The GC info masks for slices and strings were changed in
commit caab29a25f68, but the reference masks used by
gcinfo_test for power64x hadn't caught up. Now they're
identical to amd64, so this CL fixes this test by combining
the reference masks for these platforms.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/162620044
reflect/asm_power64x.s was missing changes made to other
platforms for stack maps. This CL ports those changes. With
this fix, the reflect test passes on power64x.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/170870043
fastrand1 depends on testing the high bit of its uint32 state.
For efficiency, all of the architectures implement this as a
sign bit test. However, on power64, fastrand1 was using a
64-bit sign test on the zero-extended 32-bit state. This
always failed, causing fastrand1 to have very short periods
and often decay to 0 and get stuck.
Fix this by using a 32-bit signed compare instead of a 64-bit
compare. This fixes various tests for the randomization of
select of map iteration.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/166990043
All three cases of clearfat were wrong on power64x.
The cases that handle 1032 bytes and up and 32 bytes and up
both use MOVDU (one directly generated in a loop and the other
via duffzero), which leaves the pointer register pointing at
the *last written* address. The generated code was not
accounting for this, so the byte fill loop was re-zeroing the
last zeroed dword, rather than the bytes following the last
zeroed dword. Fix this by simply adding an additional 8 byte
offset to the byte zeroing loop.
The case that handled under 32 bytes was also wrong. It
didn't update the pointer register at all, so the byte zeroing
loop was simply re-zeroing the beginning of region. Again,
the fix is to add an offset to the byte zeroing loop to
account for this.
LGTM=dave, bradfitz
R=rsc, dave, bradfitz
CC=golang-codereviews
https://golang.org/cl/168870043
Apparently I had already moved on to fixing another problem
when I submitted CL 169790043.
LGTM=dave
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/165210043
No real problems found. Just lots of argument names that
didn't quite match up.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/169790043
This adds a test to runtime·check to ensure CAS of large
unsigned 32-bit numbers does not accidentally sign-extend its
arguments.
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/162490044
Previously, the power64x runtime assembly was sloppy about
using sign-extending versus zero-extending moves of arguments
and return values. I think all of the cases that actually
mattered have been fixed in recent CLs; this CL fixes up the
few remaining mismatches.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/162480043
goprintf is a printf-like print for Go.
It is used in the code generated by 'defer print(...)' and 'go print(...)'.
Normally print(1, 2, 3) turns into
printint(1)
printint(2)
printint(3)
but defer and go need a single function call to give the runtime;
they give the runtime something like goprintf("%d%d%d", 1, 2, 3).
Variadic functions like goprintf cannot be described in the new
type information world, so we have to replace it.
Replace with a custom function, so that defer print(1, 2, 3) turns
into
defer func(a1, a2, a3 int) {
print(a1, a2, a3)
}(1, 2, 3)
(and then the print becomes three different printints as usual).
Fixes#8614.
LGTM=austin
R=austin
CC=golang-codereviews, r
https://golang.org/cl/159700043
I removed support for jumping between functions years ago,
as part of doing the instruction layout for each function separately.
Given that, it makes sense to treat labels as function-scoped.
This lets each function have its own 'loop' label, for example.
Makes the assembly much cleaner and removes the last
reason anyone would reach for the 123(PC) form instead.
Note that this is on the dev.power64 branch, but it changes all
the assemblers. The change will ship in Go 1.5 (perhaps after
being ported into the new assembler).
Came up as part of CL 167730043.
LGTM=r
R=r
CC=austin, dave, golang-codereviews, minux
https://golang.org/cl/159670043
In CL 160670043 the write function was changed
so a zero-length write is now allowed. This leads
the ExampleWriter_Init test to fail.
The reason is that Plan 9 preserves message
boundaries, while the os library expects systems
that don't preserve them. We have to ignore
zero-length writes so they will never turn into EOF.
This issue was previously discussed in CL 7406046.
LGTM=bradfitz
R=rsc, bradfitz
CC=golang-codereviews
https://golang.org/cl/163510043
Power64 servers do not currently support sub-word size atomic
memory access, so atomicor8 uses word size atomic access.
