A typo was made, which I noticed while looking through the recent master
commits.
Change-Id: Ieed5d6664a1f3ff5892d59abf194963b44ef0e55
Reviewed-on: https://go-review.googlesource.com/c/go/+/280454
Trust: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change-Id: Idf8e5d808c0996e0ca00979e7b8d7627f29cd10f
Reviewed-on: https://go-review.googlesource.com/c/go/+/280552
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Fixes#42655
Change-Id: I7d2b70098a4ba4dcb325fb0be076043789b86135
Reviewed-on: https://go-review.googlesource.com/c/go/+/280312
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Elias Naur <mail@eliasnaur.com>
When time.Parse sees a timezone name that matches the local timezone,
it uses the local timezone. The tests weren't expecting that,
so using MDT broke with TZ=America/Boise (where MDT means Mountain
Daylight Time). Just use GMT instead.
Fixes#43354
Change-Id: Ida70c8c867e2568b1535d1dfbf1fb0ed9e0e5c1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/280072
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Today, timeHistogram, when copied, has the wrong set of counts for the
bucket that should represent (-inf, 0), when in fact it contains [0, 1).
In essence, the buckets are all shifted over by one from where they're
supposed to be.
But this also means that the existence of the overflow bucket is wrong:
the top bucket is supposed to extend to infinity, and what we're really
missing is an underflow bucket to represent the range (-inf, 0).
We could just always zero this bucket and continue ignoring negative
durations, but that likely isn't prudent.
timeHistogram is intended to be used with differences in nanotime, but
depending on how a platform is implemented (or due to a bug in that
platform) it's possible to get a negative duration without having done
anything wrong. We should just be resilient to that and be able to
detect it.
So this change removes the overflow bucket and replaces it with an
underflow bucket, and timeHistogram no longer panics when faced with a
negative duration.
Fixes#43328.
Fixes#43329.
Change-Id: If336425d7d080fd37bf071e18746800e22d38108
Reviewed-on: https://go-review.googlesource.com/c/go/+/279468
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Currently these two metrics are reported incorrectly, going by the
documentation in the runtime/metrics package. We just copy in the
size-class-based values from the runtime wholesale, but those implicitly
have an inclusive upper-bound and exclusive lower-bound (e.g. 48-byte
size class contains objects in the size range (32, 48]) but the API
declares inclusive lower-bounds and exclusive upper-bounds.
Also, the bottom bucket representing (-inf, 1) should always be empty.
Extend the consistency check to verify this.
Updates #43329.
Change-Id: I11b5b062a34e13405ab662d15334bda91f779775
Reviewed-on: https://go-review.googlesource.com/c/go/+/279467
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
A comment in mgcmark.go indicates that we scan stacks a second time but
we don't, at least not since changing to the hybrid write barrier.
Change-Id: I9376adbb6d8b6dd9dc3cee62e077b5dfb8a3fdde
Reviewed-on: https://go-review.googlesource.com/c/go/+/279797
Trust: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Changelog:
Volgograd switches to Moscow time on 2020-12-27 at 02:00.
Small changes to past timestamps and abbreviations.
See
http://mm.icann.org/pipermail/tz-announce/2020-December/000063.html
Updates #22487
Change-Id: I709abe899ca498698463e945ccbcf4bc5fe60b92
Reviewed-on: https://go-review.googlesource.com/c/go/+/279794
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A fix for a trivial (yet still confusing for neophytes like me!) typo in
contribute.html.
Change-Id: Ic68673fb2a3855c2b9e8042047087450e8793e6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/279452
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
'go get pkg@vers' will now add an explicit requirement for the module
providing pkg if that version was already indirectly required.
'go get mod@vers' will do the same if mod is a module path but not a
package.
Requirements promoted this way will be marked "// indirect" because
'go get' doesn't know whether they're needed to build packages in the
main module. So users should prefer to run 'go get ./pkg' (where ./pkg
is a package in the main module) to promote requirements.
Fixes#43131
Change-Id: Ifbb65b71274b3cc752a7a593d6ddd875f7de23b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/278812
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The syscall.AllThreadsSyscall() fixup mechanism needs to cooperate
with signal handling to ensure a notetsleepg() thread can wake up
to run the mDoFixup() function.
Fixes#43149
Change-Id: I6651b25bc44a4de47d3fb71d0293d51aef8b79c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/277434
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Under linux+cgo, OS threads are launched via pthread_create().
