created panic1.go just so diffs were available.
After this CL is in, I'd like to move panic.go -> defer.go
and panic1.go -> panic.go.
LGTM=rsc
R=rsc, khr
CC=golang-codereviews
https://golang.org/cl/133530045
sigprof and setcpuprofilerate coordinate the enabling/disabling
of the handler using a Mutex. This has always been a bit dodgy:
setcpuprofilerate must be careful to turn off signals before acquiring
the lock to avoid a deadlock.
Now the lock implementations use onM, and onM isn't okay on the
signal stack. We know how to make it okay, but it's more work than
is probably worth doing.
Since this is super-dodgy anyway, replace the lock with a simple
cas loop. It is only contended if setcpuprofilerate is being called,
and that doesn't happen frequently enough to care about the
raw speed or about using futexes/semaphores.
TBR to fix freebsd/amd64 and dragonfly/amd64 builds.
Happy to make changes in a follow-up CL.
TBR=dvyukov
CC=golang-codereviews
https://golang.org/cl/141080044
The general kernel system call interface
takes 6 arguments: R0, R1, R2, R3, R4, R5.
Syscall is for calls that only need 3.
The amd64 and 386 versions zero the extra arg registers,
but the arm version does not.
func utimensat calls Syscall with 3 arguments.
The kernel expects a 4th argument.
That turns out to be whatever is in R3 at the time of the call.
CL 137160043 changed various pieces of code and apparently
changed the value left in R3 at the time of utimensat's Syscall.
This causes the kernel to return EINVAL.
Change linux/arm Syscall to zero R3, R4, R5, so that calls will
behave deterministically, even if they pass too few arguments.
Arguably, utimensat could be fixed too, but the predictable
zeroing is certainly worth doing, and once done utimensat's
use of Syscall is fine.
Fixes arm build.
TBR=bradfitz
CC=golang-codereviews
https://golang.org/cl/141080043
I did this just to clean things up, but it will be important
when we drop the pkg directory later.
LGTM=bradfitz
R=r, bradfitz
CC=golang-codereviews
https://golang.org/cl/132600043
Behavior before this CL:
1. If onM is called on a g0 stack, it just calls the given function.
2. If onM is called on a gsignal stack, it calls badonm.
3. If onM is called on a curg stack, it switches to the g0 stack
and then calls the function.
In cases 1 and 2, if the program then crashes (and badonm always does),
we want to see what called onM, but the traceback stops at onM.
In case 3, the traceback must stop at onM, because the g0
stack we are renting really does stop at onM.
The current code stops the traceback at onM to handle 3,
at the cost of making 1 and 2 crash with incomplete traces.
Change traceback to scan past onM but in case 3 make it look
like on the rented g0 stack, onM was called from mstart.
The traceback already knows that mstart is a top-of-stack function.
Alternate fix at CL 132610043 but I think this one is cleaner.
This CL makes 3 the exception, while that CL makes 1 and 2 the exception.
Submitting TBR to try to get better stack traces out of the
freebsd/amd64 builder, but happy to make changes in a
followup CL.
TBR=khr
R=khr
CC=golang-codereviews
https://golang.org/cl/133620043
The old change worked fine in my client, but my client
must not have been in a completely clean state.
TBR=r
CC=golang-codereviews
https://golang.org/cl/138100043
1) cmd/dist was copying textflag.h to the build include directory,
but only after compiling package runtime. So other packages could
use it, just not runtime. Copy earlier, so that runtime can use it too.
2) We decided for android that anything marked linux is also included
in the build. The generated linux-specific files in cmd/dist must therefore
have explicit +build !android tags, or else you can't have simultaneous
linux/arm and android/arm builds in a single client. The tag was already
there for at least one file, but it was missing from many others.
LGTM=r
R=r
CC=golang-codereviews
https://golang.org/cl/134500043
sysAlloc is the only mem function called from Go.
LGTM=iant, khr
R=golang-codereviews, khr, 0intro, iant
CC=dvyukov, golang-codereviews, r
https://golang.org/cl/139210043
Mostly NOSPLIT additions.
Had to rewrite atomic_arm.c in Go because it calls lock,
and lock is too complex.
With this CL, I find no Go -> C calls that can split the stack
on any system except Solaris and Windows.
Solaris and Windows need more work and will be done separately.
LGTM=iant, dave
R=golang-codereviews, bradfitz, iant, dave
CC=dvyukov, golang-codereviews, khr, r
https://golang.org/cl/137160043
The -nocgo builder failed because it has cgo disabled
as well as no USER environment variable:
http://build.golang.org/log/2250abb82f5022b72a12997b8ff89fcdeff094c9
# Checking API compatibility.
Error getting current user: user: Current not implemented on linux/amd64
exit status 1
Don't require the environment variable here.
