In cmd/compile, we can directly construct obj.Auto to represent local
variables and attach them to the function's obj.LSym.
In preparation for being able to emit more precise DWARF info based on
other compiler available information (e.g., lexical scoping).
Change-Id: I9c4225ec59306bec42552838493022e0e9d70228
Reviewed-on: https://go-review.googlesource.com/36420
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Currently both _MaxMem and _MaxArena32 represent the maximum arena
size on 32-bit hosts (except on MIPS32 where _MaxMem is confusingly
smaller than _MaxArena32).
Clean up sysAlloc so that it always uses _MaxMem, which is the maximum
arena size on both 32- and 64-bit architectures and is the arena size
we allocate auxiliary structures for. This lets us simplify and unify
some code paths and eliminate _MaxArena32.
Fixes#18651. mheap.sysAlloc currently assumes that if the arena is
small, we must be on a 32-bit machine and can therefore grow the arena
to _MaxArena32. This breaks down on darwin/arm64, where _MaxMem is
only 2 GB. As a result, on darwin/arm64, we only reserve spans and
bitmap space for a 2 GB heap, and if the application tries to allocate
beyond that, sysAlloc takes the 32-bit path, tries to grow the arena
beyond 2 GB, and panics when it tries to grow the spans array
allocation past its reserved size. This has probably been a problem
for several releases now, but was only noticed recently because
mapSpans didn't check the bounds on the span reservation until
recently. Most likely it corrupted the bitmap before. By using _MaxMem
consistently, we avoid thinking that we can grow the arena larger than
we have auxiliary structures for.
Change-Id: Ifef28cb746a3ead4b31c1d7348495c2242fef520
Reviewed-on: https://go-review.googlesource.com/35253
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
mallocinit has evolved organically. Make a pass to clean it up in
various ways:
1. Merge the computation of spansSize and bitmapSize. These were
computed on every loop iteration of two different loops, but always
have the same value, which can be derived directly from _MaxMem.
This also avoids over-reserving these on MIPS, were _MaxArena32 is
larger than _MaxMem.
2. Remove the ulimit -v logic. It's been disabled for many releases
and the dead code paths to support it are even more wrong now than
they were when it was first disabled, since now we *must* reserve
spans and bitmaps for the full address space.
3. Make it clear that we're using a simple linear allocation to lay
out the spans, bitmap, and arena spaces. Previously there were a
lot of redundant pointer computations. Now we just bump p1 up as we
reserve the spaces.
In preparation for #18651.
Updates #5049 (respect ulimit).
Change-Id: Icbe66570d3a7a17bea227dc54fb3c4978b52a3af
Reviewed-on: https://go-review.googlesource.com/35252
Reviewed-by: Russ Cox <rsc@golang.org>
Currently _MaxMem is a uintptr, which is going to complicate some
further changes. Make it untyped so we'll be able to do untyped math
on it before truncating it to a uintptr.
The runtime assembly is identical before and after this change on
{linux,windows}/{amd64,386}.
Updates #18651.
Change-Id: I0f64511faa9e0aa25179a556ab9f185ebf8c9cf8
Reviewed-on: https://go-review.googlesource.com/35251
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This code is dead as a result of
* removing the Follow pass
* moving rotation detection from walk to ssa
Change-Id: I14599c85bedb4e3148347b547e724187920182c4
Reviewed-on: https://go-review.googlesource.com/36484
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The compiler did not emit write barrier for assigning global with
struct literal, like global = T{} where T contains pointer.
The relevant code path is:
walkexpr OAS var_ OSTRUCTLIT
oaslit
anylit OSTRUCTLIT
walkexpr OAS var_ nil
return without adding write barrier
return true
break (without adding write barrier)
This CL makes oaslit not apply to globals. See also CL
https://go-review.googlesource.com/c/36355/ for an alternative
fix.
The downside of this is that it generates static data for zeroing
struct now. Also this only covers global. If there is any lurking
bug with implicit zeroing other than globals, this doesn't fix.
Fixes#18956.
Change-Id: Ibcd27e4fae3aa38390ffa94a32a9dd7a802e4b37
Reviewed-on: https://go-review.googlesource.com/36410
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We added CentOS 7's /etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem
to the list in response to #17549 - not being able to find any certs otherwise.
Now we have #18813, where CentOS 6 apparently has both that file
and /etc/pki/tls/certs/ca-bundle.crt, and the latter is complete while
the former is not.
Moving the new CentOS 7 file to the bottom of the list should fix both
problems: the CentOS 7 system that didn't have any of the other files
in the list will still find the new one, and existing systems will still
keep using what they were using instead of preferring the new path
that may or may not be complete on some systems.
Fixes#18813.
Change-Id: I5275ab67424b95e7210e14938d3e986c8caee0ba
Reviewed-on: https://go-review.googlesource.com/36429
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
It looks like this conditional may have been refactored at some point,
but the logic was still very confusing. The outer conditional checks if
the function is variadic, so there's no need to verify that in the
result. Additionally, since the function isn't variadic, there is no
reason to permit the function call if the number of input arguments is
less than the function signature requires.