This abstraction, under linux, requires we avoid blocking
signals 32,33 and 34 indefinitely because they are needed to
reliably execute POSIX-semantics threading in glibc and/or musl.
When blocking signals the go runtime generally re-enables them
quickly. However, when a thread exits (under cgo, this is
via a return from mstart()), we avoid a deadlock in C-code by
not blocking these three signals.
Fixes#42494
Change-Id: I02dfb2480a1f97d11679e0c4b132b51bddbe4c14
Reviewed-on: https://go-review.googlesource.com/c/go/+/269799
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
By default (and with -mod=readonly), the go command imports an error
if a package provided by an implicitly required module is
imported by a package in the main module. This import requires an
update to go.mod: the module must be required explicitly.
The package loader now provides a hint that 'go get' should be run on
the importing package. This is preferred to 'go get' on the imported
package, since that would add an "// indirect" requirement.
For #43131
Change-Id: I0b353ce8ac8c4ddf1a9863544dfaf6c1964daf42
Reviewed-on: https://go-review.googlesource.com/c/go/+/279528
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The Go PE linker does not support enough generalized PE logic to
properly handle .rsrc sections gracefully. Instead a few things are
special cased for these. The linker also does not support PE's "grouped
sections" features, in which input objects have several named sections
that are sorted, merged, and renamed in the output file. In the past,
more sophisticated support for resources or for PE features like grouped
sections have not been necessary, as Go's own object formats are pretty
vanilla, and GNU binutils also produces pretty vanilla objects where all
sections are already merged.
However, GNU binutils is lagging with arm support, and here LLVM has
picked up the slack. In particular, LLVM has its own rc/cvtres combo,
which are glued together in mingw LLVM distributions as windres, a
command line compatible tool with binutils' windres, which supports arm
and arm64. But there's a key difference between binutils' windres and
LLVM's windres: the LLVM one uses proper grouped sections.
So, this commit adds grouped sections support for resource sections to
the linker. We don't attempt to plumb generic support for grouped
sections, just as there isn't generic support already for what resources
require. Instead we augment the resource handling logic to deal with
standard two-section resource objects.
We also add a test for this, akin to the current test for more vanilla
binutils resource objects, and make sure that the rsrc tests are always
performed.
Fixes#42866.
Fixes#43182.
Change-Id: I059450021405cdf2ef1c195ddbab3960764ad711
Reviewed-on: https://go-review.googlesource.com/c/go/+/268337
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
In issue11656.go, it tests that if the runtime can get a
reasonable traceback when it faults at a non-function PC. It does
it by jumping to an address that contains an illegal or trap
instruction. When it traps, the SIGTRAP crashes the runtime.
This CL changes it to use an instruction that triggers SIGSEGV.
This is due to two reasons:
- currently, the handling of bad PC is done by preparePanic,
which is only used for a panicking signal (SIGSEGV, SIGBUS,
SIGFPE), not a fatal signal (e.g. SIGTRAP).
- the test uses defer+recover to get a traceback, which only
works for panicking signals, not fatal signals.
Ideally, we should handle all kinds of faults (SIGSEGV, SIGBUS,
SIGILL, SIGTRAP, etc.) with a nice traceback. I'll leave this
for the future.
This CL also adds RISCV64 support.
Fixes#43283.
Change-Id: I5e0fbf8530cc89d16e05c3257d282bc1d4d03405
Reviewed-on: https://go-review.googlesource.com/c/go/+/279423
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Go 1.15 pack's r command creates the output file if it does not
exist. The system "ar" command does this as well. Do the same.
For bazelbuild/rules_go#2762.
Change-Id: Icd88396b5c714b735c859a29ab29851e4301f4d2
Reviewed-on: https://go-review.googlesource.com/c/go/+/279516
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The FreeBSD syscall convention uses the carry flag to indicate whether
an error has occured. The sys_umtx_op, thr_new, and pipe2 syscall
wrappers were failing to account for this convention and silently
suppressing errors as a result. This commit corrects these wrappers
by copying the pattern used by the other fallible syscall wrappers.
Note that futexsleep1 must now explicitly ignore the ETIMEDOUT error
from sys_umtx_op. Previously ETIMEDOUT was implicitly ignored because
sys_umtx_op never returned an error.
Fixes#43106.
