Assign SSA OFOR's bBody.Pos to AST (*Node).Pos as it is created.
An empty for loop has no other information which may be used to give
correct position information in the resulting executable. Such a for
loop may compile to a single `JMP *self` and it is important that the
location of this is in the right place.
Fixes#30167.
Change-Id: Iec44f0281c462c33fac6b7b8ccfc2ef37434c247
Reviewed-on: https://go-review.googlesource.com/c/go/+/163019
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Current compiler reverses operands to work around NaN in
"less than" and "less equal than" comparisons. But if we
want to use "FCMPD/FCMPS $(0.0), Fn" to do some optimization,
the workaround way does not work. Because assembler does
not support instruction "FCMPD/FCMPS Fn, $(0.0)".
This CL sets condition flags for floating-point comparisons
to resolve this problem.
Change-Id: Ia48076a1da95da64596d6e68304018cb301ebe33
Reviewed-on: https://go-review.googlesource.com/c/go/+/164718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
With math/big supporting the new octal prefixes directly,
the compiler doesn't have to manually convert such numbers
into old-style 0-prefix octals anymore.
Updates #12711.
Change-Id: I300bdd095836595426a1478d68da179f39e5531a
Reviewed-on: https://go-review.googlesource.com/c/go/+/165861
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL extends the various SetString and Parse methods for
Ints, Rats, and Floats to accept the new octal prefixes.
The main change is in natconv.go, all other changes are
documentation and test updates.
Finally, this CL also fixes TestRatSetString which silently
dropped certain failures.
Updates #12711.
Change-Id: I5ee5879e25013ba1e6eda93ff280915f25ab5d55
Reviewed-on: https://go-review.googlesource.com/c/go/+/165898
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Update the test in test/heapsampling.go to more thoroughly validate heap sampling.
Lower the sampling rate on the test to ensure allocations both smaller and
larger than the sampling rate are tested.
Tighten up the validation check to a 10% difference between the unsampled and correct value.
Because of the nature of random sampling, it is possible that the unsampled value fluctuates
over that range. To avoid flakes, run the experiment three times and only report an issue if the
same location consistently falls out of range on all experiments.
This tests the sampling fix in cl/158337.
Change-Id: I54a709e5c75827b8b1c2d87cdfb425ab09759677
GitHub-Last-Rev: 7c04f12603
GitHub-Pull-Request: golang/go#26944
Reviewed-on: https://go-review.googlesource.com/c/go/+/129117
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
net.TCPConn has the ability to send data out using system calls such as
sendfile when the source data comes from an *os.File. However, the way
that I/O has been laid out in the transport means that the File is
actually wrapped behind two outer io.Readers, and as such the TCP stack
cannot properly type-assert the reader, ensuring that it falls back to
genericReadFrom.
This commit does the following:
* Removes transferBodyReader and moves its functionality to a new
doBodyCopy helper. This is not an io.Reader implementation, but no
functionality is lost this way, and it allows us to unwrap one layer
from the body.
* The second layer of the body is unwrapped if the original reader
was wrapped with ioutil.NopCloser, which is what NewRequest wraps the
body in if it's not a ReadCloser on its own. The unwrap operation
passes through the existing body if there's no nopCloser.
Note that this depends on change https://golang.org/cl/163737 to
properly function, as the lack of ReaderFrom implementation otherwise
means that this functionality is essentially walled off.