Change-Id: Ia957cf83d1c900c08dd66384efcb74f0c368422e
Reviewed-on: https://go-review.googlesource.com/35491
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The doc comment for Rectangle.Intersect clearly states, "If the two
rectangles do not overlap then the zero rectangle will be returned."
Prior to this fix, calling Intersect on adjacent but non-overlapping
rectangles would return an empty but non-zero rectangle.
The fix essentially changes
if r.Min.X > r.Max.X || r.Min.Y > r.Max.Y { etc }
to
if r.Min.X >= r.Max.X || r.Min.Y >= r.Max.Y { etc }
(note that the > signs have become >= signs), but changing that line to:
if r.Empty() { etc }
seems clearer (and equivalent).
Change-Id: Ia654e4b9dc805978db3e94d7a9718b6366005360
Reviewed-on: https://go-review.googlesource.com/34853
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is a follow-up on https://go-review.googlesource.com/36470
and leads to a more stable fix. The above CL relied on filtering
of multiple errors on the same line to avoid more than one error
for an `if` statement of the form `if a := 10 {}`. This CL avoids
the secondary error ("missing condition in if statement") in the
first place.
For #18915.
Change-Id: I8517f485cc2305965276c17d8f8797d61ef9e999
Reviewed-on: https://go-review.googlesource.com/36479
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When running benchmarks, print "goos", "goarch", and "pkg"
labels. This makes it easier to refer to benchmark logs and understand
how they were generated. "pkg" is printed only for benchmarks located
in GOPATH.
Change-Id: I397cbdd57b9fe8cbabbb354ec7bfba59f5625c42
Reviewed-on: https://go-review.googlesource.com/36356
Run-TryBot: Quentin Smith <quentin@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
For code such as
if a := 10 { ...
the 1.7 compiler reported
a := 10 used as value
while the 1.8 compiler reported
invalid condition, tag, or type switch guard
Changed the error message to match the 1.7 compiler.
Fixes#18915.
Change-Id: I01308862e461922e717f9f8295a9db53d5a914eb
Reviewed-on: https://go-review.googlesource.com/36470
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes all external uses of Linksym and Pkglookup, which are the only
two exported functions that return Syms.
Also add Duffcopy and Duffzero since they're used often enough across
SSA backends.
Passes toolstash -cmp.
Change-Id: I8d3fd048ad5cd676fc46378f09a917569ffc9b2c
Reviewed-on: https://go-review.googlesource.com/36418
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Now `go test -buildmode=pie std -short` passes on linux/amd64.
Updates #18968
Change-Id: Ide21877713e00edc64c1700c950016d6bff8de0e
Reviewed-on: https://go-review.googlesource.com/36417
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Gc's Sym type represents a package-qualified identifier, which is a
frontend concept and doesn't belong in SSA. Bonus: we can replace some
interface{} types with *obj.LSym.
Passes toolstash -cmp.
Change-Id: I456eb9957207d80f99f6eb9b8eab4a1f3263e9ed
Reviewed-on: https://go-review.googlesource.com/36415
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This change defines runtime/pprof.SetGoroutineLabels and runtime/pprof.Do, which
are used to set profiler labels on goroutines. The change defines functions
in the runtime for setting and getting profile labels, and sets and unsets
profile labels when goroutines are created and deleted. The change also adds
the package runtime/internal/proflabel, which defines the structure the runtime
uses to store profile labels.
Change-Id: I747a4400141f89b6e8160dab6aa94ca9f0d4c94d
Reviewed-on: https://go-review.googlesource.com/34198
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-on: https://go-review.googlesource.com/35010
We shouldn't use CONVNOP for conversions between two different
nonempty interface types, because we want to update the itab
in those situations.
Fixes#18595
After this CL, we are guaranteed that itabs are unique, that is
there is only one itab per compile-time-type/concrete type pair.
See also the tests in CL 35115 and 35116 which make sure this
invariant holds even for shared libraries and plugins.
Unique itabs are required for CL 34810 (faster type switch code).
R=go1.9
Change-Id: Id27d2e01ded706680965e4cb69d7c7a24ac2161b
Reviewed-on: https://go-review.googlesource.com/35119
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This has a notable impact on systems with very large passwd files.
Before:
BenchmarkCurrent-12 30000 42546 ns/op
After:
BenchmarkCurrent-12 20000000 77.5 ns/op
Saved in perf dashboard:
https://perf.golang.org/search?q=upload:20170206.1Fixes#11625
Change-Id: Iebc9bf122cc64a4cab24ac06843c7b2bc450ded9
Reviewed-on: https://go-review.googlesource.com/36391
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Use fewer instructions to calculate the average of i and j without
overflowing at the addition.