Change-Id: I9c422b87cf4c6d308003bf42c3b419f785578b5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/276892
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Than McIntosh <thanm@google.com>
Treat the compiler's -linkobj output as "compiler object, which
means "pack c" will "see through" the file and add individual
entry to the new archive, instead of the object as a whole.
This is somewhat peculiar. But Go 1.15's cmd/pack does this,
although seemingly accidental. We just do the same. FWIW, it
does make things more consistent with/without -linkobj flag.
Fixes#43271.
Change-Id: I6b2d99256db7ebf0fa430f85afa7464e334f6bcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/279483
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
May fix#43302.
Change-Id: I6b7ddf94495c4fa80cf8a50a38eef5f8b2872669
Reviewed-on: https://go-review.googlesource.com/c/go/+/279481
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change adds two examples of using the Read function: one that reads
one metric and one that reads all metrics.
Change-Id: I4940a44c9b1d65f3f7a1554e3145ff07e6492fc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/275855
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Trust: Michael Knyszek <mknyszek@google.com>
On darwin, where we use libc for syscalls, when the runtime exits,
it calls libc exit function, which may call back into user code,
e.g. invoking functions registered with atexit. In particular, it
may call back into Go. But at this point, the Go runtime is
already exiting, so this wouldn't work.
On non-libc platforms we use exit syscall directly, which doesn't
invoke any callbacks. Use _exit on darwin to achieve the same
behavior.
No test for now, as it doesn't pass on all platforms (see trybot
run of PS2).
May fix#42465.
May fix#43294.
Change-Id: Ia1ada22b5da8cb64fdd598d0541eb90e195367eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/269378
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The netbsd kernel has a bug [1] that occassionally prevents netpoll from
waking with netpollBreak, which could result in missing timers for an
unbounded amount of time, as netpoll can't restart with a shorter delay
when an earlier timer is added.
Prior to CL 232298, sysmon could detect these overrun timers and
manually start an M to run them. With this fallback gone, the bug
actually prevents timer execution indefinitely.
As a workaround, we add back sysmon detection only for netbsd.
[1] https://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=50094
Updates #42515
Change-Id: I8391f5b9dabef03dd1d94c50b3b4b3bd4f889e66
Reviewed-on: https://go-review.googlesource.com/c/go/+/277332
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Michael Pratt <mpratt@google.com>
This was part of a performance improvement made by CL 232298 to
reduce timer latency. On multiprocessor Plan 9 machines, it triggers
memory faults often enough that the builder test suite never completes
successfully. See issue #42303 for discussion. As shown by the benchmark
result below, worst case latency on plan9_arm is very bad even with the
wakep call in place - in the tickers-per-P=1 case, a 3ms timer is 270ms late.
Skipping the wakep call and running the benchmark again shows some cases
worse, some better. The performance cost doesn't seem excessive for this
temporary workaround which makes the plan9_arm builders usable again.
With wakep call:
cpu% go test -bench Latency time
goos: plan9
goarch: arm
pkg: time
BenchmarkParallelTimerLatency-4 100 10985859 avg-late-ns 18630963 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=1-4 195 270294688 avg-late-ns 542057670 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=2-4 234 182452000 avg-late-ns 423933688 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=3-4 280 193003004 avg-late-ns 408034405 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=4-4 282 132819086 avg-late-ns 313624570 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=5-4 339 71152187 avg-late-ns 189014519 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=6-4 315 26860484 avg-late-ns 101759844 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=7-4 357 19106739 avg-late-ns 59435620 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=8-4 376 7246933 avg-late-ns 38888461 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=9-4 267 40476892 avg-late-ns 205851926 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=10-4 294 87836303 avg-late-ns 252059695 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=2ms/tickers-per-P=1-4 379 4127144 avg-late-ns 10494927 max-late-ns
Without wakep call:
BenchmarkParallelTimerLatency-4 61 10775151 avg-late-ns 18668517 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=1-4 199 299587535 avg-late-ns 597182307 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=2-4 272 184561831 avg-late-ns 449739837 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=3-4 235 154983257 avg-late-ns 370940553 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=4-4 290 150034689 avg-late-ns 332399843 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=5-4 298 47540764 avg-late-ns 133709031 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=6-4 350 20379394 avg-late-ns 81742809 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=7-4 363 14403223 avg-late-ns 98901212 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=8-4 375 12293090 avg-late-ns 50266552 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=9-4 336 40628820 avg-late-ns 150946099 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=300µs/tickers-per-P=10-4 289 88265539 avg-late-ns 280770418 max-late-ns
BenchmarkStaggeredTickerLatency/work-dur=2ms/tickers-per-P=1-4 375 8364937 avg-late-ns 22598421 max-late-ns
Fixes#42303
Change-Id: I70c63cb2a2bad46950a7cd9dfc7bb32943710d32
Reviewed-on: https://go-review.googlesource.com/c/go/+/275672
Reviewed-by: David du Colombier <0intro@gmail.com>
Trust: Michael Pratt <mpratt@google.com>
For #11656
For #43283
Change-Id: I1fcf2b24800f421e36201af43130b487abe605b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/279312
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Previously, reassigned was failing to detect reassignments due to
channel receives in select statements (OSELRECV, OSELRECV2), or due to
standalone 2-value receive assignments (OAS2RECV). This was reported
as a devirtualization panic, but could have caused mis-inlining as
well.