Benchmarks between this commit and https://golang.org/cl/163862,
incorporating https://golang.org/cl/163737:
linux/amd64:
name old time/op new time/op delta
FileAndServer_1KB/NoTLS-4 53.2µs ± 0% 53.3µs ± 0% ~ (p=0.075 n=10+9)
FileAndServer_1KB/TLS-4 61.2µs ± 0% 60.7µs ± 0% -0.77% (p=0.000 n=10+9)
FileAndServer_16MB/NoTLS-4 25.3ms ± 5% 3.8ms ± 6% -84.95% (p=0.000 n=10+10)
FileAndServer_16MB/TLS-4 33.2ms ± 2% 13.4ms ± 2% -59.57% (p=0.000 n=10+10)
FileAndServer_64MB/NoTLS-4 106ms ± 4% 16ms ± 2% -84.45% (p=0.000 n=10+10)
FileAndServer_64MB/TLS-4 129ms ± 1% 54ms ± 3% -58.32% (p=0.000 n=8+10)
name old speed new speed delta
FileAndServer_1KB/NoTLS-4 19.2MB/s ± 0% 19.2MB/s ± 0% ~ (p=0.095 n=10+9)
FileAndServer_1KB/TLS-4 16.7MB/s ± 0% 16.9MB/s ± 0% +0.78% (p=0.000 n=10+9)
FileAndServer_16MB/NoTLS-4 664MB/s ± 5% 4415MB/s ± 6% +565.27% (p=0.000 n=10+10)
FileAndServer_16MB/TLS-4 505MB/s ± 2% 1250MB/s ± 2% +147.32% (p=0.000 n=10+10)
FileAndServer_64MB/NoTLS-4 636MB/s ± 4% 4090MB/s ± 2% +542.81% (p=0.000 n=10+10)
FileAndServer_64MB/TLS-4 522MB/s ± 1% 1251MB/s ± 3% +139.95% (p=0.000 n=8+10)
darwin/amd64:
name old time/op new time/op delta
FileAndServer_1KB/NoTLS-8 93.0µs ± 5% 96.6µs ±11% ~ (p=0.190 n=10+10)
FileAndServer_1KB/TLS-8 105µs ± 7% 100µs ± 5% -5.14% (p=0.002 n=10+9)
FileAndServer_16MB/NoTLS-8 87.5ms ±19% 10.0ms ± 6% -88.57% (p=0.000 n=10+10)
FileAndServer_16MB/TLS-8 52.7ms ±11% 17.4ms ± 5% -66.92% (p=0.000 n=10+10)
FileAndServer_64MB/NoTLS-8 363ms ±54% 39ms ± 7% -89.24% (p=0.000 n=10+10)
FileAndServer_64MB/TLS-8 209ms ±13% 73ms ± 5% -65.37% (p=0.000 n=9+10)
name old speed new speed delta
FileAndServer_1KB/NoTLS-8 11.0MB/s ± 5% 10.6MB/s ±10% ~ (p=0.184 n=10+10)
FileAndServer_1KB/TLS-8 9.75MB/s ± 7% 10.27MB/s ± 5% +5.26% (p=0.003 n=10+9)
FileAndServer_16MB/NoTLS-8 194MB/s ±16% 1680MB/s ± 6% +767.83% (p=0.000 n=10+10)
FileAndServer_16MB/TLS-8 319MB/s ±10% 963MB/s ± 4% +201.36% (p=0.000 n=10+10)
FileAndServer_64MB/NoTLS-8 180MB/s ±31% 1719MB/s ± 7% +853.61% (p=0.000 n=9+10)
FileAndServer_64MB/TLS-8 321MB/s ±12% 926MB/s ± 5% +188.24% (p=0.000 n=9+10)
Updates #30377.
Change-Id: I631a73cea75371dfbb418c9cd487c4aa35e73fcd
GitHub-Last-Rev: 4a77dd1b80
GitHub-Pull-Request: golang/go#30378
Reviewed-on: https://go-review.googlesource.com/c/go/+/163599
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Currently only CPU profile utilizes tag information.
This change documents that fact
Updates #23458
Change-Id: Ic893e85f63af0da9100d8cba7d3328c294e8c810
GitHub-Last-Rev: be99a12629
GitHub-Pull-Request: golang/go#27198
Reviewed-on: https://go-review.googlesource.com/c/go/+/131275
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This CL adds two rules to turn patterns like ((x<<8) | (x>>8)) (the type of
x is uint16, "|" can also be "+" or "^") to a REV16 instruction on arm v6+.
This optimization rule can be used for math/bits.ReverseBytes16.