Even if both i and j are math.MaxInt{32,64}, the sum fits into a
uint{32,64}. Because the sum of i and j is always ≥ 0, the right
shift by one does the same as a division by two. The result of the
shift operation is at most math.MaxInt{32,64} and fits again into
an int{32,64}.
name old time/op new time/op delta
SearchWrappers-4 153ns ± 3% 143ns ± 6% -6.33% (p=0.000 n=90+100)
This calculation is documented in:
https://research.googleblog.com/2006/06/extra-extra-read-all-about-it-nearly.html
Change-Id: I2be7922afc03b3617fce32e59364606c37a83678
Reviewed-on: https://go-review.googlesource.com/36332
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change defines WithLabels, Labels, Label, and ForLabels.
This is the first step of the profile labels implemention for go 1.9.
Updates #17280
Change-Id: I2dfc9aae90f7a4aa1ff7080d5747f0a1f0728e75
Reviewed-on: https://go-review.googlesource.com/34198
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It's not used, it's never been used, and it doesn't do what its doc
comment says it does.
Fixes#18941.
Change-Id: Ia89d97fb87525f5b861d7701f919e0d6b7cbd376
Reviewed-on: https://go-review.googlesource.com/36322
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
CL 18057 added underscore to most external pe symbols
on windows/386/cgo. The CL changed runtime.epclntab and
runtime.pclntab pe symbols into _runtime.pclntab and
_runtime.epclntab, and now cmd/nm cannot find them.
Revert correspondent CL 18057 changes, because most pe
symbols do not need underscore prefix.
This CL also removes code that added obj.SHOSTOBJ symbols
explicitly, because each of those was also added via
genasmsym call. These created duplicate pe symbols (like
_GetProcAddress@8 and __GetProcAddress@8), and external
linker would complain.
This CL adds new test in cmd/nm to verify go programs
built with cgo.
Fixes#18416
Change-Id: I68b1be8fb631d95ec69bd485c77c79604fb23f26
Reviewed-on: https://go-review.googlesource.com/35076
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Avoid confusing use of $(( in non-arithmetic context.
Permit added targets linux-386-387 linux-arm-arm5 to be correctly
matched against pattern argument.
Change-Id: Ib004c926457acb760c7e270fdd2f4095b1787a6d
Reviewed-on: https://go-review.googlesource.com/33492
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Rather than collecting static data nodes to be written out later, just
write them out immediately.
Change-Id: I51708b690e94bc3e288b4d6ba3307bf738a80f64
Reviewed-on: https://go-review.googlesource.com/36352
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
go/build already ignores them, but they cause make.bash to fail.
Fixes#18931.
Change-Id: Idd5c8c2a6f2309ecd5f0d669660704d6f5612710
Reviewed-on: https://go-review.googlesource.com/36351
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently the net/rpc/jsonrpc package only implements JSON-RPC version
1.0. This change updates the package's documentation with link to find
packages for JSON-RPC 2.0.
Fixes#10929
Change-Id: I3b6f1d17738a1759d7b62ab7b3ecef5b248d30ca
Reviewed-on: https://go-review.googlesource.com/36330
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL fixes two issues:
1. Load ops were initially always lowered to unsigned loads, even
for signed types. This was fine by itself however LoadReg ops
(used to re-load spilled values) were lowered to signed loads
for signed types. This meant that spills could invalidate
optimizations that assumed the original unsigned load.
2. Types were not always being maintained correctly through rules
designed to eliminate unnecessary zero and sign extensions.
Fixes#18906.
Change-Id: I95785dcadba03f7e3e94524677e7d8d3d3b9b737
Reviewed-on: https://go-review.googlesource.com/36256
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Address review comments from earlier CLs.
These are changes I was too scared to try to push
down into the original CLs (thanks, Git).
Change-Id: I0e428fad73d71bd2a7d08178cf2e856de3cef19f
Reviewed-on: https://go-review.googlesource.com/36257
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: Ib22fc435827d4a05a77a5200ac437ce00e2a4da3
Reviewed-on: https://go-review.googlesource.com/36204
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I05629567cc33fef41bc74eba4f7ff66e4851343c
Reviewed-on: https://go-review.googlesource.com/36203
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: Iec17bf2243de129942ae5fba126ec5f217be7303
Reviewed-on: https://go-review.googlesource.com/36202
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I2f349150659b6ddf6be4c675abba38dfe57ff652
Reviewed-on: https://go-review.googlesource.com/36201
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I28b20d53d20dff06eede574eb5c20359db0d3991
Reviewed-on: https://go-review.googlesource.com/36200
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I8e325d75f553b5d0b6224b56a705d2e2cb895de4
Reviewed-on: https://go-review.googlesource.com/36199
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I2d0ccdb84814537ab8b8842aa1b5f5bc0a88a0fc
Reviewed-on: https://go-review.googlesource.com/36198
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: Icdd181098f9f0e81f68bf201e6867cdd8f820300
Reviewed-on: https://go-review.googlesource.com/36197
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: Ic802483e50598def638f1e2e706d5fdf7822d32d
Reviewed-on: https://go-review.googlesource.com/36196
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I20dbc352c3df3c83a75811dd8e78c580a46b2202
Reviewed-on: https://go-review.googlesource.com/36195
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I4cf05b076d81b780c87a31378523929b5da8964b
Reviewed-on: https://go-review.googlesource.com/36194
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I7c5dde6e7fe4f390e6607303b4d42535c674eac3
Reviewed-on: https://go-review.googlesource.com/36193
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I6ee5b053683034ea9462a9a0a4ea4f5ad24fa5a1
Reviewed-on: https://go-review.googlesource.com/36192
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: Icb3f168ade91e7da5fcab89ac75b768daefff359
Reviewed-on: https://go-review.googlesource.com/36191
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This is one CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I63f578f5ac99c707b599ac5659293c46b275567d
Reviewed-on: https://go-review.googlesource.com/36190
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL makes a few naming changes to break dependencies
between different parts of the go command, to make it easier
to split into different packages.