LGTM=minux
R=dave, adg, minux
CC=golang-codereviews
https://golang.org/cl/140290043
Convert no-op race functions.
Everything else is tiny and gets NOSPLITs.
After this, all that is left on darwin is sysAlloc, panic, and gothrow (all pending).
There may be system-specific calls in other builds.
LGTM=iant
R=golang-codereviews, iant
CC=dvyukov, golang-codereviews, khr, r
https://golang.org/cl/140240044
When this code was written, there was no way for Go to
reuse the C function and enum values. Now there is.
LGTM=bradfitz
R=rlh, bradfitz
CC=dvyukov, golang-codereviews, iant, khr, r
https://golang.org/cl/139150045
The original conversion in CL 132090043 cut up
the function in an attempt to avoid converting most
of the code to Go. This contorts the control flow.
While debugging the onM signal stack bug,
I reconverted sigqueue.goc in its entirety.
This restores the original control flow, which is
much easier to understand.
The current conversion is correct, it's just complex
and will be hard to maintain. The new one is as
readable as the original code.
I uploaded sigqueue.goc as the initial copy of
sigqueue.go in the CL, so if you view the diffs
of sigqueue.go comparing against patch set 2 [sic]
it will show the actual starting point.
For example:
https://golang.org/cl/136160043/diff2/20001:60001/src/pkg/runtime/sigqueue.go
LGTM=dvyukov, iant
R=golang-codereviews, dvyukov, iant
CC=golang-codereviews, khr, r
https://golang.org/cl/136160043
The common code is converted, epoll and kqueue are converted.
Windows and solaris are still C.
LGTM=rsc
R=golang-codereviews, rsc, dave
CC=golang-codereviews, iant, khr, rsc
https://golang.org/cl/132910043
I had this right in one of my clients, but apparently not the one I submitted from.
Fixes 386 builds.
TBR=dfc
CC=golang-codereviews
https://golang.org/cl/138000045
The arm5 build breakage at CL 139110043 was caused by
calling funcPC on a lessstack defined as a struct{}.
That symbol ended up with a non-4-aligned address,
which caused the memory fault that broke the builders.
The definition of lessstack was fixed in CL 140880043.
Tracking that down suggested that it would be worth
looking for the same bug elsewhere in the directory.
This is the only one I found.
LGTM=bradfitz
R=golang-codereviews, dave, bradfitz
CC=dvyukov, golang-codereviews, iant, khr, r
https://golang.org/cl/134410043
Some things get converted.
Other things (too complex or too many C deps) get onM calls.
Other things (too simple) get #pragma textflag NOSPLIT.
After this CL, the offending function list is basically:
- panic.c
- netpoll.goc
- mem*.c
- race stuff
- readgstatus
- entersyscall/exitsyscall
LGTM=r, iant
R=golang-codereviews, r, iant
CC=dvyukov, golang-codereviews, khr
https://golang.org/cl/140930043
The implementation and use patterns of onM assume
that they run on either the m->curg or m->g0 stack.
Calling onM from m->gsignal has two problems:
(1) When not on g0, onM switches to g0 and then "back" to curg.
If we didn't start at curg, bad things happen.
(2) The use of scalararg/ptrarg to pass C arguments and results
assumes that there is only one onM call at a time.
If a gsignal starts running, it may have interrupted the
setup/teardown of the args for an onM on the curg or g0 stack.
Using scalararg/ptrarg itself would smash those.
We can fix (1) by remembering what g was running before the switch.
We can fix (2) by requiring that uses of onM that might happen
on a signal handling stack must save the old scalararg/ptrarg
and restore them after the call, instead of zeroing them.
The only sane way to do this is to introduce a separate
onM_signalsafe that omits the signal check, and then if you
see a call to onM_signalsafe you know the surrounding code
must preserve the old scalararg/ptrarg values.
(The implementation would be that onM_signalsafe just calls
fn if on the signal stack or else jumps to onM. It's not necessary
to have two whole copies of the function.)
(2) is not a problem if the caller and callee are both Go and
a closure is used instead of the scalararg/ptrarg slots.
For now, I think we can avoid calling onM from code executing
on gsignal stacks, so just reject it.
In the long term, (2) goes away (as do the scalararg/ptrarg slots)
once everything is in Go, and at that point fixing (1) would be
trivial and maybe worth doing just for regularity.
LGTM=iant
R=golang-codereviews, iant
CC=dvyukov, golang-codereviews, khr, r
https://golang.org/cl/135400043
Instead of making asmcgocall call asmcgocall_errno,
make both load args into registers and call a shared
assembly function.
On amd64, this costs 1 word in the asmcgocall_errno path
but saves 3 words in the asmcgocall path, and the latter
is what happens on critical nosplit paths on Windows.
On arm, this fixes build failures: asmcgocall was writing
the arguments for asmcgocall_errno into the wrong
place on the stack. Passing them in registers avoids the
decision entirely.