Benchmarks on arm v6:
name old time/op new time/op delta
ReverseBytes-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes16-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes32-32 1.29ns ± 0% 1.29ns ± 0% ~ (all equal)
ReverseBytes64-32 1.43ns ± 0% 1.43ns ± 0% ~ (all equal)
Change-Id: I819e633c9a9d308f8e476fb0c82d73fb73dd019f
Reviewed-on: https://go-review.googlesource.com/c/go/+/159019
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make persistConnWriter implement io.ReaderFrom, via an io.Copy on the
underlying net.Conn. This in turn enables it to use OS level
optimizations such as sendfile.
This has been observed giving performance gains even in the absence
of ReaderFrom, more than likely due to the difference in io's default
buffer (32 KB) versus bufio's (4 KB).
Speedups on linux/amd64:
benchmark old MB/s new MB/s speedup
BenchmarkFileAndServer_16MB/NoTLS-4 662.96 2703.74 4.08x
BenchmarkFileAndServer_16MB/TLS-4 552.76 1420.72 2.57x
Speedups on darwin/amd64:
benchmark old MB/s new MB/s speedup
BenchmarkFileAndServer_16MB/NoTLS-8 357.58 1972.86 5.52x
BenchmarkFileAndServer_16MB/TLS-8 346.20 1067.41 3.08x
Updates #30377.
Change-Id: Ic88d4ac254f665223536fcba4d551fc32ae105b6
GitHub-Last-Rev: a6f67cda2e
GitHub-Pull-Request: golang/go#30390
Reviewed-on: https://go-review.googlesource.com/c/go/+/163737
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This CL removes runtime code working around missing ARM processor capability
information in the auxiliary vector in older FreeBSD versions.
As announced in the Go 1.12 release notes Go 1.13 will require FreeBSD 11.2+
or FreeBSD 12.0+. These FreeBSD versions support CPU capability detection
through AT_HWCAP and AT_HWCAP2 values stored in the auxiliary vector.
Updates #27619
Change-Id: I2a457b578d35101a7a5fd56ae9b81b300ad17da4
Reviewed-on: https://go-review.googlesource.com/c/go/+/165799
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Yuval Pavel Zholkover <paulzhol@gmail.com>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A recent edit broke the flow; add a paragraph break when the subject
switches from maps to structs.
No changes in wording.
Change-Id: I5df88ec36b9d81931cfdbc684424440d01ac06d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/165917
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As an experiment to better understand the impact of
having an authoritative source of truth for module hashes
before the real notary is available, this CL adds the basic
notary authorization checks using a partial whitelist of
known go.sum values for popular modules.
In addition to the temporary whitelist, this CL adds code
implementing $GONOVERIFY, a new 'go help modules-auth',
and clearer error messages for verification mismatches.
See #25530 for notary proposal.
Filed #30601 to remove whitelist when notary lands.
Change-Id: Ibcb6ac39c5e60455edf003d8c20af6932aeb7e88
Reviewed-on: https://go-review.googlesource.com/c/go/+/165380
Reviewed-by: Bryan C. Mills <bcmills@google.com>
First the insidious bug:
var n uintptr
for n := elemPtrs; n > 120; n -= 120 {
prog = append(prog, 120)
prog = append(prog, mask[:15]...)
mask = mask[15:]
}
prog = append(prog, byte(n))
prog = append(prog, mask[:(n+7)/8]...)
The := breaks this code, because the n after the loop is always 0!
We also do need to handle field padding correctly. In particular
the old padding code doesn't correctly handle fields that are not
a multiple of a pointer in size.
Fixes#30606.
Change-Id: Ifcab9494dc25c20116753c5d7e0145d6c2053ed8
Reviewed-on: https://go-review.googlesource.com/c/go/+/165860
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds a Val accessor that returns the underlying type for a
given constant.Value. This change also adds a Make constructor that builds a
constant.Value given a value of a specific type.
Fixes#29820
Change-Id: I4fc3f5221408e24af42ffecd21ce4099ee75b47a
Reviewed-on: https://go-review.googlesource.com/c/go/+/164538
Reviewed-by: Robert Griesemer <gri@golang.org>
The contents of debug_pubnames and debug_pubtypes have been wrong since
Go 1.12.