This is the first CL in a long sequence of changes to break up the
go command from one package into a plausible group of packages.
This sequence is concerned only with moving code, not changing
or cleaning up code. There will still be more cleanup after this sequence.
The entire sequence will be submitted together: it is not a goal
for the tree to build at every step.
For #18653.
Change-Id: I69a98b9ea48e61b1e1cda95273d29860b525415f
Reviewed-on: https://go-review.googlesource.com/36129
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Before this CL, Go programs in c-archive or c-shared buildmodes
would not handle SIGPIPE. That leads to surprising behaviour where
writes on a closed pipe or socket would raise SIGPIPE and terminate
the program. This CL changes the Go runtime to handle
SIGPIPE regardless of buildmode. In addition, SIGPIPE from non-Go
code is forwarded.
This is a refinement of CL 32796 that fixes the case where a non-default
handler for SIGPIPE is installed by the host C program.
Fixes#17393
Change-Id: Ia41186e52c1ac209d0a594bae9904166ae7df7de
Reviewed-on: https://go-review.googlesource.com/35960
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If there is a defer, and that defer recovers, then the caller
can see all of the output parameters. That means that we must
mark all the output parameters live at any point which might panic.
If there is no defer then this is not necessary. This is implemented.
We could also detect whether there is a recover in any of the defers.
If not, we would need to mark only output params that the defer
actually references (and the closure mechanism already does that).
This is not implemented.
Fixes#18860.
Change-Id: If984fe6686eddce9408bf25e725dd17fc16b8578
Reviewed-on: https://go-review.googlesource.com/36030
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
These rules trigger 116 times while running make.bash.
And at least for the sample code at
https://github.com/golang/go/issues/18906#issuecomment-277174241
they are providing optimizations not already present
in amd64.
Updates #18906
Change-Id: I410a480f566f5ab176fc573fb5ac74f9cffec225
Reviewed-on: https://go-review.googlesource.com/36217
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
sigtramp was calling sigtrampgo and depending on the fact that
the 3rd argument slot will not be modified on return. Our calling
convention doesn't guarantee that. Avoid that assumption.
There's no actual bug here, as sigtrampgo does not in fact modify its
argument slots. But I found this while working on the dead stack slot
clobbering tool. https://go-review.googlesource.com/c/23924/
Change-Id: Ia7e791a2b4c1c74fff24cba8169e7840b4b06ffc
Reviewed-on: https://go-review.googlesource.com/36216
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The name lookups are unrooted; the test should be unrooted too.
Correctly skips the tests if the DNS config specifies a domain
suffix that has a wildcard entry causing all unrooted names to resolve.
Change-Id: I80470326a5d332f3b8d64663f765fd304c5e0811
Reviewed-on: https://go-review.googlesource.com/36253
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It seems the problem is on gdb and the dynamic linker. Skip the
test for now until we figure out what's going on with the system.
Updates #18784.
Change-Id: Ic9320ffd463f6c231b2c4192652263b1cf7f4231
Reviewed-on: https://go-review.googlesource.com/36250
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing darwin/amd64 implementation of runtime.nanotime returns the
wallclock time, which results in timers not functioning properly when
system time runs backwards. By implementing the algorithm used by the
darwin syscall mach_absolute_time, timers will function as expected.
The algorithm is described at
https://opensource.apple.com/source/xnu/xnu-3248.60.10/libsyscall/wrappers/mach_absolute_time.sFixes#17610
Change-Id: I9c8d35240d48249a6837dca1111b1406e2686f67
Reviewed-on: https://go-review.googlesource.com/35292
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use (-x)>>63 instead of ((x-1)>>63)^-1 to get a mask that
is 0 when x is 0 and all ones when x is positive.
Saves one instruction when slicing.
Change-Id: Ib46d53d3aac6530ac481fa2f265a6eadf3df0567
Reviewed-on: https://go-review.googlesource.com/35641
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This ensures there isn't a live reference to buf1 on our stack
when MultiReader is inlined.
Fixes#18819.
