewed-by: David Crawshaw <crawshaw@golang.org>
A retry mechanism is in place to combat the inherent flakiness of
launching iOS test binaries. Before it covered just the starting of
lldb; expand it to cover the setup steps as well. Note that the
running of the binary itself is (still) not retried, to avoid
covering over genuine bugs.
On my test device (iPhone 5S, iOS 9.3) starting lldb can take longer
than 10 seconds, so increase the timeout for that.
Furthermore, some basic steps such as setting breakpoints in lldb
can take longer than the 1 second timeout. Increase that timeout
as well, to 2 seconds.
Finally, improve the error message for when ios-deploy is not
installed.
For #14318
Change-Id: Iba41d1bd9d023575b9454cb577b08f8cae081c2a
Reviewed-on: https://go-review.googlesource.com/21072
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Instruct lldb to pass through SIGCONT unhindered when running iOS
tests. Fixes the TestSIGCONT test in os/signal.
For #14318
Change-Id: I669264208cc3d6ecae9fbc8790e0b753a93a5e04
Reviewed-on: https://go-review.googlesource.com/21071
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The existing go_darwin_arm_exec.go script does not work with Xcode 7,
not due to any significant changes, but just ordering and timing of
statements from lldb. Unfortunately the current design of
go_darwin_arm_exec.go makes it not obvious what gets stuck where, so
this moves from a moving buffer window to a complete buffer of the
lldb output.
The result is easier code to follow, and it works with Xcode 7.
Updates #12660.
Change-Id: I3b8b890b0bf4474119482e95d84e821a86d1eaed
Reviewed-on: https://go-review.googlesource.com/16634
Reviewed-by: Michael Matloob <matloob@golang.org>
The error message should indicate the name of the unset variable,
rather than the value. The value will alwayse be empty.
Change-Id: I6f6c165074dfce857b6523703a890d205423cd28
Reviewed-on: https://go-review.googlesource.com/16555
Reviewed-by: David Crawshaw <crawshaw@golang.org>