CL golang.org/cl/137235 moved global variables DIE to their respective
compilation unit, unfortunately writepub can't emit correct sections
for anything but the first compilation unit.
This commit moves the code generating debug_pubnames and debug_pubtypes
inside writeinfo and fixes it.
Gets rid of a number of unnecessary relocations as well as a hack that
writeinfo used to communicate to writepub the size of each compilation
unit.
Fixes#30573
Change-Id: Ibdaa80c02746ae81661c2cfe1d218092c5ae9236
Reviewed-on: https://go-review.googlesource.com/c/go/+/165337
Run-TryBot: Alessandro Arzilli <alessandro.arzilli@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The 'go version' statement was added during Go 1.11 development in
CL 125940. That CL added the GoVersion field to modinfo.ModulePublic
struct, but did not document it in cmd/go documentation. This was
consistent with the CL description, which stated "We aren't planning
to use this or advertise it much yet".
CL 147281, applied during Go 1.12 development, was a change to start
adding the 'go version' statement when initializing go.mod. The 'go
version' statement is now being used, and it has been documented in
the Go 1.12 release notes at https://golang.org/doc/go1.12#modules.
It's now due time to documement the GoVersion field in cmd/go as well.
Keep the Error field bottom-most, both because it makes sense not to
place it in the middle of other fields, and for consistency with the
field order in struct Package, where the Error information is located
at the very bottom.
Regenerate alldocs.go by running mkalldocs.sh.
Updates #28221
Updates #23969
Change-Id: Iaf43a0da4f6a2489d861092a1d4e002a532952cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/164878
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Instead of trying to guess type of constants in the AST,
which is hard, use the "var cgo%d Type = Constant"
so that typechecking is left to the Go compiler.
The previous code could still fail in some cases
for constants imported from other modules
or defined in other, non-cgo files.
Fixes#30527
Change-Id: I2120cd90e90a74b9d765eeec53f6a3d2cfc1b642
Reviewed-on: https://go-review.googlesource.com/c/go/+/164897
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Otherwise, when the 'cmd' module is added the test will run as if in module 'cmd'.
While we're here, remove an unnecessary os.Chdir in TestAbsolutePath:
we can instead set the Dir on the 'go build' command instead. Then we
can run the tests in this file in parallel with everything else.
Updates #30228
Change-Id: I13ecd7ec93bc1041010daec14d76bac10e0c89be
Reviewed-on: https://go-review.googlesource.com/c/go/+/165744
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Test case for a panic/crash in gccgoimporter caused by incorrect gccgo
export data emission. Note that the *.gox file checked in contains the
correct export data; the main intent of the test is to make sure that
gccgo produces the right export data when run on the Go source.
Updates #30628
Change-Id: I29c0c17b81a43f92ff64fbfcdc58fdb46a5be370
Reviewed-on: https://go-review.googlesource.com/c/go/+/165739
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
They are missing a stop byte at the end.
Normally this doesn't matter, but when including a GC program
in another GC program, we strip the last byte. If that last byte
wasn't a stop byte, then we've thrown away part of the program
we actually need.
Fixes#30606
Change-Id: Ie9604beeb84f7f9442e77d31fe64c374ca132cce
Reviewed-on: https://go-review.googlesource.com/c/go/+/165857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When running cmd/vet/all on multiple builders, the coordinator places
a copy of golang.org/x/tools at a consistent revision in the builders'
GOPATHs. Keep using the consistent revision in module mode by
executing the build from a working directory within that repository.
When not running on a builder, use 'go vet' directly instead of
building an arbitrarily stale vet tool from the user's GOPATH.
Updates #30228
Change-Id: I19bc809247378da98f3e6ac8572f61bda4518143
Reviewed-on: https://go-review.googlesource.com/c/go/+/165740
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Make sure the side effects inside short-circuited operations (&& and ||)
happen correctly.
Before this CL, we attached the side effects to the node itself using
exprInPlace. That caused other side effects in sibling expressions
to get reordered with respect to the short circuit side effect.