Change-Id: I96a8cdc1ffad8f8a10c0ddcbf0299005f3176b61
Reviewed-on: https://go-review.googlesource.com/35931
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Instead of always appending to c.Values,
choose whichever slice is larger;
b.Values will be set to nil anyway.
Appending once instead of in a loop also
limits slice growth to once per function call
and is more efficient.
Reduces max rss for the program in #18602 by 6.5%,
and eliminates fuseBlockPlain from the alloc_space
pprof output. fuseBlockPlain previously accounted
for 16.74% of allocated memory.
Updates #18602.
Change-Id: I417b03722d011a59a679157da43dc91f4425210e
Reviewed-on: https://go-review.googlesource.com/35114
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove rotate generation from walk. Remove OLROT and ssa.Lrot* opcodes.
Generate rotates during SSA lowering for architectures that have them.
This CL will allow rotates to be generated in more situations,
like when the shift values are determined to be constant
only after some analysis.
Fixes#18254
Change-Id: I8d6d684ff5ce2511aceaddfda98b908007851079
Reviewed-on: https://go-review.googlesource.com/34232
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Intrinsics are ok to inline as they don't rewrite to actual calls.
Change-Id: Ieb19c834c61579823c62c6d1a1b425d6c4d4de23
Reviewed-on: https://go-review.googlesource.com/34272
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When we discover a relation x <= len(s), also discover the relation
x <= cap(s). That way, in situations like:
a := s[x:] // tests 0 <= x <= len(s)
b := s[:x] // tests 0 <= x <= cap(s)
the second check can be eliminated.
Fixes#16813
Change-Id: Ifc037920b6955e43bac1a1eaf6bac63a89cfbd44
Reviewed-on: https://go-review.googlesource.com/33633
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Reviewed-by: David Chase <drchase@google.com>
CSE opportunities were being missed for commutative ops. We used to
order the args of commutative ops (by arg ID) once at the start of CSE.
But that may not be enough.
i1 = (Load ptr mem)
i2 = (Load ptr mem)
x1 = (Add i1 j)
x2 = (Add i2 j)
Equivalent commutative ops x1 and x2 may not get their args ordered in
the same way because because at the start of CSE, we don't know that
the i values will be CSEd. If x1 and x2 get opposite orders we won't
CSE them.
Instead, (re)order the args of commutative operations by their
equivalence class IDs each time we partition an equivalence class.
Change-Id: Ic609fa83b85299782a5e85bf93dc6023fccf4b0c
Reviewed-on: https://go-review.googlesource.com/33632
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Fixes#10561.
Provides a better diagnostic message for failed type switch
satisfaction in the case that a value receiver is being used
in place of the pointer receiver that implements and satisfies
the interface.
Change-Id: If8c13ba13f2a8d81bf44bac7c3a66c12921ba921
Reviewed-on: https://go-review.googlesource.com/35235
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change-Id: Ib2c1490a42e3485913a05a0b2fecdcc425d42871
Reviewed-on: https://go-review.googlesource.com/36083
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#8481.
Inform the user that init functions cannot be directly invoked
in user code, as mandated by the spec at:
http://golang.org/ref/spec#Program_initialization_and_execution.
Change-Id: Ib12c0c08718ffd48b76b6f9b13c76bb6612d2e7b
Reviewed-on: https://go-review.googlesource.com/34790
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#15055.
Updates exprfmt printing using fmt verb "%v" to check that n.Left
is non-nil before attempting to print it, otherwise we'll print
the nodes in the list using verb "%.v".
Credit to @mdempsky for this approach and for finding
the root cause of the issue.
Change-Id: I20a6464e916dc70d5565e145164bb9553e5d3865
Reviewed-on: https://go-review.googlesource.com/25361
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The binary export format embeds type definitions inline as necessary,
so there's no need to add them to exportlist. Also, constants are
embedded directly by value, so they can be omitted too.
Change-Id: Id1879eb97c298a5a52f615cf9883c346c7f7bd69
Reviewed-on: https://go-review.googlesource.com/36170
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
When switching to the new parser, I changed cmd/compile to handle iota
per an intuitive interpretation of how nested constant declarations
should work (which also matches go/types).
Note: if we end up deciding that the current spec wording is
intentional (i.e., confirming gccgo's current behavior), the test will
need to be updated to expect 4 instead of 1.
Updates #15550.
Change-Id: I441f5f13209f172b73ef75031f2a9daa5e985277
Reviewed-on: https://go-review.googlesource.com/36122
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Sometimes STEXT symbols point to the first byte of .data
section, instead of the end of .text section. But, while writing
pe symbol table, we should treat them as if they belong to the
.text section. Change pe symbol table records for these symbols.
Fixes#14710
Change-Id: I1356e61aa8fa37d590d7b1677b2bac214ad0ba4e
Reviewed-on: https://go-review.googlesource.com/35272
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The comment for maxPtrmaskBytes implied that the value was still 16,
but that changed in CL 10815.
Change-Id: I86e304bc7d9d1a0a6b22b600fefcc1325e4372d9
Reviewed-on: https://go-review.googlesource.com/36120
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Adds helper function to auto-skip tests when DNS returns
a successful response for a domain known not to exist.