Fixes#43292.
Change-Id: Ic8079c20c0587aeacff9596697fdeba80a697b12
Reviewed-on: https://go-review.googlesource.com/c/go/+/279352
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
The issue11656 code was using the trap instruction as a PC value,
but it is intended to call a PC value that contains the trap instruction.
It doesn't matter too much as in practice the address is not
executable anyhow. But may as well have the code act the way it
is documented to act.
Also, don't run the test with gccgo/GoLLVM, as it can't work.
The illegal instruction will have no unwind data, so the unwinder
won't be able to get past it. In other words, gccgo/GoLLVM suffer
from the exact problem that the issue describes, but it seems insoluble.
For golang/go#11656
Change-Id: Ib2e50ffc91d215fd50e78f742fafe476c92d704e
Reviewed-on: https://go-review.googlesource.com/c/go/+/278473
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The language spec only requires a signed binary exponent of 16 bits
for floating point constants. Permit a "exponent too large" error for
larger exponents.
Don't run test 11326b with gccgo, as it requires successful compilation
of floating point constants with exponents that don't fit in 16 bits.
Change-Id: I98688160c76864aba525a151a14aaaf86bc36a6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/279252
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 243940 accidentally broke TestDependencies such that it always passed.
Make it work again, and add a test so that it won't break in the same way.
This revealed that the new embed package was missing from TestDepencies,
so add it.
Fixes#43249
Change-Id: I02b3e38dd35ad88880c4344d46de13b7639aa4c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/279073
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Historically the os package has not imported the strings package.
That was enforced by go/build.TestDependencies, but that test
was accidentally broken (#43249). A dependency of os on strings
was accidentally added by CL 266364; remove it.
For #42026
For #43249
Change-Id: If932308f30561fdcc5c608d7563e849c0d2870d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/279072
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Test failures started to happen sporadically on some builds after the introduction of NotifyContext.
To make these tests more robust and avoid the risk of crosstalk we run them in a separate process.
Fixes#41561.
Change-Id: Ia7af105c316afd11765358f1e5e253ccfe2adc2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/270198
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Cherry Zhang <cherryyz@google.com>
When doing external linking on Windows, auto-detect the linker flavor
(bfd vs gold vs lld) and when linking with "lld", avoid the use of
"-T" (linker script), since this option is not supported by lld.
[Note: the Go linker currently employs -T to ensure proper placement
of the .debug_gdb_scripts section, to work around issues in older
versions of binutils; LLD recognizes this section and does place it
properly].
Updates #39326.
Change-Id: I3ea79cdceef2316bf86eccdb60188ac3655264ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/278932
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Change the run.go driver to recognize the "gc" build tag.
Change existing tests to use the "gc" build tag if they use some
feature that seems specific to the gc compiler, such as passing specific
options to or expecting specific behavior from "go tool compile".
Change tests to use the "!gccgo" build tag if they use "go build" or
"go run", as while those might work with compilers other than gc, they
won't work with the way that gccgo runs its testsuite (which happens
independently of the go command).
For #43252
Change-Id: I666e04b6d7255a77dfc256ee304094e3a6bb15ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/279052
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 269697 was created before CL 276454 and submitted after,
so the api/go1.16.txt file needs to be updated accordingly
to fix the build.
Updates #32406.
Change-Id: I6bf79cc981be504e0baefa82982814aaee4434dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/278992
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Trust: Katie Hockman <katie@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Change-Id: Id7d242ddd4b80a763787513d0a658dd7aea9db7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/276454
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
This is a port of CL 278132 from the dev.typeparams branch. A notable
addition is a new error code, since no existing codes made sense and we
have an analogous code for type switches.