Instead, rewrite a && b like:
r := a
if r {
r = b
}
That code we can keep correctly ordered with respect to other
side-effects extracted from part of a big expression.
exprInPlace seems generally unsafe. But this was the only case where
exprInPlace is called not at the top level of an expression, so I
don't think the other uses can actually trigger an issue (there can't
be a sibling expression). TODO: maybe those cases don't need "in
place", and we can retire that function generally.
This CL needed a small tweak to the SSA generation of OIF so that the
short circuit optimization still triggers. The short circuit optimization
looks for triangle but not diamonds, so don't bother allocating a block
if it will be empty.
Go 1 benchmarks are in the noise.
Fixes#30566
Change-Id: I19c04296bea63cbd6ad05f87a63b005029123610
Reviewed-on: https://go-review.googlesource.com/c/go/+/165617
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TestGoGetInsecure verifies that 'go get -insecure' can fetch a
particular package. However, the GOPROXY protocol does not provide a
means for proxies to indicate packages as insecure; thus, proxies
cannot safely serve those packages.
Updates #30571
Change-Id: I447776dff98bd8ee6eb5055b897b9c7d293e3423
Reviewed-on: https://go-review.googlesource.com/c/go/+/165745
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Relative imports do not work in module mode. Use a fully-qualified
import path instead.
Updates #30228
Change-Id: I0a42ffa521a7b513395e7e1788022d24cbb1f31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/165817
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
cmd/dist executes 'go test' within this directory, so it needs a
go.mod file to tell the compiler what package path to use in
diagnostic and debug information.
Updates #30228
Change-Id: Ia313ac06bc0ec4631d415faa20c56cce2ac8dbc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/165498
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds several arm64 v8.1 atomic instructions and test cases.
They are LDADDAx, LDADDLx, LDANDAx, LDANDALx, LDANDLx, LDEORAx, LDEORALx,
LDEORLx, LDORAx, LDORALx, LDORLx, SWPAx and SWPLx. Their form is consistent
with the form of the existing atomic instructions.
For instructions STXRx, STLXRx, STXPx and STLXPx, the second destination
register can't be RSP. This CL also adds a check for this.
LDADDx Rs, (Rb), Rt: *Rb -> Rt, Rs + *Rb -> *Rb
LDANDx Rs, (Rb), Rt: *Rb -> Rt, Rs AND NOT(*Rb) -> *Rb
LDEORx Rs, (Rb), Rt: *Rb -> Rt, Rs EOR *Rb -> *Rb
LDORx Rs, (Rb), Rt: *Rb -> Rt, Rs OR *Rb -> *Rb
Change-Id: I9f9b0245958cb57ab7d88c66fb9159b23b9017fd
Reviewed-on: https://go-review.googlesource.com/c/go/+/157001
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
fd.l.Lock shouldn't be called in a loop.
Change-Id: I3afbc184aa06a60175c9a39319985b5810ecb144
Reviewed-on: https://go-review.googlesource.com/c/go/+/165598
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before this change, if a directory was closed twice on Windows,
the returning error would be "use of closed network connection".
Some code assumes FD.isFile means whether the fd isn't a network
socket, which is true on Unix. But isFile reports whether
the fd is a normal file rather than directory or console on Windows.
With this change, isFile will have the same meaning on different
platforms. And the change adds a new field kind to replace isConsole
and isDir.
Change-Id: Ib12265f1e12fa3d0239ae925291128a84be59cc2
GitHub-Last-Rev: 3f031756de
GitHub-Pull-Request: golang/go#30589
Reviewed-on: https://go-review.googlesource.com/c/go/+/165257
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Moduledata symbols like runtime.data or runtime.text must have the
same position in the final executable (as some symbol accesses are made
by offset from them).
ld on AIX might move them randomly if there are nil size symbols.
ld will also remove unreachable symbols like runtime.epclntab or
runtime.rodata. In order to keep them, R_REF relocations are created
between firstmoduledata and these symbols. This relocation tells ld to
keep these symbols even if there aren't reachable.
Change-Id: Ie5a28cf406977131cec6442f7f5b6fd89fb775a3
Reviewed-on: https://go-review.googlesource.com/c/go/+/164004
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This commit adds external linking in cmd/link for aix/ppc64.