The error from `net.LookupHost` is intentionally ignored
because the DNS tests will fail anyway if there are issues
unrelated to NXDOMAIN responses.
Fixes#17884
Change-Id: I729391bd702218507561818668f791331295299e
Reviewed-on: https://go-review.googlesource.com/34516
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Notably, this change fixes the TestTCPReadWriteAllocs test because
the errnoErr wrapper is now used, elimitating the allocation for
common errnos.
The change to Dup is caused by a CL 8095 that changed the Dup* calls
to use Syscall instead of RawSyscall.
Found while working on the new iOS builders.
Change-Id: I44ab9dcad27db190e175aa149865b33944f48674
Reviewed-on: https://go-review.googlesource.com/36061
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
SNI values may not include a trailing dot according to
https://tools.ietf.org/html/rfc6066#section-3. Although crypto/tls
handled this correctly as a client, it didn't reject this as a server.
This change makes sending an SNI value with a trailing dot a fatal
error.
Updates #18114.
Change-Id: Ib7897ab40e98d4a7a4646ff8469a55233621f631
Reviewed-on: https://go-review.googlesource.com/33904
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
X.509v1 certificates are ancient and should be dead. (They are even
prohibited by the Baseline requirements, section 7.1.1.)
However, there are a number of v1 roots from the 1990's that are still
in operation. Thus crypto/x509.Certificate.CheckSignatureFrom allows
X.509v1 certificates to sign other certificates.
The chain building code, however, only allows v1 certificates to sign
others if they're a root. This change adds a test to check that.
Change-Id: Ib8d81e522f30d41932b89bdf3b19ef3782d8ec12
Reviewed-on: https://go-review.googlesource.com/34383
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ConnectionState.NegotiatedProtocol's documentation implies that it will
always be from Config.NextProtos. This commit clarifies that there is no
guarantee.
This commit also adds a note to
ConnectionState.NegotiatedProtocolIsMutual, making it clear that it is
client side only.
Fixes#18841
Change-Id: Icd028af8042f31e45575f1080c5e9bd3012e03d7
Reviewed-on: https://go-review.googlesource.com/35917
Reviewed-by: Filippo Valsorda <hi@filippo.io>
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing implementation falls back to using image.At()
for each pixel when encoding an *image.YCbCr which is
inefficient and causes many memory allocations.
This change makes the jpeg encoder directly read Y, Cb, and Cr
pixel values.
benchmark old ns/op new ns/op delta
BenchmarkEncodeYCbCr-4 43990846 24201148 -44.99%
benchmark old MB/s new MB/s speedup
BenchmarkEncodeYCbCr-4 20.95 38.08 1.82x
Fixes#18487
Change-Id: Iaf2ebc646997e3e1fffa5335f1b0d642e15bd453
Reviewed-on: https://go-review.googlesource.com/34773
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Nigel Tao <nigeltao@golang.org>
This reverts commit ed8c62b7fb.
Turns out it was needed in later commits.
Change-Id: I07a7bc2429976d8a5a89f915a11625c118b85500
Reviewed-on: https://go-review.googlesource.com/36113
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Whoever called toint() is expecting the {Mpint, Mpflt, Mpcplx} arg to
be converted to an integer expression, so it never makes sense to
report an error as "constant X truncated to real".
Fixes#11580
Change-Id: Iadcb105f0802358a7f77188c2b1e63fe80c5580c
Reviewed-on: https://go-review.googlesource.com/34638
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
A user application can now use os.Setenv("ZONEINFO", ..) becase the
value is no longer read on init of the time package.
Fixes#18619
Change-Id: Id8e303d67e6fb9c5d6ea9f969d8c94f6fff1bee3
Reviewed-on: https://go-review.googlesource.com/35639
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As per RFC 2046, the boundary for multipart MIME is allowed up to 70
characters. The old SetBoundary implementation only allowed up to 69 so
this bumps it to the correct value of 70.
The relevant RFC is at https://www.ietf.org/rfc/rfc2046.txt and section
5.1.1 defines the boundary specification.
Fixes#18793
Change-Id: I91d2ed4549c3d27d6049cb473bac680a750fb520
Reviewed-on: https://go-review.googlesource.com/35830
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Many non-inlineable functions were not being
reported in '-m -m' mode.
Updates #17858.
Change-Id: I7d96361b39dd317f5550e57334a8a6dd1a836598
Reviewed-on: https://go-review.googlesource.com/32971
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
generic.rules wasn't updated when rewritegeneric.go was. This commit
updates it so that the rewritegeneric.go file can be regenerated.
Fixes#18885.
Change-Id: Ie7dab653ca0a9ea1c255fd12e311a0d9e66afdd2
Reviewed-on: https://go-review.googlesource.com/36032
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
By grouping all the logic into constDecl, we're able to get rid of the
lastconst and lasttype globals, and simplify the logic slightly. Still
clunky, but much easier to reason about.