Fixes#43110
Change-Id: I22b3f9d8777063223f82785504e8b7d299bc5216
Reviewed-on: https://go-review.googlesource.com/c/go/+/278813
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Robert Findley <rfindley@google.com>
Mach-O relocation addend is signed 24-bit. When external linking,
if the addend is larger, we cannot put it directly into a Mach-O
relocation. This CL handles large addend by creating "label"
symbols at sym+0x800000, sym+(0x800000*2), etc., and emitting
Mach-O relocations that target the label symbols with a smaller
addend. The label symbols are generated late (similar to what
we do for RISC-V64).
One complexity comes from handling of carrier symbols, which does
not track its size or its inner symbols. But relocations can
target them. We track them in a side table (similar to what we
do for XCOFF, xcoffUpdateOuterSize).
Fixes#42738.
Change-Id: I8c53ab2397f8b88870d26f00e9026285e5ff5584
Reviewed-on: https://go-review.googlesource.com/c/go/+/278332
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
When testing if a flag (e.g. "-no-pie") is supported by the
external linker, pass arch-specific flags (like "-marm").
In particular, on the ARM builder, if CGO_LDFLAGS=-march=armv6
is set, the C toolchain fails to build if -marm is not passed.
# cc -march=armv6 1.c
1.c: In function 'main':
1.c:3:1: sorry, unimplemented: Thumb-1 hard-float VFP ABI
int main() {
^~~
This makes the Go linker think "-no-pie" is not supported when it
actually is.
Passing -marm makes it work.
Fixes#43202.
Change-Id: I4e8b71f08818993cbbcb2494b310c68d812d6b50
Reviewed-on: https://go-review.googlesource.com/c/go/+/278592
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The code in the new (introduced in 1.15) Go object file reader was
casting a pointer-mmaped-memory into a large array prior to performing
a read of the relocations section:
return (*[1<<20]Reloc)(unsafe.Pointer(&r.b[off]))[:n:n]
For very large object files, this artificial array isn't large enough
(that is, there are more than 1048576 relocs to read), so update the
code to use a larger artifical array size.
Fixes#41621.
Change-Id: Ic047c8aef4f8a3839f2e7e3594bce652ebd6bd5b
Reviewed-on: https://go-review.googlesource.com/c/go/+/278492
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Trust: Than McIntosh <thanm@google.com>
For #40700.
Change-Id: I67dd55b435304e428929c9a54b8881f9b78efdfb
Reviewed-on: https://go-review.googlesource.com/c/go/+/278392
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The transponder sets up a deferred close on accepted connections which
is fine after the client reads all data. However there are no mutexes
nor channels to block the transponder from closing. If the scheduler
runs close before the client read, it will cause an EOF failure.
Fixes#42720
Change-Id: Ic21b476c5efc9265a80a2c6f8484efdb5af66405
Reviewed-on: https://go-review.googlesource.com/c/go/+/273672
Run-TryBot: Meng Zhuo <mzh@golangcn.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Meng Zhuo <mzh@golangcn.org>
Reviewed-by: Damien Neil <dneil@google.com>
Microsoft's linker looks at whether all input objects have an empty
section called @feat.00. If all of them do, then it enables SEH;
otherwise it doesn't enable that feature. So, since around the Windows
XP SP2 era, most tools that make PE objects just tack on that section,
so that it won't gimp Microsoft's linker logic. Go doesn't support SEH,
so in theory, none of this really matters to us. But actually, if the
linker tries to ingest an object with @feat.00 -- which are produced by
LLVM's resource compiler, for example -- it chokes because of the
IMAGE_SYM_ABSOLUTE section that it doesn't know how to deal with. Since
@feat.00 is just a marking anyway, skip IMAGE_SYM_ABSOLUTE sections that
are called @feat.00.
Change-Id: I1d7bfcf6001186c53e2c487c5ac251ca65efefee
Reviewed-on: https://go-review.googlesource.com/c/go/+/268239
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
The gofrontend code sees that the denominator is not zero,
so it computes the values. Dividing zero by a non-zero value
produces zero. The language spec doesn't require any of these
cases to report an error, so make the errors compiler-specific.
Change-Id: I5ed759a3121e38b937744d32250adcbdf2c4d3c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/278117
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