As relocations on .text data aren't possible on AIX, Segrelrodata is
used to move all these datas to .data section.
Change-Id: I4d1361c1fc9290e11e6f5560864460c76551dbeb
Reviewed-on: https://go-review.googlesource.com/c/go/+/164003
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Note that this particular combination of properties still fails (EPERM), but it
no longer hangs.
Updates #29789
Change-Id: I29b15b85a25a7acd7ae89ffc5fed074bcdfe0a12
Reviewed-on: https://go-review.googlesource.com/c/go/+/158297
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the input was "John Doe", we're definitely missing "<email>", as
"John Doe@domain" isn't a valid email address.
However, if the input was "john.doe", it's possible that the user meant
"john.doe@domain", and not just "john.doe <email>". Make it clear in the
error that either could be the source of the problem.
Fixes#27064.
Change-Id: I1b8f1342775d711823dffc3db974898ee62d3a34
Reviewed-on: https://go-review.googlesource.com/c/go/+/165517
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The change fixes the following deviations between the existing implementation and the Spec:
1. Using pattern instead of "mask" for assertion and iteration in the Pattern Matching Algorithm.
2. Rename "image/vnd.microsoft.icon" to "image/x-icon" and add another signature for the same.
3. Using named strings instead of hexadecimal representation in "application/zip" and "application/x-rar-compressed".
4. Reordering "sniffSignatures" in accordance with the Spec section "Identifying a resource with an unknown MIME type".
In addition to the above fixes, unit tests for Image MIME type group are added.
Fixes#30570
Change-Id: I97d2ae22b426c3c57bf8efd2ed9396c0be983688
Reviewed-on: https://go-review.googlesource.com/c/go/+/165277
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
While parsing inside a struct or an interface, skipping over empty lines
too to collect the next group of comments. We do not need to skip
over more than 1 empty line since gofmt already removes multiple
empty consecutive lines.
Fixes#10858
Change-Id: I0c97b65b5fc44e225e5dc7871ace24f43419ce08
Reviewed-on: https://go-review.googlesource.com/c/go/+/161177
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TestGdbAutotmpTypes takes more than one minute due to gdb performances.
Therefore, it must be skipped in short mode.
Change-Id: I253ebce62264cc7367c9b0f6ce9c5088a9994641
Reviewed-on: https://go-review.googlesource.com/c/go/+/164339
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#28558
Change-Id: I0ecd9c47fb017cf4bd44725a83a0016c7bb94633
Reviewed-on: https://go-review.googlesource.com/c/go/+/156478
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This commit add port of runtime/cgo for aix/ppc64.
AIX assembly is different from Linux assembly, therefore gcc_ppc64.S
must be redone for AIX.
Change-Id: I780ebab4ef9c4ce912f4c4d521d8c135b1eebf6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/164002
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This adds benchmarks to test file uploads using PUT requests.
It's designed to complement changes https://golang.org/cl/163599 and
https://golang.org/cl/163737, allowing an easy comparison of
performance before and after these changes are applied.
Updates #30377.
Co-authored-by: Emmanuel Odeke <emm.odeke@gmail.com>
Change-Id: Ib8e692c61e1f7957d88c7101669d4f7fb8110c65
GitHub-Last-Rev: 242622b4fc
GitHub-Pull-Request: golang/go#30424
Reviewed-on: https://go-review.googlesource.com/c/go/+/163862
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
And explain that it does this. A minor change probably worth mentioning,
although (#28782) I'd still like to freeze this document against any substantial
changes.
Fix#30568.
Change-Id: I74c56744871cfaf00dc52a9b480ca61d3ed19a6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/165597
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, lineWrapper does not detect if it is printing a line comment or not.
Hence, while wrapping a comment, the new line does not get prefixed with a //.
We add logic to lineWrapper to detect this case and add // accordingly. Block
comments do not need any such handling.
Added tests for both cases.
Fixes#20929
Change-Id: I656037c2d865f31dd853cf9195f43ab7c6e6fc53
Reviewed-on: https://go-review.googlesource.com/c/go/+/163578
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