Change-Id: I446696c31084b3bfc1fd5d3651655a81ddd159ab
Reviewed-on: https://go-review.googlesource.com/36023
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Algorithmic improvements here are hard.
Lifting a lookup out of the loop helps a little, though.
To compile the code in #17926:
name old s/op new s/op delta
Real 146 ± 3% 140 ± 4% -3.87% (p=0.002 n=10+10)
User 143 ± 3% 139 ± 4% -3.08% (p=0.005 n=10+10)
Sys 8.28 ±35% 8.08 ±28% ~ (p=0.684 n=10+10)
Updates #17926.
Change-Id: Ic255ac8b7b409c1a53791058818b7e2cf574abe3
Reviewed-on: https://go-review.googlesource.com/33305
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Also adds tests for all missing VRI-a instructions (which may be
affected by this change).
Fixes#18749.
Change-Id: I48249dda626f32555da9ab58659e2e140de6504a
Reviewed-on: https://go-review.googlesource.com/35561
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Prior to this change it was possible to see interleaved messages:
<<<
=== RUN Test/LongLongLongLongName48
=== RUN Test/LongLon=== RUN Test/LongLongLongLongName50
gLongLongName49
=== RUN Test/LongLongLongLongName51
>>>
This change fixes it such that you see:
<<<
=== RUN Test/LongLongLongLongName48
=== RUN Test/LongLongLongLongName49
=== RUN Test/LongLongLongLongName50
=== RUN Test/LongLongLongLongName51
>>>
Fixes#18741
Change-Id: I2529d724065dc65b3e9eb3d7cbeeda82a2d0cfd4
Reviewed-on: https://go-review.googlesource.com/35556
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Make the documentation more explicit that it is not safe to directly
compare Value. Get straight to the point on how to do it correctly.
Updates #18871
Change-Id: I2aa3253f779636b2f72a1aae8c9bb45d3c32c902
Reviewed-on: https://go-review.googlesource.com/36018
Reviewed-by: Keith Randall <khr@golang.org>
For #18130.
f8b4123613 [dev.typealias] spec: use term 'embedded field' rather than 'anonymous field'
9ecc3ee252 [dev.typealias] cmd/compile: avoid false positive cycles from type aliases
49b7af8a30 [dev.typealias] reflect: add test for type aliases
9bbb07ddec [dev.typealias] cmd/compile, reflect: fix struct field names for embedded byte, rune
43c7094386 [dev.typealias] reflect: fix StructOf use of StructField to match StructField docs
9657e0b077 [dev.typealias] cmd/doc: update for type alias
de2e5459ae [dev.typealias] cmd/compile: declare methods after resolving receiver type
9259f3073a [dev.typealias] test: match gccgo error messages on alias2.go
5d92916770 [dev.typealias] cmd/compile: change Func.Shortname to *Sym
a7c884efc1 [dev.typealias] go/internal/gccgoimporter: support for type aliases
5802cfd900 [dev.typealias] cmd/compile: export/import test cases for type aliases
d7cabd40dd [dev.typealias] go/types: clarified doc string
cc2dcce3d7 [dev.typealias] cmd/compile: a few better comments related to alias types
5c160b28ba [dev.typealias] cmd/compile: improved error message for cyles involving type aliases
b2386dffa1 [dev.typealias] cmd/compile: type-check type alias declarations
ac8421f9a5 [dev.typealias] cmd/compile: various minor cleanups
f011e0c6c3 [dev.typealias] cmd/compile, go/types, go/importer: various alias related fixes
49de5f0351 [dev.typealias] cmd/compile, go/importer: define export format and implement importing of type aliases
5ceec42dc0 [dev.typealias] go/types: export TypeName.IsAlias so clients can use it
aa1f0681bc [dev.typealias] go/types: improved Object printing
c80748e389 [dev.typealias] go/types: remove some more vestiges of prior alias implementation
80d8b69e95 [dev.typealias] go/types: implement type aliases
a917097b5e [dev.typealias] go/build: add go1.9 build tag
3e11940437 [dev.typealias] cmd/compile: recognize type aliases but complain for now (not yet supported)
e0a05c274a [dev.typealias] cmd/gofmt: added test cases for alias type declarations
2e5116bd99 [dev.typealias] go/ast, go/parser, go/printer, go/types: initial type alias support
Change-Id: Ia65f2e011fd7195f18e1dce67d4d49b80a261203
The test.bash script in misc/cgo/testsanitizers use GOOS, not GOHOSTOS.
Fix the dist check from gohostos to goos accordingly.
The error was masked on the builders because they run on a darwin host
where the sanitizers tests never ran.
With this change, the Android test suite completes successfully on
Android/amd64.
Change-Id: Id7690429f78c6ac7a26fc9118d913b719b565bb2
Reviewed-on: https://go-review.googlesource.com/35959
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This avoids errors like
./traceback.go:80:2: call of non-function C.f1
I filed https://gcc.gnu.org/PR79289 for the GCC problem. I think this
is a bug in GCC, and it may be fixed before the final GCC 7 release.