On 386, this isn't really needed, since the nosplit paths
have twice as many words to work with, but do it for consistency.
Update #8635
Fixes arm build (except GOARM=5).
TBR=iant
CC=golang-codereviews
https://golang.org/cl/134390043
I really hoped we could avoid this nonsense, but it appears not.
Should fix windows/amd64 build breakage.
TBR=iant
CC=golang-codereviews
https://golang.org/cl/137120043
This CL fixes a bug introduced by CL 128820043 which is that
builtin dns stub resolver doesn't work well with literal IPv6
address namesever entries in /etc/resolv.conf.
Also simplifies resolv.conf parser and adds more test cases.
LGTM=iant
R=golang-codereviews, bradfitz, iant
CC=golang-codereviews
https://golang.org/cl/140040043
The discriminator in the execution engine was stupid.
Add a test to the parse package too. The problem wasn't there
but the particular case ('e' in a hex integer) was not covered.
Fixes#8622.
LGTM=ruiu
R=golang-codereviews, ruiu
CC=golang-codereviews
https://golang.org/cl/133530043
It is fundamentally unsafe to grow the stack once someone
has made a call to syscall.Syscall. That function takes 6 uintptr
arguments, but depending on the call some are pointers.
In fact, some might be pointers to stack values, and we don't know which.
That makes it impossible to copy the stack somewhere else.
Since we want to delete all the stack splitting code, relying only
on stack copying, make sure that Syscall never needs to split the stack.
The only thing Syscall does is:
call entersyscall
make the system call
call exitsyscall
As long as we make sure that entersyscall and exitsyscall
can live in the nosplit region, they won't ask for more stack.
Do this by making entersyscall and exitsyscall set up the
stack guard so that any call to a function with a split check
will cause a crash. Then move non-essential slow-path
work onto the m stack using onM and mark the rest of the
work nosplit. The linker will verify that the chain of nosplits
fits in the total nosplit budget.
LGTM=iant
R=golang-codereviews, iant
CC=dvyukov, golang-codereviews, khr, r
https://golang.org/cl/140950043
Because symtab.c was partially converted before,
the diffs are not terribly useful.
The earlier conversion was trying to refactor or
clean up the code in addition to doing the translation.
It also made a mistake by redefining Func to be something
users could overwrite.
I undid those changes, making symtab.go a more
literal line-for-line translation of symtab.c instead.
LGTM=josharian
R=golang-codereviews, dave, bradfitz, josharian
CC=golang-codereviews, iant, khr, r
https://golang.org/cl/140880043
We often saw GC pauses of 0 ns, not just on Windows.
Google Compute Engine timer granularity might suck
too.
LGTM=rsc
R=rsc, dvyukov
CC=golang-codereviews
https://golang.org/cl/140910043
The race was in the old C code.
The new Go code does not have the race
and does not need the check.
LGTM=bradfitz, dvyukov
R=golang-codereviews, bradfitz, dvyukov
CC=golang-codereviews, rlh
https://golang.org/cl/140180043
Ignore memory access on g0/gsignal.
See the issue for context and explanation.
Fixes#8627.
LGTM=khr
R=golang-codereviews, mdempsky, khr
CC=golang-codereviews, rsc
https://golang.org/cl/137070043
Code to bring goroutines to a gc safepoint one at a time,
do some work such as scanning, and restart the
goroutine, and then move on to the next goroutine.
Currently this code does not do much useful work
but this infrastructure will be critical to future
concurrent GC work.
Fixed comments reviewers.
LGTM=rsc
R=golang-codereviews, rsc, dvyukov
CC=golang-codereviews
https://golang.org/cl/131580043
This gives them correct types in Go and also makes it
possible to use them to run Go code on an m stack.
LGTM=iant
R=golang-codereviews, dave, iant
CC=dvyukov, golang-codereviews, khr, r
https://golang.org/cl/137970044
They were in proc.c mainly because there was no portable
traceback source file. As part of converting them to Go,
move to traceback.go.
In order to get access to the PC of _rt0_go,
rename to runtime.rt0_go.
LGTM=r
R=golang-codereviews, r
CC=dvyukov, golang-codereviews, iant, khr
https://golang.org/cl/139110043
If system is busy burning cpu, it takes long time (about 300ms on
windows builders) to adjust prof thread priority. Once adjusted, prof
thread runs ahead of everyone else, but due to initial slowness, it
does not capture prof snapshots until start-up period is completed.
Change prof thread priority sooner, so it can start captures straight
away.
LGTM=dvyukov
R=golang-codereviews, dvyukov
CC=golang-codereviews
https://golang.org/cl/134360043
While we are here, give the gc helper a real function name
that will appear in stack traces.
LGTM=rlh
R=rlh
CC=dvyukov, golang-codereviews
https://golang.org/cl/133470043