However, previously atomicor8 made no attempt to align this
access, resulting in errors. Fix this by aligning the pointer
to a word boundary and shifting the value appropriately.
Since atomicor8 is used in GC, add a test to runtime·check to
make sure this doesn't break in the future.
This also fixes an incorrect branch label, an incorrectly
sized argument move, and adds argument names to help go vet.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/165820043
The "to" field was the penultimate argument to outgcode,
instead of the last argument, which swapped the third and
fourth operands. The argument order was correct in a.y, so
just swap the meaning of the arguments in outgcode. This
hadn't come up because we hadn't used these more obscure
operations in any hand-written assembly until now.
LGTM=rsc, dave
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/160690043
No easy way to test (would have to actually trigger some routing
events from kernel) but the code is clearly wrong as written.
If the header says there is a submessage, we need to at least
skip over its bytes, not just continue to the next iteration.
Fixes#8203.
LGTM=r
R=r
CC=golang-codereviews, mikioh.mikioh, p
https://golang.org/cl/164140044
get -u now checks that remote repo paths match the
ones predicted by the import paths: if you are get -u'ing
rsc.io/pdf, it has to be checked out from the right location.
This is important in case the rsc.io/pdf redirect changes.
In some cases, people have good reasons to use
non-standard remote repos. Add -f flag to allow that.
The f can stand for force or fork, as you see fit.
Fixes#8850.
LGTM=r
R=r
CC=golang-codereviews
https://golang.org/cl/164120043
The wrapper code was being emitted before the stack
reservation, rather than after.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/161540043
Just to confirm the fix, by typing the follwing:
go test -run=TestLookupIPDeadline -dnsflood or
go test -run=TestLookupIPDeadline -dnsflood -tags netgo
Update #8602
LGTM=iant
R=iant
CC=golang-codereviews
https://golang.org/cl/166740043
Add a short introductory section saying what most Go
programmers really need to know, which is that you
shouldn't have to read this document to understand
the behavior of your program.
LGTM=bradfitz, adg, tracey.brendan, iant, rsc, dsymonds
R=golang-codereviews, bradfitz, tracey.brendan, adg, iant, rsc, dsymonds
CC=golang-codereviews
https://golang.org/cl/158500043
Not a language change.
This is simply documenting the status quo which permits
builtin function names to be parenthesized in calls; e.g.,
both
len(s)
and
(((len)))(s)
are accepted by all compilers and go/types.
Changed the grammar by merging the details of BuiltinCall
with ordinary Calls. Also renamed the Call production to
Arguments which more clearly identifies that part of the
grammar and also matches better with its counterpart on
the declaration side (Parameters).
The fact that the first argument can be a type (for builtins)
or cannot be a type (for regular function calls) is expressed
in the prose, no need to make the grammar more complicated.
Fixes#9001.
LGTM=iant, r, rsc
R=r, rsc, iant, ken, dave
CC=golang-codereviews
https://golang.org/cl/160570043
The test just doubled a certain number of times
and then gave up. On a mostly fast but occasionally
slow machine this may never make the test run
long enough to see the linear growth.
Change test to keep doubling until the first round
takes at least a full second, to reduce the effect of
occasional scheduling or other jitter.
The failure we saw had a time for the first round
of around 100ms.
Note that this test still passes once it sees a linear
effect, even with a very small total time.
The timeout here only applies to how long the execution
must be to support a reported failure.
LGTM=khr
R=khr
CC=golang-codereviews, rlh
https://golang.org/cl/164070043
Fix include paths that got moved in the great pkg/ rename. Add
missing runtime/arch_* files for power64. Port changes that
happened on default since branching to
runtime/{asm,atomic,sys_linux}_power64x.s (precise stacks,
calling convention change, various new and deleted functions.
Port struct renaming and fix some bugs in
runtime/defs_linux_power64.h.
LGTM=rsc
R=rsc, dave
CC=golang-codereviews
https://golang.org/cl/161450043