This CL is correct either way.
Fixes#18855.
Change-Id: I0785a7b7c5b1d0ca87b454b5eca9079f390fcbd4
Reviewed-on: https://go-review.googlesource.com/35919
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Fixes (skips) the test on Android, where stdout/stderr are not
terminals.
Updates #18153
Change-Id: Ieca65150362a5c423747ad751e00f76f0b890746
Reviewed-on: https://go-review.googlesource.com/35957
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Author of CL 35150 forgot to run mkalldocs.sh to update
the autogenerated alldocs.go
Change-Id: Ib824562db6044702456a221a8c6f9af412927a98
Reviewed-on: https://go-review.googlesource.com/35952
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This unwinds a small part of CL 31668: we now accept "./." in cleanImport.
Fixes#18778.
Change-Id: Ia7f1fde1cafcea3cc9e0b597a95a0e0bb410a3ed
Reviewed-on: https://go-review.googlesource.com/35646
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Previously the following could happen, though in practice it would
be rare.
Goroutine 1:
(*Tx).QueryContext begins a query, passing in userContext
Goroutine 2:
(*Tx).awaitDone starts to wait on the context derived from the passed in context
Goroutine 1:
(*Tx).grabConn returns a valid (*driverConn)
The (*driverConn) passes to (*DB).queryConn
Goroutine 3:
userContext is canceled
Goroutine 2:
(*Tx).awaitDone unblocks and calls (*Tx).rollback
(*driverConn).finalClose obtains dc.Mutex
(*driverConn).finalClose sets dc.ci = nil
Goroutine 1:
(*DB).queryConn obtains dc.Mutex in withLock
ctxDriverPrepare accepts dc.ci which is now nil
ctxCriverPrepare panics on the nil ci
The fix for this is to guard the Tx methods with a RWLock
holding it exclusivly when closing the Tx and holding a read lock
when executing a query.
Fixes#18719
Change-Id: I37aa02c37083c9793dabd28f7f934a1c5cbc05ea
Reviewed-on: https://go-review.googlesource.com/35550
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This fix is less pervasive than it seems. The only change affecting
formatting is on printer.go:760. The remaining changes have no effect
on formatting since the value of p.level is ignored except on this
specific line.
The remaining changes are:
- renamed adjBlock to funcBody since that's how it is used
- introduced new printer field 'level' tracking the composite
literal nesting level
- update/restore the composite literal nesting level as needed
Fixes#18782.
Change-Id: Ie833a9b5a559c4ec0f2eef2c5dc97aa263dca53a
Reviewed-on: https://go-review.googlesource.com/35811
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Modules appear in the moduledata linked list in the order they are
loaded by the dynamic loader, with one exception: the
firstmoduledata itself the module that contains the runtime.
This is not always the first module (when using -buildmode=shared,
it is typically libstd.so, the second module).
The order matters for typelinksinit, so we swap the first module
with whatever module contains the main function.
Updates #18729
This fixes the test case extracted with -linkshared, and now
go test -linkshared encoding/...
passes. However the original issue about a plugin failure is not
yet fixed.
Change-Id: I9f399ecc3518e22e6b0a350358e90b0baa44ac96
Reviewed-on: https://go-review.googlesource.com/35644
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Slower builders were failing TestQueryContext because the cancel
and return to conn pool happens async. TestQueryContext already
uses a wait method for this reason. Use the same method for
other context tests.
Fixes#18759
Change-Id: I84cce697392b867e4ebdfadd38027a06ca14655f
Reviewed-on: https://go-review.googlesource.com/35750
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For #18130.
Change-Id: Idd77cb391178c185227cfd779c70fec16351f825
Reviewed-on: https://go-review.googlesource.com/35733
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Will also fix type aliases.
Fixes#17766.
For #18130.
Change-Id: I9e1584d47128782152e06abd0a30ef423d5c30d2
Reviewed-on: https://go-review.googlesource.com/35732
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The runtime internal structField interprets name=="" as meaning anonymous,
but the exported reflect.StructField has always set Name, even for anonymous
fields, and also set Anonymous=true.
The initial implementation of StructOf confused the internal and public
meanings of the StructField, expecting the runtime representation of
anonymous fields instead of the exported reflect API representation.
It also did not document this fact, so that users had no way to know how
to create an anonymous field.
This CL changes StructOf to use the previously documented interpretation
of reflect.StructField instead of an undocumented one.
The implementation of StructOf also, in some cases, allowed creating
structs with unexported fields (if you knew how to ask) but set the
PkgPath incorrectly on those fields. Rather than try to fix that, this CL
changes StructOf to reject attempts to create unexported fields.
(I think that may be the right design choice, not just a temporary limitation.
In any event, it's not the topic for today's work.)
For #17766.
Fixes#18780.
Change-Id: I585a4e324dc5a90551f49d21ae04d2de9ea04b6c
Reviewed-on: https://go-review.googlesource.com/35731
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
